12 minute read
METSO OUTOTEC DEBUTS ITS IN-PIT CRUSH, CONVEY SOLUTIONS SERVICE
Page 58 • November 13, 2021 • www.constructionequipmentguide.com •Recycling Section• Construction Equipment Guide New Integrated Solutions... Metso Outotec Debuts Its In-Pit Crush, Convey Solutions Service
Mining operations are impacted by declining head grades. More material needs to be moved from greater depths to maintain concentrated production levels. This affects productivity and energy consumption, which directly correlates to the mine’s profitability and sustainability.
To better meet these challenges, Metso Outotec launched in-pit crush and convey (IPCC) solutions. The integrated solutions consist of crushing, conveying and stacking equipment combined with IPCC planning and lifecycle services. The offering has been designed to ensure the highest productivity, energy efficiency and maintainability.
“With our team, technology and services, we can combine and provide the industry’s strongest building blocks to deliver successful inpit crush and convey operations,” said Leif Berndt, director, IPCC of Metso Outotec. “We are excited to launch our solutions that cater in an exceptional way to our customers’ operational and sustainability targets.”
Metso Outotec’s IPCC Offering
The experience-driven IPCC planning services allow Metso Outotec to support customers with pre-defined study work packages that are in line with common study phases used throughout the industry. The team uses an integrated methodology to determine the optimal pit shape and mine schedule in alignment with system configurations, that utilize advanced engineering tools to increase the speed of project definition and certainty of outcome.
The key technology highlight of the IPCC solution is the Foresight semi-mobile primary gyratory (SMPG) station, which features the Superior MKIII crusher and SmartStation
for optimal processing, allowing material size control and reduced wear, downtime and plant height. The IPCC solutions are part of the company’s Planet Positive portfolio with their improved energy efficiency. Services are a key part and a proven piece of the Metso Outotec IPCC solutions. Life Cycle Services (LCS) for operational support are available. Connected analytics allows equipment to be better managed by staying connected at all times and by reducing unplanned downtime. The IPCC offering also includes offsite and onsite assembly options. Key benefits of Metso Outotec in-pit Metso Outotec launched in-pit crush and convey (IPCC) solutions. crushing and conveying technology include: • Optimal processing with patented SmartStation; • Up to 30 percent higher capacity on the same crusher size and 70 percent reduced downtime with Superior MKIII Primary Gyratory technology; • Up to 30 percent power savings with Energy Savings Idlers (ESI); and • Better maintainability through improved crusher access and plant area isolation. For more information, visit mogroup.com/ipcc.
New Managing Director Takes Rubble Master to Next Level
DIRECTOR from page 54
for others.”
Larger models, including the RM 100GO! and RM 120X “are more appropriate for the larger producers,” McAdam said.
Not Standing Pat
In addition to the acquisition of Maximus and its renewed commitment to the U.S. market, the company is actively involved in the research and development necessary to take the product line to the next level.
Current plans include offering both hybrid and full-electric models in all of its crusher and screener sizes.
Advancements in technology are being aimed not just at efficiency, according to René Wagner, a longtime Rubble Master marketing manager.
Rubble Master now offers RM XSMART, a telemetry and fleet management system that Wagner said contractors “want and need.”
“RM XSMART represents a new era in the interaction between humans and machines,” he said, “It brings clarity and enables owners and operators to make better decisions that lead to more profits. Features include integrated belt scales to track and document output, GPS tracking, fuel consumption tracking, fluid level monitoring, and more.”
Bigger Isn’t Always Better
Rubble Master remains relatively small when compared to many of the companies with whom they compete for market share. That’s a good thing, according to McAdam.
“We are privately owned,” he said. “If we need to do something, make a change, it’s not a committee project. We can be very reactive. That’s where our dealers are seeing an advantage already. “We listen to both our dealers and the end user and react quickly,” he added. “For example, we learned from listening that the time involved in changing the screen media is a big deal to the contractor. We immediately began to work on Jackson McAdam said, “the RM 70GO! and RM 90GO! are 53,000-lb. and bringing a design to market that will cut down on64,000-lb. machines. They are perfect for the contract crushing market.” that time frame.” Rubble Master’s size also allows for a different level of customer care, McAdam said. “Being a Rubble Master customer is not a buy and forget experience,” he said. “It is a partnership, and it requires that we’ll be there for our customers. Machines break down, but what happens next is what matters.” While Rubble Master’s North American market share does not approach the number it enjoys in Europe, things are heading in the right direction, according to McAdam. After enduring COVID-19-related challenges in 2020, he said the first three quarters of 2021 have been the best in its North American history. “COVID actually allowed us the necessary timeframe to create a strategy for growth. We have begun to execute this strategy and have the foundation in place to build on for the next 20 years.” CEG
FORCE MULTIPLIER
A new era is being ushered in with Rammer® fully investing in Allied® Construction Products to deliver enhanced products, service, and support the growing North American markets. The combined forces will be stronger than ever, bringing you the latest Rammer technology with Excellence and Performance Series breakers as well as our pioneering Ho-Pac and Skid-Pac compactor drivers. Together, and stronger than ever, the world-famous Rammer and Allied continue to prove... there’s no match for experience and innovation.
