Issuu on Google+

Product Catalogue 2008

2008 Chrosziel GmbH Klausnerring 6 D-85551 Heimstetten b. München (Munich) Germany Phone +49 89 90 10 91 0 Telefax +49 89 44 70 66 1 E-Mail info@chrosziel.de www.chrosziel.de Web Managing Directors: Harm Abrahams, Jürgen Nußbaum HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 For our deliveries and services solely our General Terms of Trade apply.

Catalogue of all products manufactured by Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten / Munich


Product Catalogue 2008 Page 2

Content

__

For TV and Cine Production MB 602 Studio MatteBox 6.6x6.6 MB 840 Production MatteBox 4x5.65 / 5.65x5.65 MB 805 Production MatteBox System 4x4 / 4x5.65 MB 415 Wide Angle MatteBox 4x5.65 / 5x5.65 SD 412 Wide Angle SunShade 4x5.65 / 5x5.65 System C2 – Combi System 4x4 / 4x5.65 SD 411 SunShade 4x4 SD 421 SunShade for Cooke S4 lenses 4x5.65 Light-Weight-Supports (HD) for hand grips Light-Weight-Supports QuickLock, Sliding Camera Plates, Adaptors Studio Rig follow-focus systems Fluid Zoom Drives for Cine and Video lenses Lens Supports ACVF Cine-style Viewfinder for Sony HDVF-C30W & HDVF-C35W (F23/35) Abakus Viewfinder Extension

____ ___ page 6-7 8-9 10-11 12-13 14-15 16-19 20-21 22 23 24 25-26 27-28 29 30 31 32

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.

_


Product Catalogue 2008 Page 3

Content For DV und HDTV Camcorder & 16mm Cine MB 450 MB 450

MatteBox product line 4x4 / 4x5.65 Ready to use Kits 450-EX1KIT for Sony PMW-EX1 450-HDVKIT for Sony HDR-FX1 & HVR-Z1 450-HVXKIT for Panasonic HVX-200 /200A 450-HMCKIT for Panasonic HPX171 / HMC151 450-JVCKIT for JVC GY-HD100/101 450-JVCTPKIT for JVC GY-HD200/251 450-V1KIT for Sony HVR-V1 450-XHG1KIT for Canon XH G1/G1S/A1/A1S 450-XLHD1KIT for Canon XL HD1 Selector Guide MB 450 CMB-R10/20 SunShades 4x4 for 1/3” Video Chip Selector Guide CMB-R10/20 & camera / adaptor rings SD 440 SunShade 4x4 for 16mm Cine, 1/2” & 1/3” Video Chip SD 1000 SunShade 3x3 for 16mm Film/Cine, 1/2” & 1/3” Video Chip Overview Formats / focal length / picture angle Studio Rig DV Follow Focus for DV & HDV Camcorder ® Follow Focus for Autofocus Camcorder HDV Rig VariLock ® Shoulder Brace system for Camcorder DV Balancer

___ _____ page _ 34-36 35

36 37-38 37 39 40 41 42 43 44-45

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product Catalogue 2008 Page 4

Content

__

___ ___

General Information

page

__

Overview pages: MatteBox Light Prevention Rings Rubber Bellows, Retaining-rings, Insert-rings SunShade Clamp-Rings Step-down-rings, Adaptor-rings, Intermediate-rings Filterholders Accessories & Spare Parts Lens Diameters Video / TV - 2/3” format (SD & HD) DV / HDV – 1/2”, 1/3” format Cine lenses Remote Systems Colibri Wireless Remote Dimmer DigiFOX Wireless Remote Follow Focus Aladin Wireless Remote Lens Control Cables for Wireless Systems Lens Testing Equipment Collimation Projection Mounts

46-47 48-50 51 52 53-55 56-57 58 page 60-61 62-63 64-65 66-67 page

UniversalCamCollimator, LensCamCollimator, Autoreflex Collimator 68-69 Lens-Test-Projector LTP MK5 70 for collimation and projection (photo/cine/video) 71

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.

__

__


Product Catalogue 2008 Page 5

Products for TV- and Movie-Production

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product Catalogue 2008 Page 6

MB 602 – Studio MatteBox for Movie and HD-Cine production Production MatteBox with Swing-Away Design, complete set for individual configuration with further accessories Swing-Away-Design for quick and easy lens change. Use of two, three or four filters combined with quick-lock filter stages. For bridge plates with 19 mm or 15 mm rods. Connecting diameters of 165 and 142.5 mm fit to Adaptors and Rubber Bellows for all Prime and Zoom lenses of Movie- and HD-Cine cameras. The set includes one large French Flag and adjustable side wings. The 1st filter stage is not detachable and carries the quick-lock; the second compartment of the set holds 3 filters in 2 stages; both stages rotate. The 2nd and the 3rd filter can be precisely positioned by a toothed gear. The 3rd and the 4th filter are located in one stage and can be moved against each other and rotated together. A flexible shaft and 4 filter holders are also part of the set. Optionally a set of 4 masks is available to optimise shading for lenses with longer focal length. For extreme wide angles, the MB602 is used with the additional single filter stage, rotatable, and with geared positioning. A further accessory for individual configuration is the double rotatable filter stage.

Technical data: Max. wide angle focus length F=mm Format 16:9 Masks for F=mm Max. filter number / rotating / gear positioned Filter stage width (mm) Filter size (inch) Connecting diameter (mm) Support system: bridge plate with rod ∅ mm Height adjustment

S16 6 / S35 10 / KB 17 SD 4.1/ HD 4.5 S35 and HD 8 / 12/ 20 / 40 4/3/2 177 6.6 x 6.6 165 & 142,5 15 or 19 ±5 mm

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 7

MB 602 – Studio MatteBox for Movie and HD-Cine Production Components MB 602 complete for bridge plates with 19 mm rods MB 601 complete for bridge plates with 15 mm rods Accessories The following filter stages can be used instead of the included filter stages: Single Filter Stage 6.6 x 6.6, rotating, geared Double Filter Stage 6.6 x 6.6, rotating, geared Special accessories Insert filter holder 5.65x5.65 use inside 6.6 x 6.6 filter holders Insert filter holder 5 x 6 to use inside 6.6 x 6.6 filter holders Insert filter holder multi format 4 x 4 / 4 x 5.65 to use inside 6.6 x 6.6 filter holder Set of 4 Mattes, for 8, 12, 20 und 40 mm focal lengths Spare part selection Filter holder 6.6 x 6.6 Geared Filterholder 6.6 x 6.6 French Flag for MB 601 / 602 Set of Side Wings (without pivot mechanism) Set of 2 pivot mechanisms to hold side wings Flexible Shaft to operate geared filter holders Intermediate Ring 165:142,5 mm Connections ∅ 142,5 mm Rubber Bellows 142,5 to 85mm (Fujinon HA10x5) Rubber Bellows 142,5 to 95mm (Fujinon A10x4.8, Canon J11x4.5) Rubber Bellows 142,5 to 100mm Rubber Bellows 142,5 to 110mm Intermediate Ring 142,5 to 114 mm Intermediate Ring 142,5 to 117 mm

Article number 602-01 upon request

601-CF-W1 601-CF-W22 610-01-565 610-01-56 610-01-45 610-MA 610-01 610-02 610-09 610-10 610-PM 610-20 610-14

410-47

Connections to ∅ 142,5 mm Intermediate Ring 142,5 to 120 mm

410-50

410-14F

Intermediate Ring 142,5 to 121 mm

410-57

410-13 410-11 410-12A 410-52

Please choose the insert ring for your respective lens

Intermediate Ring 142,5 to 128 mm 410-53 Intermediate Ring 142,5 to 130 mm 410-49 Intermediate Ring 142,5 to 132 mm 410-51 Intermediate Ring 142,5 to 135 mm 410-54 Please choose support system for your respective camera

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 8

MB 840 - Production MatteBox for Cine and TV, compact and versatile Production MatteBox with Swing-Away-Design, complete set with Double Filter Stage for 2 rotating filters Swing-Away-Design for quick and easy lens change. The quick-lock device allows an easy change of the Double- against the Triple Filter Stage. The swing-away bracket fits on Light Weight Supports with 15 mm rod diameter. The connecting diameter is 142.5 mm. Light protection rings (and step down rings respectively) are available for all prime and zoom lenses of film and SD / HD TV-cameras. The MatteBox comes with a large, foldable French Flag and 2 individually rotating filter-stages. The filter-holders are equipped with multi-format clamping. The first stage takes 4x5.65 vertical and 5.65x5.65 filter sizes, the second 4x5.65 vertical, horizontal and 5x5. Further options for individual use: The Triple Filter Stage (slightly limiting the wide angle range to 5.2 mm), Side-Wings and bottom French Flag

Special Feature:

The Clamp Adapter (∅ 130 mm) replaces the Swing-Away Bracket and makes the MatteBox a SunShade, the SD 840. Special version for RED One available: For 19mm support system, double rotating stage with 2 identical multiformat filterholders for 4x5.65”v/5x5”. Usable max. wide angle is F=12mm. The Triple Stage is also an option.

Technical data: Tool-free exchange of Clamp Adapter (∅ 130 mm) and Swing-away Bracket

Max. wide angle focus length F=mm Multi Format 4:3 and 16:9 Mattes 4:3 for F=mm Mattes 16:9 for F=mm Max. filter number / rotating / gear positioned Filter stage width (mm) Filter size (inch)

Locking of the 1st rotating plate and the entire filter-stage

Connecting diameter (mm) Light weight support for rod ∅ mm * Through adaptors also bridge plates 15 und 19

S16 6 / S35 10 / KB 17 SD 4.2 / HD 4.5 S16, 35, SD, HD 4.8/10/20/30/48 4.8/10/20/30/48 3/3/150 4x5.65v/5x5 + 4x5.65vh/5.65x5.65 142,5 15 * mm

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 9

MB 840 - Production MatteBox for Cine and TV, compact and versatile Components Article no. MB 840 MatteBox for 15mm support systems 840-01 SD 840 SunShade, clamp version 840-13 MB 840 complete, with additional Clamp Adapter 840-01/kit MB 840 MatteBox (RED One) for 19mm support systems 840-01R Accessories Clamp Adaptor with ∅ 130 mm 840-20 Swing-Away-Bracket 840-23 840-42 Triple Filter Stage, for triple rotation (without filter holder) Swivel Filter Stage, double stage with dual rotation, 840-41S 1st filter ± 6° vertical swivelling (without filter holder) Set of Side Wings 410-200 Set of Mattes 4:3 410-MA43 Set of Mattes 16:9 410-MA169 Adapter for 15:19, for bridge plate with 19 mm rods 401-17 Adapter for 15:15, for bridge plate with 15 mm rods 401-18 Adapter 15:19 QuickLock, plugs on 19 mm support rods 401-10Q Pivot mechanism for Bottom French Flag 410-02-08 Please choose the support system according to the camera and adaptor rings fitting the lens size For Light Prevention Rings, Clamp Rings and Support Systems, see the respective information pages.

Swivel Filter Stage 840-41S

Triple Filter Stage, all filters rotate, 840-42

Spare part selection Dual Filter Stage, for dual rotation 840-41 French Flag 410-30 Filter holder 4x5.65 vertical / 5.65x5.65 510-05 Filter holder 4x5.65 vertical and horizontal / 5x5 410-32 Pivot mechanism for Side Wings (Set of 2) 410-PM116 All filter holders for filter stages with 150mm, see filter holder summary.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 10

MB 805 - Production MatteBox for Cine and TV, versatile upgradeable. Production MatteBox with Swing-Away-Design, starter set with Single Filter Stage Swing-Away-Design for quick and easy lens change. The built-in Single Filter Stage accommodates a further Single, Double or Triple Filter Stage through a quick-lock. All further stages rotate. All 150mm filter holders can be used. For use of the maximum angle of field*, we deliver and recommend the following set: The first fixed stage is equipped with a multi format filter holder for 4x4 and 4x5.650 filters. The additional single stage should be equipped with a 5x5 and 4x5.650 multi-format filter holder (FH 510-01). For the dual and triple-filter-stage, we recommend the 4x4 and 4x5.650 multi-format filter holder (FH 410-31). The swing-away bracket mounts on light weight supports with 15mm rods, or by means of adaptors to bridge plates with 15 or 19 mm rods. The connecting diameter is 142.5mm. Light prevention rings exist for all prime and zoom lenses of film and SD/HD TV-camera. A large foldable French Flag is part of the set. Side Wings are optional. For maximum stray light reduction, sets of mattes in the formats 4:3 and 16:9 are available. A special version for RED One with 19mm support is also available. Usable max. wide angle is F=9 / 10 / 12 / 18 mm depending on stages used.

Technical data:

Max. wide angle focal length of other formats, F=mm: S16: 5 / 6 / 7 / 10 S35: 9 / 10 / 12 / 18 KB: 15 / 17 / 20 / 29 SD: 3.6 / 4.1 / 4.8 / 7.2

Max. wide angle focus length (2/3“ Chip) F=mm * 3,9 / 4,5 / 5,2 / 7,8 Multi Format 4:3 and 16:9 S16, 35, SD, HD Mattes 4:3 for F=mm 4,8 / 10 / 20 / 30 / 48 Mattes 16:9 for F=mm 4,8 / 10 / 20 / 30 / 48 Max. filter number / rotating / gear positioned 4/3/Filter stage width (mm) 150 Filter size (inch) 4x4 / 4x5.65h + 5x5 / 4x5.65h Connecting diameter (mm) 142,5 Light weight support for rod ∅ mm 15** * * Through adapters also bridge plates 15 und 19 mm

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 11

MB 805 - Production MatteBox for Cine and TV, versatile upgradeable. Components MB 805 MatteBox start package, complete as described above MB 805 MatteBox start package for 19 mm supports Single-Filter-Stage, rotatable, Fmax=4,5mm (without filter-holder) Double-Filter-Stage, rotatable , Fmax=5,2mm ( without filter-holder ) Triple-Filter-Stage, rotatable, Fmax=7,8mm ( without filter-holder ) Accessories Multi format filter holder 4x4 / 4x5.65 horizontal (recommended) Multi format filterholder 5x5 / 4x5.65 horizontal ( recommended ) Swivel-Filter-Stage, single stage, rotatable, Fmax=5,2mm ( without filter-holder ) Filter ± 6° vertical pivoting Pair of Side Wings Set of mattes 4:3 (F = 4,8 / 10 / 20 / 30 / 48 mm) Set of mattes 16:9 (F = 4,8 / 10 / 20 / 30 / 48 mm) Pivot mechanism for bottom French Flag French Flag (for bottom)

Article no. 805-02 805-02R 820-01 820-02 820-03 410-31 510-01 820-05 410-200 410-MA43 410-MA169 410-02-08 410-30

Please choose support system according to the camera and adaptor rings fitting the lens diameter For Light Prevention Rings, Clamp Rings and Support Systems, see the respective information pages. Spare part selection Pivot mechanism for Side Wings (Set of 2)

410-PM116

This Swing-Away-System may also be combined with the S16 Bellows-Housing. For further information see pages referring to MB C2

Single, Double and Triple Filter Stage, for optimum configuration of the MB 805. All stages are rotatable and can be selectively attached to the first stage.

