2 4 30 35 41 59 65 77 87 99 110 120 130 148 164 167 179 182
HOSES CATALOGUE CODAN RUBBER DANMARK A/S
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
8 January 2015
CODAN HOSES This catalogue contains the current range of Codan quality hoses. Codan manufactures quality hoses to OEM businesses within several industries such as foodstuff, medico, electronics, furniture and design articles. For further information please contact us on Email: info@codan.com or tlf: +45 56646464
This is an interactive document Click the hoses to navigate
AIR & WATER AIR CONDITIONING BRAKE BREATHING BUNKER CHEMICAL COOLANT FOOD GAS HYDRAULIC MATERIAL HANDLING OIL PETROL POWERSTEERING PVC STEAM WELDING & GAS INDEX
(alphabetical display of all products)
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
INDEX This is an interactive document Click the Product number to navigate
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
1005
2005
2802
3310
6001
BRAKE
35
1103
2006
2803
3311
6015
BREATHING
41
1106
2007
2806
3312
6016
BUNKER
59
1158
2010
2808
3418
6017
CHEMICAL
65
1206
2011
2812
3419
7301
COOLANT
77
1207
2033
2813
3421
8002
FOOD
87
1208
2042
2820
3423
8003
GAS
99
1220
2052
2823
3424
8004
HYDRAULIC
110
1222
2057
2901
3501
8007
1225
2106
2903
3512
8008
1227
2111
2915
3514
8009
1228
2116
2920
3516
8021
1229
2118
2930
3550
8024
1232
2120
2940
3581
8031
1235
2151
2950
3582
8033
1236
2152
3002
3583
8034
1240
2206
3006
4002
8035
1243
2300
3009
4004
8037
1255
2315
3010
4006
8038
1316
2321
3011
4025
8040
1518
2322
3012
4084
8502
1600
2323
3020
4205
8503
1605
2601
3024
4219
8504
1633
2605
3106
4411
8505
1701
2606
3111
4426
8512
1703
2612
3121
4801
8516
1705
2614
3122
4804
8519
1900
2636
3123
4820
8520
1902
2654
3133
4854
8522
1905
2656
3135
4893
8525
1915
2700
3140
5034
project
1918
2703
3217
5035
corrugated breathing hose
2000
2710
3301
5036
2001
2801
3304
5038
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
AIR & WATER HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
1005
1236
1106
1240
1103
1255
1207
2001
1208
2007
1220
2116
1222
2118
1225
3301
1227
3304
1228
3310
1229
3311
1232
3312
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
1235
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
AIR & WATER HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Codan 1005 Air / Water Hose
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Codan Normally 1005 installed- using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information. Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan Insfurther i de Outs i de Worki ng for information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Type nr. 1005 Colour: BlackAir / Water Hose Application: Standards: Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester BursOutside: t Bend Ra di us Wei ght Product NR/SBR Pres s ure BAR Black (mm) (g/m) code Colour: Standards: 15 250 420 1005025000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
32,0
38,4
5
15
300
520
1005032000
182
38,0
44,4
5
15
380
610
1005038000 Product 1005045000
WELDING & GAS INDEX
di a . (mm)
25,0
di a . (mm)
31,4
Pres s ure BAR
5
Ins i de 45,0 di a . (mm)
Outs 51,4i de di a . (mm)
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 440 (mm)
Wei 700ght (g/m)
790 420 960
1005051000 1005025000 1005063000
32,0 76,0 38,0 102,0
38,4 82,4 44,4 108,8
5 5 5 5
15 15 15 15
300 750 380 1.000
520 1.450 610 1.580
1005032000 1005076000 1005038000 1005102000
45,0 110,0 51,0 127,0
51,4 117,2 57,4 134,2
5 5 5 5
15 15 15 15
440 1.120 500 1.250
700 1.730 790 2.000
1005045000 1005110000 1005051000 1005127000
63,0 152,0 76,0 203,0
70,0 159,2 82,4 211,4
5 5 5 5
15 15 15 15
630 1.500 750 2.000
960 2.380 1.450 3.750
1005063000 1005152000 1005076000 1005203000
102,0 254,0 110,0
108,8 264,0 117,2
5 5 5
15 15 15
1.000 2.500 1.120
1.580 5.680 1.730
1005102000 1005254000 1005110000
127,0
134,2
5
15
1.250
2.000
1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
51,0 25,0 63,0
57,4 31,4 70,0
5 5 5
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
15 15 15
500 250 630
code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
203,0
211,4
5
15
2.000
3.750
1005203000
254,0
264,0
5
15
2.500
5.680
1005254000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
06/01/2015 The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
AIR & WATER HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1103 Air / Water Hose
Ins i de di a . (mm)
25,0 32,0 38,0 Codan
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
Product code
1005025000
38,4
5
15
300
520
1005032000
110344,4 --
5
15
380
610
1005038000
OIL
130
PETROL
148
110,0
117,2
5
POWERSTEERING
164
127,0
134,2
5
PVC
167
152,0
159,2
5
440 700 Type nr. 1103 15 500 790 Application: Air / Water Hose 15 Standard Length: 63040 metres 960 Working Temperature: -15°C to 75°C 15 750 1.450 Inside: NR/SBR 15 Colour: Black 1.000 1.580 Polyester 1.730 15 Reinforcement: 1.120 Outside: NR/EPDM 15 Colour: Red 1.250 2.000 Standards: 15 1.500 2.380
STEAM
179
203,0
211,4
5
15
2.000
3.750
1005203000
WELDING & GAS
182
254,0
264,0
5
15
2.500
5.680
1005254000
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
0
270
MATERIAL HANDLING 120
INDEX
45,0 51,4 5 Flexible, red, ribbed hose made of rubber. Ideal 51,0 57,4 5 for water. Used especially to replace PVC garden hoses. 63,0 70,0 5 Fits standard connectors. 76,0 82,4 5 Please contact Codan for further information. 102,0 108,8 5
15
1005045000 1005051000 1005063000 1005076000 1005102000 1005110000 1005127000 1005152000
Product code
13,0
20,0
6
18
19,0
26,0
6
18 450 1103019000 complied with. Codan Rubber’s warranty 0 is void in the event of misuse such as excessive bending, crushing, stretching, use
25,0
33,0
6
Please contact Codan Rubber for individual product manufacturing tolerances. 18 0 550
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
1103013000
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification.
1103025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
AIR & WATER HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Codan 1106 Air / Water Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0 Codan 110644,4 - ISO 1307
5
45,0 51,4 5 Cables are mostly unprotected. Extremely flexible 51,0 57,4 5 and resistant to torsion, cable protection hoses 63,0 70,0 protection for 5 flexible are used as a physical electric applications such 76,0 cables in 82,4 5 as robot joints and automatic welding machines. They are 102,0 108,8 5 manufactured with insulating rubber compounds, highly ageingand ozone 110,0 117,2 5 resistant, non-conductive and resisting chemicals and 127,0 oil. 134,2 5 mineral 152,0 159,2 5
15
380
610
1005038000
15
440
700
1005045000
15 Type nr. 1106 500 790 Application: Air / Water Hose 15 Standard Length: 63040 metres 960 -30°C1.450 to 80°C 15 Working Temperature: 750 Inside: SBR 15 Colour: Black 1.000 1.580 Reinforcement: Polyester 15 1.120 1.730 Outside: 15 Colour: Black 1.250 2.000 1307 15 Standards: ISO1.500 2.380
1005051000 1005063000 1005076000 1005102000 1005110000 1005127000 1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0
264,0
5
15
2.500
5.680
1005254000
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
25,0
27,0
-
32,0
34,0
-
38,0
40,0
-
Burs t Pres s ure BAR
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Bend Ra di us (mm)
Wei ght (g/m)
Product code
-
-
110
1106025
-
-
150
1106032
-
-
180
1106038
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
AIR & WATER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1207 Air / Water Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
Codan 1207 - -
OIL
130
76,0
82,4
5
PETROL
148
102,0
108,8
5
POWERSTEERING
164
110,0
117,2
5
PVC
167
127,0
134,2
5
380 610 Type nr. 1207 15 440 700 Application: Air / Water Hose 15 Standard Length: 500- metres 790 -25°C 960 to 80°C 15 Working Temperature: 630 Inside: NBR/PVC 15 Colour: Black 750 1.450 15 Reinforcement: 1.000 1.580 Outside: 15 1.120 1.730 Colour: Black 15 Standards: - 1.250 2.000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
3,0
6,0
-
-
-
35
1207003000
MATERIAL HANDLING 120
STEAM
179
WELDING & GAS
182
INDEX
38,0 44,4 5 Black tubing, mainly used for vacuum 45,0 51,4 5 in engine compartments, also usable for window wash 51,0 on cars57,4 systems (sprinkler sys.) 5 63,0 70,0 5
15
1005038000 1005045000 1005051000 1005063000 1005076000 1005102000 1005110000 1005127000
code
4,0 sheet has been prepared 7,0with great care in order to provide you- with all the information you need. This hose specification
- conditions of an application 45 will affect1207004000 of- vulcanised Rubber Products). The individual the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
5,0
9,5
-
6,0
11,0
-
-
-
55
1207005000
-
-
65
1207011000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
AIR & WATER HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Codan 1208 Air / Water Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
31,4
5
15
250
420
1005025000
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
Codan 120857,4 51,0
5
15
440
700
1005045000
5
15
500
790
1005051000
63,0 costumer 70,0 Special build EPDM hose5for hot water in76,0 the plastic mould 82,4 industry. 5 5
OIL
130
110,0
117,2
5
PETROL
148
127,0
134,2
5
152,0
159,2
5
203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
167
STEAM
179
WELDING & GAS
182
INDEX
Product code
38,4
108,8
PVC
Wei ght (g/m)
25,0
102,0
164
Bend Ra di us (mm)
32,0
MATERIAL HANDLING 120
POWERSTEERING
Burs t Pres s ure BAR
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
19,1
27,0
15 Type nr. 1208 630 960 1005063000 Application: Air / Water Hose 15 750 1.450 1005076000 Standard Length: 30 metres 15 Working Temperature: 1.000 1.580 -30°C to 100°C1005102000 Inside: EPDM 15 1.120 1.730 1005110000 Colour: Black 15 Reinforcement: 1.250 1005127000 Polyester 2.000 15 Outside: EPDM 1.500 2.380 1005152000 Colour: Black 15 Standards: 2.000 3.750 1005203000 15 2.500 5.680 1005254000
20
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
with incorrect media or use in environments outside the hose specification. 60 100 480 Please contact Codan Rubber for individual product manufacturing tolerances.
1208019000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
AIR & WATER HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1220 Air / Water Hose Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1220 - BS5118 Type 2
Extremely sturdy and pliable hose for Type nr. 1220 compressed air and water. Designed for heavyApplication: Air / Water Hose duty work. HighOuts degree Length: metres Wei ght Ins i de i de of resistance Workito ngimpact BursStandard t Bend Ra40 di us and rough surfaces. Ideal for Pres use sin mines, Working -30°C (g/m) to 80°C di a . (mm) di a . (mm) ure BAR Pres s ure BAR Temperature: (mm) quarries, tunnels, shipyards, etc. Inside: SBR/NR 25,0 31,4couplings in diameters 5 15 Colour: Black 250 420 Fits standard claw less than 51 mm. Reinforcement: Polyester 32,0 38,4 5 15 300 520 Please contact Codan for further information. Outside: SBR/NR 38,0 44,4 5 15 Colour: Yellow380 610 45,0 51,4 5 15 Standards: BS5118 440 Type 2 700 51,0
57,4
5
15 15
500
790
Product code
1005025000 1005032000 1005038000 1005045000 1005051000
63,0
70,0
5
630
960
1005063000
76,0 Ins i de
82,4i de Outs
5 ng Worki
15 t Burs
750 Bend Ra di us
1.450 Wei ght
1005076000 Product
di102,0 a . (mm)
di108,8 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 1.000
(g/m) 1.580
code 1005102000
13,0 110,0
24,2 117,2
20 5
60 15
120 1.120
500 1.730
1220013000 1005110000
19,0 127,0
30,6 134,2
20 5
60 15
180 1.250
670 2.000
1220019000 1005127000
25,0 152,0
38,2 159,2
20 5
60 15
250 1.500
930 2.380
1220025000 1005152000
32,0 203,0
46,4 211,4
20 5
60 15
320 2.000
1.300 3.750
1220032000 1005203000
38,0 254,0
52,4 264,0
20 5
60 15
350 2.500
1.490 5.680
1220038000 1005254000
51,0
67,0
20
60
500
2.180
1220051000
63,0
79,0
20
60
600
2.610
1220063000
76,0
92,8
20
60 900 3.100 1220076000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
90,0
108,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse 4.700 such as excessive bending, crushing, stretching, use 60 1.050 1220090000
102,0
122,8
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
1.150
5.190
1220102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
AIR & WATER HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Codan 1222 Air / Water Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
31,4
5
15
250
420
1005025000
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
Codan 122257,4 -51,0
5
15
440
700
1005045000
5
15
500
790
1005051000
63,0 70,0 5 Spoolhose for industrial use. Specially designed for paperindustry. 76,0 82,4 5 5
OIL
130
110,0
117,2
5
PETROL
148
127,0
134,2
5
152,0
159,2
5
203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
167
STEAM
179
WELDING & GAS
182
INDEX
Product code
38,4
108,8
PVC
Wei ght (g/m)
25,0
102,0
164
Bend Ra di us (mm)
32,0
MATERIAL HANDLING 120
POWERSTEERING
Burs t Pres s ure BAR
38,2
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
25,4
15 Type nr. 1222 630 960 Application: Air / Water Hose 15 750 1.450 Standard Length: - metres 15 Working Temperature: 1.000 -40°C1.580 to 90°C Inside: Synthetic Rubber 15 1.120 1.730 Colour: Black 15 Reinforcement: 1.250 Polyester 2.000 15 Outside: EPDM 1.500 2.380 Colour: Yellow 15 Standards: - 2.000 3.750 15 2.500 5.680
10
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
with incorrect media or use in environments outside the hose specification. 57 180 670 Please contact Codan Rubber for individual product manufacturing tolerances.
1222025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
AIR & WATER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1225 Air / Water Hose
Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Codan 122538,4 -32,0
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
15
300
520
1005032000
15 Type nr. 1225 380
610
1005038000
5
38,0 water hose 44,4 5 Black for use where a flexible, hardwearing, and ozone-resistant 45,0 weather 51,4 5 hose is required. Peak temp. 160 C. Normally installed 51,0 57,4 5 using hose clamps and possibly a flushing head. 63,0 contact Codan 70,0 for further information. 5 Please
Product code
1005025000
76,0
82,4
5
102,0
108,8
5
110,0
117,2
5
167
127,0
134,2
5
/ Water Hose 700 15 Application: Air440 1005045000 Standard Length: 50 metres 15 500 790 1005051000 Working Temperature: -30°C to 140°C 15 Inside: EPDM 630 960 1005063000 Colour: Black 15 750 1.450 1005076000 Reinforcement: High Strength Synthetic Textile 15 Yarns 1.000 1.580 1005102000 15 Outside: EPDM 1.120 1.730 1005110000 Colour: Black 15 Standards: - 1.250 2.000 1005127000
STEAM
179
152,0
159,2
5
15
1.500
2.380
1005152000
WELDING & GAS
182
203,0
211,4
5
15
2.000
3.750
1005203000
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
INDEX
254,0
Ins i de di a . (mm)
9,5
264,0
Outs i de di a . (mm)
16,5
Worki ng Pres s ure BAR
5
Burs t Pres s ure BAR
15
Bend Ra di us (mm)
2.500
Wei ght (g/m)
5.680
1005254000
20
60
50
230
1225010000
Product code
12,7
21,5
20
of vulcanised Rubber Products). The65 individual conditions of an application the life time of each product. 60 360 will affect1225013000
19,0
27,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 105 450 1225019000 with incorrect media or use in environments outside the hose specification.
25,0
35,0
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
145
800
1225025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
AIR & WATER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1227 Air / Water Hose
Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Codan 122738,4 -32,0
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
15
300
520
1005032000
15 Type nr. 1227 380
610
1005038000
5
38,0 water hose 44,4 5 Green for use where a flexible, hardwearing, and ozone-resistant 45,0 weather 51,4 5 hose is required. Peak temp. 160 C. Normally installed 51,0 57,4 5 using hose clamps and possibly a flushing head. 63,0 contact Codan 70,0 for further information. 5 Please
Product code
1005025000
76,0
82,4
5
102,0
108,8
5
110,0
117,2
5
167
127,0
134,2
5
/ Water Hose 700 15 Application: Air440 1005045000 Standard Length: 50 metres 15 500 790 1005051000 Working Temperature: -30°C to 140°C 15 Inside: EPDM 630 960 1005063000 Colour: Black 15 750 1.450 1005076000 Reinforcement: High Strength Synthetic Textile 15 Yarns 1.000 1.580 1005102000 15 Outside: EPDM 1.120 1.730 1005110000 Colour: Green 15 Standards: - 1.250 2.000 1005127000
STEAM
179
152,0
159,2
5
15
1.500
2.380
1005152000
WELDING & GAS
182
203,0
211,4
5
15
2.000
3.750
1005203000
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
INDEX
254,0
Ins i de di a . (mm)
9,5
264,0
Outs i de di a . (mm)
16,5
Worki ng Pres s ure BAR
5
Burs t Pres s ure BAR
15
Bend Ra di us (mm)
2.500
Wei ght (g/m)
5.680
1005254000
20
60
50
230
1227010000
Product code
12,7
21,5
20
of vulcanised Rubber Products). The65 individual conditions of an application the life time of each product. 60 360 will affect1227013000
19,0
27,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 105 450 1227019000 with incorrect media or use in environments outside the hose specification.
25,0
35,0
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
145
800
1227025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
AIR & WATER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1228 Air / Water Hose
Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Codan 122838,4 -32,0
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
5
15
250
420
1005025000
5
15
300
520
1005032000
38,0water hose44,4 5 Blue for use where a flexible, hardwearing, weather and ozone-resistant hose is 45,0 51,4 5 required. Peak temp. 160 C. Normally installed 51,0 hose clamps 57,4and possibly a 5flushing head. using Please contact Codan 63,0 70,0 for further information. 5 76,0
82,4
5
102,0
108,8
5
110,0
117,2
5
127,0
134,2
5
15 Type nr. 1228 380 610 1005038000 Application: Air / Water Hose 15 440 700 1005045000 Standard Length: 50 metres 15 Working Temperature: 500 790 1005051000 -30°C to 140°C 15 Inside: EPDM 630 960 1005063000 Colour: Black 15 Reinforcement: 750 1.450 1005076000 High Strength Synthetic Textile 15 Yarns 1.000 1.580 1005102000 Outside: EPDM 15 Colour: Blue 1.120 1.730 1005110000 Standards: 15 1.250 2.000 1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
20
60
50
230
1228010000
9,5
16,5
code
12,7
21,5
20
60 65 360 1228013000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
19,0
27,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 105 450 1228019000 with incorrect media or use in environments outside the hose specification.
25,0
38,0
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
145
800
1228025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1229 Air / Water Hose
Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Codan 122938,4 -32,0
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
1005025000
5
15
300
520
1005032000
76,0
82,4
5
102,0
108,8
5
110,0
117,2
5
127,0
134,2
5
179
152,0
159,2
5
15
1.500
2.380
1005152000
182
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de
264,0 Outs i de
5 ng Worki
15 t Burs
2.500 Bend Ra di us
5.680 Wei ght
1005254000 Product
di a . (mm)
di a . (mm)
Pres s ure BAR
Pres s ure BAR
(mm)
(g/m)
20
60
50
230
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM WELDING & GAS
38,0 5 Red water hose 44,4 for use where a flexible, hardwearing, and ozone-resistant 45,0 weather 51,4 5 hose is required. Peak temp. 160 C. Normally installed 51,0 hose clamps 57,4and possibly a 5flushing head. using Please contact Codan 63,0 70,0 for further information. 5
Product code
15 Type nr. 1229 380 610 1005038000 / Water Hose 700 15 Application: Air440 1005045000 Standard Length: 50 metres 15 Working Temperature: 500 -30°C 790 to 140°C1005051000 Inside: EPDM 15 630 960 1005063000 Colour: Black 15 Reinforcement: 750 1.450 1005076000 High Strength Synthetic Textile 15 Yarns 1.000 1.580 1005102000 Outside: EPDM 15 1.120 1.730 1005110000 Colour: Red 15 Standards: - 1.250 2.000 1005127000
MATERIAL HANDLING 120
INDEX
AIR & WATER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
9,5
16,6
code
1229010000
12,7
21,5
20
60 360 will affect1229013000 of vulcanised Rubber Products). The65 individual conditions of an application the life time of each product.
19,0
27,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 105 450 1229019000 with incorrect media or use in environments outside the hose specification.
25,0
35,0
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
145
450
1229025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
AIR & WATER HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Codan 1232 Air / Water Hose
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Codan ISO hose 1403: 1995 Normally 1232 installed- using clamps, Bauer or Stortz fittings, or similar. Please contact Codan for information.water hose for use in all Red,further industrial-quality types of industrial flushing, cleaning, etc. Hardwearing surface that also has excellent weather and ozone resistance. From 32 mm: wrapped hose supplied in 40 m lengths. (old type 1210) Working temp. -30°C to +80°C. BP 3x safety factor. SBR/SBR. Ins i decontactOuts i defor furtherWorki ng Please Codan information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Type nr. 1232 Colour: BlackAir / Water Hose Application: Standards: Standard Length: 50 metres Working Temperature: -30°C to 100°C Inside: EPDM Colour: Black Reinforcement: Polyester BursOutside: t Bend Ra di us Wei ght Product EPDM Pres s ure BAR Red (mm) (g/m) code Colour: Standards: ISO 1403: 1995 15 250 420 1005025000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
32,0
38,4
5
15
300
520
1005032000
182
38,0
44,4
5
15
380
610
1005038000 Product 1005045000
WELDING & GAS INDEX
di a . (mm)
25,0
di a . (mm)
31,4
Pres s ure BAR
5
Ins i de 45,0 di a . (mm)
Outs 51,4i de di a . (mm)
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 440 (mm)
Wei 700ght (g/m)
790 250 960
1005051000 1232013000 1005063000
15,9 76,0 19,1 102,0
23,9 82,4 28,5 108,8
10 5 10 5
30 15 30 15
0 750 0 1.000
300 1.450 500 1.580
1232016000 1005076000 1232019000 1005102000
25,4 110,0 32,0 127,0
34,8 117,2 42,4 134,2
10 5 10 5
30 15 30 15
0 1.120 0 1.250
580 1.730 880 2.000
1232025000 1005110000 1232032000 1005127000
38,0 152,0 45,0 203,0
48,4 159,2 55,4 211,4 61,8 264,0 76,2
30 15 30 15 30 15
0 1.500 0 2.000
51,0 254,0 63,0
10 5 10 5 10 5
1.020 2.380 1.200 3.750 1.360 5.680
1232038000 1005152000 1232045000 1005203000 1232051000 1005254000
10
70,0
83,2
10
76,0
90,4
10
51,0 12,7 63,0
57,4 20,7 70,0
5 10 5
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
15 30 15
500 0 630
code
30
0 2.500 0
2.100
1232063000
30
0
2.360
1232070000
30
0
2.740
1232076000
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
102,0
116,8
10
30
0
3.690
1232102000
127,0
143,0
10
30
0
4.950
1232127000
168,0
10
30
0
5.870
1232152000
152,0 203,0
Coda n Rubber Da nma10 rk A/S Valdemarshaab 225,0 30 1,DK-4600 Køge, Denmark 0 7.120 1232203000 Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark This hose specification sheet has been prepared with great care in order provide individual conditions of an application will affect the life time of each product. Therefore please ensure 56you 64with 65 all 48theMail:Thei nfo@coda Tel . +45 56 64 64 64 Faxto+45 n.com URL: www.coda n.com information you need. Written advice must be obtained from Codan Rubber before using any hose with that resistance to chemicals and cleaning procedures in our written product information is complied with. untested media or before using in applications not covered in the product data sheet. Codan Rubber Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any with incorrect media or use in environments outside the hose specification. physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products). Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
AIR & WATER HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely Codan 1235 Air space-saving. / Water Flexible, Hose
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de 1235 Outs Codan - i-de di a . (mm) di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Wei ght (g/m)
Product code
OIL
130
PETROL
148
51,0
57,4
5
POWERSTEERING
164
63,0
70,0
5
PVC
167
76,0
82,4
5
15 Type nr. 1235 250 420 Application: Air / Water Hose 15 Standard Length: 30050 metres 520 -30°C 610 to 70°C 15 Working Temperature: 380 Inside: SBR/NR 15 Colour: Black 440 700 Reinforcement: Polyester 15 500 790 Outside: NR/EPDM 15 Colour: Black 630 960 15 Standards: - 750 1.450
STEAM
179
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 6,3
211,4 12,5
5 10
15 50
2.000 44
3.750 135
1005203000 1235006000
254,0 8,0
264,0 14,4
5 10
15 50
2.500 56
5.680 165
1005254000 1235008000
MATERIAL HANDLING 120
WELDING & GAS INDEX
182
Black air/water hose for 5industrial 25,0 universal 31,4 use, e.g. in the building and construction, 32,0 38,4 shipbuilding and mining sectors. 5 Please 38,0 contact Codan 44,4 for further information. 5
Bend Ra di us (mm)
45,0
51,4
5
1005025000 1005032000 1005038000 1005045000 1005051000 1005063000 1005076000
code 1005152000
10,0
17,0
10
50
70
215
1235010000
12,5
20,5
10
50
88
300
1235013000
16,0
25,0
10
50 112 420 1235016000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
20,0
30,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 50 140 560 1235019000 with incorrect media or use in environments outside the hose specification.
25,4
35,0
10
50
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
175
1.120
1235025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
AIR & WATER HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1236 Air / Water Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
5
15
500
790
1005051000
Codan 123657,4 51,0
63,0 universal 70,0 Black air/water hose for 5industrial use, e.g. in the building 76,0 82,4 and construction, 5 shipbuilding and mining sectors. Please contact 102,0 for further 108,8 5 Codan information. 110,0 117,2 5 127,0
134,2
5
152,0
159,2
5
203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Rubber Products). Bend Ra diconditions us of an application Wei ght Product of vulcanised The individual will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is Pres scomplied ure BAR (mm) (g/m) code with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
19,0
29,0
15 Type nr. 1236 630 960 1005063000 / Water Hose1.450 15 Application: Air750 1005076000 Standard Length: 40 metres 15 Working Temperature: 1.000 -25°C1.580 to 70°C 1005102000 Inside: SBR 15 1.120 1.730 1005110000 Colour: Black 15 Reinforcement: 1.250 2.000 1005127000 High strength synthetic tectile copper wire.2.380 15 yarns. Antistatic 1.500 1005152000 Outside: SBR 15 2.000 3.750 1005203000 Colour: Black 15 Standards: 2.500 5.680 1005254000
20
with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
60
180
630
1236019000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
AIR & WATER HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1240 Air / Water Hose Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1240 - -
Yellow, steel-reinforced, sturdy compressed-air Type nr. 1240 hose. High resistance to compression, yet highly Application: Air / Water Hose flexible. Resistant to oil spray and water Standard Length: 40 metres temperatures up to i90°C. Temperature: to 90°C Ins i de Outs de Worki ng BursWorking t Bend Ra di us -30°CWei ght Product For on building sites andPres oil rigs Inside: di a . use (mm) di a . (mm) s urewhere BAR great Pres s ure BAR NBR (mm) (g/m) code demands are made on the hose with regard to Colour: Black both pressure. Crimp-on Spiralised steel 25,0suction and 31,4 5 fittings are 15 Reinforcement: 250 420wires 1005025000 recommended for this hose type. Outside: NR 32,0 38,4 5 15 300 520 1005032000 Please contact Codan for further information. Colour: Yellow 38,0 44,4 5 15 Standards: - 380 610 1005038000 45,0
51,4
5
15
440
700
1005045000
51,0
57,4
5
15
500
790
1005051000
63,0 Ins i de di76,0 a . (mm)
70,0i de Outs di82,4 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
630 Bend Ra di us (mm) 750
960ght Wei (g/m) 1.450
code 1005076000
102,0 13,0 110,0 19,0
108,8 25,0 117,2 31,0
5 40 5 40
15 185 15 139
1.000 91 1.120 133
1.580 590 1.730 790
1005102000 1240013000 1005110000 1240019000
127,0 25,0 152,0 32,0
134,2 38,0 159,2 47,0
5 40 5 40
15 168 15 173
1.250 175 1.500 224
2.000 1.000 2.380 1.570
1005127000 1240025000 1005152000 1240032000
203,0 38,0 254,0 51,0
211,4 56,0 264,0 67,0
5 40 5 40
15 281 15 222
2.000 266 2.500 357
3.750 1.990 5.680 2.480
1005203000 1240038000 1005254000 1240051000
63,0
82,0
40
173
441
3.330
1240063000
76,0
94,0
35
147
532
3.910
1240076000
102,0
126,0
28
110 714 6.350will affect1240102000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
127,0
152,0
24
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 90 889 7.790 1240127000 with incorrect media or use in environments outside the hose specification.
152,0
177,0
24
77
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
1005063000 Product
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
1.064
9.180
1240152000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
AIR & WATER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1255 Air / Water Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
25,0
31,4
5
15
250
420
1005025000
COOLANT
77
32,0
38,4
5
15
300
520
1005032000
FOOD
87
38,0 Codan 125544,4 --
5
15
380
610
1005038000
GAS
99
HYDRAULIC
110
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Wei ght (g/m)
Product code
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
152,0
159,2
5
440 700 1005045000 Type nr. 1255 500 790 1005051000 Application: Air / Water Hose 15 Standard Length: 63040 metres 960 1005063000 Working Temperature: -25°C to 100°C 15 750 1.450 1005076000 Inside: Synthetic Rubber 15 Colour: Black 1.000 1.580 1005102000 Reinforcement: Synthetic textile 15 1.120 1.730 1005110000 Outside: Ceramic, glass, nomex 15 Colour: White1.250 2.000 1005127000 15 Standards: - 1.500 2.380 1005152000
STEAM
179
203,0
211,4
5
15
2.000
3.750
1005203000
WELDING & GAS
182
254,0
264,0
5
15
2.500
5.680
1005254000
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
MATERIAL HANDLING 120
INDEX
45,0 51,4 5 Mandrel built premium quality hose designed as 51,0 57,4 5 a water and air transfer coolant hose in melting 63,0 at steel70,0 furnaces - works, foundries5 and those envoirenments of high temperatures 76,0 82,4 5 and possible contacts with red a temporary radiation 102,0 5 different temperature of 108,8 400C. Available with fiber covers (Ceramic, glass, nomex...) 110,0 117,2 5 and non conductive quality rubber of electrical 127,0 5 resistance over134,2 10^10 Ohm/m.
Bend Ra di us (mm)
15
15
Product code
40,0
59,0
10
40 0 0 1255040000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
48,0
63,0
10
40 1255048000 complied with. Codan Rubber’s warranty 0 is void in the event of misuse such 0 as excessive bending, crushing, stretching, use
65,0
85,0
10
Please contact Codan Rubber for individual product manufacturing tolerances. 40 0 0
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification.
1255065000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
AIR & WATER HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2001 Air / Water Hose Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan Codan 2001 - for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Black, wrapped, flexible, industrial Type nr. 2001 Standards: suction/pressure hose for air or water, with Application: Air / Water Hose reinforcing steel helix. For use throughout Standard Length: 40 metres industry, especially the building and Working Temperature: -30°C to 80°C construction sector, shipyards, etc. Inside: SBR Suitable with Black Ins i de for use Outs i deDIN clamps. Worki ng BursColour: t Bend Ra di us Wei ght Product Max. vacuum:di 90%. Reinforcement: Polyester with steel helix code di a . (mm) a . (mm) Pres s ure BAR Pres s ure BAR (mm) (g/m) Please contact Codan for further information. Outside: SBR 25,0 31,4 5 15 Colour: Black 250 420 1005025000 Standards: 32,0 38,4 5 15 300 520 1005032000 38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 500 (mm)
Wei 790ght (g/m)
960
1005063000
Ins i de 51,0 di a . (mm)
63,0
Outs 57,4i de di a . (mm)
70,0
5
15
630
Product 1005051000 code
25,0 76,0
35,0 82,4
10 5
30 15
150 750
870 1.450
2001025000 1005076000
32,0 102,0
42,0 108,8
10 5
30 15
180 1.000
1.080 1.580
2001032000 1005102000
38,0 110,0
49,2 117,2
10 5
30 15
220 1.120
1.360 1.730
2001038000 1005110000
51,0 127,0
62,0 134,2
10 5
30 15
310 1.250
1.830 2.000
2001051000 1005127000
63,0 152,0
75,0 159,2
10 5
30 15
380 1.500
2.600 2.380
2001063000 1005152000
76,0 203,0
88,8 211,4
10 5
30 15
460 2.000
3.090 3.750
2001076000 1005203000
90,0 254,0
104,0 264,0
10 5
30 15
535 2.500
3.940 5.680
2001090000 1005254000
102,0
117,2
10
30
620
4.990
2001102000
127,0
143,4
10
30
880
7.440
2001127000
152,0
168,8
10
30
1.000
9.720
2001152000
203,0
223,4
10
30
1.200
13.900
2001203000
254,0
280,4
10
30
1.750
16.550
2001254000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015 This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
AIR & WATER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2007 Air / Water Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
Codan 2007 - ISO 188/ISO 2398 Black 38,0 compressed-air 44,4 hose for pneumatic 5 equipment, tools, compressors, etc. 45,0 51,4 5 Also suitable for water. Fits standard claw 51,0 57,4couplings used5in the building sector. 63,0 70,0 5 Please contact Codan for further information. 76,0 82,4 5 102,0
108,8
5
110,0
117,2
5
15 Type nr. 2007 380 610 Application: Air / Water Hose 15 Standard Length: 44050 metres 700 -30°C 790 to 80°C 15 Working Temperature: 500 Inside: SBR 15 630 960 Colour: Black Polyester 1.450 15 Reinforcement: 750 Outside: SBR 15 1.000 1.580 Colour: Black 15 Standards: ISO1.120 188/ISO 23981.730
127,0
134,2
5
15
1.250
2.000
1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de di254,0 a . (mm)
211,4 Outs i de di264,0 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
2.000 Bend Ra di us (mm) 2.500
3.750 Wei ght (g/m) 5.680
1005203000 Product
1005038000 1005045000 1005051000 1005063000 1005076000 1005102000 1005110000
code 1005254000
10,0
18,0
20
60
70
300
2007010000
13,0
23,0
20
60
91
450
2007013000
16,0
26,0
20
60 550 will affect2007016000 of vulcanised Rubber Products). The112 individual conditions of an application the life time of each product.
19,0
30,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 133 650 2007019000 with incorrect media or use in environments outside the hose specification.
25,0
36,0
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
175
900
2007025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
AIR & WATER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2116 Air / Water Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
Codan 2116 - -
38,0 44,4 5 Red water hose for use where a flexible, hard45,0 51,4 5 wearing, weather and ozone-resistant hose is 51,0 57,4 5 required. Normally installed 63,0 70,0using hose clamps 5 and possibly a flushing head. 76,0 contact Codan 82,4 for further information. 5 Please 102,0 108,8 5 110,0
117,2
5
127,0
134,2
5
380 610 Type nr. 2116 15 440 700 Application: Air / Water Hose 15 Standard Length: 50050 metres 790 -40°C 960 to 80°C 15 Working Temperature: 630 Inside: EPDM 15 Colour: Black 750 1.450 Polyester 1.580 15 Reinforcement: 1.000 Outside: EPDM 15 1.120 1.730 Colour: Red 15 Standards: - 1.250 2.000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
40
40
270
2116013000
12,7
20,7
15
10
1005038000 1005045000 1005051000 1005063000 1005076000 1005102000 1005110000 1005127000
code
23,9 10with all the information you need. This hose 15,9 specification sheet has been prepared with great care in order to provide you
40 330 will affect2116016000 of vulcanised Rubber Products). The60 individual conditions of an application the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
19,1
28,5
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 40 90 430 2116019000 with incorrect media or use in environments outside the hose specification.
25,4
34,8
10
40
Please contact Codan Rubber for individual product manufacturing tolerances.
120
570
2116025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
AIR & WATER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2118 Air / Water Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
25,0
31,4
5
15
250
420
1005025000
COOLANT
77
32,0
38,4
5
15
300
520
1005032000
FOOD
87
38,0 5 2 Codan 211844,4 - BS5118 Type
15
380
610
1005038000
GAS
99
HYDRAULIC
110
45,0 51,4 5 Extremely sturdy and pliable hose for 51,0 57,4 5 compressed air and water. Smooth cover. 63,0 70,0 Designed for heavy-duty work. High5 degree of resistance to impact and rough surfaces. Ideal 76,0 82,4 5 for use in mines, quarries, tunnels, shipyards, 102,0 108,8 5 diameters etc. Fits standard claw couplings in less than 51 mm. Please contact Codan for 110,0 117,2 5 further information. 127,0 134,2 5
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
159,2
5
440 700 Type nr. 2118 500 790 Application: Air / Water Hose 15 Standard Length: 630- metres 960 Working Temperature: -30°C to 90°C 15 750 1.450 Inside: SBR/NR 15 Colour: Black 1.000 1.580 Reinforcement: Polyester 15 1.120 1.730 Outside: EPDM 15 Colour: Yellow1.250 2.000 15 Standards: BS5118 1.500 Type 2 2.380
Product code
15
1005045000
15
1005051000 1005063000 1005076000 1005102000 1005110000 1005127000
PVC
167
152,0
STEAM
179
203,0
211,4
5
15
2.000
3.750
1005203000
WELDING & GAS
182
254,0
264,0
5
15
2.500
5.680
1005254000
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
INDEX
1005152000
Product code
13,0
20,0
20
64 150 350 2118013000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
20,0
30,0
20
64 230 580 2118019000 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
25,0
36,0
20
Please contact Codan Rubber for individual product manufacturing tolerances. 64 300 750
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification.
2118025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
AIR & WATER HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Codan 3301 Air / Water Hose
Codan 1005 Black, reinforced, layflat water hose. Easy to Type nr. 1005 handle and extremely space-saving. Flexible, Application: Air / Water Hose even when used at low temperatures. Often used Standard Length: 40 metres on building sites for immersion pumps, etc. or Working Temperature: -30°C to 90°C where liquids are carried under pressure. Inside: NR/SBR Codan ISO hose 1403: 1995 Normally 3301 installed- using clamps, Bauer or Colour: Black Stortz fittings, or similar. Please contact Codan Reinforcement: Polyester for further information. Outside: NR/SBR Black universal hose. Suitable for cold and hot Type nr. 3301 Colour: BlackAir / Water Hose water, compressed air and chemicals (acids Application: Standards: excepted). Resistant to acetates and ketones. Standard Length: 50 metres In sizes larger than 32.0 mm diameter, wrapped Working Temperature: -40°C to 100°C hose is supplied in 40 m lengths (1215), working Inside: EPDM pressure and bursting pressure are reduced to Colour: Black 15 bar and 45 bar respectively at working Reinforcement: Polyester Ins i de Outs Worki ng BursOutside: t Bend Ra di us Wei ght Product temperatures of -30i de to +80°C. SBR/SBR. EPDM di a . (mm) a . (mm) Presinformation. s ure BAR Pres s ure BAR Black (mm) (g/m) code Please contactdiCodan for further Colour: Standards: ISO 1403: 1995 25,0 31,4 5 15 250 420 1005025000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
32,0
38,4
5
15
300
520
1005032000
182
38,0
44,4
5
15
380
610
1005038000 Product 1005045000
WELDING & GAS INDEX
Ins i de 45,0 di a . (mm)
Outs 51,4i de di a . (mm)
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 440 (mm)
Wei 700ght (g/m)
790 174 960
1005051000 3301006000 1005063000
7,9 76,0 9,5 102,0
15,9 82,4 17,5 108,8
25 5 25 5
80 15 80 15
50 750 60 1.000
202 1.450 230 1.580
3301008000 1005076000 3301010000 1005102000
12,7 110,0 15,9 127,0
21,5 117,2 24,7 134,2
25 5 25 5
80 15 80 15
65 1.120 75 1.250
320 1.730 386 2.000
3301013000 1005110000 3301016000 1005127000
19,1 152,0 25,4 203,0
30,5 159,2 36,2 211,4
546 2.380 708 3.750
43,6 264,0 50,0
80 15 50 15 45 15
90 1.500 110 2.000
32,0 254,0 38,0
25 5 20 5 15 5 15
45
0 2.500 0
1.000 5.680 1.200
3301019000 1005152000 3301025000 1005203000 3301032000 1005254000 3301038000
51,0
65,4
15
45
0
1.930
3301051000
63,0
78,6
15
45
0
2.550
3301063000
51,0 6,3 63,0
57,4 14,3 70,0
5 25 5
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
15 80 15
500 45 630
code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
76,0
92,0
15
45
0
3.090
3301076000
102,0
118,0
15
45
0
4.040
3301102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
07/01/2015 The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
AIR & WATER HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1005Air - / Water Hose Codan 3304 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3304 - ISO 1403: 1995 Extremely flexible, grey universal hose. Suitable Type nr. 3304 Inscold i de and hot Outs i de compressed Workiair ngand BursApplication: t Bend di us HoseWei ght Product for water, Air /Ra Water di a . (mm) di a . (mm) Pres s ure BAR BAR (mm) code certain chemicals. Resistant to acetates and Pres s ure Standard Length: 50 metres (g/m) ketones. rubber coating ensures -40°C 420 to 100°C1005025000 25,0 The outer 31,4 5 15 Working Temperature: 250 excellent resistance to ozone. For air and water Inside: EPDM 32,0 there are 38,4 5 15 Colour: Black 300 520 1005032000 where high demands on quality. Please contact Codan for further information. Reinforcement: Ester 38,0 44,4 5 15 380 610 1005038000 Outside: EPDM 45,0 51,4 5 15 Colour: Grey 440 700 1005045000 1403: 1995 790 51,0 57,4 5 15 Standards: ISO500 1005051000 63,0
70,0
5
15 15
630
960
1005063000
76,0
82,4
5
750
1.450
1005076000
102,0 Ins i de
108,8 Outs i de
5 ng Worki
15 t Burs
1.000 Bend Ra di us
1.580 Wei ght
1005102000 Product
di a . (mm)
110,0
di a . (mm)
Pres s ure BAR
5
Pres s ure BAR
15
(mm)
1.120
(g/m)
1.730
code 1005110000
6,3 127,0
14,3 134,2
25 5
80 15
50 1.250
179 2.000
3304006000 1005127000
7,9 152,0
15,9 159,2
25 5
80 15
60 1.500
207 2.380
3304008000 1005152000
9,5 203,0
17,5 211,4
25 5
80 15
65 2.000
236 3.750
3304010000 1005203000
12,7 254,0
21,5 264,0
25 5
80 15
75 2.500
330 5.680
3304013000 1005254000
15,9
24,7
25
80
90
397
3304016000
19,1
29,5
25
70
105
560
3304019000
117,2
25,4 36,2 20 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
50 130 724 3304025000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
32,0
41,7
10
40 150 766 3304032000 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
38,1
48,0
10
Please contact Codan Rubber for individual product manufacturing tolerances. 40 170 898
with incorrect media or use in environments outside the hose specification.
3304038000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
AIR & WATER HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3310 Air space-saving. / Water Flexible, Hose handle and extremely
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de 3310 Outs de Codan - iISO di a . (mm) di a . (mm)
Worki ng 1403: 1995
Pres s ure BAR
Burs t Pres s ure BAR
Black, hose for air 25,0 flexible universal 31,4 5 and water. High-quality EPDM inside and outside ensures 32,0weather and 38,4 good ozone resistance5 in any environment. 38,0 44,4 5 For use in industrial applications for cold and 45,0 51,4 5 hot water, compressed air and chemicals (acids excepted). Resistant 51,0 57,4 to acetates and 5 ketones. Please contact Codan for further information. 63,0 70,0 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
76,0
82,4
5
15 Type nr. 3310 250 420 1005025000 Application: Air / Water Hose 15 Standard Length: 30050 metres 520 1005032000 Working Temperature: -40°C to 100°C 15 380 610 1005038000 Inside: EPDM 15 Colour: Black 440 700 1005045000 Ester 15 Reinforcement: 500 790 1005051000 Outside: EPDM 15 Colour: Black 630 960 1005063000 1403: 1995 1.450 15 Standards: ISO750 1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de
134,2 Outs i de
5 ng Worki
15 t Burs
1.250 Bend Ra di us
2.000 Wei ght
1005127000 Product
di152,0 a . (mm)
di159,2 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 1.500
(g/m) 2.380
code 1005152000
6,3 203,0
13,1 211,4
10 5
40 15
40 2.000
142 3.750
3310006000 1005203000
7,9 254,0
14,7 264,0
10 5
40 15
44 2.500
166 5.680
3310008000 1005254000
9,5
16,3
10
40
50
191
3310010000
12,7
19,9
10
40
60
254
3310013000
15,9
23,1
10
40 70 305 3310016000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
19,1
27,1
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 40 80 402 3310019000
25,4
33,6
9
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
33
110
525
3310025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
AIR & WATER HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely Codan 3311 Air space-saving. / Water Flexible, Hose
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de 3311 Outs Codan - i-de di a . (mm) di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Black, hose for air 25,0 flexible universal 31,4 5 and water. High-quality EPDM inside and outside ensures 32,0weather and 38,4 good ozone resistance5 in any environment. 38,0 44,4 5 For use in industrial applications for cold and 45,0 51,4 air and chemicals 5 hot water, compressed (acids excepted). Resistant to acetates and 51,0 57,4 5 ketones. Please contact Codan for further information. 63,0 70,0 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
76,0
82,4
5
15 Type nr. 3311 250 420 1005025000 Application: Air / Water Hose 15 Standard Length: 30050 metres 520 1005032000 -40°C 610 to 100°C1005038000 15 Working Temperature: 380 Inside: EPDM 15 Colour: Black 440 700 1005045000 Reinforcement: Ester 15 500 790 1005051000 Outside: EPDM 15 Colour: Black 630 960 1005063000 15 Standards: - 750 1.450 1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 6,3
211,4 13,1
5 20
15 60
2.000 53
3.750 142
1005203000 3311006000
254,0 8,0
264,0 14,8
5 20
15 60
2.500 60
5.680 169
1005254000 3311008000
code 1005152000
10,0
18,0
20
60
72
242
3311010000
13,0
20,8
20
60
85
286
3311013000
16,0
24,0
20
60 92 350 3311016000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
19,0
27,4
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 100 482 3311019000 with incorrect media or use in environments outside the hose specification.
25,0
33,4
20
50
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
116
539
3311025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 05/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
AIR & WATER HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely Codan 3312 Air space-saving. / Water Flexible, Hose
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de 3312 Outs de Codan - iISO di a . (mm) di a . (mm)
Worki ng 1403: 1995 Pres s ure BAR
Burs t Pres s ure BAR
Grey, 25,0smooth, flexible 31,4 universal hose. 5 For cold or hot water, compressed air and many 32,0 5 chemicals (acids38,4 excepted). Resistant to acetates 38,0 44,4 and ketones. 5 Please contact Codan for further information. 45,0 51,4 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
OIL
130
PETROL
148
51,0
57,4
5
POWERSTEERING
164
63,0
70,0
5
PVC
167
76,0
82,4
5
15 Type nr. 3312 250 420 1005025000 Application: Air / Water Hose 15 Standard Length: 30050 metres 520 1005032000 -40°C 610 to 100°C1005038000 15 Working Temperature: 380 Inside: EPDM 15 Colour: Black 440 700 1005045000 Reinforcement: Ester 15 500 790 1005051000 Outside: EPDM 15 Colour: Grey 630 960 1005063000 1403: 1995 1.450 15 Standards: ISO750 1005076000
STEAM
179
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 6,3
211,4 13,1
5 10
15 40
2.000 40
3.750 143
1005203000 3312006000
254,0 7,9
264,0 14,7
5 10
15 40
2.500 44
5.680 171
1005254000 3312008000
MATERIAL HANDLING 120
WELDING & GAS INDEX
182
code 1005152000
9,5
16,3
10
40
50
197
3312010000
12,7
19,9
10
40
60
261
3312013000
15,9
23,1
10
40 70 314 3312016000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
19,1
27,1
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 40 80 412 3312019000 with incorrect media or use in environments outside the hose specification.
