PROGRAM NEW ZEALAND
MEET THE TEAM CLAAS have fully re-engineered their tractor range since adding Tractors to their line-up in 2003. Since then, the CLAAS tractor range has grown and developed and now boast over 35 highperformance models. We have specially selected these models to deliver the power, performance, economy and efficiency demanded by the New Zealand farmer.
− 110 to 130 hp − QUADRISHIFT transmission 16X16, shift without the use of the clutch − 4 powershift speeds and 4 hydraulically shifted ranges
− 140 to 165 hp − QUADRISHIFT transmission 16X16, shift without the use of the clutch -4 powershift speeds and 4 hydraulically shifted ranges
− 125 to 165 hp − CMATIC or HEXASHIFT transmission − CEBIS, CIS+ or CIS version
− 145 to 205 hp − CMATIC or HEXASHIFT transmission − CEBIS, CIS+ or CIS version
− 205 to 295 hp − CMATIC or HEXASHIFT transmission − CEBIS, CIS+ or CIS version
− 320 to 410 hp − Continuously variable CMATIC transmission − CEBIS version
Production CPS â€“ CLAAS POWER SYSTEMS
CIS, CIS+ & CEBIS
ARION 400 ARION 600C ARION 500 ARION 600 AXION 800 AXION 900
12 14 16 18 20 22
Front End Loaders
CLAAS Service & Parts
Learn more about how CLAAS develop and manufacture tractors: tractors-making-of.claas.com
INNOVATION AT EVERY STEP
The highest quality standards, worldwide. Le Mans in France, Chandigarh in India and Harsewinkel in Germany â€“ just some of the eleven production sites worldwide where a new CLAAS machine rolls off the line every few minutes. At every site CLAAS have the same high expectations with regard to staff qualifications, assembly technology and, last but not least, the logistics and systems which enable the processes to run smoothly.
At the tractor factory in Le Mans, many production processes are automated and the individual stages dovetail perfectly. An extensive transport system carries components to the next assembly position with splitsecond precision.
The four-post test rig at the Testing Centre is extremely powerful, with 25-tonne thrust per hydraulic cylinder, a maximum frequency of 25 Hertz and a maximum height difference of 40 cm. Newly developed machines undergo full endurance testing on this test rig, which subjects them to strong vibrations to optimise the chassis or suspension, for example.
Just a few kilometres from the tractor factory, the Testing Centre trials new developments and continuously refines existing technologies. It can simulate the toughest operating conditions and demands. Every CLAAS tractor must be capable of withstanding these and must also pass a whole range of exhaustive practical tests.
On the driveline test rig at the Testing Centre, all CLAAS tractors undergo load testing with a maximum output of 500 kW per wheel and auxiliary drive. Ultra-modern technology is used to simulate a wide range of operational cycles. These test cycles have been collected and recorded on working farm machinery worldwide over many years.
CLAAS POWER SYSTEMS
The CLAAS drive system: the perfect interplay between optimal components. A CLAAS machine is much more than the sum of its individual parts. Top performance is only possible when all the parts are ideally matched and work together optimally. In CLAAS POWER SYSTEMS (CPS), CLAAS have brought together top-quality components to create an intelligent drive system that sets new standards. Full engine output only when it is required. Drives that are suited to the way the machines are used. Fuel-saving technology which quickly pays off. 6
CLAAS are constantly developing new solutions to help you make even more efficient use of your CLAAS machine. In a CLAAS tractor, the entire drive train is perfectly coordinated.
A key element of CLAAS POWER SYSTEMS is intelligent engine control, for the delivery of full power at low fuel consumption.
CPS provides an optimum combination of all operation and drive system parameters. In each case, the focus is on the effective utilisation of the specific components essential for the job in hand.
POWER, INTELLIGENCE & COMFORT Our range of specially selected CLAAS tractors give you more than you bargained for – to suit your needs, of course. They come with intelligent technology which gets the most out of the engine, not the fuel tank.