Swivel Filter Stage to blank out reflexes caused by luminaries in the scene, e. g. headlights of a car.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 12

MB 415 - Wide Angle MatteBox, compact, for two filters up to 4.5mm focal length. Production MatteBox for 15 mm support systems Includes a Double Filter Stage for filters up to 5.65x5.65 and 5x6” vertical. Both filters can be moved and fixed in any vertical positions, the second also rotates, depending on the used filter 360 ° or up to 240º. For optimum use of the picture angle, the first filter stage is equipped with a multi format filter-holder for 4x4 and 4x5.65” filters, the second with multi format filterholder for 5x5 and 4x5.65” filters. Using 4x5.65” filters in the front stage and 5x5“ in the second, makes full use of the wide angle format for any position of the rotating stage. For even more flexibility when using e.g. graduation filters, insert 5x6” filters in the first stage (filter-holder 510-02). Special feature - a third stage inside the rubber bellows for round filters with 138mm of diameter. Not possible with 4.5mm zoom lenses, due to their front ring position. This MatteBox mounts on 15mm Lightweight Supports. The connecting diameter of 95mm fits the current wide angle zoom lenses. Choose also between two standard versions for 100 and 110 mm connection of light protection rings. The 39 cm wide French Flag is included in the standard package. Side-wings can be used optionally. For maximum stray light reduction, use mattes. Sets for 4:3 and 16:9 available.

Technical data: S16 6 / S35 10 / KB 17 SD 4.2 / HD 4.5 Multi-Format 4:3 and 16:9 S16, S35, SD, HD Mattes 4:3 for F=mm 4,8/10/20/30/48 Mattes 16:9 for F=mm 4,8/10/20/30/48 Max. filter number / rotating / gear positioned 2+1 / 1 / Filter stage width (mm) 150 Filter size (inch) 4x4/4x5.65h + 5x5/4x5.65h Connecting diameter (mm) 95 / 100 / 110 Light weight support for rod ∅ mm 15** * * Through adapters also bridge plates 15 und 19 mm Max. wide angle focus length F=mm

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 13

MB 415 - Wide Angle MatteBox, compact, for two filters up to 4.5mm focal length.

Third filter-holder inside the rubber bellows, for round filters with ∅ 138mm (Do not use with wide angle Zoom lenses with 95mm front diameter).

Components MB 415 MatteBox for wide-angle, complete as described above, 95mm end ring for Zooms MB 415 MatteBox for wide-angle, complete, 100mm connection MB 415 MatteBox for wide-angle, complete, 110mm connection

415-02F100 415-02F110

Accessories Pivot mechanism for Side Wings (Set of 2) Pair of Side Wings Filter holder 5x6 vertikal

410-PM116 410-200 510-02

Set of Mattes 16:9 (F = 4,8 / 10 / 20 / 30 / 48 mm) Set of Mattes 4:3 (F = 4,8 / 10 / 20 / 30 / 48 mm) French Flag, 45cm, foldable (optional)

410-MA169 410-MA43 410-30

Article no. 415-02F

Please choose support system according to the camera and adaptor rings fitting the lens diameter

For Light Prevention Rings and Support Systems, see the respective information pages.

Mattes for further reduction of stray light and reflections. Available in 16:9/HD-cine/S35 and SD4:3 format.

Spare part selection MatteBox housing French Flag, 39cm, foldable Multi format filter holder 4x4 / 4x5.65 horizontal (recommended) Multi format filter holder 5x5 / 4x5.65 horizontal (recommended)

CLWAH-F4.5-01 410-29 410-31 510-01

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 14

SD 412 –Wide Angle Sunshade, for two filters up to 4.5mm focal length. Clamp-on Sunshade in three versions. The technical data of the three versions is identical except for the maximum clamp diameters (104 / 110 / 130 mm). The included Double Filter Stage takes filters up to 5.65x5.65“. Both filters slide vertically and can be fixed in any position, the second also rotates 250°. For optimal use of the picture angle, the filter-stages are equipped with multi format filter-holders for 4x4 and 4x5.65” filters in the first stage and, in the second, rotating multi format filter-holder for 5x5 and 4x5.65” formats. Insert 5x5“ filters and fully use the wide angle format in any position of the rotating stage. For even more flexibility when using e.g. graduation filters, insert 5x6” filters in the first stage (filter-holder 510-02). The connecting diameter of 104 mm and the respective Step-Down Rings fit most lenses. For the further two standard versions with 110 and 130mm clamp-on diameter various Step-down rings are available. The French Flag is included, Side Wings are optional. For maximum stray light reduction, sets of mattes for 4:3 and 16:9 formats are available. Tip: Check the correct positioning of the side wings when using super wide angle lenses to avoid vignetting.

Technical data: S16 6 / S35 10 / KB 17 SD 4.2 / HD 4.5 S16, S35, SD, HD Multi-Format 4:3 and 16:9 4,8/10/20/30/48 Mattes 4:3 for F=mm 4,8/10/20/30/48 Mattes 16:9 for F=mm 2/1/Max. filter number / rotating / gear positioned 150 Filter stage width (mm) Filter size (inch) 4x4/4x5.65h + 5x5/4x5.65h 104 / 110 / 130 Connecting diameter (mm) Clamp adaptor * Support system: * With Center Bracket also usable on 15 mm rod support. Max. wide angle focus length F=mm

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 15

SD 412 –Wide Angle Sunshade, for two filters up to 4.5mm focal length. Components SD 412 SunShade for wide-angle, complete as described above , 104 mm connection SD 412 SunShade for wide-angle, complete , 110mm connection SD 412 SunShade for wide-angle, complete , 130mm connection

The Wide-angle SunShade is available with three clamp systems. Select Step-down rings for the respective lens diameters.

The Center Adaptor connects the SD 412 with the Light-WeightSupport (not for ∅ 130 mm).

Article no. 412-02F 412-02F110 412-02F130

Accessories Filter holder 5x6 vertical

510-02

Pivot mechanism for Side Wings (Set of 2) Pair of Side Wings Set of mattes 4:3 (F = 4,8 / 10 / 20 / 30 / 48 mm) Set of mattes 16:9 (F = 4,8 / 10 / 20 / 30 / 48 mm) Step Down Ring 104 to 95 mm (fits many video zoom lenses) Step Down Ring 104 to 95 mm (fits many video prime lenses) Center Adaptor**

410-PM116 410-200 410-MA43 410-MA169 411-28F 411-28 420-02

Please select support according to camera and light protection or step down ring according to lens. For information on light protection rings and on the various support systems, see the respective overview pages. Spare part selection Multi format filter holder 4x4 / 4x5.65 horizontal (recommended) Multi format filter holder 5x5 / 4x5.65 horizontal (recommended) French Flag 39 cm, foldable MatteBox housing

410-31 510-01 410-29 CLWAH-F4.5-01

** for use as supported MatteBox on 15mm Light-Weight-Supports.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 16

C2 MatteBox – Double Filter Stage 4 x 5.65”/4x4” and 2 housings to combine. Choose MatteBox or SunShade and the Mattebox housing depending on your application. The MatteBox configuration mounts on the Double Filter Stage CF-MB/ST, which includes a multi format filter holder (410-31) for 4x4“ and 4x5.65“ filters in the first stage and, in the second, a rotating filter-holder (402-04) for 4x4“. Both filters slide vertically and can be fixed in any position, the second also rotates 240º. The Rubber Bellows adapts to the 100 mm ∅ (resp. 110 mm, CF-MB/ST110). The Step down Rings with 100/110 mm thread guarantee perfect fit to the lens. Without Rubber Bellows, use ∅ 142.5 mm and the respective light protection rings. The CWAH-1FC housing is designed for lenses up to 5.2 mm focal length and max. 4.5mm, provided only the first filter is used with Insert-Ring 410-55, 100:95 mm. The set comes with the French Flag and the Insert Mattes for 16:9. Side-Wings and Bottom French Flag are optional. Use the CBH-S16 housing with bellows and removable mattes for the Super 16 / 16:9 formats. French Flag and a set of Side Wings are included. The maximum wide angle focal length is 5.2mm (referring to 2/3“HD).

Technical data CF-MB combinations:

The double filter stage CF-MB/ST is the basis for the MatteBox combinations MB C2. Various light protection rings for 100 mm thread are available.

Max. wide angle focus length (2/3“ Chip) F=mm Multi Format 4:3 and 16:9 Mattes 4:3 for F=mm Mattes 16:9 for F=mm Max. filter number / rotating / gear positioned Filter stage width (mm) Filter size (inch) Connecting diameter (mm) Light weight support for rod ∅ mm * With adaptors also bridge plates 15 und 19 mm

5,2 / 4,5 (s. o.) S16, S35, SD, HD s. o. 2/1/1. 150 / 2. 110 4x4/4x5.65h + 4x4 100 / 110 + 142,5 15 *

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 17

C2 MatteBox – Double Filter Stage 4 x 5.65”/4x4” and 2 housings to combine.

The wide-anglehousing CWAH-1FC with French Flag and 16:9 matte.

The Bellows-Housing for Super 16 and 16:9 formats.

Components Wide Angle Housing, complete as described above Housing with moving matte on bellows Double Filter Stage, rubber bellows 100 mm Double Filter Stage, rubber bellows 110 mm Accessories for Wide Angle Housing CWAH-1FC Pivot mechanism for French Flag 402-26, bottom

Article no. CWAH-1FC CBH-S16 CF-MB/ST CF-MB/ST110

Pivot mechanism for Side Wings (Set of 2) Pair of Side Wings Insert-Ring 100 : 95 mm, for use with one filter only, up to F=4.5 mm Please select support according to camera and light protection or step down ring according to lens. For information on light protection rings and on the various support systems, see the respective overview pages. Spare part selection Multi format filter holder 4x4 / 4x5.65 horizontal Filter holder 4x4 French Flag 39 cm, foldable (for bellows-housing) French Flag 36 cm, foldable (for wide-angle-housing) Pair of Side Wings 16:9 matte (for Wide Angle Housing CWAH-1FC) Rubber Bellows with ring 100 / 110 mm

410-PM104 410-100 410-55

402-01-08

410-31 402-04 410-29 410-26 410-100 416-03 410-13 / 11

System C2, MatteBox for 15mm supports.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 18

C2 SunShade – Double Filter Stage 4 x 5.65”/4x4” and 2 housings to combine. The Double Filter Stage CF-SS/ST As opposed to the CF-MB/ST, has a 104 mm clamp-on connection. For smaller diameters, choose the respective step-down. This version comes with a multi format filter holder (410-31) for 4x4“ and 4x5.65“ filters and for the rotating second stage the filter holder (402-04) for 4x4“ filters. Both filter holders slide vertically and can be fixed in any position, the second also rotates 240º. The already above described housing CWAH-1FC combines 4:3 and 16:9 formats and comes with a 16:9 matte for optimal use which mainly reduces the picture height. The housing CWAH-FV is designed for 16:9 / S16. It can be used for wide angle up to a focal length of 5.2 mm as an economic version. The set comes with the French Flag; Side-Wings and Bottom French Flag are optional. Theoretically, the double filter stage can also be used with the bellows housing. We, however, recommend the described version due to its lower weight.

Technical data of CF-SS/ST combinations: Max. wide angle focus length (2/3“ Chip) F=mm

The Double Filter Stage CF-SS/ST with 104 mm Clamp Adaptor should preferably be used with the light weight CWAH housing.

5,2 / 4,5 (s. o.) S16, S35, SD (1FC), Multi-Format 4:3 and 16:9 16:9 Mattes 4:3 for F=mm Mattes 16:9 for F=mm s. o. Max. filter number / rotating / gear positioned 2/1/Filter stage width (mm) 1. 150 / 2. 110 Filter size (inch) 4x4/4x5.65h + 4x4 Connecting diameter (mm) 104 Support: Clamp adaptor * * Also for use on 15 mm Light Weight Support with Center Adapter or DSW 400 Direct-Swing-Away System

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 19

C2 SunShade – Double Filter Stage 4 x 5.65”/4x4” and 2 housings to combine. Components Housing 16:9 / S16, complete as described above Housing 4:3/16:9, complete as described above Double Filter Stage, clamp connection 104 mm

Article no. CWAH-FV CWAH-1FC CF-SS/ST

Acessories Pivot mechanism for Side Wings (Set of 2, for CWAH-FV) Pivot mechanism for Side Wings (Set of 2, for CWAH-1FC) Pair of Side Wings Pivot mechanism for French Flag 402-26, bottom at CWAH-1FC Pivot mechanism for French Flag 410-29, bottom at CWAH-FV Center Adaptor* DSW® 400, Direct-Swing-Away adaptor with thread mount** DSW® 400, Direct-Swing-Away adaptor with clamp mount **

410-PM 410-PM104 410-100 402-01-08 410-01-08 420-02 401-402K 401-403K

Please select support according to camera and light protection or step down ring according to lens. For information on light protection rings and on the various support systems, see the respective overview pages. CWAH-FV Spare part selection Multi format filter holder 4x4 / 4x5.65 horizontal Filter holder 4x4 French Flag 39 cm, foldable, for CWAH-FV French Flag 36 cm, foldable, for CWAH-1FC Matte 16:9 for CWAH-1FC The Center Adapter or the DSW® 400 Swing Away System connect the CF-SS/ST with 15mm rod ∅ Light weight Supports

410-31 402-04 410-29 402-26 416-03

* for use on Light Weight Support with 15 mm rods. ** for use on Light Weight Support of type 401-400 with 15 mm rods.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 20

SD 411 – SunShade, for two 4x4” Filters up to 5.2 mm focal length. Clamp-on SunShade for lens diameters up to 104 mm. The Double Filter Stage takes 4x4” filters. Both filter holders slide vertically and can be fixed in any position, the second also rotates 160º. The housing is designed for a focal length of 5.2 mm. If used with only the first fixed filter holder and in combination with the special step-down ring 411-31 (104 to 95 mm), shots up to 4.5 mm focal length are possible. The connecting diameter of 104 mm and the respective step-down rings fit many lenses. The set comes with two filter holders, a French Flag and the 16:9 Matte. Side Wings and bottom French Flag are optional. The maximum wide angle focal lengths (F=mm) are: S16=5.5; S35=12; photo35=20; SDTV=4.8.