25,4
33,6
9
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
33
110
525
3312025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
AIR CONDITION HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
5034
5035
5036
5038
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
AIR CONDITION HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 5034 Air conditioning
Ins i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
1005025000
32,0 Codan 503438,4 - SAE J 20645A :1993
15
300
520
1005032000
38,0 44,4 5 Black, flexible high-quality hose with exceptional 45,0 51,4 5 inner liner of CIIR rubber which prevents Freon 51,0 from permeating 57,4 5 use in R134a the hose. For mobile and stationary refrigeration 63,0 70,0 5 systems in which R134a is used. 76,0 82,4crimped-on fittings 5 Purpose-approved, are recommended. 102,0 108,8 5 Please contact Codan for further information. 110,0 117,2 5
25,0
Outs i de di a . (mm)
31,4
Product code
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
127,0
134,2
5
380 610 1005038000 Type nr. 5034 440 700 1005045000 Application: Air conditioning 15 Standard Length: 50050 metres 790 1005051000 Working Temperature: -30°C to 120°C 15 630 960 1005063000 Inside: CIIR 15 Colour: Black 750 1.450 1005076000 PVA 15 Reinforcement: 1.000 1.580 1005102000 Outside: CR 15 Colour: Black 1.120 1.730 1005110000 J 2064 A :1993 15 Standards: SAE1.250 2.000 1005127000
STEAM
179
152,0
159,2
5
15
1.500
2.380
1005152000
WELDING & GAS
182
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de
264,0 Outs i de
5 ng Worki
15 t Burs
2.500 Bend Ra di us
5.680 Wei ght
1005254000 Product
di a . (mm)
di a . (mm)
Pres s ure BAR
Pres s ure BAR
(mm)
(g/m)
24
137
70
325
MATERIAL HANDLING 120
INDEX
8,0
18,4
15
15
code
5034008000
10,5 22,4 24 137 90 440 5034010000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
13,0
24,8
24
137 100 515 5034013000 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
16,0
27,8
24
Please contact Codan Rubber for individual product manufacturing tolerances. 137 110 600
with incorrect media or use in environments outside the hose specification.
5034016000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
AIR CONDITION HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 5035 Air conditioning
Ins i de Outs i de di a . (mm) 5035 di a .-(mm) Codan SAE
Worki ng
Pres s ure BAR J 2064-C :1993
Burs t Pres s ure BAR
25,0 flexible high-quality 31,4 5 low Black, hose with permeation(+80C-5kg/m2/year), caused by a thin 32,0 38,4 5 layer of PA build in the hose. insude a high 38,0 EPDM, made 44,4 to mounting 5 qualaty For use in mobile and stationary refrigeration 45,0 51,4 5 systems in which ONLY R134a is used. 51,0 57,4 5 Purpose-approved, crimped-on or reusable 63,0 are recommended. 70,0 5 fittings Also avaliable in reduced dimensions see type 76,0 82,4 5 nr. 5038 102,0 contact 108,8 5 Please Codan for further information.
Bend Ra di us (mm)
15 Type nr. 5035 250
Wei ght (g/m)
420
Product code
1005025000
15 Application: Type 300C - Barrier 520 1005032000 Standard Length: - metres 15 Working Temperature: 380 -40°C 610 to 125°C1005038000 15 Inside: EPDM 440 700 1005045000 Colour: Black 15 500 790 1005051000 Reinforcement: PVA/PET-EPDM-PA 15 Outside: EPDM630 960 1005063000 Colour: Black 15 750 1.450 1005076000 Standards: SAE J 2064-C :1993 15 1.000 1.580 1005102000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
110,0
117,2
5
15
1.120
1.730
1005110000
WELDING & GAS
182
127,0
134,2
5
15
1.250
2.000
1005127000
2.380
1005152000 Product
INDEX
152,0 Ins i de
159,2
5
15
1.500
di203,0 a . (mm)
Outs i de di211,4 a . (mm)
Worki ng Pres s 5 ure BAR
Burs t Pres s15 ure BAR
Bend Ra di us (mm) 2.000
Wei ght (g/m) 3.750
254,0 7,9
264,0 18,3
5 37
15 180
2.500 55
5.680 0
code 1005203000
1005254000 5035008000
10,3
22,4
37
180
65
0
5035010000
12,7
24,6
37
180
75
0
5035013000
15,9
27,7
20
180 0 will affect5035016000 of vulcanised Rubber Products). The90 individual conditions of an application the life time of each product.
22,2
33,3
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 180 135outside the hose specification. 0 5035022000 with incorrect media or use in environments
28,5
39,7
20
180
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
180
0
5035028000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
AIR CONDITION HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 5036 Air conditioning
Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
1005025000
15
300
520
1005032000
15
380
610
1005038000
32,0 5 :1993 Codan 503638,4 - SAE J 2064-E 38,0 44,4 5 Black, hose with 45,0 flexible high-quality 51,4 5 low permeation(+80C-5kg/m2/year), caused by a thin 51,0of PA inside 57,4 5 fittings layer of the hose. Special with O-rings on the hoseinsert has 63,0 70,0 5to be used for this hose. 76,0 82,4 5 For use in mobile and stationary refrigeration systems in which ONLY R134a is used. 102,0 108,8 5 Purpose-approved, crimped-on or reusable 110,0 are recommended. 117,2 5 fittings Please Codan for further information. 127,0 contact 134,2 5
Product code
15 Type nr. 5036 440 700 1005045000 Application: Type E - Veneer 15 Standard Length: 500- metres 790 1005051000 Working Temperature: -40°C to 125°C 15 630 960 1005063000 Inside: PA 15 Colour: 750 1.450 1005076000 PVA/PET 15 Reinforcement: 1.000 1.580 1005102000 Outside: EPDM 15 Colour: Black 1.120 1.730 1005110000 J 2064-E :1993 15 Standards: SAE1.250 2.000 1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de
264,0 Outs i de
5 ng Worki
15 t Burs
2.500 Bend Ra di us
5.680 Wei ght
1005254000 Product
di a . (mm)
di a . (mm)
Pres s ure BAR
Pres s ure BAR
(mm)
(g/m)
37
180
8,1
19,3
65
0
code
5036008000
10,2 23,0 37 180 75 0 5036010000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
13,2
25,4
37
complied with. Codan Rubber’s warranty is void in the event of misuse such 0 as excessive bending, crushing, stretching, use 180 85 5036013000
16,2
28,6
37
180
with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
110
0
5036016000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
Ins i de di a . (mm)
FOOD
87
GAS
99
HYDRAULIC
110
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 5038 Air conditioning
CONTENT
MATERIAL HANDLING 120
AIR CONDITION HOSES
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0 5 :1993 Codan 503831,4 - SAE J 2064-C
15
250
420
32,0 38,4 5 Black, flexible high-quality hose with low 38,0 44,4 5 permeation(+80C-5kg/m2/year), caused by a thin layer in the hose. inside5 a high 45,0of PA build51,4 quality EPDM, made to use standard fittings as 51,0 57,4 5 for SAE J2064 type A. For use in mobile and stationary refrigeration 63,0 70,0 5 systems in which ONLY R134a is used. 76,0 82,4crimped-on or 5 Purpose-approved, reusable fittings are recommended. 102,0 108,8 5 Also avaliable in standard dimensions see type 110,0 117,2 5 nr. 5035 Please Codan for further information. 127,0 contact 134,2 5
15 300 520 1005032000 Type nr. 5038 15 Application: Type 380C - Barrier 610 1005038000 15 Standard Length: 440- metres 700 1005045000 Working Temperature: -40°C to 125°C 15 Inside: EPDM 500 790 1005051000 15 Colour: Black 630 960 1005063000 Reinforcement: PVA/PET-EPDM-PA 15 Outside: EPDM750 1.450 1005076000 Colour: Black 15 1.000 1.580 1005102000 Standards: SAE J 2064-C :1993 15 1.120 1.730 1005110000
1005025000
15
1.250
2.000
1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
37
180
50
0
5038008000
8,2
15,2
code
17,2 180 0 will affect5038010000 of vulcanised Rubber Products). The60 individual conditions of an application the life time of each product. This hose 10,2 specification sheet has been prepared with great care in order to provide 37 you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
13,2
20,8
37
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 180 75 0 5038013000 with incorrect media or use in environments outside the hose specification.
16,0
24,0
37
180
Please contact Codan Rubber for individual product manufacturing tolerances.
90
0
5038016000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
BRAKE HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
4002
4004
4006
4025
4205
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
BRAKE HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 4002 Brake Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
380
610
1005038000
Codan 400244,4 - SAE J 14025A / BSAU 110 38,0 15 A
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
152,0
159,2
5
15 Type nr. 4002 440 700 1005045000 Air -790 Vehicles1005051000 15 Application: Compressed 500 Standard Length: 50 metres 15 Working Temperature: 630 -40°C 960 to 93°C 1005063000 Inside: CR 15 750 1.450 1005076000 Colour: Black 15 Reinforcement: 1.000 1.580 1005102000 Polyester 15 Outside: CR 1.120 1.730 1005110000 Colour: Black 15 1.250 2.000 1005127000 Standards: SAE J 1402 A / BSAU 110 A 15 1.500 2.380 1005152000
STEAM
179
203,0
211,4
5
15
2.000
3.750
1005203000
WELDING & GAS
182
254,0
264,0
5
15
2.500
5.680
1005254000
4002010000
MATERIAL HANDLING 120
INDEX
45,0 smooth, flexible 51,4 hose with outer 5 Black, and inner surfaces rubber. Also 51,0 of oil-resistant 57,4 5 weather and ozone-resistant. 63,0 for use as 70,0 5 between Mainly flexible connection lorries and trailers, but also suitable 76,0 82,4 5 elsewhere on heavy goods vehicles. 102,0 installed 108,8 Normally using specially5designed claw couplings. 110,0 117,2 5 Please contact Codan for further information. 127,0 134,2 5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
90
310
Product code
9,5
19,1
14
63
11,0
21,0
14
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. 63 120 Therefore please ensure that resistance to chemicals and cleaning340 procedures in our 4002011000 written product information is
12,5
22,1
14
with incorrect media or use in environments outside the hose specification. 63 125 370 Please contact Codan Rubber for individual product manufacturing tolerances.
4002013000
14,5
24,1
14
63
4002014000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
130
410
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
06/01/2015
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
BRAKE HOSES Codan 1005 -
Codan Brake Hose Black,4004 reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
Codan 4004 - SAE J 1402 A: 1985 / FMVSS 106
GAS
99
Ins i de Outs i de Worki ng Burs t Bend Ra di us di a . (mm) a . (mm)hose with Pres souter ure BAR BARnr. 4004 (mm) Black, smooth,diflexible and innerPres s ure Type
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
surfaces of oil-resistant rubber. Also weather 25,0 31,4 5 and ozone-resistant. Mainly flexible connection 32,0 for use as 38,4 5 between lorries and trailers, but also suitable elsewhere 5 on38,0 heavy goods 44,4 vehicles. Normally installed using specially 45,0 51,4 5designed couplings. 51,0 contact Codan 57,4 for further information. 5 Please 63,0 70,0 5
Wei ght (g/m)
Product code
Application: Compressed Air - Vehicles 15 Standard Length: 25050 metres 420 1005025000 -40°C 520 to 93°C 1005032000 15 Working Temperature: 300 Inside: NBR 15 Colour: Black 380 610 1005038000 Reinforcement: PET 15 440 700 1005045000 Outside: CR 15 Colour: Black 500 790 1005051000 J 1402 A: 1985960 / FMVSS1005063000 106 15 Standards: SAE630
76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de di127,0 a . (mm)
117,2 Outs i de di134,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.120 Bend Ra di us (mm) 1.250
1.730 Wei ght (g/m) 2.000
1005110000 Product
152,0 4,8
159,2 13,4
5 10
15 62
1.500 70
2.380 172
1005152000 4004005000
203,0 6,3
211,4 15,9
5 10
15 62
2.000 80
3.750 233
1005203000 4004006000
254,0 7,9
264,0 17,5
5 10
15 62
2.500 90
5.680 266
1005254000 4004008000
9,5
19,1
10
62
90
300
4004095000
10,0
20,0
10
62
110
329
4004010000
code 1005127000
11,1
20,7
10
62 115 333 4004011000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
12,7
22,2
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 62 124 362 4004013000 with incorrect media or use in environments outside the hose specification.
15,9
27,0
10
62
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
140
522
4004016000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
BRAKE HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 4006 Brake Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
25,0 Codan 400631,4 - DIN 74310:5 1976
15
250
420
32,0 38,4 5 Black, smooth, flexible hose with outer and inner 38,0 44,4 5 surfaces of oil-resistant rubber. Also weather 45,0 51,4 5 and ozone-resistant. Mainly for use as flexible connection 51,0 57,4 5 between lorries and trailers, but also suitable elsewhere 5 on63,0 heavy goods 70,0 vehicles. Normally installed using specially 76,0 82,4 5designed claw couplings. 102,0 contact 108,8 5 Please Codan for further information.
Product code
1005025000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
110,0
117,2
5
300 520 1005032000 Type nr. 4006 380 610 1005038000 Application: Compressed Air - Vehicles 15 Standard Length: 44050 metres 700 1005045000 Working Temperature: -40°C to 70°C 15 500 790 1005051000 Inside: EPDM 15 Colour: Black 630 960 1005063000 Polyester 1.450 15 Reinforcement: 750 1005076000 Outside: EPDM 15 Colour: Black 1.000 1.580 1005102000 74310: 1976 1.730 15 Standards: DIN 1.120 1005110000
STEAM
179
127,0
134,2
5
15
1.250
2.000
1005127000
WELDING & GAS
182
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de
211,4 Outs i de
5 ng Worki
15 t Burs
2.000 Bend Ra di us
3.750 Wei ght
1005203000 Product
di254,0 a . (mm)
di264,0 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 2.500
(g/m) 5.680
code 1005254000
MATERIAL HANDLING 120
INDEX
15
15
5,0
12,0
10
25
50
134
4006005000
7,0
14,0
10
25
55
166
4006007000
9,0
16,0
10
25 65 198 4006009000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
11,0
18,2
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 50 70 224 4006011000
13,0
25,0
10
Please contact Codan Rubber for individual product manufacturing tolerances. 50 100 468
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification.
4006013000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 4025 Brake Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Codan 402531,4 - UIC 830.1 5 25,0
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
15
250
420
1005025000
102,0
108,8
5
110,0
117,2
5
179
127,0
134,2
5
15
1.250
2.000
1005127000
182
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de
211,4 Outs i de
5 ng Worki
15 t Burs
2.000 Bend Ra di us
3.750 Wei ght
1005203000 Product
di254,0 a . (mm)
di264,0 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 2.500
(g/m) 5.680
code 1005254000
70
0
600
4025012000
70
0
750
4025016000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM WELDING & GAS
32,0 wrapped 38,4 5 made Black, hose with innerlayer special and 38,0 for air with 44,4oilmoisture. Weather 5 ozone-resistant cover. Hose for use in air brake 45,0 on trians. 51,4 5 systems Complies UIC 830.1. Normally installed using specially 51,0 57,4 5designed claw couplings. 63,0 contact Codan 70,0 for further information. 5 Please 76,0 82,4 5
Product code
15 Type nr. 4025 300 520 1005032000 Air -610 Railway1005038000 15 Application: Compressed 380 Standard Length: 40 metres 15 Working Temperature: 440 -30°C 700 to 70°C 1005045000 Inside: NR 15 500 790 1005051000 Colour: Black 15 Reinforcement: 630 960 1005063000 High Tensile SyntheticTextile 15 Yarns 750 1.450 1005076000 Outside: CR 15 Colour: Black 1.000 1.580 1005102000 830.1 15 Standards: UIC1.120 1.730 1005110000
MATERIAL HANDLING 120
INDEX
BRAKE HOSES
12,0
26,0
10
16,0
30,0
10
19,0 33,0 10 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
70 0 850 4025019000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
22,0
36,0
10
complied with. Codan Rubber’s warranty 0 is void in the event of misuse 1.000 such as excessive bending, crushing, stretching, use 70 4025022000 with incorrect media or use in environments outside the hose specification.
28,0
47,0
10
70
Please contact Codan Rubber for individual product manufacturing tolerances.
0
1.250
4025028000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
BRAKE HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 4205 Brake Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
15
250
420
25,0
31,4
5
32,0
38,4
5
Codan 420544,4 - SAE J 14035 38,0
1005025000
15
300
520
1005032000
15
380
610
1005038000
OIL
130
76,0
82,4
5
PETROL
148
102,0
108,8
5
110,0
117,2
5
127,0
134,2
5
152,0
159,2
5
15 Type nr. 4205 440 700 1005045000 Application: Vacuum Brake Hose Vehicles 15 500 790 1005051000 Standard Length: 50 metres 15 Working Temperature: 630 960 1005063000 -40°C to 125°C 15 Inside: CR 750 1.450 1005076000 Colour: Black 15 Reinforcement: 1.000 1.580 High Strength Rayon 1005102000 15 Reinforcement1.120 1.730 1005110000 Outside: CR 15 Colour: Black 1.250 2.000 1005127000 Standards: SAE J 1403 15 1.500 2.380 1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0
264,0
5
15
2.500
5.680
1005254000
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
MATERIAL HANDLING 120
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
45,0to transmit51,4 Hose manifold vacuum5in automotive applications. Resistant to oil, petrol, 51,0 57,4 5 heat and weather. 80% Vacuum. 63,0 70,0 5
Product code
Product code
9,5
17,5
10
40 30 252 4205010000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
12,7
20,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 40 40 299 4205013000
15,9
23,9
10
40
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
60
350
4205016000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 05/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
BREATHING HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
8002
8520
8003
8522
8004
8525
8007
Corrugated breathing hose
8008
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
8502
8503
8504
INDEX
8505
8512
8516
8519
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
Codan 8002 Breathing Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
38,0
44,4
5
15
380
610
1005038000
COOLANT
77
45,0
51,4
5
15
440
700
1005045000
FOOD
87
Codan 800257,4 - EN ISO 5359 51,0 5
15
500
790
1005051000
GAS
99
63,0 70,0 5 White PVC hose made for medical gases. 76,0 82,4 5 Normally installed using hose clamps on stainless fittings. 102,0 or brass 108,8 5 Please contact Codan for further information. 110,0acc. to ISO117,2 5 Sizes 1307.
15 630 960 Type nr. 8002 15 Application: Breathing 750 1.450 Hose 30 metres 1.580 15 Standard Length: 1.000 Working Temperature: -10°C to 60°C 15 Inside: PVC 1.120 1.730 15 Colour: Transparent 1.250 2.000 Reinforcement: PES 15 Outside: PVC 1.500 2.380 Colour: White 15 2.000 3.750 Standards: EN ISO 5359 15 2.500 5.680
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
127,0
134,2
5
152,0
159,2
5
203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
12,4
10
1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Pres s ure Bend Ra di us Wei ght Product of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. BAR please ensure that resistance(mm) (g/m)in our written productcode Therefore to chemicals and cleaning procedures information is
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,3
1005063000 1005076000
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
45
40
130
8002006
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
Codan 8003 Breathing Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
Codan 800357,4 - EN ISO 5359 51,0 5 63,0 70,0 5 Blue PVC hose made for medical gases. Normally 76,0 82,4 clamps on stainless 5 installed using hose or brass 102,0fittings. Please 108,8 contact Codan 5 for further information. Sizes acc. to ISO 1307. 110,0 117,2 5 127,0
134,2
5
152,0
159,2
5
164
203,0
211,4
5
PVC
167
254,0
264,0
5
STEAM
179
WELDING & GAS
182
INDEX
Burs t Pres s ure BAR
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
12,4
10
440
700
1005045000
500
790
1005051000
15
630 960 Type nr. 8003 15 Application: Anaesthetics 750 1.450 30/20 metres 15 Standard Length: 1.000 1.580 Working Temperature: -10°C to 60°C 15 Inside: PVC 1.120 1.730 Colour: Clear 15 1.250 2.000 Reinforcement: PES 15 Outside: PVC 1.500 2.380 Colour: Blue 15 2.000 3.750 Standards: EN ISO 5359 15 2.500 5.680
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Pres s ure Bend Ra di us Wei ght Product of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. BAR (mm) (g/m) code Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,3
15 15
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
45
40
130
8003006
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 8004 Breathing Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
Codan 800457,4 - EN ISO 5359 51,0 5 63,0 70,0for medical gases. 5 Normally Red PVC hose made installed using hose clamps on stainless or 76,0 82,4 5 brass fittings. 102,0 contact 108,8 5 Please Codan for further information. Sizes acc. to ISO 1307. 110,0 117,2 5 127,0
134,2
5
152,0
159,2
5
203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
12,4
10
440
700
1005045000
500
790
1005051000
15 Type nr. 8004 630 960 Application: Breathing Hose 15 750 1.450 Standard Length: 30 metres 15 Working Temperature: 1.000 -10°C1.580 to 60°C Inside: PVC 15 1.120 1.730 Colour: Transparent 15 Reinforcement: 1.250 2.000 PES 15 Outside: PVC 1.500 2.380 Colour: Red 15 Standards: EN2.000 3.750 ISO 5359 15 2.500 5.680
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Pres s ure Bend Ra di us Wei ght Product BAR (mm) (g/m) code of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,3
15 15
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
45
40
130
8004006
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 8007 Breathing Hose Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
Product code
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
15
500
790
1005051000
15 Type nr. 8007 630
960
1005063000
Codan 800757,4 - EN ISO 5359 51,0 5 63,0 PVC hose70,0 Yellow made for medical 5gases. Normally installed 76,0 82,4using hose clamps 5 on stainless or brass fittings. Please contact Codan 102,0 108,8 Sizes acc. to 5 ISO 1307. for further information. 110,0 117,2 5 127,0
134,2
5
152,0
159,2
5
203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
12,4
10
15 Application: Anaesthetics 750 1.450 Standard Length: 50 metres 15 Working Temperature: 1.000 -10°C1.580 to 60°C 15 Inside: PVC 1.120 1.730 Colour: Clear 15 1.250 2.000 Reinforcement: PES 15 Outside: PVC 1.500 2.380 Colour: Yellow 15 2.000 3.750 Standards: EN ISO 5359 15 2.500 5.680
1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product vulcanised Rubber Products). The (mm) individual conditions of an application will affect the life timecode of each product. Pres sofure BAR (g/m)
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,3
1005076000
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
45
40
130
800700600
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 05/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
Codan 8008 Breathing Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
38,0
44,4
5
15
380
610
1005038000
COOLANT
77
45,0
51,4
5
15
440
700
1005045000
FOOD
87
51,0 5 Codan 800857,4 - EN ISO 5359
15
500
790
1005051000
GAS
99
63,0 70,0 5 Green PVC hose made for medical gases. 76,0 82,4 5 Normally installed using hose clamps on stainless fittings. 102,0 or brass 108,8 5 Please contact Codan for further information. 110,0 117,2 5 Sizes acc. to ISO 1307. 127,0 134,2 5
15 630 960 Type nr. 8008 15 Application: Anaesthetics 750 1.450 30/20 metres 15 Standard Length: 1.000 1.580 Working Temperature: -10°C to 60°C 15 Inside: PVC 1.120 1.730 15 Colour: Clear 1.250 2.000 Reinforcement: PES 15 Outside: PVC 1.500 2.380 15 Colour: Green2.000 3.750 Standards: EN ISO 5359 15 2.500 5.680
HYDRAULIC
110
MATERIAL HANDLING 120
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
OIL
130
PETROL
148
152,0
159,2
5
POWERSTEERING
164
203,0
211,4
5
PVC
167
254,0
264,0
5
STEAM
179
WELDING & GAS
182
INDEX
Product code
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
12,4
10
1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Pres sTherefore ure BAR (mm) (g/m)in our written product code please ensure that resistance to chemicals and cleaning procedures information is
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,3
1005063000 1005076000
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
45
40
130
800800600
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 8502 Breathing Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
Codan 850257,4 - EN 739: 1998 51,0 5 63,0 PVC pressure 70,0supply hose for5 medical Black gases. 76,0 82,4 5 Mainly for use in anaesthetics as flexible 102,0 108,8 5 connection between anaesthetic equipment and wall supply points. 110,0 117,2 5 Normally installed using hose clamps on 127,0 or brass 134,2 5 stainless fittings. Please Codan for further information. 152,0 contact 159,2 5 203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
13,4
440
700
1005045000
500
790
1005051000
15 Type nr. 8502 630 960 Application: Anaesthetics 15 750 1.450 Standard Length: 30 metres 15 Working Temperature: 1.000 -10°C1.580 to 60°C Inside: PVC 15 1.120 1.730 Colour: Black 15 Reinforcement: 1.250 2.000 PES 15 Outside: PVC 1.500 2.380 Colour: Black 15 Standards: EN2.000 3.750 739: 1998 15 2.500 5.680
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,4
15 15
10
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
with incorrect media or use in environments 45 40outside the hose specification.130 Please contact Codan Rubber for individual product manufacturing tolerances.
8502006000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 8503 Breathing Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
15
500
790
1005051000
Codan 850357,4 - EN 739: 1998 51,0 5 63,0PVC pressure 70,0 Blue supply hose for 5medical gases. 76,0 82,4 5 Mainly for use in anaesthetics as flexible 102,0 108,8anaesthetic equipment 5 connection between and wall supply points. 110,0 117,2 5 Normally installed using hose clamps on 127,0 or brass 134,2 5 stainless fittings. Please Codan for further information. 152,0 contact 159,2 5 203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
15 Type nr. 8503 630 960 15 Application: Anaesthetics 750 1.450 Standard Length: 30 metres 15 Working Temperature: 1.000 -10°C1.580 to 60°C Inside: PVC 15 1.120 1.730 Colour: Black 15 Reinforcement: 1.250 2.000 PES 15 Outside: PVC 1.500 2.380 Colour: Blue 15 2.000 3.750 Standards: EN 739: 1998 15 2.500 5.680
13,4
1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,4
1005063000 1005076000
10
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
45
40
130
8503006000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 8504 Breathing Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
15
500
790
1005051000
Codan 850457,4 - EN 739: 1998 51,0 5 63,0 PVC pressure 70,0 supply hose for 5 medical Yellow gases. 76,0 82,4 5 Mainly for use in anaesthetics as flexible 102,0 108,8anaesthetic equipment 5 connection between and wall supply points. 110,0 117,2 5 Normally installed using hose clamps on 127,0 or brass 134,2 5 stainless fittings. Please Codan for further information. 152,0 contact 159,2 5 203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
15 Type nr. 8504 630 960 15 Application: Anaesthetics 750 1.450 Standard Length: 30 metres 15 Working Temperature: 1.000 -10°C1.580 to 60°C Inside: PVC 15 1.120 1.730 Colour: Black 15 Reinforcement: 1.250 2.000 PES 15 Outside: PVC 1.500 2.380 Colour: Yellow 15 2.000 3.750 Standards: EN 739: 1998 15 2.500 5.680
13,4
1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,4
1005063000 1005076000
10
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
45
40
130
8504006000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 8505 Breathing Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
Codan 850557,4 - EN 739: 1998 51,0 5 63,0 70,0 5 White PVC pressure supply hose for medical 76,0 82,4 5 gases. Mainly for use in anaesthetics as flexible 102,0 108,8 5 connection between anaesthetic equipment and 110,0 117,2 5 wall supply points. Normally installed using hose clamps 127,0 134,2 5 on stainless or brass fittings. 152,0 contact 159,2 5 Please Codan for further information. 203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
13,4
440
700
1005045000
500
790
1005051000
15
630 960 Type nr. 8505 15 Application: Anaesthetics 750 1.450 Standard Length: 30 metres 15 1.000 1.580 Working Temperature: -10°C to 60°C 15 Inside: PVC 1.120 1.730 Colour: Black 15 1.250 2.000 Reinforcement: PES 15 Outside: PVC 1.500 2.380 Colour: White 15 2.000 3.750 Standards: EN 739: 1998 15 2.500 5.680
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Pres sofTherefore ure BAR (mm) (g/m) code please ensure that resistance to chemicals and cleaning procedures in our written product information is
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,4
15 15
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. 45 40product manufacturing tolerances. 130 Please contact Codan Rubber for individual
8505006000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 8512 Breathing Hose Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
Product code
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
Codan 851257,4 - EN 14593 /5 EN 14594 (EN139) 51,0 15 63,0 black antistatic 70,0 Flexible, hose with5one laminated yellow stripe in accordance 76,0 82,4 5 with EN 14593/EN 14594. Available in other colours to 102,0 108,8 5 order. For carrying breathing air at high pressure 110,0 117,2 5 resistance from compressor to filter. Good ozone and external resistance to several chemicals. 127,0 134,2 5 Ideal for use when cleaning tanks, etc. or where 152,0 159,2 5 the outer surface of the hose is exposed to adverse 203,0 conditions. 211,4Installed using5 brass or stainless crimped-on fittings. Choice of 254,0 264,0 5 connector should be considered carefully because of the pull off force test in the standard. Also according to EN 139: 1994. Please contact Codan for further information. This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
500
790
1005051000
15 Type nr. 8512 630
960
1005063000
Air 1.450 15 Application: Compressed 750 1005076000 Standard Length: 50 metres 15 1.000 1.580 1005102000 Working Temperature: -35°C to 120°C 15 Inside: EPDM 1.120 1.730 1005110000 Colour: Black 15 1.250 2.000 1005127000 Reinforcement: PVA 15 Outside: EPDM 1.500 2.380 1005152000 15 Colour: Black 2.000 3.750 1005203000 Standards: EN 14593 / EN 14594 (EN139) 15 2.500 5.680 1005254000
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
BREATHING HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 8516 Breathing Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Codan 8516 - EN 14593 / EN 14594 (EN139) 25,0 31,4 5 Flexible, hose with5one 32,0 black antistatic 38,4 laminated green stripe in accordance with 44,4 Available in other 5 EN38,0 14593/EN 14594. colours to45,0 order. For carrying breathing air at high 51,4 5 pressure from compressor to filter. Good ozone 51,0 57,4 5 resistance and external resistance to several chemicals. Ideal70,0 for use when cleaning tanks, 63,0 5 etc. or where the outer surface of the hose is 76,0 to adverse 82,4conditions. Installed 5 exposed using brass crimped-on fittings. 102,0or stainless 108,8 5 Choice of connector should be considered carefully. Also 110,0 5 according to EN117,2 139: 1994. Please contact Codan for further information. 127,0 134,2 5
15
Bend Ra di us (mm)
Wei ght (g/m)
250
420
Product code
1005025000
15 Type nr. 8516 300 520 1005032000 Application: Compressed Air 15 Standard Length: 38050 metres 610 1005038000 Working Temperature: -30°C to 100°C 15 440 700 1005045000 Inside: NBR 15 Colour: Black 500 790 1005051000 PVA 15 Reinforcement: 630 960 1005063000 Outside: NBR/PVC 15 Colour: Black 750 1.450 1005076000 14593 / EN 14594 15 Standards: EN1.000 1.580(EN139) 1005102000 15
1.120
1.730
1005110000
15
1.250
2.000
1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de
264,0 Outs i de
5 ng Worki
15 t Burs
2.500 Bend Ra di us
5.680 Wei ght
1005254000 Product
di a . (mm)
di a . (mm)
Pres s ure BAR
Pres s ure BAR
(mm)
(g/m)
10
60
62
192
6,3
15,3
code
8516006000
7,0
16,4
10
60 66 218 8516007000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
9,5
19,5
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 78 287 8516010000 with incorrect media or use in environments outside the hose specification.
19,1
29,5
10
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
110
521
8516019000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 8519 Breathing Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
Codan 8519 - To Customer Spec. 51,0improved, 57,4 5 New, black, flexible lightweight hose. Inner liner with vanilla aroma (available without 63,0 70,0 5 vanilla to order). For use as a flexible air hose 76,0 82,4 5 on pressure cylinders, e.g. for fire brigade smoke helmets. 102,0 108,8 5 Conforms to DIN 58648: 1989 concerning 110,0 117,2 5 lightweight hoses. Crimped-on fittings 127,0 134,2must always be5 used (without crimped-on fittings, the requirements of 152,0 5 EN 139 apply). 159,2 Please contact Codan for further information. 203,0 211,4 5
15 Type nr. 8519 500 790 Application: Compressed Air 15 630 960 Standard Length: 50 metres 15 Working Temperature: 750 1.450 -40°C to 70°C 15 Inside: NBR 1.000 1.580 Colour: Black 15 Reinforcement: 1.120 1.730 PVA 15 Outside: NBR/PVC 1.250 2.000 Colour: Black 15 Standards: To1.500 Customer Spec.2.380 15 2.000 3.750
254,0
264,0
5
15
2.500
5.680
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
1005045000 1005051000 1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000 Product code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
7,0
13,9
18
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 100 55 171 8519070000
7,4
14,6
18
Please contact Codan Rubber for individual product manufacturing tolerances. 100 60 172
with incorrect media or use in environments outside the hose specification.
8519074000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
Codan 8520 Breathing Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
31,4
5
15
250
420
1005025000
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
77
FOOD
87
Codan 852057,4 - EN ISO 5359 51,0 5
GAS
99
63,0 breathing 70,0oxygen Medical
HYDRAULIC
110
5
76,0
82,4
5
MATERIAL HANDLING 120
102,0
108,8
5
OIL
130
110,0
117,2
5
PETROL
148
127,0
134,2
5
152,0
159,2
5
203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
167
STEAM
179
WELDING & GAS
182
INDEX
Product code
38,4
COOLANT
PVC
Wei ght (g/m)
25,0
65
164
Bend Ra di us (mm)
32,0
CHEMICAL
POWERSTEERING
Burs t Pres s ure BAR
11,0
440
700
1005045000
500
790
1005051000
15 Type nr. 8520 630 960 Application: Anaesthetics 15 750 1.450 Standard Length: - metres 15 Working Temperature: 1.000 -10°C1.580 to 60°C Inside: PVC 15 1.120 1.730 Colour: 15 Reinforcement: 1.250 2.000 PES 15 Outside: PVC 1.500 2.380 Colour: White 15 Standards: EN2.000 3.750 ISO 5359 15 2.500 5.680
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,0
15 15
10
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
with incorrect media or use in environments 40 0 outside the hose specification. 0 Please contact Codan Rubber for individual product manufacturing tolerances.
8520006000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Codan 8522 Breathing Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0 Codan 852244,4 --
5
45,0 51,4 5 Black antistatic hose for anaesthetics 51,0 57,4 5 use with faintly visible cord pattern. 63,0inner and outer 70,0 compound is 5prescribed Both and confirmed by Dräger. 76,0 82,4 5
15
380
610
1005038000
15
440
700
1005045000
OIL
130
102,0
108,8
5
PETROL
148
110,0
117,2
5
POWERSTEERING
164
127,0
134,2
5
PVC
167
152,0
159,2
5
15 Type nr. 8522 500 790 Application: Anaesthetics 15 Standard Length: 630- metres 960 -30°C1.450 to 60°C 15 Working Temperature: 750 Inside: Antistatic CR 15 Colour: Black 1.000 1.580 Reinforcement: PVA 15 1.120 1.730 Outside: Antistatic CR 15 Colour: Black 1.250 2.000 15 Standards: - 1.500 2.380
STEAM
179
203,0
211,4
5
15
2.000
3.750
1005203000
254,0
264,0
5
15
2.500
5.680
1005254000
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
MATERIAL HANDLING 120
WELDING & GAS INDEX
182
1005051000 1005063000 1005076000 1005102000 1005110000 1005127000 1005152000
Product code
6,3
12,7
20
88 130 will affect the life8522063 of vulcanised Rubber Products). The50 individual conditions of an application time of each product.
6,7
12,7
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 88 50 124 8522067000 with incorrect media or use in environments outside the hose specification.
7,0
14,0
20
88
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
50
157
8522007000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
BREATHING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 8525 Breathing Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
Codan 852557,4 - EN ISO 5359 / EN739 51,0 5 63,0 PVC antistatic 70,0 pressure supply 5 hose for White medical gases. Mainly for use as flexible 76,0 82,4 5 connection between equipment and wall supply 102,0 108,8 5 points. DEHP Free. Braided hose reinforced with polyester Inner layer with semi110,0 yarns.117,2 5 conductive compound, volumetric resistivity 127,0 134,2 5 <10^3.cm. Excelent resistance to static electricity. Please contact Codan for 152,0 159,2 5 further information. 203,0 211,4 5 254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
12,7
440
700
1005045000
500
790
1005051000
15 Type nr. 8525 630 960 1005063000 Application: Anaesthetics 15 750 1.450 1005076000 Standard Length: 20/50/100 metres 15 Working Temperature: 1.000 1.580 -10°C to 40°C 1005102000 Inside: Semi-Conductive compound 15 1.120 1.730 1005110000 Colour: Black 15 Reinforcement: 1.250 1005127000 Polyester 2.000 free2.380 of Phtalates 15 Outside: TPE Compound 1.500 1005152000 Colour: White with black stripes 15 Standards: EN2.000 3.750 1005203000 ISO 5359 / EN739 15 2.500 5.680 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,7
15 15
20
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
with incorrect media or use in environments 60 40outside the hose specification.120 Please contact Codan Rubber for individual product manufacturing tolerances.
8525006000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information. CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan Corrugated breathing hose Breathing Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
Codan Corrugated breathing hose - EN1512342:1998 + A1:2009 EU Dir 51,0 57,4 5 500 790 1005051000 93/42/EEC amended 2007/47/EC Class IIa SMD 63,0 70,0 5 15 630 960 1005063000 76,0 flexible, anti-static 82,4 5 Black, (ISO 2878:2011), corrugated, latex free, breathing tube. 102,0 108,8 5 For use with respiratory / diving / safety 110,0 117,2 anaesthesia 5circuits, breathing apparatus, medical gas delivery. 127,0 134,2 5 Standard range shown include a flat 25mm cuff 152,0 159,2 5 at each end. These be made to customer 203,0tubes can211,4 5 specific dimensions on cuff size, wall thickness of 254,0 corrugation 264,0size and length5 – a guide rubber, from 9.5mm ID to 50mm ID 90mm long to 2000mm long. Tube corrugations can be compressed during production to add greater flexibility and kink resistance. Please call Codan for details.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
15 Type nr. Corrugated 750 breathing 1.450 hose 1005076000 15 Application: Breathing 1.000 Hose 1.580 1005102000 Standard Length: Various metres 15 Working Temperature: 1.120 -30°C1.730 to 110°C1005110000 Inside: EPDM 15 1.250 2.000 1005127000 Colour: Black 15 Reinforcement: 1.500 2.380 1005152000 None 15 Outside: EPDM 2.000 3.750 1005203000 Colour: Black 15 Standards: EN2.500 1005254000 12342:1998 + 5.680 A1:2009 EU Dir 93/42/EEC amended 2007/47/EC Class IIa SMD
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015 This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 05/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
BUNKER HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
1905
2920
2930
2940
2950
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
BUNKER HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, Codan 1905 Bunker Hose
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de 1905 Outs Codan - i-de di a . (mm) di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Black, bunker hose with two 25,0 wrapped 31,4 5 charge eliminator wires to ensure complete discharge of 32,0 electricity.38,4 5 static For use in the oil44,4 industry, e.g. as unloading pipe 38,0 5 from ship to quay, or for transporting mineral 45,0 5 oil, fuel, etc. on 51,4 ships. Fits DIN clamps. 51,0 57,4 5 Max. 50% aromatics. 63,0 70,0 5 Please contact Codan for further information. 76,0 82,4 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
15 Type nr. 1905 250 420 Application: Loading and Unloading 15 Standard Length: 30040 metres 520 -30°C 610 to 70°C 15 Working Temperature: 380 Inside: NBR 15 Colour: Black 440 700 Reinforcement: Polyester 15 500 790 Outside: CR 15 Colour: Black 630 960 15 Standards: - 750 1.450
1005076000
1005025000 1005032000 1005038000 1005045000 1005051000 1005063000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 51,0
211,4 62,0
5 16
15 48
2.000 0
3.750 1.740
1005203000 1905051000
254,0 76,0
264,0 90,4
5 16
15 48
2.500 0
5.680 2.250
1005254000 1905076000
102,0
116,8
16
48
0
3.040
1905102000
127,0
142,2
16
48
0
3.830
1905127000
152,0
169,6
16
48 0 5.360 1905152000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
203,0
224,2
16
complied with. Codan Rubber’s warranty 0 is void in the event of misuse 8.450 such as excessive bending, crushing, stretching, use 48 1905203000 with incorrect media or use in environments outside the hose specification.
254,0
275,6
16
48
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
code 1005152000
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
0
10.730
1905254000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
BUNKER HOSES Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Black,2920 reinforced, layflat waterHose hose. Easy to Codan Bunker
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan 2920 - BS-1435
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Hose for loading and unloading dock and barge operations with31,4 hydrocarbons with5 aromatic 25,0 content up to 50%. Fully in accordance with BS32,0 Free ends 38,4 5 vulcanized 1435. or with steel flanges with the hose. Other dimensions, lengths or 38,0 44,4 5 features available on request. We manufacture 45,0 51,4hoses. 40 m coils 5 up to 3" any type of special and 20 m coils above. 51,0 57,4 "L10" Type. 5
Product code
76,0
82,4
5
Type nr. 2920 15 Application: Loading 250 and Unloading 420 1005025000 Standard Length: 40 metres 15 Working Temperature: 300 520 1005032000 -25°C to 85°C 15 Inside: SBR 380 610 1005038000 Colour: Black 15 Reinforcement: 440 700 1005045000 High Tensile Strength Synthetic 15 Cord 500 790 1005051000 Outside: SBR 15 Colour: Black 630 960 1005063000 Standards: BS-1435 15 750 1.450 1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 50,0
211,4 66,0
5 10
15 50
2.000 300
3.750 2.200
1005203000 2920050000
254,0 63,0
264,0 80,0
5 10
15 50
2.500 400
5.680 3.000
1005254000 2920063000
75,0
96,0
10
50
450
4.200
2920075000
102,0
124,0
10
50
600
5.500
2920102000
127,0
147,0
10
50 800 6.500 2920127000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
152,0
174,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse 7.600 such as excessive bending, crushing, stretching, use 50 900 2920152000 with incorrect media or use in environments outside the hose specification.
203,0
228,0
10
50
63,0
70,0
5
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
code 1005152000
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
1.200
10.900
2920203000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
BUNKER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2930 Bunker Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
15
250
420
1005025000
15
300
520
1005032000
25,0
31,4
5
32,0
38,4
5
Codan 2930 - BS-1435
Hose and unloading dock 38,0for loading44,4 5 and barge operations with hydrocarbons with aromatic 45,0 51,4 5 content up to 50%. Fully in accordance with BS51,0 Free ends 57,4 5 vulcanized 1435. or with steel flanges with or 63,0the hose. Other 70,0 dimensions, lengths 5 features available on request. We manufacture 76,0 82,4hoses. 40 m coils 5 up to 3" any type of special and 20 m coils above. "S7" Type. 102,0 108,8 5
Product code
110,0
117,2
5
127,0
134,2
5
15 Type nr. 2930 380 610 1005038000 Application: Loading and Unloading 15 440 700 1005045000 Standard Length: 20 metres 15 Working Temperature: 500 -25°C 790 to 85°C 1005051000 15 Inside: SBR 630 960 1005063000 Colour: Black 15 Reinforcement: 750 High Tensile1.450 Strength 1005076000 Synthetic Cord. Helix wire and antstatic wire 15 1.000 1.580 1005102000 Outside: SBR 15 Colour: Black 1.120 1.730 1005110000 Standards: BS-1435 15 1.250 2.000 1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
102,0
129,0
7
35
560
6.300
2930102000
152,0
183,0
7
35 850 12.500 2930152000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
203,0
249,0
7
35 1.200 2930203000 complied with. Codan Rubber’s warranty is void in the event of misuse19.800 such as excessive bending, crushing, stretching, use
254,0
298,0
7
Please contact Codan Rubber for individual product manufacturing tolerances. 35 1.350 25.400
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
code
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification.
2930254000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
BUNKER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2940 Bunker Hose
Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
Codan 294038,4 - BS-1435 32,0
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
5
15
250
420
1005025000
5
15
300
520
1005032000
38,0for loading44,4 5 and barge Hose and unloading dock operations with hydrocarbons with 45,0 51,4 5 aromatic content up to 50%. Fully in accordance with BS51,0 Free ends 57,4 5 vulcanized 1435. or with steel flanges with the hose. Other dimensions, lengths or 63,0 70,0 5 features available on request. We manufacture 76,0 82,4hoses. 40 m coils 5 up to 3" any type of special and 20 m coils 108,8 above. "S10" Type. 5 102,0 110,0
117,2
5
127,0
134,2
5
15 Type nr. 2940 380 610 1005038000 Application: Loading and Unloading 15 440 700 1005045000 Standard Length: 20 metres 15 Working Temperature: 500 790 1005051000 -25°C to 85°C 15 Inside: SBR 630 960 1005063000 Colour: Black 15 Reinforcement: 750 High Tensile1.450 Strength 1005076000 Synthetic and antstatic wire 1005102000 15 Cord. Helix wire 1.000 1.580 Outside: SBR 15 Colour: Black 1.120 1.730 1005110000 Standards: BS-1435 15 1.250 2.000 1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
102,0
132,0
10
50
650
7.600
2940102000
152,0
191,0
10
50 850 14.500 2940152000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
203,0
249,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse22.800 such as excessive bending, crushing, stretching, use 50 1.200 2940203000 with incorrect media or use in environments outside the hose specification.
254,0
298,0
10
50
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
code
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
1.350
32.400
2940254000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
BUNKER HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2950 Bunker Hose
Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
Codan 295038,4 - BS-1435 32,0
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
5
15
250
420
1005025000
5
15
300
520
1005032000
38,0for loading44,4 5 and barge Hose and unloading dock operations with hydrocarbons with 45,0 51,4 5 aromatic content up to 50%. Fully in accordance with BS51,0 Free ends 57,4 5 vulcanized 1435. or with steel flanges with the hose. Other dimensions, lengths or 63,0 70,0 5 features available on request. We manufacture 76,0 82,4hoses. 40 m coils 5 up to 3" any type of special and 20 m coils 108,8 above. "S15" Type. 5 102,0 110,0
117,2
5
127,0
134,2
5
15 Type nr. 2950 380 610 1005038000 Application: Loading and Unloading 15 440 700 1005045000 Standard Length: 20 metres 15 Working Temperature: 500 790 1005051000 -25°C to 85°C 15 Inside: SBR 630 960 1005063000 Colour: Black 15 Reinforcement: 750 High Tensile1.450 Strength 1005076000 Synthetic and antstatic wire 1005102000 15 Cord. Helix wire 1.000 1.580 Outside: SBR 15 Colour: Black 1.120 1.730 1005110000 Standards: BS-1435 15 1.250 2.000 1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
102,0
132,0
15
75
650
7.600
2950102000
152,0
191,0
15
75 850 14.500 2950152000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
203,0
249,0
15
complied with. Codan Rubber’s warranty is void in the event of misuse22.800 such as excessive bending, crushing, stretching, use 75 1.200 2950203000 with incorrect media or use in environments outside the hose specification.