− HEXASHIFT or Continuously Variable CMATIC Transmission − Powerful and versatile four or six cylinder engines − Flexible power options from 110 to 410 hp − Intuitive and intelligent CIS, CIS + or CEBIS control terminals − Consistent, ergonomic operating concept on all models 8
CIS, CIS+ AND CEBIS
THE RIGHT CHOICE IN ANY SITUATION
CIS. Simply good. The basic version of the tractor has mechanical spool valves and the CLAAS INFORMATION SYSTEM (CIS). The CIS colour display features outstanding control ergonomics in a compact design: all settings can be activated easily via a rotary/push switch and the ESC button. Two electronic spool valves for the front loader are available as an option in the CIS version and are operated via the ELECTROPILOT on the armrest.
CIS+. Simply more. CIS+ affords impressive ease of use and an intuitive design. Despite its pleasing simplicity, it has all the necessary functionality and the automatic functions needed for effective, effortless operation. CIS+ is also available with a continuously variable CMATIC or HEXASHIFT powershift transmission. The 7" CIS colour display built into the A-pillar combines display and setting options for the transmission, electronic spool valves, F buttons and CSM headland management.
CEBIS. Simply everything. With the HEXASHIFT or CMATIC transmission, the CEBIS version features electronic spool valves and the superb CEBIS terminal with a 12" touch display. As well as enhanced automatic functions such as CSM headland management and spool valve prioritisation, it also offers many other functions â€“ CEBIS meets your every need. All settings can be entered in seconds thanks to touchscreen operation and logical menu navigation.
CIS in detail. 1. C IS display on the instrument panel and HEXASHIFT transmission display on the A-pillar. 2. Multifunction armrest 3. DRIVESTICK to operate the HEXASHIFT transmission 4. ELECTROPILOT 4-way control lever 5. Mechanical spool valves
CIS+ in detail.
1. CIS colour display on the A-pillar 2. Multifunction armrest 3. DRIVESTICK to operate the CMATIC or HEXASHIFT transmission 4. ELECTROPILOT 4-way control lever 5. Electronic spool valves
CEBIS in detail.
1. 1 2" CEBIS display with colour touchscreen 2. Multifunction armrest 3. CMOTION multifunction control lever to operate the CMATIC or HEXASHIFT transmission 4. ELECTROPILOT 4-way control lever 5. Electronic spool valves
ISO UT stands for ISOBUS Universal Terminal. All ISOBUS-enabled implements can be operated with the UT function in the CEBIS screen.
ONE FOR ALL ARION 400
Maximum output from 100 hp, designed and built for everyday use; The ARION 400 offers a wide range of applications in a compact format â€“ for mowing, baling, ploughing, spraying, and for front-loader or transport work.
Multifunction control lever.
Spacious cab for maximum comfort and optimum ergonomics.
Multifunction control lever to operate the electronic spool valves and transmission.
Four-cylinder, 4.5 litre engine delivering 110 to 130 hp1 2. One-piece, forward-sloping bonnet and radiator assembly that can easily be swung out 3. QUADRISHIFT transmission with four powershift speeds, four automated ranges and QUADRACTIV automatic shifting, plus REVERSHIFT clutchless reverser 4. Long wheelbase (2564 mm) and excellent weight distribution 5. Overall height 2736 mm (tyres 16.9 R 34) 6. Up to 6.5 t lifting capacity at the rear 7. Integrated front linkage (2.8 t) with front PTO and front loader, available ex factory 8. Two electronic spool valves with time and volume control 9. Wide FOPS transparent sunroof (Falling Object Protective Structure) 10. CIS on-board computer integrated into the instrument panel, automatic PTO engagement/disengagement and multifunction control lever
Compliant with ECE R 120
Compact and manoeuvrable.
Perfect for yard work, thanks to its reduced overall height and compact design.
Great visibility to aid loader work.
THE CLEVER ALTERNATIVE ARION 600C
If you’re looking for a reliable, well-built tractor to easily perform those everyday tasks, look no further than the ARION 600C.
With QUADRISHIFT, one press is all you need.
Comfortable and spacious cab.
The 16 gears are shifted without declutching, simply by using the + / – buttons on the hand throttle lever.
10 6 2
DPS 6-cylinder engines (common rail) with an output of 140-165 hp1 2. One-piece bonnet 3. QUADRISHIFT transmission 4. Long wheelbase and excellent weight distribution for high tractive power and enhanced driving comfort 5. 60 or 98 l/min hydraulic output 6. Three mechanical spool valves 7. Up to four PTO speeds: 540/540 (E) / 1000 / 1000 (E) 8. 4-point cab suspension 9. Clutchless shifting with + / â€“ and shift buttons 10. TCE 15 manages the linkage functions 11. Air conditioning 12. Up to ten work lights
Compliant with ECE R 120
Tackling the job in style.