Technical data: Max. wide angle focus length (2/3“ Chip) F=mm 5,2 (4,5 s. o.) Multi-Format 4:3 and 16:9 S16, S35, SD, HD Mattes 4:3 for F=mm Mattes 16:9 for F=mm Universal Max. filter number / rotating / gear positioned 2/1/Filter stage width (mm) 110 Filter size (inch) 4x4 Connecting diameter (mm) 104 Support: clamp adaptor * * Also for use on 15 mm Light Weight Support with Center Adapter or DSW 400 Direct-Swing-Away System

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 21

SD 411 – SunShade, for two 4x4” Filters up to 5.2 mm focal length. Components SD 411, complete as described above

Artikelnummer 411-50

Accessories Pivot mechanism for Side Wings (Set of 2) Pair of Side Wings Pivot mechanism for French Flag 402-26, bottom Filter holder 4x5.65 vertical

410-PM104 410-100 402-01-08 410-03

Options Center Adaptor* DSW® 400, Direct-Swing-Away adaptor with thread mount** DSW® 400, Direct-Swing-Away adaptor with clamp mount **

420-02 401-402K 401-403K

Please select support according to camera and light protection or step down ring according to lens. For information on light protection rings and on the various support systems, see the respective overview pages. Including 2 Filter holders, French Flag and 16:9 matte.

The Center Adapter connects the SD 411 to all 15 mm Light Weight Supports.

The DSW® 400 Swing-Away System mounts on all Light Weight Supports of the 401-400 Series.

Spare part selection Filter holder 4x4 French Flag 36 cm, foldable Matte 16:9

402-04 402-26 416-03

* for use on Light Weight Support with 15 mm rods. ** for use on Light Weight Support of type 401-400 with 15 mm rods.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 22

SD 421 – SunShade for Cooke S4 Lenses, Double Filter Stage 4x5.65”. Clamp-on Sunshade with 110 mm connection and 4:3 housing for direct fit on all Cooke lenses of the S4 series. The included Double Filter Stage takes filters up to 4x5.65”. Both filters slide vertically and can be moved in any position, the second filter also rotates 250º (80º to the right and 170º to the left). The set comes with 2 multi format filter holders for 4x4” and 4x5.65” filters and the French Flag. Side Wings are optional.

Technical data: 14mm (SD 5.5mm) Max. wide angle focus length (35mm film) 35, S35, SD Format 4:3 Mattes 4:3 for F=mm Mattes 16:9 for F=mm 2/1/Max. filter number / rotatable / gear positioned 150 Filter stage width (mm) 4x4/4x5.65h Filter size (inch) 110 Connecting diameter (mm) Clamp-on * Support system * Also for use on 15 mm Light Weight Support with Center Adapter or DSW 400 Direct-Swing-Away System This clamp-on Sunshade also mounts on other film lenses with the respective step-down rings.

Components:

Center Adaptor 420-02

DSW® 400 Direct-Swing-Away System

SD 421 for Cooke, complete as described above Stage CF-SS/110-31, housing CLWAH-43 fixed Accessories Mounting blocks for pivot mechanism (set of 4) Pivot mechanism for Side Wings (set of 2) Pair of Side Wings Pivot mechanism f. French Flag, bottom of housing CLWAH-43 Spare part selection Multi format Filter holder 4x4 / 4x5.65 horizontal French Flag 36 cm, foldable

Article no. 421-01 410-10-01 410-PM 410-100

410-31 402-26

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 23

Hand grips and their Light-Weight Supports (HD). Safe and convenient support for handheld shooting The special HD Light Weight Supports safely take the handles through the extra ridged rod clamping and base plate. The heavy-duty aluminium rods have 15 mm standard diameter and 205 mm of length. The V-mount is compatible to the camera’s tripod adapter. For stable connection to the tripod and quick and easy change from handheld to tripod use, we suggest our patented QuickLock Plate (s. page 26). The Handgrips are extensible and adjustable in any direction and angle. The set comprises one short grip for the left camera side and a long twice adjustable grip for the right side. The latter is equipped with a start/stop knob for Broadcast cameras when using prime or cine-style lenses. Light-Weight Support (HD)

Set hand grips with mounts to connect to the base plate of the HD LightWeight Supports

A further optional extension for the left grip is available.

Components: Lightweight support (HD) for Panasonic Universal (except for the following) Lightweight support (HD) for Panasonic HPX / HDX series Lightweight support (HD) for Panasonic HDX 500 Lightweight support (HD) for Sony Universal Lightweight support (HD) for Sony HDC-1500 Lightweight support (HD) for Thomson Viper Set with two hand grips, including grip mounts Accessories Grip extension for left grip

Article no. 401-87 401-87A 401-87A5 401-60B 401-601 401-92 403-01 403-01-05

Adapter cable for use with: Canon EB lenses with 8-pin plug Fujinon EB lenses with 12-pin plug Fujinon EB lenses with 8-pin plug P+S Pro35 Image Converter with 3-pin Fisher plug Spare part selection Rod, ∅ 15 mm, length 205 mm for light support (HD) Set of 2 grip mounts

403-C8 403-F12 403-F8 403-F3 401-01-04 403-02

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 24

Lightweight Supports for 2/3” Chip cameras.

Support system for the 15mm standard - for MatteBoxes, lens supports, follow focus devices, fluid-zoom drives, wireless focus receivers and motors. The light-weight supports are equipped with rod holder for height and lateral adjustment. The base plate is made of hardened aluminium. The V-shaped connection on the bottom is compatible with the tripod adapters supplied by the camera manufacturer. The high-strength aluminium rods correspond to the 15 mm standard (rod diameter 15mm, rod centre-to-centre spacing 60 mm) and have a length of 205 mm. The patented QuickLock plate (see Page 25) offers a particularly stable connection to the tripod for quick and easy change between shoulder and tripod. See page 23 for special light-weight supports (HD) to use with hand grips. Components: Lightweight support:

Article no. Sony Universal for Sony BVP-550P Panasonic Universal for JVC GY-HD 250 / 251 (rod length 150mm) for JVC GY-500 / DY-90E for JVC GY-700DV / GY-5000 for Thomson TTV 1657 Ikegami Universal for Ikegami HK 399 for Ikegami types DNS 33 / HDNX 10 among others for BTS LDK 10P / 20P for BTS LDK 100 / 120 / 6000 / 7000

V-connection

Adaptor cable 401-CABLE

Accessories: Rod adapter (notch for cable) Cable with Hirose 12-pin angle plug for Fujinon lens 1 Pair rod extensions 100 mm with thread mount 1 Pair rod extensions 50 mm with thread mount

U-clamp 401-70 Article no. 401-70 401-cable 401-83 401-14

Rods (spare part): Rod ∅ 15 mm, length 205 (standard length) Rod ∅ 15 mm, length114 Rod ∅ 15 mm, length 128 Rod ∅ 15 mm, length 150 Rod ∅ 15 mm, length 205 with notch Rod ∅ 15 mm, length shorter than 205 mm, customized

401-50 401-85 401-89 401-65 401-68 401-69 401-84 401-77 401-80 401-66A 401-88 401-91 401-01-04 401-01-04-114 401-01-04-128 401-01-04-150 401-01-04A 401-01-06

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 25

QuickLock®© tripod adapter and bridge plates. The patented QuickLock tripod adapter plate: for quick and easy, play-free camera connection Suitable for all cameras which are equipped with wedge plate connections (V-mount) in the front and a mounting bracket behind the shoulder support. The Chrosziel QuickLock plate clamps the camera automatically and easily, and even after decades of use, still works perfectly thanks to its patented mechanics: pressure on the wedge plate and traction on the camera‘s mounting bracket. It protects against unintentional opening, but the camera can still be quickly and easily removed in a flowing movement. On the bottom, two slot nuts with a 1/4 and 3/8 inch thread slide over a large area to fix onto a tripod or the bridge plates.

QuickLock, for many cameras – the solid connection to the tripod.

In combination with the bridge plates, adjustment to the centre of gravity on the tripod is very easy. The plates come with 19 mm stainless steel rods (video standard). All accessories for the 15mm light-weight supports fit by means of an adaptor. For video cameras with different optical axes, bridge plates are specially adapted. For the use of film accessories on video cameras, a special version adjusts optical axes. This version is based on 15mm stainless steel rods.

Special version 401-122

Components: QuickLock tripod adapter plate Bridge plate 19mm Video-Standard (rod ∅ 19 mm, rod centre to centre spacing 105 mm) Bridge plate 19mm Video-Standard for Sony HDC 1500 Bridge plate 19mm Video-Standard for Sony F23 / 35 QuickLock kit for Sony F 23 / 35 QuickLock shoulder support kit for Sony F23 / 35 QuickLock adapter kit for RED One For all bridge plates: The various offsets of the optical axes can be compensated for by using the slotted holes. (e.g. Sony left; Thomson centre; Panasonic right).

Bridge plate 19mm for RED One Bridge plate 19mm Video-Standard for SI-2K Bridge plate with integrated QuickLock connection for film accessories on video cameras (rod ∅ 15 mm, rod centre-to-centre spacing 100 mm)

Article no. 401-130 401-121 401-123 401-F235 401-F231 401-F240 401-RED1 401-124 401-SI2K 401-122

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de

Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 26

Bridge Plates / Adaptors

Bridge plate 401-124 for RED One. Also available: QuickLock adaptor 401-RED to mount the camera on the QuickLock plate.

Bridge plate 401-F235 for Sony F23 / F35.

Mini wedge plate 401-140 connects the DV light-weight supports of the 401-400 series with the QuickLock tripod plate.

Bridge plate 401-SI2K for Silicon Imaging SI-2K.

Adaptor 401-10Q quick connector for 19mm rods with centred mounts to 15mm video standard.

QuickLock Adapter Kit 401-F231 for Sony F23 / F35, base plates replaces the original Sony base plates.

Adaptor 401-10 for 19mm rods with centred mounts to 15mm rods

QuickLock shoulder support 401-F240 for Sony F23 / F35, in development.

Adaptor 401-17 for 19mm rods with horizontally and vertically adjustable mounts for 15mm rods

Adaptor 401-12 for 15mm rods with film spacing (401-122) to 15mm video standard.

Adaptor 401-18 for 15mm rods with film spacing (401-122), horizontally and vertically adjustable mounts for 15mm video standard.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de

Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 27

Studio Rig Follow Focus, versions for video and film lenses. For smooth and precise focus moves due to our fluid damping module and gear units and bearings with the lowest tolerances: It allows play and frictionfree focus moves even for permanent direction changes. We abstain from using switchable gear boxes for the sake of play-free preciseness. Instead, we use two gear boxes for the different focus markings of film and video lenses. Film lenses, prime lens and “Cine style” video lenses typically display an adjustable range of 200º from close-up to infinity. The Studio Rig Cine translates the rotation on the hand wheel into a ratio of 1:1 on the lens focus ring. The focus of the video lenses rotate only approx. 100º to 145º between close-up and infinity. For similar operation and preciseness, the Studio Rig Video’s gear unit translates the angle of rotation of the hand wheel into a ratio of 2:1 on the focus ring spreading the adjustment range of the video lenses. For other adjustments, use different gear diameters. All gear drives can be easily mounted without tools. The three modules of the lens manufacturers are available. The Studio Rig basic unit comes with hand wheel 1 with fluid damper, scale ring and focus lever and clamping unit for the 15 mm video standard (see p. 26, with adaptor for 19mm rods). Please select the gear drive according to your lens.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 28

Studio Rig Follow Focus – the versions

Video Single 203-01S

Cine Single 204-01S

Components Studio Rig Video Single (2nd hand wheel not possible) Studio Rig Cine Single (2nd hand wheel not possible) Studio Rig Video Studio Rig Cine System components Hand wheel extension Hand wheel 2 Axle extension Flexible shaft 330 mm Flexible shaft 450 mm Flexible shaft 1000 mm Spare part selection Hand wheel 1 with scale Spare scale Focus lever Drive gears all B=8 mm

Studio Rig Video 203-01

Studio Rig Cine 204-01

Article no. 203-01S 204-01S 203-01 204-01 201-07 201-02 201-30 201-31 201-32 201-33 201-03 201-04 201-18

/ ∅ mm /no. of teeth/mod

Angenieux, Canon, Schneider EB/ENG 35.00 68 0.5 C With offset, mandatory for Canon 35.00 68 0.5 C 20x8 Angenieux, Canon EB/ENG 28.45 55 0.5 V Fujinon EB / ENG 32.50 52 0.6 V Fujinon, Nikon EB / ENG 28.70 46 0.6 V Canon, Fujinon Cine Style HD / SD, 46.30 56 0.8 V 35mm Film Canon, Fujinon, Zeiss fixed focal length; 36.80 44 0.8 V Canon 8-64 Canon, Fujinon, Zeiss Video fixed focal length 25.60 30 0.8 C and Canon, Fujinon Cine Style HD/SD 16 mm fixed focal length; B=16 mm 33.60 40 0.8 C 16 mm Zoom lens; B=23.75 mm 33.60 40 0.8 C Movicam fixed focal lengths 37.00 44 0.8 C V = preferably Studio Rig Video / C= preferably Studio Rig Cine

201-16 201-21 202-16 201-10 201-17 201-23 201-22 201-12 201-05 201-06 201-11

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 29

Fluid zoom drives for movie and video lenses. Adjustable fluid damping for smooth zoom movement. The variations are due to optimal mechanical adjustment to the lenses for highest precision of zoom drives. Some drives directly mount on the lens, others require a support system (light-weight support with 15mm rod ∅). For use on bridge plates with 15 or 19 mm rods, the extensions EU15 and EU19 are available. A short and a long zoom lever come with the basic unit. Components

Version 102-13S2

Version 102-10

Extension 102-19 for zoom lever mounting

Swing-Away clamp 102-14-19

(moves the lever backward to allow movement, if a closely attached follow focus would block it.)