254,0
298,0
15
75
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
code
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
1.350
32.400
2950254000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
CHEMICAL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
1316
2300
2315
2321
2322
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
2323
6001
6015
INDEX
6016
6017
7301
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
CHEMICAL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1316 - EN 12115/99 - DIN 2823 Ins i dewrapped, Outs i de S&D hose. Worki t nr. 1316 Bend Ra di us Wei ght Black, flexible Fornguse in the BursType di a . (mm) industry, di a . (mm) Pres s ure BAR Pres s ure BAR (mm) chemicals e.g. as flexible connection Application: Chemicals, EPDM(g/m)
between pipelines and tanks/tankers. Suitable 25,0 31,4chemicals. For 5maximum for acids and other safety, please consult 32,0 38,4 the chemical5 resistance list to check the chemical used. 38,0 44,4using stainless5DIN clamps. Normally installed Please 45,0 contact Codan 51,4 for further information. 5
Product code
51,0
57,4
5
63,0
70,0
5
Standard Length: 40 metres 15 Working Temperature: 250 -30°C 420 to 90°C 1005025000 Inside: EPDM 15 300 520 1005032000 Colour: Black 15 Reinforcement: 380 610 1005038000 Polyester w/double steel helix 15 wire and anti-static 440 wire 700 1005045000 Outside: EPDM 15 Colour: Black 500 790 1005051000 - DIN960 2823 1005063000 15 Standards: EN 12115/99 630
179
76,0
82,4
5
15
750
1.450
1005076000
182
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de
117,2 Outs i de
5 ng Worki
15 t Burs
1.120 Bend Ra di us
1.730 Wei ght
1005110000 Product
di127,0 a . (mm)
di134,2 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 1.250
(g/m) 2.000
code 1005127000
152,0 19,0
159,2 31,0
5 10
15 48
1.500 125
2.380 720
1005152000 1316019000
203,0 25,0
211,4 37,0
5 10
15 48
2.000 150
3.750 900
1005203000 1316025000
254,0 32,0
264,0 44,0
5 10
15 48
2.500 175
5.680 1.120
1005254000 1316032000
38,0
51,0
10
48
225
1.350
1316038000
51,0
66,0
10
48
275
1.870
1316051000
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM WELDING & GAS INDEX
Codan 1005 Codan 1316 Chemical Hose
63,0 79,0 10 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
48 210 2.160 1316063000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
76,0
92,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse 3.250 such as excessive bending, crushing, stretching, use 48 350 1316076000 with incorrect media or use in environments outside the hose specification.
102,0
102,0
10
48
Please contact Codan Rubber for individual product manufacturing tolerances.
450
4.950
1316102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
CHEMICAL HOSES Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Codan 2300 Chemical Hose
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2300 - EN12115 - DIN2823 Ins i dewrapped, Outs i de S/D hose Worki BursType t nr. 2300 Bend Ra di us Wei ght Black, flexible withngdouble di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR (mm) (g/m) steel wire helix and integrated charge eliminator Application: Chemicals, UHMW-PE
copper be attached to fittings at both 25,0 wire (must 31,4 5 ends). For use in the chemical industry, e.g. as 32,0 connection 38,4between pipelines 5 and flexible tanks/tankers for various chemicals. 38,0 44,4 5 For maximum safety, please contact Codan for 45,0 51,4 5 chemical resistance. Vacuum: 51,0 90%. 57,4 5 Normally installed using stainless DIN clamps. 63,0 70,0 5
Product code
15 Standard Length: 25040 metres 420 1005025000 Working Temperature: -30°C to 100°C 15 Inside: UHMW-PE 300black 520 1005032000 Colour: Black 15 380 610 1005038000 Reinforcement: Polyester w/ double steel helix 15 and anti-static440 700 1005045000 wire. 15 Outside: EPDM500 790 1005051000 Colour: Black with colour coding acc to norm 15 Standards: EN12115 630 - DIN2823 960 1005063000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
76,0
82,4
5
15
750
1.450
1005076000
WELDING & GAS
182
102,0
108,8
5
15
1.000
1.580
1005102000
1.730
1005110000
INDEX
110,0
117,2
5
15
1.120
di127,0 a . (mm)
Ins i de
Outs i de di134,2 a . (mm)
Worki ng Pres s 5 ure BAR
Burs t Pres s15 ure BAR
Bend Ra di us 1.250 (mm)
Wei ght 2.000 (g/m)
Product
152,0 19,0 203,0 25,0 254,0 32,0
159,2 0,0 211,4 37,0 264,0 44,0
5 10 5 10 5 10
15 48 15 48 15 48
1.500 125 2.000 150 2.500 200
2.380 690 3.750 880 5.680 1.140
1005152000 2300019000 1005203000 2300025000 1005254000 2300032000
38,0
51,0
10
48
230
1.390
2300038000
300
2.000
2300051000
1005127000 code
51,0
65,0
10
48
63,5
79,5
10
of vulcanised Rubber Products). The individual conditions of an application the life time of each product. 48 390 3.170will affect2300063000 Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
76,0
92,0
10
48 450 3.170 with incorrect media or use in environments outside the hose specification.
2300076000
102,0
119,0
10
48
2300102000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use Please contact Codan Rubber for individual product manufacturing tolerances.
620
4.650
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
CHEMICAL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2315 Chemical Hose Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2315 -
Black, wrapped suction and pressure hose with Type nr. 2315 double steel helix and charge eliminator wire. Application: Chemicals, EPDM Note! The wire Outs musti de be connected to the Length: metres Wei ght Ins i de Worki ng fittings BursStandard t Bend Ra40 di us Product ataboth ends todiensure Working -30°C (g/m) to 150°C di . (mm) a . (mm)complete Preselectrical s ure BAR Pres s ure BAR Temperature: (mm) code discharge. For use in industrial applications, e.g. Inside: EPDM as25,0 flexible connection and 31,4 between pipelines 5 15 Colour: Black 250 420 1005025000 tanks/tankers. Suitable for acids and other Reinforcement: Polyester w/ double steel helix 32,0 38,4 5 15 and anti-static300 520 1005032000 chemicals. wire. Vacuum: maximum safety,5 please 38,0 90%. For 44,4 15 Outside: EPDM380 610 1005038000 consult the chemical resistance list. Normally Colour: Black 45,0 51,4 5 15 440 700 1005045000 installed using DIN clamps. Please contact Standards: 51,0 for further 57,4 5 15 500 790 1005051000 Codan information. 63,0
70,0
5
15
630
960
1005063000
76,0
82,4
5
15
750
1.450
1005076000
102,0 Ins i de di110,0 a . (mm)
108,8 Outs i de di117,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.000 Bend Ra di us (mm) 1.120
1.580 Wei ght (g/m) 1.730
1005102000 Product
127,0 19,0 152,0 25,0
134,2 30,6 159,2 37,8
5 16 5 16
15 50 15 50
1.250 95 1.500 125
2.000 710 2.380 1.060
1005127000 2315019000 1005152000 2315025000
203,0 32,0 254,0 35,0
211,4 46,4 264,0 49,0
5 16 5 16
15 50 15 50
2.000 160 2.500 175
3.750 1.300 5.680 1.340
1005203000 2315032000 1005254000 2315035000
38,0
52,4
16
50
190
1.460
2315038000
51,0
65,4
16
50
250
1.950
2315051000
code 1005110000
79,0 This hose 63,0 specification sheet has been prepared with great care in order to provide 16 you with all the information you need.
50 350 2.930will affect2315063000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
76,0
93,2
16
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 50 450 3.480 2315076000 with incorrect media or use in environments outside the hose specification.
102,0
122,4
16
50
Please contact Codan Rubber for individual product manufacturing tolerances.
610
5.770
2315102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
CHEMICAL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2321 Chemical Hose Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2321 - EN12115
Black, wrapped suction and pressure hose with Type nr. 2321 steel wire helix and charge eliminator copper Application: Chemicals, Viton Ins i de Worki ngto the BursStandard t Bend Ra40 di us Product wire. Note! TheOuts wirei de must be connected Length: metres Wei ght di a . (mm) a . (mm) s ure BAR Pres s ure BAR Temperature: (mm) code fittings at bothdiends to ensurePres complete Working -20°C (g/m) to 100°C electrical discharge. The inner FKM(Viton) layer Inside: FKM 25,0 the hose 31,4 5 hot oils, 15 Colour: Black 250 420 1005025000 provides with resistance to petro-chemical products containing benzol and Reinforcement: Polyester w/steel wire helix and 32,0 38,4 5 15 300 520 1005032000 toluol. For use in industrial applications, e.g. as anti-static copper wire. 38,0 connection 44,4between pipelines 5 and 15 Outside: CR 380 610 1005038000 flexible tanks/tankers. Vacuum: 90%. 45,0 51,4 5 15 Colour: Black 440 700 1005045000 Normally installed using DIN clamps. Standards: EN12115 51,0 57,4 please contact 5 Codan for 15 500 790 1005051000 For maximum safety, chemical resistance 63,0 70,0 questions. 5 15 630 960 1005063000 76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de
117,2 Outs i de
5 ng Worki
15 t Burs
1.120 Bend Ra di us
1.730 Wei ght
1005110000 Product
di127,0 a . (mm)
di134,2 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 1.250
(g/m) 2.000
code 1005127000
152,0 19,0
159,2 31,0
5 10
15 48
1.500 115
2.380 800
1005152000 2321019000
203,0 25,0
211,4 38,0
5 10
15 48
2.000 190
3.750 1.010
1005203000 2321025000
254,0 32,0
264,0 0,0
5 10
15 48
2.500 190
5.680 1.230
1005254000 2321032000
38,0
52,0
10
48
230
1.690
2321038000
51,0
66,0
10
48
350
2.220
2321051000
65,0 81,5 10 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
48 450 3.210 2321063000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
76,0
93,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse 3.840 such as excessive bending, crushing, stretching, use 48 550 2321076000 with incorrect media or use in environments outside the hose specification.
102,0
120,0
10
48
Please contact Codan Rubber for individual product manufacturing tolerances.
850
5.420
2321102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
CHEMICAL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1005Chemical Codan 2322 Hose Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2322 - Black, wrapped suction and pressure hose with Type nr. 2322 Ins i de Outs i de Worki ng Burs t Bend Ra di us Wei ght Product double steel helix and charge eliminator wire. Application: Chemicals, Natural Rubber di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR (mm) (g/m) code Note! The wire must be connected to the fittings Standard Length: 40 metres at25,0 both ends to ensure -20°C 420 to 80°C 1005025000 31,4 complete electrical 5 15 Working Temperature: 250 discharge. For use in industrial applications, e.g. Inside: NR 38,4 between pipelines 5 15 Colour: Bright 300 520 1005032000 as32,0 flexible connection and tanks/tankers. Suitable for acids and other Reinforcement: Polyester w/ double steel helix 38,0 44,4 5 15 380 610 1005038000 chemicals. Vacuum: 90%. and anti-static wire. 45,0 51,4 please consult 5 the chemical 15 Outside: NR 440 700 1005045000 For maximum safety, resistance list. 57,4 51,0 5 15 Colour: Black 500 790 1005051000 Normally installed using DIN clamps. Standards: 63,0 contact Codan 70,0 for further information. 5 15 630 960 1005063000 Please 76,0 82,4 5 15 750 1.450 1005076000 102,0 110,0
108,8 117,2
5 5
15 15
1.000 1.120
1.580
1005102000
1.730
1005110000
Ins i de di127,0 a . (mm)
Outs i de di134,2 a . (mm)
Worki ng Pres s 5 ure BAR
Burs t Pres s15 ure BAR
Bend Ra di us 1.250 (mm)
Wei ght 2.000 (g/m)
Product
152,0 25,0 203,0 32,0 254,0 38,0
159,2 39,0 211,4 46,0 264,0 52,5
5 10 5 10 5 10
15 40 15 40 15 40
1.500 125 2.000 160 2.500 190
2.380 1.050 3.750 1.260 5.680 1.430
1005152000 2322025000 1005203000 2322032000 1005254000 2322038000
51,0
65,5
10
40
255
1.910
2322051000
63,0
78,5
10
40
350
2.690
2322063000
1005127000 code
76,0
93,0
10
40
450
3.440
3222076000
89,0
106,0
10
40
535
3.970
2322089000
102,0
121,0
10
40
610
5.430
2322102000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
CHEMICAL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2323 Chemical Hose Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2323 - -
Blue, wrapped suction and pressure hose with Type nr. 2323 double steel helix and charge eliminator wire. Application: Chemicals, Hypalon Ins i de Worki ng fittings BursStandard t Bend Ra40 di us Product Note! The wire Outs musti de be connected to the Length: metres Wei ght di . (mm) a . (mm)complete Preselectrical s ure BAR Pres s ure BAR Temperature: (mm) code ataboth ends todiensure Working -30°C (g/m) to 100°C discharge. Inside: CSM 25,0 31,4 applications,5e.g. as flexible 15 Colour: Black 250 420 1005025000 For use in industrial connection between pipelines and tanks/tankers. Reinforcement: Polyester w/ double steel helix 32,0 38,4 5 15 300 520 1005032000 Suitable for acids and other chemicals. Vacuum: and anti-static wire. 38,0 44,4 5 15 Outside: CR 380 610 1005038000 90%. For maximum safety, 45,0 51,4 please consult 5 the chemical 15 Colour: Blue 440 700 1005045000 resistance list. Standards: 51,0 57,4 5 15 500 790 1005051000 Normally installed using DIN clamps. Please 63,0 contact Codan 70,0 for further information. 5 15 630 960 1005063000 76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de
117,2 Outs i de
5 ng Worki
15 t Burs
1.120 Bend Ra di us
1.730 Wei ght
1005110000 Product
di127,0 a . (mm)
di134,2 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 1.250
(g/m) 2.000
code 1005127000
152,0 25,0 203,0 32,0
159,2 39,0 211,4 46,0
5 10 5 10
15 40 15 40
1.500 125 2.000 160
2.380 1.140 3.750 1.380
1005152000 2323025000 1005203000 2323032000
254,0 38,0
264,0 52,5
5 10
15 40
2.500 190
5.680 1.570
1005254000 2323038000
51,0
65,5
10
40
255
2.100
2323051000
63,0
78,5
10
40
350
2.880
2323063000
93,0 This hose 76,0 specification sheet has been prepared with great care in order to provide 10 you with all the information you need.
40 450 3.700will affect2323076000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
89,0
106,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 40 535 4.270 2323090000 with incorrect media or use in environments outside the hose specification.
102,0
121,0
10
40
Please contact Codan Rubber for individual product manufacturing tolerances.
610
5.760
2323102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
CHEMICAL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 6001 Chemical Hose
Ins i de Outs i de di a . (mm) 6001 di a .-(mm) Codan -
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
25,0 31,4 5 Green, smooth, flexible, lightweight pressure 32,0with anti-static, 38,4 charge-eliminating 5 hose inner rubber use in car paint shops, paint 38,0 layer. For44,4 5 cabins, paint guns, etc. Resistant to chemicals 45,0 51,4for nitro lacquer. 5 The hose and solvents. Ideal must be flushed with solvent before 51,0 57,4 5 use. Silicone-free surface ensures problem-free 63,0 70,0 5 consult the painting. For maximum safety, please chemical resistance list. Normally 76,0 82,4 5installed using brass fittings, and either hose clamps or 102,0 108,8 crimped-on low-pressure fittings. 5 Please Codan for further information. 110,0 contact 117,2 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
15
250 420 1005025000 Type nr. 6001 15 Application: Paint 300 Spray 520 1005032000 15 Standard Length: 38050 metres 610 1005038000 Working Temperature: -40°C to 100°C 15 Inside: EPDM 440 700 1005045000 Colour: Black 15 500 790 1005051000 Reinforcement: PVA 15 Outside: EPDM630 960 1005063000 15 Colour: Green 750 1.450 1005076000 Standards: 15 1.000 1.580 1005102000 15
1.120
1.730
1005110000
127,0
134,2
5
15
1.250
2.000
1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de
211,4 Outs i de
5 ng Worki
15 t Burs
2.000 Bend Ra di us
3.750 Wei ght
1005203000 Product
di254,0 a . (mm)
di264,0 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 2.500
(g/m) 5.680
code 1005254000
6,0
12,4
20
60
40
127
6001006000
9,0
16,0
20
60
50
188
6001009000
11,0
18,0
20
60 55 218 6001011000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
13,0
21,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 60 247 6001013000
16,0
24,0
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
75
342
6001016000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
CHEMICAL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 6015 Chemical Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Codan 601531,4 -25,0
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
32,0smooth, high-quality 38,4 5 hose with Blue, spray-paint exceptionally smooth 38,0 44,4 polyamide inner 5 liner. Resistant to oil, benzene, chemicals and 45,0 51,4For use in the industrial 5 aromatic solvents. paint sector for various purposes. Silicone-free 51,0 57,4 5 surface ensures problem-free painting. For 63,0 70,0 5 chemical maximum safety, please consult the resistance list. 82,4 76,0 5 Care must be taken when fitting connectors 102,0 108,8 5 because of the inner polyamide liner. Please Codan for further information. 110,0 contact 117,2 5
Product code
1005025000
15 Type nr. 6015 300 520 1005032000 15 Application: Paint 380 Spray 610 1005038000 Standard Length: 50 metres 15 Working Temperature: 440 -30°C 700 to 100°C1005045000 Inside: PA 66 15 500 790 1005051000 Colour: Bright 15 Reinforcement: 630 960 1005063000 Rayon 15 Outside: NBR/PVC 750 1.450 1005076000 Colour: Blue 15 1.000 1.580 1005102000 Standards: 15 1.120 1.730 1005110000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
127,0
134,2
5
15
1.250
2.000
1005127000
WELDING & GAS
182
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de
211,4 Outs i de
5 ng Worki
15 t Burs
2.000 Bend Ra di us
3.750 Wei ght
1005203000 Product
di254,0 a . (mm)
di264,0 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 2.500
(g/m) 5.680
code 1005254000
6,0
0,0
20
60
25
120
6015006000
8,0
15,4
20
60
70
184
6015008000
INDEX
17,0 20with all the information you need. This hose 10,0 specification sheet has been prepared with great care in order to provide you
60 208 will affect6015010000 of vulcanised Rubber Products). The80 individual conditions of an application the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
11,0
18,4
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 90 233 6015011000 with incorrect media or use in environments outside the hose specification.
12,7
20,1
20
60
Please contact Codan Rubber for individual product manufacturing tolerances.
100
260
6015013000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
CHEMICAL HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 6016 Chemical Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
5
15
500
790
1005051000
Codan 601657,4 - BGR 132 51,0
63,0 smooth, high-quality 70,0 5 Green, spray-paint hose with inner liner.5 Resistant to 76,0smooth polyamide 82,4 oil, benzene, chemicals and aromatic solvents. 102,0 108,8 5 for various For use in the industrial paint sector purposes. Silicone-free surface ensures problem110,0 117,2 5 free painting. For maximum safety, please 127,0 the chemical 134,2 resistance list. 5 Care must consult be taken when fitting of the 152,0 159,2 connectors because 5 inner polyamide liner. Antistatic properties acc. 203,0 211,4 5 wire. Please BGR 132 through the build in copper contact further information. 254,0 Codan for 264,0 5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Rubber Products). Bend Ra diconditions us of an application Wei ght Product of vulcanised The individual will affect the life time of each product. please ensure that resistance to chemicals and cleaning procedures in our written product information is Pres sTherefore ure BAR (mm) (g/m) code complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
8,0
14,0
15 Type nr. 6016 630 960 1005063000 15 Application: Paint 750 Spray 1.450 1005076000 Standard Length: - metres 15 Working Temperature: 1.000 -10°C1.580 to 60°C 1005102000 Inside: Polyamid 15 1.120 1.730 1005110000 Colour: Black 15 Reinforcement: 1.250 2.000 1005127000 Polyester with antistatic wire 15 Outside: PVC/NBR 1.500 2.380 1005152000 Colour: Green 15 Standards: BGR 2.000 3.750 1005203000 132 15 2.500 5.680 1005254000
20
with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
60
35
135
6016008000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
CHEMICAL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 6017 Chemical Hose
Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
Codan 601738,4 - BGR 132 32,0
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
5
15
250
420
1005025000
5
15
300
520
1005032000
38,0 smooth, high-quality 44,4 5 Black, spray-paint hose with smooth polyamide inner liner. Resistant to 45,0 51,4 5 oil, benzene, chemicals and aromatic solvents. 51,0 57,4 5 for various For use in the industrial paint sector purposes. Silicone-free surface ensures problem63,0 70,0 5 free painting. For maximum safety, please 76,0 the chemical 82,4 resistance list. 5 Care must consult be taken when fitting of the 102,0 108,8 connectors because 5 inner polyamide liner. Antistatic properties acc. 110,0 117,2 5 wire. Please BGR 132 through the build in copper contact Codan for further information. 127,0 134,2 5
15 Type nr. 6017 380 610 1005038000 Application: Paint Spray 15 440 700 1005045000 Standard Length: 50 metres 15 Working Temperature: 500 790 1005051000 -10°C to 60°C 15 Inside: PA 630 960 1005063000 Colour: Black 15 Reinforcement: 750 1.450 1005076000 Polyester with antistatic wire 15 Outside: PVC/NBR 1.000 1.580 1005102000 Colour: Black with a white stripe 15 Standards: BGR 1.120 1.730 1005110000 132 15 1.250 2.000 1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
20
60
25
120
6017006000
6,0
12,0
code
8,0
14,0
20
60 35 135 6017008000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
10,0
17,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 60 170 6017010000 with incorrect media or use in environments outside the hose specification.
13,0
20,0
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
60
220
6017013000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
CHEMICAL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 7301 Chemical Hose
Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
32,0 5 Codan 730138,4 - EN/ISO 5771
38,0 44,4 5 Black, smooth, flexible, high-quality 45,0 51,4 5 hose with impervious inner CIIR liner which ensures that 51,0 57,4 5 ammonia cannot permeate the hose. Mainly agriculture as flexible 63,0 for use in 70,0 5 connection for transferring ammonia from 76,0 to tank. Also 82,4suitable for many 5 other tanker purposes thanks to the ideal inner 102,0 108,8 5liner and high pressure range. 110,0 contact 117,2 5 Please Codan for further information. 127,0 134,2 5
Product code
1005025000
15
300
520
1005032000
15
380
610
1005038000
15 Type nr. 7301 440 700 1005045000 Application: Ammonia 15 Standard Length: 50050 metres 790 1005051000 -40°C 960 to 100°C1005063000 15 Working Temperature: 630 Inside: CIIR 15 Colour: Black 750 1.450 1005076000 Reinforcement: PVA 15 1.000 1.580 1005102000 Outside: EPDM 15 Colour: Black 1.120 1.730 1005110000 15 Standards: EN/ISO 1.2505771 2.000 1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
25
125
52
274
7301006000
6,3
17,3
code
12,7 23,7 25 125 71 413 7301013000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
19,1
31,1
25
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 125 93 619 7301019000 with incorrect media or use in environments outside the hose specification.
25,4
37,4
25
125
Please contact Codan Rubber for individual product manufacturing tolerances.
112
763
7301025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
COOLANT HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
1206
4219
4801
4804
4820
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
4854
4893
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
COOLANT HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1206 Coolant Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Codan 1206 - -
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
25,0 31,4 5 Customer specified 32,0 38,4Black Hose, made 5 specially with a cover for use in oil/greasy enviroments 38,0 moulding 44,4 5 ensures around machines. The Liner cooling of the moulding machine. The 45,0 51,4 5 hose is outside smooth till/incl. 25mm and wrapped 51,032mm and57,4 5 from up- Length from 32mm is 40mtr. Bendradius is a calculated approximate value 63,0 70,0 5 for hoses without steel helix wire. For further 76,0 82,4contact Codan.5 information please
15
Bend Ra di us (mm)
Wei ght (g/m)
250
420
Product code
1005025000
102,0
108,8
5
15 Type nr. 1206 300 520 1005032000 Application: Coolant / Anti-freeze / Glycol 15 Standard Length: 38050 metres 610 1005038000 Working Temperature: 120°C to -30°C 15 440 700 1005045000 Inside: EPDM 15 Colour: Black 500 790 1005051000 PET 15 Reinforcement: 630 960 1005063000 Outside: NBR/PVC 15 Colour: Black 750 1.450 1005076000 15 Standards: - 1.000 1.580 1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0
134,2
5
15
1.250
2.000
1005127000
152,0 Ins i de
159,2 Outs i de
5 ng Worki
15 t Burs
1.500 Bend Ra di us
2.380 Wei ght
1005152000 Product
di203,0 a . (mm)
di211,4 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 2.000
(g/m) 3.750
code 1005203000
254,0 12,5
264,0 21,0
5 20
15 60
2.500 190
5.680 300
1005254000 1206013000
19,0
28,0
20
60
220
470
1206019000
25,0
36,0
20
60
310
660
1206025000
32,0 43,0 12 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
36 390 920 1206032000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
38,0
51,0
12
complied with. Codan Rubber’s warranty is void in the event of misuse 1.031 such as excessive bending, crushing, stretching, use 36 440 1206038000
50,0
65,0
10
30
with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
500
1.960
1206050000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
COOLANT HOSES
Codan 4219 Coolant Hose CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan Hose 1005 Air / Water Hose Codan 4219 4219 Coolant Coolant Hose
Codan 4219 - SAE J20 R5 Black corrugated hose with cuffs both ends, intended for automotive Codan 4219 -- SAE J20 R5 1005 Codan 4219 SAEand J20industrial R5 applications. The hoses are equipped with an internal galvanized spring that the Black corrugated hose with cuffsreinforces bothEasy ends, Black, reinforced, layflat water to Black corrugated hose with cuffshose. both ends, hose and ensures stability. high-quality intended for automotive andThe industrial handle and extremely space-saving. Flexible, intended automotive and industrial product isfor manufactured from EPDM compounds applications. Theathoses are equipped with an even when used low temperatures. Often used applications. The hoses areexceed equipped an and reinforced to meet and SAEwith J20 R5 internal galvanized spring that reinforces the on building sites for immersion pumps, etc. or internal galvanized springare that reinforces the specifications. Thestability. hoses available in more hose and ensures The high-quality where liquids are carried under pressure. hose and ensures stability. The high-quality than 40 different sizes, covering a wide range or of product isinstalled manufactured from clamps, EPDM compounds Normally using hose Bauer product is manufactured from EPDM compounds applications. and reinforced tosimilar. meet and exceed SAE J20 R5 Stortz fittings, or Please contact Codan and reinforced to meet and exceed SAE J20 R5 specifications. The hoses are available in more for further information. specifications. The hoses are available in more than 40 different sizes, covering a wide range of than 40 different sizes, covering a wide range of applications. applications. Ins i de diIns a . (mm) i de di a . (mm) 25,0 Ins i de Ins i de 25,0 di a25,0 . (mm) di a . (mm)
Outs i de diOuts a . (mm) i de di a . (mm) 0,0 Outs i de Outs i de di a31,4 . (mm) di a0,0 . (mm)
Worki ng PresWorki s ure BAR ng Pres s ure BAR 2 Worki ng Worki ng 5 BAR Pres s 2 ure Pres s ure BAR
Type nr. 4219 Application: Coolant / Anti-freeze / Glycol Standard Length: - metres Working Temperature: -25°C to 120°C Type nr. 4219 1005 Type nr.EPDM 4219 Inside: Application: Coolant / Anti-freeze / Glycol Air / Water Hose Application: Coolant / Anti-freeze / Glycol Colour: Black Standard Length: -40 metres metres Standard Length:Steel - metres Reinforcement: helix wire inside Working Temperature: -25°C to 120°C -30°C to 90°C Working Temperature: -25°C 120°C Outside: EPDM Inside: EPDM Inside: NR/SBR EPDM Colour: Black Colour: Black Standards: SAE J20 R5helix wire inside Reinforcement: Steel Reinforcement: Polyester Steel helix wire inside Outside: EPDM NR/SBR Outside: EPDM Colour: Black Colour: Black Standards: SAE J20 R5 Standards: SAE J20 R5
Burs t Pres s ure BursBAR t
Bend Ra di us (mm)Ra di us Bend
Pres s ure BAR 5 t Burs Burs t 15 BAR Pres s 5 ure Pres s ure BAR
(mm) 180 Bend Ra di us Bend Ra di us 250 (mm) 210 (mm)
Wei ght Product code (g/m) Wei ght Product (g/m) code 100 42190250180 Wei ght Product code Wei ght 420 42190250210 1005025000 Product code (g/m) 100 (g/m)
32,0 38,4 300 520 42190250360 1005032000 25,0 0,0 2 5 360 100 25,0 0,0 25 515 180 100 42190250180 25,0 0,0 2 5 180 100 42190250180 38,0 44,4 380 610 42190250486 1005038000 25,0 0,0 2 5 486 100 25,0 0,0 25 515 210 100 42190250210 25,0 0,0 2 5 210 100 42190250210 45,0 51,4 440 700 42190260571 1005045000 26,0 0,0 2 5 571 100 25,0 0,0 25 515 360 100 42190250360 25,0 0,0 2 5 360 100 42190250360 51,0 57,4 5 15 500 790 1005051000 28,0 0,0 2 5 500 100 42190280500 25,0 0,0 2 5 486 100 42190250486 25,0 0,0 2 5 486 100 42190250486 63,0 70,0 5 15 630 960 1005063000 30,0 0,0 2 5 210 100 42190300210 26,0 0,0 2 5 571 100 42190260571 26,0 0,0 2 5 571 100 42190260571 76,0 82,4 750 1.450 42190300270 1005076000 30,0 0,0 2 5 270 100 28,0 0,0 25 515 500 100 42190280500 28,0 0,0 2 5 500 100 42190280500 102,0 108,8 5 15 1.000 1.580 1005102000 30,0 0,0 2 5 310 100 42190300310 30,0 0,0 2 5 210 100 42190300210 30,0 0,0 2 5 210 100 42190300210 110,0 117,2 1.120 1.730 42190300450 1005110000 30,0 0,0 2 5 450 100 30,0 0,0 25 515 270 100 42190300270 30,0 0,0 2 5 270 100 42190300270 127,0 134,2 1.250 2.000 42190320187 1005127000 30,0 0,0 2 5 187 100 30,0 0,0 25 515 310 100 42190300310 30,0 0,0 2 5 310 100 42190300310 152,0 159,2 5 15 1.500 2.380 1005152000 30,0 0,0 2 5 250 100 42190320250 30,0 0,0 2 5 450 100 42190300450 30,0 0,0 2 5 450 100 42190300450 203,0 211,4 2.000 3.750 42190320275 1005203000 32,0 0,0 2 5 275 100 30,0 0,0 25 515 187 100 42190320187 30,0 0,0 2 5 187 100 42190320187 254,0 264,0 2.500 5.680 42190320325 1005254000 32,0 0,0 2 4 325 100 30,0 0,0 25 515 250 100 42190320250 30,0 0,0 2 5 250 100 42190320250 32,0 0,0 2 5 375 250 42190320375 32,0 0,0 2 5 275 100 42190320275 32,0 0,0 2 5 275 100 42190320275 32,0 0,0 2 5 400 250 42190320400 32,0 0,0 2 4 325 100 42190320325 32,0 0,0 2 4 325 100 42190320325 0,0 250 42190320425 The individual conditions of an application will affect the life time of each product. This hose32,0 specification sheet has been prepared 32,0 0,0with great care in order to provide2 2you with all the information you need. 5 5 of vulcanised Rubber Products).425 375 250 42190320375 our written product information is Written advice Codan Rubber before using any hose2 with untested media or before using in 5 Therefore please ensure that resistance 32,0must be obtained from 0,0 375 to chemicals and cleaning 250procedures in42190320375 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection 32,0 0,0 2 525 250 42190320525 32,0use. Hoses should be replaced 0,0 2 to the cover of the hose or in the 5 5 with incorrect media or use in environments 400 outside the hose specification. 250 42190320400 of hoses before if any physical damage is seen, especially 32,0 2 (Storage 5 Please contact Codan Rubber for individual 400 product manufacturing tolerances. 250 42190320400 area around the couplings. All products must0,0 be stored in accordance with ISO 2230:2002 32,0 0,0 2 5 575 250 42190320575 32,0 0,0 2 5 425 250 42190320425 Cont’d 32,0 0,0 2 5 425 250 42190320425 32,0 38,0 2 5 400 200 421932380400 32,0 0,0 2 5 525 250 42190320525 Denmark Coda n Rubber Da nma2rk A/S Valdemarshaab 32,0 0,0 5 1,DK-4600 Køge, 525 250 42190320525 32,0 2 5 450 200 421932380450 32,0 2 +45 56 64 65 48 Mail: 5 i nfo@coda n.com 575 URL: www.coda 250 n.com 42190320575 Tel38,0 .0,0 +45 56 64 64 64 Fax 32,0 0,0 2 5 575 250 42190320575 32,0 38,0 2 5 400 200 421932380400 32,0 38,0 2 5 400 200 421932380400 06/01/2015 32,0 38,0 2 5 450 200 421932380450 This hose specification sheet has been prepared with great care in order to provide you with all the The individual conditions of an application will affect the life time of each product. Therefore please ensure 32,0Written advice must38,0 2 before using any hose with 5 that resistance to chemicals 450 200 information you need. be obtained from Codan Rubber and cleaning procedures in our written421932380450 product information is complied with. untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
COOLANT HOSES Codan Coolant Hose Codan 4219 4219 Hose 1005 Coolant Air / Water Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
33,0
34,0
2
5
350
200
421933340350
BRAKE
35
34,0
38,0
2
5
300
200
421934380300
BREATHING
41
34,0
38,0
2
5
600
200
421934380600
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
32,0
38,0
2
5
500
200
421932380500
35,0
0,0
2
5
450
250
42190350250
35,0
0,0
2
5
285
250
42190350250
38,0
0,0
2
5
146
250
42190380146
38,0 Codan 42190,0- SAE J20 R52 Codan 4219 Codan 10050,0-- SAE J20 R52 38,0
190
250
42190380190
5
5
Black corrugated hose with cuffs both ends, 38,0 corrugated 0,0 2 Black hose with cuffs bothEasy ends, intended for automotive and industrial Black, reinforced, layflat water hose. to intended for automotive and industrial applications. The hoses are equipped with an handle and extremely space-saving. Flexible, 38,0 0,0 2 applications. Theathoses arethat equipped withthe an internal galvanized spring reinforces even when used low temperatures. Often used 38,0 2 internal spring that the hose andgalvanized ensures stability. The reinforces high-quality on building sites0,0 for immersion pumps, etc. or hose TheEPDM high-quality product isensures manufactured where liquids are carriedfrom under pressure. 38,0and 0,0stability. 2 compounds product isinstalled manufactured from EPDM compounds and reinforced to meet and exceed SAE J20 R5 or Normally using hose clamps, Bauer 40,0 0,0meet 2 SAE J20 and reinforced to and exceed R5 specifications. The hoses are available inCodan more Stortz fittings, or similar. Please contact specifications. The hoses are available more than 40 different sizes, covering a2wide in range of for further information. 40,0 0,0 than 40 different sizes, covering a wide range of applications. 40,0 0,0 2 applications. 40,0 44,0 2 40,0 40,0
Ins i de 45,0 i de diIns a . (mm) i de diIns a . (mm) 45,0 di a25,0 . (mm)
44,0 44,0
Outs i de 0,0 Outs i de di a . (mm) i de diOuts a0,0 . (mm) di a31,4 . (mm)
5 5 5 5 5 5 5 5
2
5
2
5
Worki ng 2s ure Worki ngBAR Pres Worki Pres s2 ureng BAR Pres s ure 5 BAR
273 250 42190380273 Type nr. 4219 311 268 / Glycol 42190380311 Type nr. Application: Coolant / Anti-freeze Type nr. 4219 1005 Application: Coolant / Anti-freeze / Glycol Standard Length: metres Application: Air / Water Hose 350 302 42190380350 Standard Length: metres Working Temperature: -25°C to 120°C Standard Length: -40 metres 400 325 42190380400 Working Temperature: -25°C to 90°C 120°C Inside: EPDM Working Temperature: -30°C to Inside: EPDM Colour:NR/SBR Black438 Inside: 357 42190380438 Colour: Black Steel helix wire inside Reinforcement: Colour: Black 350 Steel helix 100 42190400350 Reinforcement: Outside: EPDM Reinforcement: Polyester wire inside Outside: EPDM Colour: Black Outside: NR/SBR 401 200 42190400401 Colour: Black Standards: SAE J20 R5 Colour: Black 450J20 R5 200 42190400450 Standards: SAE Standards: 260 200 421940440260
Burs t 5s ure Burs t BAR Pres PresBurs s5 uretBAR Pres s ure 15 BAR
370
200
421940440370
440
200
421940440440
Bend Ra di us 156 Bend Ra di us (mm) Bend Ra di us (mm) 211 (mm) 250
Wei ght 100 Wei ght (g/m) Wei (g/m) 100ght (g/m) 420
Product
42190450156 code Product code
42190450211 Product code 1005025000 45,0 0,0 2 5 286 300 42190450286 25,0 0,0 2 5 180 100 42190250180 32,0 38,4 300 520 42190250180 1005032000 25,0 0,0 25 515 180 100 45,0 0,0 22 55 337 330 42190450337 25,0 0,0 210 100 42190250210 38,0 44,4 5 15 380 610 1005038000 25,0 0,0 2 5 210 100 42190250210 45,0 0,0 22 55 371 200 42190450371 25,0 0,0 360 100 42190250360 45,0 51,4 5 15 440 700 1005045000 25,0 0,0 2 5 360 100 42190250360 45,0 0,0 22 55 420 200 42190450420 25,0 0,0 486 100 42190250486 51,0 57,4 500 790 42190250486 1005051000 25,0 0,0 25 515 486 100 45,0 0,0 22 55 476 200 42190450476 26,0 0,0 571 100 42190260571 63,0 70,0 5 15 630 960 1005063000 26,0 0,0 2 5 571 100 42190260571 45,0 0,0 22 55 597 615 42190450597 28,0 0,0 500 100 42190280500 76,0 82,4 5 15 750 1.450 1005076000 28,0 0,0 2 5 500 100 42190280500 45,0 56,0 22 55 891 200 421945560891 30,0 0,0 210 100 42190300210 102,0 108,8 1.000 1.580 42190300210 1005102000 30,0 0,0 25 515 210 100 50,0 0,0 22 55 576 300 42190500576 30,0 0,0 270 100 42190300270 110,0 117,2 5 15 1.120 1.730 1005110000 30,0 0,0 2 5 270 100 42190300270 50,0 0,0 22 55 609 620 42190500609 30,0 0,0 310 100 42190300310 127,0 134,2 1.250 2.000 42190300310 1005127000 30,0 0,0 25 515 310 100 50,0 57,0 22 55 310 200 421950570310 30,0 0,0 450 100 42190300450 152,0 159,2 1.500 2.380 42190300450 1005152000 30,0 0,0 25 515 450 100 51,0 0,0 22 55 180 200 42190510180 30,0 0,0 187 100 42190320187 203,0 211,4 5 15 2.000 3.750 1005203000 30,0 0,0 2 5 187 100 42190320187 51,0 0,0 22 55 311 316 42190510311 30,0 0,0 250 100 42190320250 254,0 264,0 2.500 5.680 42190320250 1005254000 30,0 0,0 25 515 250 100 51,0 0,0 22 55 359 200 42190510359 32,0 0,0 275 100 42190320275 32,0 0,0 2 5 275 100 42190320275 56,0 0,0 22 54 221 200 42190560221 32,0 0,0 325 100 42190320325 32,0 0,0 2 4 325 100 42190320325 57,0 0,0 22 55 269 168 42190570269 32,0 0,0 375 250 42190320375 0,0with great care in order to provide2you with all the information you need. 5 of vulcanised Rubber Products).375 250 42190320375 The individual conditions of an application will affect the life time of each product. This hose32,0 specification sheet has been prepared 57,0 320 200 our written product information is Written advice Codan Rubber before using any hose2 32,0must be obtained from 0,0 0,0 2with untested media or before using in 55 Therefore please ensure that resistance 400 to chemicals and cleaning 250procedures in42190570320 42190320400 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection 32,0 0,0 2 5 400 250 42190320400 incorrect media or use in environments outside the hose specification. of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the 57,0 0,0 22 (Storage 55 with 355 42190570355 32,0 425 product manufacturing 400 250 42190320425 Please contact Codan Rubber for individual tolerances. area around the couplings. All products must0,0 be stored in accordance with ISO 2230:2002 32,0 0,0 2 5 425 250 42190320425 57,0 0,0 2 5 431 450 42190570431 32,0 0,0 2 5 525 250 42190320525 32,0 0,0 2 5 525 250 42190320525 57,0 0,0 55 1,DK-4600 Køge, 560 500 42190570560 Denmark Coda n Rubber Da nma2 32,0 0,0 2rk A/S Valdemarshaab 575 250 42190320575 32,0 0,0 2 5 575 250 42190320575 Tel 0,0 . +45 56 64 64 64 Fax URL: www.coda n.com 63,0 22 +45 56 64 65 48 Mail: 55 i nfo@coda n.com 482 600 42190630482 32,0 38,0 400 200 421932380400 32,0 38,0 2 5 400 200 421932380400 32,0 38,0 2 5 individual conditions450 200 421932380450 This hose specification sheet has been prepared with great care in order to provide you with all the of an application will affect the life time of each product. Therefore please ensure 06/01/2015 32,0Written advice must38,0 2 before using any hose with 5 The 450 200 information you need. be obtained from Codan Rubber that resistance to chemicals and cleaning procedures in our written421932380450 product information is complied with. untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products This hose specification sheet has been prepared with great care in order to provide you with all the information you need. must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products). Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Please contact Codan Rubber for individual product manufacturing tolerances. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Cont’d
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
COOLANT HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 4801 Coolant Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Codan 4801 - SAE J 20 R3
Burs t Pres s ure BAR
Wei ght (g/m)
Product code
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
102,0
108,8
5
250 420 1005025000 Type nr. 4801 15 300 520 1005032000 Application: Coolant / Anti-freeze / Glycol 15 Standard Length: 38025 metres 610 1005038000 Working Temperature: -40°C to 100°C 15 440 700 1005045000 Inside: EPDM 15 Colour: Black 500 790 1005051000 Polyester 15 Reinforcement: 630 960 1005063000 Outside: EPDM 15 Colour: Black 750 1.450 1005076000 Standards: SAE J 20 R3 15 1.000 1.580 1005102000
STEAM
179
110,0
117,2
5
15
1.120
1.730
1005110000
WELDING & GAS
182
127,0
134,2
5
15
1.250
2.000
1005127000
Ins i de 152,0 di a . (mm)
Outs i de 159,2 di a . (mm)
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 1.500 (mm)
Wei ght 2.380 (g/m)
Product 1005152000
3.750
1005203000
10,0 254,0
17,0 264,0
10 5
40 15
80 2.500
230 5.680
4801010000 1005254000
12,7
19,5
10
40
88
245
4801013000
MATERIAL HANDLING 120
INDEX
25,0 31,4 5 Black, smooth, flexible rubber hose specially 32,0 38,4 5 designed for refrigerants. For use throughout 38,0 44,4industry where5engine cooling with closed cooling systems is required. 45,0 51,4 5 Capable of withstanding hot oil spray where this 51,0 57,4 5 applies. Also 50 m lengths. 5 63,0available in 70,0 Normally installed using hose clamps. 76,0 contact Codan 82,4 for further information. 5 Please
Bend Ra di us (mm)
203,0
211,4
5
15
15
2.000
code
14,0
21,0
10
40
98
270
4801014000
15,0
22,0
10
40
105
275
4801015000
15,9
23,0
10
40 112 300 4801016000 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
19,1
26,5
10
Please contact Codan Rubber for individual product manufacturing tolerances. 40 133 405
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification.
4801019000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
COOLANT HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan / Water Hose Codan 1005 4804 Air Coolant Hose
Codan Codan 1005 4804 -- DIN 73411 Black, reinforced, layflat water hose. Easy to Black, coolant hose for coolant and handlewrapped and extremely space-saving. Flexible, anti-freeze in cars, buses, lorries, tractors, even when used at low temperatures. Often etc. used (1102) on building sites for immersion pumps, etc. or Normally installed using hose where liquids are carried underclamps. pressure. Available in long lengths request. Normally installed using on hose clamps, Bauer or Please contactor Codan for Please further contact information Stortz fittings, similar. Codan and dimensions. for further information.
Type nr. 1005 Type nr. 4804 Application: Air / Water Hose Application: Coolant Anti-freeze / Glycol Standard Length: 40 /metres Standard Length: 1 metres Working Temperature: -30°C to 90°C Working Temperature: -30°C to 90°C Inside: NR/SBR Inside: Colour:EPDM Black Colour: Black Polyester Reinforcement: Reinforcement: Outside: NR/SBRPolyester Outside: EPDM Colour: Black Colour: Black Standards: Standards: DIN 73411
Ins i de Ins i de di a . (mm) di a . (mm)
Outs i de Outs i de di a . (mm) di a . (mm)
Worki ng Worki ng Pres s ure BAR Pres s ure BAR
Burs t Burs t Pres s ure BAR Pres s ure BAR
Bend Ra di us Bend Ra di us (mm) (mm)
Wei ght Wei ght (g/m) (g/m)
Product Product code code
25,0 13,0 32,0 15,0 38,0 16,0 45,0 18,0 51,0 19,0 63,0 25,0 76,0 32,0 102,0 38,0 110,0 42,0 127,0 45,0 152,0 50,0 203,0 51,0 254,0 55,0
31,4 20,0 38,4 22,0 44,4 23,0 51,4 24,0 57,4 25,0 70,0 32,0 82,4 40,0 108,8 46,0 117,2 50,0 134,2 54,0 159,2 59,0 211,4 61,0 264,0 65,0
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
250 200 300 205 380 210 440 215 500 220 630 300 750 370 1.000 425 1.120 450 1.250 470 1.500 540 2.000 540 2.500 580
420 210 520 290 610 300 700 350 790 600 960 650 1.450 710 1.580 820 1.730 960 2.000 1.070 2.380 1.070 3.750 1.210 5.680 1.200
1005025000 4804013000 1005032000 4804015000 1005038000 4804016000 1005045000 4804018000 1005051000 4804019000 1005063000 4804025000 1005076000 4804032000 1005102000 4804038000 1005110000 4804042000 1005127000 4804045000 1005152000 4804050000 1005203000 4804051000 1005254000 4804055000
57,0
65,0
5
15
600
1.340
4804057000
610
1.610
4804060000
60,0
69,0
5
15
63,0
72,0
5
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. 15 620 1.480 4804063000 Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
65,0
75,0
5
with incorrect media or use in environments 15 640outside the hose specification. 1.480
4804065000
75,0
5
15
4804065000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
65,0 70,0 75,0 76,0
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use Please contact Codan Rubber for individual product manufacturing tolerances.