A perfect team.
Great in-cab visibility make loader work easy.
Seamless combination with a CLAAS front loader.
FREEDOM TO DO MORE ARION 500
Big tractor technology in a compact 4-cylinder format. With the ARION 500 series, CLAAS offers the technology and comfort of CLAAS large tractors in the 125 to 165 hp power range1.
4-cylinder tractors up to 165 hp.
The 4-cylinder models in the ARION 500 series deliver up to 165 hp and provide outstanding versatility and power potential, particularly in PTO, transport and front loader work.
The CLAAS HEXASHIFT transmission sets extremely high standards in terms of performance and fuel consumption.
1. 2. 9
4-cylinder engines with 125 to 165 hp1 Fully Powershifted HEXASHIFT 24X24 transmission in all variants CIS, CIS+ and CEBIS including SMARTSTOP, cruise control and HEXACTIVE auto-shift function. 3. Optional CVT - CMATIC transmission in CIS+ and CEBIS models 4. Half frame concept, designed for extremeloads and great flexibility 5. Up to four PTO speeds available (540 / 540 ECO / 1000 / 1000 ECO) 6. PROACTIV suspended front axle 7. Integrated front linkage with position control front PTO and external controls 8. 4-point cab suspension 9. Cab with CEBIS, CIS+ or CIS 10. Up to 14 LED work lights 11. GPS PILOT automatic steering system
Compliant with ECE R 120
Full 4-way suspension.
Four suspension points mean that the cab is fully isolated from the chassis, preventing impacts and vibration from reaching the driver.
ELECTROPILOT integrated joystick control to incorporate tractor and loader tasks seamlessly.
FREEDOM TO DO MORE ARION 600
The ARION 600 is equipped with plenty of new features to lighten your daily workload. The top-of-the-range model has a maximum output of 205 hp. With CEBIS, CIS+ and CIS you have a choice of three equipment variants with automatic functions designed for effective, effortless operation. With all this as well as intelligent and efficient powershift and continuously variable transmissions, youâ€™ll be impressed by the ARION 600 â€“ freedom to do more.
PROACTIV front axle suspension.
The double-acting suspension with load change compensation and 100 mm suspension travel deliver outstanding ride comfort.
With the SMART STOP function, ARION 600 tractors can be brought to a standstill by pressing the brake, without needing to use the clutch pedal.
5. 2 3
High-performance 6-cylinder engines with 145 to 185 hp1, or up to 205 hp1 with CPM 2. Fully Powershifted HEXASHIFT 24X24 transmission in all variants CIS, CIS+ and CEBIS including SMARTSTOP, cruise control and HEXACTIVE auto-shift function. 3. Optional CVT - CMATIC transmission in CIS+ and CEBIS models 4. Half frame concept, designed for extreme loads and great flexibility 5. Up to four PTO speeds available (540 / 540 ECO / 1000 / 1000 ECO) 6. PROACTIV front axle suspension with CLAAS suspension kinematics 7. Integrated front linkage with position control, front PTO and external controls 8. 4-point cab suspension 9. Cab with CEBIS, CIS+ or CIS 10. Up to 14 LED work lights 11. GPS PILOT automatic steering system
The new CEBIS system includes the fully redesigned and high-resolution CEBIS terminal which has a 12-inch touch screen display.
Compliant with ECE R 120
Any size up to 42".
ARION 600 models can be fitted with tyres up to 42" or 1.95 m in diameter to increase the contact area and traction.
SPEAKS FOR ITSELF AXION 800
A tractor with benefits that speak for themselves. A control system that holds no mysteries. Comfort that makes long working days seem short. An intelligent worker that can meet any challenge.
Superior CMATIC transmission control.
Slim waist for tight turns.
Powerful acceleration, smooth deceleration and a fast response to changes in load: CMATIC powertrain management shows its maturity in all conditions and for every task.
The engine is housed in a strong frame section with an integrated engine oil sump which absorbs all the forces associated with the front linkage and front chassis.
