Catalog Mont Blanc

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

S.C. Mont Blanc S.R.L. Automatizari industriale Reprezentant ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 1

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Mont Blanc – uimeste!

Fondata în 1992, Mont Blanc a reusit ca prin calitatea serviciilor, preturile si discount-urilor oferite, sa surclaseze competitorii din Romania in materie de produse pneumatice si nu numai.

Intampinand cererea mare de produse industriale din tara cu oferte ce au in componenta lor produse de la firme precum AZ Pneumatica, ASCO Numatics, Vuototecnica, Valbia, AVM Automation, Mont Blanc garanteaza succesul investitiilor in serviciile oferite.

Misiunea noastra – clientul multumit!

Cu o misiune ce pune pe prim loc clientul, gasirea celor mai bune solutii pentru acestia reprezinta o prioritate. Ne definesc adaptabilitatea, perfectionismul si puterea de a cauta si gasi solutii. Acestea, combinate cu entuziasmul si tenacitatea tinerei echipe din Mont Blanc nu pot impune decat un singur curs – unul ascendent.

Diversitatea – un raspuns afirmativ catre toti potentialii client Mont Blanc numără peste 8000 de produse industriale, pe care le poate pune la dispotiţie in cel mai scurt timp si la cel mai bun pret, produse la care poate oferi si consultanta tehnica.

Reprezentant principal in Romania al unor firme europene cu prestanta si longevitate pe pietele internationale, Mont Blanc promoveaza profesionalismul si seriozitatea.

Inovatia – prioritatea noastra Mereu in pas cu cerintele clientilor care activeaza in domeniu, Mont Blanc este mereu pregatita pentru a onora comenzi dintre cele mai diverse. Studiile de piata realizate periodic ne ajuta sa ne imbogatim linia de produse oferite, pe site-ul nostru putand vedea o prezentare succinta a acestora, precum si a firmelor care le produc.

Ambitia noastra – abilitatea de a oferi cele mai bune servicii posibile raportate la pret-calitate Cu cea mai buna oferta de pe piata interna, promptitudinea livrarii comenzilor, seriozitatea si deschiderea catre nou, am reusit in cativa ani sa realizam parteneriate cu furnizori europeni certificati si recunoscuti la nivel mondial si sa ne dublam astfel numarul clientilor. Privind mereu spre viitor, dar bazandu-ne pe experienta castigata, putem sa va oferim o alternativa viabila la cerintele dumneavoasta!

Contactati-ne si impreuna vom gasi cea mai buna solutie!

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 2

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories

Made in

Cuplaje rapide - Quick Couplers

Racorduri - Fittings

Racorduri stut poliamida (PA) si polimer (POM)

Racorduri tuburi - teava

Amortizoare zgomot

Unitati de preparare aer, regulatoare aer, lubrificatoare aer

Presostate, manometre,pistoale de umflat roti

Pistoale de vopsit, de suflat, minirobineti, electrovalve, tuburi

Coliere, banda teflon, distribuitoare aer

Actuatori,valve,pedale,bobine

Cilindri pneumatici

Asco vane 2/2 actionare pneumatica

Valve cu actuatori

Tratare aer

Compresoare aer Krug powered by FIAC

Scule pneumatice

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 3

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories

Made in

Cuplaje rapide - Quick Couplers GU 10

Cupla mama universala filet ext. ( Multi Profile Quick Coupler male) Cod Caracteristici GU100014 Filet ext. G1/4 (male) GU100038 Filet ext. G3/8 (male) GU100012 Filet ext. G1/2 (male)

GD 60

Cupla tata filet ext.erior ( Male plug - german) Cod Caracteristici GD600014 Filet ext. G1/4 (male) GD600038 Filet ext. G3/8 (male) GD600012 Filet ext. G1/2 (male)

GU 20

Cupla mama universala filet int. ( Multi Profile Quick Coupler female) Cod Caracteristici GU200014 Filet int. G1/4 (female) GU200038 Filet int. G3/8 (female) GU200012 Filet int. G1/2 (female)

GD 70

Cupla tata filet int.erior ( Female plug - german) Cod Caracteristici GD700014 Filet int. G1/4 (female) GD700038 Filet int. G3/8 (female) GD700012 Filet int. G1/2 (female)

GU 30

Cupla mama universala arc ( Multi Profile Quick Coupler spring) Cod Caracteristici GU300406 4x6 GU300608 6x8 GU300810 8x10 GU301012 10x12

GD 80

Cupla tata arc ( Male plug with spring - german) Cod Caracteristici GD800406 4x6 GD800608 6x8 GD800810 8x10 GD801012 10x12

GU 40

Cupla mama universala stut ( Multi Profile Quick Coupler tailpiece) Cod Caracteristici GU400006 Stut Ø 6 GU400008 Stut Ø 8 GU400010 Stut Ø 10 GU400013 Stut Ø 13

GD 90

Cupla tata cu stut ( Male plug tailpiece - german) Cod Caracteristici GD900006 Stut Ø 6 GD900008 Stut Ø 8 GD900010 Stut Ø 10 GD900013 Stut Ø 13

GU 50

Cupla mama universala cauciuc ( Multi Profile Quick Coupler rubber) Cod Caracteristici GU500612 6x12 GU500815 8x15 GU500817 8x17 GU501015 10x15 GU501017 10x17 GU501019 10x19

GN 85

Cupla tata cauciuc ( Male plug rubber - german) Cod Caracteristici GN850612 6x12 GN850815 8x15 GN850817 8x17 GN851015 10x15 GN851017 10x17 GN851019 10x19

GG 10 / GG 20

Cupla mama gigant ( Giant Quick Coupler M/F ) Cod Caracteristici GG100012 Filet ext. G1/2 (male) GG200012 Filet int. G1/2 (female)

GG 60

Cupla tata gigant (Giant plug male/ tailpiece) Cod Caracteristici GG600012 Filet ext. G1/2 (male) GG600013 Stut Ø 13

GM 20

Cupla mama "Mignon" filet int. ("Mignon" Coupler female) Cod Caracteristici GM200018 Filet int. G1/8 (female) GM200014 Filet int. G1/4 (female)

GM 70

Cupla tata "Mignon" filet int. ("Mignon"plug female) Cod Caracteristici GM700018 Filet int. G1/8 (female) GM700014 Filet int. G1/4 (female)

GM 30

Cupla mama "Mignon" cu arc ("Mignon" Coupler spring) Cod Caracteristici GM300064 4x6 GM300086 6x8 GM300108 8x10

GM 80

Cupla tata "Mignon" cu arc ("Mignon"plug spring) Cod Caracteristici GM800064 4x6 GM800086 6x8 GM800108 8x10

GM 20 - St

Cupla mama "Mignon" Stralis ("Mignon" Stralis Coupler female) Cod Caracteristici GM20200M16 M16x1,5 (female)

GM 20 - Sc Cod GM202180M8

Racord Scania (Scania Joint) Caracteristici G1/8xM8V1-2 (joint)

GM 20 - St Cod GM20218M16

GM 40

AM 60

Racord filet ext. cu arc (Joint male with spring) Cod Caracteristici AM60140608 6x8 F. ext G1/4 (male) AM60140810 8x10 F. ext G1/4 (male) AM60381012 10x12 F. ext G3/8 (male)

AM 75

AM 65

Racord filet ext. cu arc rotativ (Rotating joint male with spring) Cod Caracteristici AM65140608 6x8 F. ext G1/4 (male) AM65140810 8x10 F. ext G1/4 (male)

GM 50

Cupla Stralis ( Stralis Joint) Caracteristici G1/8xM16x1,5 (joint)

Cupla tata "Mignon" stut ("Mignon"plug tailpiece) Cod Caracteristici GM400006 Stut Ø 6 GM400008 Stut Ø 8 Racord filet int. cu arc (Joint female with spring) Cod Caracteristici AM75140608 6x8 F. int. G1/4 (female) AM75140810 8x10 F. int. G1/4 (female) AM75141012 10x12 F. ext G3/8 (female) Cupla mama "Mignon"de panou ("Mignon" Coupler female) Cod Caracteristici GM500064 4x6 GM500086 6x8

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 4

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories

Made in

Racorduri - Fittings AS 69/AS69K

AG 35 / GG 90

Racord filet ext. cu stut (Joint tail male thread) Cod Caracteristici Stut Ø 4.5 - M5 AS69M545 Stut Ø 6 - 1/8 AS69K1806 Stut Ø 6 - 1/4 AS69K1406 Stut Ø 7 - 1/8 AS69K1807 Stut Ø 8 -1/8 AS69K1808 Stut Ø 8 -1/4 AS69K1408 Stut Ø 10 -1/4 AS69K1410 Stut Ø 10 -3/8 AS69K3810 Stut Ø 10 - 1/2 AS69K1210 Stut Ø 12 - 1/4 AS69K1412 Stut Ø 12 - 3/8 AS69K3812 Stut Ø 12 - 1/2 AS69K1212 Stut Ø 14 -3/8 AS69K3814 Stut Ø 14 -1/2 AS69K1214 Stut Ø 16 -1/2 AS69K1216 Stut Ø 16 -3/4 AS69K3416 Stut Ø 20 -1/2 AS69K1220 Stut Ø 20 -3/4 AS69K3420 Stut Ø 22 -3/4 AS69K3422 Stut Ø 25 -3/4 AS69K3425 Stut Ø 25 -1 AS69K0125 Racord filet ext furtun (Joint fitting male threaded for rubber hose) Cod Caracteristici Ø6 - Ø12 - 1/4 AG35140612 Ø8 - Ø17 - 1/4 AG35140817 Ø13 - Ø23 - 1/2 GG901323

AS 58 Cod AS580018 AS580014 AS580038 AS580012 AS 57OR

AS 79 K

Dop cu filet int (plug female) Caracteristici 1/8 1/4 3/8 1/2

Dop cu filet ext + garnitura NBR (Male thread plug + NBR O-ring) Cod Caracteristici AS57ORM5 M5 AS57OR18 1/8 AS57OR14 1/4 AS57OR38 3/8 AS57OR12 1/2 Dop ingropat filet ext (Conical male thread plug) Cod Caracteristici AS79K0018 1/8 AS79K0014 1/4 AS79K0038 3/8 AS79K0012 1/2

AS 57 Cod AS5700M5 AS57K0018 AS57K0014 AS57K0038 AS57K0012 AS57K0034 AS57K0001

Dop cu filet ext (Male thread plug ) Caracteristici M5 1/8 1/4 3/8 1/2 3/4 1

AS 72

Racord filet int. cu stut (Joint tail female thread) Cod Caracteristici Stut Ø 6 - INT 1/4 AS721406 Stut Ø 8 - INT 1/4 AS721408 Stut Ø 10 -INT 1/4 AS721410 Stut Ø 10 -INT 3/8 AS723810 Stut Ø 12 -INT 3/8 AS723812 Stut Ø 14 -INT 3/8 AS723814

AS 69D Cod AS69D0006 AS69D0008 AS69D0010 AS69D0014 AS 73

Racord prelungitor filet ext-int (M/F extension reducer) Cod Caracteristici AS731842 1/8-1/8 L=42 mm AS731427 1/4-1/4 L=27 mm AS731435 1/4-1/4 L=35 mm

Cod AG500014

Garnitura racord baioneta (Bayonet joint gasket) Cod Caracteristici AG450001 1/4

AS 82K

Niplu olandez (Taper nipple brass not nichel- plated) Cod Caracteristici AS821414 1/4 AS823838 3/8 AS821212 1/2 Niplu olandez nichelat (Conic "fitting"nipple nichel plated) Cod Caracteristici AS82K1414 1/4

Saiba aluminiu (Spacer washer ALU) Caracteristici 1/8 1/4 3/8 1/2

AS 91 Cod AS910018 AS910014 AS910038 AS910012 AS 91N

Saiba NYLON (Spacer washer NYLON black or white) Cod Caracteristici AS91N00M5 M5 AS91N0018 1/8 AS91N0014 1/4 AS91N0038 3/8 AS91N0012 1/2

AS 92C

Saiba NYLON dantelat neagra (Spacer washer NYLON black) Cod Caracteristici AS92C00M5 M5 AS92C0018 1/8 AS92C0014 1/4 AS92C0038 3/8 AS92C0012 1/2

AS 91P Cod AS91P0018 AS91P0014 AS91P0038 AS91P0012 AS 77

AS 82

Piulita frezata (Milled nut) Caracteristici 1/4

AG 50

AG 45

Racord stut dublu (Double union) Caracteristici Stut Ø 6 Stut Ø 8 Stut Ø 10 Stut Ø 14

Cod AS770018 AS770014 GM 52

Saiba PTFE (Spacer washer PTFE white) Caracteristici 1/8 1/4 3/8 1/2

Racord panou (Female bulkhead connector) Caracteristici 1/8 M16x1,5 1/4 M20x1,5

Racord panou (Pass wall joint) Cod Caracteristici GM520018 1/8 4x6

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 5

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories AS 54 / AS 54K

AS 55 / AS 55K

Reductie conica (Conical male thread reducer) Caracteristici Cod 1/8 - M5 AS5418M5 1/4 - 1/8 AS54K1418 3/8 - 1/8 AS54K3818 3/8 - 1/4 AS54K3814 1/2 - 1/8 AS54K1218 1/2 - 1/4 AS54K1214 1/2 - 3/8 AS54K1238 3/4 - 3/8 AS54K3438 3/4 - 1/2 AS54K3412 1 - 1/2 AS54K0112 1 - 3/4 AS54K0134 1 1/4 - 1/2 AS54K11412 1 1/4 - 3/4 AS54K11434 1 1/4 - 1 AS54K11401 1 1/2 - 1 AS540121G 1 1/2 - 1 1/4 AS542141G 2-1 AS540201G 2 - 1 1/4 AS540241G 2 - 1 1/2 AS540221G Majorare conica nichelata (Conical adaptor M/F) Cod Caracteristici M5 - 1/8 AS55M518 1/8 - 1/8 AS55K1818 1/8 - 1/4 AS55K1814 1/8 - 3/8 AS55K1838 1/4 -1/4 AS55K1414 1/4 - 3/8 AS55K1438 1/4 - 1/2 AS55K1412 3/8 - 3/8 AS55K3838 3/8 - 1/2 AS55K3812 1/2 -1/2 AS55K1212 1/2- 3/4 AS55K1234 3/4 -3/4 AS55K3434 3/4 - 1 AS55K3401 1-1 AS55K0101

AS 61 Cod AS610018 AS610014 AS610038 AS610012 AS610034 AS610001 AS 62K

AS 63K

Racord T filet int ("T" joint 3 female) Caracteristici 1/8 - 1/8 1/4 - 1/4 3/8 - 3/8 1/2 - 1/2 3/4 - 3/4 1-1

Racord T filet ext central ("T" joint 2 female - 1 male conical) Cod Caracteristici AS62K0018 1/8 - 1/8 AS62K0014 1/4 - 1/4 AS62K0038 3/8 - 3/8 AS62K0012 1/2 - 1/2 AS62K0034 3/4 - 3/4 AS62K0001 1-1 Racord T filet ext lateral ("T" joint 1 male conical - 2 female) Cod Caracteristici AS63K0018 1/8 - 1/8 AS63K0014 1/4 - 1/4 AS63K0038 3/8 - 3/8 AS63K0012 1/2 - 1/2 AS63K0034 3/4 - 3/4 AS63K0001 1-1

AS 66K Cod AS66K0018 AS66K0014

Racord T filet ext ("T" joint 3 male conical) Caracteristici 1/8 - 1/8 1/4 - 1/4

Made in

AS 51 / AS 52

Niplu conic nichelat (Conical thread nipple ) Cod Caracteristici M5 -M5 AS51M5M5 M5 - 1/8 AS51M518 1/8 - 1/8 AS52K1818 1/8 - 1/4 AS52K1814 1/8 - 3/8 AS52K1838 1/8 - 1/2 AS52K1812 1/4 - 1/4 AS52K1414 1/4 - 3/8 AS52K1438 1/4 - 1/2 AS52K1412 3/8 - 3/8 AS52K3838 3/8 - 1/2 AS52K3812 1/2- 1/2 AS52K1212 1/2 - 3/4 AS52K1234 3/4 - 3/4 AS52K3434 3/4 - 1 AS52K3401 1-1 AS52K0101

AS 53

Racord mufa cilindrica (Cylindrical threaded connector) Cod Caracteristici M5 - M5 AS53M5M5 1/8 - 1/8 AS531818 1/4 - 1/4 AS531414 3/8 - 3/8 AS533838 1/2 - 1/2 AS531212 3/4- 3/4 AS533434 1-1 AS530101

AS 56

Racord mufa cilindrica redusa (Cylindrical threaded connector) Cod Caracteristici AS56M518 M5 - 1/8 AS561814 1/8 - 1/4 AS561838 1/8 - 3/8 AS561812 1/8 - 1/2 AS561438 1/4 - 3/8 1/4 - 1/2 AS561412 3/8 - 1/2 AS563812 3/4 - 1/2 AS563412 1 - 1/2 AS560112 1 - 3/4 AS560134

AS 59 Cod AS590018 AS590014 AS590038 AS590012 AS590034 AS590001 AS 60K

Racord L filet ext - int ("L" joint male conical - female) Cod Caracteristici AS60K0018 1/8 - 1/8 AS60K0014 1/4 - 1/4 AS60K0038 3/8 - 3/8 AS60K0012 1/2 - 1/2 AS60K0034 3/4 - 3/4 AS60K0001 1-1