660
1.660
80,0 5 A/S Valdemarshaab 15 1,DK-4600 Køge,650 1.500 4804070000 Denmark Coda n Rubber Da nma rk Fax +45 56 64 65 48 Tel 87,0 . +45 56 64 64 64 5 n.com4804075000 Mail: 15 i nfo@coda n.com 785URL: www.coda 1.970 86,0
5
15
660
1.760
4804076000
06/01/2015
80,0sheet has been prepared 90,0with great care in order 5to provide you with all the 15 810 2.010 4804080000 This hose specification The individual conditions of an application will affect the life time of each product. Therefore please ensure information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
85,0
97,0
5
that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
15
820
2.020
4804085000
Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Cont’d
di a . (mm)
42,0 25,0 45,0
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
di a . (mm)
50,0 31,4 54,0
Pres s ure BAR
Pres s ure BAR
15 15 15
450 250 470
960 420 1.070
4804042000 1005025000 4804045000
5 55
(mm)
(g/m)
code
32,0 50,0 38,0 51,0
38,4 59,0 44,4 61,0
55 55
15 15 15 15
300 540 380 540
520 1.070 610 1.210
1005032000 4804050000 1005038000 4804051000
45,0 55,0 51,0 57,0
51,4 65,0 57,4 65,0
55 55
15 15 15 15
440 580 500 600
700 1.200 790 1.340
1005045000 4804055000 1005051000 4804057000
63,0 60,0 76,0 63,0
70,0 69,0 82,4 72,0
55 55
15 15 15 15
630 610 750 620
960 1.610 1.450 1.480
1005063000 4804060000 1005076000 4804063000
102,0 65,0 110,0 65,0
108,8 75,0 117,2 75,0
55 55
15 15 15 15
1.000 640 1.120 660
1.580 1.480 1.730 1.660
1005102000 4804065000 1005110000 4804065000
127,0 70,0 152,0 75,0
134,2 80,0 159,2 87,0
55 55
15 15 15 15
1.250 650 1.500 785
2.000 1.500 2.380 1.970
1005127000 4804070000 1005152000 4804075000
203,0 76,0 254,0 80,0
211,4 86,0 264,0 90,0
5 5 5 5
15 15 15 15
2.000 660 2.500 810
3.750 1.760 5.680 2.010
1005203000 4804076000 1005254000 4804080000
85,0
97,0
5
15
820
2.020
4804085000
90,0
102,0
5
15
850
2.100
4804090000
102,0
114,0
5
15 2.300will affect4804102000 of vulcanised Rubber Products). The930 individual conditions of an application the life time of each product.
110,0
122,0
5
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 15 1.000 2.500 4804110000 with incorrect media or use in environments outside the hose specification.
COOLANT HOSES
Codan 4804 Coolant Hose
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Codan - DIN 734115 125,0 4804 137,0
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
15
1.230
2.650
4804125000
Black, wrapped coolant hose nr. 4804 ValdemarshaabType 1,DK-4600 Køge, Denmark Coda n Rubber Dafor nmacoolant rk A/S and anti-freeze inTel cars, lorries, tractors, Coolant Anti-freezen.com / Glycol +45 56 64etc. 65 48 Mail: iApplication: . +45buses, 56 64 64 64 Fax nfo@coda n.com URL:/ www.coda (1102) Standard Length: 1 metres of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Normally installed using hose clamps. Working Temperature: -30°C to 90°C Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in 06/01/2015 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection Available in long lengths on request. Inside: EPDM with incorrect media or use in environments outside the hose specification. of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the Please contact Codan Rubber for individual product manufacturing tolerances. area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage Please contact Codan for further information Colour: Black and dimensions. Reinforcement: Polyester Outside: EPDM 1,DK-4600 Køge, Denmark Coda n Rubber Da nma rk A/S ValdemarshaabColour: Black Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: iStandards: nfo@coda n.com URL: www.coda n.com DIN 73411 06/01/2015 Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
13,0
20,0
5
15
200
210
4804013000
15,0
22,0
5
15
205
290
4804015000
16,0
23,0
5
15
210
300
4804016000
18,0
24,0
5
15
215
350
4804018000
19,0
25,0
5
15
220
600
4804019000
25,0
32,0
5
15
300
650
4804025000
32,0
40,0
5
15
370
710
4804032000
38,0
46,0
5
15
425
820
4804038000
42,0
50,0
5
15
450
960
4804042000
45,0
54,0
5
15
470
1.070
4804045000
50,0
59,0
5
15
540
1.070
4804050000
51,0
61,0
5
15
540
1.210
4804051000
55,0
65,0
5
15
580
1.200
4804055000
57,0
65,0
5
15
600
1.340
4804057000
60,0
69,0
5
15
610
1.610
4804060000
63,0
72,0
5
15
620
1.480
4804063000
65,0
75,0
5
15
640
1.480
4804065000
65,0
75,0
5
15
660
1.660
4804065000
70,0
80,0
5
15
650
1.500
4804070000
75,0
87,0
5
15
785
1.970
4804075000
76,0
86,0
5
15
660
1.760
4804076000
80,0sheet has been prepared 90,0 with great care in order 5to provide you with all the 15The individual conditions of an810 2.010 4804080000 This hose specification application will affect the life time of each product. Therefore please ensure information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
85,0
97,0
5
that resistance to chemicals and cleaning procedures in our written product information is complied with.
in the event of misuse2.020 such as excessive bending, crushing, stretching, use 15Codan Rubber’s warranty is void 820 4804085000 with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Cont’d
COOLANT HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 4820 Coolant Hose Codan 4820 Coolant Hose Codan 1005 / Water Hose 4820 Air Coolant Hose
Codan 4820 - SAE J20 (class A) Codan 4820 - SAE J20 (class A) in Blue wrapped, flexible pressure hose made heat resistant silicone material. Codan 1005 4820 - SAE J20 (class A) Ozone, antifreeze, heat pressure and oil splash resistant. Blue wrapped, flexible hose made in Common applcations: Commercial vehicle heat resistant silicone material. Black, reinforced, layflat water hose. Easy Blue wrapped, flexible pressure hose madetoin heating andextremely cooling. High air and Ozone, antifreeze, heat andtemperature oil splash resistant. handle and space-saving. Flexible, heat resistant silicone material. water applications in general systems in Common applcations: Commercial vehicle even when used atheat low temperatures. Often used Ozone, antifreeze, and oilCooling splash resistant. generators and fixed engines. The hose isetc.and heating and cooling. High temperature air on building sites for immersion pumps, or Common applcations: Commercial vehicle normally attached to the stub bypressure. meanssystems of and a in water applications inHigh general Cooling where liquids are carried under heating and cooling. temperature air clamp or hose Allengines. sizes are available generators andclip. fixed The hosesystems is in 90 Normally installed using hose clamps, Bauer orin water applications in general Cooling degree elbows. normally attached to engines. the stub by contact means a Stortz fittings, similar. Please Codan generators andorfixed The hose isof Ask Codan for further information. clamp or hose clip.to Allthe sizes for further information. normally attached stubare byavailable means of in a 90 degree elbows. clamp or hose clip. All sizes are available in 90 Ask Codan for further information. degree elbows. Ask Codan for further information. Ins i de di a . (mm) Ins i de diIns a6,0 . (mm) i de di a8,0 . (mm)
Outs i de di a . (mm) Outs i de 12,0 diOuts a . (mm) i de di16,0 a . (mm)
Worki ng Pres s ure BAR Worki ng Pres s0 ureng BAR Worki Pres s 0 ure BAR
Type nr. 4820 Application: Coolant Hose Standard Length: 1 metres Type nr. 4820 Working Temperature: -40°C to 175°C Application: Coolant Hose Type nr. 1005 4820 Inside: Silicone Standard Length: 1 metres Application: Air / Water Hose Coolant Hose Colour: WorkingBlue Temperature: -40°C to 175°C Standard Length: 40 metres 1 metres Reinforcement: Three plies Inside: Silicone Working Temperature: -30°Coftopolester 90°C -40°C 175°C Outside: Silicone Colour:NR/SBR Blue Inside: Silicone Colour: Reinforcement: Three plies of polester Colour: Blue Black Blue Standards: SAE J20 (class A) of polester Outside: Silicone Reinforcement: Polyester Three plies Colour: Outside:Blue NR/SBR Silicone Standards: Colour: Black BlueSAE J20 (class A) Standards: SAE J20 (class A)
Burs t Pres s ure BAR Burs t PresBurs s44 uretBAR Pres s36 ure BAR
Bend Ra di us (mm) Bend Ra di us 60 (mm) Bend Ra di us (mm) 80
Wei ght (g/m) Wei ght 110 (g/m) Wei ght (g/m) 150
Product code Product 4820006000 code Product code 4820008000
6,0 12,0 0 44 60 110 4820006000 25,0 31,4 5 15 250 420 1005025000 10,0 18,0 0 33 100 190 4820010000 6,0 12,0 0 44 60 110 4820006000 8,0 16,0 0 36 80 150 4820008000 32,0 38,4 5 15 300 520 1005032000 13,0 21,0 0 25 130 240 4820013000 8,0 16,0 0 36 80 150 4820008000 10,0 18,0 0 33 100 190 4820010000 38,0 44,4 5 15 380 610 1005038000 16,0 24,0 0 21 160 290 4820016000 10,0 18,0 0 33 100 190 4820010000 13,0 21,0 0 25 130 240 4820013000 45,0 51,4 5 15 440 700 1005045000 19,0 27,0 0 19 190 360 4820019000 13,0 21,0 0 25 130 240 4820013000 16,0 24,0 0 21 160 290 4820016000 51,0 57,4 5 15 500 790 1005051000 25,0 33,0 0 15 250 450 4820025000 16,0 24,0 0 21 160 290 4820016000 19,0 27,0 0 19 190 360 4820019000 63,0 70,0 5 15 630 960 1005063000 28,0 34,0 0 14 280 500 4820028000 19,0 27,0 0 19 190 360 4820019000 25,0 33,0 0 15 250 450 4820025000 76,0 82,4 5 750 1.450 1005076000 32,0 40,0 0 12 320 580 4820032000 25,0 33,0 0 15 250 450 4820025000 28,0 34,0 0 14 280 500 4820028000 102,0 108,8 5 15 1.000 1.580 1005102000 35,0 43,0 0 12 350 625 4820035000 28,0 34,0 0 14 280 500 4820028000 32,0 40,0 0 12 320 580 4820032000 110,0 117,2 5 15 1.120 1.730 1005110000 38,0 46,0 0 11 380 680 4820038000 32,0 40,0 0 12 320 580 4820032000 35,0 43,0 0 12 350 625 4820035000 127,0 134,2 5 15 1.250 2.000 1005127000 40,0 48,0 0 10 400 720 4820040000 35,0 43,0 0 12 350 625 4820035000 38,0 46,0 0 11 380 680 4820038000 152,0 159,2 5 15 1.500 2.380 1005152000 42,0 50,0 0 10 420 750 4820042000 38,0 46,0 0 11 380 680 4820038000 40,0 48,0 0 10 400 720 4820040000 203,0 211,4 5 15 2.000 3.750 1005203000 45,0 53,0 0 9 450 760 4820045000 40,0 48,0 0 10 400 720 4820040000 42,0 50,0 0 10 420 750 4820042000 254,0 264,0 5 15 2.500 5.680 1005254000 48,0 56,0 0 9 480 860 4820048000 42,0 50,0 0 10 420 750 4820042000 45,0 53,0 0 9 450 760 4820045000 50,0 58,0 0 9 500 890 4820050000 45,0 53,0 0 9 450 760 4820045000 48,0 56,0 0 9 480 860 4820048000 54,0 62,0 0 8 540 950 4820054000 48,0 56,0 0 9 480 860 4820048000 50,0 58,0 0 9 500 890 4820050000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. This hose specification sheet has been prepared with great care in order to provide you with all the information you need. 57,0 0 8 570 1.000 Therefore please ensure that resistance to chemicals and cleaning procedures in our 4820057000 written product information is Written advice must be obtained from 65,0 Codan Rubber before using any hose with untested media or before using in 50,0 58,0 0 9 500 890 4820050000 54,0 62,0 0maintenance, care and inspection complied 8 with. Codan Rubber’s warranty 540 950 4820054000 is void in the event of misuse such as excessive bending, crushing, stretching, use applications not covered in the product data sheet. Codan Rubber recommends regular with incorrect media or use in environments outside the hose specification. of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the 60,0 68,0 0 8 600 1.080 4820060000 Please product manufacturing tolerances. area around the couplings. All products must be stored in accordance with ISO 2230:2002 54,0 62,0 0 (Storage 8 contact Codan Rubber for individual 540 950 4820054000 57,0 65,0 0 8 570 1.000 4820057000 63,0 71,0 0 7 630 1.130 4820063000 57,0 65,0 0 8 570 1.000 4820057000 60,0 68,0 0 8 600 1.080 4820060000 70,0 78,0 0 7 700 1.260 4820070000 Valdemarshaab 1,DK-4600 Køge, Denmark Coda n Rubber Da nma rk A/S 60,0 68,0 0 8 600 1.080 4820060000 63,0 71,0 0 7 630 1.130 4820063000 Tel 83,0 . +45 56 64 64 64 Fax0+45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com4820075000 75,0 6 750 1.350 63,0 71,0 0 7 630 1.130 4820063000 70,0 78,0 0 7 700 1.260 4820070000 70,0 75,0 75,0
78,0 83,0 83,0
0 0 0
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
7 700 1.260 4820070000 6 750 1.350 4820075000 06/01/2015 The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. 6Codan Rubber’s warranty is void 750 1.350 4820075000 in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Cont’d
COOLANT HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 4854 Coolant Hose Codan Air / Water Hose 4854 Coolant Hose Codan 1005
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed- using Codan 4854 SAE hose J20 clamps, R3 D2Bauer (Up orto Stortz fittings, or similar. Please contact Codan 31.8mm) for further4854 information. Codan - SAE J20 R3 D2 (Up to
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black 31.8mm) SAE J20 R4 D2 (Above Reinforcement: Polyester Outside:SAE NR/SBR 31.8mm) J20 R4 D2 (Above Colour: Black 31.8mm) Black, smooth EPDM rubber 90 degree hose for Type nr. 4854 Standards: coolant and anti-freeze in cars, buses, lorries, Application: Coolant Hose Black, smooth smooth EPDM rubber 90 degree degree hose for for Type nr. 4854 4854 tractors, etc Also used in industrial applications Standard Length: 8 metres Black, EPDM rubber 90 hose Type nr. coolant and in lorries, Application: Coolant for hot water. Part supplied withbuses, 203mm (8”) legs Working Temperature: -40°C to 125°C coolant and anti-freeze anti-freeze in cars, cars, buses, lorries, Application: Coolant Hose Hose tractors, etc Also used inthe industrial applications Standard Length: 8 8 metres metres which canetc beAlso cut to suitin application. Inside: EPDM tractors, used industrial applications Standard Length: Inshot i dewater. Outssupplied iusing de hose Worki ng (8”) t Bend Ra di us -40°C ght Product for Part with 203mm Temperature: to Normally installed clamps. Colour: Black for hot water. Part supplied with 203mm (8”) legs legs BursWorking Working Temperature: -40°CWei to 125°C 125°C di a . (mm) di a .to Pres s ure BAR Pres s ure BAR EPDM code which can be be cut cut to(mm) suit the the application. application. Inside: EPDM (mm) Reinforcement: Polyester (g/m) which can suit Inside: Normally installed using hose clamps. Colour: Black Outside: EPDM Normally installed using hose clamps. Colour: Black 25,0 31,4 5 15 Reinforcement: 250 420 1005025000 Polyester Colour: Black Polyester Reinforcement: Outside: EPDM SAE300 J20 R3 D2 (Up 520 to 31.8mm) SAE J20 Outside: EPDM 32,0 38,4 5 15 Standards: 1005032000 Colour: Black 31.8mm) R4 D2 (Above Colour: Black 38,0 44,4 5 15 Standards: SAE380 610 1005038000 Standards: SAE J20 J20 R3 R3 D2 D2 (Up (Up to to 31.8mm) 31.8mm) SAE SAE J20 J20 R4 D2 D2 (Above (Above 31.8mm) 31.8mm) 45,0 51,4 5 15 R4 440 700 1005045000 51,0 Ins63,0 i de di a . (mm) Ins ii de Ins76,0 de di di aa .. (mm) 9,5 (mm) 102,0
57,4
5
15
500
Outs 70,0i de di a . (mm) 82,4ii de Outs Outs de di108,8 (mm) di aa17,5 .. (mm)
Worki 5 ng Pres s ure BAR 5 ng Worki Worki ng Pres ss56 ure BAR BAR Pres ure
Burs15 t Pres s ure BAR Burs tt Pres Burs15 Pres ss ure ure BAR 17 BAR 15
Bend 630Ra di us (mm) 750Ra Bend Bend Ra di di us us (mm) (mm) 1.000
84,0 84,0
1 1
4 4
--
790
1005051000
Wei ght 1005063000 Product 960 (g/m)
code
850 850
4854076 4854076
1.450 Wei Product Wei ght ght 1005076000 Product (g/m) code 100 4854010 (g/m) code 1.580 1005102000 12,7 20,7 17 -105 4854013 110,0 117,2 56 15 1.120 1.730 9,5 17,5 6 17 100 4854010 9,5 17,5 6 17 100 1005110000 4854010 15,9 23,9 6 17 145 4854016 127,0 134,2 5 15 1.250 2.000 1005127000 12,7 20,7 6 17 105 4854013 12,7 20,7 6 17 105 4854013 19,1 27,1 14 -150 4854019 152,0 159,2 55 15 1.500 2.380 15,9 23,9 6 17 145 1005152000 4854016 15,9 23,9 6 17 145 4854016 22,0 30,0 5 14 -200 4854022 203,0 211,4 5 15 2.000 3.750 1005203000 19,1 27,1 5 14 150 4854019 19,1 27,1 5 14 150 4854019 25,4 33,4 4 12 -300 4854025 254,0 264,0 5 15 2.500 5.680 1005254000 22,0 30,0 5 14 200 4854022 22,0 30,0 5 14 200 4854022 28,6 36,6 4 12 320 4854028 25,4 33,4 4 12 300 4854025 25,4 33,4 4 12 -300 4854025 31,8 39,8 4 12 -350 4854031 28,6 36,6 4 12 320 4854028 28,6 36,6 4 12 320 4854028 35,0 43,0 3 9 400 4854035 31,8 39,8 4 12 350 4854031 31,8 sheet has been prepared 39,8 - conditions of an application 350 of12 vulcanised Rubber Products). The individual will affect the life4854031 time of each product. This hose specification with great care in order to provide you4 with all the information you need. please ensure that resistance to chemicals and cleaning procedures in our written product information is Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in 38,1 46,1 3maintenance, care and inspection Therefore 8 -- in the event of misuse such as410 4854038 complied excessive bending, crushing, stretching, use applications not covered in the product data43,0 sheet. Codan Rubber recommends regular3 35,0 9 with. Codan Rubber’s warranty is void 400 4854035 35,0 43,0 3 9 400 4854035 with incorrect media or use in environments outside the hose specification. of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the Please contact Codan Rubber for individual product manufacturing tolerances. area around the couplings. All products must59,0 be stored in accordance with ISO 2230:2002 (Storage 51,0 2 7 520 4854051 38,1 46,1 3 8 -410 4854038 38,1 46,1 3 8 410 4854038 63,0 71,0 2 6 680 4854063 51,0 59,0 2 7 520 4854051 51,0 59,0 2 7 520 4854051 Coda n Rubber Da nma rk1 A/S Valdemarshaab4 1,DK-4600 Køge, Denmark 76,0 84,0 -850 4854076 63,0 71,0 2 6 680 4854063 63,0 71,0 2 6 680 Fax +45 56 64 65 48 Tel . +45 56 64 64 64 Mail: i nfo@coda n.com URL: www.coda n.com 4854063 76,0 76,0
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
06/01/2015
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
COOLANT HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 4893 Coolant Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
25,0 Codan 489331,4 --
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
1005025000
15
300
520
1005032000
32,0 38,4 5 Black, moulded 38,0 flexible, corrugated, 44,4 5 coolant hose for pressureless use. 45,0 contact Codan 51,4 for further information. 5 Please
Product code
MATERIAL HANDLING 120
51,0
57,4
5
OIL
130
63,0
70,0
5
PETROL
148
76,0
82,4
5
POWERSTEERING
164
102,0
108,8
5
PVC
167
110,0
117,2
5
15 Type nr. 4893 380 610 1005038000 Application: Coolant / Anti-freeze / Glycol 15 Standard Length: 4401 metres 700 1005045000 -30°C 790 to 110°C1005051000 15 Working Temperature: 500 Inside: EPDM 15 Colour: Black 630 960 1005063000 Reinforcement: None 15 750 1.450 1005076000 Outside: 15 Colour: 1.000 1.580 1005102000 15 Standards: - 1.120 1.730 1005110000
STEAM
179
127,0
134,2
5
15
1.250
2.000
1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de di254,0 a . (mm)
211,4 Outs i de di264,0 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
2.000 Bend Ra di us (mm) 2.500
3.750 Wei ght (g/m) 5.680
1005203000 Product
WELDING & GAS INDEX
182
code 1005254000
25,0
33,0
0
0
20
610
4893025000
32,0
40,0
0
0
30
690
4893032000
38,0
46,0
0
45,0
53,0
0
51,0
59,0
0
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
0
50
820
4893038000
0
75
970
4893045000
0
75
1.100
4893051000
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
FOOD HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
8009
8021
8024
8031
8033
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
8034
8035
8037
INDEX
8038
8040
project
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
FOOD HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan 8009 Food Hose
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
25,0
31,4
5
15
250
420
1005025000
COOLANT
77
32,0
38,4
5
15
300
520
1005032000
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
38,0 5 kat. 2. EU 15 380 1005038000 Codan 800944,4 - BfR, kap XXI, Reg. No.: 1935/2004 &610 2023/2006 45,0 51,4 5 Red, 51,0smooth, flexible 57,4 hose with BfR-approved 5 inner rubber layer. For hot and cold beverages, 63,0 70,0 juice and milk.5Inner and e.g. beer, wine, fruit outer surfaces resistant to vegetable 76,0 82,4 5 and animal oils. Certification can be supplied. It is 102,0 108,8 5 recommended that new hoses are flushed with 5% soda solution before use. Flushing 110,0 117,2 5 after use is also recommended. Normally installed using 127,0 connectors 134,2 or hose clamps. 5 stainless Please Codan for further information. 152,0 contact 159,2 5
15
440
700
1005045000
203,0
211,4
5
15 Type nr. 8009 500 790 1005051000 Application: Food / Beverages 15 Standard Length: 63050 metres 960 1005063000 Working Temperature: -20°C to 100°C 15 750 1.450 1005076000 Inside: NBR 15 Colour: White1.000 1.580 1005102000 Reinforcement: PVA 15 1.120 1.730 1005110000 Outside: NBR/PVC 15 Colour: Red 1.250 2.000 1005127000 kap XXI, kat. 2.380 2. EU Reg.1005152000 No.: 15 Standards: BfR, 1.500 1935/2004 & 2023/2006 15 2.000 3.750 1005203000
254,0
264,0
5
15
2.500
5.680
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
1005254000 Product code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
12,7
21,6
20
Therefore please ensure that resistance product information is 60 70to chemicals and cleaning procedures 0 in our written 8009013000 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
19,1
28,6
20
Please contact Codan Rubber for individual 60 90product manufacturing tolerances.0
with incorrect media or use in environments outside the hose specification.
8009019000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
FOOD HOSES Codan 1005 -
Codan 8021 Food Hose Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
Codan 8021 - BfR, kap XXI, kat. 2. EU Reg. No.: 1935/2004 & 2023/2006
GAS
99
Ins i de Outs i de Worki ng Burs t Bend Ra di us Grey, smooth, di flexible Type di a . (mm) a . (mm)hose with PresBfR-approved s ure BAR Pres s ure BARnr. 8021 (mm)
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
inner rubber layer. For hot and cold beverages, e.g. beer, wine, fruit 25,0 31,4 juice and milk.5Inner and outer surfaces resistant to vegetable and animal 32,0 38,4 5 oils. Certification can44,4 be supplied. 38,0 5 It is recommended that new hoses are flushed 45,0 51,4 5 with 5% soda solution before use. Flushing after 51,0 57,4 5 use is also recommended. Normally installed using stainless connectors or 63,0 70,0 5 hose clamps. 76,0 contact Codan 82,4 for further information. 5 Please
Wei ght (g/m)
Product code
Application: Food / Beverages 15 Standard Length: 25050 metres 420 1005025000 Working Temperature: -20°C to 100°C 15 Inside: NBR 300 520 1005032000 15 Colour: White 380 610 1005038000 Reinforcement: PVA 15 440 700 1005045000 Outside: NBR/PVC 15 Colour: Grey 500 790 1005051000 Standards: BfR, kap XXI, kat. 2. EU Reg. No.: 15 630 960 1005063000 1935/2004 & 2023/2006 15 750 1.450 1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de
134,2 Outs i de
5 Worki ng
15 Burs t
1.250 Bend Ra di us
2.000 Wei ght
1005127000 Product
di152,0 a . (mm)
di159,2 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 1.500
(g/m) 2.380
code 1005152000
203,0 6,3 254,0 9,5
211,4 15,0 264,0 18,5
5 20 5 20
15 60 15 60
2.000 60 2.500 74
3.750 203 5.680 275
1005203000 8021006000 1005254000 8021010000
12,7
21,6
20
60
86
333
8021013000
15,9
25,1
20
60
100
411
8021016000
19,1
28,6
20
60 114 490 will affect8021019000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
22,3
32,3
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 130 592 8021022000 with incorrect media or use in environments outside the hose specification.
25,4
35,6
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
142
673
8021025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
FOOD HOSES Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Black, reinforced, layflat water hose. Easy to Codan 8024 Food Hose Flexible, handle and extremely space-saving.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan - iBfR, Ins i de 8024 Outs de di a . (mm) di a . (mm)
kap Worki XXI,ngkat. 2. EU Burs Reg. 1935/2004 &Wei2023/2006 t No.: Bend Ra di us ght Product Pres s ure BAR
Pres s ure BAR
Blue, smooth, flexible hose with BfR-approved 25,0rubber layer. 31,4For hot and cold 5 beverages, inner e.g. beer, wine, fruit juice and milk. 32,0 38,4 5Inner and outer surfaces resistant to vegetable and animal 38,0 44,4 5 oils. Certification can51,4 be supplied. 45,0 5 It is recommended that new hoses are flushed 51,05% soda solution 57,4 before use. Flushing 5 with after use is also recommended. 63,0 70,0 5 Normally installed using stainless connectors or 76,0clamps. 82,4 5 hose Please Codan for further information. 102,0 contact 108,8 5
(mm)
(g/m)
code
Type nr. 8024 15 Application: Food 250/ Beverages420 1005025000 Standard Length: 50 metres 15 300 520 1005032000 Working Temperature: -20°C to 100°C 15 Inside: NBR 380 610 1005038000 15 Colour: White 440 700 1005045000 Reinforcement: PVA 15 Outside: NBR/PVC 500 790 1005051000 15 Colour: Blue 630 960 1005063000 Standards: BfR, kap XXI, kat. 2. EU Reg. No.: 15 1935/2004 & 2023/2006 750 1.450 1005076000 15 1.000 1.580 1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0
134,2
5
15
1.250
2.000
1005127000
152,0 Ins i de di203,0 a . (mm)
159,2 Outs i de di211,4 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.500 Bend Ra di us (mm) 2.000
2.380 Wei ght (g/m) 3.750
1005152000 Product
254,0 6,3
264,0 15,0
5 20
15 60
2.500 60
5.680 192
1005254000 8024006000
9,5
18,5
20
60
74
262
8024010000
12,7
21,6
20
60
86
317
8024013000
code 1005203000
25,1 This hose 15,9 specification sheet has been prepared with great care in order to provide 20 you with all the information you need.
60 100 392 will affect8024016000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
19,1
28,6
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 114 469 8024019000 with incorrect media or use in environments outside the hose specification.
25,4
35,6
20
60
Please contact Codan Rubber for individual product manufacturing tolerances.
142
645
8024025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
FOOD HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Codan 1005Food Codan 8031 Hose Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 8031 - FDA White, pressure hose, Worki highlyng resistant Ins i dewrapped Outs i de BursType t nr. 8031 Bend Ra di us Wei ght Product to oils, for animal and vegetable oils. Inner Application: Animal Oils di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR (mm) / Vegetable (g/m) code rubber surface, odour and taste free (FDA Standard Length: 40 metres standards). Mainly -30°C 420 to 100°C1005025000 25,0 31,4for use in the food 5 industry 15 Working Temperature: 250 where oils and animal fats often reduce hose Inside: NBR 32,0 life. 38,4 5 15 Colour: White 300 520 1005032000 service Normally installed using stainless hose clamps Reinforcement: Polyester 38,0 44,4 5 15 380 610 1005038000 or clamp fittings. Outside: CR/NBR 45,0 51,4 5 15 440 700 1005045000 Please contact Codan for further information. Colour: White 51,0 57,4 5 15 Standards: FDA500 790 1005051000 63,0
70,0
5
15
630
960
1005063000
76,0
82,4
5
15
750
1.450
1005076000
102,0 Ins i de di110,0 a . (mm)
108,8 Outs i de di117,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.000 Bend Ra di us (mm) 1.120
1.580 Wei ght (g/m) 1.730
1005102000 Product
127,0 25,0
134,2 40,0
5 10
15 30
1.250 0
2.000 1.080
1005127000 8031025000
152,0 32,0
159,2 47,0
5 10
15 30
1.500 0
2.380 1.300
1005152000 8031032000
203,0 38,0
211,4 56,0
5 10
15 30
2.000 0
3.750 1.790
1005203000 8031038000
254,0 40,0
264,0 59,0
5 10
15 30
2.500 0
5.680 2.090
1005254000 8031040000
51,0
72,0
10
30
0
2.790
8031051000
63,0
85,0
10
30
0
3.540
8031063000
code 1005110000
103,0 This hose 76,0 specification sheet has been prepared with great care in order to provide 10 you with all the information you need.
30 0 conditions of an application 5.280will affect8031076000 of vulcanised Rubber Products). The individual the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
89,0
118,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 30 0 6.430 8031089000 with incorrect media or use in environments outside the hose specification.
102,0
131,0
10
30
Please contact Codan Rubber for individual product manufacturing tolerances.
0
7.240
8031102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
FOOD HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1005Food Codan 8033 Hose Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 8033 - FDA Blue, wrapped,Outs flexible hoseng with Ins i de i de pressureWorki BursType t nr. 8033 Bend Ra di us Wei ght Product special compound outer coating which ensures Application: Cleaning di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR (mm) (g/m) code that the hose is exceptionally hard-wearing and Standard Length: 40 metres weather Mainly for use as -30°C 420 to 100°C1005025000 25,0 resistant. 31,4 5 a hot water 15 Working Temperature: 250 hose for cleaning purposes in dairies, Inside: EPDM 32,0 38,4 15 Colour: White 300 520 1005032000 slaughterhouses and elsewhere in 5the food industry where hot water is used for Reinforcement: Polyester 38,0 44,4 5 15 380 610 1005038000 flushing/cleaning. Outside: EPDM 45,0 51,4 5 15 440 700 1005045000 Normally installed using stainless or brass Colour: Blue fittings clamps. 51,0 and hose57,4 5 15 Standards: FDA500 790 1005051000 Please contact Codan for further information. 63,0 70,0 5 15 630 960 1005063000 76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
Ins i de 110,0
di a . (mm)
Outs i de 117,2 di a . (mm)
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 1.120 (mm)
Wei ght 1.730 (g/m)
Product 1005110000
2.000 490 2.380
1005127000 8033013000 1005152000
16,0 203,0 19,0 254,0
27,0 211,4 31,0 264,0
40 15 40 15
0 2.000 0 2.500
610 3.750 730 5.680
8033016000 1005203000 8033019000 1005254000
25,0
39,0
10 5 10 5 10
40
0
1.020
8033025000
127,0 13,0 152,0
134,2 24,0 159,2
5 10 5
15 40 15
1.250 0 1.500
code
30,0
44,0
10
40
0
1.200
8033030000
32,0
46,0
10
40
0
1.260
8033032000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
38,0
53,0
10
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is 40 0 1.580 8033038000 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
51,0
70,0
10
Please contact Codan Rubber for individual 40 0product manufacturing tolerances. 2.620
with incorrect media or use in environments outside the hose specification.
8033051000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
FOOD HOSES Codan 1005 Air / Water Hose CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Codan 8034 Food Hose
Codan 1005 Black, reinforced, Codan 8034 -layflat FDAwater hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used Red, wrapped suction/pressure hose with special on building sites for immersion pumps, etc. or compound outer coating which ensures that the where liquids are carried under pressure. hose is exceptionally hard-wearing and weather Normally installed using hose clamps, Bauer or resistant. Double steel helix improves bend Stortz fittings, or similar. Please contact Codan radius. Mainly for use in breweries as flexible for further information. connection between pipelines and tanks or tankers. Vacuum: 90%. Capable of withstanding brief periods of high temperature (120°C) during flushing/cleaning. Available in lengths of 60 m. Normally installed using stainless crimped-on fittings or hose clamps. Please contact Codan for further Ins i de information. Outs i de Worki ng di a . (mm)
25,0 32,0 Ins i de di38,0 a . (mm)
di a . (mm)
31,4 38,4i de Outs di44,4 a . (mm)
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Type nr. 8034 Working Temperature: -30°C to 90°C Application: Beer, Wine etc. Inside: NR/SBR Standard Length: 40 metres Colour: Black Working Temperature: -40°C to 85°C Reinforcement: Polyester Inside: NR Outside: NR/SBR Colour: White Colour: Black Reinforcement: Polyester w/ double steel helix Standards: Outside: CR/SBR Colour: Red Standards: FDA
Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
5
15
250
420
1005025000
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
300 Bend Ra di us (mm) 380
520ght Wei (g/m) 610
1005032000 Product code 1005038000
45,0 25,0
51,4 38,0
5 10
15 30
440 125
700 1.060
1005045000 8034025000
51,0 32,0
57,4 45,0
5 10
15 30
500 160
790 1.300
1005051000 8034032000
63,0 38,0
70,0 52,0
5 10
15 30
630 190
960 1.620
1005063000 8034038000
76,0 40,0
82,4 54,0
5 10
15 30
750 200
1.450 1.680
1005076000 8034040000
102,0 45,0
108,8 59,0
5 10
15 30
1.000 225
1.580 1.880
1005102000 8034045000
110,0 51,0
117,2 65,0
5 10
15 30
1.120 255
1.730 2.140
1005110000 8034051000
127,0 55,0
134,2 70,0
5 10
15 30
1.250 275
2.000 2.330
1005127000 8034055000
152,0 60,0
159,2 76,0
5 10
15 30
1.500 320
2.380 2.700
1005152000 8034060000
203,0 63,0
211,4 79,0
5 10
15 30
2.000 350
3.750 2.940
1005203000 8034063000
254,0 70,0
264,0 86,0
5 10
15 30
2.500 390
5.680 3.250
1005254000 8034070000
76,0
92,0
10
30
450
3.480
8034076000
80,0
96,0
10
30
480
3.700
8034080000
89,0 105,0 10 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
30 535 4.040 8034089000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
90,0
106,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse 4.090 such as excessive bending, crushing, stretching, use 30 540 8034090000 with incorrect media or use in environments outside the hose specification.
102,0
121,0
10
30
Please contact Codan Rubber for individual product manufacturing tolerances.
610
5.560
8034102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the The individual conditions of an application will affect the life time of each product. Therefore please ensure information you need. Written advice must be obtained from Codan Rubber before using any hose with that resistance to chemicals and cleaning procedures in our written product information is complied with. untested media or before using in applications covered inDa thenma productrkdata sheet.Valdemarshaab Codan Rubber Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 1,DK-4600 Køge, Denmark Coda n not Rubber A/S recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any with incorrect media or use in environments outside the hose specification. Fax +45 56 64 All 65products 48 physical damage is seen, especially to the cover of the hose or in the area around the couplings. must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products). Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
FOOD HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan Hose Hose Codan 8035 1005 Food Air / Water
Codan Codan 8035 1005 -- FDA Red, wrapped, high-quality pressure Black, reinforced, layflat water hose.hose Easy with to special compound outer coating which ensures handle and extremely space-saving. Flexible, that hose is exceptionally hard-wearing and eventhe when used at low temperatures. Often used weather resistant. Mainly for use in breweries on building sites for immersion pumps, etc. or as flexible connection between pipelines and tanks where liquids are carried under pressure. or tankers. Capable of withstanding brief periods Normally installed using hose clamps, Bauer or of highfittings, temperature (120°C) during Stortz or similar. Please contact Codan flushing/cleaning. Normally installed using for further information. stainless crimped-on fittings, hose clamps or clamp fittings. Please contact Codan for further information.
Type Type nr. nr. 8035 1005 Application: Wine etc. Application: Beer, Air / Water Hose Standard Standard Length: Length: 40 40 metres metres Working Working Temperature: Temperature: -40°C -30°C to to 85°C 90°C Inside: Inside: NR NR/SBR Colour: Colour: White Black Reinforcement: Reinforcement: Polyester Polyester Outside: Outside: CR/NR NR/SBR Colour: Colour: Red Black Standards: Standards: FDA
Ins i de Ins i de di a . (mm) di a . (mm)
Outs i de Outs i de di a . (mm) di a . (mm)
Worki ng Worki ng Pres s ure BAR Pres s ure BAR
Burs t Burs t Pres s ure BAR Pres s ure BAR
Bend Ra di us Bend Ra di us (mm) (mm)
Wei ght Wei ght (g/m) (g/m)
25,0 13,0 32,0 16,0 38,0 19,0 45,0 25,0 51,0 30,0 63,0 32,0 76,0 35,0 102,0 38,0 110,0 40,0 127,0 45,0 152,0 51,0 203,0 55,0 254,0 60,0
31,4 25,0 38,4 28,0 44,4 31,0 51,4 38,0 57,4 43,0 70,0 45,0 82,4 48,0 108,8 51,0 117,2 53,0 134,2 59,0 159,2 66,0 211,4 70,0 264,0 75,0
5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10
15 30 15 30 15 30 15 30 15 30 15 30 15 30 15 30 15 30 15 30 15 30 15 30 15 30
250 0 300 0 380 0 440 0 500 0 630 0 750 0 1.000 0 1.120 0 1.250 0 1.500 0 2.000 0 2.500 0
420 530 520 620 610 690 700 880 790 1.030 960 1.090 1.450 1.160 1.580 1.250 1.730 1.300 2.000 1.630 2.380 1.820 3.750 1.960 5.680 2.100
Product Product code code
1005025000 8035013000 1005032000 8035016000 1005038000 8035019000 1005045000 8035025000 1005051000 8035030000 1005063000 8035032000 1005076000 8035035000 1005102000 8035038000 1005110000 8035040000 1005127000 8035045000 1005152000 8035051000 1005203000 8035055000 1005254000 8035060000
63,0
78,0
10
30
0
2.190
8035063000
70,0
86,0
10
30
0
2.640
8035070000
76,0
92,0
10
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. 30 0 2.830 8035076000 Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
80,0
96,0
10
with incorrect media or use in environments 30 0 outside the hose specification. 3.000 Please contact Codan Rubber for individual product manufacturing tolerances.
8035080000
89,0
105,0
10
30
8035089000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
90,0 102,0
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
0
3.270
106,0 30 1,DK-4600 Køge, Denmark 0 3.300 8035090000 Coda n Rubber Da nma10 rk A/S Valdemarshaab +45 56 64 65 48 Tel118,0 . +45 56 64 64 64 Fax i nfo@coda n.com URL: www.coda n.com Mail: 10 30 0 3.790 8035102000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure 06/01/2015 that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
FOOD HOSES Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Black, reinforced, layflat water hose. Easy to Codan 8037 Food Hose Flexible, handle and extremely space-saving.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan - iFDA Ins i de 8037 Outs de di a . (mm) di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Blue, wrapped pressure hose for milk and other 25,0foods. 31,4 5 fatty Mainly for use in dairies and on milk 32,0 38,4 5 tankers as flexible connection between pipelines/tanks and 38,0 44,4 5 tankers. It45,0 is recommended with hot 51,4that hoses be flushed 5 5% soda solution before use. Flushing after use 57,4 5 is51,0 also recommended. Normally installed 63,0 70,0using stainless5DIN clamps or hose clamps. 76,0 contact Codan 82,4 for further information. 5 Please 102,0 108,8 5 110,0 127,0
117,2 134,2
5 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
Type nr. 8037 15 Application: Milk 250Hose 420 Standard Length: 40 metres 15 300 520 Working Temperature: -30°C to 80°C 15 Inside: NBR/NR380 610 15 Colour: White 440 700 Reinforcement: Polyester 15 Outside: CR/NR500 790 15 Colour: Blue 630 960 Standards: FDA 15 750 1.450
1005076000
15
1.000
1.580
1005102000
15
1.120
1.730
1005110000
2.000
1005127000
15
1.250
1005025000 1005032000 1005038000 1005045000 1005051000 1005063000
Ins i de di152,0 a . (mm)
Outs i de di159,2 a . (mm)
Worki ng Pres s 5 ure BAR
Burs t Pres s15 ure BAR
Bend Ra di us 1.500 (mm)
Wei ght 2.380 (g/m)
Product
203,0 25,0 254,0 32,0
211,4 37,0 264,0 44,0
5 12 5 12
15 36 15 36
2.000 0 2.500 0
3.750 700 5.680 890
1005203000 8037025000 1005254000 8037032000
38,0
50,0
12
36
0
1.020
8037038000
51,0
63,0
10
30
0
1.340
8037051000
1005152000 code
63,0
75,0
7
21
0
1.610
8037063000
76,0
88,0
7
21
0
1.910
8037076000
102,0
114,0
5
15
0
2.520
8037102000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
FOOD HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 8038 Food Hose Codan 1005 Black, reinforced, layflat water hose. Easy to Type nr. 1005 handle and extremely space-saving. Flexible, Application: Air / Water Hose even when used at low temperatures. Often used Standard Length: 40 metres on building sites for immersion pumps, etc. or Working Temperature: -30°C to 90°C where liquids are carried under pressure. Inside: NR/SBR Normally installed using hose clamps, Bauer or Colour: Black Codan 8038 - FDA Stortz fittings, or similar. Please contact Codan Reinforcement: Polyester for further information. Outside: NR/SBR Blue, wrapped suction/pressure hose with two Type nr. 8038 Colour: Black helixwires. For hot and cold beverages, e.g. beer, Application: Milk Hose Standards: wine, fruit juice and milk. Resistant to most Standard Length: 40 metres vegetable and animal oils. It is recommended Working Temperature: -20°C to 90°C that new hoses be flushed with hot 5% soda Inside: NBR/SBR solution before use. Flushing after use is also Colour: White recommended. Briefi de cleaning: +120°C. Normally steel Ins i de Outs Worki ng BursReinforcement: t Bend Polyester Ra di us - 2Wei ghthelix Product installed clamps stainless Outside: CR (mm) di a . (mm) using distainless a . (mm) DIN Pres s ureor BAR Pres s ure BAR (g/m) code hose clamps tightened with Allen key. Please Colour: Blue contact further information. 25,0 Codan for 31,4 5 15 Standards: FDA250 420 1005025000 32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
440 Bend Ra di us (mm) 500
700ght Wei (g/m) 790
code 1005051000
45,0 Ins i de di51,0 a . (mm)
51,4i de Outs di57,4 a . (mm)
1005045000 Product
63,0 25,0 76,0 32,0
70,0 35,0 82,4 42,4
5 10 5 10
15 30 15 30
630 80 750 100
960 730 1.450 910
1005063000 8038025000 1005076000 8038032000
102,0 38,0 110,0 40,0
108,8 49,0 117,2 51,6
5 10 5 10
15 30 15 30
1.000 120 1.120 130
1.580 1.160 1.730 1.200
1005102000 8038038000 1005110000 8038040000
127,0 42,0 152,0 45,0
134,2 53,6 159,2 56,6
5 10 5 10
15 30 15 30
1.250 150 1.500 160
2.000 1.260 2.380 1.320
1005127000 8038042000 1005152000 8038045000
203,0 51,0 254,0 54,0
211,4 62,0 264,0 65,6
5 10 5 10
15 30 15 30
2.000 200 2.500 220
3.750 1.550 5.680 1.690
1005203000 8038051000 1005254000 8038054000
60,0
72,0
10
30
240
2.050
8038060000
63,0
76,0
10
30
250
2.160
8038063000
76,0
90,0
10
30 300 2.750will affect8038076000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
89,0
105,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 30 330 3.700 8038089000 with incorrect media or use in environments outside the hose specification.
102,0
116,4
10
30
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
400
6.280
8038102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
07/01/2015 The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
FOOD HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Codan 1005 -
Codan 8040 Food Hose Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan 8040 i dehard-wearing Outs i de Worki ng t nr. 8040 Bend Ra di us Wei ght Product AIns very suction/pressure hose. Food BursType di a . (mm)Black di a . (mm) look. Vacuum Pres s ure 70-99%. BAR Pres s ure BAR (mm) Handling (g/m) code quality. wrapped Application: Material - Food quality
Lengths: up to 4" - 40 m; 115 mm – 15 m; 127 and 25,0 152 mm – 25 m;31,4 203 mm – 20 m. 5 32,0 38,4 5
Standard Length: 31 metres 15 Working Temperature: 250 -35°C 420 to 85°C 1005025000
45,0
51,4
5
51,0
57,4
5
63,0
70,0
5
15 Inside: NR 300 520 1005032000 Colour: White 15 380 610 1005038000 Reinforcement: Synthetic Textile yarns and 2 15 steel spiral 440 700 1005045000 Outside: SBR/NR 15 500 790 1005051000 Colour: Black 15 Standards: 630 960 1005063000
82,4
5
15
750
1.450
1005076000
108,8
5
15
1.000
1.580
1005102000
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.120 Bend Ra di us (mm) 1.250
1.730 Wei ght (g/m) 2.000
1005110000 Product
di127,0 a . (mm)
117,2 Outs i de di134,2 a . (mm)
152,0 51,0 203,0 63,0
159,2 65,0 211,4 77,0
5 10 5 10
15 30 15 30
1.500 153 2.000 189
2.380 1.500 3.750 1.830
1005152000 8040051000 1005203000 8040063000
254,0 76,0
264,0 92,0
5 10
15 30
2.500 228
5.680 2.810
1005254000 8040076000
102,0
118,0
10
30
306
3.730
8040102000
115,0
131,0
10
30
460
4.200
8040115000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
76,0
WELDING & GAS
182
102,0 110,0 Ins i de
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
38,0
44,4
5
code 1005127000
143,0 This hose127,0 specification sheet has been prepared with great care in order to provide 10 you with all the information you need.
30 5.130will affect8040127000 of vulcanised Rubber Products). The381 individual conditions of an application the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 30 608 6.010 8040152000 with incorrect media or use in environments outside the hose specification.