Holder 102-13-01

Fluid for

Canon, Angenieux, Nikon EB/ENG

mod 0.5

Fujinon EB/ENG 0.6 Canon 8-64 / 7-63 / 11.5-138 / 11-165, S16, ( alternative attachment directly on the lens using holder 102-13-01) 0.8 Cooke 9-50 / 10.4-52, DSLR (Canon EOS 5D II, Nikon D90) Canon, Fujinon Cine Style Angenieux 10-120 T2 / 11.5-138 / Cine Style, S16, 0.8 Zeiss Digi Zoom and others with large draw angle Zeiss 10-100 T2 / 11-110, S16 for mounting directly on the 0.8 lens, with zoom lever holder 102-35 Angenieux 17-102 T2 / 25-250, Cooke 20-60 / 20-100 (delivery without zoom lever, Swing-Away clamp 0.8 102-14-19 needed for mounting) Canon 8-64 / 7-63 / 11.5-165, S16. Special design for direct attachment on the lens using an ellipsoidal clamp and 0.8 semi-circular supporting segment for zoom lever. Canon 6.6-66 Accessories EU15 extension, for ∅15 mm rods EU19 extension for ∅19 mm rod to ∅15 mm rod Canon lens holder for fluid zoom drive 102-13 Swing-Away clamp for zoom drive 102-10 Extension for zoom lever mount (for use with narrow follow focus) Spare part selection Zoom lever short Zoom lever long Zoom lever holder for zoom drive 102-01 Ellipsoidal clamp for zoom drive 102-13S Semi-circular supporting segment for zoom drive 102-13S * Lightweight support with 15mm rod∅ required

Article no. 102-15* 102-16* 102-13*

102-11* 102-01 102-10 102-13S 102-13S2 EU15 EU19 102-13-01 102-14-19 102-19 102-09 102-18 102-35 102-13-05 102-13-07

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 30

Lens supports for SD, HD and Cine Style lenses. Components 15 mm Video Standard Lens support for Fujinon EB / ENG and HD Video lens Lens support for Canon EB / ENG lens Lens support for Fujinon Lens support for Canon

Article no. 401-13 401-19

HD Cine-Style lens HD Cine-Style lens HD Video lens HJ11x4.7, HJ21x7.5, HJ21x7.8 among others

401-23 401-24

Lens support for Canon HJ40x10 and HJ40x14 and others Lens support for Fujinon HA25x16.5 and others Lens support for Zeiss Digi Zoom lens Components for 19 mm bridge plates Lens support for Fujinon 36x / 42x lens among others Lens support for Canon 33x lens among others HA12x9.5, HA5x6, HA10x10, HA3x5, Lens support for Fujinon HA15x7.3 lens among others Lens support for Zeiss Digiprime 135 mm lens More types and custom-made products upon request

401-27 401-26 401-30

Lens support for Canon

401-21

401-16F 401-16C 401-25 401-31

Supports for 15 mm rod diameter.

Adaptor 401-17

Supports for 19 mm rod diameter.

Adaptor 401-10

For use of the lens supports with 15 mm clamps and bridge plates with 19 mm rods, we recommend the use of the universal adaptor 401-17. For lens supports with height adjustment, use the fixed adaptor 401-10.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 31

Cine Style viewfinder extensions for Sony HD viewfinder HDVF-C30W / C35W.

ACVF mounted directly on the camera and on the telescopic levelling arm.

Two viewfinder designs for the different types of viewfinders With ACVF System, the Sony HDVF-C30W viewfinder either mounts directly on either side of the camera, or it can be conveniently positioned on a lateral rod when required for the shooting situation. Additionally the system replaces the original Sony eyepiece and the mirror housing. The eyepiece picture is twice as large as the original and has a higher contrast. Eye relief is 30 mm. When using on the lateral rod, a levelling arm and a long monitor cable are required. For the Sony HDVF-C35W viewfinder which came on the market together with the F23, we have developed a HD Cine extension, which also puts this viewfinder on the right or left side of the F23 and F35 cameras. The original eyepiece is replaced by a version which works without a mirror before the monitor. An adaptor clicks eyepiece and monitor together. For the lateral rod, a levelling arm and a long monitor cable are required. Optionally the 16x9 eyepiece shutter “Shut Eye” can be fitted.

Components:

Article no.

530-01 ACVF System for Sony HDVF-C30W 535-01 HD Cine extension for Sony HDVF-C35W Both viewfinder extensions are delivered completely as shown. Not included: Sony monitors, long monitor cable and the levelling arm. Accessories: Viewfinder connection flange, replaces the original part 520-01 of Sony HDW-F900 / 950 / 750 cameras (for ACVF) 520-02 Sony monitor cable, length 730 mm (for C30W) 520-03 Sony monitor cable, long (for C35W) ARRI-LE ARRI levelling arm for lateral rod

HD Cine extension for HDVF-C35W: Eyepiece, Adaptor, lateral rod with mounts for the Sony cameras F23 and F35.

Monitor HDVF-C35W without eyepiece on the lateral rod.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 32

Abakus viewfinder extensions for SD viewfinder monitors

For Sony, Panasonic and Ikegami viewfinders The Abakus viewfinder extension is mounted on the mirror box of the viewfinder instead of the eyepiece using an adaptor. It fits on all viewfinders with a diameter of 2 inch. The extension interfaces with the camera supports via e.g. an ARRI levelling arm and offers the same comfort and ergonomic efficiency as a film camera offers. The eyepiece adjustment is +/- 6 dioptres. The Abakus viewfinder extension offers, in addition to the fixed eyepiece position, a particularly bright picture. The picture has a diameter of 55 mm, the eye relief is 20 mm. Originally developed for use with the Sony camera DVW 700, there are also adaptors for Ikegami and Panasonic cameras.

Components Abakus viewfinder extension

Article no. ABAVF

Accessories Ikegami adapter Panasonic adapter Sony adapter ARRI levelling arm

ABAI ABAP ABAS ARRI-LE

Individual adapters for the viewfinders from Ikegami, Panasonic and Sony.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 33

For 16mm Cine, DV and HDV Camcorder

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 34

MB 450 Product family for DV/HDV Camcorder, with DSW© Direct swing system The 3 MatteBoxes in the 450 series perfectly meet the requirements of shots with compact camcorders. All models fit the 15 mm Lightweight Supports on the basis of the 401-400. The models MB 450, MB 450-DSW© and MB 450-DSWC© come with a double filterstage for 4x5.65” (front stage) and 4x4” filters. All filters can be moved vertically and fixed in all positions, all 4x4” filters are also fully rotating. The MB 450 come ready for shooting with multi-format filterholders 410-04 (for 4x4” and 4x5.65”) and 402-12 (4x4”) for the rear stage, including French Flag and Front Mask**.

MB 450 - the HDV MatteBox. with converter 0.75 usable from F = 3.3mm.

For cameras with interchangeable lenses, The DSWc Direct Swing-Away System offers an unparalleled comfort for quick and easy lens change. For light prevention, choose between fixed rings for each individual lens, or 2 flexible rings for lens diameters from 50 to 85mm, respectively 75 to 98mm. Fixed rings have the advantage to automatically position the lens to the MatteBox.

MB 450 DSW© - for Chrosziel rods with inside thread.

Technical Data: Max. wide-angle focal length (1/3”HD Chip) F=mm Multi-Format 4:3 and 16:9 Mask inserts 4:3 for F=mm Mask inserts 16:9 for F=mm

MB 450 DSWC© with clamp adaptor for all support rods without inside thread.

Max. filter number / rotating Filter stage width (mm) Filter size (inch) Connecting diameter (mm) Support system: DV light-weight supports with rod ∅ mm

4.2, (6.4 XDCAM) SD, HD Universal from F = 4.5 mm 2/1 150 / 110 rear stage 4x5.65 / 4x4 110 15

** Please always use the front mask for a focal length of 4.5 mm or more. It effecitvely increases the image quality as opposed to flaps mounted in front of the lens. Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 35

MB 450 product family for DV / HDV camcorders. Supports and accessories, complete sets: The support 401-400 is the basis on which the camera is fixed on its plate with respect to the optical axis. Light prevention rings connect lens and MBs.

Support system with the base 401-400.

Components: MB 450 MB 450-DSW©, Direct swing system with thread mount MB 450-DSWC©, Direct swing system with clamp mount

MB 450 camera complete sets: Canon XH G1 / A1 Canon XL HD1 / XL-2 Sony HVR-V1 Sony PMW-EX1 / HVR-Z7 Sony PMW-EX3 Sony HDR-FX1 & HVR-Z1 Panasonic HVX-200 / 200 A Light prevention ring.

Flexi ring.

© DSW Direct swing-away system adapter

Panasonic HPX171 / HMC151

JVC GY-HD100 / 101 JVC GY-HD200 / 251 Accessories: Side wings, 1 pair Pivot mechanism for bottom French Flag Foldable French Flag, width 34.5 cm

Article no. 450-02 450-02DSW 450-02DSW/C

450-XHGKIT 450-XLHDKIT 450-V1KIT 450-EX1KIT 450-EX3KIT 450-HDVKIT 450-HVXKIT 450-HMCKIT 450-JVCKIT 450-JVCTPKIT 450-10 450-11-01 450-11

Please select support according to camera, light prevention or step-down ring according to lens.

Complete sets for many cameras! They include the MB 450 with mask, French Flag, filter holder 4x4” and 4x5.65”, pivot mechanisms for side wings, DV light-weight support und light prevention ring adapted to the camera.

The DSW© Swing-Away System is separately available for retrofit 401-402S Assembly set DSW© 400 with thread mount © 401-403S Assembly set DSWC 400 with clamp mount

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 36

Selection Guide - MB 450 Product family

All MB 450 – the new designs fit in the same support system with 15 mm rods as do their previous models. All MatteBoxes MB:

450-01 450-02 450R1 450R2 450R3 450R2-DSW© 450R3-DSW© 450R2-DSWC© 450R3-DSWC©

Camera Type

Light prevention ring Art.No. | ∅:∅mm

Support Art. No.

Canon XH G1 / A1 Canon XL HD1 / XL-2 Sony HVR-V1 Sony PMW-EX1 Sony PMW-EX3 Sony HDR-FX1 & HVR-Z1 Sony HVR-Z5 Sony HVR-Z7 Panasonic HVX-200 / 200A Panasonic HPX170/171/HMC150/151 JVC GY-HD100 / 101 JVC GY-HD200 / 251 DSLR (Canon EOS 5D / Nikon D90)

450-15 | 110:81 450-15 | 110:81 450-15 | 110:81 410-39 | 110:85 410-39 | 110:85 450-15 | 110:81 411-72 |110:M72 410-39 | 110:85 450-16A | 110:91 411-72 |110:M72 410-39 | 110:85 410-39 | 110:85* Depending on lens

401-419 401-411 401-418 401-417 401-415 401-417 401-420 401-417 401-415 401-420 401-413 401-65 401-421

Gear ring for the lens / Drive wheel f. the focus pull device DV Studio Rig and HDV Rig VariLock Art. No./Art. No. |mod| Drive wheel ∅ mm -------- / 206-15 | 0.5 | 38,0 206-23 / 206-12 | 0.8 | 36,8 206-25 / 206-14 | 0.8 | 20,8 206-24 / 206-12 | 0.8 | 36,8 206-24 / 206-12 | 0.8 | 36,8 206-22 / 206-14 | 0.8 | 20,8 new 206-27 / 206-12 | 0.8 | 36,8 206-24 / 206-12 | 0.8 | 36,8 206-28 / 206-12 | 0.8 | 36.8 -------- / 206-16 | 0.6 | 38,0 -------- / 206-16 | 0.6 | 38,0 new

* Suitable for Fujinon 16x5.5;13x3.5 and wide angle attachment WCV-82SC

For wide angle attachments and exchangeable prime lenses.

Flexi-Rings 450-20 | 110:75-98 450-22 | 110:50-85

For all wide angle attachments, MB 450R1 Single-Rotating Filter Stage, multiformat filterholder for 4x5.65“ and 4x4“ (410-04), French Flag (450-12). Option: Holder for side wings and side wings (a pair each, 450-10PM)

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 37

Selection Guide - CMB SunShade Product family

All SunShades based on the MB 450 housing - the CMB models as well as their predecessors – fit in the same clamp system with the 110 mm connection. The 4x4 SunShade has a clamp mount for 104mm diameter; the SunShade 1000 is designed for 3x3” filters and clamps onto lenses with a maximum diameter of 85mm.

Camera Type Canon XH G1 / A1 // XL HD1 / XL-2 Sony HDR-FX1 / HVR-Z1 / HVR-Z5 / HVR-Z7 Sony HVR-V1 Sony PMW-EX1 / EX3 Panasonic HVX-200 / 200A Panasonic HPX170/171 / HMC150/151 JVC GY-HD100 / 101 / 200 / 251

For wide-angle attachments: Canon wide-angle attachment WD-H72*

Step-down ∅ 110 CMB-R10, CMB-R20, SD 455-R1 Art.-No. | ∅:∅mm 411-72* | 110:M72 411-72 411-39 411-77 411-82 411-72 411-82

| 110:M72 | 110: 80 | 110:M77 | 110:M82 | 110:M72 | 110:M82

455-A109 | 110:109 411-48 | 110:105 411-46 | 110:100 411-44 | 110: 98 411-42 | 110: 96

Adaptor ring ∅ 104 for SD 440 Art.-No. | ∅:∅mm 411-14 | 104:M72

Adaptor ring ∅ 85 for SD 1000 Art.-No. | ∅:∅mm S1001-85 | 85:M72

411-14 | 104:M72 411-15 | 104:M62 411-09 | 104:M77 411-13 | 104:M82 411-14 | 104:M72 411-23F | 104:M82

S1001-85 | S1001-82 | S1001-85 | S1001-82 |

411-12 | 104:105 411-30 | 104:100 411-29 | 104: 98 411-34 | 104: 97 411-33 | 104: 95 * For Canon wide-angle attachments WD-H72, use the flexible step-down ring 455-A109 mm

85:M72

85:M82 85:M72 85:M82

-

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 38

CMB Product family – SunShade CMB-R10 and CMB-R20 for HDV.

The CMB-R10 is a SunShade with a rotating single filter stage, designed for 4x4” filters. All filter positions for all lenses and all current wide-angle converters are possible without vignetting. The CMB-R20 is equipped with a double rotating stage for 4x4” filters. When used with wide-angle converters, only the rear filter holder rotates (wide-angle converter for 1/3” F=3.3 mm / ½” F=5mm). Both filters can be positioned unrestrictedly up to 4.2 mm focal length (1/3”); respectively up to 6.2 mm focal length for the ½” XDCAM lenses. The connecting diameter of 110 mm takes all currently used wide-angle converters. The SunShade clamps on standard lenses with a step-down ring or is fixed with a screw-in ring.