1 3 2
Six models with a maximum output of 205 to 295 PS1 and up to 1276 Nm torque 2. Visctronic electronic fan control 3. Stage V (Tier 4) FPT engine with: − 4-valve technology − High-pressure common rail injection − Intercooler and variable geometry turbocharger (VGT) − Fully integrated SCR system and DOC (diesel oxidation catalytic converter) 4. Structural frame for the engine with integral engine oil sump, specially developed by CLAAS 5. HEXASHIFT powershift transmission or continuously variable CMATIC transmission 6. 540/540 ECO, 1000/1000 ECO PTO 7. Integrated front linkage with position control, front PTO, hydraulic connection and external controls 8. Cab with CEBIS, CIS+ or CIS 9. Driver’s seats with active suspension and ventilation 10. GPS PILOT automatic steering system
Compliant with ECE R 120
Sit better. Work better.
PROACTIV front axle suspension, suspended front and rear linkage, 4-point cab suspension and extremely comfortable seat.
A seat with active ventilation feels comfortable whatever the weather.
400 HP, FOR REAL AXION 900
Delivering the full 400 hp, the AXION 900 offers superior performance to handle any challenge.
The front axle carrier and special structural frame for the engine absorb any forces generated and make an additional frame superfluous.
With many front and rear axle ballast options, the AXION 900 is easily adapted to any application.
FPT engine with max. output of 320 410 hp1 2. Continuously variable CMATIC transmission 3. 50 or 40 km/h at reduced engine speed 4. Rear wheels: diameter up to 2.15 m 5. Overall length 5.60 m 6. 1000 ECO PTO 7. Up to eight spool valves 8. Parallelogram-sprung front axle with integral brake 9. Fully integrated front linkage with up to 6.5 t lift capacity 10. Mechanical 4-point cab suspension 11. Up to 20 work lights, including up to 12 LED lights 12. GPS PILOT automatic steering system
Compliant with ECE R 120
Multifunction armrest with CEBIS.
A broad base.
Everything under control, everything in view: the armrest with the integral CMOTION multifunction control lever and CEBIS terminal.
Rear tyres up to 900 mm wide and 2.15 m in diameter guarantee efficient conversion of tractive power.
EVERYTHING AT YOUR FINGERTIPS CLAAS FRONT LOADERS
Mechanical or hydraulic self-levelling linkage.
Can be equipped with hydraulic self-levelling linkage which maintain the angle of the attachment precisely and automatically.
The MACH quick coupler enables all hydraulic and electrical lines to be connected with just a simple hand movement, even when they are under pressure.
CLAAS FRONT LOADERS
8 1 3 2
Max hei ght at pi vot poi nt Max hei g ht at ho ri zo nt al bucket po s i t i o n Max ri ppi ng po w er at pi vo t po i nt Capaci ty at attachment pi vot poi nt Max capaci ty on pal l et O pt i o nal hydraul i c s el f- l evel l i ng
Choice of convenient operating systems: PROPILOT, FLEXPILOT, TECHPILOT, ELECTROPILOT. MACH quick-attachment coupler for electric and hydraulic circuits FITLOCK system for quick, safe and convenient fitting / removal SHOCK ELIMINATOR vibration damping Integrated hose lines allow an excellent view and prevent damage SCS system: synchronises the third function with bucket filling or dumping ACS for automatic attachment positioning SPEEDLINK for fully automatic fitting and removal of all attachments, including those with hydraulic and electrical functions
FL 100C 4m 3.75m 2.4 t 2.2 t 1.6 t
FL 100 4m 3.75m 2.4 t 2.19 t 2.08 t
FL120 4.15 m 3.90 m 2.75 t 2.45 t 2.41 t
GPS PILOT with S10 terminal.
GPS PILOT uses a satellite signal to guide the machine securely and effortlessly in parallel lines. The system helps the operator to utilise the machineâ€™s full working width and reduces overlapping, giving higher-quality work in a shorter time irrespective of light or weather conditions. GPS PILOT is operated from the S10 terminal or S7 terminal.
The SATCOR correction signal is transmitted by geostationary satellites and is available worldwide. Choose from SATCOR 5, with a signal accuracy of approximately 5cm, developed for precision work or SATCOR 15, which has an accuracy of 15 cm.
Even the very best operators can’t be everywhere at once. That’s why we have developed perfect systems for steering, measuring, visualisation and sensing. Right where you need them: in the field.