AS 65K Cod AS65K0018 AS65K0014

RV 28

Racord L filet int ("L" joint female) Caracteristici 1/8 - 1/8 1/4 - 1/4 3/8 - 3/8 1/2 - 1/2 3/4 - 3/4 1-1

Racord L filet ext ("L" joint conical male) Caracteristici 1/8 - 1/8 1/4 - 1/4

Robinet purjare (Draining valve male thread) Cod Caracteristici RV280014 1/4 - 1/4 RV280038 1/8 - 1/8

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 6

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories AS 67K

Racord T filet int central ("T" joint 2 male conical - 1 female) Cod Caracteristici AS67K0014 1/4 - 1/4 AS67K0012 1/2 - 1/2

RE 15 Cod RE150000 RE 20

AS 75K

Racord Y filet ext central ("Y" joint central conical male) Cod Caracteristici AS75K0018 1/8 - 1/8 AS75K0014 1/4 - 1/4 AS75K0038 3/8 - 3/8 AS75K0012 1/2 - 1/2

Cod AS760018 AS760014 AS760038 AS760012

Racord Y filet int ("Y" joint female) Caracteristici 1/8 - 1/8 1/4 - 1/4 3/8 - 3/8 1/2 - 1/2

Cod AS640018 AS640014 AS640038 AS640012

Racord cruce filet int (Cross joint 4 female) Caracteristici 1/8 - 1/8 1/4 - 1/4 3/8 - 3/8 1/2 - 1/2

AS 76

AS 64

AS 70K

RE 30

RE 25

Racord cruce filet 1 ext - 3 int. (Cross joint 3 female - 1 male conical) Cod Caracteristici AS70K0018 1/8 - 1/8 AS70K0014 1/4 - 1/4 AS70K0038 3/8 - 3/8 AS70K0012 1/2 - 1/2 RE 35

Made in

Dop baioneta gigant (Giant Bayonet plug) Caracteristici

Racord baioneta gigant filet ext (Giant Bayonet coupler male threaded) Cod Caracteristici RE200038 3/8 RE200012 1/2 RE200034 3/4 RE200001 1 RE200114 1 1/4 RE200112 1 1/2 Racord baioneta gigant stut (Giant Bayonet coupler tail) Cod Caracteristici RE300013 Ø 13 RE300015 Ø 15 RE300018 Ø 18 RE300020 Ø 20 RE300025 Ø 25 RE300030 Ø 30 RE300032 Ø 32 RE300035 Ø 35 RE300040 Ø 40 Racord baioneta gigant filet int (Giant Bayonet coupler female threaded) Cod Caracteristici RE250038 3/8 RE250012 1/2 RE250034 3/4 RE250001 1 RE250114 1 1/4 RE250112 1 1/2 Garnitura baioneta gigant (Giant Bayonet O-ring) Cod Caracteristici RE350000 cauciuc

Racorduri stut poliamida (PA) si polimer (POM) - Hose addapter polyamide and polyacetal copolymer AP 10K

Racord stut filet ext. (Joint tail male thread) Cod Caracteristici 1/8 - Ø 4 AP10K1804 1/8 - Ø 6 AP10K1806 1/4 - Ø 6 AP10K1406 1/4 - Ø 8 AP10K1408

AP 25K

Racord stut dublu (Double union) Caracteristici Ø4 Ø6 Ø8 Ø 10

AP 45

Cod AP300004 AP300006 AP300008 AP300010

Racord stut L dublu (Double "L" joint tail) Caracteristici Ø4 Ø6 Ø8 Ø 10

AP 55

Cod AP400004 AP400006 AP400008 AP400010

Cod AP650004 AP650006

Racord stut cruce (Cross joint tail) Caracteristici Ø4 Ø6

AP 30

AP 40

AP 65

Racord stut "T" filet ext central (Joint tail "T" central male thread) Cod Caracteristici 1/8 - Ø 4 AP25K1804 1/8 - Ø 6 AP25K1806 1/4 - Ø 6 AP25K1406 1/4 - Ø 8 AP25K1408

Cod AP450004 AP450006 AP450008 AP450010

Racord stut "T" (Joint tail "T") Caracteristici Ø4 Ø6 Ø8 Ø 10

Cod AP550004 AP550006 AP550008 AP550010

Racord stut "Y" (Joint tail "Y") Caracteristici Ø4 Ø6 Ø8 Ø 10

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 7

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories

Made in

Racorduri tuburi - teava - Fittings for pneumatic tubes (nickeled brass and polymer quick fittings, push-in and compression) DP 79

DP 78

DP 83

DP 81

RF 22

RF 30

Regulator polimer flux cilindru (Plastic flow regulator for cylinders ) Cod Caracteristici M5 - 4 DP79PM504 1/8 - 4 DP79P1804 1/4 - 4 DP79P1404 M5- 6 DP79PM506 1/8 - 6 DP79P1806 1/4 - 6 DP79P1406 3/8 - 6 DP79P3806 1/2 - 6 DP79P1206 1/8 - 8 DP79P1808 1/4 - 8 DP79P1408 3/8 - 8 DP79P3808 1/2 - 8 DP79P1208 1/8- 10 DP79P1810 1/4- 10 DP79P1410 3/8 - 10 DP79P3810 1/2- 10 DP79P1210 1/4 - 12 DP79P1412 3/8 - 12 DP79P3812 1/2 - 12 DP79P1212 Regulator polimer flux valva (Plastic flow regulator for valves ) Cod Caracteristici M5 - 4 DP78PM504 1/8 - 4 DP78KP1804 1/4 - 4 DP78KP1404 M5- 6 DP78PM506 1/8 - 6 DP78KP1806 1/4 - 6 DP78KP1406 3/8 - 6 DP78KP3806 1/2 - 6 DP78KP1206 1/8 - 8 DP78KP1808 1/4 - 8 DP78KP1408 3/8 - 8 DP78KP3808 1/2 - 8 DP78KP1208 1/8- 10 DP78KP1810 1/4- 10 DP78KP1410 3/8 - 10 DP78KP3810 1/2- 10 DP78KP1210 1/4 - 12 DP78KP1412 3/8 - 12 DP78KP3812 1/2 - 12 DP78KP1212 Regulator polimer flux cilindru orientabil (Flow regulator for cylinders ) Cod Caracteristici 1/8 - 6 DP83P1806 1/8 - 8 DP83P1808 1/4 - 8 DP83P1408 1/4 - 10 DP83P1410 Regulator polimer flux unidirectional (Flow regulator unidirectional ) Cod Caracteristici 4 DP810400 6 DP810600 8 DP810800 10 DP811000 12 DP811200 Supapa unisens polimer push-in (Union connector check valve) Cod Caracteristici 4 RF220004 6 RF220006 8 RF220008 10 RF220010 12 RF220012 Robinet 3/2 polimer push-in (Hand valve in polymer) 6 RF300006 8 RF300008 10 RF300010 12 RF300012

DT 79

Regulator metalic flux cilindru (Brass flow regulator for cylinders ) Cod Caracteristici M5 - 4 DT79M504 1/8 - 4 DT791804 1/8 - 5 DT791805 M5- 6 DT79M506 1/8 - 6 DT791806 1/4 - 6 DT791406 1/8 - 8 DT791808 1/4 - 8 DT791408 3/8 - 8 DT793808 1/4- 10 DT791410 3/8 - 10 DT793810 3/8 - 12 DT793812 1/2 - 12 DT791212 1/2 - 14 DT791412

DT 78

Regulator metalic flux valva (Brass flow regulator for valves) Cod Caracteristici M5 - 4 DT78M504 1/8 - 4 DT781804 1/8 - 5 DT781805 M5- 6 DT78M506 1/8 - 6 DT781806 1/4 - 6 DT781406 1/8 - 8 DT781808 1/4 - 8 DT781408 3/8 - 8 DT783808 1/4- 10 DT781410 3/8 - 10 DT783810 3/8 - 12 DT783812

DT 80

Regulator metalic flux bidirectional (Brass flow regulator bidirectional) Cod Caracteristici M5 - 4 DT80M504 1/8 - 4 DT801804 1/8 - 5 DT801805 M5- 6 DT80M506 1/8 - 6 DT801806 1/4 - 6 DT801406 1/8 - 8 DT801808 1/4 - 8 DT801408 3/8 - 8 DT803808 1/4- 10 DT801410 3/8 - 10 DT803810 3/8 - 12 DT803812

DT 81

Regulator metalic flux unidirectional (Line flow control unidirectional) Cod Caracteristici M5 - M5 DT81PM5M5 1/8 - 1/8 DT81P1818 1/4 - 1/4 DT81P1414 3/8 - 3/8 DT81P3838 1/2 - 1/2 DT81P1212

DT 82

Regulator metalic flux bidirectional (Line flow control biidirectional) Cod Caracteristici M5 - M5 DT82PM5M5 1/8 - 1/8 DT82P1818 1/4 - 1/4 DT82P1414 3/8 - 3/8 DT82P3838 1/2 - 1/2 DT82P1212

RV 46

Supapa unisens metalica filet int. (Check valve female thread) Cod Caracteristici M5 - M5 RV4600M5V 1/8 - 1/8 RV460018V 1/4 - 1/4 RV460014V 3/8 - 3/8 RV460038V 1/2 - 1/2 RV460012V

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 8

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories RF 30

RP 51

RP 52

Robinet 3/2 polimer push-in (Hand valve in polymer) 8-6 RF300806 10 - 8 RF301008 12 -10 RF301010 Racord push-in polimer drept ext (Polimer push-in straight male thread) Cod Caracteristici 3 - M3x0,5 "MINI" RP51M303C 3 - M5x0,8 "MINI" RP51M503C 3 - 1/8 "MINI" RP51K1803C 4 - M3x0,5 "MINI" RP51M304C 4 - M5x0,8 "MINI" RP51M503C 4 - M5x0,8 RP51M504 4 - M6x1"MINI" RP51M604C 4 - M6x1 RP51M604 4 - 1/8 "MINI" RP51K1804C 4 - 1/8 RP511804 4 - 1/4 "MINI" RP51K1404C 4 - 1/4 RP511404 4 - 3/8 RP513804 6 - M5x0,8 "MINI" RP51M506C 6- M5x0,8 RP51M506 6 - M6x1"MINI" RP51M606C 6 - M6x1 RP51M606 6 - 1/8 "MINI" RP51K1806C 6 - 1/8 RP511806 6 - 1/4 RP511406 6 - 3/8 RP513806 6 - 1/2 RP511206 8 - 1/8 RP511808 8 - 1/4 RP511408 8 - 3/8 RP513808 8 - 1/2 RP511208 10 - 1/8 RP511810 10 - 1/4 RP511410 10 - 3/8 RP513810 10 - 1/2 RP511210 12 - 1/8 RP511812 12 - 1/4 RP511412 12 - 3/8 RP513812 12 - 1/2 RP511212 14 - 3/8 RP513814 14 - 1/2 RP511214 15 - 3/8 RP513815 15 - 1/2 RP511215 16 - 3/8 RP513816 16 - 1/2 RP511216

RV 47

Caracteristici 4 - M5x0,8 4 - M6x1 4 - 1/8 4 - 1/4 6 - M5x0,8 6 - M6x1 6 - 1/8 6 - 1/4 6 - 3/8 6 - 1/2 8 - 1/8 8 - 1/4 8 - 3/8 8 - 1/2 10 - 1/8 10 - 1/4 10 - 3/8 10 - 1/2 12 - 1/4 12 - 3/8 12 - 1/2

Supapa unisens metalica filet int ext (Check valve M/F thread) Cod Caracteristici 1/8 - 1/8 RV470018V 1/4 - 1/4 RV470014V

RT 51

Racord push-in metalic drept ext (Brass push-in straight male thread) Cod Caracteristici 3 - M3x0,5 RT51M303 3 - M5x0,8 RT51M503 4 - M5x0,8 RT51M504 4 - M6x1 RT51M604 4 - M7x1 RT51M704 4 - 1/8 RT511804 4 - 1/4 RT511404 5 - M5x0,8 RT51M505 5 - 1/8 RT511805 5 - 1/4 RT511405 6 - M5x0,8 RT51M506 6 - M6x1 RT51M606 6 - M7x1 RT51M706 6 - M12x1,25 RT51M12506 6 - M12x1,50 RT51M1256 6 - 1/8 RT511806 6 - 1/4 RT511406 6 - 3/8 RT513806 8 - M12x1,50 RT51M1258 8 - 1/8 RT511808 8 - 1/4 RT511408 8 - 3/8 RT513808 8 - 1/2 RT511208 10 - 1/8 RT511810 10 - 1/4 RT511410 10 - 3/8 RT513810 10 - 1/2 RT511210 12 - 1/4 RT511412 12 - 3/8 RT513812 12 - 1/2 RT511212 14 - 3/8 RT513814 14 - 1/2 RT511214

RT 52

Racord push-in metalic drept int (Brass push-in straight female thread) Cod Caracteristici 4 - M5x0,8 RT52M504 4 - 1/8 RT521804 4 - 1/4 RT521404 5 - 1/8 RT521805 5 - 1/4 RT521405 6 - 1/8 RT521806 6 - 1/4 RT521406 8 - 1/8 RT521808 8 - 1/4 RT521408 10 - 1/8 RT521810 10 - 1/4 RT521410 10 - 3/8 RT523810 10 - 1/2 RT521210 12 - 3/8 RT523812 12 - 1/2 RT521212

Racord push-in polimer drept int (Polimer push-in straight female thread)

Cod RP52M504 RP52M604 RP521804 RP521404 RP52M506 RP52M606 RP521806 RP521406 RP523806 RP521206 RP521808 RP521408 RP523808 RP521208 RP521810 RP521410 RP523810 RP521210 RP521412 RP523812 RP521212

Made in

RT 53

Racord push-in metalic drept (Brass push-in union) Cod Caracteristici 3 RT530003 4 RT530004 5 RT530005 6 RT530006 8 RT530008 10 RT530010 12 RT530012 14 RT530014 RT530604 RT530804 RT530806 RT531004

6-4 8-4 8 -6 10 - 4

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 9

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories RP 53

Racord push-in polimer drept (Polymer push-in union) Cod Caracteristici 3 "MINI" RP530003C 4 "MINI" RP530004C 4 RP530004 6 "MINI" RP530006C 6 RP530006 8 RP530008 10 RP530010 12 RP530012 14 RP530014 15 RP530015 16 RP530016 RP530604 RP530804 RP530806 RP531006 RP531008 RP531208 RP531210

RP 54

RP 55

RT 53

Racord push-in metalic drept (Brass push-in union) Cod Caracteristici 10 - 6 RT531006 10 - 8 RT531008 12 - 8 RT531208 12 - 10 RT531210 14 - 10 RT531410 14 - 12 RT531412

RT 54

Racord push-in metalic "L" (Brass push-in "L") Cod Caracteristici 3 RT540003 4 RT540004 5 RT540005 6 RT540006 8 RT540008 10 RT540010 12 RT540012 14 RT540014

RT 55

Racord push-in metalic "T" (Brass push-in "T") Cod Caracteristici 3 RT550003 4 RT550004 5 RT550005 6 RT550006 8 RT550008 10 RT550010 12 RT550012 14 RT550014

Racord push-in polimer "L" (Polymer push-in "L") Cod Caracteristici 3 "MINI" RP540003C 4 "MINI" RP540004C 4 RP540004 6 "MINI" RP540006C 6 RP540006 8 RP540008 10 RP540010 12 RP540012 14 RP540014 15 RP540015 16 RP540016

RT550604 RT550806 RT551008

Racord push-in metalic tub ext (Brass push-in adapter male) Cod Caracteristici 4 - M5x0,8 RT56M504 4 - M7x1 RT56M704 4 - 1/8 RT561804 4 - 1/4 RT561404 5 - M5 RT56M505 5 - 1/8 RT561805 5 - 1/4 RT561405 6 - M5x0,8 RT56M506 6 - M7x1 RT56M706 6 - 1/8 RT561806 6 -1/4 RT561406 8 -1/8 RT561808 8 -1/4 RT561408 8 -3/8 RT563808 10 -1/8 RT561810 10 -1/4 RT561410 10 -3/8 RT563810 10 -1/2 RT561210 12 -1/4 RT561412 12 -3/8 RT563812 12 -1/2 RT561212 14 -3/8 RT563814 14 -1/2 RT561214

RT 57

Racord push-in metalic drept (Brass double connector) Cod Caracteristici 4 RT570004 5 RT570005 6 RT570006 8 RT570008 10 RT570010 12 RT570012 14 RT570014 6-4 RT570604 8-6 RT570806 12 - 10 RT571210

6-4 8-4 8-6 10 - 6 10 - 8 12 - 8 12 - 10

Racord push-in polimer drept (Polymer double connector) Cod Caracteristici 4 RP570004 6 RP570006 8 RP570008 10 RP570010 12 RP570012 16 RP570016 RP570604 RP570806 RP571008 RP571210 RP571612