Technical Data: Max. wide-angle focal length (1/3“/ 1/2” Chip) F= mm Multi-Format 4:3 and 16:9 Mask inserts 16:9 for F= mm (1/3” / 1/2“) Max. filter number / rotating Filter stage width (mm) Filter size (inch) Connecting diameter (mm) Support system: CMB-R10, single rotating stage – CMB-R20, double rotating stage for 4x4 size filters.

The DSW© 400 Swing-away system Connects the CMB SunShades with the DV light-weight supports.

R10: 3.3 / 5 | R20: 4.2 / 6.2 S16, SD, HD Universal from 4.5 / 7 R10: 1 / 1 | R20: 2 / 2 110 4x4 110 clamp mount

Components SunShade CMB-R10, complete with two filter holders and French Flag SunShade CMB-R20, complete with two filter holders and French Flag Options French Flag 35 cm, foldable Mask 16:9 from f = 4.5 mm DSW 400, Direct swing adapter with thread mount** DSW 400, Direct swing adapter with clamp mount** Spare part selection Filter holder 4x4 French Flag 35 cm, continuous For information on clamp rings, see page 37, and the respective overview pages.

Article no. CMB-R10 CMB-R20 450-11 450-MA 401-402S 401-403S 402-12 450-12

** for use as MatteBox on 15mm light-weight supports, incl. mounting screws

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 39

SD 440 SunShade with 4x4” double-filter stage. At only 421 gr., this universal SunShade is a super lightweight, and, with its two 4x4” filter holders and the especially large French Flag ready for shooting. Two “packages” are available, 440-02 with the standard filter holder (see ill.). For cameras with interfering microphone or hand grip, the model 440-03 has filter holders with a short shaft that can be positioned from below. The first filter slides horizontally; the second also rotates 170°. The clamp mount takes lenses with a maximum diameter of 104 mm. Step-down rings as well as adaptor rings with thread mounts for the lens filter thread are also available.

Technical Data: Max. wide-angle focal length (1/3“/ 1/2”Chip / 16mm / S16mm) F= mm Multi-Format 16, S16, 4:3 and 16:9 Max. filter number / rotating Filter stage width (mm) Filter size (inch) Connecting diameter (mm) support system:

Above, an adapter ring with filter thread. Below, the step-down ring 411-23 - 104:85mm.

3.9 / 6 / 8.3 / 10 16, S16, SD, HD 2/1 110 4x4 104 clamp mount

Components

Article no.

SunShade SD 440, complete as described and pictured above

440-02

SunShade SD 440, complete with short filter holder used from below

440-03

Accessories Centre adapter** for SD 440

420-02 411-23

Step-down ring ∅ 104 to 85 mm

Please select the light prevention or step-down ring corresponding to the lens. For information on light prevention rings and on the different support systems, see the respective overview pages.

Spare part selection The Center Adapter connects the 440 with the light-weight supports.

4x4 Filter holder for 440-02 / for 440-03

402-04 / 402-12

French Flag 26,5 cm

402-28

** For use as supported MatteBox on 15mm light-weight supports.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 40

SD 1000 SunShade with 3x3” double filter-stage. This smallest of the SunShade line is suitable for normal focal lengths up to a slight wide-angle especially with SD and 16mm film. The first filter slides horizontally, the second also rotates 170°. The basic version includes two 3x3” filter holders. The S1001-CB package already comes with an adapter for use on 15 mm light-weight supports (see ill.). The clamp mount takes a lens with a maximum diameter of 85 mm. Step-down rings and adapter rings with thread mounts for the lens filter thread are available, as well as a French Flag as accessory.

Technical Data: Max. wide-angle focal length 1/3” HD / 16mm / 2/3”SD ½” XDCAM / S16 Format 16mm, SD, 4:3 Max. filter number / rotating Filter stage width (mm) Filter size (inch) Connecting diameter (mm) Support system:

Adapter ring with filter thread, please see overview pages.

S1001-CB: The center adapter for connection light-weight supports. French Flag as option

7 mm 12 / 18 mm 16, SD 2/1 85 3x3 85 clamp mount

Components Article no. SunShade SD 1000, complete as described above S1001 SunShade SD 1000, complete with adapter for 15mm light-weight supports S1001-CB Accessories French Flag 22cm, incl. pivot rod S1001-FF Centre adaptor* as kit for retrofit S1001-CB-01 3x4 filter holder, vertical S1001-34 Please select the adapter ring corresponding to the lens. For information on light prevention rings and the different support systems, see the respective overview pages. Spare part selection 3x3 filter holder S1001-33 French Flag 22cm / pivot rod separately S1001-FF-01 / -02

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 41 The following overview helps comparing the video, film as well as photo formats with regard to the horizontal angle of field of the different focal lengths. In particular, it makes the maximum possible wide-angle which is a part of the technical specifications for MatteBoxes and SunShades more transparent.

Overview - Formats and focal lengths in comparison. Formats: Picture (height x width mm) bold = References input

Equivalent focal lengths (mm) of the different video, film and 35mm photo formats which create a picture with the same horizontal angle of field.

Chrosziel Format Specifications:

1/3" HD 2.94x5.23 2 2.3 2.6 3.15 3.30 3.9 4 4.2 4.4 4.5 8.8 5.3 6.1 7 9 11 14 19 22 30 40 HDV MB 450 xx / CMB R10/20 / SD 440 / SD 1000

1/2" XDCAM HD 3.92x6.97 3.0 3.6 4.0 4.7 5 6.0 6.2 6.4 7.0 7 7.7 8.4 9.8 11.4 14.0 17.5 22.7 27.4 35.0 47.0 63.0

2/3" HD 5.4x9.6 3.9 4.5 5.2 6.3 6.6 7.8 8.0 8.4 8.8 9.0

2/3" SD 6.6x8.8 3.6 4.1 4.8 5.8 6.4 7.2 7.3 7.7 8.0 8.2

16mm 7.5x10.4 4.1 4.8 5.5 6.7 7.4 8.3 8.5 8.9 9.3 9.5

S 16 7.5x12.4 5.1 5.9 6.8 8.2 9 10.2 10.4 11.0 11.5 11.7

9.7 10.6 12.3 14.1 17.6 22.0 28.6 37.5 44.0 59.5 79.3 Video all others MB, SD

8.9 9.7 11.3 12.9 16.2 20.2 26.3 34.4 40.4 54.5 72.8

10.2 11.2 13.0 14.9 18.8 23.3 30.3 39.7 46.7 63.0 84.0

12.6 13.8 16.0 18.4 23.0 28.7 37.3 48.8 57.4 77.5 103.4

35mm Film Academy 16x22 8.9 10.2 11.8 14.3 16 17.7 18.1 19.0 20 20.4 22 24 28 32 40 50 65 85 100 135 180 Movie and Digi-Cine MB 602

35mm KB 24x36 14.6 16.9 19.5 24 26 29.3 30.0 31 33 34

Angle of Field (°) 101 93 85 74 72 63 62 59 57 56

36 40 46 53 66 83 108 141 165 223 298

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.

52 48 42 37 30 24 19 14 12 9 7


Product catalogue 2008 Page 42

DV Studio Rig – follow focus for the compact camcorders. The follow focus device for DV and HDV camcorders is compact, light and fits on the 15mm Lightweight Supports. The scale is easy to change and can also be read by the camera operator. The reference marking can be adjusted for the operator or the assistants. Gear drives and gear rings for the different lenses ensure precise adjustments and optimal use of the lens’ adjustable angle. Lenses with built-in gear rings can of course also be focused.

DV Studio Rig, follow focus device with fixed hand wheel. Please order the respective gear drive and, if required, the gear ring for the lens.

Studio Rig Photo, follow focus device with reverse gear for photo lens.

Components DV Studio Rig*, as shown Studio Rig Photo*, as shown incl. reverse gear drive Accessories Focus lever Flexible shaft 330 mm Flexible shaft 450 mm Flexible shaft 1000 mm Scale for DV Studio Rig / HDV Rig VariLock Gear drive for lens: mod ∅ mm Leica, Canon, Fujinon Cine Style 0.8 36.8 Digi Prime, film lens 0.8 46 For Sony lens toothed ring 206-22 0.8 20.8 Canon, Angenieux 0.5 38 Fujinon 0.6 38

teeth 44 56 24 76 62

206-12 206-13 206-14 206-15 206-16

Lens gear ring for: Canon EF 24-105 1:4 IS USM (f. EOS5D) focus Leica 4.5-45mm on the Panasonic DVX-100 Sony PD-150 (protected) Sony HDR-FX1, HVR-Z1 Canon XL Series Panasonic HVX-200, Sony PMW-EX1 / EX3 (protected) Sony HVR-V1 Canon wide-angle zoom 6X, with gear drive 206-12 Sony HVR-Z7 Panasonic HPX171 / HMC150 Series Canon EF 24-105 1:4 IS USM (f. EOS5D) zoom

mod 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

201-19 206-20 206-21 206-22 206-23 206-24 206-25 206-26 206-27 206-28 206-785

82 tbd 76.3 91.5 97.6 95 82.3 tbd 93.3 92.8 78.5

Article no. 206-01S 206-40S 201-18 201-31 201-32 201-33 205-02

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 43

HDV Rig VariLock©®: precise focus control with autofocus. HDV Rig VariLock®: For precise repeatability of focus settings for cameras with Autofocus or electronic focus control. There are two problems for manual focus control of these cameras: 1- avoid the loss of reference points especially at the borders of the settable focus range, infinity and macro, to achieve repeatable setting 2- manage the variation of ranges, because the range – and the resulting rotation angle – varies depending on focal length setting of the built-in zoom lens. The VariLock® feature of the HDV Rig now allows both, since the range of rotation is fully variable for any selectable limit. From a fixed starting point which is set with the Autofocus, the second focus position is set manually and marked by a stopper.

Components

Article no.

HDV Rig VariLock *, as shown without gear drive

206-50S

®

®

HDV Rig VariLock

hand wheel to exchange with DV Studio Rig

Accessories, gear drives and lens gear rings See Page 42 – DV Studio Rig

206-50

The maximum rotation angle is 320°. This range covers most applications of cameras with electronic focus control. In addition, the camera operator himself can precisely control and reproduce the focus settings even without an assistant. Both stoppers are covered with soft rubber for silent operation.

* For use on 15mm light-weight supports. HDV Rig VariLock® protected by DE 202007001639 and international registration. VariLock® is a registered trademark of Chrosziel GmbH. Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 44

DV Balancer® – A new type of shoulder support The DV Balancer® comfortably places camcorders with built-in viewfinders in front of the eye leaving the hands free for camera control. Shoulder support for cameras up to 4 kg, adjusts vertically and horizontally allowing the user to view the viewfinder eyepiece. The weight of the camera will be absorbed by the shoulder pad and the chest rest leaving the hands free to control the camera. The camera attachment allows a direct “docking” on all Chrosziel light-weight supports in the 401- 4xx series. For transporting, the chest rest and shoulder unit are separated. The so-

called “Memory Clip” stores the individual immediate re-installation after unpacking.

adjustment,

for

DV Balancer® compact for transport ®

Components DV Balancer® *, as shown DV Balancer®ENG*, with straight shoulder pad alignment for cameras with ENG-viewfinder on the side, such as Sony PMW-EX3

DV Balancer® Memory Clip stores the setting.

DV Balancer® for direct “docking” on all Chrosziel light-weight supports in the 401- 4xx series.

Accessories DV Balancer® Camera Adapter DV Balancer® Battery holder DV Balancer® tripod clamp (for battery holder) DV Balancer Belly Rest

Article no. 3000 3010

3100 3200 3220 S3316018

* For use on 15mm DV Lightweight supports. DV Balancer® Design and functionality are protected by DE 202007005393 and international registration. Balancer® is a registered trademark of Chrosziel GmbH. Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 45

DV Balancer® – A new type of shoulder support. The accessories

The Lightweight supports in the 4014xx series are tripod adapters, support for the MatteBoxes and focus control devices and, at the same time, connection ® to the DV Balancer . In addition to the Chest Rest, a Belly Rest is available, Standard with Balancer®ENG. Art. No. S3316018. ®

Use the Ballancer Camera adapter Art. No. 3100 for cameras without supports

Battery Holder (Art. No. 3200) with a universal adapter plate with holes and threads for Anton/Bauer Gold Mount, IDX V-Plate and PAG Lok battery systems. In the illustration with PAG Lok.

The Tripod Clamp (Art. No. 3220) is also available for use ® of the DV Balancer battery holders on tripods with parallel-rod legs and rod diameters between 16 - 36 mm.

DV Balancer® Design and functionality are protected by DE 202007005393 and international registration. Balancer® is a registered trademark of Chrosziel GmbH. Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 46

Overview – Light prevention rings for the MatteBox Insert rings for rubber bellows with Ø 100mm (410-13) connection on MatteBoxes: MB C2 (CF-MB/ST), MB 415 (415-02F100) Insert ring Ø 100:62 mm Insert ring Ø 100:65 mm Insert ring Ø 100:70 mm Insert ring Ø 100:75 mm Insert ring Ø 100:80 mm - for Film Insert ring Ø 100:80 mm - for Video Insert ring Ø 100:83 mm Insert ring Ø 100:85 mm Insert ring Ø 100:86 mm

Typical insert ring with overlap rim for the immersing lens.

Typical adaptor to place on lens.

Insert ring Ø 100:87 mm Insert ring Ø 100:90 mm Insert ring Ø 100:92 mm Insert ring Ø 100:94 mm Insert ring Ø 100:95 mm Insert ring Ø 100:95 mm - for zoom lenses with f > 5mm Insert ring Ø 100:98 mm Insert rings for rubber bellows with Ø 110mm (410-11) connection on MatteBoxes: MB 415 (415-02F110), Series MB 450 (450-02/R2/R3 + DSW) Adapter Ø 110:81 mm Insert ring Ø 110:80 mm Insert ring Ø 110:85 mm - not for Fujinon HA10x5, see rubber bellows 410-47 Insert ring Ø 110:86 mm Insert ring Ø 110:90 mm Adapter Ø 110:91 mm Adapter Ø 110:91 mm - short shaft Insert ring Ø 110:95 mm - for zoom lenses with f > 5mm Insert ring Ø 110:95 mm - CWAH-1FC with CF-MB/ST110 for 1 FH use Insert ring Ø 110:96 mm

Article no. 410-27 410-23 410-26 410-22 410-17F 410-17V 410-16 410-19 410-28 410-15 410-18 410-25 410-21 410-14 410-55 410-20

450-15 410-80F 410-39 410-40 410-45 450-16 450-16A 410-41 410-56 410-42

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 47

Overview - Light prevention rings for the MatteBox

Flexi-Insert rings With 110 mm connection for lens diameters from 50 to 98 mm.

