Established 1969
Code
Range
H52
3/4” Drive
Torque (Ft lbs)
50 - 300
68 - 405
3/4” DRIVE TORQUE WRENCH Standards:
Code
Range
H53
3/4” Drive
Torque (Ft lbs)
100 - 700
Code
Range
H54
1” Drive
Torque (Ft lbs)
100 - 700
Code
Range
H55
1” Drive
Torque (Ft lbs)
200 - 1000
TORQUE MULTIPLIER Code
Description
H52
H53
DIN 3122 Torque Length (mm) (Nm)
H53
1092
H54
DIN 3122 Torque Length (mm) (Nm)
135 - 950
1” DRIVE TORQUE WRENCH Standards:
865
135 - 950
1” DRIVE TORQUE WRENCH Standards:
H52
DIN 3122 Torque Length (mm) (Nm)
H54
1230
DIN 3122 Torque Length (mm) (Nm)
300 - 1500
H55
H55
1100
Ph: 07 - 3326 1500
Standards:
6. Torque Wrenches
3/4” DRIVE TORQUE WRENCH
08520-08520RB
Weight (grams)
Torque (Ft lbs)
Input
Output
Torque 3/4” Drive 1” Drive 3260 2000 Multiplier 880Nm 2700Nm Spare Reaction 08520RB 4000 Bar A torque multiplier is a device that increases the torque that can be applied by the user. This torque multiplier incorporates an epicyclic gear train which is configured to multiply the input torque applied by a factor of 3. They are used to apply torque in a controlled manner to tighten or loosen larger fasteners. When correctly used they apply torque smoothly and slowly whilst at the same time greatly reducing the amount of physical effort required by the operator. Made from CR-MO to a hardness of 50-55 HRC. 08520
1/2” DRIVE TORQUE WRENCH SET 8PC Code
Range
Torque (Ft lbs)
Torque (Nm)
Email: Sales@cltoolcentre.com
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Length (mm)
08520-08520RB
H60
H60 1/2” Drive 7 - 59 10 - 80 420 Set includes; Interchangeable torque handle, 1/2” DR ratchet head and 6 spanner heads: 17, 22, 24, 26, 27 and 29mm. Spanners are made from CR-V to a hardeness of 43-48 HRC. H60 in case
kctools.com.au
109.