6-4 8-6 10 - 8 12 - 10 16 - 12

6-4 8-6 10 - 8

RT 56 Racord push-in polimer "T" (Polymer push-in "T") Cod Caracteristici 3 "MINI" RP550003C 4 "MINI" RP550004C 4 RP550004 6 "MINI" RP550006C 6 RP550006 8 RP550008 10 RP550010 12 RP550012 14 RP550014 15 RP550015 16 RP550016 RP550604 RP550804 RP550806 RP551006 RP551008 RP551208 RP551210 RP 57

6-4 8-4 8-6 10 -6 10 - 8 12 - 8 12 - 10

Made in

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 10

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories RP 58

Reductie push-in polimer drepta (Polymer push-in reducer) Cod Caracteristici 6-4 RP580604 8-4 RP580804 8-6 RP580806 10 - 4 RP581004 10 - 6 RP581006 10 - 8 RP581008 12 - 6 RP581206 12 - 8 RP581208 12 - 6 RP581206 12 - 8 RP581208 12 - 10 RP581210

RP 58I

Majorare push-in polimer drepta (Polymer push-in increaser) Cod Caracteristici 4-6 RP58I0406 6-8 RP58I0608

RP 59 Cod RP590004 RP590006 RP590008 RP590010 RP590012

Dop push-in polimer (Polymer push-in plug) Caracteristici 4 6 8 10 12

RP 60

Racord push-in polimer drept panou (Polymer push-in union panel) Cod Caracteristici 4 (M10x1) RP600004 6 (M14x1) RP600006 8 (M16x1) RP600008 10 (M17x1) RP600010 12 (M20x1) RP600012

RP 62

Racord push-in polimer "L" panou (Polymer push-in "L" panel) Cod Caracteristici 4 (M10x1) RP620004 6 (M14x1) RP620006 8 (M16x1) RP620008 10 (M17x1) RP620010 12 (M20x1) RP620012

RP 63

RP 65

Banjo simplu push-in polimer (Polymer push-in single body) Cod Caracteristici 4 - M5x0,8 RP63M504 4 - M5x0,8(regulator) RP63M504R 4 - 1/8 RP631804 6 - M5x0,8 RP63M506 6 - 1/8 RP631806 6 - 1/4 RP631406 8 - 1/8 RP631808 8 - 1/4 RP631408 8 - 3/8 RP633808 10 - 1/4 RP631410 10 - 3/8 RP633810 Banjo push-in polimer (Polymer push-in single banjo) Cod Caracteristici 4 - M5x0,8 RP65M504 4 - 1/8 RP651804 4 - 1/4 RP651404 6 - M5x0,8 RP65M506 6 - 1/8 RP651806 6 - 1/4 RP651406 6 - 3/8 RP653806 6 - 1/2 RP651206 8 - 1/8 RP651808 8 - 1/4 RP651408 8 - 3/8 RP653808 8 - 1/2 RP651208 10 - 1/8 RP651810 10 - 1/4 RP651410

Made in

RT 58

Reductie push-in metalica drepta (Brass push-in reducer) Cod Caracteristici 4-3 RT580403 5-4 RT580504 6-4 RT580604 6-5 RT580605 8-4 RT580804 8-5 RT580805 8-6 RT580806 10 - 4 RT581004 10 - 6 RT581006 10 - 8 RT581008 12 - 4 RT581204 12 - 6 RT581206 12 - 8 RT581208 12 - 10 RT581210 14 - 4 RT581404 14 - 6 RT581406 14 - 8 RT581408 14 - 10 RT581410 14 - 12 RT581412

RT 58I

Majorare push-in metalica drepta (Brass push-in increaser) Cod Caracteristici 4-6 RT58I0406 6-8 RT58I0608

RT 59

Dop push-in metalic drept (Brass push-in plug) Cod Caracteristici 4 RT590004 5 RT590005 6 RT590006 8 RT590008 10 RT590010 12 RT590012 14 RT590014

RT 60

Racord push-in metalic drept panou (Brass push-in union panel) Cod Caracteristici 3 (M10x1) RT600003 4 (M10x1) RT600004 5 (M11x1) RT600005 6 (M14x1) RT600006 8 (M16x1) RT600008 10 (M17x1) RT600010 12 (M20x1) RT600012 14 (M22x1) RT600014

RT 63

RT 99

Banjo simplu push-in metalic (Brass push-in single body) Cod Caracteristici 4 - M5x0,8 RT63M504 4 - M5x0,8 (regulator) RT63M504R 4 - 1/8 RT631804 5 - M5x0,8 RT63M505 5 - 1/8 RT631805 6 - M5x0,8 RT63M506 6 - M5x0,8 (regulator) RT63M506R 6 - 1/8 RT631806 6 - 1/4 RT631406 8 - 1/8 RT631808 8 - 1/4 RT631408 8 - 3/8 RT633808 10 - 1/4 RT631410 10 - 3/8 RT633810 12 - 1/4 RT631412 12 - 3/8 RT633812 12 - 1/2 RT631212 14 - 1/2 RT631214 Cruce rotativa push-in metalica (Brass push-in swivelling cross) Cod Caracteristici 6-6 RT990606 8-8 RT990808

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 11

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories RP 65

RP 70

RP 71

Banjo push-in polimer (Polymer push-in single banjo) Cod Caracteristici 10 - 3/8 RP653810 10 - 1/2 RP651210 12 - 1/4 RP651412 12 - 3/8 RP653812 12 - 1/2 RP651212 Racord push-in polimer "T" ext (Polymer push-in "T" central M thread) Cod Caracteristici 3 - M3 "MINI" RP70M303C 3 - M5 "MINI" RP70M503C 3 - 1/8 "MINI" RP701803C 4 - M3 "MINI" RP70M304C 4 - M5 "MINI" RP70M504C 4 - M6 "MINI" RP70M604C 4 - 1/8 "MINI" RP701804C 4 - 1/8 RP701804 4 - 1/4 RP701404 6 - M5 "MINI" RP70M506C 6 - M5 RP70M506 6 - M6 "MINI" RP70M606C 6 - M6 RP70M606 6 - 1/8 "MINI" RP701806C 6 - 1/8 RP701806 6 - 1/4 RP701406 6 - 3/8 RP703806 6 - 1/2 RP701206 8 - 1/8 RP701808 8 - 1/4 RP701408 8 - 3/8 RP703808 8 - 1/2 RP701208 10 - 1/8 RP701810 10 - 1/4 RP701410 10 - 3/8 RP703810 10 - 1/2 RP701210 12 - 1/4 RP701412 12 - 3/8 RP703812 12 - 1/2 RP701212 14 - 3/8 RP703814 14 - 1/2 RP701214 16 - 3/8 RP703816 16 - 1/2 RP701216 Racord push-in polimer "T" ext (Polymer push-in "T" central M thread) Cod Caracteristici 3 - M3 "MINI" RP71M303C 3 - M5 "MINI" RP71M504C 3 - 1/8 "MINI" RP711803C 4 - M3 "MINI" RP71M304C 4 - M5 "MINI" RP71M504 4 - M6 "MINI" RP71M604C 4 - 1/8 "MINI" RP711804C 4 - 1/8 RP711804 4 - 1/4 RP711404 6 - M5 "MINI" RP71M506C 6 - M5 RP71M506 6 - M6 "MINI" RP71M606C 6 - M6 RP71M606 6 - 1/8 "MINI" RP711806C 6 - 1/8 RP711806 6 - 1/4 RP711406 6 - 3/8 RP713806 6 - 1/2 RP711206 8 - 1/8 RP711808 8 - 1/4 RP711408 8 - 3/8 RP713808 8 - 1/2 RP711208 10 - 1/8 RP711810 10 - 1/4 RP711410 10 - 3/8 RP713810

Made in

RT 64

Banjo dublu push-in metalic (Brass push-in double body) Cod Caracteristici 4 - M5x0,8 RT64M504 4 - 1/8 RT641804 5 - M5x0,8 RT64M505 5 - 1/8 RT641805 6 - 1/8 RT641806 6 - 1/4 RT641406 8 - 1/8 RT641808 8 - 1/4 RT641408 8 - 3/8 RT643808 10 - 1/4 RT641410 10 - 3/8 RT643810 12 - 3/8 RT643812 12 - 1/2 RT641212

AS 87

Tija banjo simpla metalica (Brass banjo single stem ) Cod Caracteristici M5x0,8 AS8700M5 1/8 AS870018 1/4 AS870014 3/8 AS870038 1/2 AS870012

AS 88

Tija banjo dubla metalica (Brass banjo double stem ) Cod Caracteristici 1/8 AS880018 1/4 AS880014 3/8 AS880038 1/2 AS880012

AS 89

Tija banjo tripla metalica (Brass banjo triple stem ) Cod Caracteristici 1/8 AS890018 1/4 AS890014 3/8 AS890038

AS 99

Tija banjo simplu metalic int ext (Brass banjo single stem M/F) Cod Caracteristici 1/8 AS990018 1/4 AS990014 3/8 AS990038

AS 99D

Tija banjo dubla metalica int ext (Brass banjo double stem M/F) Cod Caracteristici 1/8 AS99D0018 1/4 AS99D0014 3/8 AS99D0038

RT 65

Banjo simplu push-in metalic (Brass push-in simple body) Cod Caracteristici 3 - M3x0,8 RT65M303 3 - M5x0,8 RT65M503 4 - M5x0,8 RT65M504 4 - 1/8 RT651804 5 - M5x0,8 RT65M505 5 - 1/8 RT651805 6 - 1/8 RT651806 6 - 1/4 RT651406 8 - 1/8 RT651808 8 - 1/4 RT651408 8 - 3/8 RT653808 10 - 1/4 RT651410 10 - 3/8 RT653810 12 - 3/8 RT653812 12 - 1/2 RT651212 14 - 1/2 RT651214

RT 66

Banjo dublu push-in metalic (Brass push-in double body) Cod Caracteristici 4 - M5x0,8 RT66M504 4 - 1/8 RT661804 5 - M5x0,8 RT66M505

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 12

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories RP 71

RP 72

RP 72 P

Racord push-in polimer "T" ext (Polymer push-in "T" central M thread) Cod Caracteristici 10 - 1/2 RP711210 12 - 1/4 RP711412 12 - 3/8 RP713812 12 - 1/2 RP711212 Racord push-in polimer "L" ext (Polymer push-in "L" thread) Cod Caracteristici 3 - M3 "MINI" RP72M303C 3 - M5 "MINI" RP72M503C 3 - 1/8 "MINI" RP721803C 4 - M3 "MINI" RP72M304C 4 - M5 "MINI" RP72M504C 4 - M5 RP72M504 4 - M6 "MINI" RP72M604C 4 - M6 RP72M604 4 - 1/8 "MINI" RP721804C 4 - 1/8 RP721804 4 - 1/4 RP721404 4 - 3/8 RP723804 6 - M5 "MINI" RP72M506C 6 - M5 RP72M506 6 - M6 "MINI" RP72M606C 6 - M6 RP72M606 6 - 1/8 "MINI" RP721806C 6 - 1/8 RP721806 6 - 1/4 "MINI" RP721406C 6 - 1/4 RP721406 6 - 3/8 RP723806 6 - 1/2 RP721206 8 - 1/8 RP721808 8 - 1/4 RP721408 8 - 3/8 RP723808 8 - 1/2 RP721208 10 - 1/8 RP721810 10 - 1/4 RP721410 10 - 3/8 RP723810 10 - 1/2 RP721210 12 - 1/8 RP721812 12 - 1/4 RP721412 12 - 3/8 RP723812 12 - 1/2 RP721212 14 - 3/8 RP723814 14 - 1/2 RP721214 15 - 1/2 RP721215 16 - 1/2 RP721216 Racord push-in polimer "L" ext (Polymer push-in "L" thread) Cod Caracteristici 4 - M5 RP72PM504 4 - M6 RP72PM604 4 - 1/8 RP72P1804 4 - 1/4 RP72P1404 6 - M5 RP72PM506 6 - M6 RP72PM606 6 - 1/8 RP72P1806 6 - 1/4 RP72P1406 6 - 3/8 RP72P3806 6 - 1/2 RP72P1206 8 - 1/8 RP72P1808 8 - 1/4 RP72P1408 8 - 3/8 RP72P3808 8 - 1/2 RP72P1208 10 - 1/8 RP72P1810 10 - 1/4 RP72P1410 10 - 3/8 RP72P3810 10 - 1/2 RP72P1210 12 - 1/8 RP72P1812 12 - 1/4 RP72P1412 12 - 3/8 RP72P3812 12 - 1/2 RP72P1212

Made in

RT 66

Banjo dublu push-in metalic (Brass push-in double body) Cod Caracteristici 5 - 1/8 RT661805 6 - 1/8 RT661806 6 - 1/4 RT661406 8 - 1/8 RT661808 8 - 1/4 RT661408 8 - 3/8 RT663808 10 - 1/4 RT661410 10 - 3/8 RT663810 12 - 3/8 RT663812 12 - 1/2 RT661212

RT 70

Push-in metalic "T" filet ext (Brass push-in "T") Cod Caracteristici 4 - M5x0,8 RT70M504 4 - M7x1 RT70M704 4 - 1/8 RT701804 6 - M5 RT70M506 6 - M7 RT70M706 6 - 1/8 RT701806 6 - 1/4 RT701406 8 - 1/8 RT701808 8 - 1/4 RT701408 8 - 3/8 RT703808 10 - 1/4 RT701410 10 - 3/8 RT703810 10 - 1/2 RT701210 12 - 1/4 RT701412 12 - 3/8 RT703812 12 - 1/2 RT701212 14 - 3/8 RT703814 14 - 1/2 RT701214

RT 71

Push-in metalic "T" filet ext lateral (Brass push-in "T" lateral) Cod Caracteristici 4 - M5x0,8 RT71M504 4 - 1/8 RT711804 4 - 1/4 RT711404 6 - 1/8 RT711806 6 - 1/4 RT711406 8 - 1/8 RT711808 8 - 1/4 RT711408 8 - 3/8 RT713808 10 - 1/4 RT711410 10 - 3/8 RT713810 12 - 1/4 RT711412 12 - 3/8 RT713812 14 - 1/2 RT711214

RT 72

Push-in metalic "L" filet ext (Brass push-in "L" elbow) Cod Caracteristici 3 - M5x0,8 RT72M503 4 - M5x0,8 RT72M504 4 - M6x1 RT72M604 4 - M7x1 RT72M704 4 - 1/8 RT721804 4 - 1/4 RT721404 6 - M5x0,8 RT72M506 6 - M6x1 RT72M606 6 - M7x1 RT72M706 6 - M12x1,25 RT72M1256 6 - M12x1,5 RT72M12156 6 - 1/8 RT721806 6 - 1/4 RT721406 8 - M12X1,5 RT72M12158 8 - 1/8 RT721808 8 - 1/4 RT721408 8 - 3/8 RT723808 8 - 1/2 RT721208 10 - 1/4 RT721410 10 - 3/8 RT723810 10 - 1/2 RT721210

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 13

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories RP 73

RP 74

RP 85

RP 88

Racord push-in polimer "Y" (Polimer push-in "Y") Cod Caracteristici 4 RP730004 6 RP730006 8 RP730008 10 RP730010 12 RP730012 6-4 RP730604 8 -4 RP730804 8 -6 RP730806 10 - 6 RP731006 10 - 8 RP731008 12 - 8 RP731208 12 - 10 RP721210

RT 72

Push-in metalic "L" filet ext (Brass push-in "L" elbow) Cod Caracteristici 12 - 1/4 RT721412 12 - 3/8 RT723812 12 - 1/2 RT721212 14 - 3/8 RT723814 14 - 1/2 RT721214

RT 73

Racord push-in metalic "Y" (Brass push-in "Y") Cod Caracteristici 6 RT730006 8 RT730008 10 RT730010

RC 51

Racord push-on metalic drept ext (Brass push-on straight male thread) Cod Caracteristici 4 - 1/8 RC51K1804 5 - M5 RC51M505 5 - M6 RC51M605 5 - 1/8 RC51K1805 6 - M5 RC51M506 6 - M6 RC51M606 6 - M12x1,25 RC51M12506 6 - M12x1,5 RC51M12156 6 - 1/8 RC51K1806 6 - 1/4 RC51K1406 6 - 3/8 RC51K3806 8 - M12x1,25 RC51M12508 8 - M12x1,5 RC51M12158 8 - 1/8 RC51K1808 8 - 1/4 RC51K1408 8 - 3/8 RC51K3808 8 - 1/2 RC51K1208 10 - 1/8 RC51K1810 10 - 1/4 RC51K1410 10 - 3/8 RC51K3810 10 - 1/2 RC51K1210 12 - 3/8 RC51K1238 12 - 1/2 RC51K1212 15 - 1/2 RC51K1215

RC 52

Racord push-on metalic drept int (Brass push-on straight female thread) Cod Caracteristici 4/2,7 - 1/8 RC521804 5 - 1/8 RC521805 6 - 1/8 RC521806 6 - 1/4 RC521406 6 - 3/8 RC523806 8 - 1/8 RC521808 8 - 1/4 RC521408 8 - 3/8 RC523808 10 - 1/8 RC521810 10 - 1/4 RC521410 10 - 3/8 RC523810 10 - 1/2 RC521012 12 - 3/8 RC521238

