Weiand
Weiand developed the first ever aluminum intake manifold in 1937. Thirty years later Weiand developed complete blower drives for the GMC 6–71 supercharger. Today, Weiand is still at the forefront of intake manifold and blower development as well as high flow water pumps. To make more power you have to get more air to your engine. Look to Weiand as your power source!
Manifolds
Chevrolet 396-402-427-454-502 std. Deck Big Block Rect. Port TEAM "G" 4500 PART#
DESCRIPTION
WEI7522
2800-8500 rpm BBC, Single 4500, 360°
CARBURETION RECOMMENDATIONS:
Holley 4500 Series "Dominator" Carburetor Installation Notes:
will fit tall blocks w/ spacer plate #8204 TEAM "G" POWER RAM PART#
DESCRIPTION
WEI7530*
2800-7200 rpm SBC, Single 4V, 360°
CARBURETION RECOMMENDATIONS:
WEI7522
650-850 cfm Holley hp Installation Notes:
For use w/ automatic transmission, spacer plate w/ plenum divider (#7460 or #7461) is recommended to develop low RPM vacuum. TEAM "G" TRACK RAM PART#
DESCRIPTION
WEI7532*
2800-7800 rpm SBC, Single 4V, 360°, 3/4" Raised Plenum
CARBURETION RECOMMENDATIONS:
650-850 cfm Holley hp Installation Notes:
WEI7530
2V carburetor adapter (#7467) required for certain circle track classes. * Slight elongation of the four center manifold mounting holes may be required to install on some late-model cylinder heads. HI RAM PART#
DESCRIPTION
WEI1985
2500-7800 rpm BBC, (Rect. Port), Complete
CARBURETION RECOMMENDATIONS:
600-700 cfm Holley hp Installation Notes:
Will fit truck blocks with the use of WEI8204 (Rect. Port) spacer plate kit. HEI ignition will not clear. WEI8218 WATER PUMPS, CHEVROLET
WEI8217
Part#
Description
WEI8217 WEI8218
SBC Aluminum Team G electric water pump satin. Converts to long design with WEI8207 spacers Height: 5-1/16" BBC Aluminum Team G electric water pump, satin Height: 5-3/16"
Weldon
Weldon Pump began in 1942 as a division of the Weldon Tool Company founded in 1918 by Carl Bergstrom. As WWII drew to a close, so too did Weldon Pump's production as the need for military pumps was diminishing. Revitalized by a creative and burgeoning aftermarket, Weldon Pump began production on pumps for general aviation. Business took off and peaked in 1979 with the production of over 12,000 aircraft pumps. 1980 brought about our first high performance marine application and the rest is history.
ELECTRIC FUEL PUMP part# Description
WELA2005A WEL600A
Fuel Pump (Electric) 75 GPH Up To 700 H.P. Self Priming Electric Fuel Pump - 60GPH @ 60 psi up to 600 HP 0-100 psi - carb or injection
SWITCHES / CLAMPS / MISCELLANEOUS part# Description
WELK9200-A Oil Cooler Kit - contains pump, clamps, switch & terminals WEL2040-281-A-120 Fuel Pressure Regulator
42 High Tech Boulevard Thomasville, NC 27360 107 Overhill Drive Mooresville, NC 28117
Connect with us on
327