Rubber bellows with Ø 142.5mm connection for four lens diameters.

Insert rings for rubber bellows with Ø 110mm (410-11) connection: on Matte boxes: MB 415 (415-02F110), Series MB 450 (450-02/R2/R3 + DSW) Insert ring Ø 110:98 mm Insert ring Ø 110:100 mm Insert ring Ø 110:105 mm Flexi-Insert ring Ø 110:75 to 98 mm - for lens of Ø 75 mm to Ø 98 mm Flexi-Insert ring Ø 110:50 to 85 mm - for lens of Ø 50 mm to Ø 85 mm Rubber bellows for MatteBoxes with Ø 142.5 mm connection: MB 602, MB 840, MB 805, MB 415 (all versions) MB C2 (CF-MB/ST) Rubber bellows Ø 142.5:100 mm Rubber bellows Ø 142.5:110 mm Rubber bellows Ø 142.5:85 mm - for Fujinon HA10x5

Article no. 410-44 410-46 410-48 450-20 450-22

410-13 410-11 410-47

Rubber bellows Ø 142.5:95 mm - for lens with moulded wide-angle front element Insert ring Ø 100 mm for rubber bellows – Spare part, included in 410-13 Insert ring Ø 110 mm for rubber bellows - Spare part, included in 410-11 Insert ring Ø 95 mm for rubber bellows Spare part, included in 410-14F Insert ring Ø 85 mm for rubber bellows - Spare part, included in 410-47

410-14F 410-13-01 410-11-01 410-14F-01 410-47-01

Retaining rings for MatteBoxes with Ø 142.5 mm connection: MB 602, MB 840, MB 805 Retaining ring Ø 142.5:114 mm Retaining ring Ø 142.5:117 mm Retaining ring Ø 142.5:120 mm Retaining ring Ø 142.5:121 mm Retaining ring Ø 142.5:128 mm Retaining ring Ø 142.5:130 mm Retaining ring Ø 142.5:135 mm Retaining ring Ø 142.5:136 mm Retaining ring Ø 142.5:132 mm Intermediate ring Ø 165:142.5mm for MB 602 for use with retaining rings with Ø 142.5mm connection. (Included in the delivery of the MB 602.)

410-12A 410-52 410-50 410-57 410-53 410-49 410-54 410-58 410-51 610-14

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 48

Overview – Light prevention clamping rings for the SunShade

Typical Adapter ring with screw thread.

Typical Step-down ring.

Step-down rings for connection to the clamp adapter with Ø 104 mm f. SunShade: SD 412 (412-02F), SD C2 (CF-SS/ST), SD 411, SD 440 (440-02/03) Adapter ring Ø 104:M 72mm – screw thread on lens Adapter ring Ø 104:M 72mm – long version, e.g. for Sony HVR-S270 Adapter ring Ø 104:M 77mm – screw thread on lens Adapter ring Ø 104:M 82mm - screw thread on lens Adapter ring Ø 104:M 82mm - for screw thread on lens for Fujinon 2/3” Adapter ring Ø 104:M 62mm Step-down ring Ø 104:75mm Step-down ring Ø 104:80 mm Step-down ring Ø 104:83 mm Step-down ring Ø 104:85 mm Possible use of the adapter rings S1001 Ø 85:M xx mm Step-down ring Ø 104:86 mm Step-down ring Ø 104:87 mm Step-down ring Ø 104:90 mm Step-down ring Ø 104:92 mm Step-down ring Ø 104:94 mm Step-down ring Ø 104:95 mm - for lens with moulded wide-angle front element Step-down ring Ø 104:95 mm Step-down ring Ø 104:95 mm - CWAH-1FC with CF-SS/ST for use with 1 filter holder Step-down ring Ø 104:95 mm - 411-50/-53 for 1 FH use Step-down ring Ø 104:97 mm Step-down ring Ø 104:98 mm Step-down ring Ø 104:100 mm Intermediate ring Ø 104:100mm When converting SD to MB for use with the insert rings Ø 100:xx mm Intermediate ring Ø 104:105mm

Article no. 411-14 411-14A 411-09 411-13 411-23F 411-15 411-32 411-21 411-22 411-23 411-24 411-25 411-26 411-16 411-27 411-28F 411-28 411-33 411-31 411-34 411-29 411-30 420-03 411-12

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München Telefon 089 90 10 91 0 Telefax 089 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de

Geschäftsführer: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For unsere Lieferungen und Leistungen gelten ausschließlich unsere Allgemeinen Geschäftsbedingungen.


Product catalogue 2008 Page 49

Overview - Light prevention clamping rings for the SunShade Step-down rings for connection to the clamp adapter with Ø 110 mm for SunShade: CMB-R10, CMB-R20, SD 412 (412-02F110) Adapter ring Ø 110:109 mm (flexible) - for Canon wide-angle converter WD-H72 Step-down ring Ø 110:100 mm Step-down ring Ø 110:104 mm - for connection of the adapter rings from Ø 104:M xx mm Step-down ring Ø 110:105 mm Step-down ring Ø 110:80 mm Step-down ring Ø 110:85 mm Step-down ring Ø 110:86 mm Step-down ring Ø 110:90 mm Step-down ring Ø 110:95 mm

Flexible adapter ring 110:109 mm for Canon wide-angle converter WD-H72

Step-down ring Ø 110:95 mm - SD C2 (CWAH-1FC with CF-SS/110) for 1 filter holder use Step-down ring Ø 110:96 mm Step-down ring Ø 110:98 mm Step-down ring Ø 110:98 mm - with recess for wide-angle converter Adapter ring Ø 110:M 72 mm - screw thread on lens Adapter ring Ø 110:M 77 mm - screw thread on lens Adapter ring Ø 110:M 82 mm - screw thread on lens Step-down rings for connection to the clamp adapter with Ø 130 mm for SunShade: SD 840, SD 412 (412-02F130) Step-down ring Ø 130:105mm Step-down ring Ø 130:110mm Intermediate ring Ø 130:110mm - for connection of the step-down rings from Ø 110:xx mm Step-down ring Ø 130:114mm Step-down ring Ø 130:117mm Step-down ring Ø 130:120mm Step-down ring Ø 130:128mm

Step-down rings 110:104 mm or 130:110 fo rings with the next smaller end diameter.

Step-down ring Ø 130:95mm Step-down ring Ø 130:98mm Intermediate ring Ø 130:132mm

Article no. 455-A109 411-46 411-49 411-48 411-39 411-43 411-40 411-47 411-41 411-45 411-42 411-44 411-44W 411-72 411-77 411-82 411-64 411-59B 411-60 411-65 411-56 411-55 411-57 411-61 411-63 411-58

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 50

Overview - Light prevention clamping rings for the SunShade

Step-down rings for connection to the clamp adapter with Ø 85 mm for SunShade SD 1000 Adapter ring Ø 85:M 58mm - screw thread on lens, conical Adapter ring Ø 85:M 58mm - screw thread on lens - flat Adapter ring Ø 85:M 82mm Adapter ring Ø 85:M 72mm - specially for Canon XL1 aluminium, screw-in mount Adapter ring Ø 85:M 72mm - screw thread on lens Adapter ring Ø 85:M 72mm - screw thread on lens, to combine with 420-04 Adapter with exterior and interior thread: Adapter ring Ø M 58:M 52 mm - 58mm screw thread on lens, Heliopan 452 Adapter ring Ø M 52:M 58 mm - 52mm screw thread on lens, Heliopan 182 Adapter ring Ø M 37:M 58 mm - 37mm screw thread on lens, Heliopan 789 Adapter ring Ø M 77:M 82 mm - 77mm screw thread on lens, Heliopan 130 Adapter ring Ø M 52:75.5 mm - 52mm - screw thread on lens, For combining with S1001-75

Shape of ring is either conical or cylindrical, according to lens and application.

Step-down ring Ø 85:62.5 mm Insert ring Ø 85:65mm - for JVC in combination with light-weight support Step-down ring Ø 85:65 mm Step-down ring Ø 85:75.5 mm Step-down ring Ø 85:75 mm Step-down ring Ø 85:79 mm Step-down ring Ø 85:79.5 mm Step-down ring Ø 85:80 mm

Article no. S1001-58A S1001-58SR S1001-82 S1001-85 S1001-72 S1001-73 S1001-HP S1001-HP1 S1001-HP3 S1001-HP77 S1001-01S S1001-62 S1001-65 S1001-65S S1001-75 S1001-75C S1001-79 S1001-79.5 S1001-80

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 51

Overview - Filter holder

Insert Filterholder 410-05.

Filterholder 410-38 for round filters on a 150mm stage.

Filter holder for stages with a width of 85mm Filter holder 3x3 (for S1001 SunShade) Filter holder 3x4 (for S1001 SunShade) Filter holder for stages with a width of 110mm Filter holder 3x3 – shaded on four sides Filter holder 3x4 - vertical, shaded on both sides Filter holder 4x4 Filter holder 4x4 - with short shaft Filter holder 4x5 - vertical Filter holder 4x6 - vertical Filter holder 4x5.650 - vertical Filter holder 4 1/2 round, 2 parts, f. use within 138mm compartm. of rubber bellows Filter holder for stages with A width of 150mm Filter holder 4x4 - shaded on both sides Filter holder 4x5 - shaded on both sides , vertical Filter holder 4x6 - shaded on both sides , vertical Filter holder 4x4 and 4x5.650 Multiformat - horizontal Filter holder 4x4 and 4x5.650 Multiformat - with short shaft, horizontal Filter holder 4x5.650 - shaded on both sides , vertical Filter holder 5x5 and 4x5.650 Multiformat - horizontal Filter holder 5x5 and 4x5.650 Multiformat - vertical and horizontal Filter holder 5.650x5.650 and 4x5.650 Multiformat - vertical Filter holder 5.650x5.650 Filter holder 5x6 - shaded on both sides , vertical Filter holder round Ø 138mm Insert Filterholder, 360° rotatable for a filter with a width of 110mm and a Ø 138mm round filter Filter holder for stages with a width of 177mm Filter holder 6.6x6.6 Filter holder 6.6x6.6 - with gear wheel guide Insert filter holder for FH 610-01/-02 Multiformat 4x4 and 4x5.650 horizontal Insert filter holder for FH 610-01/-02 5x6 horizontal Insert filter holder for FH 610-01/-02 5.650x5.650

Article no. S1001-33 S1001-34 402-02 402-03 402-04 402-12 402-08 402-06 410-03 410-09 410-33 410-37 410-36 410-31 410-04 410-35 510-01 410-32 510-05 510-03 510-02 410-38 410-05 610-01 610-02 610-01-45 610-01-56 610-01-565

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 52

Overview – Standard accessories.

At one glance: All French Flags, side wings and their mounts…

… and all mattes

French Flags French Flag 22cm, end-to-end for SD 1001 French Flag 36cm, foldable for CLWAH-43, CWAH-1FC, SD 411, SD 421 French Flag 26.5cm, foldable for SD 440 French Flag 39cm, foldable for CWAH-FV, MB 415, SD 412, CBH-S16 French Flag 46cm, foldable for MB/SD 840, MB 805 French Flag 34.5cm, foldable for MB 450 French Flag 35cm, end-to-end for CMB-R10, CMB-R20 French Flag 54cm, foldable for MB 602 Pivot mechanisms to mount a bottom French Flag Pivot mechanism complete, length 162cm for SD 411-50, CWAH-1FC Pivot mechanism complete , length 197cm for CWAH-FV Pivot mechanism complete , length 203cm for MB/SD 840, MB 805, MB 415, SD 412 Side wings and holder for side wings Side wings, Pair for MB 450 Side wings, Pair for SD 411, CWAH-1FC, CWAH-FV, CBH-S16 Side wings, Pair extra large for MB 840, MB 415, MB 805, SD 412 Side wings, Pair for MB 602 Pivot mechanism for side wings, length 93cm for CWAH-FV, CBH-S16, MB 602 Pivot mechanism for side wings, length 104cm for SD 411, CWAH-1FC Pivot mechanism for side wings, length 116cm for MB 840, MB 415, MB 805, SD 412 Mattes Matte for MB 450, CMB-R10, CMB-R20 Matte for SD 411, CWAH-1FC Matte set 16:9 (5 pieces) for MB/SD 840, MB 805, MB 415, SD 412 Matte set 4:3 (5 pieces) for MB/SD 840, MB 805, MB 415, SD 412 Matte set (4 pieces) for MB 602 Rod holders for light-weight supports rod Ø 15mm Centre adapter for SunShades (not CMB Series) DSW 400 Direct swing adapter with thread mount for MB 450, CMB DSW 400 Direct swing adapter with thread mount for SD DSW 400 Direct swing adapter with clamp mount for MB 450, CMB DSW 400 Direct swing adapter with clamp mount for SD

Article no. S1001-FF-01 402-26 402-28 410-29 410-30 450-11 450-12 610-09 402-01-08 410-01-08 410-02-08 450-10 410-100 410-200 610-10 410-PM 410-PM104 410-PM116 450-MA 416-03 410-MA169 410-MA43 610-MA 420-02 401-402S 401-402K 401-403S 401-403K

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 53

Overview – Video Lenses: Fujinon Please note:

* these lenses are “cine style” versions with mod 0.8 / Yellow-highlighted lenses require either Fujinon original or Chrosziel lens support 401-25 Fujinon 2/3” SD

Exterior Ø

Fujinon 1/2” SD

Exterior Ø

A8.5x5.5 A10x4.8 A10x4.8 B-M0*

100 mm 95 mm 95 mm

S8.5x4.2 S10x3.5 S12x5

100 mm 95mm 85 mm

HAe3x5 B-10* HA5x6 B-10* HA10x5

A12x6.8

100 mm

S13x4.6

85 mm

HA10x5 B-10*

A13x4.5 A13x6.3 A14x8 A14x8.5 A14x9 A15x8 A16x9 A16x9.5 A17x9 A17x7.8 A19x8.7 A18x8.5 A18x7.6 A20x8 A20x8.6 A22x7.8 A22x12.5 A24x11.5 A24x16.5 A36x10.5 A36x14.5 A42x9.7 A42x13.5

95 85 100 80 80 85 80 80 85 85 85 90 85 100 85 100 110 110 110 130 130 130 130

S14x6.2 S14x6.4 S14x6.6 S14x7.3 S15x6.1 S16x6.7 S16x7 S16x7.3 S17x6.6 S18x6.4 S18x6.6 S19x6.5 S20x6.4 S22x5.8