152,0
168,0
10
203,0
219,0
5
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
15
812
9.000
8040203000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
FOOD HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan PROJECT Food Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
500
790
1005051000
Codan PROJECT 51,0 57,4 - BGA, kap 5 XXI, kat. 215 63,0Blue, smooth, 70,0flexible hose with 5 BGANEW approved inner 82,4 rubber layer. 76,0 5 Hose is constructed with Aramid reinforcement 108,8 range and to increase 5 to102,0 improve the temp. the pressure rating. 110,0 117,2 5 For hot and cold beverages, e.g. beer, wine, fruit 127,0and milk. 134,2 5 juice Inner and outer surfaces resistant 152,0 to vegetable 159,2 and animal oils. 5 It is recommended that new hoses are flushed 203,0 211,4 5 with 5% soda solution before use. Flushing after 254,0 264,0 5 use is also recommended. Certification can be supplied. Normally installed using stainless connectors or hose clamps. Please contact Codan for further information. This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
15 Type nr. PROJECT 630 960 1005063000 15 Application: Food 750/ Beverages1.450 1005076000 Standard Length: - metres 15 Working Temperature: 1.000 -20°C1.580 to 140°C1005102000 Inside: NBR 15 1.120 1.730 1005110000 Colour: White 15 Reinforcement: 1.250 2.000 1005127000 Aramid 15 Outside: NBR/PVC 1.500 2.380 1005152000 Colour: Blue 15 2.000 3.750 1005203000 Standards: BGA, kap XXI, kat. 2 15 2.500 5.680 1005254000
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
GAS HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
1633
2601
2605
2606
2612
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
2614
2636
2654
INDEX
2656
4084
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
GAS HOSES
Codan 1633 Gas Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
25,0
31,4
5
15
250
420
1005025000
CHEMICAL
65
32,0
38,4
5
15
300
520
1005032000
COOLANT
77
38,0
44,4
5
15
380
610
1005038000
FOOD
87
GAS
99
HYDRAULIC
110
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
45,0 Codan 163351,4 - BS 3212/1:5 1991
51,0 57,4 5 Black LPG/gas tubing, non-reinforced, 63,0 70,0 5 for lowpressure applications. 76,0 Manufactured to82,4 British Standard 5 3212/1:1991. For use in caravans, 102,0 108,8 heaters, etc. 5 Normally installed using hose clamp on brass 110,0 117,2 5 nozzle. Please contact Codan for further information. 127,0 134,2 5
Bend Ra di us (mm)
Wei ght (g/m)
15
440
700
1005045000
15
500
790
1005051000
POWERSTEERING
164
152,0
PVC
167
203,0
211,4
5
15 Type nr. 1633 630 960 Application: LPG / Propane / Butane 15 Standard Length: 75050 metres 1.450 -30°C1.580 to 90°C 15 Working Temperature: 1.000 Inside: NBR 15 Colour: Black 1.120 1.730 Reinforcement: 15 1.250 2.000 Outside: 15 Colour: 1.500 2.380 3212/1: 1991 3.750 15 Standards: BS2.000
STEAM
179
254,0
264,0
5
15
2.500
5.680
WELDING & GAS
182
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
MATERIAL HANDLING 120 OIL
130
PETROL
148
INDEX
159,2
5
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
8,0
14,4
0
9,5
14,0
0
Product code
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Product code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
4
13
165
1633008000
4
13
165
1633010000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
GAS HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2601 Gas Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
25,0 5 15 Codan 260131,4 - EN ISO 3821 / EN 559: 2003 32,0 38,4 5 Flexible, smooth, orange hose for liquefied 38,0 44,4 5 petroleum gas (LPG), propane/butane, to EN ISO 45,0 51,4 5 3821/EN559. In51,0 accordance with 57,4the new EN ISO53821 and EN559, the hose is primarily for use in industrial 63,0 and cutting 70,0 applications. The 5 6.3 mm welding and 11.0 mm hoses 76,0 82,4are DG approved. 5 Please contact Codan for further information. 102,0 108,8 5
15
Bend Ra di us (mm)
Wei ght (g/m)
Product code
250
420
1005025000
300
520
1005032000
110,0
117,2
5
15 Type nr. 2601 380 610 1005038000 Application: LPG / Propane / Butane 15 Standard Length: 44050 metres 700 1005045000 -30°C 790 to 80°C 1005051000 15 Working Temperature: 500 Inside: NBR 15 Colour: Black 630 960 1005063000 Ester 15 Reinforcement: 750 1.450 1005076000 Outside: EPDM 15 1.000 1.580 1005102000 Colour: Orange ISO 3821 / EN 1.730 559: 20031005110000 15 Standards: EN1.120
127,0
134,2
5
15
1.250
2.000
1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de di254,0 a . (mm)
211,4 Outs i de di264,0 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
2.000 Bend Ra di us (mm) 2.500
3.750 Wei ght (g/m) 5.680
1005203000 Product code 1005254000
5,0
11,4
20
60
40
116
2601005000
6,3
13,3
20
60
40
141
2601006000
8,0
15,0
20
60 173 will affect2601008000 of vulcanised Rubber Products). The40 individual conditions of an application the life time of each product.
10,0
17,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 50 203 2601010000 with incorrect media or use in environments outside the hose specification.
11,0
18,0
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
55
221
2601011000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
GAS HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2605 Gas Hose Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
31,4
Product code
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
15
500
790
1005051000
15 Type nr. 2605 630
960
1005063000
Codan 260557,4 - DG 2240 51,0
5
63,0 orange,70,0 5 Flexible, high-pressure liquid-gas hose for butane and propane. For use with 76,0 82,4 5 highpressure regulators for portable gas-consuming 102,0 108,8 5 equipment. Approved Danish gas testing5 authority 110,0 by the117,2 (Dansk Gasprøvningsinstitut) in accordance with 127,0 134,2 5 DG standard 2240. 152,0 contact 159,2 5 Please Codan for further information. 203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
14,3
1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product vulcanised Rubber Products). The(mm) individual conditions of an application of each product. Pres sofure BAR (g/m)will affect the life timecode
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,3
/ Propane / 1.450 Butane 15 Application: LPG 750 Standard Length: 50 metres 15 Working Temperature: 1.000 -20°C1.580 to 70°C 15 Inside: NBR 1.120 1.730 Colour: Black 15 1.250 2.000 Reinforcement: Ester 15 Outside: NBR/PVC 1.500 2.380 Colour: Orange 15 2.000 3.750 Standards: DG 2240 15 2.500 5.680
30
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
88
67
200
2605006000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
GAS HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2606 Gas Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
5
15
500
790
1005051000
Codan 260657,4 - DG 2240 51,0
63,0 orange,70,0 5 Flexible, high-pressure liquid-gas hose for butane and propane. For use with 76,0 82,4 5 highpressure regulators for portable gas-consuming 102,0 108,8 by the Danish5 gas testing equipment. Approved authority (Dansk Gasprøvningsinstitut) in 110,0 117,2 5 accordance with DG standard 2240. Special 127,0 Produced 134,2Hose. 5 Costumer 152,0 159,2 5 203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
14,3
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,3
15 Type nr. 2606 630 960 / Propane / 1.450 Butane 15 Application: LPG 750 Standard Length: 50 metres 15 Working Temperature: 1.000 -20°C1.580 to 70°C Inside: NBR 15 1.120 1.730 Colour: Black 15 Reinforcement: 1.250 2.000 PVA 15 Outside: NBR/PVC 1.500 2.380 Colour: Orange 15 2.000 3.750 Standards: DG 2240 15 2.500 5.680
50
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
125
0
200
2606006000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
GAS HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2612 Gas Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
5
15
500
790
1005051000
Codan 261257,4 - DG 2239 51,0
63,0 low-pressure 70,0 liquid-gas hose 5 for LPG Orange, (butane/propane). Often used to connect gas 76,0 82,4 5 cylinder to gas-consuming device, e.g. portable 102,0 5 the Danish barbecues and 108,8 heaters. Approved by gas testing authority (Dansk 110,0 117,2 5 Gasprøvningsinstitut) for low-pressure 127,0 134,2 5 2239. applications in accordance with DG Please Codan for further information. 152,0 contact 159,2 5 203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
15 Type nr. 2612 630 960 / Propane / 1.450 Butane 15 Application: LPG 750 Standard Length: 50 metres 15 Working Temperature: 1.000 -20°C1.580 to 70°C Inside: NBR 15 1.120 1.730 Colour: Black 15 Reinforcement: 1.250 Polyester 2.000 15 Outside: NBR/PVC 1.500 2.380 Colour: Orange 15 2.000 3.750 Standards: DG 2239 15 2.500 5.680
18,0
1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
11,0
1005063000 1005076000
2
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
10
38
232
2612011000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
GAS HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2614 Gas Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
25,0
31,4
5
15
250
420
1005025000
COOLANT
77
32,0
38,4
5
15
300
520
1005032000
FOOD
87
15
380
610
1005038000
GAS
99
15
440
700
HYDRAULIC
110
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
38,0 5 Class 2 Codan 261444,4 - EN 16436-1
45,0 51,4 5 Flexible, orange hose for liquefied 51,0 smooth, 57,4 5 petroleum gas (LPG), propane/butane, to EN 63,0 Class 2.70,0 5 for use in 16436-1 The hose is primarily assemblies of LPG applications. 76,0 82,4 5 For use with barbecues, patio heaters, caravan 102,0 108,8 5 installations and weed burners. Please Codan for further information. 110,0 contact 117,2 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
1005045000
OIL
130
PETROL
148
POWERSTEERING
164
127,0
134,2
5
PVC
167
152,0
159,2
5
15 Type nr. 2614 500 790 Application: LPG / Propane / Butane 15 Standard Length: 63050 metres 960 Working Temperature: -30°C1.450 to 80°C 15 750 Inside: NBR 15 Colour: Black 1.000 1.580 Reinforcement: Ester 15 1.120 1.730 Outside: EPDM 15 Colour: Orange 1.250 2.000 16436-1 Class2.380 2 15 Standards: EN1.500
STEAM
179
203,0
211,4
5
15
2.000
3.750
1005203000
WELDING & GAS
182
254,0
264,0
5
15
2.500
5.680
1005254000
MATERIAL HANDLING 120
INDEX
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
4,0
11,0
10
6,0
13,0
10
9,0
16,0
10
Burs t Pres s ure BAR
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Bend Ra di us (mm)
1005051000 1005063000 1005076000 1005102000 1005110000 1005127000 1005152000
Wei ght (g/m)
Product code
30
35
110
2614004
30
40
141
2614006
30
45
195
2614009
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2636 Gas Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Codan 263631,4 - BS 3212: 1991 type 2 25,0 5 32,0 liquid-gas 38,4hose for butane5and propane, Orange, to38,0 BS3212:199144,4 type 2. For use with 5 gas-fuelled leisure appliances, e.g. barbecues and heaters. 45,0 contact Codan 51,4 for further information. 5 Please 51,0 57,4 5
15
Bend Ra di us (mm)
Wei ght (g/m)
250
420
63,0
70,0
5
76,0
82,4
5
102,0
108,8
5
110,0
117,2
5
15 Type nr. 2636 300 520 / Propane / Butane 15 Application: LPG 380 610 Standard Length: 50 metres 15 Working Temperature: 440 -20°C 700 to 80°C Inside: NBR 15 500 790 Colour: Black 15 Reinforcement: 630 960 PVA 15 Outside: CR 750 1.450 Colour: Orange 15 1.000 1.580 Standards: BS 3212: 1991 type 2 15 1.120 1.730
134,2
5
15
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
127,0
WELDING & GAS
182
152,0
INDEX
GAS HOSES
159,2
5
15
1.250 1.500
Product code
1005025000 1005032000 1005038000 1005045000 1005051000 1005063000 1005076000 1005102000 1005110000
2.000
1005127000
2.380
1005152000
di203,0 a . (mm)
Ins i de
Outs i de di211,4 a . (mm)
Worki ng Pres s 5 ure BAR
Burs t Pres s15 ure BAR
Bend Ra di us 2.000 (mm)
Wei ght 3.750 (g/m)
Product
254,0 4,0
264,0 10,4
5 18
15 52
2.500 36
5.680 106
1005254000 2636004000
4,8
11,6
18
52
58
115
2636005000
65
137
2636006000
1005203000 code
6,3
13,1
18
52
8,3
15,5
18
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. 52 76 178 2636008000 Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
9,5
17,3
18
with incorrect media or use in environments 52 60outside the hose specification.239 Please contact Codan Rubber for individual product manufacturing tolerances.
2636010000
12,7
20,5
18
52
2636013000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
72
293
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
GAS HOSES
Codan 2654 Gas Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
25,0
CHEMICAL
65
32,0
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
31,4
5
15
250
420
1005025000
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
51,0
57,4
5
15
500
790
1005051000
Codan 2654 - EN ISO 3821 / EN 16436-1 Flexible, orange hose for liquefied 63,0 smooth, 70,0 5 petroleum gas (LPG), propane/butane, to EN ISO 76,0 82,4 5 3821 and EN 16436. The hose is primarily for use of102,0 assemblies of LPG applications.5Further to 108,8 this, all sizes are DG approved. Please contact 110,0 117,2 5 Codan for further information. 127,0 134,2 5 152,0
159,2
5
203,0
211,4
5
15 Type nr. 2654 630 960 Application: LPG / Propane / Butane 15 Standard Length: 75050 metres 1.450 -30°C1.580 to 80°C 15 Working Temperature: 1.000 Inside: NBR 15 1.120 1.730 Colour: Black Ester 15 Reinforcement: 1.250 2.000 Outside: EPDM 15 1.500 2.380 Colour: Orange 15 Standards: EN2.000 ISO 3821 / EN 3.750 16436-1
254,0
264,0
5
15
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
4,0
12,0
30
6,0
16,0
30
2.500
Bend Ra di us (mm)
5.680
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Wei ght (g/m)
Product code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
90
35
120
2654004
90
45
185
2654006
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
GAS HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
Codan 2656 Gas Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
Codan 265657,4 - BS 3212/2 5: 1991 51,0 63,0 70,0 5 Black smooth rubber hose for high pressure LPG. 76,0 82,4 Gas. Hose also5 named in the Approved acc. Calor market 102,0 as the pigtail 108,8 hose. Used for5 connection between bottels, often with a splitter to several 110,0 117,2 5 bottels. Please contact Codan for further information. 127,0 134,2 5 152,0
159,2
5
164
203,0
211,4
5
PVC
167
254,0
264,0
5
STEAM
179
WELDING & GAS
182
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
INDEX
Burs t Pres s ure BAR
15,0
440
700
1005045000
500
790
1005051000
15
630 960 Type nr. 2656 15 Application: LPG 750 / Propane / 1.450 Butane 50 metres 1.580 15 Standard Length: 1.000 Working Temperature: -30°C to 70°C 15 Inside: NBR 1.120 1.730 Colour: Black 15 1.250 2.000 Reinforcement: Polyester 15 Outside: EPDM 1.500 2.380 Colour: Black 15 2.000 3.750 Standards: BS 3212/2 : 1991 15 2.500 5.680
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Pres sofTherefore ure BAR (mm) (g/m) code please ensure that resistance to chemicals and cleaning procedures in our written product information is
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
6,3
15 15
18
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
117 62product manufacturing tolerances. 204 Please contact Codan Rubber for individual
2656006000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
GAS HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 4084 Gas Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
500
790
1005051000
Codan 408457,4 - EN1763-1:2000 & DG0553 51,0 5 15 63,0 LPG/Gas tubing, 70,0 non-reinforced, 5 for Black lowpressure applications. Manufactured to 76,0 82,4 5 EN1763-1:2000 and is DG0553 approved. 102,0 108,8 5 For use in testequipment and laboratories. The working pressure for this hose 110,0 117,2 5is 0.1 bar. Normally installed using hose clamp on brass 127,0 Please contact 134,2 Codan for further 5 nozzle. information. 152,0 159,2 5 203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
15 Type nr. 4084 630 960 1005063000 / Propane / 1.450 Butane 1005076000 15 Application: LPG 750 Standard Length: metres 15 Working Temperature: 1.000 -30°C1.580 to 90°C 1005102000 Inside: NBR 15 1.120 1.730 1005110000 Colour: Black 15 Reinforcement: 1.250 2.000 1005127000 15 Outside: NBR 1.500 2.380 1005152000 Colour: Black 15 Standards: EN1763-1:2000 2.000 &3.750 DG0553 1005203000 15 2.500 5.680 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m) vulcanised Rubber Products). The (mm) individual conditions of an application will affect the life timecode of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
9,5
14,0
0
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
4
13
165
408470003
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
HYDRAULIC HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
3024
3501
3512
3514
3516
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
3550
3581
3582
INDEX
3583
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
HYDRAULIC HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 3024 Hydraulic Hose Codan 1005 Black, reinforced, layflat water hose. Easy to Type nr. 1005 handle and extremely space-saving. Flexible, Application: Air / Water Hose even when used at low temperatures. Often used Standard Length: 40 metres on building sites for immersion pumps, etc. or Working Temperature: -30°C to 90°C where liquids are carried under pressure. Inside: NR/SBR Normally installed using hose clamps, Bauer or Colour: Black Codan 3024 - Stortz fittings, or similar. Please contact Codan Reinforcement: Polyester for further information. Outside: NR/SBR Black, flexible hose for hydraulic oils, diesel oil, Type nr.Black 3024 Colour: etc. Capable of withstanding temperatures of Application: Standards: Low-pressure Hydraulics max. +140°C for brief periods, making it ideal for Standard Length: 50 metres oil cooling on high-performance cars, Working Temperature: -40°C to 125°C motorcycles, boats, etc. Inside: NBR Crimped-on low-pressure fittings are Colour: Black recommended for this Ins i de Outs i de hose type. Worki ng BursReinforcement: t Bend Ester Ra di us Wei ght Product Please contactdiCodan for further Outside: CR (mm) di a . (mm) a . (mm) Presinformation. s ure BAR Pres s ure BAR (g/m) code Colour: Black 25,0 31,4 5 15 Standards: - 250 420 1005025000 32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
Ins i de di51,0 a . (mm)
Outs i de di57,4 a . (mm)
Worki ng Pres s 5 ure BAR
Burs t Pres s15 ure BAR
Bend Ra di us (mm) 500
Wei ght (g/m) 790
code 1005051000
63,0 4,0 76,0 6,0 102,0 8,0
70,0 10,2 82,4 12,4 108,8 14,4
5 25 5 25
15 75 15 75 15 75
630 30 750 36 1.000 42
960 99 1.450 132 1.580 160
1005063000 3024004000 1005076000 3024006000 1005102000 3024008000
110,0 9,0 127,0 9,5
117,2 15,4 134,2 15,9
15 75 15 75
1.120 45 1.250 46
1.730 174 2.000 181
1005110000 3024009000 1005127000 3024095000
152,0 10,0 203,0 11,0
159,2 16,4 211,4 18,2
15 75 15 55
1.500 48 2.000 54
2.380 187 3.750 235
1005152000 3024010000 1005203000 3024011000
254,0 12,0
264,0 20,2
15 42
2.500 60
5.680 295
1005254000 3024012000
5 25 5 25 5 25 5 25 5 18 5 14
Product
13,0
22,0
14
42
66
351
3024013000
15,0
24,0
14
42
72
391
3024015000
16,0
25,0
14
42 410 will affect3024016000 of vulcanised Rubber Products). The75 individual conditions of an application the life time of each product.
20,0
30,0
12
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 36 90outside the hose specification.557 3024020000 with incorrect media or use in environments
28,0
40,0
12
36
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
120
904
3024028000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
06/01/2015 The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
HYDRAULIC HOSES Codan 1005 -
Codan 3501 Hydraulic Hose Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
Codan 3501 - SAE 100 R3
GAS
99
Ins i de Outs i de Worki ng Black hydraulic with fabric for di a . (mm) di ahose . (mm) Presinsert s ure BAR
HYDRAULIC
110
MATERIAL HANDLING 120
Wei ght (g/m)
Product code
5
Application: Low-pressure Hydraulics 15 Standard Length: 25050 metres 420 1005025000 Working Temperature: -40°C to 100°C 15 Inside: NBR 300 520 1005032000 15 Colour: Black 380 610 1005038000 Reinforcement: PVA 15 Outside: CR 440 700 1005045000 15 Colour: Black 500 790 1005051000 Standards: SAE 100 R3 15 630 960 1005063000
82,4
5
15
750
1.450
1005076000
108,8
5
15
1.000
1.580
1005102000
Outs i de 117,2 di a . (mm)
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 1.120 (mm)
Wei ght 1.730 (g/m)
Product 1005110000
2.000 162 2.380
1005127000 3501005000 1005152000
6,3 203,0 7,9 254,0
14,7 211,4 17,5 264,0
88 5 84 5
350 15 335 15
59 2.000 70 2.500
189 3.750 263 5.680
3501006000 1005203000 3501008000 1005254000
9,5
19,1
79
315
77
296
3501010000
12,7
23,9
70
280
96
440
3501013000
241
108
506
3501016000
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
76,0
182
102,0 Ins i de 110,0 di a . (mm)
INDEX
Burs t Bend Ra di us Type Pres s ure BARnr. 3501 (mm)
hydraulic fluids. For use as return hose in hydraulic systems, 25,0 31,4but also suitable 5 for mediumpressure systems. 32,0 38,4are recommended 5 at Crimped-on fittings pressures higher44,4 than 20 bar and temperatures 38,0 5 higher than 23°C. 45,0 contact Codan 51,4 for further information. 5 Please 51,0 57,4 5
OIL
WELDING & GAS
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
63,0
127,0 4,8 152,0
15,9
70,0
134,2 13,2 159,2
27,0
5 105 5
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
15 420 15
1.250 52 1.500
code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
19,1
31,7
52
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is 210 127 689 3501019000 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
25,4
38,0
40
Please contact Codan Rubber for individual product manufacturing tolerances. 155 152 856
with incorrect media or use in environments outside the hose specification.
3501025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
HYDRAULIC HOSES Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan Hydraulic Hose Black,3512 reinforced, layflat water hose. Easy to
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan 3512 - SAE 100 R6
Ins i de Outs i de Worki ng Burs t Bend Ra di us di a . (mm) di ahose . (mm) Presinsert s ure BAR BARnr. 3512 (mm) Black hydraulic with fabric ideal forPres s ure Type
hydraulic oils, diesel oil, etc. 25,0 31,4 5 For use as return hose in hydraulic systems. Also 32,0 for use38,4 suitable as pressure hose, 5 e.g. for oil cooling 38,0 in internal 44,4combustion engines. 5 Normally installed using hose clamps or 45,0 51,4 crimped-on low-pressure fittings. 5 Please contact Codan for further information. 51,0 57,4 5
Wei ght (g/m)
Product code
63,0
70,0
5
76,0
82,4
5
Application: Low-pressure Hydraulics 250 420 1005025000 Standard Length: 50 metres 15 Working Temperature: 300 -40°C 520 to 120°C1005032000 15 Inside: NBR 380 610 1005038000 Colour: Black 15 Reinforcement: 440 700 1005045000 PVA Outside: CR/SBR 15 500 790 1005051000 Colour: Black 15 Standards: SAE630 960 1005063000 100 R6 15 750 1.450 1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
15
Ins i de di127,0 a . (mm)
Outs i de di134,2 a . (mm)
Worki ng Pres s 5 ure BAR
Burs t Pres s15 ure BAR
Bend Ra di us 1.250 (mm)
Wei ght 2.000 (g/m)
Product
152,0 4,8 203,0 6,4
159,2 11,1 211,4 12,7
5 34 5 28
15 138 15 110
1.500 50 2.000 63
2.380 111 3.750 134
1005152000 3512005000 1005203000 3512006000
254,0 7,9
264,0 14,3
5 28
15 110
2.500 75
5.680 158
1005254000 3512008000
9,5
15,9
28
110
75
181
3512010000
12,7
19,8
28
110
100
257
3512013000
1005127000 code
15,9
23,0
24
of vulcanised Rubber Products). The individual conditions of an application the life time of each product. 97 125 308 will affect3512016000
19,1
27,0
21
82 135outside the hose specification.408 with incorrect media or use in environments
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
25,4
35,0
20
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use Please contact Codan Rubber for individual product manufacturing tolerances.
80
175
647
3512019000
3512025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
HYDRAULIC HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, Codan 3514 Hydraulic Hose even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de Outs i de Codan SAE di a . (mm) 3514 di a .-(mm)
Worki ng
100 R6 Pres s ure BAR
Burs t Pres s ure BAR
25,0 high-temperature 31,4 Black, hydraulic 5hose with fabric insert ideal for hydraulic oils, 32,0 38,4 5 diesel oil, etc. 38,0 44,4 For use as return hose in hydraulic5 systems. Also suitable for use as e.g. for oil 45,0 51,4pressure hose, 5 cooling in internal combustion engines. 51,0 57,4are recommended. 5 Crimped-on fittings Please 63,0 contact Codan 70,0 for further information. 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
76,0
82,4
5
102,0
108,8
5
15 Type nr. 3514 250 420 1005025000 Application: Low-pressure Hydraulics 15 300 520 1005032000 Standard Length: 50 metres 15 Working Temperature: 380 610 1005038000 -40°C to 135°C 15 Inside: NBR 440 700 1005045000 Colour: Black 15 Reinforcement: 500 790 1005051000 PVA 15 Outside: CPE 630 960 1005063000 Colour: Black 15 Standards: SAE750 1.450 1005076000 100 R6 15 1.000 1.580 1005102000
110,0
117,2
5
15
127,0
134,2
5
15
1.120 1.250
1.730
1005110000
2.000
1005127000
Ins i de di152,0 a . (mm)
Outs i de di159,2 a . (mm)
Worki ng Pres s 5 ure BAR
Burs t Pres s15 ure BAR
Bend Ra di us 1.500 (mm)
Wei ght 2.380 (g/m)
203,0 4,8 254,0 6,4
211,4 11,1 264,0 12,7
5 34 5 28
15 138 15 110
2.000 50 2.500 63
3.750 117 5.680 141
Product
1005152000 code 1005203000 3514005000 1005254000 3514006000
7,9
14,3
28
110
75
165
3514008000
9,5
15,9
28
110
75
188
3514010000
12,7
19,8
28
of vulcanised Rubber Products). The individual conditions of an application the life time of each product. 110 100 268 will affect3514013000 Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
15,0
22,0
24
with incorrect media or use in environments 97 119outside the hose specification.310
3514015000
15,9
23,0
24
97
3514016000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use Please contact Codan Rubber for individual product manufacturing tolerances.
125
320
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
HYDRAULIC HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3516 Hydraulic Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Codan 3516 - CNOMO E07.21.115.N 25,0 31,4 5 Red, smooth, low-pressure, "PUSH-ON" 32,0 38,4 5 hydraulic hose. PN3A. Manufactured to CNOMO 38,0 44,4 5 stringent E07.21.115N, and complies with the pull-off/push-on requirements stated 45,0 51,4 5 in the standard. For use as air hose on robotic 51,0 5 equipment, etc.,57,4 and for water/oil emulsions both as pressure and return hose. Also available 63,0 70,0 5 in green. 76,0 push-on 82,4 5 Codan fittings are recommended. Please Codan for further information. 102,0 contact 108,8 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
15
250 420 1005025000 Type nr. 3516 15 300 520 1005032000 Application: Low-Pressure Hydraulics / Push-On 15 Standard Length: 38050 metres 610 1005038000 -20°C 700 to 90°C 1005045000 15 Working Temperature: 440 Inside: NBR/PVC 15 Colour: Black 500 790 1005051000 Reinforcement: PVA 15 630 960 1005063000 Outside: NBR/PVC 15 Colour: Red 750 1.450 1005076000 15 Standards: CNOMO 1.000 E07.21.115.N 1.580 1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0
134,2
5
15
1.250
2.000
1005127000
152,0 Ins i de di203,0 a . (mm)
159,2 Outs i de di211,4 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.500 Bend Ra di us (mm) 2.000
2.380 Wei ght (g/m) 3.750
1005152000 Product
254,0 4,0
264,0 10,2
5 12
15 83
2.500 45
5.680 90
1005254000 3516040000
6,7
13,0
12
83
63
127
3516067000
10,0
16,4
12
83
75
174
3516100000
code 1005203000
20,3 This hose 13,3 specification sheet has been prepared with great care in order to provide 12 you with all the information you need.
83 242 will affect3516133000 of vulcanised Rubber Products). The100 individual conditions of an application the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
16,3
23,3
12
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 83 125 285 3516163000 with incorrect media or use in environments outside the hose specification.
19,4
26,6
12
70
Please contact Codan Rubber for individual product manufacturing tolerances.
140
340
3516194000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
HYDRAULIC HOSES Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Black, reinforced, layflat water hose. Easy to Codan 3550 Hydraulic Hose handle and extremely space-saving. Flexible,
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan - iSAE Ins i de 3550 Outs de di a . (mm) di a . (mm)
100 Worki R4 ng Pres s ure BAR
Burs t Pres s ure BAR
Black, wrapped, flexible, dimensionally stable 25,0for use as return 31,4 hose in hydraulic 5 hose systems. Also suitable as standard suction/pressure hose 32,0 38,4 5 for industrial applications. Double steel helix 38,0 the hose 44,4 5 makes ideal for use in confined areas. Vacuum: 45,0 Decreasing 51,4 90-40%. 5 Normally installed using heavy-duty hose 51,0 tightened 57,4 clamps with Allen key or 5DIN clamps. Please 63,0 contact Codan 70,0 for further information. 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
76,0
82,4
5
Type nr. 3550 15 Application: Low-pressure 250 420 1005025000 Hydraulics Standard Length: 40 metres 15 300 520 1005032000 Working Temperature: -30°C to 100°C 15 Inside: NBR 380 610 1005038000 15 Colour: Black 440 700 1005045000 Reinforcement: Polyester 15 Outside: CR 500 790 1005051000 15 Colour: Black 630 960 1005063000 Standards: SAE 100 R4 15 750 1.450 1005076000
STEAM
179
102,0
108,8
5
15
1.000
1.580
1005102000
182
110,0
117,2
5
15
1.120
1.730
1005110000
Ins i de 127,0 di a . (mm)
Outs i de 134,2 di a . (mm)
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 1.250 (mm)
Wei ght 2.000 (g/m)
Product 1005127000
2.380 740 3.750
1005152000 3550019000 1005203000
25,4 254,0 32,0
37,0 264,0 44,0
17 5 14
69 15 55
152 2.500 203
900 5.680 1.120
3550025000 1005254000 3550032000
38,0
51,2
10
41
254
1.370
3550038000
51,0
63,8
7
27
305
1.815
3550051000
MATERIAL HANDLING 120
WELDING & GAS INDEX
152,0 19,1 203,0
159,2 31,0 211,4
5 20 5
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
15 82 15
1.500 127 2.000
code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
63,0
77,0
4
17
356
2.505
3550063000
76,0
90,0
3
15
457
2.960
3550076000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
HYDRAULIC HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Codan 1005Hydraulic Codan 3581 Hose Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3581 - DIN 20022 1SN Black, hydraulic hose.Worki Manufactured to BursType Ins i dewrappedOuts i de ng t nr. 3581 Bend Ra di us Wei ght Product DIN 20022 1SN with single layer of braided steel Application: High-Pressure Hydraulics di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR (mm) (g/m) code to ensure compliance with the pressure impulse Standard Length: 50 metres requirements stated -40°C 420 to 100°C1005025000 25,0 31,4 in the standard. 5 For 15 Working Temperature: 250 hydraulic fluids based on mineral oils and Inside: NBR 32,0 38,4and oil. 5 15 Colour: Black 300 520 1005032000 emulsions of water Illustration varies from actual product. Reinforcement: One steel wire braid 38,0 44,4 5 15 380 610 1005038000 Fits standard hydraulic connectors. Outside: CR 45,0 51,4 5 15 440 700 1005045000 Available in lengths from 5 to <50 m. Colour: Black Please 20022 1SN 790 51,0 contact Codan 57,4 for further information. 5 15 Standards: DIN500 1005051000 63,0
70,0
5
15
630
960
1005063000
76,0
82,4
5
15
750
1.450
1005076000
102,0 Ins i de di110,0 a . (mm)
108,8 Outs i de di117,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.000 Bend Ra di us (mm) 1.120
1.580 Wei ght (g/m) 1.730
1005102000 Product
127,0 6,4
134,2 13,4
5 200
15 900
1.250 100
2.000 0
1005127000 3581006000
152,0 7,9
159,2 15,0
5 215
15 850
1.500 115
2.380 0
1005152000 3581008000
203,0 9,5
211,4 17,4
5 180
15 720
2.000 130
3.750 0
1005203000 3581010000
254,0 12,7
264,0 20,6
5 160
15 640
2.500 180
5.680 0
1005254000 3581013000
15,9
23,7
130
520
200
0
3581016000
19,1
27,7
105
420
240
0
3581019000
code 1005110000
35,6 88with all the information you need. 350 0 will affect3581025000 of vulcanised Rubber Products). The300 individual conditions of an application the life time of each product. This hose 25,4 specification sheet has been prepared with great care in order to provide you Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
31,8
43,5
63
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 250 420 0 3581032000 with incorrect media or use in environments outside the hose specification.
38,1
50,6
50
200
Please contact Codan Rubber for individual product manufacturing tolerances.
500
0
3581038000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
HYDRAULIC HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Codan 3582 Hose Codan 1005Hydraulic Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3582 - DIN 20022 2SN Black, wrapped hydraulic hose. Manufactured to Type nr. 3582 Ins i20022 de Worki ng t Bend Ra di us Wei ght Product DIN 2SNOuts withi de double layer of braided steel BursApplication: High-Pressure Hydraulics di . (mm) compliance di a . (mm) s ure BAR BAR (mm) code toaensure with thePres pressure impulsePres s ure Standard Length: 50 metres (g/m) requirements stated in the standard. For Working Temperature: -40°C to 100°C 25,0 15 Inside: NBR 250 420 1005025000 hydraulic fluids31,4 based on mineral 5oils and emulsions of water 32,0 38,4and oil. 5 15 Colour: Black 300 520 1005032000 Illustration varies from actual product. Reinforcement: Double steel wire braid 38,0 44,4 from 5 to <50 5 15 Outside: CR 380 610 1005038000 Available in lengths m. Fits standard hydraulic connectors. 45,0 51,4 5 15 Colour: Black 440 700 1005045000 Please contact Codan for further information. Standards: DIN 20022 2SN 51,0 57,4 5 15 500 790 1005051000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
63,0
70,0
5
15
630
960
1005063000
182
76,0
82,4
5
15
750
1.450
1005076000
WELDING & GAS INDEX
Ins i de 102,0 di a . (mm)
Outs i de 108,8 di a . (mm)
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 1.000 (mm)
Wei ght 1.580 (g/m)
Product 1005102000
1.730 0 2.000
1005110000 3582006000 1005127000
7,9 152,0 9,5 203,0
16,6 159,2 19,0 211,4
350 5 330 5
1400 15 1320 15
115 1.500 130 2.000
0 2.380 0 3.750
3582008000 1005152000 3582010000 1005203000
12,7 254,0 15,9
22,2 264,0 25,4
275 5 250
1100 15 1000
180 2.500 200
0 5.680 0
3582013000 1005254000 3582016000
19,0
29,3
215
850
240
0
3582019000
25,4
38,1
165
650
300
0
3582025000
110,0 6,4 127,0
117,2 15,0 134,2
5 400 5
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
15 1600 15
1.120 100 1.250
code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
31,8
48,3
125
500
420
0
3582032000
38,1
54,6
90
360
500
0
3582038000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
HYDRAULIC HOSES Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Black, reinforced, layflat water hose. Easy to Codan 3583 Hydraulic Hose handle and extremely space-saving. Flexible,
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan - iEN Ins i de 3583 Outs de di a . (mm) di a . (mm)
857 1SC Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Black wrapped hydraulic hose with steel wire 25,0 reinforcement 31,4 according EN 5 braid 857 1SC. Suitable to transfer 32,0 38,4hydraullic fluids. 5 mineral oils, fuels, hydrocarbons, etc. The 1 SC hose is 38,0flexible than 44,4 5 1SN hose more the standard DIN and is used on places 45,0 51,4 where small5bend radius is needed. 51,0 57,4 from 5 to <50 5 Available in lengths m. Fits standard hydraulic connectors. 63,0 70,0 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
76,0
82,4
5
Type nr. 3583 15 Application: High 250Pressure Hydraulics 420 1005025000 Standard Length: metres 15 300 520 1005032000 Working Temperature: -40°C to 100°C 15 Inside: NBR 380 610 1005038000 15 Colour: Black 440 700 1005045000 Reinforcement: One high tensile steel wire braid 15 Outside: CR 500 790 1005051000 15 Colour: Black 630 960 1005063000 Standards: EN 857 1SC 15 750 1.450 1005076000
STEAM
179
102,0
108,8
5
15
1.000
1.580
1005102000
182
110,0
117,2
5
15
1.120
1.730
1005110000
Ins i de 127,0 di a . (mm)
Outs i de 134,2 di a . (mm)
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 1.250 (mm)
Wei ght 2.000 (g/m)
Product 1005127000
2.380 184 3.750
1005152000 3583006000 1005203000
7,9 254,0 9,5
14,1 264,0 16,1
215 5 180
860 15 720
85 2.500 90
216 5.680 281
3583008000 1005254000 3583010000
12,7
19,3
160
640
130
360
3583013000
15,9
22,6
130
520
150
435
3583016000
MATERIAL HANDLING 120
WELDING & GAS INDEX
152,0 6,4 203,0
159,2 12,4 211,4
5 225 5
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
15 900 15
1.500 75 2.000
code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
19,1
25,9
105
420
180
503
3583019000
25,4
33,8
88
352
230
768
3583025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
MATERIAL HANDLING HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
1243
1600
1605
1701
1703
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
1705
2700
2703
INDEX
2710
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
MATERIAL HANDLING HOSES Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Black, reinforced, layflat water hose. Easy to Type nr. 1005 Codan 1243 Material Handling Hose handle and extremely space-saving. Flexible, Application: Air / Water Hose even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de 1243 Outs Codan - i-de di a . (mm) di a . (mm)
Worki ng Pres s ure BAR
Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Burs t Pres s ure BAR
Black, wrapped pressure hose with very sturdy, 25,0hard-wearing, 31,4 anti-static inner 5 rubber extra layer long service life.5 Weather32,0that ensures 38,4 resistant, hard-wearing outer rubber layer. For 38,0 44,4 industry for5 injecting wet use in the construction grout, 45,0 mixed concrete 51,4 and other wet, 5 abrasive materials. Also suitable for plaster, etc. 51,0 57,4 5 Please contact Codan for further information. 63,0 70,0 5
Bend Ra di us (mm)
Wei ght (g/m)
Type nr. 1243 15 Application: Concrete 250 / Grout 420 Hose
Product code
1005025000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
76,0
82,4
5
15 Standard Length: 30040 metres 520 1005032000 Working Temperature: -20°C to 70°C 15 380 610 1005038000 Inside: NR 15 Colour: Black 440 700 1005045000 Reinforcement: Polyester - Anti-static wire 15 500 790 1005051000 Outside: SBR 15 Colour: Black 630 960 1005063000 Standards: 15 750 1.450 1005076000
STEAM
179
102,0
108,8
5
15
1.000
1.580
1005102000
WELDING & GAS
182
110,0
117,2
5
15
1.120
1.730
1005110000
Ins i de 127,0 di a . (mm)
Outs i de 134,2 di a . (mm)
Worki 5 ng Pres s ure BAR
Burs 15 t Pres s ure BAR
Bend Ra di us 1.250 (mm)
Wei ght 2.000 (g/m)
Product 1005127000
2.380 655 3.750
1005152000 1243019000 1005203000
25,0 254,0 32,0
38,2 264,0 46,0
40 5 40
140 15 140
0 2.500 0
810 5.680 1.300
1243025000 1005254000 1243032000
35,0
49,4
40
140
0
1.390
1243035000
38,0
53,6
40
140
0
1.440
1243038000
MATERIAL HANDLING 120
INDEX
152,0 19,0 203,0
159,2 31,5 211,4
5 40 5
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
15 140 15
1.500 0 2.000
code
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
51,0
68,6
40
140
0
2.100
1243051000
63,0
85,4
40
140
0
3.270
1243063000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
MATERIAL HANDLING HOSES Codan 1005 -
Codan Material Handling Hose Black,1600 reinforced, layflat water hose. Easy to Type nr. 1005
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
Codan 1600 - -
GAS
99
Ins i de Outs i de Worki ng di a . (mm) a . (mm) pressure Pres shose ure BAR Black, flexible,diwrapped with
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Burs t Bend Ra di us Pres s ure BARnr. 1600 (mm) Type
strong, particularly hard-wearing inner lining 25,0 is anti-static. 31,4 Discharge is also 5 ensured by which the anti-static wire 32,0 38,4incorporated in5 the hose. For use in sandblasting and cleaning of metal, stone, 38,0 5 concrete, etc. 44,4 Installed using special 45,0 51,4 sand-blasting 5 connectors. 51,0 57,4 5 Please contact Codan for further information. 63,0 70,0 5
Wei ght (g/m)
Application: Sandblasting 15 Standard Length: 25040 metres 420
Product code
1005025000
-30°C 520 to 80°C 1005032000 15 Working Temperature: 300 Inside: NR 15 Colour: Black 380 610 1005038000 Polyester - Anti-static wire 15 Reinforcement: 440 700 1005045000 Outside: SBR 15 500 790 1005051000 Colour: Black 15 Standards: - 630 960 1005063000
76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de di127,0 a . (mm)
117,2 Outs i de di134,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.120 Bend Ra di us (mm) 1.250
1.730 Wei ght (g/m) 2.000
1005110000 Product
152,0 13,0 203,0 16,0
159,2 25,0 211,4 30,0
5 10 5 10
15 30 15 30
1.500 0 2.000 0
2.380 480 3.750 630
1005152000 1600013000 1005203000 1600016000
254,0 19,0
264,0 34,0
5 10
15 30
2.500 0
5.680 780
1005254000 1600019000
25,0
40,0
10
30
0
950
1600025000
32,0
48,0
10
30
0
1.330
1600032000
code 1005127000
38,0
56,0
10
30 0 conditions of an application 1.640will affect1600038000 of vulcanised Rubber Products). The individual the life time of each product.
42,0
60,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 30 0 1.790 1600042000 with incorrect media or use in environments outside the hose specification.
51,0
73,0
10
30
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
0
2.590
1600051000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1605 Material Handling Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
25,0 15 Codan 160531,4 - DIN 53516:5 70 +/-5mm3 32,0 38,4 5 Abrasion resistant softwall hose, used 38,0 44,4 5 for the delivery of sand or cast steel shot. It is 45,0 51,4an antistatic rubber 5 manufactured with compound. Also57,4 availible in other 5dimensions 51,0 and length upon request. Pls contact CODAN for 63,0 information. 70,0 5 further 76,0 82,4 5
15
Bend Ra di us (mm)
Wei ght (g/m)
Product code
250
420
1005025000
300
520
1005032000
POWERSTEERING
164
102,0
PVC
167
110,0
117,2
5
15 Type nr. 1605 380 610 Application: Sandblasting 15 Standard Length: 44040 metres 700 -40°C 790 to 70°C 15 Working Temperature: 500 Inside: SBR/NR 15 Colour: Black 630 960 Reinforcement: High Strength Cord 15 750 1.450 Outside: SBR/NR 15 Colour: Black 1.000 1.580 53516: 70 +/-5mm3 15 Standards: DIN 1.120 1.730
STEAM
179
127,0
134,2
5
15
1.250
2.000
1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de di254,0 a . (mm)
211,4 Outs i de di264,0 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
2.000 Bend Ra di us (mm) 2.500
3.750 Wei ght (g/m) 5.680
1005203000 Product
MATERIAL HANDLING 120 OIL
130
PETROL
148
WELDING & GAS INDEX
182
108,8
5
1005038000 1005045000 1005051000 1005063000 1005076000 1005102000 1005110000
code 1005254000
25,0
39,0
10
30
-
-
1605025000
32,0
48,0
10
30
-
-
1605032000
38,0
56,0
10
30 1605038000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
50,0
60,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse 1.600 such as excessive bending, crushing, stretching, use 30 230 1605050000 with incorrect media or use in environments outside the hose specification.
60,0
70,0
10
30
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
250
2.150
1605060000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
MATERIAL HANDLING HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1005Material Codan 1701 Handling Hose Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1701 - Black, flexible, wrapped pressure hose with Type nr. 1701 Ins i de Outs i de Worki ng Burs t Bend Ra di us Wei ght Product strong, particularly hard-wearing inner lining Application: Dry Cement di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR (mm) (g/m) code which is anti-static. Discharge is also ensured by Standard Length: 40 metres the anti-static wire -30°C 420 to 80°C 1005025000 25,0 31,4incorporated in5 the hose. For 15 Working Temperature: 250 various strongly abrasive materials, including Inside: NR 32,0 38,4 5 15 Colour: Black 300 520 1005032000 dry cement, granulates, etc. Installed using special sand-blasting Reinforcement: Polyester Anti-static wire 38,0 44,4 5 15 380 610 1005038000 connectors. Outside: EPDM/SBR 45,0 contact Codan 51,4 for further information. 5 15 Colour: Black 440 700 1005045000 Please 51,0 57,4 5 15 Standards: - 500 790 1005051000 63,0
70,0
5
15 15
630
960
1005063000
76,0
82,4
5
750
1.450
1005076000
102,0 Ins i de
108,8 Outs i de
5 ng Worki
15 t Burs
1.000 Bend Ra di us
1.580 Wei ght
1005102000 Product
di110,0 a . (mm)
di117,2 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 1.120
(g/m) 1.730
code 1005110000
127,0 51,0
134,2 64,0
5 8
15 24
1.250 0
2.000 1.470
1005127000 1701051000
152,0 63,0
159,2 79,0
5 8
15 24
1.500 0
2.380 2.660
1005152000 1701063000
203,0 76,0
211,4 94,8
5 8
15 24
2.000 0
3.750 3.240
1005203000 1701076000
254,0 80,0
264,0 99,0
5 8
15 24
2.500 0
5.680 3.430
1005254000 1701080000
90,0
110,0
8
24
0
4.050
1701090000
102,0
122,4
8
24
0
4.520
1701102000
127,0 147,4 8 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
24 0 5.520 1701127000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
152,0
174,0
8
complied with. Codan Rubber’s warranty 0 is void in the event of misuse 7.180 such as excessive bending, crushing, stretching, use 24 1701152000
203,0
230,0
8
24
with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
0
9.660
1701203000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
MATERIAL HANDLING HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1703 Material Handling Hose Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1703 - FDA
Black, flexible, wrapped pressure hose with light, Type nr. 1703 smooth, strong inner lining which, together with Application: PVC Granulate Insanti-static i de Outs i de Worki ng hose, BursStandard t Bend Ra40 di us Product the wires incorporated in the Length: metres Wei ght di a . (mm)reliable di atransport . (mm) s ure BAR Pres s ure BAR Temperature: (mm) code ensures of Pres the medium. Working -30°C (g/m) to 90°C Specially developed for PVC granulates, but the Inside: SBR/NR 25,0inner lining31,4 5 15 Colour: Bright 250 420 1005025000 light also makes it suitable for coarse Polyester with 2 Anti-static wires 32,0 foodstuffs. 38,4 5 15 Reinforcement: 300 520 1005032000 Please contact Codan for further information. Outside: SBR 38,0 44,4 5 15 380 610 1005038000 Colour: Black 45,0 51,4 5 15 Standards: FDA440 700 1005045000 51,0
57,4
5
15
500
790
1005051000
63,0
70,0
5
15
630
960
1005063000
76,0 Ins i de di102,0 a . (mm)
82,4i de Outs di108,8 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
750 Bend Ra di us (mm) 1.000
1.450 Wei ght (g/m) 1.580
1005076000 Product
110,0 51,0 127,0 63,0
117,2 67,4 134,2 81,0
5 8 5 8
15 24 15 24
1.120 0 1.250 0
1.730 1.940 2.000 2.440
1005110000 1703051000 1005127000 1703063000
152,0 76,0 203,0 80,0
159,2 95,2 211,4 100,4
5 8 5 8
15 24 15 24
1.500 0 2.000 0
2.380 2.980 3.750 3.630
1005152000 1703076000 1005203000 1703080000
254,0 90,0
264,0 109,2
5 8
15 24
2.500 0
5.680 4.040
1005254000 1703090000
102,0
123,6
8
24
0
5.000
1703102000
102,0
122,4
8
24
0
4.500
1703103000
110,0
130,0
8
24 0 conditions of an application 5.200will affect1703110000 of vulcanised Rubber Products). The individual the life time of each product.
127,0
149,0
8
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 24 0 6.240 1703127000 with incorrect media or use in environments outside the hose specification.