The TURN IN function makes it easier to line up on the headland. It quickly identifies the right track and steers into the new track more accurately than would be possible manually. TURN IN makes it possible to activate the steering system from an angle of 120° to the track and direction of travel.
With the AUTO TURN function the machine turns automatically at the headland, enabling you to line up with your selected track faster and more accurately, avoid overlaps and concentrate on the implement settings. The virtual headland line in the S10 makes AUTO TURN even more convenient.
WHATEVER IT TAKES CLAAS SERVICE & PARTS
Your requirements count.
You can always rely on us: weâ€™ll be there whenever you need us. Everywhere. Fast. Reliable. 24 hours a day if necessary. With a complete solution for your machine or business.
ORIGINAL parts and accessories.
Specially matched to your machine: precisionmanufactured spare parts, high-quality consumables and useful accessories. We will supply exactly the right solution from our comprehensive product range to ensure that your machine is 100% reliable.
For your business: CLAAS FARM PARTS.
CLAAS FARM PARTS offers one of the most comprehensive spare parts programmes, regardless of brand and sector, for all agricultural applications on your farm.
Always up to date.
CLAAS dealers are among the most efficient agricultural technology businesses in the world. Our service teams are ideally qualified and equipped with the all-important special tools and diagnostic systems. CLAAS Service stands for high-quality work which meets all your expectations with regard to expertise and reliability.
CLAAS SERVICE & PARTS
CLAAS service products help you to increase machine reliability, minimise the breakdown risk and base your calculations on predictable costs. CLAAS MAXI CARE offers planned reliability for your machine.
Worldwide coverage from Hamm.
CLAASâ€™ central spare parts warehouse delivers all ORIGINAL parts quickly and reliably all over the world. We can supply the right solution for your harvest or your business within a very short time.
The CLAAS Parts Logistics Center in Hamm, Germany, stocks more than 155,000 different parts and has a warehouse area of over 100,000 m2.
A RI ON Engine Number of cylinders / intake Cubic capacity Nominal engine speed Output at nominal engine speed (ECE R 120)1 Max. output (ECE R 120)1 Max. output with CPM (ECE R 120)1 Type approval value (97/68/EC)2 Max. torque (ECE R 120)1 Transmission Ratios (F / R) Powershift speeds Max. speed PTO speed Max. flow at rated speed Number of spool valves Max. lifting capacity at rear linkage Overall length Overall height Wheelbase Turning radius Tare weight
ARI O N Engine Number of cylinders / intake Cubic capacity Nominal engine speed Output at nominal engine speed (ECE R 120)1 Max. output (ECE R 120)1 Type approval value (97/68/EC)2 Max. torque (ECE R 120)1 Transmission Ratios (F / R) Powershift speeds Max. speed PTO speed Max. flow at rated speed Number of spool valves Max. lifting capacity at rear linkage Cab suspension Overall length Overall height Wheelbase Turning radius Tare weight
cm3 rpm kW/hp kW/hp kW/hp kW Nm
km/h rpm l/min min/max kg mm mm mm m kg
cm3 rpm kW/hp kW/hp kW Nm
km/h rpm l/min kg mm mm mm m kg
430 DPS 4 / TI 4525 2200 85/115 88/120 95/130 98 510 QUADRISHIFT 16/16 4 40 540/540E 1000/1000E 98 2+2 6500 4442 2761 2564 4.40 4900
410 DPS 4 / TI 4525 2200 70/95 75/100 81/110 83 460 QUADRISHIFT 16/16 4 40 540 1000 98 3 6500 4442 2736 2564 4.40 4800