Racord push-in polimer "Y" filet ext (Polimer push-in "Y" male threaded) Cod Caracteristici 4 - M5 RP74M504 4 - M6 RP74M604 4 - 1/8 RP741804 4 - 1/4 RP741404 6 - M5 RP74M506 6 - M6 RP74M606 6 - 1/8 RP741806 6 - 1/4 RP741406 6 - 3/8 RP743806 6 - 1/2 RP741206 8 - 1/8 RP741808 8 - 1/4 RP741408 8 - 3/8 RP743808 8 - 1/2 RP741208 10 - 1/8 RP741810 10 - 1/4 RP741410 10 - 3/8 RP743810 10 - 1/2 RP741210 12 - 1/8 RP741812 12 - 1/4 RP741412 12 - 3/8 RP743812 12 - 1/2 RP741212 Racord push-in polimer "L" ext (Polimer push-in "L" male) Cod Caracteristici 4 RP850004 6 RP850006 8 RP850008 10 RP850010 12 RP850012 6-4 RP850604 8 -6 RP850806 10 - 8 RP851008 12 - 10 RP851210 Racord push-in polimer cruce (Polimer push-in cross) Cod Caracteristici 4 RP880004 6 RP880006 8 RP880008 10 RP880010 12 RP880012 RC 53

RP 89

Racord push-in polimer "T" multiplu (Polimer push-in multi - "T" ) Cod Caracteristici 4-4 RP890404 6-6 RP890606 8-8 RP890808 10 -10 RP891010 6-4 RP890604 8-4 RP890804 8-6 RP890806 10 - 6 RP891006 10 - 8 RP891008

Made in

Racord push-on metalic drept (Brass push-on union) Cod Caracteristici 4 RC530004 5 RC530005 6 RC530006 8 RC530008 10 RC530010 12 RC530012 15 RC530015

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 14

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories RP 90

Racord push-in polimer "T" multi ext (Polimer push-in multi "T" thread ) Cod Caracteristici 4 - 1/8 RP901804 6 - 1/8 RP901806 6 - 1/4 RP901406 8 - 1/8 RP901808 8 - 1/4 RP901408 8 - 3/8 RP903808 10 - 1/4 RP901410 10 - 3/8 RP903810

RP 77

Racord push-in polimer "Y" multi ext (Polimer push-in multi "Y" thread ) Cod Caracteristici 4 - 1/8 RP771804 6 - 1/8 RP771806 6 - 1/4 RP771406 8 - 1/8 RP771808 8 - 1/4 RP771408 8 - 3/8 RP773808

RP 99

Cruce rotativa push-in polimer (Polymer push-in swivelling cross) Cod Caracteristici 4-4 RP990404 6-6 RP990606 8-8 RP990808 10 - 10 RP991010

RG 51

Racord compresiune drept ext (Brass compression straight male thread) Cod Caracteristici 4 - 1/8 RG51K1804 5 - 1/8 RG51K1805 6 - 1/8 RG51K1806 6 - 1/4 RG51K1406 8 - 1/8 RG51K1808 8 - 1/4 RG51K1408 8 - 3/8 RG51K3808 10 - 1/4 RG51K1410 10 - 3/8 RG51K3810 10 - 1/2 RG51K1210 12 - 3/8 RG51K3812 12 - 1/2 RG51K1212 14 - 1/2 RG51K1214 15 - 1/2 RG51K1215 16 - 1/2 RG51K1216 18 - 1/2 RG51K1218

RC 54

RC 55

RG 52

RG 53

Racord compresiune drept int (Brass compression straight F thread) Cod Caracteristici 4 - 1/8 RG52K1804 5 - 1/8 RG52K1805 6 - 1/8 RG52K1806 6 - 1/4 RG52K1406 8 - 1/8 RG52K1808 8 - 1/4 RG52K1408 8 - 3/8 RG52K3808 10 - 1/4 RG52K1410 10 - 3/8 RG52K3810 12 - 3/8 RG52K3812 12 - 1/2 RG52K1212 14 - 1/2 RG52K1214 15 - 1/2 RG52K1215 16 - 1/2 RG52K1216 18 - 1/2 RG52K1218 Racord compresiune metalic drept (Brass compression union) Cod Caracteristici 4 RG530004 5 RG530005 6 RG530006 8 RG530008 10 RG530010 12 RG530012 14 RG530014

Made in

Racord push-on metalic drept panou (Brass push-on union panel) Cod Caracteristici 4 RC540004 5 RC540005 6 RC540006 8 RC540008 10 RC540010 12 RC540012 15 RC540015 Push-on metalic "L" filet ext (Brass push-on "L" elbow) Cod Caracteristici 4 - M5x0,8 RC55M504 4 - M6x1 RC55M604 4 - 1/8 RC55K1804 5 - M5 RC55KM505 5 - 1/8 RC55K1805 6 - M5x0,8 RC55M506 6 - M12x1,25 RC55M12256 6 - M12x1,5 RC55M12506 6 - 1/8 RC55K1806 6 - 1/4 RC55K1406 6 - 3/8 RC55K3806 8 - M12X1,25 RC55M12258 8 - M12X1,5 RC55M12508 8 - 1/8 RC55K1808 8 - 1/4 RC55K1408 8 - 3/8 RC55K3808 10 - 1/8 RC55K1810 10 - 1/4 RC55K1410 10 - 3/8 RC55K3810 10 - 1/2 RC55K1210 10 - 3/8 RC55K3810 10 - 1/2 RC55K1210 12 -1/4 RC55K1412 12 - 3/8 RC55K3812 12 - 1/2 RC55K1212 15 - 1/2 RC55K1215

RC 55F

Push-on metalic "L" filet int (Brass push-on "L" elbow female ) Cod Caracteristici 5 - 1/8 RC55F1805 6 - 1/8 RC55F1806 6 - 1/4 RC55F1406 8 - 1/8 RC55F1808 8 - 1/4 RC55F1408 10 - 1/4 RC55F1410 12 - 3/8 RC55F3812

RC 56

Racord push-on metalic "L" (Brass push-on "L") Cod Caracteristici 4 RC560004 5 RC560005 6 RC560006 8 RC560008 10 RC560010 12 RC560012 15 RC560015

RC 57

Push-on metalic "T" filet ext (Brass push-on "T") Cod Caracteristici 4 - 1/8 RC57K1804 5 - M5x1 RC57M505 5 - 1/8 RC57K1805 6 - 1/8 RC57K1806 6 - 1/4 RC57K1406 6 - 3/8 RC57K3806 8 - 1/8 RC57K1808 8 - 1/4 RC57K1408 8 - 3/8 RC57K3808 10 - 1/8 RC57K1810 10 - 1/4 RC57K1410 10 - 3/8 RC57K3810

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 15

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories RG 53

Racord compresiune metalic drept (Brass compression union) Cod Caracteristici 15 RG530015 16 RG530016 18 RG530018

RG 54

Racord compresiune metalic panou (Brass compression union panel) Cod Caracteristici 4 RG540004 5 RG540005 6 RG540006 8 RG540008 10 RG540010 12 RG540012 14 RG540014 15 RG540015

RG 55K

RG 56

RG 57

RG 58

Racord compresiune "L" filet ext (Brass compression "L" elbow) Cod Caracteristici 4 - 1/8 RG55K1804 5 - 1/8 RG55K1805 6 - 1/8 RG55K1806 6 - 1/4 RG55K1406 8 - 1/8 RG55K1808 8 - 1/4 RG55K1408 8 - 3/8 RG55K3808 10 - 1/4 RG55K1410 10 - 3/8 RG55K3810 10 - 1/2 RG55K1210 12 - 3/8 RG55K3812 12 - 1/2 RG55K1212 14 - 1/2 RG55K1214 15 - 1/2 RG55K1215 16 - 1/2 RG55K1216 18 - 1/2 RG55K1218 Racord compresiune metalic "L" (Brass compression "L") Cod Caracteristici 4 RG560004 5 RG560005 6 RG560006 8 RG560008 10 RG560010 12 RG560012 14 RG560014 15 RG560015 16 RG560016 18 RG560018 Racord compresiune "T" ext central (Brass compression "T") Cod Caracteristici 4 - 1/8 RG57K1804 5 - 1/8 RG57K1805 6 - 1/8 RG57K1806 6 - 1/4 RG57K1406 8 - 1/8 RG57K1808 8 - 1/4 RG57K1408 8 - 3/8 RG57K3808 10 - 1/4 RG57K1410 10 - 3/8 RG57K3810 10 - 1/2 RG57K1210 12 - 3/8 RG57K3812 12 - 1/2 RG57K1212 15 - 1/2 RG57K1215 16 - 1/2 RG57K1216 18 - 1/2 RG57K1218 Racord compresiune "T" ext lateral (Brass compression "T" lateral) Cod Caracteristici 4 - 1/8 RG58K1804 5 - 1/8 RG58K1805 6 - 1/8 RG58K1806 6 - 1/4 RG58K1406

Made in

RC 57

Push-on metalic "T" filet ext (Brass push-on "T") Cod Caracteristici 10 - 1/2 RC57K1210 12 - 3/8 RC57K3812 12 - 1/2 RC57K1212 15 - 1/2 RC57K1215

RC 58

Push-on metalic "T" filet ext lateral (Brass push-on "T" lateral) Cod Caracteristici 4 - 1/8 RC58K1804 5 - M5x1 RC58M505 5 - 1/8 RC58K1805 6 - 1/8 RC58K1806 6 - 1/4 RC58K1406 6 - 3/8 RC58K3806 8 - 1/8 RC58K1808 8 - 1/4 RC58K1408 8 - 3/8 RC58K3808 10 - 1/8 RC58K1810 10 - 1/4 RC58K1410 10 - 3/8 RC58K3810 10 - 1/2 RC58K1210 12 - 3/8 RC58K3812 12 - 1/2 RC58K1212 15 - 1/2 RC58K1215

RC 59

Racord push-on metalic "T" (Brass push-on "T") Cod Caracteristici 4 RC590004 5 RC590005 6 RC590006 8 RC590008 10 RC590010 12 RC590012 15 RC590015

RC 60

Piulita push-on metalica (Brass push-on locking nut) Cod Caracteristici 4 RC600004 5 RC600005 6 M8 RC600806 6 M10 RC601006 8 RC600008 10 RC600010 12 RC600012 15 RC600015

RC 61

Racord push-on metalic cruce (Brass push-on cross) Cod Caracteristici 6 RC610006 8 RC610008 10 RC610010

RC 62 Cod RC6200M5 RC620018 RC620014 RC620038 RC620012 RC620034 RC620001 RG 70

Piulita metalica ( Nut) Caracteristici M5 1/8 1/4 3/8 1/2 3/4 1

Piulita compresiune metalica teava (Compression nut for copper pipe) Cod Caracteristici 3/8 - 10 RG703810 3/8 - 12 RG703812 1/2 - 10 RG701212 1/2 - 14 RG701214 1/2 - 16 RG701216 3/4 - 16 RG703416 3/4 - 18 RG703418

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 16

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories RG 58

RG 59

RG 60

Racord compresiune "T" ext lateral (Brass compression "T" lateral) Cod Caracteristici 8 - 1/8 RG58K1808 6 - 1/4 RG58K1406 8 - 1/8 RG58K1808 8 - 1/4 RG58K1408 8 - 3/8 RG58K3808 10 - 1/4 RG58K1410 10 - 3/8 RG58K3810 10 - 1/2 RG58K1210 12 - 3/8 RG58K3812 12 - 1/2 RG58K1212 15 - 1/2 RG58K1215 16 - 1/2 RG58K1216 18 - 1/2 RG58K1218 Racord compresiune metalic "T" (Brass compression "T") Cod Caracteristici 4 RG590004 5 RG590005 6 RG590006 8 RG590008 10 RG590010 12 RG590012 14 RG590014 15 RG590015 16 RG590016 18 RG590018 Piulita compresiune metalica (Brass compression nut) Cod Caracteristici 4 RG600004 5 RG600005 6 RG600006 8 RG600008 10 RG600010 12 RG600012 14 RG600014 15 RG600015 16 RG600016 18 RG600018

RG 61 Cod RG610004 RG610005 RG610006 RG610008 RG610010 RG610012 RG610014 RG610015 RG610016 RG610018 RG 62

Bucsa elastica compresiune (Brass ogive) Caracteristici 4 5 6 8 10 12 14 15 16 18

Suport intern tub pneumatic (Internal suport) Cod Caracteristici 2,5 RG620025 4 RG620004 6 RG620006 8 RG620008 10 RG620010 12 RG620012 14 RG620014 15 RG620015

RG 63 Cod RG631804 RG631805 RG631806 RG631406 RG631808

Tija calibrata filet ext(Stem adaptor) Caracteristici 4 - 1/8 5 - 1/8 6 - 1/8 6 - 1/4 8 - 1/8

Made in

RG 72

Niplu compresiune teava (Compression nipple for copper pipe) Cod Caracteristici 3/8 - 3/8 RG723838 1/2 - 1/2 RG721212 3/4 - 3/4 RG723434

RG 75K

Racord compresiune "L" teava (Compression "L" for copper pipe) Cod Caracteristici 3/8 - 3/8 RG75K3838 1/2 - 1/2 RG75K1212

SZ 58 noise: 72 - 90 dB

Amortizor plastic plasa inox (Polymer silencers stainless wired ) Cod Caracteristici 1/8 SZ580018 1/4 SZ580014 3/8 SZ580038 1/2 SZ580012

SZ 59 noise: 72 - 90 dB

Amortizor nichelat plasa inox (Nichel plated silencers stainless wired ) Cod Caracteristici 1/8 SZ590018 1/4 SZ590014 3/8 SZ590038 1/2 SZ590012

SZ 60 noise: 72 - 88 dB

Amortizor bronz plasa inox (Brass silencers stainless wired ) Cod Caracteristici M5 SZ6000M5 1/8 SZ600018 1/4 SZ600014 3/8 SZ600038 1/2 SZ600012 3/4 SZ600034 1 SZ600001

SZ 61 noise: 73 - 90 dB

Amortizor bronz sinterizat scurt (Short brass sinterized silencers ) Cod Caracteristici M5 SZ6100M5 1/8 SZ610018 1/4 SZ610014 3/8 SZ610038 1/2 SZ610012 3/4 SZ610034 1 SZ610001

SZ 62 noise: 78 - 95 dB

Amortizor bronz sinterizat con (Cone-shaped brass sinterized silencers ) Cod Caracteristici M5 SZ6200M5 1/8 SZ620018 1/4 SZ620014 3/8 SZ620038 1/2 SZ620012 3/4 SZ620034 1 SZ620001

SZ 63 noise: 78 - 95 dB

Amortizor bronz sinterizat con (Cone-shaped brass sinterized silencers ) Cod Caracteristici 1/8 SZ630018 1/4 SZ630014 3/8 SZ630038 1/2 SZ630012 3/4 SZ630034 1 SZ630001

SZ 63 noise: 79 - 95 dB

Amortizor bronz sinterizat con (Cone-shaped brass sinterized silencers ) Cod Caracteristici 1/8 SZ640018 1/4 SZ640014 3/8 SZ640038 1/2 SZ640012 3/4 SZ640034 1 SZ640001

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 17

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories Cod RG631408 RG631410 RG633810 RG633812 RG631212

Tija calibrata filet ext(Stem adaptor) Caracteristici 8 - 1/4 10 - 1/4 10 - 3/8 12 - 3/8 12 - 1/2

Cod RG540806 RG541006 RG541008 RG541208

Racord compresiune reductie (Adaptor) Caracteristici 8-6 10 - 6 10 - 8 12 - 8

RG 63

RG 64

10.057.4 2 - 10 bar

Indicator presiune (Air presence spy without protection) Cod Caracteristici RED G1/4 10.057.4 YELLOW G1/4 10.057.4/G GREEN G1/4 10.057.4/V BLUE G1/4 10.057.4/B

10.060.4 2 - 10 bar

Indicator presiune (Air presence spy with protection) Cod Caracteristici RED G1/4 10.060.4 YELLOW G1/4 10.060.4/G GREEN G1/4 10.060.4/V BLUE G1/4 10.060.4/B

10.058.4 2 - 10 bar

Indicator presiune (Air presence spy for panel mounting) Cod Caracteristici RED G1/4 10.058.4 YELLOW G1/4 10.058.4/G GREEN G1/4 10.058.4/V BLUE G1/4 10.058.4/B

Amortizor debit marit dublu Vuototecnica (High Flow Air Mufflers ALU) 2SSX noise red.: -20 dB Cod Caracteristici 1/4 2SSX 1/4" 3/8 2SSX 3/8" 1/2 2SSX 1/2" 3/4 2SSX 3/4" 1 2SSX 1" SSX noise red.: -13 dB

Amortizor debit marit Vuototecnica (High Flow Air Mufflers ALU) Cod Caracteristici 1/4 SSX 1/4" 3/8 SSX 3/8" 1/2 SSX 1/2" 3/4 SSX 3/4" R 3/4 SSX 3/4" 1 SSX 1" 1" 1/2 SSX 1" 1/2 2 SSX 2"

SZ 66 noise: 78 - 95 dB

Amortizor bronz flux reglabil (Exhaust regulators) Cod Caracteristici 1/8 SZ660018 1/4 SZ660014 3/8 SZ660038 1/2 SZ660012 3/4 SZ660034 1 SZ660001

SZ 67 noise: 72 - 89 dB

Amortizor bronz ingropat (Spherical pastille sinterized silencers) Cod Caracteristici 1/8 SZ670018 1/4 SZ670014 3/8 SZ670038 1/2 SZ670012 3/4 SZ670034 1 SZ670001

SZ 68 noise: 84 - 91 dB

Amortizor plastic dinamic bile (Plastic dinamic with balls silencers) Cod Caracteristici 1/8 SZ680018 1/4 SZ680014 3/8 SZ680038 1/2 SZ680012 3/4 SZ680034 1 SZ680001

SZ 69 noise: 87 - 92 dB

Amortizor plastic static plasa metalica (Static plastic silencers) Cod Caracteristici 1/8 SZ690018 1/4 SZ690014 3/8 SZ690038 1/2 SZ690012

Amortizor bronz sinterizat cilindric (Cilindrical brass sinterized silencers ) SZ 73 noise: 78 - 95 dB Cod Caracteristici M5 SZ7300M5 1/8 SZ730018 1/4 SZ730014 3/8 SZ730038 1/2 SZ730012 3/4 SZ730034 1 SZ730001 SZ 74 noise: 72 - 89 dB

SEHP

-40°C + 145°C 0 - 40 bar 85% noise red.