152,0
176,0
8
24
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
code 1005102000
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
0
7.470
1703152000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
MATERIAL HANDLING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1705 Material Handling Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
Codan 170557,4 - DIN 53516:5 70 +/-5mm3 51,0 15 63,0 70,0 5 Hardwall hose used for suction and delivery of 76,0 82,4 dry cement, sand, gravel, etc. Also 5availible in other lengths, dimensions etc. Pls contact CODAN 102,0 108,8 5 for further information. 110,0 117,2 5 127,0
134,2
5
152,0
159,2
5
203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
114,0
138,0
10
440
700
1005045000
500
790
1005051000
15
630 960 1005063000 Type nr. 1705 15 Application: Dry 750 1.450 1005076000 Cement Standard Length: 15 metres 15 1.000 1.580 1005102000 Working Temperature: -30°C to 70°C 15 Inside: SBR/NR1.120 1.730 1005110000 Colour: Black 15 1.250 2.000 1005127000 Reinforcement: High Strength Synthetic Cord. 15 Steel Helix wire 1.500 2.380 and antistatic copper 1005152000 wire Outside: EPDM 15 2.000 3.750 1005203000 Colour: Black 15 Standards: DIN 2.500 5.680 1005254000 53516: 70 +/-5mm3
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Burs t Bend Ra di us Wei ght Product Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use Pres scomplied ure BAR (mm) (g/m) code with incorrect media or use in environments outside the hose specification.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Please contact Codan Rubber for individual product manufacturing tolerances.
30
0
6.340
1705114000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
MATERIAL HANDLING HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Codan 2700 Material Handling Hose Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further2700 information. Codan --
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards: Black, wrapped suction/pressure hose with Type nr. 2700 strong, smooth, hard-wearing inner lining which Application: Abrasive materials - suction is anti-static. Discharge is also ensured by the Standard Length: 40 metres anti-static wire incorporated in the hose. Working Temperature: -30°C to 70°C For sand, and other NR Bend Ra di us Insvacuuming i de Outs i dedry cementWorki ng BursInside: t Wei ght Product strongly Colour: di a . (mm)abrasive di a . materials. (mm) Pres s ure BAR Pres s ure BAR Black (mm) (g/m) code Please contact Codan for further information. Reinforcement: Polyester with steel helix and 25,0 31,4 5 15 anti-static wire. 250 420 1005025000 Outside: SBR 32,0 38,4 5 15 300 520 1005032000 Colour: Black 38,0 44,4 5 15 Standards: - 380 610 1005038000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
45,0
51,4
5
15
440
700
1005045000
WELDING & GAS
182
51,0
57,4
5
15
500
790
1005051000 1005063000 Product
INDEX
63,0 Ins i de di76,0 a . (mm)
70,0i de Outs di82,4 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
630 Bend Ra di us (mm) 750
960ght Wei (g/m) 1.450
code 1005076000
102,0 51,0 110,0 63,5
108,8 65,0 117,2 78,0
5 5 5 5
15 15 15 15
1.000 310 1.120 380
1.580 2.100 1.730 310
1005102000 2700051000 1005110000 2700063000
127,0 76,0 152,0 80,0
134,2 91,0 159,2 98,0
5 5 5 5
15 15 15 15
1.250 460 1.500 500
2.000 3.900 2.380 4.030
1005127000 2700076000 1005152000 2700080000
203,0 90,0 254,0 102,0
211,4 106,0 264,0 118,0
5 5 5 5
15 15 15 15
2.000 550 2.500 610
3.750 4.500 5.680 5.100
1005203000 2700090000 1005254000 2700102000
110,0
130,0
5
15
690
6.360
2700110000
127,0
143,0
5
15
760
7.500
2700127000
188,0 4with all the information you need. This hose152,0 specification sheet has been prepared with great care in order to provide you
12 910 of vulcanised Rubber Products). The individual conditions of an11.100 application will affect2700152000 the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
203,0
220,0
3
254,0
279,0
3
9
1.250
15.100
2700203000
9
1.800
18.270
2700254000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015 This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
MATERIAL HANDLING HOSES Codan 2703 Material Handling Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
FOOD
87
Codan 2703 - FDA
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1005 Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Black, flexible, wrapped pressure hose with light, Type nr. 2703 smooth, strong inner lining which, together with Application: PVC Granulates - Suction the anti-static wires and double steel helix Standard Length: 40 metres Ins i de de ng BursWorking t Bend Ra di us -30°CWei ght Product incorporated inOuts thei hose, ensureWorki reliable Temperature: to 90°C di a . (mm) of the di amedium. . (mm) Specially Pres s ure BAR BAR NR (mm) (g/m) code transport developed forPres s ure Inside: suction/transport of PVC granulates, but the light Colour: Bright 25,0lining also31,4 15 Reinforcement: 250 1005025000 inner makes it suitable5for abrasive Polyester w/ 420 double steel helix foodstuffs. wire. 32,0 38,4 5 15 and anti-static300 520 1005032000 Please contact Codan for further information. Outside: SBR 38,0 44,4 5 15 380 610 1005038000 Colour: Black 45,0 51,4 5 15 Standards: FDA440 700 1005045000 51,0
57,4
5
15 15
500
790
1005051000
63,0
70,0
5
630
960
1005063000
76,0 Ins i de
82,4i de Outs
5 ng Worki
15 t Burs
750 Bend Ra di us
1.450 Wei ght
1005076000 Product
di102,0 a . (mm)
di108,8 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 1.000
(g/m) 1.580
code 1005102000
110,0 51,0 127,0 63,0
117,2 67,4 134,2 79,0
5 8 5 8
15 24 15 24
1.120 310 1.250 380
1.730 2.400 2.000 3.050
1005110000 2703051000 1005127000 2703063000
152,0 76,0 203,0 80,0
159,2 94,0 211,4 102,8
5 8 5 8
15 24 15 24
1.500 460 2.000 530
2.380 3.790 3.750 5.070
1005152000 2703076000 1005203000 2703080000
254,0 90,0
264,0 112,8
5 8
15 24
2.500 570
5.680 5.610
1005254000 2703090000
102,0
124,8
8
24
650
6.500
2703102000
110,0
133,0
8
24
720
6.800
2703110000
127,0
152,0
8
24 850 9.420will affect2703127000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
152,0
176,0
8
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 24 1.050 11.980 2703152000 with incorrect media or use in environments outside the hose specification.
203,0
232,0
8
24
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
1.320
18.200
2703203000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
MATERIAL HANDLING HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2710 Material Handling Hose Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2710 - -
An easy and flexible suction hose with high Type nr. 2710 wearability. Black and corrugated surface. Application: Abrasive materials - suction Ins i de Outs i de Worki ng Burs t Bend Ra di us Wei ght Product 90% Vacuum. Standard Length: - metres di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR (mm) (g/m) code Lengths: up to 4" - 40 m; 127 and 152 mm – 25 m; Working Temperature: -40°C to 80°C 203 mm – 20 m. Inside: Natural Rubber 25,0 31,4 5 15 250 420 1005025000 Colour: Brown 32,0 38,4 5 15 Reinforcement: 300 520yarns1005032000 Synthetic Textile and steel 38,0 44,4 5 15 spiral 380 610 1005038000 Outside: NR/SBR 45,0 51,4 5 15 Colour: Black 440 700 1005045000 Standards: 51,0 57,4 5 15 500 790 1005051000 63,0
70,0
5
15
630
960
1005063000
76,0
82,4
5
15
750
1.450
1005076000
102,0 Ins i de di110,0 a . (mm)
108,8 Outs i de di117,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.000 Bend Ra di us (mm) 1.120
1.580 Wei ght (g/m) 1.730
1005102000 Product
127,0 40,0
134,2 51,0
5 0
15 0
1.250 0
2.000 830
1005127000 2710040000
152,0 50,0
159,2 61,0
5 0
15 0
1.500 0
2.380 1.150
1005152000 2710050000
203,0 63,0
211,4 76,0
5 0
15 0
2.000 0
3.750 1.430
1005203000 2710063000
254,0 76,0
264,0 89,0
5 0
15 0
2.500 0
5.680 1.740
1005254000 2710076000
code 1005110000
90,0
104,0
0
0
0
2.450
2710090000
102,0
116,0
0
0
0
2.950
2710102000
127,0
144,0
0
0
0
3.600
2710127000
152,0
169,0
0
0
370
4.400
2710152000
203,0
220,0
0
0
610
8.230
2710203000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
OIL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
1900
3010
1902
3011
1915
3012
1918
3020
2006
3217
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
2106
2206
2901
INDEX
2915
3002
3006
3009
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
OIL HOSES Codan 1900 Oil Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
FOOD
87
Codan 1900 - -
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1005 Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Black, wrapped pressure hose with integrated Type nr. 1900 anti-static wire and excellent low-temperature Application: Petrol Tanker Hose tolerance. Hard-wearing, weather-resistant outer Standard Length: 40 metres layer of rubber.Outs Inner is resistant to BursWorking Temperature: to 70°C Ins i de i derubber layer Worki ng t Bend Ra di us -35°CWei ght Product max. 50% aromatics. Inside: di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR NBR (mm) (g/m) code For use as pressure oil hose and tanker hose in Colour: Black 25,0 31,4 5 15 Reinforcement: 250 420 1005025000 industrial applications. Polyester Installed using DIN clamps or hose clamps Outside: CR 32,0 38,4 5 15 300 520 1005032000 tightened with Allen key. Colour: Black 38,0 44,4 5 15 380 610 1005038000 Please contact Codan for further information. Standards: 45,0
51,4
5
15
440
700
1005045000
51,0
57,4
5
15
500
790
1005051000
63,0
70,0
5
15
630
960
1005063000
Ins i de di76,0 a . (mm)
Outs i de di82,4 a . (mm)
Worki ng Pres s 5 ure BAR
Burs t Pres s15 ure BAR
Bend Ra di us (mm) 750
Wei ght (g/m) 1.450
code 1005076000
102,0 32,0 110,0 38,0
108,8 43,0 117,2 50,8
5 10 5 10
15 30 15 30
1.000 200 1.120 230
1.580 1.020 1.730 1.170
1005102000 1900032000 1005110000 1900038000
127,0 42,0 152,0 45,0
134,2 56,0 159,2 59,0
5 10 5 10
15 30 15 30
1.250 245 1.500 285
2.000 1.430 2.380 1.500
1005127000 1900042000 1005152000 1900045000
203,0 51,0 254,0 63,0
211,4 65,0 264,0 77,4
5 10 5 10
15 30 15 30
2.000 315 2.500 425
3.750 1.670 5.680 2.040
1005203000 1900051000 1005254000 1900063000
76,0
91,6
10
30
530
2.700
1900076000
90,0
105,6
10
30
625
3.120
1900090000
102,0
118,0
10
30 700 3.530will affect1900102000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
152,0
173,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 30 1.200 6.000 1900152000 with incorrect media or use in environments outside the hose specification.
203,0
227,0
10
30
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Product
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
1.600
8.600
1900203000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
OIL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Codan 1902 Oil Hose Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan 1902 -
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
OIL
130
PETROL
148
25,0
31,4
5
POWERSTEERING
164
32,0
38,4
5
PVC
167
38,0
44,4
5
STEAM
179
WELDING & GAS INDEX
182
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Type nr. 1902 Application: New Type No.: 1900 Standard Length: - metres Temperature: -°Cght BursWorking t Bend Ra di us -°C toWei Inside: Pres s ure BAR (mm) (g/m) Colour: 15 Reinforcement: 250 420 Outside: 15 Colour: 300 520 15 Standards: 380 610
Product code
1005025000 1005032000 1005038000
45,0
51,4
5
15
440
700
1005045000
51,0
57,4
5
15
500
790
1005051000 1005063000 Product
63,0 Ins i de di76,0 a . (mm)
70,0i de Outs di82,4 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
630 Bend Ra di us (mm) 750
960ght Wei (g/m) 1.450
code 1005076000
102,0 32,0
108,8 48,8
5 10
15 30
1.000 200
1.580 1.020
1005102000 1902032000
110,0 38,0
117,2 50,8
5 10
15 30
1.120 230
1.730 1.170
1005110000 1902038000
127,0 42,0
134,2 56,0
5 10
15 30
1.250 245
2.000 1.430
1005127000 1902042000
152,0 45,0
159,2 59,0
5 10
15 30
1.500 285
2.380 1.500
1005152000 1902045000
203,0 51,0
211,4 65,0
5 10
15 30
2.000 315
3.750 1.670
1005203000 1902051000
254,0 63,0
264,0 77,4
5 10
15 30
2.500 425
5.680 2.040
1005254000 1902063000
76,0
91,6
10
30
530
2.700
1902076000
90,0
105,6
10
30
625
3.120
1902090000
102,0
118,0
10
30 700 3.530 1902102000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
152,0
173,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse 6.000 such as excessive bending, crushing, stretching, use 30 1.200 1902152000 with incorrect media or use in environments outside the hose specification.
203,0
227,0
10
30
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
1.600
8.600
1902203000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
OIL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Codan 1915 Oil Hose Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1915 - -
Black, wrapped pressure hose with integrated Type nr. 1915 anti-static wire. Hard-wearing, weather-resistant Application: Oil/Petrol Ins i de Outs i deInner rubber Worki ng is BursStandard t Bend Ra40 di us Product outer layer of rubber. layer Length: metres Wei ght di a . (mm) to max. di a .50% (mm) Pres s ure BAR Pres s ure BAR Temperature: (mm) code resistant aromatics. Working -30°C (g/m) to 100°C For use as pressure oil hose and tanker hose in Inside: NBR 25,0 31,4 5 15 Colour: Black 250 420 1005025000 industrial applications. Installed using DIN clamps or heavy-duty hose Reinforcement: Polyester 32,0 38,4 5 15 300 520 1005032000 clamps tightened with Allen key. Outside: CR 38,0 44,4 5 15 380 610 1005038000 Please contact Codan for further information. Colour: Black 45,0 51,4 5 15 Standards: - 440 700 1005045000 51,0
57,4
5
15
500
790
1005051000
63,0
70,0
5
15
630
960
1005063000
76,0 Ins i de di102,0 a . (mm)
82,4i de Outs di108,8 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
750 Bend Ra di us (mm) 1.000
1.450 Wei ght (g/m) 1.580
1005076000 Product
110,0 32,0
117,2 45,2
5 15
15 48
1.120 200
1.730 1.030
1005110000 1915032000
127,0 38,0
134,2 50,0
5 15
15 48
1.250 220
2.000 1.190
1005127000 1915038000
152,0 40,0
159,2 53,2
5 15
15 48
1.500 275
2.380 1.240
1005152000 1915040000
203,0 45,0
211,4 59,4
5 15
15 48
2.000 290
3.750 1.520
1005203000 1915045000
254,0 51,0
264,0 65,4
5 15
15 48
2.500 320
5.680 1.690
1005254000 1915051000
code 1005102000
63,0
77,8
15
48
425
2.100
1915063000
76,0
92,0
15
48
530
2.740
1915076000
80,0
96,0
15
48 565 2.880 1915080000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
90,0
106,8
15
complied with. Codan Rubber’s warranty is void in the event of misuse 3.200 such as excessive bending, crushing, stretching, use 48 640 1915090000 with incorrect media or use in environments outside the hose specification.
102,0
120,0
15
48
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
720
3.900
1915102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
OIL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Codan 1005Oil - Hose Codan 1918 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1918 - Black, wrapped delivery hose with integrated Type nr. 1918 Ins i de Outs i de Worki ng Burs t Bend Ra di us Wei ght Product anti-static wire and excellent low-temperature Application: Oil/Petrol di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR (mm) (g/m) code tolerance. Hard-wearing, weather-resistant outer Standard Length: - metres layer Inner rubber layer 5is resistant to 15 Working Temperature: -35°C 420 to 70°C 1005025000 25,0of rubber. 31,4 250 max. 40% aromatics. For use as pressure oil Inside: NBR 32,0and tanker38,4 15 Colour: Black 300 520 1005032000 hose hose in industrial5applications. Please contact Codan for further information. Reinforcement: Polyester, Antistatic copper wire 38,0 44,4 5 15 380 610 1005038000 Outside: CR 45,0 51,4 5 15 Colour: Black 440 700 1005045000 51,0 57,4 5 15 Standards: - 500 790 1005051000 63,0
70,0
5
15
630
960
1005063000
76,0
82,4
5
15
750
1.450
1005076000
102,0 Ins i de di110,0 a . (mm)
108,8 Outs i de di117,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.000 Bend Ra di us (mm) 1.120
1.580 Wei ght (g/m) 1.730
1005102000 Product
127,0 19,0
134,2 31,0
5 18
15 54
1.250 0
2.000 630
1005127000 1918019000
152,0 25,0
159,2 32,0
5 18
15 54
1.500 0
2.380 750
1005152000 1918025000
203,0 32,0
211,4 44,0
5 18
15 54
2.000 0
3.750 950
1005203000 1918032000
254,0 38,0
264,0 51,0
5 18
15 54
2.500 0
5.680 1.200
1005254000 1918038000
45,0
59,0
18
54
0
1.550
1918045000
51,0
65,0
18
54
0
1.700
1918051000
code 1005110000
63,5 79,0 18 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
54 0 2.400 1918063000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
76,0
91,0
18
complied with. Codan Rubber’s warranty0 is void in the event of misuse 2.650 such as excessive bending, crushing, stretching, use 54 1918076000 with incorrect media or use in environments outside the hose specification.
102,0
118,0
18
54
Please contact Codan Rubber for individual product manufacturing tolerances.
0
3.700
1918102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
OIL HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2006 Oil Hose Codan 2006 Oil Hose Codan 1005 / Water Hose 2006 Air Oil Hose
Codan 2006 - DNV/LLOYDS Codan 2006high-quality - DNV/LLOYDS Black, wrapped, hose approved for use as wet diesel exhaust pipe and fuel pipe on Codan 1005 Codan 2006 - mDNV/LLOYDS boats than 15 in length. Max. 55% Black, less wrapped, high-quality hose approved for aromatics. Approved by Lloyds and Det Norske use as wet diesel exhaust pipe and fuel pipe Black, wrapped, reinforced,high-quality layflat water hose. Easy to on Black, hose approved for Veritas. Incorporated double steel helix allows boats than 15exhaust m in length. Max. 55% handle and extremely space-saving. Flexible, use asless wet diesel pipe and fuel pipe on the hose toused be bent without kinking inOften small aromatics. Approved Lloyds and Norske even at low used boatswhen less than 15 m by intemperatures. length. Max.Det 55% engine compartments with limited access. FireVeritas. Incorporated double steel helix allows on building sites for immersion pumps, etc. or aromatics. Approved by Lloyds and Det Norske retardant rubber coating. Normally the hose toouter be are bent without kinking in small where liquids carried under pressure. Veritas. Incorporated double steel helix allows installed using heavy-duty hose clamps engine compartments withhose limited access. FireNormally clamps, Bauer or the hose toinstalled be bent using without kinking in small tightened with Allen key. retardant outer rubber coating. Normally Stortz or similar. contact Codan enginefittings, compartments withPlease limited access. FirePlease contact Codan for further information. installed using heavy-duty hoseNormally clamps for further information. retardant outer rubber coating. tightened with Allen key. installed using heavy-duty hose clamps Please contact Codankey. for further information. tightened with Allen Please contact Codan for further information. Ins i de di a . (mm) Ins i de di25,0 a . (mm) Ins i de di32,0 a . (mm) 25,0
Outs i de di a . (mm) Outs i de di35,0 a . (mm) Outs i de
Worki ng Pres s ure BAR Worki ng Pres s10 ure BAR Worki ng
Type nr. 2006 Application: Marine Exhaust Standard Length: 40 metres Type nr. 2006 Working Temperature: -30°C to 100°C Application: Marine Exhaust Type nr. nr. 2006 1005 Type Inside: NBR Standard Length: 40 metres Application: Air / Water Hose Application: Marine Exhaust Colour: Black Working -30°C to 100°C Standard Length: StandardTemperature: Length: 40 40 metres metres Reinforcement: Polyester w/ double steel helix Inside: NBR Working Temperature: -30°C to Working Temperature: -30°C to 90°C 100°C Outside: CR Colour: Black Inside: Inside: NR/SBR NBR Colour: Black Polyester w/ double steel helix Reinforcement: Colour: Colour: Black Black Standards: Outside: CRDNV/LLOYDS Reinforcement: Polyester Reinforcement: Polyester w/ double steel helix Colour: Black Outside: NR/SBR Outside: CR Standards: DNV/LLOYDS Colour: Colour: Black Black Standards: Standards: DNV/LLOYDS
Burs t Pres s ure BAR Burs t Pres s30 ure BAR Burs t
Bend Ra di us (mm) Bend Ra di us 110 (mm) Bend Ra di us
Wei ght (g/m) Wei ght 750 (g/m) Wei ght
Product code Product 2006025000 code Product
160 920 2006032000 di42,0 a . (mm) Pres s10 ure BAR Pres s30 ure BAR (mm) (g/m) code 35,0 10 30 110 750 2006025000 25,0 31,4 5 15 250 420 1005025000 38,0 48,0 10 30 200 1.060 2006038000 25,0 35,0 110 750 2006025000 32,0 42,0 10 30 160 920 2006032000 38,4 5 15 300 520 1005032000 40,0 50,4 10 30 220 1.094 2006040000 32,0 42,0 160 920 2006032000 38,0 48,0 10 30 200 1.060 2006038000 44,4 5 15 380 610 1005038000 42,0 52,4 10 30 215 1.147 2006042000 38,0 48,0 200 1.060 2006038000 40,0 50,4 10 30 220 1.094 2006040000 45,0 51,4 5 15 440 700 1005045000 45,0 55,0 10 30 240 1.230 2006045000 40,0 50,4 220 1.094 2006040000 42,0 52,4 10 30 215 1.147 2006042000 51,0 57,4 5 15 500 790 1005051000 48,0 58,4 10 30 235 1.440 2006048000 42,0 52,4 215 1.147 2006042000 45,0 55,0 10 30 240 1.230 2006045000 63,0 70,0 5 15 630 960 1005063000 51,0 64,0 10 30 280 1.660 2006051000 45,0 55,0 240 1.230 2006045000 48,0 58,4 10 30 235 1.440 2006048000 76,0 82,4 5 15 750 1.450 1005076000 55,0 67,8 8 24 285 1.790 2006055000 48,0 58,4 235 1.440 2006048000 51,0 64,0 10 30 280 1.660 2006051000 102,0 108,8 5 15 1.000 1.580 1005102000 57,0 70,0 8 24 300 1.840 2006057000 51,0 64,0 10 30 280 1.660 2006051000 55,0 67,8 8 24 285 1.790 2006055000 110,0 117,2 5 15 1.120 1.730 1005110000 60,0 72,8 8 24 310 1.950 2006060000 55,0 67,8 285 1.790 2006055000 57,0 70,0 8 24 300 1.840 2006057000 127,0 134,2 5 15 1.250 2.000 1005127000 63,0 76,0 8 24 330 2.400 2006063000 57,0 70,0 300 1.840 2006057000 60,0 72,8 8 24 310 1.950 2006060000 152,0 159,2 5 15 1.500 2.380 1005152000 70,0 82,8 8 24 340 2.620 2006070000 60,0 72,8 310 1.950 2006060000 63,0 76,0 8 24 330 2.400 2006063000 203,0 211,4 5 15 2.000 3.750 1005203000 76,0 89,0 7 21 430 2.840 2006076000 63,0 76,0 330 2.400 2006063000 70,0 82,8 8 24 340 2.620 2006070000 254,0 264,0 5 15 2.500 5.680 1005254000 80,0 90,0 7 21 440 2.990 2006080000 70,0 82,8 8 24 340 2.620 2006070000 76,0 89,0 7 21 430 2.840 2006076000 90,0 104,0 7 21 475 3.300 2006090000 76,0 89,0 430 2.840 2006076000 80,0 90,0 7 21 440 2.990 2006080000 102,0 116,0 7 21 600 4.680 2006102000 80,0 90,0 440 2.990 2006080000 90,0 104,0 7 21 475 3.300 2006090000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. This hose specification sheet has been prepared with great care in order to provide you with all the information you need. 152,0 172,0 6 18 1.060 9.400 2006152000 Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in 90,0 104,0 475 3.300 2006090000 102,0 116,0 7maintenance, care and inspection 21 600 2006102000 complied with. Codan Rubber’s warranty is void in the event of misuse 4.680 such as excessive bending, crushing, stretching, use applications not covered in the product data sheet. Codan Rubber recommends regular with incorrect media or use in environments outside the hose specification. of hoses203,0 before use. Hoses should be replaced if any physical damage is seen, especially 223,0 5 to the cover of the hose or in the 15 1.200 12.450 2006203000 Please contact Codan Rubber for individual product manufacturing tolerances. area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage 102,0 116,0 7 21 600 4.680 2006102000 152,0 172,0 6 18 1.060 9.400 2006152000 254,0 276,0 5 15 1.500 17.360 2006254000 152,0 172,0 6 18 1.060 9.400 2006152000 203,0 223,0 5 15 1.200 12.450 2006203000 305,0 329,0 5 A/S Valdemarshaab 15 1,DK-4600 Køge,2.000 20.480 2006305000 Denmark Coda n Rubber Da nma rk 203,0 223,0 1.200 12.450 2006254000 2006203000 254,0 276,0 5 15 1.500 17.360 254,0 305,0 305,0
Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com
276,0 329,0
5
15
1.500 2.000
17.360 20.480
2006254000 2006305000
329,0
5
15
2.000
20.480
2006305000 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
OIL HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2106 Oil Hose Codan 2106 Oil Hose Codan 1005 / Water Hose 2106 Air Oil Hose
Codan 2106 - DNV/LLOYDS Codan 2106 -lightweight, DNV/LLOYDS Black, corrugated, high-quality hose approved for use as wet diesel exhaust pipe and Codan 1005 Codan 2106 - DNV/LLOYDS fuel pipe on boats less than 15 high-quality m in length. Max. Black, corrugated, lightweight, hose 55% aromatics. Approved by Lloyds Det approved for use as wet diesel exhaust pipe and Black, corrugated, reinforced, layflat water high-quality hose.and Easy tohose Black, lightweight, Norske Veritas. Incorporated double steel helix fuel pipe on boats less than 15 m in length. Max. handle and extremely space-saving. Flexible, approved for use as wet diesel exhaust pipe and allows the hose to be without kinking 55% aromatics. Approved by Lloyds Detin even when at less lowbent temperatures. Often used fuel pipe onused boats than 15 m in and length. Max. small engine compartments with limited access. Norske Veritas. Incorporated double steel helix on building sites for immersion pumps, etc. or 55% aromatics. Approved by Lloyds and Det Fire retardant outer coating. Normally allows the hose tocarried berubber bentunder without kinking in where are pressure. Norskeliquids Veritas. Incorporated double steel helix installed using heavy-duty hose clamps small compartments with limited access. Normally using clamps, Bauer allowsengine theinstalled hose to be benthose without kinking in or tightened with Allen key. Fire retardant outer rubber coating. Normally Stortz fittings,compartments or similar. Please Codan small engine withcontact limited access. Please contact Codan for furtherclamps information. installed using heavy-duty for information. Firefurther retardant outer rubber hose coating. Normally tightened with Allen key. installed using heavy-duty hose clamps Please contact Codankey. for further information. tightened with Allen Please contact Codan for further information. Ins i de di a . (mm) Ins i de 25,0 diIns a . (mm) i de 32,0 di25,0 a . (mm)
Outs i de di a . (mm) Outs i de 34,0 diOuts a . (mm) i de 41,0 di34,0 a . (mm)
Worki ng Pres s ure BAR Worki ng 10 Pres s ureng BAR Worki 10 Pres s10 ure BAR
Type nr. 2106 Application: Marine Exhaust Standard Length: 40 metres Type nr. 2106 Working Temperature: -30°C to 100°C Application: Marine Exhaust Type nr. nr. 2106 1005 Type Inside: NBR Standard Length: 40 metres Application: Air / Water Hose Application: Marine Exhaust Colour: Black Working -30°C to 100°C Standard Length: StandardTemperature: Length: 40 40 metres metres Reinforcement: Polyester w/ double steel helix Inside: NBR Working Temperature: -30°C to Working Temperature: -30°C to 90°C 100°C Outside: CR Colour: Black Inside: Inside: NR/SBR NBR Colour: Black Polyester w/ double steel helix Reinforcement: Colour: Colour: Black Black Standards: Outside: CRDNV/LLOYDS Reinforcement: Polyester Reinforcement: Polyester w/ double steel helix Colour: Black Outside: NR/SBR Outside: CR Standards: DNV/LLOYDS Colour: Colour: Black Black Standards: Standards: DNV/LLOYDS
Burs t Pres s ure BAR Burs t 30 PresBurs s uretBAR Pres s30 ure BAR 30
Bend Ra di us (mm) Bend Ra di us 100 (mm) Bend Ra di us 130 (mm) 100
Wei ght (g/m) Wei ght 670 (g/m) Wei ght 810 (g/m) 670
Product code Product 2106025000 code Product 2106032000 code 2106025000
25,0 31,4 5 15 250 420 1005025000 38,0 47,0 10 30 150 940 2106038000 25,0 34,0 100 670 2106025000 41,0 10 30 130 810 2106032000 32,0 38,4 5 15 300 520 1005032000 40,0 49,0 10 30 165 990 2106040000 32,0 41,0 130 810 2106032000 47,0 10 30 150 940 2106038000 38,0 44,4 5 15 380 610 1005038000 42,0 51,0 10 30 170 1.040 2106042000 38,0 47,0 150 940 2106038000 40,0 49,0 10 30 165 990 2106040000 45,0 51,4 5 15 440 700 1005045000 45,0 54,0 10 30 180 1.110 2106045000 40,0 49,0 165 990 2106040000 42,0 51,0 10 30 170 1.040 2106042000 51,0 57,4 5 15 500 790 1005051000 48,0 57,0 10 30 190 1.411 2106048000 42,0 51,0 170 1.040 2106042000 45,0 54,0 10 30 180 1.110 2106045000 63,0 70,0 5 15 630 960 1005063000 51,0 60,0 10 30 200 1.500 2106051000 45,0 54,0 180 1.110 2106045000 48,0 57,0 10 30 190 1.411 2106048000 76,0 82,4 5 15 750 1.450 1005076000 55,0 65,0 8 24 220 1.765 2106055000 48,0 57,0 190 1.411 2106048000 51,0 60,0 10 30 200 1.500 2106051000 102,0 108,8 5 15 1.000 1.580 1005102000 57,0 67,0 8 24 230 1.830 2106057000 51,0 60,0 10 30 200 1.500 2106051000 55,0 65,0 8 24 220 1.765 2106055000 110,0 117,2 5 15 1.120 1.730 1005110000 60,0 70,0 8 24 240 1.923 2106060000 55,0 65,0 220 1.765 2106055000 57,0 67,0 8 24 230 1.830 2106057000 127,0 134,2 5 15 1.250 2.000 1005127000 63,0 73,0 8 24 250 2.020 2106063000 57,0 67,0 230 1.830 2106057000 60,0 70,0 8 24 240 1.923 2106060000 152,0 159,2 5 15 1.500 2.380 1005152000 70,0 80,0 7 21 280 2.201 2106070000 60,0 70,0 240 1.923 2106060000 63,0 73,0 8 24 250 2.020 2106063000 203,0 211,4 5 15 2.000 3.750 1005203000 76,0 86,0 7 21 300 2.390 2106076000 63,0 73,0 8 24 250 2.020 2106063000 70,0 80,0 7 21 280 2.201 2106070000 254,0 264,0 5 15 2.500 5.680 1005254000 80,0 90,0 7 21 320 2.515 2106080000 70,0 80,0 280 2.201 2106070000 76,0 86,0 7 21 300 2.390 2106076000 90,0 100,4 7 21 360 2.830 2106090000 76,0 86,0 300 2.390 2106076000 80,0 90,0 7 21 320 2.515 2106080000 102,0 113,0 7 21 450 3.320 2106102000 80,0 90,0 320 2.515 2106080000 90,0 100,4 7 21 360 2.830 2106090000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. This hose specification sheet has been prepared with great care in order to provide you with all the information you need. 152,0 164,0 6 18 700 6.980 2106152000 Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in 90,0 100,4 360 2.830 2106090000 102,0 113,0 7maintenance, care and inspection 21 450 2106102000 complied with. Codan Rubber’s warranty is void in the event of misuse 3.320 such as excessive bending, crushing, stretching, use applications not covered in the product data sheet. Codan Rubber recommends regular with incorrect media or use in environments of hoses203,0 before use. Hoses should be replaced if any physical damage is seen, especially 217,0 5 to the cover of the hose or in the 15 950outside the hose specification. 9.710 2106203000 Please contact Codan Rubber for individual product manufacturing tolerances. area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage 102,0 113,0 7 21 450 3.320 2106102000 152,0 164,0 6 18 700 6.980 2106152000 254,0 270,0 5 15 1.250 13.777 2106254000 152,0 164,0 6 18 700 6.980 2106152000 203,0 217,0 5 15 950 9.710 2106203000 305,0 322,0 5 A/S Valdemarshaab 15 1,DK-4600 Køge,1.500 15.410 2106305000 Denmark Coda n Rubber Da nma rk 203,0 217,0 950 9.710 2106203000 254,0 270,0 5 15 1.250 13.777 2106254000 254,0 305,0 305,0
Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com
270,0 322,0
5
15
1.250 1.500
13.777 15.410
2106254000 2106305000
322,0
5
15
1.500
15.410
2106305000 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 2206 Oil OIL Hose HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2206 Oil Hose Codan Codan 2206 1005 Oil Air Hose / Water Hose
Codan 2206 - LLOYDS Black, wrapped, Codan 2206high-quality - LLOYDShose approved for use as wet diesel exhaust pipe on boats less than 15 m in length. Approved by Lloyds. 2 steel wire Black, wrapped, high-quality hose approved for Codan 2206 -- LLOYDS helices and 2 nylon plies up to diam 102mm Codan use as wet1005 diesel exhaust pipe on boats less than included, for larger sizes 2 rayon plies and 2 15 m inwrapped, length. Approved by Lloyds. 2 steel wire Black, hose to approved for steel wire heliceshigh-quality allows the hose bent Black, reinforced, layflat water hose.be Easy to helices and 2 nylon plies up to diam 102mm use as wet dieselinexhaust pipe on boats less than without kinking small engine compartments handle and space-saving. Flexible, included, forextremely larger sizes 2 rayon plies andwire 2 15 mlimited in length. Approved by Lloyds. 2 steel with access. Fire-retardant outer rubber even when used atallows low temperatures. Often used steel wire helices the hose to be bent helices and 2 nyloninstalled plies upusing to diam 102mm coating. Normally heavy-duty on building sitesinfor immersion pumps, etc. or without kinking small engine compartments included, for tightened larger sizes 2 rayon plies and 2 hose clamps with Allenpressure. key. where liquidsaccess. are carried under with Fire-retardant rubber steel limited wire helices allows the hoseinformation. toouter be bent Please contact Codan for further Normally installedinstalled using hose clamps, Bauer or coating. Normally using heavy-duty without kinking in small engine compartments Stortz fittings,tightened or similar. Please Codan hose clamps with Allencontact key. with limited access. Fire-retardant outer rubber for further information. Please contact Codan for further information. coating. Normally installed using heavy-duty hose clamps tightened with Allen key. Ins i decontactOuts i defor furtherWorki ng Please Codan information.
Type nr. 2206 Application: Marine Exhaust Standard Length: - metres Type nr. 2206 Working Temperature: -40°C to 100°C Application: Marine Exhaust Inside: NR/SBR Standard Length: - metres Type nr.Black 2206 Colour: Type nr. 1005 Working Temperature: -40°C to 100°C Application: Marine Exhaust Reinforcement: nylon plies w/2 steel wire Application: Air /2Water Hose Inside: NR/SBR Standard Length: metres helices Standard Length: 40 metres Colour: WorkingBlack Temperature: -40°C to 100°C Outside: NR/SBR Working Temperature: 90°C Reinforcement: 2 nylon-30°C plies to w/2 steel wire Inside: Colour:NR/SBR Black Inside: NR/SBR helices Colour: Black Standards: LLOYDS Colour: Black Outside: NR/SBR2 nylon plies w/2 steel wire Reinforcement: Reinforcement: Polyester Colour: helices Black Outside: NR/SBR Standards: LLOYDS Outside: NR/SBR Colour: Black Colour: Black BursStandards: t Bend Ra di us Wei ght Product Standards: LLOYDS
di a . (mm)
di a . (mm)
Pres s ure BAR
Pres s ure BAR
(mm)
(g/m)
Ins i de 19,0 di a . (mm) 22,0 Ins i de Ins i de 19,0 di25,0 a . (mm) di a . (mm)
Outs 27,0i de di a . (mm) 30,0i de Outs Outs i de 27,0 di33,0 a . (mm) di a . (mm)
Worki 0 ng Pres s ure BAR 0 ng Worki Worki ng 0 Pres s 0 ure BAR Pres s ure BAR
Burs 10 t Pres s ure BAR 10 t Burs Burs t 10 Pres s10 ure BAR Pres s ure BAR
Bend82 Ra di us (mm) Bend95 Ra di us Bend Ra di us 82 (mm) 110 (mm)
Wei 490ght (g/m) 560ght Wei Wei ght 490 (g/m) 620 (g/m)
code
Product 2206019000 code
2206022000 Product Product 2206019000 code 2206025000 code
22,0 30,0 0 10 95 560 2206022000 25,0 31,4 5 15 250 420 1005025000 28,0 36,0 0 10 125 680 2206028000 19,0 27,0 0 10 82 490 2206019000 25,0 33,0 0 10 110 620 2206025000 38,4 5 15 300 520 1005032000 32,0 40,0 0 10 140 760 2206032000 22,0 30,0 0 10 95 560 2206022000 28,0 36,0 0 10 125 680 2206028000 44,4 5 15 380 610 1005038000 38,0 47,0 0 10 170 1.040 2206038000 25,0 33,0 0 10 110 620 2206025000 32,0 40,0 0 10 140 760 2206032000 45,0 51,4 5 15 440 700 1005045000 40,0 49,0 0 10 180 1.080 2206040000 28,0 36,0 0 10 125 680 2206028000 38,0 47,0 0 10 170 1.040 2206038000 51,0 57,4 5 15 500 790 1005051000 45,0 54,0 0 10 200 1.200 2206045000 32,0 40,0 0 10 140 760 2206032000 40,0 49,0 0 10 180 1.080 2206040000 63,0 70,0 5 15 630 960 1005063000 51,0 60,0 0 10 230 1.410 2206051000 38,0 47,0 0 10 170 1.040 2206038000 45,0 54,0 0 10 200 1.200 2206045000 76,0 82,4 5 15 750 1.450 1005076000 55,0 64,0 0 10 255 1.600 2206055000 40,0 49,0 0 10 180 1.080 2206040000 51,0 60,0 0 10 230 1.410 2206051000 102,0 108,8 5 15 1.000 1.580 1005102000 60,0 70,0 0 10 270 1.840 2206060000 45,0 54,0 0 10 200 1.200 2206045000 55,0 64,0 0 10 255 1.600 2206055000 110,0 117,2 5 15 1.120 1.730 1005110000 63,5 73,5 0 10 290 1.930 2206063000 51,0 60,0 0 10 230 1.410 2206051000 60,0 70,0 0 10 270 1.840 2206060000 127,0 134,2 5 15 1.250 2.000 1005127000 65,0 75,0 0 10 300 1.980 2206065000 55,0 64,0 0 10 255 1.600 2206055000 63,5 73,5 0 10 290 1.930 2206063000 152,0 159,2 5 15 1.500 2.380 1005152000 76,0 86,0 0 10 380 2.320 2206076000 60,0 70,0 0 10 270 1.840 2206060000 65,0 75,0 0 10 300 1.980 2206065000 203,0 211,4 15 2.000 3.750 1005203000 80,0 90,0 05 6 400 2.430 2206080000 63,5 73,5 0 10 290 1.930 2206063000 76,0 86,0 0 10 380 2.320 2206076000 254,0 264,0 15 2.500 5.680 1005254000 90,0 100,0 05 6 400 2.920 2206090000 65,0 75,0 0 10 300 1.980 2206065000 80,0 90,0 0 6 400 2.430 2206080000 102,0 113,0 0 6 460 3.330 2206102000 76,0 86,0 0 10 380 2.320 2206076000 90,0 100,0 0 6 400 2.920 2206090000 110,0 124,0 0 6 480 4.760 2206110000 80,0 90,0 0 6 400 2.430 2206080000 102,0 113,0 0 3.330 120,0 134,0 0with all the information you need. of6 6 vulcanised Rubber Products). The460 500 5.180will affect2206102000 2206120000 individual conditions of an application the life time of each product. This hose 90,0 specification sheet has been prepared with great care in order to provide you 100,0 0 6 400 2.920 2206090000 Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in 110,0 124,0 0 6 480 4.760 2206110000 is void in the event of misuse 5.440 such as excessive bending, crushing, stretching, use applications not covered in the product data sheet. Codan Rubber recommends regular 127,0 140,0 0maintenance, care and inspection complied 6 with. Codan Rubber’s warranty 650 2206127000 of hoses102,0 before use. Hoses should be replaced if any physical damage is seen, especially 113,0 0 to the cover of the hose or in the with 6 incorrect media or use in environments 460outside the hose specification. 3.330 2206102000 Please contact Codan Rubber for individual product manufacturing tolerances. area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage 120,0 134,0 0 6 500 5.180 2206120000 140,0 154,0 0 6 680 5.970 2206140000 110,0 124,0 0 6 480 4.760 2206110000 127,0 140,0 0 6 650 5.440 2206127000 152,0 168,0 0 6 700 7.780 2206152000 120,0 134,0 0 A/S Valdemarshaab 6 1,DK-4600 Køge,500 5.180 2206120000 Denmark Coda n Rubber Da nma rk 140,0 154,0 0 6 680 5.970 2206140000 203,0 223,0 0 6 1.400 11.840 2206203000 Fax +45 56 64 65 48 Tel . +45 56 64 64 64 i nfo@coda n.com URL: www.coda n.com Mail: 127,0 140,0 0 6 650 5.440 2206127000 152,0 168,0 0 6 700 7.780 2206152000 140,0 154,0 0 6 680 5.970 2206140000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any This hose specification sheet has been prepared with great care in order to provide you with all the information you need. physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products). applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection
152,0
168,0
0
of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
The individual conditions of an application will affect the life time of each product. Therefore please ensure
06/01/2015
resistance to chemicals and cleaning procedures in our written product information is complied with. 6that 700 7.780 2206152000 Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is Please contact Codan Rubber for individual product manufacturing tolerances. complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark
8 January 2015
Codan 1005 Air / Water Hose
OIL HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2901 Oil Hose
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are -carried under type pressure. Codan 2901 BS 3492 D Normally installed using hose clamps, Bauer or Stortz similar.suction Please and contact Codan Black, fittings, flexible,or wrapped pressure for further information. hose for oil and petrol, with double steel helix
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Type nr. 2901 Polyester Outside: NR/SBR Application: Oil/Petrol Colour: StandardBlack Length: 40 metres Standards: Working Temperature: -40°C to 70°C
and anti-static wire. Ideal for mineral oils, e.g. grease, oil and paraffin, and leaded or unleaded petrol. Max. Inside: NBR 50% aromatics. The extremely hard-wearing, Colour: Black weather and ozone-resistant outer rubber Reinforcement: Polyester w/ double steel helix coating ensures long service life. and anti-static wire Ins i de Outs i de Worki ng Burs t Bend Ra di us Wei ght Product Vacuum: Decreasing 90-40%. Pres s ure BAR Outside: CR (mm) di a . (mm) di a . (mm) Pres s ure BAR (g/m) code Suitable for use with DIN clamps. Colour: Black Please 25,0 contact Codan 31,4 for further information. 5 15 Standards: BS 3492 250 type D 420 1005025000 32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
440 Bend Ra di us (mm) 500
700ght Wei (g/m) 790
code 1005051000
10 5
30 15
150 630
790 960
2901025000 1005063000
45,0 Ins i de di51,0 a . (mm) 25,0 63,0
51,4i de Outs di57,4 a . (mm) 35,0 70,0
1005045000 Product
32,0 76,0
42,4 82,4
10 5
30 15
160 750
1.010 1.450
2901032000 1005076000
38,0 102,0
49,6 108,8
10 5
30 15
210 1.000
1.280 1.580
2901038000 1005102000
45,0 110,0
56,6 117,2
10 5
30 15
250 1.120
1.460 1.730
2901045000 1005110000
51,0 127,0
65,0 134,2
10 5
30 15
280 1.250
1.720 2.000
2901051000 1005127000
57,0 152,0
71,4 159,2
10 5
30 15
315 1.500
2.295 2.380
2901057000 1005152000
60,0 203,0
74,4 211,4
10 5
30 15
330 2.000
2.300 3.750
2901060000 1005203000
63,0 254,0
78,6 264,0
10 5
30 15
340 2.500
2.750 5.680
2901063000 1005254000
76,0
91,6
10
30
420
3.215
2901076000
90,0
105,6
10
30
530
3.800
2901090000
102,0
119,0
10
30 610 4.875 2901102000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
127,0
146,6
10
complied with. Codan Rubber’s warranty is void in the event of misuse 6.710 such as excessive bending, crushing, stretching, use 30 715 2901127000
152,0
171,6
10
30
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
910
10.140
2901152000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product 07/01/2015 information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
OIL HOSES
Codan 1005 Air / Water Hose CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2915 Oil Hose
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely Codan 2915 - - space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or Black, heavy-duty, wrapped suction and pressure where liquids are carried under pressure. hose for oil and petrol, with double steel helix Normally installed using hose clamps, Bauer or and anti-static wire. Stortz fittings, or similar. Please contact Codan Ideal for mineral oils, e.g. grease, oil and for further information. paraffin, and leaded or unleaded petrol. Max. 50% aromatics. The extremely hard-wearing, weather and ozone-resistant outer rubber coating ensures long service life. Vacuum: Decreasing 90-40%. Suitable for use with reusable DIN clamps. Please Codan information. Ins i decontactOuts i defor furtherWorki ng di a . (mm)
di a . (mm)
Pres s ure BAR
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Type nr. 2915 Inside: NR/SBR Application: Oil/Petrol Colour: Black Standard Length: 40 metres Reinforcement: Polyester Working Temperature: -40°C to 100°C Outside: NR/SBR Inside: NBR Colour: Black Colour: Black Standards: Reinforcement: Polyester w/ double steel helix and anti-static wire. Outside: CR Colour: Black BursStandards: t Bend Ra di us Wei ght Product
Pres s ure BAR
15
(mm)
(g/m)
code
25,0
31,4
5
250
420
1005025000
32,0 Ins i de
38,4i de Outs
5 ng Worki
15 t Burs
300 Bend Ra di us
520ght Wei
1005032000 Product
di38,0 a . (mm)
di44,4 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 380
(g/m) 610
code 1005038000
45,0 19,0
51,4 30,6
5 16
15 48
440 110
700 710
1005045000 2915019000
51,0 25,0
57,4 36,6
5 16
15 48
500 150
790 900
1005051000 2915025000
63,0 32,0
70,0 44,0
5 16
15 48
630 160
960 1.120
1005063000 2915032000
76,0 38,0
82,4 51,2
5 16
15 48
750 200
1.450 1.375
1005076000 2915038000
102,0 40,0
108,8 53,2
5 16
15 48
1.000 220
1.580 1.425
1005102000 2915040000
110,0 45,0
117,2 57,0
5 16
15 48
1.120 250
1.730 1.720
1005110000 2915045000
127,0 51,0
134,2 64,2
5 16
15 48
1.250 280
2.000 1.900
1005127000 2915051000
152,0 63,0
159,2 79,0
5 16
15 48
1.500 330
2.380 2.880
1005152000 2915063000
203,0 76,0
211,4 92,0
5 16
15 48
2.000 420
3.750 3.380
1005203000 2915076000
254,0 80,0
264,0 96,0
5 16
15 48
2.500 470
5.680 3.870
1005254000 2915080000
90,0
107,2
16
48
530
4.290
2915090000
102,0
121,2
16
48
600
5.370
2915102000
127,0
147,4
16
48 710 7.820will affect2915127000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
152,0
172,8
16
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 48 900 10.240 2915152000 with incorrect media or use in environments outside the hose specification.