800-321-1046 / www.alliedcp.com
EXPERIENCE & INNOVATION
HIGHWAY EQUIPMENT COMPANY
www.highway-equipment.com
1405 Timken Place SW Canton, OH 44706 330-915-8391
#410073 John Deere 750KLXT dozer with 6 way blade. 75% undercarriage, 165HP motor with 2383 hours, EROPS cab with AC and heat, with sweeps and brushguards. Has Vail 5 pocket ripper with 3 shanks only. Very good condition.
#610125 John Deere 644K. rubber-tire loader w/ quick attach & 4yd 10′ wide GP bucket w/ bolton cutting edge (good to very good condition). 8105 overall hours on JD PowerTech 6068H engine. 23.5R25l3 tires approx 70% on front, 2030% on rear. Enclosed cab w/ AC & heat. Loader runs great, ready for daily use.
#310002 Broderson 15-ton carry deck 4WD crane 45' main boom & 15' jib. GM V-6 gas/ propane hook block and anti-two block. On board computer w/ scales and tip read-out. #510122 Furukawa 1100ED self contained hydraulic rock drill 1321 hours on Cummins QSB6.7 engine & 490 hours on HD818 drifter. FOPS/ROPS cab w/ AC & heat. Auto-rod changer, auto-greaser, dust collector, & anti-jam. Set up for T-45 M/F rods. Includes rear/side view camera & rear bumper. Very good cond.
#154006 "New" Aggretek portable wash plant w/ 6x20 3-deck screen and twin 36"x25' sandscrews complete with electric motors, electric box and starters, wire cloth, and NiHard shoes, all on a 3-axle chassis.
#650000 2011 John Deere 410J backhoe with 1442 hours. 4-in-1 bucket, pilot controls, AC/heat, radio, and quick attach bucket. Like new tires 21L-24-12.5/8-18 #161009 New Willis 36"x60' tube-type radial stacker. w/ 15hp Westinghouse motor, NBS #5 reducer, 4-ply belt, Superior 35 degree CEMA C 4" idlers w/ 4" CEMA C return idlers. Lagged head and wing-tip tail pulleys w/ Dodge bearings. Pintle hitch and pivoted mounting plate.
#154004-Telsmith vibrating 5×16 2-Deck Wet Screen with stand, pre-wash box, and some new AR liners. Has water manifold with water on both decks. No switch gear. Several pieces of screen cloth. Very good condition.
#141154 Anaconda self-contained 4x10 2Deck track-mounted scalping screen w/ 3 hydraulic folding stockpile conveyors & JCB 444 EcoMAX 74HP engine (T4F). Flipdown hopper tailgate for direct feed. Variable speed for all belts. Max feed up to 16" & machine is rated up to 250HP.
DRILLS & COMPRESSORS #530022-Joy RAM EXT air track drill with VCR 360 hammer. Hoses appear to be in working condition. U.C. approx 70%- overall good condition. #510116-Furukawa 15ED Hydraulic Rock Drill. Has twin Isuzu engines. 5667 hours on hydraulics, 4413 hours on compressor, and 5992 impact hours. Very good undercarriage. Enclosed cab w/ AC and heat. Dust collector, auto rod changer. Set up for T51 rod. Overall good condition. #510119 Furukawa HCR1500ED drill. approx 18,100 hours. 8.3 Cummins engine. Runs well, still in use. Well maintained. #580000-Furukawa HD712 drifter with approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation. #520032-Ingersoll Rand 750CFM/300PSI high pressure compressor with Cat 3406 engine. Runs and operates good.
FEEDERS #132015-Continental Gin 48"x25.5' apron feeder. Large feed box. Flights are approx 80+%, good sprocket, & jackshaft drive gears. 60hp motor and gear box, but has removable mount (for transport). Heavy duty apron feeder. Shipping dims: 8' 7" tall & 30' long. #131022 Hewitt Robbins 48"x20' vibrating grizzly feeder (E-11 mechanism) with hopper. Good condition.
