ALIGNMENT & MEASURING
ACCUVISION-3D MEASURING SYSTEM
QUICK42 FRAME ALIGNMENT SYSTEM
Arslan Automotive
Car-O-Liner
Arslan Automotive’s AccuVision-3D Measuring System has a dual use of estimating and repairing. This easy-to-use measuring system allows the user to simply point and measure the upper and lower body in one report. The tool features a new generation UV camera and pointer LEDs. It can also measure in any light condition irrespective of brightness or darkness of the environment -- indoors, outdoors, no levelling needed, no calibrations, no lasers, no arms, no extensions, no magnets, no adaptors, no Wi-Fi, no Bluetooth, no moving parts. The user can place the car on a lift bench or floor unevenly and the software will have no problem doing the job in good time. The AccuVision-3D Measuring system only works with Mitchell data.
The Quick42 is a multi-functional bench that provides easy access for cosmetic repairs. The tool offers the ability for techs to anchor the vehicle on the same platform, if structural repairs are also needed, thus shortening repair cycle times and offering a quick solution to increase shop profitability, according to Car-O-Liner. Compatible with the Car-O-Tronic Vision2 X3 measuring system and EVO Universal Anchoring and Holding System, the company says the Quick42 offers a complete repair solution. This provides technicians a time saving process to easily diagnose, anchor, and repair automobiles to their pre-accident condition. The Quick 42 also features an integrated power unit, removable ramps and a 10-ton draw aligner with 360-degree access and pulling capability.
accuvision-3d.com, arslanauto.com
car-o-liner-us.com
POINT X DIAGNOSTIC MEASURING SYSTEM
NAJA EVOLUTION 3D
Car-O-Liner
Celette
The Point X is a lightweight carbon fibre instrument that acts as an arm for measuring purposes. Point X works with Car-OData, an efficient database alongside Vision 2, a photo based system. The Car-O-Data provides a database for over 8000 vehicle measurements, while the Vision 2’s user friendly interface makes it easier and more efficient to find the measurements from any point around a vehicle.
Celette’s Naja Evolution 3D software uses measurements directly from OEM-provided 3D computer-aided drawings and provides technicians with unique views of the control points in all three dimentions. The Naja features completely wireless Bluetooth software, allowing the ability to blueprint, measure and print both pre- and post-damage reports with a tolerance of 0.5mm. The system includes a calibration check for ISO process, vehicle data for comparative and point-to-point data.
car-o-liner-us.com
celette.com
28 BUYER’S GUIDE COLLISIONREPAIRMAG.COM