94% Flow Factor MB -20°C + 100°C 0 - 14 bar

Amortizor debit marit silentios (High Flow Air Mufflers) Cod Caracteristici 3/4 SE75HP 1 SE100HP 1" 1/4 SE125HP 1" 1/2 SE150HP 2 SE200HP 3 SE300HP Amortizor otel zincat cilindric (Cilindrical zinc plated steel silencers ) Cod Caracteristici 1/8 M1MB 1/4 M2MB 3/8 M3MB 1/2 M4MB 3/4 M5MB 1 M6MB

Made in

Amortizor bronz sinterizat cilindric (Cilindrical brass sinterized silencers ) SZ 65 noise: 78 - 95 dB Cod Caracteristici M5 SZ6500M5MA 1/8 SZ650018 1/4 SZ650014 3/8 SZ650038 1/2 SZ650012 3/4 SZ650034 1 SZ650001

SZ 75 noise red.: -25 dB

Amortizor bronz sinterizat scurt (Cilindrical brass sinterized silencers ) Cod Caracteristici 1/8 SZ740018 1/4 SZ740014 3/8 SZ740038 1/2 SZ740012 3/4 SZ740034 1 SZ740001 Amortizor plastic poros (Polyethylene silencers) Cod Caracteristici M5 SZ7500M5 1/8 SZ750018 1/4 SZ750014 3/8 SZ750038 1/2 SZ750012 3/4 SZ750034 1 SZ750001

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 18

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

Accesorii pneumatice - Pneumatic accessories SEHB

-40°C + 145°C 0 - 10 bar 85% noise red.

94% Flow Factor

FR76 4/4

Amortizor debit marit silentios (High Flow Air Mufflers) Cod Caracteristici 1/4 SE25HB 3/8 SE37HB 1/2 SE50HB 3/4 SE75HB 1 SE100HB 1" 1/4 SE125HB 1" 1/2 SE150HB 2 SE200HB 3 SE300HB 4 SE400HB 6 SE600HB Unitate de preparare aer (Air preparation) Cod Filet Temperatura Presiune Elem.filtrare Greutate

FR75 1/4

Cod Filet Temperatura Presiune Elem.filtrare Greutate

Cod Filet Temperatura Presiune Elem.filtrare Greutate

Cod Filet Temperatura Presiune Greutate

Cod Filet Temperatura Presiune Greutate FR83 1/4

Cod Filet Temperatura Presiune Greutate

Cod Filet Temperatura Presiune Elem.filtrare Greutate

Cod Filet Temperatura Presiune Elem.filtrare Greutate

FR732012 1/2 -5 …+60 °C 20 bar 40μm 480 gr Regulator aer R 1/2 (Air regulator)

FR72 1/2 Cod Filet Temperatura Presiune Greutate

FR7208R12 1/2 -5 …+60 °C 20 bar 450 gr Lubrificator aer R 1/2 (Air lubricator)

FR74 1/2 Cod Filet Temperatura Presiune Greutate

FR740012 1/2 -5 …+60 °C 20 bar 545 gr

Regulator + cuplaj rapid (Air lubricator + quick coupling ) Cod Filet Temperatura Presiune Greutate

PT04/PT05

FR752008R12 1/2 -5 …+60 °C 20 bar 40μm 800 gr Filtru aer 1/2 (Air filter)

FR73 1/2

FR86 3/8

FR762008R12 1/2 -5 …+60 °C 20 bar 40μm 1518 gr

Unitate de preparare aer (Air preparation)

FR75 1/2

FR830014 1/4 -5 …+60 °C 12 bar 250 gr

Presostat cu protectie termica(Switch with thermal protection) Cod Caracteristici PT040002 monofazic PT050004 Trif. 4-6,3 A PT050006 Trif. 6,3-10 A PT050008 Trif. 10-16 A PT050010 Trif.13-18A Atentie !!! Toate presostatele sunt cu 4 cai PT04/PT05

Cod Filet Temperatura Presiune Elem.filtrare Greutate

FR740014 1/4 -5 …+60 °C 12 bar 150 gr

Regulator + cuplaj rapid (Air lubricator + quick coupling )

Unitate de preparare aer (Air preparation)

FR76 1/2

FR7208R14 1/4 -5 …+60 °C 12 bar 190 gr Lubrificator aer R 1/4 (Air lubricator)

FR74 1/4

Amortizor purjare (grad filtrare 99,99%) (Exhaust silencer filter) Cod Caracteristici 1/2 34600213 3/4 34600214 1 34600215 1" 1/4 34600216

FR732014 1/4 -5 …+60 °C 12 bar 40μm 215 gr Regulator aer R 1/4 (Air regulator)

FR72 1/4

346 -5°C + 50°C 0 - 16 bar >0,3 µm noise red.: >40 dB

FR752008R14 1/4 -5 …+60 °C 12 bar 40μm 326 gr Filtru aer 1/4 (Air filter)

FR73 1/4

SZ 76

FR762008R14 1/4 -5 …+60 °C 12 bar 40μm 580 gr

Unitate de preparare aer (Air preparation)

Made in

Amortizor bronz flux reglabil (Exhaust regulators) Cod Caracteristici M5 SZ7600M5 1/8 SZ760018 1/4 SZ760014 3/8 SZ760038

FR860038 3/8 -5 …+60 °C 12 bar 445 gr

Presostat fara protectie termica(Switch without thermal protection) Cod PT010002 PT020002

Caracteristici monofazic Trifazic

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 19

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation MN65/MN70 Cod MN656314012R MN656314016R MX706314016R MX706314025R MX706314100R MX706314315R MX706314600R MN65/MN70 Cod MN654018012R MN654018016R

Manometru D63 radial 1/4 Caracteristici 0-12 bar 0-16 bar Glicerina 0-16 Glicerina 0-25 Glicerina 0-100 Glicerina 0-315 Glicerina 0-600

MN60/MN71

Manometru D40 radial 1/8

MN60

Caracteristici 0-12 bar 0-16 bar Manometru D 100 radial 1/2 Caracteristici 0-25 bar

Cod Presiune Diametru Presiune

PA160001 0-12 bar D 63 12 bar

Manometru D63 posterior 1/4 Caracteristici 0 - 12 bar 0 - 16 bar Glicerina 0-16 Glicerina 0-25 Glicerina 0-100 Glicerina 0-315 Glicerina 0-600

Cod MN604018099P MN604018004P MN604018006P MN604018012P MN604018016P

Manometru D40 posterior 1/8 Caracteristici Vacum -1 la 0 0 - 4 bar 0 - 6 bar 0 - 12 bar 0 - 16 bar

Pistol de umflat roti cu manometru omologat

PA21 Cod Presiune Diametru

Pistol de umflat roti cu manometru

PA16

Cod MN606314012P MN606314016P MX716314016P MX716314025P MX716314100P MX716314315P MX716314600P

PA210001 0-10 bar D 63 Pistol de umflat roti cu manometru omologat

PA21 Cod Presiune Diametru

PA130002 0-10 bar D 80

Pistol de umflat roti cu manometru

PA17

Diuza anvelope

PA17 Cod Presiune Diametru

PA170001 0-12 bar D 80

Cod

PA170001

Diuza anvelope cu filet respectiv stut 8

PA17

Pistol de vopsit cu rezervorul sus mini

PA08 Cod

PA170001 Cod Rez. Consum Presiune Diuza

Pistol de vopsit cu rezervorul sus HVLP

PA14 Cod Rez. Consum Presiune Diuza

PA14HVLP 600 cc 200-400 l/min 4-6 bar 1,4

Cod Rez. Consum Presiune Diuza

PA300001 500 cc 200-400 l/min 4-8 bar 1,5

Cod Rez. Consum Presiune Diuza

Cod Rez. Consum Presiune Diuza

PA340001 500 cc 150-250 l/min 4-8 bar 1,5

PA310001 1000 cc 200-400 l/min 4-8 bar 1,5 Pistol de vopsit Profi master 3000

PA33 Cod Rez. Consum Presiune Diuza

Pistol de vopsit Profi master 3100

PA34

Pistol de vopsit cu rezervorul jos

PA31

Pistol de vopsit cu rezervorul sus

PA30

PA08MINI 120 cc 200-400 l/min 4-6 bar 0,8

PA330001 1000 cc 150-250 l/min 4-8 bar 1,5 Diuza pistol de vopsit Profi

PA35 Cod Diuza

PA350001 De la 1,2 la 2,5

Diuza pistol de vopsit

PA32

Pistol de suflat aer tija lunga

PA14 Cod Diuza

PA320001 De la 1,2 la 3

Pistol de suflat aer tija scurta

PA13 Cod

PA130001

Cod

PA140001

Pistol de suflat aer progresiv

PA11 Cod

PA110001

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 20

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation Pistol de sablat

6500.01

6500.01 200-400 l/min 6-8 bar 1000 cc

Cod Consum Presiune Rez.

Set vopsitor 5 piese

PA10 Cod

Pistol de antifonat cu rezervor

PA24 Pistol de spalat

PA22 Cod

Cod Presiune Consum

PA220001

PA240001 6 - 8 bar 200 - 400 l/min Pistol de antifonat fara rezervor

PA24 Pistol de antifonat fara rezervor

PA26

Regulator de presiune de dimensiuni mici

FR14

Cod Presiune Consum

PA260001 6 - 8 bar 200 - 400 l/min

Cod Presiune Consum

Cod Filet Temperatura Presiune Greutate

RV43 Cod RV431818 RV431414 RV433838 RV431212

FR1456012 1/4 -5 …+60 °C 0-10 bar 80 gr

Cod RV410018 RV410014 RV410038 RV410012

Cod RV450018 RV450014 RV450038 RV450012

Minirobinet hexagonal f int Caracteristici 1/8 - 1/8 1/4 - 1/4 3/8 - 3/8 1/2 - 1/2

RV46 Cod RV460018V RV460014V RV460038V RV460012V

Supapa unisens Caracteristici 1/8 - 1/8 1/4 - 1/4 3/8 - 3/8 1/2 - 1/2

Electrovalva 2/2 NC pentru aer si apa ( -10.....+85 °C ) Cod Caracteristici SCE238A001 3/8 0,3-10 bar SCE238A002 1/2 0,3-10 bar SCE238A004 3/4 0,3-10 bar SCE238A005 1'' 0,3-10 bar SCE238A016 5/4 0,5-10 bar SCE238A017 6/4 0,5-10bar SCE238A018 2'' 0,5-10 bar SCE238A006 3/8 0,3-16 bar SCE238A007 1/2 0,3-16 bar SCE238A008 1/2 0,3-16 bar SCE238A009 3/4 0,3-16 bar SCE238A010 1'' 0,3-16 bar

PA Cod PA2x4 PA4x6 PA6x8 PA8x10 PA10x12 PA12x14 PA14x16

Furtun rilsan( -60…. +130°C) Caracteristici 2x4 - 47 bar 4x6 - 28 bar 6x8 - 20 bar 8x10 - 16 bar 10x12 - 13 bar 12x14 - 11 bar 14x16 - 9 bar

SCG23/SCE21

Cod RV421818 RV421418 RV421414 RV423814 RV423838 RV421212

Minirobinet f int + ext Caracteristici 1/8 - 1/8 1/4 - 1/8 1/4 - 1/4 3/8 - 1/4 3/8 - 3/8 1/2 - 1/2

Electrovalva 2/2 NC pentru aer si apa ( -20.....+85 °C ) Cod Caracteristici 3/8 0-10 bar DN 12.5 SCG238A044 1/2 0-10 bar DN 12.5 SCG238A046 1/2 0-10 bar DN 19 SCG238A047 3/4 0-10 bar DN 19 SCG238A048 1'' 0-10 bar DN 25 SCG238A050 Normal deschisa SCE210C034 3/8 0-9 bar DN 15 SCE210C035 1/2 0-9 bar DN 20 SCE210C057 1'' 0-9 bar DN 25

Cod PU2x4 PU4x6 PU6x8 PU8x10 PU9x12 PU10x12

Furtun elastolan( -40…. +100°C) Caracteristici 2x4 - 22 bar 4x6 - 19 bar 6x8 - 16 bar 8x10 - 12 bar 9x12 - 16 bar 10x12 - 9 bar

Cod CRT6X12 CRT8X14 CRT10X16 CRT13X19 CRT19X26

Furtun PVC cu insertie textila( -40…. +60°C) Caracteristici 6x12 - 16 bar 8x14 - 15 bar 10x16 - 14 bar 13x19 - 11 bar 19x26 - 11 bar

PU

CRT

GMMA

Minirobinet Caracteristici 1/8 - 1/8 1/4 - 1/4 3/8 - 3/8 1/2 - 1/2 Minirobinet hexagonal f int + ext Caracteristici 1/8 - 1/8 1/4 - 1/4 3/8 - 3/8 1/2 - 1/2

RV42 RV45

PA240001 6 - 8 bar 200 - 400 l/min

Cod RV440018 RV440014 RV440038 RV440012

RV44 Robinet culisant Caracteristici 1/8 - 1/8 1/4 - 1/4 3/8 - 3/8 1/2 - 1/2

RV41

SCE23

PA100001

Furtun cauciuc cu insertie textila 20 bari( -30…. +80°C) Cod Caracteristici 8x17 GMMA0817 10x19 GMMA1019 13x23 GMMA1323

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 21

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation PTFE Cod PTFE2x4 PTFE4x6 PTFE6x8 PTFE8x10 PTFE10x12 PTFE12x14

SR8x10

Tub PTFE( -60…. +260°C),rezistenta chimica Caracteristici 2x4 - 33 bar 4x6 - 18 bar 6x8 - 14 bar 8x10 - 12 bar 10x12 - 10 bar 12x14 - 8 bar

Furtun spiralat PA 8x10(-60…+130°C), 20 bar+2 cuple rapide Cod Caracteristici 5 SR8x10x5-RX2 10 SR8x10x10-RX2 15 SR8x10x15-RX2 20 SR8x10x20-RX2 25 SR8x10x25-RX2 30 SR8x10x30-RX2 30(fara cuple) SR8x10x30-R

TPVCMM Cod TPVCMM25 TPVCMM32 TPVCMM40 TPVCMM50 SPU4x6

SPU6.5x10

SR6x8

TS Cod TS3x5 TS4x7 TS6x10 TS8x12

SE Cod SE5.5x8x5 SE5.5x8x7.5 SE5.5x8x10 SE5.5x8x12.5 SE6.5x10x10

Tub vacuum magnum metal Caracteristici 25 32 40 50

Cod PG120008 PG120010 PG120012 PG120015

Colier cauciucat W1 latime 12 gaura 5.3 Caracteristici Diam 8 Diam 10 Diam 12 Diam 15

Cod PG200010 PG200016 PG200020 PG200045 PG200050

Colier cauciucat W1 latime 20 gaura 8.4 Caracteristici Diam 10 Diam 16 Diam 20 Diam 45 Diam 50

Cod FA090711 FA090816 FA091017 FA091220 FA091525 FA091624 FA091627 FA091928 FA092032 FA092545 FA093250 FA094060 FA095070 FA096080 FA097090

Colier metalic latime 9 mm W2 AISI430 Caracteristici Diam 7- 11 Diam 8 - 16 Diam 10 - 17 Diam 12 -20 Diam 15 - 25 Diam 16 - 24 Diam 16 - 27 Diam 19 - 28 Diam 20 -32 Diam 25 -45 Diam 32 -50 Diam 40 -60 Diam 50 -70 Diam 60 -80 Diam 70 -90

PG12

PG20

FA09

Tub siliconic Caracteristici 3x5 4x7 6x10 8x12

Tub elastolan 1190,-40…+60°C Caracteristici 5.5x8x5 5.5x8x7.5 5.5x8x10 5.5x8x12.5 6.5x10x10

SPU5.5x8

Furtun spiralat PU 5.5x8(-40…+60°C), 12 bar+2 cuple rapide Cod Caracteristici 2.5 m SPU5.5x8x2.5CC 5m SPU5.5x8x5CC 7.5 m SPU5.5x8x7.5CC 10 m SPU5.5x8x10CC 12.5 m SPU5.5x8x12.5CC