100 mm 80 mm 80 mm 65mm 85 mm 80 mm 80 mm 65mm 85 mm 100 mm 100 mm 85 mm 85 mm 100 mm

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Fujinon 2/3” HD

HA10x5.2 HAe10x10 B-10* HAe12x9.5 B-10* ZA12x4.5 HA13x4.5 HA13x4.5 B-10* HAc15x7.3 B-10* HA15x8 HA14x8 HA16x6.3 XA17x7.6 HA17x7.8 HA18x7.6 HAc18x7.6 B-10* HA20x7.5 HA20x7.8 HA21x7.8 HA22x7.3 ZA22x7.6 HA22x7.8 HA23x7.6 HA25x11.5 HA25x16.5

Exterior Ø 128 mm 128 mm 85 mm 85 mm 95 128 156 95 95 95 110 100 96 95 85 85 85 85 110 110 85 110 100 100 100 110 110

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Fujinon2/3" HD HA36x10.5 HA42x9.7 HA42x13.5 HAe 5mm-Prime HAe 8mm-Prime HAe12mm-Prime HAe16mm-Prime HAe20mm-Prime HAe34mm-Prime HAe40mm-Prime HAe40mm-PrimeB-M10* HAe54mm-Prime HAe54mm-PrimeB-M10* ZA12x4.5 ZA17x7.6 ZA22x7.6 Fujinon 1/2" HD XS13x3.3 HS16x4.6 XS17x5.5 HS18x5.5 Fujinon 1/3" HD TH13x3.5 TH16x5.5 TH17x5 HTS18x4.2

Exterior Ø 130 mm 130 mm 130 mm Old 120 / 95 mm 95 mm 95 mm 95 mm 95 mm 95 mm 95 mm 95 mm 95 mm 95 mm 95mm 85mm 100 mm Exterior Ø 95 mm 85 mm 85 mm 85 mm Exterior Ø 85 mm 85 mm 85 mm 85 mm

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 54

Overview – Video lenses: Canon Please note

* these lenses are “cine style” versions with mod 0.8 /

Canon 2/3" SD

Exterior Ø

J8x6 J9ax5.2 J9ax5.2 KLL-SC* J11x4.5 YJ12x6.5

95 86 95 95 86

YJ13x6

86 mm

J13ax9

80 mm

J14x8

85 mm

J15ax8 J15x9.5 J16ax8 J17ax7.7 YJ17x9.5 J18x8.5 YJ18x9 YJ19x9 J20ax8 YJ20x8 YJ20x8.5 J21ax7.8 J22ex7.6 J33ax11 J33ax15 J35x11 J35x15

85 80 85 85 85 90 85 85 98 85 85 98 98 130 130 130 130

mm mm mm mm mm

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Canon 1/2" SD PH13ax7 YH12x4.8 YH13x7.5 PH14ax6.6 H15ax6 PH15x7 Type I PH15x7 Type II

Exterior Ø 80 86 85 85 85

mm mm mm mm mm

Canon 2/3” HD

Exterior Ø

HJ8x5.5 HJ9x5.5 HJ9x5.5 KLL-SC* KJ10ex4.5 HJ11x4.7

95 86 86 95 95

80 mm

HJ11x4.7 KLL-SC*

95 mm

85 mm

KJ13x6

86 mm

YH16x7

85 mm

HJ15x8

98 mm

YH17x7 YH18x6.7 PH18x6.2 YH19x6.7 H20ax6 YH20x8.5 H21ax5.8

85 85 90 85 98 85 98

KJ16ex7.7 HJ16x8 HJ17x7.6 HJ17ex7.7 HJ18x7.8 HJ18x7.8 KLL-SC * HJ18ex28 HJ20x8 KJ20x8.5 HJ21x7.5 HJ21x7.5 KLL-SC* KJ21ex7.6 HJ21x7.8 HJ22ex7.6 HJ40x10 HJ40x14 FJ5mm Prime FJ9, 14, 24, 35, 55mm Prime FJs5, 9, 14mm Prime FJs24, 35, 55mm Prime

mm mm mm mm mm mm mm

mm mm mm mm mm

85 mm 85 mm 85 mm 98 mm 105 mm 105 mm 121mm 98 mm 85 mm 117 mm 130 mm 98 mm 98 mm 98 mm 132 mm 132 mm 120 mm 80 mm 95 mm 95 mm

Canon 1/2" HD KH10ex3.6 KH13x4.5 KH16ex5.7 KH20x6.4 KH21ex5.7

Canon 1/3" HD KT20x5

Exterior Ø 95 86 85 85 98

mm mm mm mm mm

Exterior Ø 85 mm

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 55

Overview – Video lenses: Angenieux, Cooke, Zeiss Please note:

Angeniéux 2/3" SD 12x5.3 14x9 15x8.3 19x7.3 26x7.8 40x11 40x15

* these lenses are “cine style” versions with mod 0.8 /

Exterior Ø 92 mm 92 mm 85 mm 87 mm 103 mm 132 mm 132 mm

Angeniéux 2/3” HD 10x5.3 10x5.3 * 11.5x5.3* 12x9.7 12x9.7 * 19x7.3 19x7.3 * 26x7.8 26x7.8 * 40x11 40x15

Exterior Ø 92 mm 92 mm 100 mm 162 mm 162 mm 87 mm 87 mm 103 mm 103 mm 132 mm 132 mm

Zeiss 2/3” HD 5-70 mm Primes 3.9mm Prime 6-24 mm Zoom* 17-112mm Zoom *

Exterior Ø 95 mm 95 mm 95 mm 95 mm

Cooke 2/3” HD 8-46mm Zoom*

Exterior Ø 150 mm

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 56

Overview – Video lenses: DV / HDV 1/3”

Canon Canon XL-1 Canon XL-2 Canon XM-1 Canon XM-2 Canon GL-1 Canon GL-2 Canon XH-A1 Canon XH-G1 Canon XL-H1 Canon WD-H72

Sony Sony HVR-A1 Sony PD-100 Sony PD-150 Sony PD-170 Sony PD-X10 Sony 10P Sony TRV-900 Sony TRV-950 Sony VX-1000 Sony VX-9000 Sony VX-2000 Sony DSR-200 Sony DSR-250 Sony DSR-390 Canon YJ19x6.7 Sony HVR-Z1U Sony HDR-FX1 Sony VCL-HG 0737 Sony VCL-HG 0758 (use ring 411-27 Ø 104:94mm) Sony VCL-HG 0872

Filter thread Ø 72 mm 72 mm 58 mm 58 mm 58 mm 58 mm 72 mm 72 mm 72 mm Filter thread Ø 37 mm 52 mm 58 mm 58 mm 37 mm 37 mm 52 mm 37 mm 52 mm 52 mm 58 mm 52 mm 58 mm 72 mm 72 mm 37 mm

Exterior Ø

81 81 81 109

mm mm mm mm

Exterior Ø

Panasonic Panasonic DVX-100 (Obj. Leica 4.5 - 45mm) Panasonic AG-EZ1 Panasonic NV-DX1E Panasonic conversion lens AG-LA7200G (Special design: Mattebox 411-50P) Panasonic HVX-200 / HPX171 / HMC151 Panasonic LW7208G Panasonic HPX171 / HMC151

JVC JVC GY-DV300 (lens 14x5.6) JVC GY-HD100 (lens 16x5.5 and lens 13x3.5) JVC GY-HD101 (lens 16x5.5 and lens 13x3.5) JVC GY-HD110 (lens 16x5.5 and lens 13x3.5) JVC converter WCV-82SC JVC GY-DV550 (lens 14x7.3) JVC GY-HD200 JVC GY-HD251

Filter thread Ø Exterior Ø 72 mm 52 mm 52 mm rectangular 72 mm 72 mm

91 mm 97 mm -*

Filter thread Ø Exterior Ø 52 mm 82 mm 85 mm 82 mm 85 mm 82 mm 85 mm 85 mm 62 mm 65 mm 82 mm 85 mm 82 mm 85 mm

85 mm 81 mm 81 mm 93 mm 96 mm

- * not applicable

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 57

Overview – Century Converter for Video lenses: DV/HDV 1/3” Filter thread Ø

Century converter AD-5820-00 AD-5840-00 AD-5870-00 AD-7220 AD-7235 DS-1609-58 DS-1609-GL DS-20TC-58 DS-20TC-GL DS-20TC-SB DS-55WA-58 DS-55WA-SB DS-65CV-58 DS-65CV-SB DS-FEWA-58 DS-FEWA-GL DS-FEWA-SB DS-WS13-58 DS-WS13-GL DS-WS13-SB DS1609-SB OAD-3725-00 OAD-7220-00 OAD-7235-00 OAD-8616-00 OAD-8620-00 OAD-8626-00 ODS-1609-37 ODS-55WA-37 ODS-FEWA-37 ODS-HR20-37 ODS-HR65-37 OHD-06WA-HVX OHD-06WA-XLH OHD-16TC-HVX OHD-16TC-SH6

+ 2.0 Dioptre + 4.0 Dioptre + 7.0 Dioptre + 2.0 Dioptre + 3.5 Dioptre 16:9 Widescreen adaptor 16:9 Widescreen adaptor 2x Tele converter 2x Tele converter 2x Tele converter .55x Wide angle converter .55x Wide angle converter .65x Wide angle converter .65x Wide angle converter .3x Ultra Fisheye adaptor .3x Ultra Fisheye adaptor .3x Ultra Fisheye 1.33x Anamorphic conv. 1.33x Anamorphic conv. 1.33x Anamorphic conv. 16:9 Widescreen adaptor + 2.5 Dioptre + 2.0 Dioptre + 3.5 Dioptre 1.6 Dioptre + 2.0 Dioptre + 2.6 Dioptre 16:9 Widescreen adaptor .55x Wide angle converter .3x Ultra Fisheye 2x Tele converter .65x Wide angle converter .6x Wide angle converter .6x Wide angle converter 1.6x Tele converter 1.6x Tele converter

37 mm 72 mm 72 mm 86 86 62 43

mm mm mm mm

62 62 102 102 102 102

mm mm mm mm mm mm

Exterior Ø

Century converter

60 60 60 75.4 75.4 75 75 80 80 80 75 75 80 80 112 112 112 95 95 95 75 40 75.4 75.4 88.5 88.5 88.5 69 45 78 65 65 105 105 104.97 105

OHD-16TC-XLH OHD-20TC-HVX OHD-20TC-SH6 OHD-55WA-SH6 OHD-65CV-SH6 OHD-75CV-HVX OHD-FE3X-SH6 OHD-FE3X-XLH OHD-FEAD-SH6 OHD-FEAD-XLH OHD-FESU-HVX OHD-FEWA-HVX OTC-16LC-85 OVS-08CV-72 OWA-7X5X-00 OWA-7X93-00 OWA-8XLC-00 OWA-FESU-RD OXF-213B-00 VS-06WA-DVX VS-06WA-HDS VS-06WA-MXL VS-06WA-XL2 VS-07CV-DVX VS-07CV-HDS VS-07CV-MXL VS-07CV-XL2 VS-16CV-HDS VS-16TC-DVX VS-16TC-MXL VS-16TC-XL VS-FE3X-DVX VS-FEWA-3XL VS-FEWA-DVX VS-FEWA-MXL VS-FEWA-XL

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Filter thread Ø 1.6x Tele converter 2.0x Tele converter 2.0x Tele converter .55x Wide angle converter .65x Wide angle converter .75x Wide angle converter .3x Ultra Fisheye .3x Ultra Fisheye Fisheye Fisheye Fisheye Xtreme Fisheye 1.6x Tele converter .8x Wide angle converter Wide angle adaptor Set (.7x and .5x) .7x Wide angle converter .8x Wide angle converter Super Fisheye 2.0x Tele converter .6x Wide angle converter .6x Wide angle converter .6x Wide angle converter .6x Wide angle converter .7x Wide angle converter .7x Wide angle converter .7x Wide angle converter .7x Wide angle converter 1.6x Tele converter 1.6x Tele converter 1.6x Tele converter 1.6x Tele converter .3x Ultra Fisheye Fisheye Fisheye Fisheye Fisheye

102 102 102 86 86

Exterior Ø

mm mm mm mm mm

105 105 105 90 90 105 116.7 115 100 90 120 117.8 58.2 86 mm 90 133.3 119.9 109.95 132.71 105 95 95 95 95 95 105 95 95 105 105 105 105 116.7 90 90 90 90

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 58

Overview – motion picture lenses: Angénieux Zoom 10 – 120 mm Zoom 11.5 – 138 mm Zoom 17 – 80 mm Zoom 15 – 40 mm Zoom 28 – 76 mm Zoom 25 – 250 mm Zoom 10 – 150 mm, 12 – 120 mm Zoom 7 – 81 mm Zoom 24 – 290 mm Canon Canon 11.5 - 138 and 11 - 165 Canon 7 - 53, 7 - 56 and 8 - 64 Canon 6mm Canon 10mm, 15mm, 24mm, 35mm Canon 6.6 – 66mm Canon 10.6 – 180mm Cooke Cooke 9 - 50, 10.4 - 52 Cooke S4 (14, 16, 18, 25, 32, 50, 75 and 100mm Cooke S4 ( 6, 9.5, 12mm) – new lenses Cooke 20 - 100 Cooke S4/i 15 – 40 mm Cooke 18 – 100 Cooke RED Set (Zooms and Prime lenses) Cooke 25 – 250 Cinetal Cooke 25 – 250 MK II Cine Varotal Cooke 25 – 250 Cine Varotal Cooke 20 – 60 Varopanchro Elite lenses Prime lens 9.6mm Prime lens 12mm and 14mm Prime lens 16mm, 18mm, 20mm, 22mm, 24mm, 28mm, 35mm OpTex OpTex Super Cine 4mm OpTex Super Cine 8 and 5.5mm

Exterior Ø 114 mm 114 mm 136 mm 114 mm 114 mm 136 mm 75 mm 100 mm 162 mm Exterior Ø 95 mm 95 mm 150 mm 80 mm 110 mm 95 mm Exterior Ø 83 mm 110 mm 110 mm 145 mm 136 mm 150 mm t.b.a. 150 mm 121 mm 124 mm 121 mm Exterior Ø 156 mm 132 mm 110 mm Exterior Ø 150 mm 90 mm