640 C DPS 6/TI 6788 2200 114/155 121/165 116 667 QUADRISHIFT 16/16 4 40 540/540E 1000/1000E 98 3 6900 ○ 5155 3055 2820 4.85 5930
620 C DPS 6/TI 6788 2200 99/135 103/140 103 580 QUADRISHIFT 16/16 4 40 540/540E 1000/1000E 98 3 6500 ○ 5155 3055 2820 4.85 5600
ARI O N Engine Number of cylinders Cubic capacity Rated output (ECE R 120)1 Max. output (ECE R 120)1 Max. output with CPM (ECE R 120)1 Engine speed at maximum output Type approval value for CMATIC models2
Type approval value for HEXASHIFT models2 Max. torque (ECE R 120)1
cm3 kW/hp kW/hp kW/hp rpm kW kW Nm
Transmission Ratios F / R (HEXASHIFT / CMATIC) Max. speed PTO speed Max. flow at rated speed Number of spool valves Max. lifting capacity at ball ends Overall height Wheelbase Length (from front weight carrier to rear lower links) Optimum turning radius Weight
km/h rpm l/min kg mm mm mm m kg
660 DPS 6 6788 129/175 136/185 151/205 2000 139 – 833 (with CPM) CMATIC
650 DPS 6 6788 129/175 136/185 – 2000 128 139 754
630 DPS 6 6788 114/155 121/165 – 2000 115 115 703
610 DPS 6 6788 99/135 107/145 – 2000 102 102 640
530 DPS 4 4525 99/135 107/145 – 2000 106 106 612
cont. variable 50/40 540/540E/ 1000/1000E 150 4 8000 3050 2820 4818 5.50 7860-8335
24 / 24 50/40 540/540E/ 1000/1000E 150 3+2/4 8000 3050 2820 4818 5.50 6980-7830
24 / 24 50/40 540/540E/ 1000/1000E 110 3+2 8000 3050 2820 4764 5.50 6740-7600
24 / 24 50/40 540/540E/ 1000/1000E 110 3+2 7500 3050 2820 4759 5.50 6530-7470
24 / 24 50/40 540/540E/ 1000/1000E 110 3+2 7500 3000 2564 4503 4.95 6000-6940
A XI ON Engine Number of cylinders Cubic capacity Nominal engine speed Output at nominal engine speed (ECE R 120)1 Max. output (ECE R 120)1 Type approval value2 (CMATIC / HEXASHIFT) Max. torque (ECE R 120)1
850 FPT 6 6728 2150 184/250 194/264
830 FPT 6 6728 2150 165/225 173/235
810 FPT 6 6728 2150 151/205 158/215
cm3 rpm kW/hp kW/hp kW
1276 CMATIC cont. variable
1132 CMATIC cont. variable
1016 HEXASHIFT 24 / 24
941 HEXASHIFT 24 / 24
50/40 540/540E/ 1000 205 4 10200 ● 5428 3215 2980 5.31 9050
50/40 540/540E/ 1000 205 4 10200 ● 5428 3215 2980 5.31 8700
50/40 540/540E/ 1000 150 4 9700 ● 5428 3215 2980 5.31 8400
50/40 540/540E/ 1000 150 4 9500 ● 5428 3215 2980 5.31 8300
Max. speed PTO speed
1450 CMATIC cont. variable 50/40
Max. flow at rated speed Number of spool valves Max. lifting capacity at rear linkage Cab suspension Overall length Overall height Wheelbase Turning radius Tare weight
220 6 10950 ● 5590 3452 3150 6.80 12840
Transmission Ratios F / R (HEXASHIFT / CMATIC)
870 FPT 6 6728 2150 205/2803 217/2953
930 FPT 6/TI 8710 2150 254/345 257/350
kg mm mm mm m kg
WHAT OUR CUSTOMERS THINK
Harvey Kloeten | Dairy Farmer | Waikato 35
OUR NEW ZEALAND
CLAAS HARVEST CENTRES North Island
BAY OF PLENTY
ROTORUA 292 Te Ngae Road 07 345 5599
WHANGAREI 239-241 Port Road 09 430 3066 TARANAKI
DUNEDIN 18 Stack Street Airport Turnoff Allanton 03 489 8886
GORE 5 Surrey Street 03 263 1000
ASHBURTON Main South Road Tinwald 03 307 9400
FEILDING 53 Kawakawa Road 06 323 0101
HAWERA 289 Waihi Road 06 278 0020
HASTINGS 1320-1322 Omahu Road 06 872 1010
HAMILTON 87 Kahikatea Drive 07 843 9100
CHRISTCHURCH 735 Main South Road Templeton 03 341 6900 TIMARU 72 Hilton Highway Washdyke 03 688 6900 WAIPARA 6 Mt Cass Road 03 314 6899
WANAKA 156 Ballantyne Road 03 443 6781 RANFURLY 16 Mitchell Street 03 489 8886
INVERCARGILL 25/3 Wallacetown-Lorneville Highway 03 215 6114 WESTLAND
KUMARA JUNCTION 32 Otira Highway 03 755 8450