SPU8x12

Furtun spiralat PU 6.5x10(-40…+60°C), 13 bar+2 cuple rapide Cod Caracteristici 2.5 m SPU8x12x2.5CC 5m SPU8x12x5CC 7.5 m SPU8x12x7.5CC 10 m SPU8x12x10CC 12.5 m SPU8x12x12.5CC

Furtun spiralat PU 4x6(-40…+60°C), 13 bar+2 cuple rapide Cod Caracteristici 2m SPU4x6x2CC 4m SPU4x6x4CC Furtun spiralat PU 6.5x10(-40…+60°C), 14 bar+2 cuple rapide Cod Caracteristici 2.5 m SPU6.5x10x2.5CC 5m SPU6.5x10x5CC 7.5 m SPU6.5x10x7.5CC 10 m SPU6.5x10x10CC 12.5 m SPU6.5x10x12.5CC

Furtun spiralat PA 6x8(-60…+130°C), 20 bar+2 cuple rapide Cod Caracteristici 5 SR6x8x5-RX2 10 SR6x8x10-RX2 15 SR6x8x15-RX2 20 SR6x8x20-RX2 25 SR6x8x25-RX2 30 SR6x8x30-RX2 30(fara cuple) SR6x8x30-R

Cod PG150010 PG150015 PG150016 PG150020 PG150030

Colier cauciucat W1 latime 15 gaura 6.4 Caracteristici Diam 10 Diam 15 Diam 16 Diam 20 Diam 30

Cod FP0709 FP0911 FP1113 FP1315 FP1518 FP1821

Coliere metalice Caracteristici Diam 7 - 9 Diam 9 -11 Diam 11 - 13 Diam 13 -15 Diam 15 -18 Diam 18 -21

Cod FA121525 FA121928 FA122032 FA122545 FA123250 FA124060 FA125070 FA126080 FA127090 FA128010 FA129011 FA121012 FA121113 FA121214 FA121315

Colier metalic latime 12 mm W2 AISI430 Caracteristici Diam 15 - 25 Diam 19 - 28 Diam 20 - 32 Diam 25 -45 Diam 32 - 50 Diam 40 - 60 Diam 50 - 70 Diam 60 - 80 Diam 70 -90 Diam 80 -100 Diam 90 -110 Diam 100 -120 Diam 110 -130 Diam 120 -140 Diam 130 -150

PG15

FP

FA12

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 22

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation Banda teflon Caracteristici 12mmx12mx0.1

PTFE12 Cod PTFE1212010

Cod RL5000M5 RL500018 RL500014 RL500038 RL500012

Distribuitor aer (Distribution manifolds) Caracteristici M5 1/8 1/4 3/8 1/2

Cod RL5218M533 RL52141833 RL52381833 RL52381433 RL52121433 RL52123833 RL52121233 RL5218M544 RL52141844 RL52381844 RL52381444 RL52121444 RL52123844 RL52121244 RL5218M555 RL52141855 RL52381855 RL52381455 RL52121455 RL52123855 RL52121255

Distribuitor aer (Distribution manifolds) Caracteristici 2XG1/8 - 6xM5 2xG1/4 - 6xG1/8 2xG3/8 - 6xG1/8 2xG3/8 - 6xG1/4 2xG1/2 - 6xG1/4 2xG1/2 - 6xG3/8 2xG1/2 - 6xG1/2 2XG1/8 - 8xM5 2xG1/4 - 8xG1/8 2xG3/8 - 8xG1/8 2xG3/8 - 8xG1/4 2xG1/2 - 8xG1/4 2xG1/2 - 8xG3/8 2xG1/2 - 8xG1/2 2XG1/8 - 10xM5 2xG1/4 - 10xG1/8 2xG3/8 - 10xG1/8 2xG3/8 - 10xG1/4 2xG1/2 - 10xG1/4 2xG1/2 - 10xG3/8 2xG1/2 - 10xG1/2

RL 50

RL 52

Cod FA121416 FA121618

Colier metalic latime 12 mm W2 AISI430 Caracteristici Diam 140 -160 Diam 160 -180

Cod RL5118M502 RL5118M503 RL5118M504 RL5118M505 RL5118M506 RL51141802 RL51141803 RL51141804 RL51141805 RL51141806 RL51381402 RL51381403 RL51381404 RL51381405 RL51381406 RL51121202 RL51121203 RL51121204 RL51121205 RL51121206

Distribuitor aer (Distribution manifolds) Caracteristici 2XG1/8 - 2XM5 2XG1/8 - 3XM5 2XG1/8 - 4XM5 2XG1/8 - 5XM5 2XG1/8 - 6XM5 2XG1/4 - 2XG1/8 2XG1/4 - 3XG1/8 2XG1/4 - 4XG1/8 2XG1/4 - 5XG1/8 2XG1/4 - 6XG1/8 2XG3/8 - 2XG1/4 2XG3/8 - 3XG1/4 2XG3/8 - 4XG1/4 2XG3/8 - 5XG1/4 2XG3/8 - 6XG1/4 2XG1/2 - 2XG3/8 2XG1/2 - 3XG3/8 2XG1/2 - 4XG3/8 2XG1/2 - 5XG3/8 2XG1/2 - 6XG3/8

FA12

RL 51

Valve Cod SS1/CD SS1/CD-R SS1/E SS1/E-RC

Cod SSP1/CD SSP1/CD-R SSP1/E SSP1/E-RC

Actuatori cu buton selector scurt, negru Caracteristici 0 1 0→1 2 0 1 2→0←1

Actuatori cu buton selector lung, negru Caracteristici 0 1 0→1 2 0 1 2→0←1

Actuatori cu buton ø60 Cod PFBA2 PFB2/60

Cod SSC/CD-V SSC/CD-Z SSC/E-V

Caracteristici Multidirectional,rosu Deblocare rasucire,rosu

Actuatori cu buton selector cu cheie Poz de scos cheia,functia central,0 1 ambele pozitii,0 1 central,2 0 1

Made in

Cod 305 LL 03.024.4 03.044.4

Microvalve cu porturi filet M5 3/2,NC Caracteristici lever bistabil,port evacuare fara filet corp valva lung,lever bistab,evac fara filet lever bistabil,evacuare M5

Cod 08.306.4 08.209.4

Microvalve cu maner Caracteristici 1x3/2 NC 2x3/2 NC

Cod PR1/NRB DCV1 DCG1 DCA1 DCB1 DCN1 DCR1

Actuatori pentru montaj pe panou Caracteristici buton push protejat Verde Galben Albastru deschis Alb Rosu Negru

Cod PF2/40 PF1/40 PFB2/40

Actuatori cu buton ciuperca ø40 Caracteristici Axial monostabil,rosu Axial monostabil,negru Deblocare rasucire,rosu

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 23

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation Valve actionate mecanic 1/8" Caracteristici 3/2,buton,rev arc 5/2,buton,rev arc 3/2,NC,filament servopilot,rev arc 3/2,NO,filament servopilot,rev arc 5/2,filament servopilot,rev arc 3/2,roller lever,rev arc 5/2,roller lever,rev arc 3/2,parghie unidir,rev arc 5/2,parghie unidir,rev arc

Cod 321 MP 521 MP 321 MN 321 MNA 521 MN 321 MR 521 MR 321 MRU 521 MRU

Cod PED 502 M PED 502 B PED 502 S PED 502 BS

Pedale 5/2,1/4", cu capac protectie Caracteristici monostabil bistabil monostabil,sig bistabil,sig

Cod PEDS 502 M PEDS 502 B PEDS 502 S PEDS 502 BS

Pedale 5/2,1/4",fara capac protectie Caracteristici monostabil bistabil monostabil,sig bistabil,sig

PED 502

PEDS 502

PED

Cod 321 MB 521 MB 321 ML90 322 ML90 321 LL90 322 LL90 521 ML90 522 ML90 521 LL90 522 LL90 5213C LL90 5223C LL90 5213A LL90 5223A LL90 5213P LL90 5223P LL90 5213C ML90 5223C ML90 5213A ML90 5223A ML90 5213P ML90 5223P ML90 321 LL 322 LL 521 LL 522 LL 5213A ML 5213A LL 10.071.4 10.072.4 10.069.4 10.070.4

Pedale contact electric NC-NO,cu capac protectie Cod Caracteristici Monostabil PED EM Bistabil PED EB Monostabil,sig PED ES Bistabil,sig PED EBS

Cod 321 ME 322 ME 321 MEA 322 MEA 521 ME 522 ME

Valve actionate de bobine,pilot bobina Caracteristici 3/2,1/8,NC,rev arc 3/2,1/4,NC,rev arc 3/2,1/8,NO,rev arc 3/1,1/4,NO,rev arc 5/2,1/8,rev arc 5/2,1/4,rev arc

Cod 321 ME MIC 01 322 ME MIC 01 321 EE MIC 01 322 EE MIC 01 521 ME MIC 01 522 ME MIC 01 521 EE MIC 01 522 EE MIC 01 5213C EE MIC 01 5213A EE MIC 01 5213P EE MIC 01 5223C EE MIC 01 5223A EE MIC 01 5223P EE MIC 01

Cod 152 MC 152 CC 152 ME 152 EE 152 ME AS 152 EE AS 153C CC 153A CC 153P CC 153C EE 153A EE 153P EE

Cod 321 EE 322 EE 521 EE 522 EE 5213C EE 5223C EE 5213A EE 5223A EE 5213P EE 5223P EE

Valve actionate de bobina 15mm Caracteristici 3/2,1/8,NC,DC,rev arc 3/2,1/4,NC,DC,rev arc 3/2,1/8,2xbob DC 3/2,1/4,2xbob DC 5/2,1/8,DC,rev arc 5/2,1/4,DC,rev arc 5/2,1/8,2xbob DC 5/2,1/4,2xbob DC 5/3,1/8,CI,2xbob DC 5/3,1/8,CD,2xbob DC 5/3,1/8,CP,2xbob DC 5/3,1/4,CI,2xbob DC 5/3,1/4,CD,2xbob DC 5/3,1/4,CP,2xbob DC Valve ISO 5599/1 - size 1 Caracteristici 5/2,pilot aer,rev arc 5/2,2xpilot aer 5/2,pilot bob,rev arc 5/2,2xpilot bob 5/2,pilot bob,com sep aer,rev arc 5/2,2xpilot bob com sep aer 5/3,CI,2xpilot aer 5/3,CD,2xpilot aer 5/3,CP,2xpilot aer 5/3,CI,2xpilot bob 5/3,CD,2xpilot bob 5/3,CP,2xpilot bob

Cod 382 ME 582 ME 382 EE 582 EE 382 MC 582 MC

Valve actionate manual Caracteristici 3/2,1/8,NC,interf panou,rev arc 5/2,1/8,interf panou,rev arc 3/2,1/8,levier 90,rev arc 3/2,1/4,levier 90,rev arc 3/2,1/8,levier 90 bistabil 3/2,1/4,levier 90 bistabil 5/2,1/8,levier 90,rev arc 5/2,1/4,levier 90,rev arc 5/2,1/8,levier 90 bistabil 5/2,1/4,levier 90 bistabil 5/3,1/8,CI,levier 90,3 poz 5/3,1/4,CI,levier 90,3 poz 5/3,1/8,CD,levier 90,3 poz 5/3,1/4,CD,levier 90,3 poz 5/3,1/8,CP,levier 90,3 poz 5/3,1/4,CP,levier 90,3 poz 5/3,1/8,CI,levier 90,rev arc centru 5/3,1/4,CI,levier 90,rev arc centru 5/3,1/4,CD,levier 90,rev arc centru 5/3,1/4,CD,levier 90, rev arc centru 5/3,1/8,CP,levier 90,rev arc centru 5/3,1/4,CP,levier 90,rev arc centru 3/2,1/8,top lever bistabil 3/2,1/4,top lever bistabil 5/2,1/8,top lever bistabil 5/2,1/4,top lever bistabil 5/3,1/8,CD,top lever,rev arc cntr 5/3,1/8,CD,top lever,3 poz 4/3,1/4,rotativ,3 poz,CI,port sus 4/3,1/4,rotatic,3 poz,CD,port sus 4/3,1/4,rotativ,3 poz,CI,port lat 4/3,1/4,rotativ,3 poz,CD,port lat

Valve actionate de bobine,pilot dublu bobina Caracteristici 3/2,1/8 3/2,1/4 5/2,1/8 5/2,1/4 5/3,1/8,CI 5/3,1/4,CI 5/3,1/8,CD 5/3,1/4,CD 5/3,1/8,CP 5/3,1/4,CP Valve NAMUR 1/4" Caracteristici 3/2,NC,pilot bob,rev arc 5/2,pilot bob,rev arc 3/2,2xpilot bob 5/2,2xpilot bob 3/2,NC,pilot aer,rev arc 5/2,pilot aer,rev arc

Cod 252 MC 252 CC 252 ME 252 EE 253C CC 253A CC 253P CC 253C EE 253A EE 253P EE

Valve ISO 5599/1 - size 2 Caracteristici 5/2,pilot aer,rev arc 5/2,2xpilot aer 5/2,pilot bob,rev arc 5/2,2xpilot bob 5/3,CI,2xpilot aer 5/3,CD,2xpilot aer 5/3,CP,2xpilot aer 5/3,CI,2xpilot bob 5/3,CD,2xpilot bob 5/3,CP,2xpilot bob

Cod 851 MC 851 CC 8513C CC 8513A CC

Valve VDMA 18mm,pilotate aer Caracteristici 5/2,pilot aer,rev arc 5/2,2xpilot aer 5/3,CI,2xpilot aer 5/3,CD,2xpilot aer

851

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 24

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation Valve ISO 5599/1 - size 3 Caracteristici 5/2,pilot aer,rev arc 5/2,2xpilot aer 5/2,pilot bob,rev arc 5/2,3xpilot bob 5/3,CI,2xpilot aer 5/3,CD,2xpilot aer 5/3,CP.2xpilot aer 5/3,CI,2xpilot bob 5/3,CD,2xpilot bob 5/3,CP,2xpilot bob

Cod 352 MC 352 CC 352 ME 352 EE 353C CC 353A CC 353P CC 353C EE 353A EE 353P EE

Valve 16mm,1/8",actionate mecanic si manual Cod Caracteristici 3/2,buton,rev arc 431 MP 5/2,buton,rev arc 451 MP 3/2,roller lever scurt,rev arc 431 MR 5/2,roller lever scurt,rev arc 451 MR 3/2,roller lever lung,rev arc 431 MRL 5/2,roller lever lung,rev arc 451 MRL 3/2,buton rosu 431 MGR 3/2,buton galben 431 MGG 3/2,buton verde 431 MGV 3/2,buton negru 431 MGN 5/2,buton rosu 451 MGR 5/2,buton galben 451 MGG 5/2,buton verde 451 MGV 5/2,buton negru 451 MGN 3/2,lever unidir,rev arc 431 MRU 5/2,lever sus,bistabil unidir,rev arc 451 MRU 3/2,lever toate dir,rev arc 431 MLL 2/2,lever toate dir,rev arc 421 MLL 5/2,lever toate dir,rev arc 451 MLL 5/2,lever sus,bistabil 451 LL

Cod 851 ME 00 851 ME 01 851 ME 02 851 ME 03 851 ME 04 851 EE 00 851 EE 01 851 EE 02 851 EE 03 851 EE 04 8513C EE 00 8513C EE 01 8513C EE 02 8513C EE 03 8513C EE 04 8513A EE 00 8513A EE 01 8513A EE 02 8513A EE 03 8513A EE 04

Cod 731 ME 00 731 ME 01 731 ME 02 731 ME 03 731 ME 04 751 ME 00 751 ME 01 751 ME 02 751 ME 03 751 ME 04 751 EE 00 751 EE 01 751 EE 02 751 EE 03 751 EE 04

Valve VDMA 18mm actionate bobina Caracteristici 5/2,bob 12VDC,rev arc 5/2,bob 24VDC,rev arc 5/2,bob 24VAC,rev arc 5/2,bob 110V AC,rev arc 5/2,bob 220VAC,rev arc 5/2,2x12VDC 5/2,2x24VDC 5/2,2x24VAC 5/2,2x110VAC 5/2,2x220VAC 5/3,CI,2x12VDC 5/3,CI,2x24VDC 5/3,CI,2x24VAC 5/3,CI,2x110VAC 5/3,CI,2x220VAC 5/3,CD,2x12VDC 5/3,CD,2x24VDC 5/3,CD,2x24VAC 5/3,CD,2x110VAC 5/3,CD,2x220VAC

Valve 18mm in linie actionate bobina 1/8" Caracteristici 3/2,NC,12VDC,rv arc 3/2,NC,24VDC,rv arc 3/2,NC,24VAC,rv arc 3/2,NC,110VAC,rv arc 3/2,NC,220VAC,rv arc 5/2,12VDC,rev arc 5/2,24VDC,rev arc 5/2,24VAC,rev arc 5/2,110VAC,rev arc 5/2,220VAC,rev arc 5/2,2x12VDC 5/2,2x24VDC 5/2,2x24VAC 5/2,2x110VAC 5/2,2x220VAC

Cod 951 MC 951 CC 9513C CC 9513A CC 9513P CC

Valve VDMA 25mm,pilotate aer Caracteristici 5/2,pilot aer.rev arc 5/2,2xpilot aer 5/3,CI,2xpilot aer 5/3,CD,2xpilot aer 5/3,CP,2xpilot aer