203,0
227,8
16
48
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
1.200
14.390
2915203000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the The1,DK-4600 individual conditions of anDenmark application will affect the life time of each product. Therefore please ensure Køge, Coda n Rubber Da nma rk A/S Valdemarshaab information you need. Written advice must be obtained from Codan Rubber before using any hose with that resistance to chemicals and cleaning procedures in our written product information is complied with. untested media or before using in applications covered in the Codan Rubber’s warranty is void in URL: the event of misuse such as excessive bending, crushing, stretching, use Fax data +45sheet. 56 64 65 Rubber 48 Mail:Codan Tel . +45not56 64 64 64product i nfo@coda n.com www.coda n.com recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any with incorrect media or use in environments outside the hose specification. physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products). Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
OIL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1005Oil - Hose Codan 3002 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3002 - Black, high-quality pressure hose with highType nr. 3002 Ins i de Outs i de Worki ng Burs t Bend Ra di us Wei ght Product pressure characteristics that make it suitable for Application: Oil / Grease / Universal di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR (mm) (g/m) code many purposes. Standard Length: 50 metres For use as a universal industry. -40°C 420 to 100°C1005025000 25,0 31,4 hose throughout 5 15 Working Temperature: 250 Its suitability for media rich in mineral oils and Inside: NBR 32,0 chemicals38,4 5 for large 15 Colour: Black 300 520 1005032000 many makes the hose ideal sectors of industry. Reinforcement: PVA 38,0 44,4 5 15 380 610 1005038000 Max. 50% aromatics. Outside: NBR/PVC 45,0 diameters51,4 5 15 Colour: Black 440 700 1005045000 Inside fit standard connectors. Please 51,0 contact Codan 57,4 for further information. 5 15 Standards: - 500 790 1005051000 63,0
70,0
5
15 15
630
960
1005063000
76,0
82,4
5
750
1.450
1005076000
102,0 Ins i de
108,8 Outs i de
5 ng Worki
15 t Burs
1.000 Bend Ra di us
1.580 Wei ght
1005102000 Product
di110,0 a . (mm)
di117,2 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 1.120
(g/m) 1.730
code 1005110000
127,0 4,8
134,2 11,8
5 30
15 100
1.250 35
2.000 128
1005127000 3002005000
152,0 6,3
159,2 14,3
5 25
15 80
1.500 45
2.380 183
1005152000 3002006000
203,0 7,9
211,4 15,9
5 25
15 80
2.000 48
3.750 211
1005203000 3002008000
254,0 9,5
264,0 18,5
5 25
15 80
2.500 56
5.680 279
1005254000 3002010000
12,7
22,7
25
80
70
391
3002013000
15,9
26,9
25
80
81
520
3002016000
19,1 30,1 25 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
80 90 596 3002019000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
22,3
33,3
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 70 110 670 3002022000
25,4
36,4
20
70
with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
120
742
3002025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
OIL HOSES Codan 1005 -
Codan Oil Hose Black,3006 reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
Codan 3006 - -
GAS
99
Ins i de Outs i de Worki ng Burs t Bend Ra di us di a . (mm) a . (mm) pressure Pres s ure BAR BARnr. 3006 (mm) Black, flexible,dianti-static hose for oil. Pres A s ure Type
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
classic oil hose for all-round industrial use, e.g. 25,0 paraffin,31,4 5 diesel, grease and other oil-based media. hard-wearing, weather and 32,0 Extremely 38,4 5 ozone-resistant, self-extinguishing outer CR 38,0 coating. 44,4 rubber Normally installed5using hose clamps, 45,0 but clamp 51,4or screw fittings5 can also be used. Note! Care must be taken to avoid 51,0 57,4 5 damaging the yarn insert. Please 63,0 contact Codan 70,0 for further information. 5
Wei ght (g/m)
Product code
Application: Oil / Grease / Universal 15 Standard Length: 25050 metres 420 1005025000 -40°C 520 to 100°C1005032000 15 Working Temperature: 300 Inside: NBR 15 Colour: Black 380 610 1005038000 Ester 15 Reinforcement: 440 700 1005045000 Outside: CR 15 500 790 1005051000 Colour: Black 15 Standards: - 630 960 1005063000
76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de di127,0 a . (mm)
117,2 Outs i de di134,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.120 Bend Ra di us (mm) 1.250
1.730 Wei ght (g/m) 2.000
1005110000 Product
152,0 6,3 203,0 7,9
159,2 14,3 211,4 15,9
5 20 5 20
15 80 15 80
1.500 20 2.000 25
2.380 191 3.750 221
1005152000 3006006000 1005203000 3006008000
254,0 9,5
264,0 17,5
5 20
15 60
2.500 30
5.680 250
1005254000 3006010000
12,7
21,5
20
60
50
350
3006013000
15,9
24,7
20
60
70
417
3006016000
code 1005127000
19,1
29,5
15
50 588 will affect3006019000 of vulcanised Rubber Products). The90 individual conditions of an application the life time of each product.
22,3
33,1
15
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 50 100 694 3006022000 with incorrect media or use in environments outside the hose specification.
25,4
36,2
15
50
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
120
770
3006025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
OIL HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, Codan 3009 Oil Hose
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de Outs i de Codan 3009 -di a . (mm) di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Black, hose for oil, 25,0 flexible pressure 31,4 5 water and air. 32,0 38,4industrial applications. 5 Universal hose for Dirt-repellent outer 38,0 44,4coating and good 5 ozone and weather resistance. 45,0 51,4using hose clamps 5 or screw Normally installed couplings. 51,0 57,4 5 Please contact Codan for further information. 63,0 70,0 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
76,0
82,4
5
15 Type nr. 3009 250 420 1005025000 Application: Oil / Grease / Universal 15 Standard Length: 30050 metres 520 1005032000 -30°C 610 to 100°C1005038000 15 Working Temperature: 380 Inside: NBR 15 Colour: Black 440 700 1005045000 Polyester 15 Reinforcement: 500 790 1005051000 Outside: NBR/PVC 15 630 960 1005063000 Colour: Black 15 Standards: - 750 1.450 1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 6,3 254,0 8,0
211,4 12,7 264,0 14,4
5 15 5 15
15 45 15 45
2.000 40 2.500 40
3.750 143 5.680 169
1005203000 3009006000 1005254000 3009008000
code 1005152000
10,0
16,4
15
45
50
199
3009010000
13,0
19,6
15
45
65
254
3009013000
15,9
22,9
15
45 323 will affect3009016000 of vulcanised Rubber Products). The80 individual conditions of an application the life time of each product.
19,1
27,0
15
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 45 95 433 3009019000 with incorrect media or use in environments outside the hose specification.
25,4
34,4
15
45
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
125
561
3009025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
OIL HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, Codan 3010 Oil Hose
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de Outs i de Codan 3010 -di a . (mm) di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Black, hose for oil, 25,0 flexible pressure 31,4 5 water and air. 32,0 38,4industrial applications. 5 Universal hose for Dirt-repellent outer 38,0 44,4coating and good 5 ozone and weather resistance. 45,0 51,4using hose clamps 5 or screw Normally installed couplings. 51,0 57,4 5 Please contact Codan for further information. 63,0 70,0 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
76,0
82,4
5
15 Type nr. 3010 250 420 1005025000 Application: Oil / Grease / Universal 15 Standard Length: 30050 metres 520 1005032000 -30°C 610 to 100°C1005038000 15 Working Temperature: 380 Inside: NBR 15 Colour: Black 440 700 1005045000 Polyester 15 Reinforcement: 500 790 1005051000 Outside: NBR/PVC 15 630 960 1005063000 Colour: Black 15 Standards: - 750 1.450 1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 6,3 254,0 8,0
211,4 12,7 264,0 14,4
5 15 5 15
15 45 15 45
2.000 40 2.500 40
3.750 143 5.680 169
1005203000 3010006000 1005254000 3010008000
code 1005152000
10,0
16,4
15
45
50
199
3010010000
13,0
19,6
15
45
65
254
3010013000
15,9
22,9
15
45 323 will affect3010016000 of vulcanised Rubber Products). The80 individual conditions of an application the life time of each product.
19,1
27,0
15
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 45 95 433 3010019000 with incorrect media or use in environments outside the hose specification.
25,4
34,4
15
45
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
125
561
3010025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
OIL HOSES Codan 1005 -
Codan 3011 Oil Hose Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
Codan 3011 - -
GAS
99
Ins i de Outs i de Worki ng Black, smooth,diflexible di a . (mm) a . (mm)pressure Preshose s ure with BAR
HYDRAULIC
110
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Burs t Bend Ra di us Type Pres s ure BARnr. 3011 (mm)
improved inner rubber coating resistant to all 25,0 31,4 on the market. 5 new oils and greases Good weather and ozone-resistant 32,0 38,4 5outer coating. For use throughout industry for oil, air, water 38,0 5 and chemicals. 44,4 Installed using screw couplings or 45,0 51,4 5fittings and hose clamps as required. 51,0 contact Codan 57,4 for further information. 5 Please
Wei ght (g/m)
Product code
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
63,0
70,0
5
Application: Oil / Grease / Universal 15 Standard Length: 25050 metres 420 1005025000 Working Temperature: -40°C to 100°C 15 300 520 1005032000 Inside: NBR 15 Colour: Black 380 610 1005038000 Polyester 15 Reinforcement: 440 700 1005045000 Outside: NBR/EPDM 15 Colour: Black 500 790 1005051000 15 Standards: - 630 960 1005063000
STEAM
179
76,0
82,4
5
15
750
1.450
1005076000
WELDING & GAS
182
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de
117,2 Outs i de
5 ng Worki
15 t Burs
1.120 Bend Ra di us
1.730 Wei ght
1005110000 Product
di127,0 a . (mm)
di134,2 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 1.250
(g/m) 2.000
code 1005127000
5,0 152,0
11,4 159,2
20 5
60 15
35 1.500
110 2.380
3011005000 1005152000
6,3 203,0
12,7 211,4
20 5
60 15
45 2.000
130 3.750
3011006000 1005203000
8,0 254,0
14,4 264,0
20 5
60 15
55 2.500
150 5.680
3011008000 1005254000
10,0
17,0
20
60
70
205
3011010000
12,5
21,5
20
60
90
330
3011013000
MATERIAL HANDLING 120
INDEX
16,0
25,4
20
60 110 415 3011016000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
20,0
30,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 140 540 3011019000
25,0
36,0
20
Please contact Codan Rubber for individual product manufacturing tolerances. 60 170 725
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification.
3011025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
OIL HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de Outs i de Codan 3012 di a . (mm) di a . (mm)
Worki ng Pres s ure BAR
82,4
5
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 6,0 254,0 8,0
211,4 14,0 264,0 16,0
5 25 5 25
15 75 15 75
2.000 60 2.500 80
3.750 190 5.680 220
1005203000 3012006000 1005254000 3012008000
51,0
57,4
5
POWERSTEERING
164
63,0
70,0
5
PVC
167
INDEX
Product code
76,0
148
182
Wei ght (g/m)
102,0
PETROL
WELDING & GAS
Bend Ra di us (mm)
15 Type nr. 3012 250 420 1005025000 Application: Oil / Grease / Universal 15 Standard Length: 30050 metres 520 1005032000 -25°C 610 to 100°C1005038000 15 Working Temperature: 380 Inside: NBR 15 Colour: Black 440 700 1005045000 15 Reinforcement: 500 790 1005051000 Outside: NBR/PVC 15 630 960 1005063000 Colour: Black 15 Standards: 750 1.450 1005076000
130
179
Burs t Pres s ure BAR
Long hose for transfer and 25,0length fuel 31,4 5 delivery of mineral oils, greases and petroleum based 32,0 5 content of products up to a38,4 maximum aromatic 50%. conductive: R < 10^6 38,0Electrically44,4 5 Ohm/m (ISO 8031:2009). 45,0 51,4 5
OIL
STEAM
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, Codan 3012 Oil Hose
code 1005152000
10,0
18,0
25
75
100
251
3012010000
13,0
18,0
25
75
120
352
3012013000
16,0
25,0
25
75 150 415 will affect3012016000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
19,0
29,0
25
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 75 180 593 3012019000 with incorrect media or use in environments outside the hose specification.
25,0
36,0
25
75
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
240
785
3012025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
OIL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3020 Oil Hose
Ins i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
31,4
5
15
250
420
32,0 Codan 302038,4 --
5
25,0
Outs i de di a . (mm)
38,0 44,4 5 Black, flexible pressure hose for oil, 45,0 51,4 5 water and air. 51,0 57,4industrial applications. 5 Universal hose for Dirt-repellent outer 63,0 70,0coating and good 5 ozone and weather resistance. 76,0 82,4using hose clamps 5 or screw Normally installed couplings. 102,0 108,8 5 Please contact Codan for further information. 110,0 117,2 5
Product code
1005025000
15
300
520
1005032000
15
380
610
1005038000
127,0
134,2
5
15 Type nr. 3020 440 700 1005045000 Application: Oil / Grease / Universal 15 Standard Length: 50050 metres 790 1005051000 -30°C 960 to 100°C1005063000 15 Working Temperature: 630 Inside: NBR 15 Colour: Black 750 1.450 1005076000 Reinforcement: 15 1.000 1.580 1005102000 Outside: NBR/PVC 15 Colour: Black 1.120 1.730 1005110000 15 Standards: - 1.250 2.000 1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
60
55
200
3020010000
10,0
16,4
20
code
13,0 19,6 20 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
60 70 260 3020013000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
19,1
27,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 100 450 3020019000 with incorrect media or use in environments outside the hose specification.
25,4
34,4
20
60
Please contact Codan Rubber for individual product manufacturing tolerances.
135
570
3020025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
OIL HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Codan 3217 Oil Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0 5 Codan 321744,4 - NFT47-255: 1984
45,0 51,4 5 Black, wrapped petrol tanker hose, 51,0 57,4 5to NFT 47255, 1984. 63,0 5 For mineral Lightweight hose70,0 suitable for reeling. oils, diesel oil, etc. Anti-static outer 76,0petroleum,82,4 5 rubber coating ensures charge elimination 102,0 use. 108,8 5 during Max. 40% aromatics. 110,0 117,2 5 Please contact Codan for further information. 127,0 134,2 5
15
380
610
1005038000
15
440
700
1005045000
152,0
159,2
5
15 Type nr. 3217 500 790 1005051000 Application: Petrol Tanker Hose 15 Standard Length: 63050 metres 960 1005063000 -30°C1.450 to 100°C1005076000 15 Working Temperature: 750 Inside: NBR 15 Colour: Black 1.000 1.580 1005102000 Reinforcement: PVA 15 1.120 1.730 1005110000 Outside: NBR/PVC 15 Colour: Black 1.250 2.000 1005127000 1984 2.380 15 Standards: NFT47-255: 1.500 1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0
264,0
5
15
2.500
5.680
1005254000
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
31,8
44,8
15
60 1.082will affect3217032000 of vulcanised Rubber Products). The135 individual conditions of an application the life time of each product.
34,8
47,9
15
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 145 1.169 3217035000 with incorrect media or use in environments outside the hose specification.
38,1
51,7
15
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
155
1.324
3217038000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
PETROL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
2903
3421
3106
3423
3111
3424
3121
3122
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
3123
3133
3135
INDEX
6136
3140
3418
3419
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
PETROL HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2903 Petrol Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
15
380
610
1005038000
15 Type nr. 2903 440
700
1005045000
Codan 290344,4 -38,0
5
45,0 51,4 corrugated suction 5 Lightweight, flexible, and pressure oil and leaded or5 unleaded 51,0 hose for 57,4 petrol. 63,0 70,0 5 Max. 50% aromatics. 76,0 90%. 82,4 5 Vacuum: Supplied with steel helix and charge 102,0 108,8 5 eliminator wire. 110,0 contact 117,2 5 Please Codan for further information.
OIL
130
PETROL
148
POWERSTEERING
164
127,0
134,2
5
PVC
167
152,0
159,2
5
/ Petrol 15 Application: Oil500 790 1005051000 Standard Length: 40 metres 630 960 1005063000 Working Temperature: -30°C to 100°C 15 Inside: NBR 750 1.450 1005076000 Colour: Black 15 1.000 1.580 1005102000 Reinforcement: Polyester w/ double steel helix 15 and anti-static 1.120 1.730 1005110000 wire Outside: CR 15 1.250 2.000 1005127000 Colour: Black 15 Standards: - 1.500 2.380 1005152000
STEAM
179
203,0
211,4
5
15
2.000
3.750
1005203000
WELDING & GAS
182
254,0
264,0
5
15
2.500
5.680
1005254000
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
MATERIAL HANDLING 120
INDEX
15
Product code
51,0
63,0
5
of vulcanised Rubber Products). The150 individual conditions of an application the life time of each product. 15 1.770will affect2903051000
76,0
86,5
5
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 15 200 2.120 2903076000 with incorrect media or use in environments outside the hose specification.
102,0
115,0
5
15
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
250
3.550
2903102000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
PETROL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1005 Air / Water Hose Codan 3106 Petrol Hose
Codan 1005 Codan 3106 - -
Black, reinforced, layflat water hose. Easy to handle extremely space-saving. Flexible, Flexible,and black, braided hose for leaded or even whenpetrol. used at low temperatures. Often used unleaded For fuel pipes, e.g. connecting on building sites for immersion pumps, etc. or carburettor and fuel pump, in cars, motorcycles, where liquids aretractors, carried etc. under pressure. mopeds, garden Based on DIN Normally installed usinginstalled hose clamps, 73379 B:1984. Normally usingBauer hose or Stortz fittings, or similar. Codan clamps. Must not be usedPlease in carscontact with injection for further information. systems. Please contact Codan for further information.
Ins i de diIns a . (mm) i de di a . (mm)
25,0 3,2 32,0 3,5 38,0
Outs i de diOuts a . (mm) i de di a . (mm)
31,4 7,2 38,4 7,5 44,4
Type nr. 1005 Application: Air / Water Hose Type nr. 3106 Standard Length: metres Application: Petrol40 / Diesel Working -30°C to 90°C StandardTemperature: Length: 30 metres Inside: NR/SBR Working Temperature: -30°C to 100°C Colour: Black Inside: NBR/PVC Reinforcement: Colour: Black Polyester Outside: NR/SBRReinforcement: Colour: Outside:Black Polyester Standards: Colour: Black Standards: -
Worki ng Pres s ureng BAR Worki Pres s ure BAR
Burs t PresBurs s uretBAR Pres s ure BAR
Bend Ra di us (mm) Bend Ra di us (mm)
Wei ght (g/m) Wei ght (g/m)
420 44 520 46 610
1005025000 3106032000 1005032000 3106035000 1005038000
5 13 5 13 5
15 50 15 50 15
250 20 300 20 380
Product code Product code
4,0 45,0 4,5 51,0
9,0 51,4 9,5 57,4
11 5 11 5
45 15 45 15
20 440 20 500
68 700 73 790
3106040000 1005045000 3106045000 1005051000
5,0 63,0 5,5 76,0
10,0 70,0 10,5 82,4
10 5 10 5
42 15 39 15
20 630 20 750
80 960 85 1.450
3106050000 1005063000 3106055000 1005076000
6,0 102,0 6,5 110,0
11,0 108,8 11,5 117,2
10 5 10 5
39 15 39 15
20 1.000 20 1.120
90 1.580 95 1.730
3106060000 1005102000 3106065000 1005110000
7,0 127,0 7,5 152,0
12,0 134,2 12,5 159,2
59 59
35 15 35 15
20 1.250 30 1.500
100 2.000 105 2.380
3106070000 1005127000 3106075000 1005152000
8,0 203,0 9,0 254,0
13,0 211,4 14,0 264,0
58 6 5
32 15 23 15
30 2.000 40 2.500
110 3.750 123 5.680
3106080000 1005203000 3106090000 1005254000
9,5
15,0
6
23
40
130
3106095000
10,0
15,0
6
23
40
133
3106100000
20
40
144
3106110000
11,0
16,0
5
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
12,0
17,0
5
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is 20 40 160 3106120000 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
12,7
17,7
5
Please contact Codan Rubber for individual 15 40product manufacturing tolerances. 180
with incorrect media or use in environments outside the hose specification.
3106127000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
PETROL HOSES Codan 1005 Air / Water Hose CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 3111 Petrol Hose
Codan 1005 Black, reinforced, layflat water hose. Easy to Codan 3111 - SAE 30 R6 Flexible, handle and extremely space-saving. even when used at low temperatures. Often used on building sites for for immersion pumps, etc. or Flexible, black hose leaded and unleaded where areR6. carried under pressure. petrol,liquids to SAE 30 Normally installed usingResistant hose clamps, Good ozone resistance. to oil Bauer spray or in Stortz or similar. Please contact Codan enginefittings, compartments. for information. For further fuel pipes in cars, lorries, lawn mowers, garden cultivators, etc. Please contact Codan for further information.
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Ins25,0 i de di a . (mm) 32,0
31,4i de Outs di38,4 a . (mm)
5 ng Worki Pres s5ure BAR
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Type nr. 3111 Inside: NR/SBR Application: Petrol / Diesel Colour: StandardBlack Length: 50 metres Reinforcement: Polyester Working Temperature: -30°C to 90°C Outside: NR/SBR Inside: NBR Colour: Black Standards: Reinforcement: PVA Outside: NBR/PVC Colour: Black Standards: SAE 30 R6
Burs t Pres s ure BAR
15 Burs t Pres15 s ure BAR
Bend Ra di us (mm)
250Ra di us Bend (mm) 300
Wei ght (g/m)
Product code
420 Wei ght 1005025000 Product (g/m) 520
code 1005032000
38,0 3,2
44,4 9,2
55
15 50
380 15
610 95
1005038000 311103200
45,0 3,5
51,4 9,5
55
15 50
440 15
700 98
1005045000 311103500
51,0 4,0
57,4 10,0
55
15 50
500 15
790 100
1005051000 311104000
63,0 4,8
70,0 10,8
55
15 50
630 15
960 110
1005063000 311104800
76,0 5,0
82,4 11,0
55
15 50
750 20
1.450 120
1005076000 311105000
102,0 5,5
108,8 11,5
55
15 50
1.000 20
1.580 125
1005102000 311105500
110,0 6,0
117,2 12,0
55
15 50
1.120 20
1.730 130
1005110000 311106000
127,0 6,3
134,2 12,7
55
15 50
1.250 20
2.000 130
1005127000 311106300
152,0 7,9
159,2 14,7
55
15 50
1.500 45
2.380 160
1005152000 311107900
203,0 8,0
211,4 14,0
55
15 50
2.000 25
3.750 180
1005203000 311108000
254,0 9,5
264,0 16,7
55
15 50
2.500 40
5.680 200
1005254000 311109500
10,0
17,0
5
50
40
230
311110000
11,0
18,2
5
50
45
250
311111000
12,7
19,7
5
50
50
257
311112700
13,0
20,0
5
50
50
270
311113000
16,0
24,0
5
50
80
320
311116000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the The individual conditions of an application will affect the life time of each product. Therefore please ensure information you need. Written adviceCoda must benobtained from Codan Rubberrk before any hose with that1,DK-4600 resistance to chemicals cleaning procedures in our written product information is complied with. Køge, and Denmark Rubber Da nma A/SusingValdemarshaab untested media or before using in applications not covered in the product data sheet. Codan Rubber Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use +45 56be64 65 48 Tel +45 56of hoses 64 64 64use.Fax i nfo@coda n.com URL: www.coda recommends regular maintenance, care and.inspection before Hoses should replaced if anyMail: with incorrect media or use in environments outside the hose n.com specification. physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products). Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
PETROL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3121 Petrol Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Codan 3121 - -
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
15
250
420
25,0 31,4 5 Flexible, 32,0 green hose 38,4 for leaded or unleaded 5 petrol. Good weather and ozone resistance and 38,0resistance44,4 5 good to oil spray in engine compartments of cars. 45,0 51,4 5 Please contact Codan for further information. 51,0 57,4 5
Product code
1005025000
OIL
130
PETROL
148
POWERSTEERING
164
76,0
82,4
5
PVC
167
102,0
108,8
5
15 Type nr. 3121 300 520 1005032000 Application: Petrol / Diesel 15 Standard Length: 38050 metres 610 1005038000 Working Temperature: -35°C to 135°C 15 440 700 1005045000 Inside: NBR/PVC 15 Colour: Black 500 790 1005051000 Polyester 15 Reinforcement: 630 960 1005063000 Outside: CSM 15 Colour: Green 750 1.450 1005076000 15 Standards: - 1.000 1.580 1005102000
STEAM
179
110,0
117,2
5
15
1.120
1.730
1005110000
WELDING & GAS
182
127,0
134,2
5
15
1.250
2.000
1005127000
152,0 Ins i de
159,2 Outs i de
5 ng Worki
15 t Burs
1.500 Bend Ra di us
2.380 Wei ght
1005152000 Product
di203,0 a . (mm)
di211,4 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 2.000
(g/m) 3.750
code 1005203000
254,0 4,0
264,0 10,8
5
15 30
2.500 33
5.680 118
1005254000 3121040000
4,8
11,6
5
30
35
129
3121048000
5,6
12,4
5
30
37
140
3121056000
MATERIAL HANDLING 120
INDEX
63,0
70,0
5
6,3 13,1 5 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
30 40 150 3121063000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
7,6
14,4
5
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 30 43 170 3121076000
9,5
16,3
5
30
with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
49
198
3121095000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
PETROL HOSES Codan 1005 -
Codan Petrol Hose Black,3122 reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
Codan 3122 - SAE J30 R6,R7, R8, R11
GAS
99
Ins i de Outs i de Worki ng di a . (mm)blackdihose a . (mm) Pres s ure BAR Flexible, for leaded and unleaded
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Burs t Bend Ra di us Pres s ure BARnr. 3122 (mm) Type
petrol. Good ozone resistance. Resistant to oil 25,0 in engine 31,4 spray compartments. For5fuel pipes in cars, mowers, garden5cultivators, 32,0lorries, lawn 38,4 etc. The hose is based on SAE J30 R6, R7, R8, R11 38,0 44,4 5 [1998] Please 45,0 contact Codan 51,4 for further information. 5
Wei ght (g/m)
Application: Petrol / Diesel 15 Standard Length: 25050 metres 420
Product code
1005025000
63,0
70,0
5
-40°C 520 to 135°C1005032000 15 Working Temperature: 300 Inside: NBR/PVC 15 Colour: Black 380 610 1005038000 Polyester 15 Reinforcement: 440 700 1005045000 Outside: CPE 15 500 790 1005051000 Colour: Black J30 R6,R7, R8, 960 R11 15 Standards: SAE630 1005063000
76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de di127,0 a . (mm)
117,2 Outs i de di134,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.120 Bend Ra di us (mm) 1.250
1.730 Wei ght (g/m) 2.000
1005110000 Product
152,0 4,0 203,0 4,8
159,2 10,8 211,4 11,6
5 5
15 30 15 30
1.500 33 2.000 35
2.380 111 3.750 122
1005152000 3122040000 1005203000 3122048000
254,0 5,6
264,0 12,6
5
15 30
2.500 37
5.680 140
1005254000 3122056000
6,3
13,3
5
30
40
150
3122063000
7,6
14,6
5
30
43
170
3122076000
51,0
57,4
5
code 1005127000
9,5
16,5
5
30 198 will affect3122095000 of vulcanised Rubber Products). The49 individual conditions of an application the life time of each product.
12,0
19,0
5
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 30 57 236 3122120000 with incorrect media or use in environments outside the hose specification.
15,6
22,4
5
30
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
62
297
3122156000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
PETROL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3123 Petrol Hose
Ins i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
31,4
5
15
250
420
32,0 Codan 312338,4 --
5
25,0
Outs i de di a . (mm)
38,0 44,4 5 Flexible, black hose for leaded and 45,0 51,4 5unleaded petrol. 51,0 ozone resistance. 57,4 5 oil spray in Good Resistant to engine 63,0 compartments. 70,0 5 For fuel pipes in cars, lorries, lawn mowers, 76,0 cultivators, 82,4etc. 5 garden Please contact Codan for further information. 102,0 108,8 5
Product code
1005025000
15
300
520
1005032000
15
380
610
1005038000
OIL
130
PETROL
148
POWERSTEERING
164
110,0
117,2
5
PVC
167
127,0
134,2
5
15 Type nr. 3123 440 700 1005045000 Application: Petrol / Diesel 15 Standard Length: 50050 metres 790 1005051000 -40°C 960 to 100°C1005063000 15 Working Temperature: 630 Inside: NBR 15 Colour: Black 750 1.450 1005076000 Reinforcement: PVA 15 1.000 1.580 1005102000 Outside: NBR/EPDM 15 Colour: Black 1.120 1.730 1005110000 15 Standards: - 1.250 2.000 1005127000
STEAM
179
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
30
0
110
3123005000
MATERIAL HANDLING 120
WELDING & GAS INDEX
182
5,7
12,0
5
code
6,3 13,0 5 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
30 0 130 3123006000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
7,7
14,0
5
complied with. Codan Rubber’s warranty 0 is void in the event of misuse such as excessive bending, crushing, stretching, use 30 150 3123007000 with incorrect media or use in environments outside the hose specification.
9,5
16,0
5
30
Please contact Codan Rubber for individual product manufacturing tolerances.
0
230
3123010000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
PETROL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 3133 Hose Codan 1005Petrol Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3133 - SAE J30 R9 and MGRES22RU49 Class 1A Black, flexible hose for fuel in automotive or Type nr. 3133 Ins i deapplication. Outs i High de resistance Workitongall above BursApplication: t Bend Ra di us ght Product engine Petrol / Diesel /Wei Bio-diesel di a . (mm) di a . (mm) ure BAR Pres s ure BAR (mm) code media and especially used inPres Car,s Truck, Standard Length: 50 metres (g/m) Agricultural and Construction equipment Working Temperature: -30°C to 130°C 25,0 for fuel31,4 15 Inside: FKM/NBR 250 420 1005025000 vehicles injection systems 5High temp hose for Petrol 32,0with low permeation 38,4 5 at lless than 15 Colour: Black 300 520 1005032000 15g/m2/24hrsNormally installed using crimped Reinforcement: PET 38,0 or petrol 44,4 5 for petrol, 15 Outside: CPE 380 610 1005038000 ferrules hose clips. Suitable diesel, ethanol, gasoline, oxidized sour gas, oil, Colour: Black 45,0 51,4 5 15 440 700 1005045000 bio-diesel Standards: SAE J30 R9 and MGRES22RU49 Class 51,0 57,4 5 15 500 790 1005051000 Intermittent Temperature: +150C 1A Please 63,0 contact Codan 70,0 for further information. 5 15 630 960 1005063000 76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de di127,0 a . (mm)
117,2 Outs i de di134,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.120 Bend Ra di us (mm) 1.250
1.730 Wei ght (g/m) 2.000
1005110000 Product
152,0 4,8
159,2 11,8
5 10
15 62
1.500 46
2.380 195
1005152000 3133048000
203,0 5,6
211,4 12,0
5 10
15 62
2.000 52
3.750 130
1005203000 3133056000
254,0 6,3
264,0 12,7
5 10
15 62
2.500 56
5.680 150
1005254000 3133006000
7,0
14,6
10
62
60
195
3133007000
7,1
13,2
10
62
60
195
3133071000
code 1005127000
7,9
14,5
10
62 58 180 3133008000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
9,5
16,5
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 62 62 230 3133095000 with incorrect media or use in environments outside the hose specification.
15,6
22,4
10
62
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
76
271
3133016000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
PETROL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1005 Air / Water Hose Codan 3135 Petrol Hose
Codan 1005 Codan 3135 - DIN 73379-1:1997
Black, reinforced, layflat water hose. Easy to handle extremely Flexible, Flexible,and black hose forspace-saving. leaded and unleaded even when used at low temperatures. used petrol Acc. to DIN 73379-1:1997. GoodOften ozone on buildingResistant sites for immersion etc. or resistance. to oil spraypumps, in engine where liquids are under pressure. compartments. Forcarried fuel pipes in cars, lorries, Normally installed using hose clamps, Bauer or lawn mowers, garden cultivators, etc. Tolerances Stortz fittings, or similar. Please contact dimensions acc. DIN 1307, Available on Codan for further information. plasticspolls in various lengths.
Type nr. 1005 Application: Air / Water Hose Type nr. 3135 Standard Length: metres Application: Petrol40 / Diesel Working -30°C to 90°C StandardTemperature: Length: - metres Inside: NR/SBR Working Temperature: -30°C to 100°C Colour: Black Inside: NBR Reinforcement: Colour: Black Polyester Outside: NR/SBRPVA Reinforcement: Colour: Black Outside: CR Standards: Colour: Black
Please contact Codan for further information.
Standards: DIN 73379-1:1997
Ins i de di a . (mm) Ins i de di25,0 a . (mm)
Outs i de di a . (mm) Outs i de di31,4 a . (mm)
Worki ng Pres s ure BAR Worki ng Pres s 5 ure BAR
Burs t Pres s ure BAR Burs t Pres s15 ure BAR
Bend Ra di us (mm) Bend Ra di us (mm) 250
Wei ght (g/m) Wei ght (g/m) 420
Product code Product code 1005025000
3,0 32,0
9,0 38,4
10 5
30 15
38 300
80 520
3135030000 1005032000
3,5 38,0
9,5 44,4
10 5
30 15
38 380
85 610
3135035 1005038000
4,0 45,0
10,0 51,4
10 5
30 15
40 440
90 700
3135040000 1005045000
4,5 51,0
10,5 57,4
10 5
30 15
43 500
94 790
3135045000 1005051000
5,0 63,0
11,0 70,0
10 5
30 15
45 630
102 960
3135050000 1005063000
5,3 76,0
11,3 82,4
10 5
30 15
46 750
108 1.450
3135053000 1005076000
5,5 102,0
11,5 108,8
10 5
30 15
48 1.000
115 1.580
3135055000 1005102000
6,0 110,0
12,0 117,2
10 5
30 15
50 1.120
120 1.730
3135060000 1005110000
7,0 127,0
13,0 134,2
10 5
30 15
55 1.250
122 2.000
3135070000 1005127000
7,3 152,0
13,3 159,2
10 5
30 15
60 1.500
124 2.380
3135073000 1005152000
7,5 203,0
13,0 211,4
10 5
30 15
60 2.000
126 3.750
3135075000 1005203000
8,0 254,0
14,0 264,0
10 5
30 15
63 2.500
154 5.680
3135080000 1005254000
9,0
15,0
10
30
70
160
3135090000
9,3
15,3
10
30
70
165
3135093000
10,0
17,0
10
30 70 168 3135100000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
11,0
18,0
10
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, 3135110 crushing, stretching, use 30 75 122
12,0
19,0
10
Please contact Codan Rubber for individual product manufacturing tolerances. 30 80 180
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification.
3135120000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
PETROL HOSES Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Black, reinforced, layflat water hose. Easy to Codan 3136 Petrol Hose handle and extremely space-saving. Flexible,
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan - iSAE Ins i de 3136 Outs de di a . (mm) di a . (mm)
J30R12 Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
15
1.000
1.580
1005102000
Black flexible hose for fuel in automotive or 25,0 applications. 31,4 High resistance 5 to all above engine media 32,0 and especially 38,4 used in Car, Truck, 5 Agricultural and Construction equipment 38,0 for fuel44,4 vehicles injection systems.5High temp. hose with low permeation for Petrol 45,0 51,4 5 at less than 15mg/m2/24hrs. Normally installed using 51,0 ferrules57,4 5 Suitable crimped or petrol hose clips. for petrol, diesel, ethanol, gasoline, 63,0 70,0 5 oxidized sour gas, oil and bio-diesel. Intermittent 76,0 82,4 5 temperature: + 150C. Please Codan for further information. 102,0 contact 108,8 5
Product code
Type nr. 3136 15 Application: Petrol 250 / Diesel 420 1005025000 15 Standard Length: 30050 metres 520 1005032000 Working Temperature: -40°C to 150°C 15 Inside: FKM + ECO 380 610 1005038000 Colour: Black 15 440 700 1005045000 Reinforcement: ARAMID 15 Outside: ECO 500 790 1005051000 15 Colour: Black 630 960 1005063000 Standards: SAE J30R12 15 750 1.450 1005076000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0
134,2
5
15
1.250
2.000
1005127000
Ins152,0 i de di a . (mm) 203,0
159,2 Outs i de di211,4 a . (mm)
5 ng Worki Pres s5ure BAR
Burs15 t Pres s ure BAR 15
1.500 Bend Ra di us (mm) 2.000
2.380 Wei ght 1005152000 Product (g/m) 1005203000 code 3.750
254,0 4,8
264,0 10,8
5 20
15 60
2.500 32
5.680 -
1005254000 3136048
5,0
12,2
20
60
35
180
3136050
5,5
12,5
10
80
35
183
3136048
7,5 14,5 20 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
60 40 225 3136075 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
7,9
15,1
20
9,5
16,5
20
60
40
230
3136079
60
50
250
3136095
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
PETROL HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 3140 Petrol Hose Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan Codan - ISO 7840 - A1/A2 for further3140 information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards: Black, flexible petrol hose with fire-retardant Type nr. 3140 outer rubber coating, to ISO 7840 A1 and A2. Application: Marine Petrol / Diesel Hoses with diameters greater than 10 mm are Standard Length: 50 metres supplied in accordance with A2, wrapped and in Working Temperature: -30°C to 100°C max. 40 m lengths. Suitable for fuel pipes in Inside: NBR Ins i depleasureOuts i deless than 15 Worki nglength BursColour: t Bend Ra di us Wei ght Product small boats m in Black di a . (mm) (mm) engines. Pres s ure BAR Pres s ure BAR (mm) (g/m) code with outboarddiora .inboard Reinforcement: Ester For safety reasons, Codan recommends that Outside: CR 25,0 31,4 5 15 250 420 1005025000 stainless fittings be used with the hose. Colour: Black 32,0 contact Codan 38,4 for further information. 5 15 Standards: ISO300 1005032000 Please 7840 - A1/A2 520 38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
51,0 Ins i de di63,0 a . (mm)
57,4i de Outs di70,0 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
500 Bend Ra di us (mm) 630
790ght Wei (g/m) 960
code 1005063000
1005051000 Product
76,0 6,3 102,0 8,0
82,4 15,0 108,8 17,0
5 3 5 3
15 14 15 14
750 68 1.000 75
1.450 273 1.580 315
1005076000 3140006000 1005102000 3140008000
110,0 10,0 127,0 12,5
117,2 19,0 134,2 22,0
5 3 5 15
15 14 15 45
1.120 83 1.250 120
1.730 356 2.000 400
1005110000 3140010000 1005127000 3140013000
152,0 15,9 203,0 19,1
159,2 26,0 211,4 30,0
5 15 5 15
15 45 15 45
1.500 150 2.000 190
2.380 550 3.750 630
1005152000 3140016000 1005203000 3140019000
254,0 25,4
264,0 37,0
5 15
15 45
2.500 250
5.680 790
1005254000 3140025000
32,0
44,0
15
45
320
950
3140032000
38,0
50,0
15
45
400
1.190
3140040000
63,0 This hose 51,0 specification sheet has been prepared with great care in order to provide 15 you with all the information you need.
45 500 2.026will affect3140050000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
63,0
75,0
15
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 45 600 2.380 3140060000 with incorrect media or use in environments outside the hose specification.
75,0
88,0
15
45
Please contact Codan Rubber for individual product manufacturing tolerances.
650
2.430
3140075000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015 This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
PETROL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3418 Petrol Hose
Ins i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
31,4
5
15
250
420
32,0 Codan 341838,4 --
5
25,0
Outs i de di a . (mm)
38,0 44,4 5 Black, smooth, flexible hose with fabric 45,0 51,4 5 reinforcement (single charge eliminator wire) for 51,0 57,4 5 use on petrol pumps. Specially designed Good 63,0 70,0for low temperatures. 5 weather and ozone resistance, with hard-wearing 76,0 surface. Fits 82,4 5 brass outer standard, reusable, petrol pump connectors. 102,0 108,8 5 Please contact Codan for further information. 110,0 117,2 5
Product code
1005025000
15
300
520
1005032000
15
380
610
1005038000
127,0
134,2
5
15 Type nr. 3418 440 700 Application: Diesel / Pumps 15 Standard Length: 50050 metres 790 -55°C 960 to 80°C 15 Working Temperature: 630 Inside: NBR 15 Colour: Black 750 1.450 Reinforcement: PVA, Anti-static wire 15 1.000 1.580 Outside: CR 15 Colour: Black 1.120 1.730 15 Standards: - 1.250 2.000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
80
100
433
3418015000
15,0
25,0
20
1005045000 1005051000 1005063000 1005076000 1005102000 1005110000 1005127000
code
15,9 25,9 20 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
80 105 451 3418016000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
19,1
31,1
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 80 125 647 3418019000 with incorrect media or use in environments outside the hose specification.
25,4
37,4
20
80
Please contact Codan Rubber for individual product manufacturing tolerances.
150
803
3418025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PETROL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3419 Petrol Hose
Ins i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
31,4
5
15
250
420
1005025000
32,0 Codan 341938,4 --
5
15
300
520
1005032000
25,0
Outs i de di a . (mm)
38,0 44,4 5 Black, flexible hose with fabric reinforcement 45,0 51,4 5 and conducting inner rubber coating. 51,0 For use on petrol57,4 pumps for all fuel5 types, including unleaded 63,0 70,0and diesel. Oil,5weather and ozone-resistant CSM rubber ensures long service 76,0 82,4 5 life and colour stability. Fits standard, reusable petrol pump connectors. 102,0 108,8 5 Please contact Codan for further information. 110,0 117,2 5 134,2
5
380 610 Type nr. 3419 440 700 Application: Petrol / Diesel / Pumps 15 Standard Length: 50050 metres 790 Working Temperature: -30°C 960 to 80°C 15 630 Inside: NBR 15 Colour: Black 750 1.450 Reinforcement: PVA 15 1.000 1.580 Outside: CSM 15 Colour: Black 1.120 1.730 15 Standards: - 1.250 2.000
Product code
15
1005038000
15
1005045000 1005051000 1005063000 1005076000 1005102000 1005110000
PVC
167
127,0
STEAM
179
152,0
159,2
5
15
1.500
2.380
1005152000
WELDING & GAS
182
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de
264,0 Outs i de
5 ng Worki
15 t Burs
2.500 Bend Ra di us
5.680 Wei ght
1005254000 Product
di a . (mm)
di a . (mm)
Pres s ure BAR
Pres s ure BAR
(mm)
(g/m)
80
100
440
INDEX
15,0
25,0
20
1005127000
code
3419150000
15,9 25,9 20 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
80 110 459 3419159000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
19,1
31,1
20
80 125 666 3419191000 complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
25,4
38,4
20
Please contact Codan Rubber for individual product manufacturing tolerances. 80 154 915
with incorrect media or use in environments outside the hose specification.
3419254000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
PETROL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3421 Petrol Hose
Ins i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
31,4
5
15
250
420
1005025000
32,0 Codan 342138,4 --
5
15
300
520
1005032000
15
380
610
25,0
Outs i de di a . (mm)
38,0 44,4 5 Red, with fabric reinforcement and 45,0flexible hose 51,4 5 conducting inner rubber coating. 51,0 For use on petrol57,4 pumps for all fuel5 types, including unleaded 63,0 70,0and diesel. Oil,5weather and ozone-resistant CSM rubber ensures long service 76,0 82,4 5 life and colour stability. Fits standard, reusable petrol pump connectors. 102,0 108,8 5 Please contact Codan for further information. 110,0 117,2 5
Product code
1005038000
127,0
134,2
5
15 Type nr. 3421 440 700 Application: Petrol / Diesel / Pumps 15 Standard Length: 50050 metres 790 Working Temperature: -30°C 960 to 80°C 15 630 Inside: NBR 15 Colour: Black 750 1.450 Reinforcement: PVA 15 1.000 1.580 Outside: CSM 15 Colour: Red 1.120 1.730 15 Standards: - 1.250 2.000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de
264,0 Outs i de
5 ng Worki
15 t Burs
2.500 Bend Ra di us
5.680 Wei ght
1005254000 Product
di a . (mm)
di a . (mm)
Pres s ure BAR
Pres s ure BAR
(mm)
(g/m)
80
100
441
15,0
25,0
20
1005045000 1005051000 1005063000 1005076000 1005102000 1005110000 1005127000
code
3421150000
15,9 25,9 20 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
80 110 458 3421159000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
19,1
31,1
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 80 125 664 3421191000
25,4
38,4
20
80
with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
150
913
3421254000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
PETROL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3423 Petrol Hose
Ins i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
31,4
5
15
250
420
1005025000
32,0 Codan 342338,4 --
5
15
300
520
1005032000
15
380
610
25,0
Outs i de di a . (mm)
38,0 44,4 5 Green, 45,0 flexible hose 51,4 with fabric reinforcement 5 and conducting inner rubber coating. 51,0 For use on petrol57,4 pumps for all fuel5 types, including unleaded 63,0 70,0and diesel. Oil,5weather and ozone-resistant CSM rubber ensures long service 76,0 82,4 5 life and colour stability. Fits standard, reusable petrol pump connectors. 102,0 108,8 5 Please contact Codan for further information. 110,0 117,2 5
Product code
1005038000
127,0
134,2
5
15 Type nr. 3423 440 700 Application: Petrol / Diesel / Pumps 15 Standard Length: 50050 metres 790 Working Temperature: -30°C 960 to 80°C 15 630 Inside: NBR 15 Colour: Black 750 1.450 Reinforcement: PVA 15 1.000 1.580 Outside: CSM 15 Colour: Green1.120 1.730 15 Standards: - 1.250 2.000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de
264,0 Outs i de
5 ng Worki
15 t Burs
2.500 Bend Ra di us
5.680 Wei ght
1005254000 Product
di a . (mm)
di a . (mm)
Pres s ure BAR
Pres s ure BAR
(mm)
(g/m)
80
100
441
15,0
25,0
20
1005045000 1005051000 1005063000 1005076000 1005102000 1005110000 1005127000
code
3423150000
15,9 25,9 20 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
80 110 458 3423159000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
19,1
31,1
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 80 125 664 3423191000
25,4
38,1
20
80
with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
150
913
3423254000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
PETROL HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 3424 Petrol Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
Codan 3424 - -
38,0 44,4 5 Blue, flexible hose with fabric reinforcement and 45,0 51,4 5 conducting inner rubber coating. 51,0 For use on petrol57,4 pumps for all fuel5 types, including unleaded 63,0 70,0and diesel. Oil,5weather and ozone-resistant CSM rubber ensures long service 76,0 82,4 5 life and colour stability. Fits standard, reusable petrol 102,0 pump connectors. 108,8 5 Please contact Codan for further information. 110,0 117,2 5 127,0
134,2
5
380 610 Type nr. 3424 15 440 700 Application: Petrol / Diesel / Pumps 15 Standard Length: 50050 metres 790 -30°C 960 to 80°C 15 Working Temperature: 630 Inside: NBR 15 Colour: Black 750 1.450 PVA 15 Reinforcement: 1.000 1.580 Outside: CSM 15 1.120 1.730 Colour: Blue 15 Standards: - 1.250 2.000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
80
100
441
3424150000
15,0
25,0
20
15
1005038000 1005045000 1005051000 1005063000 1005076000 1005102000 1005110000 1005127000
code
25,4 20with all the information you need. This hose 15,9 specification sheet has been prepared with great care in order to provide you
80 458 will affect3424159000 of vulcanised Rubber Products). The110 individual conditions of an application the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
19,1
31,1
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 80 125 664 3424191000 with incorrect media or use in environments outside the hose specification.
