Edit mode (EDIT)
fig.BANK-3
10 Use the [DEC][INC] buttons or the [0]–[F] keys to specify the RPN LSB (CC#100) or NRPN LSB (CC#98). *1 Reference
11 Press the [ENTER] button. 12 If you are making an assignment for a button, specify the button mode. (➔“Specifying the button mode” (p. 158))
Advanced mode In Advanced mode for RPN/NRPN, you can specify the upper and lower limit of the data entry MSB (CC#6) value when the RPN/NRPN message is transmitted, as well as the various settings available in Basic mode. 1. Press the [EDIT] button.
11. Press the [ENTER] button.
2. Slightly move the controller to which you want to assign the RPN or NRPN message. In the case of a button, press that button. The display will indicate the number of the selected controller.
12. The following display will appear. fig.max
*1 Reference
13. Use the [0]–[F] keys to specify the upper limit of the data entry MSB (CC#6) value.
3. Confirm what’s indicated, and press the [ENTER] button.
14. Press the [ENTER] button.
4. Press the [RPN] key and then press key [1].
15. The following display will appear.
*
If you want to assign an NRPN message, press the [NRPN] key. The following procedure is the same as for RPN.
5. Press the [ENTER] button.
fig.min
*1 Reference
16. Use the [0]–[F] keys to specify the lower limit of the data entry MSB (CC#6) value.
6. Input the channel. Use the [DEC][INC] buttons or the [0]–[F] keys to specify the channel.
17. Press the [ENTER] button.
7. Press the [ENTER] button.
18. The display will indicate “P--.” fig.p1
8. Use the [DEC][INC] buttons or the [0]–[F] keys to specify the RPN MSB (CC#101) or NRPN MSB (CC#99).
*1 Reference
9. Press the [ENTER] button.
19. Specify the output port. (➔“Specifying the port” (p. 159))
10. Use the [DEC][INC] buttons or the [0]–[F] keys to specify the RPN LSB (CC#100) or NRPN LSB (CC#98).
20. If you are making an assignment for a button, specify the button mode. (➔“Specifying the button mode” (p. 158))
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value, or will blink if the value is different.
139