Cod 951 ME 01 951 EE 01 951 EE 02 9513C EE 01 9513A EE 01 9513P EE 01

Valve VDMA 25mm, actionate bobina Caracteristici 5/2,24VDC,rev arc 5/2,2x24VDC 5/2,2x24VAC 5/3,CI,2X24VDC 5/3,CD,2x24VDC 5/3,CP,2x24VDC

Cod 451 MC 451 CC

Valve 16mm in linie pilotate aer 1/8" Caracteristici 5/2,pilot aer,rev arc 5/2,2xpilot aer

Cod 451P ME 451P EE

Valve 16mm in linie pilotate bobina 1/8" Caracteristici 5/2,pilot bob,rev arc 5/2,2xpilot bob

Cod 731 MC 731 MCA 751 MC 731 CC 751 CC 7513C CC 7513A CC

Valve 18mm in linie pilotate aer 1/8" Caracteristici 3/2,NC,pilot aer,rev arc 3/2,NO,pilot aer,rev arc 5/2,pilot aer,rev arc 3/2,2xpilot aer 5/2,2xpilot aer 5/3,CI,2xpilot aer 5/3,CD,2xpilot aer

951

Cod 324 MC 324 MCA 324 CFP 324 CC 324 CCD 524 MC 524 CFP 524 CC 524 CCD 5243C CC 5243A CC 5243P CC

Valve 1/2 pilotate aer Caracteristici 3/2,NC,pilot aer,rev arc 3/2, NO,pilot aer,rev arc 3/2,NC,pilot aer,rev aer arc 3/2,2xpilot aer 3/2,2xpilot aer cu dif 5/2,pilot aer,rev arc 5/2,pilot aer,rev aer arc 5/2,2xpilot aer 5/2,2xpilot aer cu dif 5/3,CI,2xpilot aer 5/3,CD,2xpilot aer 5/3,CP,2xpilot aer

Cod 324 ME 324 MEA 324 EE 524 ME 524 EFP 524 ME AS 524 EE 524 EED 524 EE AS 5243C EE 5243A EE 5243P EE

Valve 1/2 pilotate bobina Caracteristici 3/2,NC,pilot bob,rev arc 3/2,NO,pilot bob,rev arc 3/2,2xpilot bob 5/2,pilot bob,rev arc 5/2,pilot bob,rev aer arc 5/2,pilot bob com sep aer,rev arc 5/2,2xpilot bob 5/2,2xpilot bob cu dif 5/2,2xpilot bob com sep aer 5/3,CI,2xpilot bob 5/3,CD,2xpilot bob 5/3,CP,2xpilot bob

Cod 00.167.0 00.028.0 00.029.0 00.030.0 00.031.0

Bobine 22 mm Caracteristici 12V DC 24V DC 24V AC 110V AC 220V AC

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 25

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation Cod 00.258.0 00.259.0 00.260.0 00.261.0

Bobine 30 mm Caracteristici 24 V DC 24 V AC 110 V AC 220 V AC

Cod 00.197.0 00.251.0

Cilindri pneumatici - Pneumatic cylinders M21S10

Microcilindri ISO 6432 nemagnetici simplu efect arc revenire Cod Caracteristici(diam. X cursa) 10x10 M21S10100010 10x25 M21S10100025 10x50 M21S10100050 12x10 M21S10120010 12x25 M21S10120025 12x50 M21S10120050 16x10 M21S10160010 16x25 M21S10160025 16x50 M21S10160050 20x10 M21S10200010 20x50 M21S10200050 25x25 M21S10250025 25x50 M21S10250050

M21M20

Microcilindri ISO 6432 magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 10x10 M21M20100010 10x25 M21M20100025 10x50 M21M20100050 10x80 M21M20100080 10x100 M21M20100100 10x125 M21M20100125 10x160 M21M20100160 10x200 M21M20100200 12x10 M21M20120010 12x25 M21M20120025 12x50 M21M20120050 12x80 M21M2012080 12x100 M21M20120100 12x125 M21M20120125 12x160 M21M20120160 12x200 M21M20120200 16x10 M12M20160010 16x25 M21M20160025 16x50 M21M20160050 16x80 M21M20160080 16x100 M21M20160100 16x125 M21M20160125 16x160 M21M20160160 16x200 M21M20160200 16x250 M21M20160250 16x320 M21M20160320 20x10 M21M20200010 20x25 M21M20200025 20x50 M21M20200050 20x80 M21M20200080 20x100 M21M20200100 20x125 M21M20200125 20x160 M21M20200160 20x200 M21M20200200 20x250 M21M20200250 20x320 M21M20200320 25x10 M21M20250010 25x25 M21M20250025 25x50 M21M20250050 25x80 M21M20250080 25x100 M21M20250100 25x125 M21M20250125 25x160 M21M20250160 25x200 M21M20250200 25x250 M12M20250250 25x320 M21M20250320

Conector bobina Caracteristici Conector bobina 22 mm Conector bobina 30 mm

Made in

M21S20

Microcilindri ISO 6432 nemagnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 10x10 M21S20100010 10x25 M21S20100025 10x50 M21S20100050 10x80 M21S20100080 10x100 M21S20100100 10x125 M21S20100125 10x160 M21S20100160 10x200 M21S20100200 12x10 M21S20120010 12x25 M21S20120025 12x50 M21S20120050 12x80 M21S20120080 12x100 M21S20120100 12x125 M21S20120125 12x160 M21S20120160 12x200 M21S20120200 16x10 M21S20160010 16x25 M21S20160025 16x50 M21S20160050 16x80 M21S20160080 16x100 M21S20160100 16x125 M21S20160125 16x160 M21S20160160 16x200 M21S20160200 16x250 M21S20160250 16x320 M21S20160320 20x10 M21S20100010 20x25 M21S20200025 20x50 M21S20200050 20x80 M21S20200080 20x100 M21S20200100 20x125 M21S20200125 20x160 M21S20200160 20x200 M21S20200200 20x250 M21S20200250 20x320 M21S20200320 25x10 M21S20250010 25x25 M21S20250025 25x50 M21S20250050 25x80 M21S20250080 25x100 M21S20250100 25x125 M21S20250125 25x160 M21S20250160 25x200 M21S20250200 25x250 M21S20250250 25x320 M21S20250320

M21S30

Microcilindri ISO 6432 nemagnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 20x25 M21S30200025 20x50 M21S30200050 20x80 M21S30200080 20x100 M21S30200100 20x125 M21S30200125 20x160 M21S30200160 20x200 M21S30200200 20x250 M21S30200250 20x320 M21S30200320 25x25 M21S30250025 25x50 M21S30250050 25x80 M21S30250080 25x100 M21S30250100 25x125 M21S30250125

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 26

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation M21M30

Microcilindri ISO 6432 magnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 20x25 M21M30200025 20x50 M21M30200050 20x80 M21M30200080 20x100 M21M30200100 20x125 M21M30200125 20x160 M21M30200160 20x200 M21M30200200 20x250 M21M30200250 20x320 M21M30200320 25x25 M21M30250025 25x50 M21M30250050 25x80 M21M30250080 25x100 M21M30250100 25x125 M21M30250125 25x160 M21M30250160 25x200 M21M30250200 25x250 M21M30250250 25x320 M21M30250320

M21S30

Microcilindri ISO 6432 nemagnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 25x160 M21S30250160 25x200 M21S30250200 25x250 M21S30250250 25x320 M21S30250320

Cod GPM010 GPM12-16 GPM20-25

Piulita pentru capat cilindru Caracteristici 10-M12x1.25 12-16 - M16x1.5 20-25 - M22x1.5

Cod PDMC08-10 PDMC12-16 PDMC20-25

Picior montare Caracteristici 08-10 12-16 20-25

Cod FLMC08-10 FLMC12-16 FLMC20-25

Flansa Caracteristici 08-10 12-16 20-25

Cod CCMC08-10 CCMC12-16 CCMC20-25

Furca Caracteristici 08-10 12-16 20-25

GPM

PDMC

FLMC

CCMC

Cilindri rotunzi T11M20

Cilindri rotunzi magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 32x50 T11M20320050 32x100 T11M20320100 32x125 T11M20320125 40x50 T11M20400050 40x100 T11M20400100 50x80 T11M20500080

Cod GPT032 GPT040 GPT050

Piulita Caracteristici 32 40 50

Cod CCR032 CCR040 CCR050

Furca Caracteristici 32 40 50

GPT

CCR

T11M30

Cilindri rotunzi magnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 32x50 T11M30320050 32x100 T11M30320100 32x125 T11M30320125 40x50 T11M30400050 40x100 T11M30400100 50x80 T11M30500080

FPT Cod FPT032 FPT040 FPT050

Picior montare Caracteristici 32 40 50

Cilindri tip cartus Cilindru cartus tija filetata nemagnetici simplu efect revenire arc Cod Caracteristici 6x10 20.101.4 10x10 20.104.4 10x15 20.105.4 16x15 20.108.4

Cilindru cartus tija nefiletata nemagnetici simplu efect revenire arc Cod Caracteristici 6x10 20.110.4 10x10 20.113.4 10x15 20.114.4 16x15 20.117.4

Cilindri presori

Cod 17.066.0 17.062.0 17.067.0 17.068.0 17.060.0 17.061.0 17.069.0

Cilindri presori cu tampon impingere Caracteristici 25x8 25x75 25x110 35x8 35x75 35x110 35x75

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 27

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation N11M2032

Cilindri magnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 32x25 N11M20320025 32x50 N11M20320050 32x75 N11M20320075 32x80 N11M20320080 32x100 N11M20320100 32x150 N11M20320150 32x200 N11M20320200 32x250 N11M20320250 32x300 N11M20320300 32x350 N11M20320350 32x400 N11M20320400 32x800 N11M20320800

N11M2050

Cilindri magnetici dublu efect amortizat Cod Caracteristici 50x25 N11M20500025 50x50 N11M20500050 50x80 N11M20500080 50x100 N11M20500100 50x125 N11M20500125 50x150 N11M20500150 50x200 N11M20500200 50x250 N11M20500250 50x300 N11M20500300 50x350 N11M20500350 50x400 N11M20500400 50x450 N11M20500450 50x500 N11M20500500 50x600 N11M20500600 50x650 N11M20500650 50x700 N11M20500700 50x800 N11M20500800 50x900 N11M20500900 50x1000 N11M20501000

N11M2080

Cilindri magnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 80x80 N11M20800080 80x100 N11M20800100 80x125 N11M20800125 80x150 N11M20800150 80x200 N11M20800200 80x250 N11M20800250 80x300 N11M20800300 80x350 N11M20800350 80x400 N11M20800400 80x600 N11M20800600 80x700 N11M20800700 80x800 N11M20800800 80x1000 N11M20801000

Cilindri ISO 6431 VDMA N11M2040

Cilindri magnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 40x50 N11M20400050 40x80 N11M20400080 40x100 N11M20400100 40x125 N11M20400125 40x150 N11M20400150 40x200 N11M20400200 40x250 N11M20400250 40x300 N11M20400300 40x350 N11M20400350 40x400 N11M20400400 40x450 N11M20400450 40x500 N11M20400500 40x600 N11M20400600 40x700 N11M20400700 40x800 N11M20400800 40x1000 N11M20401000

N11M2063

Cilindri magnetici dublu efect amortizat Cod Caracteristici 63x50 N11M20630050 63x80 N11M20630080 63x100 N11M20630100 63x125 N11M20630125 63x150 N11M20630150 63x200 N11M20630200 63x250 N11M20630250 63x300 N11M20630300 63x350 N11M20630350 63x400 N11M20630400 63x450 N11M20630450 63x500 N11M20630500 63x600 N11M20630600 63x700 N11M20630700 63x750 N11M20630750 63x1000 N11M20631000

N11M2100

Cilindri magnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 100x80 N11M21000080 100x100 N11M21000100 100x125 N11M21000125 100x200 N11M21000200 100x300 N11M21000300 100x350 N11M21000350 100x400 N11M21000400 100x450 N11M21000450 100x500 N11M21000500 100x550 N11M21000550 100x650 N11M21000650 100x700 N11M21000700 100x1000 N11M21001000 Cilindri magnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 160x50 N11M21600050 160x100 N11M21600100 160x150 N11M21600150 160x200 N11M21600200 160x300 N11M21600300 160x500 N11M21600500 160x800 N11M21600800 160x1000 N11M21601000

N11M2125

Cilindri magnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 125x25 N11M21250025 125x200 N11M21250200 125x250 N11M21250250 125x300 N11M21250300 125x400 N11M21250400 125x650 N11M21250650 125x700 N11M21250700 125x900 N11M21250900

N11M2160

N11M2200

Cilindri magnetici dublu efect amortizat Cod Caracteristici(diam. X cursa) 200x150 N11M2200150 200x250 N11M2200250 200x400 N11M2200400 200x500 N11M2200500 200x600 N11M2200600

CMSS Cod CMSS032 CMSS040 CMSS050 CMSS063 CMSS080 CMSS100 CMSS125 CMSS160 CMSS200

Balama tata ingusta,cap articulat DIN 648 K Caracteristici(diam. X cursa) ø32 ø40 ø50 ø63 ø80 ø100 ø125 ø160 ø200

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 28

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation Balama tata MP4 Caracteristici ø32 ø40 ø50 ø63 ø80 ø100 ø125 ø160 ø200

CFIS

Cod CMIS032 CMIS040 CMIS050 CMIS063 CMIS080 CMIS100 CMIS125 CMIS160 CMIS200

Flansa Caracteristici ø32 ø40 ø50 ø63 ø80 ø100 ø125 ø160 ø200

PBIS

Cod FLIS032 FLIS040 FLIS050 FLIS063 FLIS080 FLIS100 FLIS125 FLIS160 FLIS200

CMIS

FLIS

Cod CIN032 CIN040 CIN050 CIN063 CIN080 CIN100 CIN125

Pivot intermediar numai pt seria N Caracteristici ø32 ø40 ø50 ø63 ø80 ø100 ø125

Cod COIS032 COIS040 COIS050 COIS063 COIS080 COIS100 COIS125 COIS160 COIS200

Legatura rectangulara - norma CETOP RP107P Caracteristici ø32 ø40 ø50 ø63 ø80 ø100 ø125 ø160 ø200

CIN

COIS

FR Cod FR8C10 FR12C16 FRC20 FR25C32 FRC40 FR50C63 FR80C100 FRC125 FR160C200 RS / SH Cod RS1-A RS1-A 5MT RS2-A RS3-A RS4-A RS5-C RS6-3F RS7-3F SH1-P SH2-9

Furca Caracteristici ø8-10, M4X0.7 ø12-16, M6X1 ø20, M8X1.25 ø25-32, M10X1.25 ø40, M12X1.25 ø50-63, M16X1.5 ø80-100, M20X1.5 ø125, M27X2 ø160-200, M36X2

Cod CFIS032 CFIS040 CFIS050 CFIS063 CFIS080 CFIS100 CFIS125 CFIS160 CFIS200

Cod PBIS032 PBIS040 PBIS050 PBIS063 PBIS080 PBIS100 PBIS125 PBIS160 PBIS200 SNINT Cod SNINT032B SNINT040-050B SNINT063-080B SNINT140-125B

Balama mama MP2 cu pin Caracteristici ø32 ø40 ø50 ø63 ø80 ø100 ø125 ø160 ø200 Picior Caracteristici ø32 ø40 ø50 ø63 ø80 ø100 ø125 ø160 ø200 Suport pt pivot intermediar Caracteristici ø32 ø40-ø50 ø63-ø80 ø100-ø125

Cod DSMC8-10 DSMC12-16 DSMC20 DSIS032 DSIS040 DSIS05063 DSIS080100 DSIS125 DSIS160200

Piulita Caracteristici ø8-ø10,M4x0.7 ø12-ø16,M6x1 ø20,M8x1.25 ø25-ø32,M10x1.25 ø40,M12x1.25 ø50-ø63,M16x1.5 ø80-ø100,M20x1.5 ø125,M27x2 ø160-ø200,M36x2

Cod TS8T10 TS12T16 TST20 TS25T32 TST40 TS50T63 TS80T100 TST125 TS160T200

Articulatie sferica Caracteristici ø8-10, M4X0.7 ø12-16, M6X1 ø20, M8X1.25 ø25-32, M10X1.25 ø40, M12X1.25 ø50-63, M16X1.5 ø80-100, M20X1.5 ø125, M27X2 ø160-200, M36X2

DSMC/DSIS

TS

Senzori cilindri Caracteristici REED 2 fire,5-130VACDC, cablu 2 m,ND REED 2 fire,5-130VACDC, cablu 5 m,ND REED 2 fire,5-50VACDC, cablu 30 cm,ND,M8 REED 2 fire,5-230VACDC, cablu 2 m,ND REED 2 fire,5-230VACDC, cablu 30 cm,ND,M12 REED 2 fire,5-130VACDC, cablu 2 m,NI REED 3 fire,5-30VACDC, cablu 2 m,ND REED 3 fire,5-30VACDC, cablu 30 cm,ND,M8 HALL PNP 3 fire 5-30VDC cablu 2m HALL PNP 3 fire 5-30VDC cablu 30 cm M8

