How Is Automotive Photo Editing Is Done Using Lightroom?

How Is Automotive Photo Editing Is Done Using Lightroom?

Cameras can do wonders. However, a wrong setting or an issue with the light hampers the overall feel of the shot.

The pictures of cars suffer the same issue. Unedited images make the car look dull and disoriented. Automotive photo editing services is a tool to turn your good shot into the best. You can make the picture's subject more attractive with some minor adjustments.

Curated below is a tutorial on how to do car photo editing. These steps will help you transform the car image to stand out and create a digital masterpiece. Now, for the reference image, we'll take a picture of a raw yellow car.

Steps To Edit Automotive Photos 1. Get Done With The Basics First Before jumping onto the complexities of editing, you first need to get the basics right. Once you correct the fundamentals of the picture, the whole editing process becomes easy.

For basic editing, scroll to the Basic tool on the top panel. Start with correcting the white balance. Adjusting the white balance can help eliminate any underlying shade in the picture.

If the image has an underlying green tone, you'll need to decrease the colour temperature to 5600 and bring up the tint by 10.

Next in the basics come exposure, contrast, highlight, whites, blacks, texture, clarity, dehaze, vibrance, and saturation. Going overboard with the exposure, highlights, clarity, etc., can hamper the colour and texture of the image. It would help if you changed the tone and presence based on your judgment.

As per the convention, the clarity should lie between 0-30. Disturbing the clarity scale can disrupt the complete photo. Moderate adjustments are the best solution if you've any doubt connected to automotive photo editing.

2. Adjust The Colour Let's adjust the colours of the picture. Go to the HSL/B&W icon and scroll to "All" to exhibit all the colours. Now we'll begin the needed adjustments.

First, we'll focus on the individual shades and their customizations.

Red-Increase the saturation for red so that it pops up more.

Orange-There is no orange in the picture, so we'll skip it.

Yellow- Since yellow is the dominant shade, level up its saturation and adjust the overall effect of the colour by bringing down its brightness a unit.

Green- If the picture consists of significant green objects, you'll need to slide down the green hue to all yellow. It will remove the focus from the green in the background.

Aqua- Car windows usually show an aqua tinge. Your original photo might've had more of this aqua than required. You can reduce this significantly by lowering it to teal shade.

Blue, Purple, Magenta- Our image did not have these colours, so we ignored them.

Now, we'll hop onto the Colour Grading Panel. This feature of the lightroom photo editing services is a top-notch specialty. The Colour Grading Panel has three circles-midtones, shadows, and highlights. All these circles have a small circle in the center that hovers. If scrolled near the center, it adds a bit of saturation. The outside edges create more saturation.

At this moment, you're entirely dependent on colour theory. A good selection of colours can make the image look more pungent. The addition of warm highlights and blue shadows is the most preferred choice.

3. Linear Gradients When you're clicking a car photo, it needs to stand out. The best way to do this is to make the road and the sky darker. It will also add more dramatic visuals.

To accomplish this step, go to Masking Panel by clicking the masking icon(a circle with a dotted outline). Next, scroll down to the linear gradient.

After choosing linear gradient, click at the bottom of the picture and drag the cursor until the car. You'll notice three straight lines with a black dot in the middle covering the road.

You'll need to drag the middle line to shift the filter and the top bar to adjust the filter's length.

Pressing 'O' on the keyboard will show you the extension of the filter and the automatic

selection of 'Show Selected Mask Overlay.' A photo editing agency suggests to lower the exposure by -1.50 to darken the ground.

Let's learn how to change the Overlay colour in Lightroom. Go to the Menu bar, and click on Tools. Scroll down to Adjustment Mask Overlay. Once you click on this option, you'll notice four colours are listed-red, green, white, and black. Please choose the colour you want to overlay your image but ensure it is separable from the primary picture.

Now, let's shift our focus to the sky. The original image is one factor in mind while editing the sky. If the sky is dull, darkening in the original picture would make it more dramatic and vice versa.

In our photo, the sky is cloudy so let us make it dark. So, lower the highlight, decrease the exposure, get rid of the haze, and add a bit of warmth to complement the warm shade of the car. It will make the colour of the car pop up.

4. Final Finishings And Edits We're almost there; just the last-minute edits.

What's now left are the windows and the wheels. For both of these, we'll be using the brush tool. For Brush Tool, you'll have to navigate just like the Linear Gradient tool; both are in the Masking Panel.

Set the feather at 20, flow and density at 100, and brush size at 17.

To create contrasting wheels, brush circles on the tyres. Make sure not to overdraw on the car. Next, increase the clarity, saturation, and contrast.

To darken the windows, select it similarly, not drawing over the car. Edit it by decreasing the Dehaze.

Conclusion Lightroom might initially feel slightly twisted with all its adjustments and features. Once you follow the process, you can apply it to any picture of yours. For better results, contact Clipixie a outsource photo editing agency.