JAWS & IMPACTS #111072-Pioneer 3042 jaw on shop built 2 axle chassis with Cedarapids 42"x16' grizzly feeder, 41/2' grizzly bars, jaw dies 95% good, 42" underconveyor, WEG motor, 16' hopper, 3/4" thick hopper sides and ends. Good condition. #112046-Metso Nordberg LT1213S Loko Track mobile crushing & screening plant x47". 12 cubic yard hopper w/ vibrating grizzly feeder. Screening module is 2005. Conveyor width 47" & feed width 43". #111075 Portable Portec/Pioneer SM3042 jaw plant Cummins C-N14 engine (runs good), 42"x16' apron feeder (good flights), & 4x8 2-deck Mesabi w/ reversable 30" underconveyor, 36" undercrusher front delivery conveyor. All on a factory 3-axle chassis. Has onboard electric hydraulic pump & reservoir w/ controls to operate a 4-point hydraulic leveling system for fast set up with legs, onboard fuel tanks, operator platform & controls. Disassembled for transport, ready for work when re-assembled. Will need approx 100kw gen set for electric motors.
EARTHMOVING #410063-CAT D9H w/ EROPS cab w/ A/C, straight blade w/tilt. Single shank, 4-barrel ripper. 24" pads. U/C (overall approx 70%). Rebuilt engine, trans, and finals (HMR 2994) Left Trunnion is available but needs to be installed. Overall good condition. #410070-CAT D6R dozer with 10' straight blade with good cutting edge. Has EROPS cab with air. Glass all good. 22" single grouser pads, overall condition of undercarriage is 60%. Pins have tit on drive side. Has 4600 hrs. #650001 Cat 416B 4WD backhoe with Extendo Hoe 24" bucket w/ teeth. Enclosed ROPS ab w/ heat, no air. Has 7374 hours. Has wobble stick controls. #640064 Cat 325C MH scrap excavator with 16,259 overall hours and rebuilt 3126 engine. New hydraulic magnet generator. UC approx 75%. Runs great. with ball tray on bottom deck. No motor, but was a running take out. Good condition. #142003-Deister 5x16 2-deck horizontal, underslung screen with new bearings
SECONDARY CRUSHERS #121033-Universal 150/230 impactor with completely rebuilt rotor, new shoes, new hammers, and some new liners (inside looks very good). (2) new 350hp electric motors and new drive sheave. Crusher and motor only, no stand. #121029-Humbolt Wedag secondary impact (42" wide/14" max feed) with new set of hammers and some new liners (not installed). 4 bar rotor. No power. Crusher is in good condition. #121053-Cedarapids 5040 Hammermill secondary crusher with 5x16 3-deck screen. Has rotovator, 36" return and 36" front discharge conveyors. All mounted on tandem axle chassis. Plant is all electric except the hammermill is diesel jack shaft driven. No power on mill. Power unit and control panel are available separately for $12,000. Engine runs, but needs to be rebuilt. #123025-Portable Telsmith 48" STD cone w/ 30" feed conveyor w/ 20 HP motor, Dodge TDT5 reducer, 36" undercrusher conveyor w/ WEG 20HP electric motor. Cone has 125HP 1150RPM motor, mounted on factory tandem axle chassis. Good brakes, very good rubber. Good running cone. #121058-Spokane model 74 vertical shaft impact crusher with stand and 250hp electric motor. Has 4shoe table and anvil ring with good shoes and near new anvils. #122002-Pioneer 4030 triple roll portable w/ 36″ feed conveyor, 4×10 Portec Pioneer scalping screen, 36″ discharge conveyor. Tires on chassis are good. No motor included for the rolls.
COMPANY WRENCH
www.companywrench.com 4805 Scooby Lane NW Carroll, OH 43112 866-262-4181 4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-649-8105 1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850 1330 KY-151 Frankfort, KY 40601 502-699-2681
ERB EQUIPMENT COMPANY
www.erbequipment.com 200 Erb Industrial Dr. Fenton, MO 63026 636-349-0200 Foristell, MO 636-463-2500 Cape Girardeau, MO 573-334-0563 Cuba, MO 573-885-0500 Owensboro, KY 270-684-2339 Paducah, KY 270-554-1131 Mount Vernon, IL 618-244-6800 Evansville, IN 812-473-0484
mhl375
F-SERIES
LBAILER
GNORTS . E E. NEICFIEF .T
Dis ecov r M r ore
uF chs or W ld- lC ass
Material Handlers