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 29

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation Cilindri compacti P11M2040

P11M2032

Cilindri compacti dublu efect neamortizati Cod Caracteristici(diam. X cursa) 32x5 P11M20320005 32x10 P11M20320010 32x25 P11M20320025 32x30 P11M20320030 32x40 P11M20320040 32x50 P11M20320050 32x75 P11M20320075 32x80 P11M20320080 32x100 P11M20320100 32x125 P11M20320125 32x150 P11M20320150 32x160 P11M20320160 32x200 P11M20320200

Cilindri compacti dublu efect neamortizati Cod Caracteristici(diam. X cursa) 40x5 P11M20400005 40x10 P11M20400010 40x25 P11M20400025 40x30 P11M20400010 40x40 P11M20400040 40x50 P11M20400050 40x75 P11M20400075 40x80 P11M20400080 40x100 P11M20400100 40x125 P11M20400125 40x150 P11M20400150 40x160 P11M20400160 40x200 P11M20400200

P11M2050

Cilindri compacti dublu efect neamortizati Cod Caracteristici(diam. X cursa) 50x5 P11M20500005 50x10 P11M20500010 50x25 P11M20500025 50x30 P11M20500010 50x40 P11M20500040 50x50 P11M20500050 50x75 P11M20500075 50x80 P11M20500080 50x100 P11M20500100 50x125 P11M20500125 50x150 P11M20500150 50x160 P11M20500160 50x200 P11M20500200

P11M2063

Cilindri compacti dublu efect neamortizati Cod Caracteristici(diam. X cursa) 63x5 P11M20630005 63x10 P11M20630010 63x25 P11M20630025 63x30 P11M20630010 63x40 P11M20630040 63x50 P11M20630050 63x75 P11M20630075 63x80 P11M20630080 63x100 P11M20630100 63x125 P11M20630125 63x150 P11M20630150 63x160 P11M20630160 63x200 P11M20630200

P11M2080

Cilindri compacti dublu efect neamortizati Cod Caracteristici(diam. X cursa) 80x5 P11M20800005 80x10 P11M20800010 80x25 P11M20800025 80x30 P11M20800010 80x40 P11M20800040 80x50 P11M20800050 80x75 P11M20800075 80x80 P11M20800080 80x100 P11M20800100 80x125 P11M20800125 80x150 P11M20800150 80x160 P11M20800160 80x200 P11M20800200

P11M2100

Cilindri compacti dublu efect neamortizati Cod Caracteristici(diam. X cursa) 100x5 P11M21000005 100x10 P11M21000010 100x25 P11M21000025 100x30 P11M21000010 100x40 P11M21000040 100x50 P11M21000050 100x75 P11M21000075 100x80 P11M21000080 100x100 P11M21000100 100x125 P11M21000125 100x150 P11M21000150 100x160 P11M21000160 100x200 P11M21000200

Cilindri cursa scurta D11M2016

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 16x5 D11M20160005 16x10 D11M20160010 16x25 D11M20160025 16x30 D11M20160030 16x40 D11M20160040

D11M2020

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 20x5 D11M20200005 20x10 D11M20200010 20x25 D11M20200025 20x30 D11M20200030 20x40 D11M20200040

D11M2025

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 25x5 D11M20250005 25x10 D11M20250010 25x25 D11M20250025 25x30 D11M20250030 25x40 D11M20250040 25x50 D11M20250050

D11M2032

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 32x5 D11M20320005 32x10 D11M20320010 32x25 D11M20320025 32x30 D11M20320030 32x40 D11M20320040 32x50 D11M20320050

D11M2040

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 40x5 D11M20400005 40x10 D11M20400010 40x25 D11M20400025 40x30 D11M20400030 40x40 D11M20400040 40x50 D11M20400050

D11M2050

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 50x5 D11M20500005 50x10 D11M20500010 50x25 D11M20500025 50x30 D11M20500030 50x40 D11M20500040 50x50 D11M20500050

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 30

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation D11M2063

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 63x5 D11M20630005 63x10 D11M20630010 63x25 D11M20630025 63x30 D11M20630030 63x40 D11M20630040 63x50 D11M20630050 63x75 D11M20630075

D11M2100

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 100x5 D11M21000005 100x10 D11M21000010 100x25 D11M21000025 100x30 D11M21000030 100x40 D11M21000040 100x50 D11M21000050 100x75 D11M21000075 100x100 D11M21000100

D11M2080

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 80x5 D11M20800005 80x10 D11M20800010 80x25 D11M20800025 80x30 D11M20800030 80x40 D11M20800040 80x50 D11M20800050 80x75 D11M20800075 80x100 D11M20800100

Cilindri cursa scurta anti-rotatie D11L2016

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 16x5 D11L20160005 16x10 D11L20160010 16x25 D11L20160025 16x30 D11L20160030 16x40 D11L20160040

D11L2020

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 20x5 D11L20200005 20x10 D11L20200010 20x25 D11L20200025 20x30 D11L20200030 20x40 D11L20200040 20x50 D11L20200050

D11L2025

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 25x5 D11L20250005 25x10 D11L20250010 25x25 D11L20250025 25x30 D11L20250030 25x40 D11L20250040 25x50 D11L20250050

D11L2032

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 32x5 D11L20320005 32x10 D11L20320010 32x25 D11L20320025 32x30 D11L20320030 32x40 D11L20320040 32x50 D11L20320050

D11L2040

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 40x5 D11L20400005 40x10 D11L20400010 40x25 D11L20400025 40x30 D11L20400030 40x40 D11L20400040 40x50 D11L20400050

D11L2050

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 50x5 D11L20500005 50x10 D11L20500010 50x25 D11L20500025 50x30 D11L20500030 50x40 D11L20500040 50x50 D11L20500050

D11L2063

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 63x5 D11L20630005 63x10 D11L20630010 63x25 D11L20630025 63x30 D11L20630030 63x40 D11L20630040 63x50 D11L20630050 63x75 D11L20630075

D11L2080

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 80x5 D11L20800005 80x10 D11L20800010 80x25 D11L20800025 80x30 D11L20800030 80x40 D11L20800040 80x50 D11L20800050 80x75 D11L20800075 80x100 D11L20800100

D11L2100

Cilindri magnetici dublu efect neamortizat Cod Caracteristici(diam. X cursa) 100x5 D11L21000005 100x10 D11L21000010 100x25 D11L21000025 100x30 D11L21000030 100x40 D11L21000040 100x50 D11L21000050 100x75 D11L21000075 100x100 D11L21000100

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 31

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation CILINDRI FARA TIJA Cilindri baza

OPL Cod OPL16-00000-xxx OPL25-00000-xxx OPL32-00000-xxx OPL40-00000-xxx OPL50-00000-xxx OPL63-00000-xxx OPL80-00000-xxx

Caracteristici baza (diametru) 16 25 32 40 50 63 80

Cod

Caracteristici baza (diametru) 16 25 32 40 50

OPL16-00000-xxx OPL25-00000-xxx OPL32-00000-xxx OPL40-00000-xxx OPL50-00000-xxx OPL63-00000-xxx OPL80-00000-xxx

Cursa mm xxx xxx xxx xxx xxx xxx xxx

Cilindri cu recirculare ghid rulment

OPL-KF OPL-KF16-00000-x OPL-KF25-00000-x OPL-KF32-00000-x OPL-KF40-00000-x OPL-KF50-00000-x

OPL-KF16-00000-x OPL-KF25-00000-x OPL-KF32-00000-x OPL-KF40-00000-x OPL-KF50-00000-x

Cursa mm x x x x x

ASCO Vane 2/2 act pneumatica tip piston Cod SCG353A070 SCG353A071

E290 Cod E290A791 E290A792 E290A793 E290A395 E290A059 E290A063 E290A067 E290A501

Valve puls NC Caracteristici G 3/4 G1

2/2, NI - intrare sub disc, otel disc Caracteristici G 3/8, 4 - 10 bar G 1/2, 4 - 10 bar G 3/4, 4 - 10 bar G 1, 4- 10 bar G 1 1/4, 4 -10 bar G 1 1/2, 4 - 10 bar G 2, 4 - 10 bar G 2 1/2, 4 - 10 bar

E290

2/2, NC-intrare deasupra discului(pt abur), otel inox Cod Caracteristici E290A399 G 1/2, 3 - 10 bar E290B081 G 1, 2.5 - 10 bar

E290

2/2, NC-intrare deasupra discului(pt abur), bronz Cod Caracteristici E290A390 G 1/2, 3 -10 bar E290B038 G 1, 2.5 - 10 bar E290A040 G 1 1/2, 2.5 -10 bar E290A043 G 2, 3 - 10 bar

L145R

Valva 2/2 NC pilot garnitura PTFE abur 170â ° C Cod Caracteristici L145R2 G3/8 G 3/8 DN 10 L145R2 G1/2 G 1/2 DN 10 L145R4 G3/4 G 3/4 DN 16 L145R2 G1 G 1 DN 16.5

L176V03 Cod L176V03 L176V03 L176V03 L176V03 L133

Valva 2/2 NC actionare directa 1/4 Caracteristici DN 1.6 DN 2.4 DN 4 DN 5

Valva 2/2 NC pilot diafragma garnitura FPM 130: C Cod Caracteristici L133V G 3/8 DN 10 L133V G 1/2 DN 12.5 L133V G 3/4 DN 17 L133V G 1 DN 24

Cod E290A384 E290A385 E290A386 E290A016 E290A020 E290A024 E290A485

2/2,NI - intrare sub disc, bronz Caracteristici G 1/2, 4- 10 bar G 3/4, 4 - 10 bar G 1, 4 - 10 bar G1 1/4, 4 - 10 bar G1 1/2, 4 - 10 bar G 2, 4 -10 bar G2 1/2, 4 - 10 bar

Cod E290A794 E290A795

2/2, ND-intrare sub disc, otel inox Caracteristici G 3/8, 1 - 10 bar G 1/2, 1 - 10 bar

Cod E290A387 E290B028 E290A030 E290A032 E290A034

2/2, ND-intrare sub disc, bronz Caracteristici G 1/2, 3 - 10 bar G 1, 2 - 10 bar G 1 1/4, 2 - 10 bar G 1 1/2 , 2 -10 bar G 2 , 2 -10 bar

Cod SCG353A043 SCG353A044 SCG353A050

Valve desprafuire actionare electrica Caracteristici G 3/4" G 1" G 2"

Cod G353A041 G353A042 G353A045

Valve desprafuire actionare pneumatica Caracteristici G 3/4" G 1" G1 1/ 2"

Cod L172V03 L172V03 L172V03 L172V03

Valva 2/2 NC actiune directa 1/8 Caracteristici DN 1.2 DN 1.6 DN 2 DN 2.4

E290

E290

E290

SCG353

G353

L172V03

L282V01 Cod L282V01 L282V01 L282V01 L282V01

Valva 2/2 NO pilot actiune Caracteristici G 3/8 DN 13.5 G 1/2 DN 13.5 G 3/4 DN 18 G 1 DN 24

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 32

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation Valve cu actuator penumatici, electrici - Valve cu actionare manuala

Cod 8P016100 8P016100 8P016100 8P016100 8P016100 8P016100 8P016100 8P016100 8P016100 8P016100

Valva PVC 2 cai cu bila cu actuator Caracteristici DN 10 PN 16 DN 15 PN 16 DN 20 PN 16 DN 25 PN 16 DN 32 PN 16 DN 40 PN 16 DN 50 PN 16 DN 65 PN 10 DN 80 PN 10 DN 100 PN 10

Valva tip fluture PN16 corp fonta GGG40 cu actuator Cod Caracteristici 8P010500 DN 50 8P010500 DN 65 8P010500 DN 80 8P010500 DN 100 8P010500 DN 125 8P010500 DN 150 8P010500 DN 200 8P010500 DN 250 8P010500 DN 300

Valva tip fluture PN16 corp fonta G250 cu actuator Cod Caracteristici 8P009700 DN 50 8P009700 DN 65 8P009700 DN 80 8P009700 DN 100 8P009700 DN 125 8P009700 DN 150 8P009700 DN 200 8P009700 DN 250 8P009700 DN 300

Cod 8P007900 8P007900 8P007900 8P007900 8P007900 8P007900 8P007900 8P007900 8P007900 8P007900 8P007900

Valva 2 cai alama nichelata cu actuator PN40 Caracteristici 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

Cod F 0005 F 0010 F 0018 F 0030 F 0034 F 0050 F 0072 F 0095 F 0125 F 0165 F 0190 F 0220

Filtre aer standard 16 bar Caracteristici 560 l/min 1170 l/min 1800 l/min 3000 l/min 3400 l/min 5000 l/min 7200 l/min 10400 l/min 12800 l/min 16500 l/min 19000 l/min 22000 l/min

Tratare aer

Cod ED 18 ED 24 ED 54 ED 72 ED 108 ED 144 ED 180 ED 225 ED 260 ED 360 ED 480 ED 660

Uscatoare aer - Air dryers 16 bar Caracteristici 300 l/min 400 l/min 900 l/min 1200 l/min 1800 l/min 2400 l/min 3000 l/min 3750 l/min 4333 l/min 6000 l/min 8000 l/min 11000 l/min

Cod SA 0005 SA 0010 SA 0030 SA 0050 SA 0095 SA 0165 SA 0220 SA 0450

Separatoare condens tip cyclon Caracteristici 500 l/min 1000 l/min 3000 l/min 5000 l/min 9500 l/min 16500 l/min 22000 l/min 45000 l/min

Cod STRATOS COSMOS 2420 KGM50-2 KAB100/360 MC KAB150/360 MC KAB200/400 MC KAB200/515 TC KAB300/800 TC KAB500/981F

Compresoare aer Krug powered by FIAC Caracteristici 24l,170l/min,2 HP, 8bar 24l,170l/min,2 HP, 8bar 50l, 170l/min,2HP,8bar 100l, 360 l/min, 3 HP,10 bar 150l, 330 l/min, 3HP,10 bar 200l, 360 l/min, 4 HP, 10 bar 200l,485 l/min, 4 HP, 10 bar 300l, 800 l/min, 4 HP, 10 bar 500l,981l/min,10 HP, 10 bar

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 33

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation Scule pneumatice Dalta pneumatica

Cod 1039

Caracteristici 113 l/min, 6 bar, 3000 batai/min,1/4

Set biax

Cod 1040

Masina de gaurit Cod 1065

Caracteristici 113 l/min, 6 bar, 1800 rot/min,1/4

Cheie de impact 1/2 Cod 1085

Polizor unghiular Cod 5024

Caracteristici 170 l/min, 6 bar, 0.72 KW,1/4

Caracteristici 113 l/min, 6 bar, 149 Nm,1/4

Cod 5029

Caracteristici 113 l/min, 6 bar, 1/4

Cod 5042

Caracteristici 250 l/min, 6 bar,1.2mm grosime max, 1/4

Caracteristici 113 l/min, 6 bar, 61 Nm,1/4

Pistol de silicon Cod 5041

Foarfeca pneumatica Cod 5074

Caracteristici 170 l/min, 6 bar, 7000 rot/min,1/4

Cheie cu crichet

Pistol de gresat Cod 5040

Caracteristici 260 l/min, 6 bar, 350 Nm,1/4

Slefuitor orbital

Pistol de insurubat Cod 5034

Caracteristici 240 l/min, 6 bar, 22000 rot/min,1/4

Caracteristici 170 l/min, 4 bar,310ml,1/4

Capsator pneumatic Cod 5047

Caracteristici 0.11 l/capsa, 6 bar,5x15-40 lxL,1/4

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 34

Mont Blanc Automatizari Industriale ASCO Numatics, Az Pneumatica, Vuototecnica, Valbia, AVM Automation

CONDIŢII DE COLABORARE • Comenzile se pot face pe baza codurilor din catalog prin: Telefon, Fax, E-mail.

• Transportul mărfii se face la 24 – 48 ore de la comanda pentru produsele aflate in stoc, iar pentru produsele ce se importa termenul de livrare se va confirma ulterior.

• Condiţii de plată:NUMERAR, TRANSFER BANCĂ, FILA CEC/BO CARE VA FI DAT LA FIRMA TRASPORTATOARE, IN MOMETUL RECEPTIONARII MARFII. • Plata se face conform contractelor si a conditiilor comerciale negociate si acceptate.

• În cazul comenzilor a căror valoare depăseste suma de 100,00 EURO (fără TVA), transportul marfii se face gratuit.

• Pentru eventuale reclamaţii, clientul este obligat să anunţe furnizorul în timp de 3 zile.

• Figurinele din catalog sunt doar ilustrative.

Cu stimă, Departamentul comercial CONTACT: S.C. Mont Blanc S.R.L. str. Dacia Nr. 10 IASI Tel.: +40 232 230 200 Fax.: +40 232 230 206 E-mail: office@mont-blanc.ro IASI 0753 310 805 0753 310 800

CLUJ 0753 310 801

PENTRU INFORMAŢII SUPLIMENTARE VĂ RUGAM SĂ NE CONTACTATI LA TELEFOANELE MENŢIONATE MAI SUS SAU E-MAIL.

Mont Blanc I Str. Dacia Nr. 10 I Iasi I 700259 I Tel: +40232230200 I Fax: +40232230206 I office@mont-blanc.ro I www.mont-blanc.ro

Pagina 35