COLOUR T ECHNIQUE
1
SECTION 1 FRINGE: Begin part from the high point of the head to just below the recession (temple area) in the front. Using a clip secure with a clip. This section will frame the face shape. SECTION 2 AND 3 SIDES: Part from the high pointy down to the hairline, approximately one inch behind the ear on both side. Using a clip secure with a clip. This will create triangular sections over the ears. SECTION 4 BACK: Create this section by parting off the side sections to form a triangular segment in the center back. Using a clip secure with a clip.
2
• Begin the colour application on section 4 in the back with (1) 7.45 + 1/2 oz. Mix-Copper + 20 Volume Developer.
3
• Apply (2) 6.33 + 1/4 oz. Mix-Copper + 10 Volume Developer from scalp to ends on sections.
• Move to section 1 in the front. Outline the section with (1) 7.45 + 1/2 oz. Mix-Copper + 20 Volume Developer and apply scalp to ends. PROCESSING TIME: 15 minutes prior to applying the colour to the two side sections.
PROCESSING TIME: Process an additional 20 minutes for complete processing of the colour.
PROCESSING T IME Process the colour a TOTAL of 35 minutes.
RINSE AND SHAMPOOING • Rinse the colour thoroughly with luke warm water sneezing the ends to ensure all colour has been removed and remove all extra water. • Apply shampoo using circular motions to massage the scalp creating a lather, rinse using luke warm water, squeezing the ends to remove extra water. • Apply conditioner concentrating on the tips of the hair, rinse thoroughly using luke warm water. • Proceed to use a hair mask (if the hair has any damage this step is recommended) leave the hair mask on for 5 to 10 minutes proceed to rinse thoroughly using luke warm water.
FINISHING OF F Workup the hair by applying hair serum and blowing it out using a round thermal brush.
D E S I R E
TO
C R E A T E