25,4
38,4
20
80
Please contact Codan Rubber for individual product manufacturing tolerances.
150
913
3424254000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
POWERSTEERING HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
4411
4426
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
POWERSTEERING HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 4411 Powersteering Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
15
500
790
1005051000
Codan 441157,4 - SAE J 188/189 51,0 5 63,0 High pressure 70,0 power steering5 hose with Black wrapped 76,0 cover and 82,42 layers of braided 5 reinforcement. Low volume expansion, low noise 102,0 108,8 5 transmission and high flexibility. Used in the automotive section both in the OEM 110,0 117,2 5 and the Aftermarket. Used for the high pressure side of 127,0 134,2 5 the powersteering system. For the low pressure 152,0 159,2 side please see 5 hose type 4426. 203,0 211,4 5 254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
9,5
19,7
15 Type nr. 4411 630 960 1005063000 15 Application: Power 750 Steering 1.450 1005076000 Standard Length: 40 metres 15 Working Temperature: 1.000 -20°C1.580 to 125°C1005102000 Inside: NBR 15 1.120 1.730 1005110000 Colour: Black 15 Reinforcement: 1.250 2.000 1005127000 PA 66 15 Outside: CM 1.500 2.380 1005152000 Colour: Black 15 2.000 3.750 1005203000 Standards: SAE J 188/189 15 2.500 5.680 1005254000
0
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
500
308
75
4411095000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
POWERSTEERING HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, Codan 4426 Powersteering Hose even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de 4426 Outs de Codan - iSAE di a . (mm) di a . (mm)
Worki ng J 188/189
Pres s ure BAR
Burs t Pres s ure BAR
Black 25,0 Low pressure 31,4power steering5hose with smooth cover. Low volume expansion, low noise 32,0 38,4 5 transmission and high flexibility. Used in the automotive section 38,0 44,4both in the OEM 5 and the Aftermarket. Used for the low pressure side of the 45,0 51,4 For the high5pressure side powersteering system. please see hose type 4411. 51,0 57,4 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
OIL
130
PETROL
148
POWERSTEERING
164
63,0
70,0
5
PVC
167
76,0
82,4
5
15 Type nr. 4426 250 420 1005025000 Application: Powersteering Hose 15 Standard Length: 30050 metres 520 1005032000 -40°C 610 to 135°C1005038000 15 Working Temperature: 380 Inside: NBR 15 Colour: Black 440 700 1005045000 Reinforcement: PET 15 500 790 1005051000 Outside: CPE 15 Colour: Black 630 960 1005063000 J 188/189 1.450 15 Standards: SAE750 1005076000
STEAM
179
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
MATERIAL HANDLING 120
WELDING & GAS INDEX
182
Ins127,0 i de di a . (mm) 152,0
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s5ure BAR
Burs15 t Pres s ure BAR 15
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght 1005127000 Product (g/m) 1005152000 code 2.380
203,0 5,6
211,4 11,8
5 17
15 70
2.000 50
3.750 113
1005203000 4426006
254,0 7,6
264,0 11,4
5 17
15 70
2.500 60
5.680 156
1005254000 4426008
9,5
16,5
17
70
65
190
4426095
10,0
18,0
17
70
72
234
4426010
11,8
19,8
17
70
96
264
4426012
12,8
19,8
17
70
102
236
4426013
15,9
23,0
17
70
127
282
4426016
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
PVC HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
2000
2005
2010
2011
2033
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
2042
2052
2057
INDEX
2111
2151
2152
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
PVC HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely Codan 2000 PVCspace-saving. Hose Flexible,
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de Outs i de Codan 2000 -di a . (mm) di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Blue suction hose. Ideal5 for use as 25,0corrugated31,4 vacuum-cleaner hose and extraction hose for 32,0 equipment, 38,4etc. 5 welding Vacuum: 38,0 60%. 44,4 5 Note! 76.0 mm hose supplied in 20 m rolls. 45,0 contact Codan 51,4 for further information. 5 Please 51,0 57,4 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
76,0
82,4
5
15 Type nr. 2000 250 420 Application: Industrial Vacuum, PVC 15 Standard Length: 30020 metres 520 -40°C 610 to 60°C 15 Working Temperature: 380 Inside: EVA 15 Colour: Blue 440 700 None 15 Reinforcement: 500 790 Outside: 15 630 960 Colour: 15 Standards: - 750 1.450
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 25,0 254,0 32,0
211,4 33,4 264,0 39,8
5 0 5 0
15 0 15 0
2.000 60 2.500 80
3.750 210 5.680 270
1005203000 2000025000 1005254000 2000032000
63,0
70,0
5
1005025000 1005032000 1005038000 1005045000 1005051000 1005063000 1005076000
code 1005152000
38,0
46,1
0
0
100
320
2000038000
45,0
52,5
0
0
125
380
2000045000
50,0
59,8
0
0
150
440
2000051000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
64,0
72,0
0
76,0
88,0
0
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
0
250
540
2000064000
0
315
641
2000076000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
PVC HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2005 PVC Hose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
25,0
31,4
5
15
250
420
1005025000
COOLANT
77
32,0
38,4
5
15
300
520
1005032000
FOOD
87
380
610
1005038000
GAS
99
440
700
1005045000
HYDRAULIC
110
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
38,0 5 15 Ohm Codan 200544,4 - Electrical Resistivity <10^6 45,0 51,4 5 Black corrugated EVA suction hose. 51,0 Conductive 57,4 5 Ideal for use as vacuum-cleaner hose and 63,0 5 extraction hose 70,0 for welding equipment. Electrical Resistivity <10^6 Ohm 76,0 82,4 5 Vacuum: 60%. 102,0 108,8 5 Please contact Codan for further information. 110,0 117,2 5
15
Bend Ra di us (mm)
Wei ght (g/m)
Product code
OIL
130
PETROL
148
POWERSTEERING
164
127,0
134,2
5
PVC
167
152,0
159,2
5
15 Type nr. 2005 500 790 1005051000 Application: PVC Hose 15 Standard Length: 63020 metres 960 1005063000 Working Temperature: -25°C to 60°C 15 750 1.450 1005076000 Inside: EVA 15 Colour: Black 1.000 1.580 1005102000 Reinforcement: None 15 1.120 1.730 1005110000 Outside: 15 Colour: 1.250 2.000 1005127000 <10^61005152000 Ohm 15 Standards: Electrical 1.500 Resistivity 2.380
STEAM
179
203,0
211,4
5
15
2.000
3.750
1005203000
WELDING & GAS
182
254,0
264,0
5
15
2.500
5.680
1005254000
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
MATERIAL HANDLING 120
INDEX
32,0
39,8
0
38,0
46,1
0
50,0
59,8
0
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Product code
0
80
270
2005032000
0
100
320
2005038000
0
150
440
2005050000
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
PVC HOSES Codan 1005 Black, reinforced, layflat water hose. Easy to
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de Outs i de Codan 2010 -di a . (mm) di a . (mm)
Worki ng Pres s ure BAR
82,4
5
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 25,0 254,0 32,0
211,4 33,4 264,0 39,8
5 0 5 0
15 0 15 0
2.000 60 2.500 80
3.750 210 5.680 270
1005203000 2010025000 1005254000 2010032000
51,0
57,4
5
POWERSTEERING
164
63,0
70,0
5
PVC
167
INDEX
Product code
76,0
148
182
Wei ght (g/m)
102,0
PETROL
WELDING & GAS
Bend Ra di us (mm)
15 Type nr. 2010 250 420 Application: Industrial Vacuum, PVC 15 Standard Length: 30020 metres 520 -40°C 610 to 60°C 15 Working Temperature: 380 Inside: EVA 15 440 700 Colour: Yellow None 15 Reinforcement: 500 790 Outside: 15 630 960 Colour: 15 Standards: - 750 1.450
130
179
Burs t Pres s ure BAR
Yellow EVA suction hose. 25,0 corrugated 31,4 5 Ideal for use as vacuum-cleaner hose and extraction hose for 32,0 equipment. 38,4 5 welding Vacuum: 38,0 60%. 44,4 5 Please contact Codan for further information. 45,0 51,4 5
OIL
STEAM
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely Codan 2010 PVCspace-saving. Hose Flexible, even when used at low temperatures. Often used
1005025000 1005032000 1005038000 1005045000 1005051000 1005063000 1005076000
code 1005152000
38,0
46,1
0
0
100
320
2010038000
45,0
52,5
0
0
125
380
2010045000
50,0
59,8
0
0
150
440
2010051000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
64,0
72,0
0
76,0
88,0
0
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
0
250
540
2010064000
0
315
641
2010076000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
PVC HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Codan 2011 PVC Hose
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally 2011 installed- using hose clamps, Bauer or Codan BGA/FDA Stortz fittings, or similar. Please contact Codan for further information. Transparent, cadmium-free, non-reinforced PVC hose for air, water, certain chemicals, acids, oils, etc. under low pressure. Transparent design allows effective flow control. Normally installed using hose clamps. Please contact Codan for further information.
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
25,0
31,4
5
STEAM
179
32,0
38,4
5
WELDING & GAS
182
INDEX
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Type nr. 2011 Colour: BlackPVC Hose Application: Standards: Standard Length: 50 metres Working Temperature: -20°C to 55°C Inside: PVC Colour: Transparent Reinforcement: None Burs t Bend Ra di us Wei ght Product Outside: Pres s ure BAR (mm) (g/m) code Colour: 15 Standards: BGA/FDA 250 420 1005025000 15
520
1005032000
38,0
44,4
5
380
610
1005038000
45,0 Ins i de
51,4i de Outs
5 ng Worki
15 t Burs
440 Bend Ra di us
700ght Wei
1005045000 Product
di a . (mm)
di a . (mm)
Pres s ure BAR
Pres s ure BAR
(mm) 500
(g/m)
code 1005051000
51,0
57,4
5
15
300
15
790
3,0 63,0
6,0 70,0
0 5
0 15
50 630
15 960
2011003000 1005063000
4,0 76,0
6,0 82,4
0 5
0 15
50 750
18 1.450
2011004000 1005076000
5,0 102,0
8,0 108,8
0 5
0 15
65 1.000
26 1.580
2011005000 1005102000
6,0 110,0
9,0 117,2
0 5
0 15
70 1.120
45 1.730
2011006000 1005110000
8,0 127,0
11,0 134,2
0 5
0 15
85 1.250
57 2.000
2011008000 1005127000
10,0 152,0
16,0 159,2
0 5
0 15
130 1.500
108 2.380
2011010000 1005152000
12,0 203,0
15,0 211,4
0 5
0 15
120 2.000
138 3.750
2011012000 1005203000
16,0 254,0
22,0 264,0
0 5
0 15
175 2.500
181 5.680
2011016000 1005254000
19,0
25,0
0
0
200
231
2011019000
25,0
31,0
0
0
250
321
2011025000
32,0
38,0
0
0
300
411
2011032000
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
38,0
47,0
0
50,0
62,0
0
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
0
375
501
2011038000
0
495
681
2011050000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
06/01/2015 The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
PVC HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2033 PVC Hose Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
Product code
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
51,0
57,4
5
15
500
790
Codan 2033 - -
Industrial ventilation 63,0 70,0 of air heavy 5with abrasive particles or very reactive substances. Suction, 76,0 82,4 5 carrying or impulsion of hot gas and fumes, for 102,0 oils, shavings, 108,8 dust, sawdust, 5 fibres etc. example Nontoxic. 110,0 117,2 5 127,0
134,2
5
152,0
159,2
5
203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
46,4
0
50,0
57,0
0
1005051000 1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (mm) (g/m) code vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
40,0
15 Type nr. 2033 630 960 Application: Universal, PVC 15 750 1.450 Standard Length: 50 metres 15 Working Temperature: 1.000 -10°C1.580 to 60°C 15 Inside: PVC 1.120 1.730 Colour: Gray 15 Reinforcement: 1.250 PVC Spiral 2.000 Outside: 15 1.500 2.380 Colour: 15 Standards: - 2.000 3.750 15 2.500 5.680
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
0
40
280
2033040000
0
50
450
203305000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
PVC HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
Codan 2042 PVC Hose
Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
31,4
Product code
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
Codan 2042 - ISO 3994
OIL
130
102,0
108,8
5
PETROL
148
110,0
117,2
5
POWERSTEERING
164
127,0
134,2
5
PVC
167
152,0
159,2
5
440 700 Type nr. 2042 15 500 790 Application: Universal, PVC 15 Standard Length: 630- metres 960 -10°C1.450 to 55°C 15 Working Temperature: 750 Inside: PVC 15 Colour: Green1.000 1.580 Rigid Helix 1.730 15 Reinforcement: 1.120 Outside: 15 1.250 2.000 Colour: 15 Standards: ISO1.500 2.380 3994
203,0
211,4
5
15
2.000
3.750
1005203000
254,0
264,0
5
15
2.500
5.680
1005254000
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
MATERIAL HANDLING 120
STEAM
179
WELDING & GAS
182
INDEX
45,0 51,4 5 Mainly in agriculture for light suction 51,0 57,4 5 and conveying water with electropumps and 63,0 70,0 5 motorpumps. 76,0 82,4 5
20,0
26,2
0
32,0
38,6
0
40,0
47,2
0
15
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
1005045000 1005051000 1005063000 1005076000 1005102000 1005110000 1005127000 1005152000
Product code
0
100
300
2042020000
0
160
425
2042032000
0
200
575
2042038000
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 06/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
PVC HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Codan 2052 PVC Hose Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Codan 2052 - Flat hose reinforced with polyester yarn, medium pressure. Mainly for conveying water. Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
5
OIL
130
PETROL
148
32,0
38,4
5
POWERSTEERING
164
38,0
44,4
5
PVC
167
45,0
51,4
5
STEAM
179
WELDING & GAS INDEX
182
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Type nr. 2052 Application: Layflat, PVC Length: metres BursStandard t Bend Ra- di us Wei ght Working -20°C (g/m) to 50°C Pres s ure BAR Temperature: (mm) Inside: PVC 15 Colour: Black 250 420 Reinforcement: Polyester 15 300 520 Outside: PVC 15 Colour: Blue 380 610 15 Standards: - 440 700
Product code
1005025000 1005032000 1005038000 1005045000
51,0
57,4
5
15
500
790
1005051000
63,0
70,0
5
15
630
960
1005063000
76,0 Ins i de di a . (mm)
108,8
5 ng Worki Pres s ure BAR 5
15 t Burs Pres s ure BAR 15
750 Bend Ra di us (mm) 1.000
1.450 Wei ght (g/m)
1005076000 Product
102,0
82,4i de Outs di a . (mm)
1.580
code 1005102000
25,0 110,0
29,0 117,2
7 5
15
0 1.120
0 1.730
2052025000 1005110000
32,0 127,0
36,0 134,2
7 5
15
0 1.250
200 2.000
2052032000 1005127000
38,0 152,0
41,0 159,2
5
15
0 1.500
230 2.380
2052038000 1005152000
50,0 203,0
54,0 211,4
0 5
15
0 2.000
333 3.750
2052050000 1005203000
63,0 254,0
69,0 264,0
4 5
15
0 2.500
430 5.680
2052063000 1005254000
76,0
82,0
4
10
0
570
2052076000
102,0
108,0
4
10
0
865
2052102000
125,0
133,0
3
10 0 1.080 2052125000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
152,0
160,0
3
10 2052152000 complied with. Codan Rubber’s warranty0 is void in the event of misuse 1.482 such as excessive bending, crushing, stretching, use
200,0
211,0
3
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
8
0
2.020
2052200000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
PVC HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2057 PVC Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
5
15
500
790
1005051000
Codan 205757,4 -51,0
63,0 70,0resistance to oils, 5 fuels and Air hose with good greases. 76,0 82,4 5 e.g. Cleaninghose in the dry ice industry. 102,0 5 outer Shore Tolorances acc.108,8 DIN16940. Inner and A110,0 85. Tensile strength 37 MPa, Elongation 550%, 117,2 5 Abrasion Loss 25 mm3. 127,0 134,2 5 152,0
159,2
5
203,0
211,4
5
254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
26,0
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (g/m)will affect the life timecode vulcanised Rubber Products). The(mm) individual conditions of an application of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
19,0
15 Type nr. 2057 630 960 PVC 1.450 15 Application: Universal, 750 Standard Length: 50 metres 15 Working Temperature: 1.000 -40°C1.580 to 80°C Inside: TPU 15 1.120 1.730 Colour: Clear 15 Reinforcement: 1.250 Polyester 2.000 15 Outside: TPU 1.500 2.380 Colour: Clear 15 2.000 3.750 Standards: 15 2.500 5.680
15
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
45
50
0
2057019000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
PVC HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2111 PVC Hose Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2111 - BGA/FDA
Transparent, cadmium-free, reinforced PVC hose Type nr. 2111 for air, water, certain chemicals, acids, oils, etc. Application: PVC Hose Ins i depressure. Outs i de BursStandard t Bend Ra50 di us under Polyester fabricWorki linerng provides Length: metres Wei ght di a . (mm) a . (mm) Pres s ure BAR BAR Temperature: (mm) stable workingdiand bursting pressures and greatPres s ure Working -20°C (g/m) to 55°C flexibility. Transparent design allows effective Inside: PVC 25,0control. 31,4 5 15 Colour: Transparent 250 420 flow Normally installed Polyester 32,0 38,4using hose clamps. 5 15 Reinforcement: 300 520 Please contact Codan for further information. Outside: PVC 38,0 44,4 5 15 380 610 Colour: Transparent 45,0 51,4 5 15 Standards: BGA/FDA 440 700
Product code
1005025000 1005032000 1005038000 1005045000
51,0
57,4
5
15
500
790
1005051000
63,0
70,0
5
15
630
960
1005063000
76,0 Ins i de di102,0 a . (mm)
82,4i de Outs di108,8 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
750 Bend Ra di us (mm) 1.000
1.450 Wei ght (g/m) 1.580
1005076000 Product
110,0 6,0 127,0 8,0
117,2 12,0 134,2 14,0
5 15 5 15
15 60 15 60
1.120 40 1.250 65
1.730 82 2.000 113
1005110000 2111006000 1005127000 2111008000
152,0 10,0 203,0 12,5
159,2 16,0 211,4 18,5
5 10 5 10
15 40 15 40
1.500 80 2.000 100
2.380 130 3.750 166
1005152000 2111010000 1005203000 2111013000
254,0 16,0
264,0 23,0
5 8
15 32
2.500 130
5.680 202
1005254000 2111016000
code 1005102000
19,0
27,0
7
28
150
285
2111019000
25,0
33,0
6
24
200
508
2111025000
32,0
42,0
6
22 255 413 will affect2111032000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
38,0
48,0
4
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 16 300 508 2111038000 with incorrect media or use in environments outside the hose specification.
50,0
60,0
3
12
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
400
698
2111050000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
PVC HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2151 PVC Hose Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
Codan 215157,4 - 2002/72/EC, CL. ABC 51,0 5 63,0cadmium-free, 70,0 reinforced PVC5 hose for air, Blue, water, certain chemicals. Wine, fruitjuice, 76,0 82,4 5 limonade and mineralwater under pressure. 102,0 108,8 5 Polyester fabric liner provides stable working and bursting pressures 110,0 117,2 and great flexibility. 5 Transparent design allows effective flow control. 127,0 5 Tolorances acc.134,2 to DIN 16940. Normally installed using 152,0hose clamps. 159,2Please contact5Codan for further information. 203,0 211,4 5 254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
15
440
700
1005045000
15
500
790
1005051000
15 Type nr. 2151 630 960 Application: Universal, PVC 15 750 1.450 Standard Length: 50 metres 15 Working Temperature: 1.000 -20°C1.580 to 65°C Inside: PVC 15 1.120 1.730 Colour: Transparent 15 Reinforcement: 1.250 Polyester 2.000 15 Outside: PVC 1.500 2.380 Colour: Blue 15 Standards: 2002/72/EC, 2.000 3.750 CL. ABC 15 2.500 5.680
1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (mm) (g/m) code vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
10,0
16,0
10
40 40outside the hose specification. 0 with incorrect media or use in environments
2151010000
13,0
19,0
10
40
2151013000
Please contact Codan Rubber for individual product manufacturing tolerances.
70
0
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
PVC HOSES
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2152 PVC Hose Ins i de di a . (mm)
25,0
Outs i de di a . (mm)
31,4
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
5
15
250
420
Product code
1005025000
32,0
38,4
5
15
300
520
1005032000
38,0
44,4
5
15
380
610
1005038000
45,0
51,4
5
15
440
700
1005045000
51,0
57,4
5
15
500
790
Codan 2152 - 2002/72/EC, CL. ABC Red, 63,0cadmium-free, 70,0reinforced PVC5hose for air, water, certain chemicals. Wine, fruitjuice, 76,0 82,4 5 limonade and mineralwater under pressure. 102,0 fabric108,8 5 working Polyester liner provides stable and bursting pressures 110,0 117,2 and great flexibility. 5 Transparent design allows effective flow control. 127,0 5 Tolorances acc.134,2 to DIN 16940. Normally installed using hose clamps. Please contact Codan for 152,0 159,2 5 further information. 203,0 211,4 5 254,0
264,0
5
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
15 Type nr. 2152 630 960 Application: Universal, PVC 15 750 1.450 Standard Length: 50 metres 15 Working Temperature: 1.000 -20°C1.580 to 65°C 15 Inside: PVC 1.120 1.730 Colour: Transparent 15 Reinforcement: 1.250 Polyester 2.000 Outside: PVC 15 1.500 2.380 Colour: Red 15 Standards: 2002/72/EC, 2.000 3.750 CL. ABC 15 2.500 5.680
1005051000 1005063000 1005076000 1005102000 1005110000 1005127000 1005152000 1005203000 1005254000
Burs t Bend Ra di us Wei ght Product Pres sofure BAR (mm) (g/m) code vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use
10,0
16,0
10
40 40outside the hose specification. 0 with incorrect media or use in environments
13,0
19,0
10
40
Please contact Codan Rubber for individual product manufacturing tolerances.
70
0
2152010000
2152013000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
STEAM HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
1158
1518
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
STEAM HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS INDEX
182
Codan 1005Steam Codan 1158 Hose Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1158 - BS 5342 Type 2 A Red, spiralized steam hose Ins iheavy-duty, de Outs i de Worki ng BursType t nr. 1158 Bend Ra di us Wei ght Product manufactured to BS 5342 Type 2 Class A. Application: Saturated and Water code di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR (mm) Steam (g/m) For use in industry for saturated steam and hot Standard Length: 30 metres water -20°C 420 to 235°C1005025000 25,0 in laundries, 31,4dairies, slaughterhouses, 5 15 Working Temperature: 250 power stations, etc. Also available in black. Inside: EPDM 32,0 15 Colour: Black 300 520 1005032000 For steam, must38,4 be installed using5special connectors. Crimped-on fittings are Reinforcement: Helix Wire 38,0 44,4 5 15 380 610 1005038000 recommended for pressurised steam. Outside: EPDM 45,0 51,4 5 15 440 700 1005045000 Please contact Codan for further information. Colour: Red 51,0 57,4 5 15 Standards: BS 5342 500 Type 2 A 790 1005051000 63,0
70,0
5
15
630
960
1005063000
76,0
82,4
5
15
750
1.450
1005076000
102,0 Ins i de di110,0 a . (mm)
108,8 Outs i de di117,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.000 Bend Ra di us (mm) 1.120
1.580 Wei ght (g/m) 1.730
1005102000 Product
127,0 13,0
134,2 26,0
5 17
15 170
1.250 190
2.000 680
1005127000 1158013000
152,0 16,0
159,2 30,0
5 17
15 170
1.500 210
2.380 780
1005152000 1158016000
203,0 19,0
211,4 33,0
5 17
15 170
2.000 230
3.750 870
1005203000 1158019000
254,0 25,0
264,0 41,0
5 17
15 170
2.500 290
5.680 1.320
1005254000 1158025000
32,0
48,0
17
170
385
1.560
1158032000
38,0
55,0
17
170
505
1.840
1158038000
code 1005110000
61,0 170 575 2.170will affect1158044000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product. This hose 44,0 specification sheet has been prepared with great care in order to provide 17 you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
51,0
68,0
17
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 170 620 2.420 1158051000 with incorrect media or use in environments outside the hose specification.
63,0
79,0
17
170
Please contact Codan Rubber for individual product manufacturing tolerances.
750
2.690
1158063000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
STEAM HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 1518 Steam Hose Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 1518 - -
White, wrapped hose designed for low-pressure Type nr. 1518 steam and hot water. Application: Saturated Steam and Water Insindustrial i de Outs i de in dairies, Worki ng BursStandard t Bend Ra40 di us Product For cleaning Length: metres Wei ght di a . (mm) di a .laundries, (mm) Pres s ure BAR Pres s ure BAR Temperature: (mm) code slaughterhouses, etc. Working -30°C (g/m) to 170°C When used for steam, it is recommended that Inside: EPDM 25,0 31,4 open. 5 15 Colour: White 250 420 1005025000 one hose end remains Please Polyester 32,0 contact Codan 38,4 for further information. 5 15 Reinforcement: 300 520 1005032000 Outside: EPDM 38,0 44,4 5 15 380 610 1005038000 Colour: White 45,0 51,4 5 15 Standards: - 440 700 1005045000 51,0
57,4
5
15
500
790
1005051000
63,0
70,0
5
15
630
960
1005063000
76,0 Ins i de di102,0 a . (mm)
82,4i de Outs di108,8 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
750 Bend Ra di us (mm) 1.000
1.450 Wei ght (g/m) 1.580
1005076000 Product
110,0 13,0 127,0 16,0
117,2 25,0 134,2 28,0
5 7 5 7
15 70 15 70
1.120 130 1.250 160
1.730 410 2.000 470
1005110000 1518013000 1005127000 1518016000
152,0 19,0 203,0 25,0
159,2 32,0 211,4 38,0
5 7 5 7
15 70 15 70
1.500 190 2.000 250
2.380 600 3.750 740
1005152000 1518019000 1005203000 1518025000
254,0 32,0
264,0 47,0
5 7
15 70
2.500 320
5.680 1.007
1005254000 1518032000
code 1005102000
38,0
54,0
7
70
380
1.340
1518038000
45,0
60,0
7
70
450
1.460
1518045000
51,0
66,2
7
70 510 1.590will affect1518051000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
63,0
81,0
7
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 70 630 2.425 1518063000 with incorrect media or use in environments outside the hose specification.
76,0
94,8
7
70
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
760
3.100
1518076000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
WELDING & GAS HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
2801
2802
2803
2806
2808
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
2812
INDEX
2813
2820
2823
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
WELDING & GAS HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2801 Welding & Gas Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
25,0 5 Codan 280131,4 - EN 559: 2003
15
250
420
32,0 38,4 5 Lightweight, flexible, smooth, red hose for 38,0 44,4 5 acetylene, to EN559. For use with industrial 45,0 51,4 5 together autogenic welding equipment, usually with blue oxygen hose. 51,0 57,4 5 Also ideal for natural gas and air. 63,0 70,0 5 Please contact Codan for further information.
Product code
1005025000
OIL
130
PETROL
148
76,0
82,4
5
POWERSTEERING
164
102,0
108,8
5
PVC
167
110,0
117,2
5
300 520 Type nr. 2801 380 610 Application: Acetylene 15 Standard Length: 44050 metres 700 Working Temperature: -30°C 790 to 80°C 15 500 Inside: EPDM 15 Colour: Black 630 960 Reinforcement: Ester 15 750 1.450 Outside: EPDM 15 Colour: Red 1.000 1.580 559: 2003 15 Standards: EN1.120 1.730
STEAM
179
127,0
134,2
5
15
1.250
2.000
1005127000
WELDING & GAS
182
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de
211,4 Outs i de
5 ng Worki
15 t Burs
2.000 Bend Ra di us
3.750 Wei ght
1005203000 Product
di254,0 a . (mm)
di264,0 a . (mm)
Pres s 5 ure BAR
Pres s15 ure BAR
(mm) 2.500
(g/m) 5.680
code 1005254000
MATERIAL HANDLING 120
INDEX
15
1005032000
15
1005038000 1005045000 1005051000 1005063000 1005076000 1005102000 1005110000
6,3
13,3
20
60
63
146
2801006000
8,0
14,6
20
60
80
172
2801008000
10,0
17,0
20
60 100 203 2801010000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
12,5
19,4
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 125 257 2801013000
20,0
27,2
20
Please contact Codan Rubber for individual product manufacturing tolerances. 60 200 399
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification.
2801019000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
WELDING & GAS HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2802 Welding & Gas Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
25,0 5 15 Codan 280231,4 - EN ISO 3821 / EN 559: 2003 32,0 38,4 5 Lightweight, flexible, smooth, blue 38,0 44,4 5hose for oxygen, to EN559. For use with industrial 45,0 51,4 5 together autogenic welding equipment, usually with hose. 51,0red acetylene 57,4 5 Also ideal for natural gas and air. 63,0 contact Codan 70,0 for further information. 5 Please 76,0 82,4 5
15
Bend Ra di us (mm)
Wei ght (g/m)
Product code
250
420
1005025000
300
520
1005032000
OIL
130
PETROL
148
POWERSTEERING
164
102,0
108,8
5
PVC
167
110,0
117,2
5
15 Type nr. 2802 380 610 1005038000 Application: Oxygen 15 Standard Length: 44050 metres 700 1005045000 -30°C 790 to 80°C 1005051000 15 Working Temperature: 500 Inside: SBR/EPDM 15 Colour: Black 630 960 1005063000 Reinforcement: PVA 15 750 1.450 1005076000 Outside: EPDM 15 Colour: Blue 1.000 1.580 1005102000 ISO 3821 / EN 1.730 559: 20031005110000 15 Standards: EN1.120
STEAM
179
127,0
134,2
5
15
1.250
2.000
1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de di254,0 a . (mm)
211,4 Outs i de di264,0 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
2.000 Bend Ra di us (mm) 2.500
3.750 Wei ght (g/m) 5.680
1005203000 Product
MATERIAL HANDLING 120
WELDING & GAS INDEX
182
code 1005254000
6,3
13,3
20
60
63
146
2802006000
8,0
14,6
20
60
80
172
2802008000
10,0
17,0
20
60 100 203 2802010000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
12,5
19,4
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 125 257 2802013000 with incorrect media or use in environments outside the hose specification.
20,0
27,2
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
200
399
2802019000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
WELDING & GAS HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2803 & Gas Hose Codan 1005Welding Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de 2803 Outs de Codan - iEN di a . (mm) di a . (mm)
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Worki ng t ISOPres 3821/EN 559PresBurs s ure BAR s ure BAR
Lightweight, flexible and 25,0 31,4 twin hose for oxygen 5 acetylene, designed for use with mobile and 32,0 38,4 welding equipment. 5 stationary autogenic Dividing groove allows easy separation and 38,0 44,4 5 simple fitting to gas cylinder or welding gun. 45,0ideal for other 51,4purposes, e.g. air 5 inlet/outlet Also on51,0 sandblasting57,4 equipment. 5 Normally installed using brass fittings, either 63,0hose clamps 70,0 5 with or crimp-on fittings. Please contact Codan for further information. 76,0 82,4 5
Bend Ra di us (mm)
Wei ght (g/m)
15 Type nr. 2803 250 420 Application: Oxygen / Acetylene 15 Standard Length: 30050 metres 520 -30°C 610 to 80°C 15 Working Temperature: 380 Inside: Ace: EPDM Oxy: SBR/EPDM 15 Colour: Black 440 700
Product code
1005025000 1005032000 1005038000 1005045000
Ester 15 Reinforcement: 500 790 Outside: EPDM 15 Colour: Red/Blue 630 960 Standards: EN ISO 3821/EN 559 15 750 1.450
1005076000
1005051000 1005063000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0 Ins i de di152,0 a . (mm)
134,2 Outs i de di159,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.250 Bend Ra di us (mm) 1.500
2.000 Wei ght (g/m) 2.380
1005127000 Product
203,0 4,0
211,4 12,0
5 20
15 60
2.000 45
3.750 253
1005203000 2803404000
254,0 5,0
264,0 11,0
5 20
15 60
2.500 50
5.680 253
1005254000 2803505000
6,3
13,0
20
60
63
301
2803606000
6,3
15,0
20
60
100
382
2803608000
code 1005152000
6,3
16,0
20
60 100 390 2803609000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
8,0
15,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 80 355 2803808000 with incorrect media or use in environments outside the hose specification.
10,0
17,0
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
100
419
2803010000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
WELDING & GAS HOSES Codan 1005 -
Codan Welding & Gas Black,2806 reinforced, layflat water hose. Easy toHose
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
Codan 2806 - EN 559: 2003
GAS
99
Ins i de Outs i de Worki ng Burs t Bend Ra di us di a . (mm) a . (mm)hose for Pres s ure BAR BARnr. 2806 (mm) Black, flexiblediwelding argon. For use inPres s ure Type
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
industrial argon-welding applications. Specially 25,0 31,4 moisture from 5 permeating developed to prevent into the hose from the outside. A very 32,0 38,4 5 strong, non-porous weld is thus achieved. 38,0 contact Codan 44,4 for further information. 5 Please 45,0 51,4 5
Wei ght (g/m)
Application: Argon 15 Standard Length: 25050 metres 420
Product code
1005025000
63,0
70,0
5
-25°C 520 to 80°C 15 Working Temperature: 300 Inside: EPDM 15 Colour: Black 380 610 Polyester 15 Reinforcement: 440 700 Outside: SBR 15 500 790 Colour: Black 15 Standards: EN 559: 630 2003 960
76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de di127,0 a . (mm)
117,2 Outs i de di134,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.120 Bend Ra di us (mm) 1.250
1.730 Wei ght (g/m) 2.000
1005110000 Product
152,0 4,0 203,0 5,0
159,2 10,0 211,4 11,0
5 20 5 20
15 60 15 60
1.500 0 2.000 0
2.380 0 3.750 0
1005152000 2806004000 1005203000 2806005000
254,0 6,3
264,0 13,3
5 20
15 60
2.500 0
5.680 0
1005254000 2806006000
8,0
15,0
20
60
0
0
2806008000
10,0
17,0
20
60
0
0
2806010000
51,0
57,4
5
1005032000 1005038000 1005045000 1005051000 1005063000
code 1005127000
12,5
22,5
20
60 0 conditions of an application 0 will affect2806013000 of vulcanised Rubber Products). The individual the life time of each product.
16,0
26,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 0 0 2806016000 with incorrect media or use in environments outside the hose specification.
19,1
29,0
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
0
0
2806019000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
WELDING & GAS HOSES Codan 1005 CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120
Black,2808 reinforced, layflat water hose. Easy toHose Codan Welding & Gas handle and extremely space-saving. Flexible,
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0 5 Codan 280831,4 - EN 559: 2003
15
250
420
1005025000
32,0 38,4 5 Flexible twin hose for propane/butane and 38,0 44,4 5 oxygen. Dividing groove allows easy separation. 45,0 51,4for industrial cutting 5 Specially designed and welding 51,0 tasks. 57,4 5 Normally installed using hose clamps or swaged 70,0 5 on63,0 fittings. Please contact Codan for further information. 76,0 82,4 5
15
300
520
1005032000
OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
102,0
108,8
5
WELDING & GAS
182
110,0
117,2
5
Type nr. 2808 380 610 1005038000 Application: Oxygen / LPG (Propane / Butane) 15 Standard Length: 44050 metres 700 1005045000 -25°C 790 to 80°C 1005051000 15 Working Temperature: 500 Inside: NBR 15 Colour: Black 630 960 1005063000 Reinforcement: PVA 15 750 1.450 1005076000 Outside: SBR 15 Colour: Blue/Orange 1.000 1.580 1005102000 Standards: EN 559: 2003 15 1.120 1.730 1005110000
127,0
134,2
5
15
1.250
2.000
1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0 Ins i de di254,0 a . (mm)
211,4 Outs i de di264,0 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
2.000 Bend Ra di us (mm) 2.500
3.750 Wei ght (g/m) 5.680
1005203000 Product
60
55
300
2808505000
60
60
350
2808606000
INDEX
5,0
11,0
20
6,3
12,0
20
15
code 1005254000
6,3 16,0 20 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
80 80 400 2808608000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
8,0
15,0
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 90 500 2808808000
10,0
17,0
20
Please contact Codan Rubber for individual product manufacturing tolerances. 60 120 760
with incorrect media or use in environments outside the hose specification.
2808909000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
WELDING & GAS HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2812 Welding & Gas Hose Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2812 - ISO 3821**
Lightweight, flexible, blue welding hose. The Type nr. 2812 ribbed surface allows the hose to be dragged Application: Oxygen easily floor Length: metres Wei ght Ins i deacross the Outs i de and prevents Workiitngbecoming BursStandard t Bend Ra50 di us Product dirty. Working -40°C (g/m) to 100°C di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR Temperature: (mm) code For transporting oxygen in autogenic welding Inside: EPDM 25,0 15 Colour: Black 250 420 1005025000 equipment used31,4 in industrial plant,5 shipyards, building sites, etc. As it is lightweight, the hose is Reinforcement: Polyester 32,0 38,4 5 15 300 520 1005032000 also ideal for compressed air. Also available in Outside: EPDM 38,0 5 15 Colour: Blue 380 610 1005038000 100 m lengths. 44,4 Normally installed 3821** 45,0 51,4using hose clamps 5 and 15 Standards: ISO440 700 1005045000 specially designed brass fittings. Note! Crimped57,4 5 15 500 790 1005051000 on51,0 fittings are recommended. Please contact Codan for further information. 63,0 70,0 5 15 630 960 1005063000 76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de di127,0 a . (mm)
117,2 Outs i de di134,2 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.120 Bend Ra di us (mm) 1.250
1.730 Wei ght (g/m) 2.000
1005110000 Product
152,0 5,0
159,2 11,4
5 20
15 60
1.500 50
2.380 110
1005152000 2812005000
203,0 6,3
211,4 12,9
5 20
15 60
2.000 63
3.750 140
1005203000 2812006000
254,0 8,0
264,0 14,8
5 20
15 60
2.500 80
5.680 165
1005254000 2812008000
9,5
16,5
20
60
100
210
2812010000
12,7
19,7
20
80
110
260
2812013000
code 1005127000
15,9 26,9 20 This hose specification sheet has been prepared with great care in order to provide you with all the information you need.
80 180 560 2812016000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
19,1
30,1
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 80 190 640 2812019000 with incorrect media or use in environments outside the hose specification.
25,4
36,4
20
80
Please contact Codan Rubber for individual product manufacturing tolerances.
210
795
2812025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 Air / Water Hose
WELDING & GAS HOSES CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2813 Welding & Gas Hose Codan 1005 -
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2813 - ISO 3821**
Lightweight, flexible, red welding hose. The Type nr. 2813 ribbed surface allows the hose to be dragged Application: Acetylene Ins i deacross the Outs i de and prevents Workiitngbecoming BursStandard t Bend Ra50 di us Product easily floor Length: metres Wei ght di a . (mm) di a . (mm) Pres s ure BAR Pres s ure BAR Temperature: (mm) code dirty. Working -40°C (g/m) to 100°C For transporting acetylene in autogenic welding Inside: EPDM 25,0 15 Colour: Black 250 420 1005025000 equipment used31,4 in industrial plant,5 shipyards, building As it is lightweight, Polyester 32,0 sites, etc. 38,4 5 the hose is 15 Reinforcement: 300 520 1005032000 also ideal for compressed air. Also available in Outside: EPDM 38,0 44,4 5 15 380 610 1005038000 100 m lengths. Colour: Red Normally installed 3821** 45,0 51,4using hose clamps 5 and 15 Standards: ISO440 700 1005045000 specially designed brass fittings. Note! Crimped51,0 57,4 5 15 500 790 1005051000 on fittings are recommended. 63,0 contact Codan 70,0 for further information. 5 15 630 960 1005063000 Please 76,0
82,4
5
15
750
1.450
1005076000
102,0
108,8
5
15
1.000
1.580
1005102000
110,0 Ins i de
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.120 Bend Ra di us (mm) 1.250
1.730 Wei ght (g/m) 2.000
1005110000 Product
di127,0 a . (mm)
117,2 Outs i de di134,2 a . (mm)
152,0 5,0 203,0 6,3
159,2 11,4 211,4 12,9
5 20 5 20
15 60 15 60
1.500 50 2.000 63
2.380 110 3.750 140
1005152000 2813005000 1005203000 2813006000
254,0 8,0
264,0 14,8
5 20
15 60
2.500 80
5.680 165
1005254000 2813008000
9,5
16,5
20
60
100
210
2813009000
160
260
2813013000
code 1005127000
12,7
19,7
20
80
15,9
26,9
20
80 180 560 will affect2813016000 of vulcanised Rubber Products). The individual conditions of an application the life time of each product.
19,1
30,1
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 80 190 640 2813019000 with incorrect media or use in environments outside the hose specification.
25,4
36,4
20
80
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
Please contact Codan Rubber for individual product manufacturing tolerances.
210
795
2813025000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
WELDING & GAS HOSES Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
Codan 2820 Welding & Gas Hose Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Codan 2820 - ISO 3821**
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Burs t Pres s ure BAR
25,0 31,4 5 Flexible twin hose for acetylene and 32,0 38,4 5 oxygen. Specially designed dividing groove allows easy 38,0 44,4 to gas cylinder 5 or welding separation for fitting gun. 45,0 51,4 5 For use throughout industry for transporting 51,0 57,4 in mobile and 5 stationary acetylene and oxygen autogenic welding equipment. 63,0 70,0 5 Normally installed using hose clamps and 76,0 82,4 5 specially designed brass fittings. Please Codan for further information. 102,0 contact 108,8 5
Bend Ra di us (mm)
Wei ght (g/m)
Product code
15
250 420 1005025000 Type nr. 2820 15 300 520 1005032000 Application: Acetylene / Oxygen 15 Standard Length: 38050 metres 610 1005038000 -40°C 700 to 100°C1005045000 15 Working Temperature: 440 Inside: EPDM 15 Colour: Black 500 790 1005051000 Reinforcement: Polyester 15 630 960 1005063000 Outside: EPDM 15 Colour: Red/Blue 750 1.450 1005076000 3821** 15 Standards: ISO1.000 1.580 1005102000
110,0
117,2
5
15
1.120
1.730
1005110000
127,0
134,2
5
15
1.250
2.000
1005127000
152,0 Ins i de di203,0 a . (mm)
159,2 Outs i de di211,4 a . (mm)
5 ng Worki Pres s 5 ure BAR
15 t Burs Pres s15 ure BAR
1.500 Bend Ra di us (mm) 2.000
2.380 Wei ght (g/m) 3.750
1005152000 Product
5,0 254,0
11,4 264,0
20 5
60 15
45 2.500
260 5.680
2820505000 1005254000
code 1005203000
6,0
15,2
20
60
75
415
2820608000
6,0
16,4
20
60
80
480
2820609000
6,3
13,5
20
60 60 340 2820606000 of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product.
8,0
15,2
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 75 410 2820808000
9,5
16,7
20
60
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
90
450
2820959000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan 1005 -
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
INDEX
WELDING & GAS HOSES
Black, reinforced, layflat water hose. Easy to handle and extremely space-saving. Flexible, even when used at low temperatures. Often used on building sites for immersion pumps, etc. or where liquids are carried under pressure. Normally installed using hose clamps, Bauer or Stortz fittings, or similar. Please contact Codan for further information.
Type nr. 1005 Application: Air / Water Hose Standard Length: 40 metres Working Temperature: -30°C to 90°C Inside: NR/SBR Colour: Black Reinforcement: Polyester Outside: NR/SBR Colour: Black Standards:
Codan 2823 Welding & Gas Hose
Ins i de di a . (mm)
Outs i de di a . (mm)
Worki ng Pres s ure BAR
Burs t Pres s ure BAR
Bend Ra di us (mm)
Wei ght (g/m)
Product code
25,0
31,4
5
15
250
420
1005025000
32,0
38,4
5
15
300
520
1005032000
Codan 2823 - EN 559: 2003
38,0 44,4 5 Black, flexible welding hose for argon. 45,0 51,4 5 For use in industrial argon-welding applications. 51,0 butyl rubber 57,4 developed to prevent 5 Special moisture from permeating the hose5 and mixing 63,0 70,0 with the medium. 82,4 5 achieved. A 76,0 very strong, non-porous weld is thus Please Codan for further information. 102,0 contact 108,8 5 110,0
117,2
5
127,0
134,2
5
380 610 1005038000 Type nr. 2823 15 440 700 1005045000 Application: Argon 15 Standard Length: 50050 metres 790 1005051000 -25°C 960 to 100°C1005063000 15 Working Temperature: 630 Inside: CIIR 15 Colour: Black 750 1.450 1005076000 Ester 15 Reinforcement: 1.000 1.580 1005102000 Outside: CIIR 15 1.120 1.730 1005110000 Colour: Black 559: 2003 15 Standards: EN1.250 2.000 1005127000
152,0
159,2
5
15
1.500
2.380
1005152000
203,0
211,4
5
15
2.000
3.750
1005203000
254,0 Ins i de di a . (mm)
264,0 Outs i de di a . (mm)
5 ng Worki Pres s ure BAR
15 t Burs Pres s ure BAR
2.500 Bend Ra di us (mm)
5.680 Wei ght (g/m)
1005254000 Product
60
60
138
2823005000
5,2
12,6
20
15
code
6,3 sheet has been prepared 13,9 20with all the information you need. This hose specification with great care in order to provide you
60 150 will affect2823006000 of vulcanised Rubber Products). The63 individual conditions of an application the life time of each product.
Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is
10,0
18,4
20
complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use 60 100 233 2823010000 with incorrect media or use in environments outside the hose specification.
15,0
24,0
20
60
Please contact Codan Rubber for individual product manufacturing tolerances.
150
341
2823015000
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
06/01/2015
Coda n Rubber Da nma rk A/S Valdemarshaab 1,DK-4600 Køge, Denmark Tel . +45 56 64 64 64 Fax +45 56 64 65 48 Mail: i nfo@coda n.com URL: www.coda n.com 07/01/2015
This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
© Codan Rubber Danmark A/S Valdemarshaab 1, DK-4600 Køge, Denmark Tel. +45 56 64 64 64 Fax +45 56 64 65 48 Mail: info@codan.com www.codan.com
8 January 2015
Codan Rubber Danmark A/S
CONTENT
2
AIR & WATER
4
AIR CONDITION
30
BRAKE
35
BREATHING
41
BUNKER
59
CHEMICAL
65
COOLANT
77
FOOD
87
GAS
99
HYDRAULIC
110
MATERIAL HANDLING 120 OIL
130
PETROL
148
POWERSTEERING
164
PVC
167
STEAM
179
WELDING & GAS
182
Since 1925 Codan has been devoted to creating flexible connections, rubber moulded parts and sealing solutions. Codan now holds a leading position as an OEM and Tier 1 supplier to the automotive, industrial and agriculture sectors. Codan production facilities are TS16949 / ISO9001 and ISO14001 accredited. Codan’s 6000 m2 European warehouse, production and test site in Køge stocks hoses for immediate delivery. Codan’s flexible hose systems are specified for respiratory equipment, vehicles, construction and farming machinery, food processing, gas and welding appliances and for use in the manufacturing industry. Codan’s extruded profiles and moulded parts are used extensively in cars, buses and plant machinery and are designed to meet OEM specifications.
INDEX
Codan Rubber Danmark A/S This hose specification Valdemarshaab 1 sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber DK-4600 Køge recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage of vulcanised Rubber Products).
Tlf. +45 56646464 The individual conditions of an application will affect the life time of each product. Therefore please ensure Fax +45 56646548 that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use www.codan.com with incorrect media or use in environments outside the hose specification. Please contact Codan Rubber for individual product manufacturing tolerances.
8 January 2015