Zeiss Zeiss 10 - 100, 11 - 110, Century 6mm Zeiss Prime lenses Zeiss HS lenses Zeiss 9.5 and 12mm - old model Zeiss 16mm and 25mm - old model Arri Zeiss Ultra Prime Distagon 8mm Ultra Prime Distagon 10mm, 12mm Ultra Prime Distagon 14mm Ultra Prime Distagon 16mm, 20mm, 24mm, 28mm, 32mm and 40mm Ultra Prime Planar 50mm, 65mm, 85mm, 100mm, 135mm Ultra Prime Super 16 Distagon 6, 8, 9.5, 12, 14, 18, 25, 35, 50mm Ultra Prime Sonnar 100mm, 135mm Ultra Prime Sonnar 180mm Variable Primes VP1 (16-30mm), VP2 (29-60mm), VP3 (55-105mm) Prime Distagon 18mm, 25mm, 35mm, 16mm, 20mm, 24mm, 28mm Prime Distagon 10 mm Prime Distagon 14 mm Prime Planar 50mm, 65mm, 85mm, 32mm, 40mm Prime Planar 100mm, 135mm, 180mm Prime Makro-Planar 60 mm ARRI 12 mm

Exterior Ø 87 mm 80 mm 80 mm 70 mm 62 mm Exterior Ø 134 mm 156 mm 114 mm 95 mm 95 mm 95 mm 95 mm 114 mm 150 mm 80 mm 156 mm 114 mm 80 mm 80 mm 80 mm 135 mm

Master Primes (16mm, 18mm, 21mm, 25mm, 27mm, 32mm) Master Primes (35mm, 40mm, 50mm, 65mm, 75mm, 100mm)

114 mm 114 mm

Ultra Super 16mm (6mm, 8mm, 9.5mm, 12mm, 14mm) Lightweight Zoom LWZ-1 15.5 – 45mm OPTAR Illumina Prime lenses 8mm, 9.5mm, 12mm, 16mm, 25mm, 50mm RED lenses RED 18-50mm RED 50-150mm RED 300mm

95 mm 114 mm Exterior Ø 80 mm Exterior Ø 114 mm 114 mm 117 mm

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 59

Remote control systems:

The wireless remote dimmer for on-board-light. The wireless remote follow focus The automatic remote lens control

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 60

Wireless remote dimmer for head light / on-board-light. Colibri controls the head light of the “suspended cameras” and each mobile DMX dimmer from the lighting console.

Transmitter and receiver are equipped with the same controls.

The transmitter takes in the control input of the DMX board, changes it into a digital data package and transmits the setting to the receiver with built-in dimmer. All tungsten lights of up to 75 watts can be connected to the dimmer. The necessary control voltage for the LED lights from Litepanel is also accessible from the receiver, so that the LED light’s internal dimmer also is controlled. An 8-pin jack is available on the receiver, thus providing the option to control remotely other manufacturers’ LED lights in the future. At this jack, the DMX signal of the set address is available, too. With this, lights which are mounted at wider distance or high above the scene can be remote-controlled. Although the control of the light controller from the DMX signal is the main use, there is also the possibility to set the dimmer manually using a potentiometer from the transmitter and on the camera (receiver). This should be seen, initially as an emergency feature, but can also be used intentionally. If there is no DMX signal for the transmitter, this switches to manual and a blue LED light on the potentiometer shows its activity. If the transmitter is switched off or there is no RF signal at the receiver for other reasons, its potentiometer adjusts the brightness. All DMX addresses from 1 to 512 can easily be set decimally on three scales.

The transmitter with the DMX input.

Rear views: The receiver with DMX signal output and integrated dimmer up to 75 W.

The same radio modules are used as with the lens control Aladin. This means that the same frequencies are available and because the “language” is otherwise the same, the Colibri receiver/dimmer can be operated by an Aladin remote control, too.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 61

Wireless remote - Dimmer for head light / on-board-light.

Components: Article no. Transmitter, receiver, power supply for transmitter, 2 FD-400 antennas, 5-pin DMX cable Anton/Bauer power cable f. receiver FD-AB 4-pin XLR power cable f. receiver FD-XLR Technical Data: Transmitter frequencies: 16 channels; 433.1-434.225 MHz Transmitter performance: 10 mW on 50 Ohms Range (open area) approx.: 300 m / 330 yards Weight / measurements(g / mm): 200 / d80 h42 w96 Dimmer for Halogen lights: PWM / 75 Watt max. Compatible with LED lights from the Litepanel manufacturer: Other LED lights upon request.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 62

The wireless remote follow focus. DigiFOX is a reliable companion in all recording with a moving camera. Whether using a crane, dolly or stabilizer, the DigiFOX wireless remote follow focus is simply and quickly ready to use. It transmits the control signal as a digital data package to motors with incremental encoders. Only the DigiFOX also controls internal focus motors as well as the start/stop signal of the Panasonic HDV camcorder HVX200, HPX171 and others. - 16 transmission channels are selectable within the 434 MHz – frequency band - Range* approx. 300m/330yards outdoors and approx. 80m / 90yards in buildings - Light weight, compact receiver (8x4x9.5 cm / 3x1.6x3.7 inch, weight 260 g / 9.2 ounces) - Compatible with external motors with incremental decoders and internal focus servo motors of many EB lenses from Canon and Fujinon - Automatic calibration of the end settings and power provision for the motor dependent on the lens’s mechanical performance - Resolution 32 bit, integrated ON/OFF or start/stop recording function - “Electronic gear” for spreading or compressing of the translation ratio between the hand wheel and motor reaction - Memory of the last settings if the battery must be changed. - Also controls the dimmer module from the Aladin system - Integrated serial interface RS 232 for easy software upgrades or connecting to PC or PDA - NiMH battery 6V, 600 mA DC; charger for 110-240 V AC, 17VA; with all international plug adapters - Lowest power consumption, a battery charge usually last for an entire day.

* dependent on the structural conditions at the set.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 63

The wireless remote follow focus.

Without an external motor, the DigiFOX can control the following Panasonic cameras as well as trigger the start/stop signal: AG-HVX200, AG-HPX171, AG-HMC150 series; AG-DVX100BE, AG-DVX100B, AG-DVX100E, AG-DVX100A, AG-DVC80, AG-DVC30

AL-LS, Light Source, the dimmer module for Aladin and DigiFOX.

RMB, Holder for the receiver on 15mm support rods.

Components Article no. DigiFOX, System complete, as shown DF-400 Accessories Holder for the receiver on 15mm support rods RMB Digital Motor by Heden, suitable for 15 & 19mm rods mount vertically, with all gear drives modules 0.8, 0.6, 0.5, 0.4. M26VE Digital Motor by BTM, same fittings as with Heden BTM7 Motor cable, Lemo plug, 8-pin, motor on DigiFOX or Aladin AMOTD Dimmer module, 12V / max. 75 W, incl. cable (see AL-LS-X) AL-LS Dimmer cable, XLR 4-pin plug for power supply, Lemo 7-pin for receiver motor connection, Lemo 3-pin for dimmer AL-LS-X module. (Spare part, included with the dimmer module) Accessories such as mountings, power supply cables with and without start/stop transmission are available for all film and video cameras. An overview can be found on the pages 66 & 67.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 64

The automatic lens remote control. Aladin is the user-friendly remote control. Carry out automatic calibration of the lens parameters at the beginning of shooting – switch off, reconfigurate or change the battery – switch on again and resume the shooting. This advantage is especially appreciated in practice. -

Control signals are transmitted as digital data packages in the 434 MHz band safely and precisely with 18-bit resolution. The software calculates with 32 bit accuracy. Suitable for many motors with digital incremental encoders such as Heden M26VE, Scorpio SB92, Preston DM2, Bez Tools BTM7. The iris of all “Cine style” zooms and prime lenses can be controlled over the TRIAX using the special Aladin cable (COF-V-TI). Controls the dimmers Aladin Light Source (AL-LS) and Colibri, the DMX dimmer/receiver (FD-400E). Ranges* from approx. 300m / 330yards outdoors, approx. 80m / 90yards in inside buildings. ON/OFF or start/stop recording function integrated for all cameras. With “Electronic Gear” for free selection of the translation between the hand wheel movement and the reaction at the lens. Memory of last settings after switch off for quick resumption of operation. Wide supply-voltage range from 9 to 37 volts for the motor controller (receiver). Powerful, adequate performance for the motors also with low supply voltage through internal stabilisation. Modular design, each individual function can be combined into one transmitter through simple assembly. Here, too, all the last individual settings are saved. Reverse direction of the motor rotation is adjustable on the hand-units (transmitters). An LED column shows the position of the zoom. Lowest energy consumption of the hand-unit(s), a battery usually lasts for the entire day of shooting. 16 channels selectable for the transmission. Adjustable fluid damping for the focus hand wheel. Emergency feature: Transmission by connecting transmitter and receiver using a simple video cable with BNC plugs. * Dependent on the structural conditions at the set.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 65

The automatic lens remote control.

Mountings for 19 and 15 mm rods available.

RMB, Holder for the receiver on 15mm support rods.

Motor complete, for 15 and 19mm rods as well as with all lens gear wheels.

AL-RKE Universal rod clamp.

Components Aladin 2+ Two channel design for focus, aperture/Triax aperture + camera start/stop. Contains hand-unit with transmitter, scale-ring, 2 NiMH batteries, charger, receiver with outputs for two motors, 2 antennas and instructions. Aladin 3+ Three channel design for focus, aperture/Triax aperture, zoom + camera start/stop. Other equipment as described above, receiver with outputs for three motors. Aladin Zoom Control Separate unit for control of the zoom rings. Contains hand-unit with transmitter, 2 NiMH batteries, charger, receiver with outputs for one motor, 2 antennas and instructions . (An upgrade to Focus and Iris is possible.) Aladin Upgrade Kit For Aladin 2+ on 3+. Contains hand-unit for the zoom control, and motor controller circuit board for installation the Aladin 2+ receiver. Accessories Motor with incremental encoder, digital from Heden Motor with incremental encoder, digital from Bez Tools Connector cable between motor and receiver with Lemo 8-pin plugs Holder for the receiver on 15mm support rods Aladin universal rod clamp with jacks and contact plugs Aladin universal rod clamp Aladin dial illumination, LED light with flexible arm Graduated ring for focus unit Light Source, dimmer for tungaten lights up to 75 W, for connection to a free motor output, complete with cable set

Article no. AL-3-401

AL-4-401

AL-Z-400

AL-ZUP

M26VE BTM7 AMOTD RMB AL-RKE AL-RK Si SC AL-LS

Accessories such as rod clamps and mountings, power supply cables with and without start/stop transmission are available for all film and video cameras. An overview can be found on the pages 66 & 67.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 66

Overview – Accessories and cables for the remote control systems. Accessories DigiFOX FMB

NiMH battery for FOX, rechargeable 6V/600mA

Accessories ALADIN AL-BAT

NC battery for Aladin, rechargeable

AL-CH AL-CP

Charger with adapter for Aladin battery, 100-240V Config. Dummy Plug for Aladin external iris, spare part

AL-HWA

Aladin Hardwire Adapter for external iris, cable-length 3m

AL-HWA-Z

Aladin Hardwire Adaptor for Zoom, cable length 1m (cableconnection instead of battery, in combination with AL-RK)

AL-Fi

Aladin Focus/Iris hand-unit, spare part

AL-i

Aladin External Iris hand-unit with Dummy Plug

AL-i/DMX AL-MOTC AL-MCA7 AL-PHA

Aladin External Iris with DMX input for light control, with Dummy Plug Aladin MC Board for digital motors, spare part Assembly Clamp (01841 MCA-7) for Aladin Pan Handle Adapter Pan Handle Adapter for Aladin (for mounting using clamp ALMCA7)

Accessories ALADIN / DigiFOX EU15-82

Extension unit Ø 15:15mm (without rod, length distance between holes 82mm)

EU19-82

Extension unit Ø 19:15mm (without rod, length distance between holes 82mm)

DigiFOX cable for Panasonic DVX100 / HVX200(P2)/ and any other models combi-cable: controls internal focus motor for Panasonic DVX/HVX and DFMPVX with start/stop function. 2.5mm stereo and 3.5 mm stereo jack 4-pin -to DigiFOX Hirose 12-pin. For power supply of DigiFOX receiver, an additional cable is required. (e.g. XLR4-AL) DigiFOX cable, combined for power supply and for internal focus motor DFPMCD combi-cable: power supply / motor control internal focus motor Canon digital Hirose 20-pin – to DigiFOX Hirose 12-pin DFPMCA combi-cable: power supply/ motor control internal focus motor Canon analogue Hirose 6-pin - to DigiFOX Hirose 12-pin DFPMF

combi-cable: power supply / motor control internal focus motor Fujinon Hirose 12-pin - to DigiFOX Hirose 12-pin

When using the above-mentioned combi-cable and at the same time, the camera’s remote control start/stop function, please use the following special DFCOF4x cable.

AL-T400

Aladin Transceiver module with antenna (433-434 MHz, 16 channels)

DigiFOX cable, camera start/stop in connection with combi-cable DFPMx for internal focus motor

AL-Z

Aladin Zoom hand-unit

DFCOF4C

Accessories ALADIN / DigiFOX FANT

Antenna (straight) for transmitter (FOX, ALADIN transceiver)

FANTR

Antenna (angled) for receiver (FOX, ALADIN Motor Controller)

RMB 401-10 SC

Holder for attaching the receiver to 15mm rods Adapter for RMB on bridge plate with Ø19mm rods Graduated ring for focus hand wheel

Si EU15 EU19

Light for Scale Illumination, (LED) for Aladin and DigiFOX Extension unit Ø 15:15mm, with rod Ø 15mm Extension unit Ø 19:15mm, with rod Ø 15mm

EU15-60

Extension Unit Ø 15:15mm (without rods, length distance between holes 60mm)

cable for start/stop when using the cable DFPMCx for Canon lens with focus motor, Canon-plug 8-pin - for DigiFOX Hirose 4-pin

DFCOF4F

cable for start/stop when using the cable DFPMF for Fujinon Focus motor, Hirose 12-pin - for DigiFOX Hirose 4-pin DigiFOX cable, camera Start/stop – when using the power supply cables on the Hirose 4-pin jack Start/stop cable DigiFOX Hirose 12-pin – directly on the video camera on DFCOFV-V Hirose 12-pin (Please note: differing pin assignments!) DFCOFV-C

Start/stop cable DigiFOX Hirose 12-pin - over lens Canon 8-pin

DFCOFV-F

Start/stop cable DigiFOX Hirose 12-pin - over lens Fujinon Hirose 12-pin (Please note: differing pin assignments!)

DFCOFAA2

Start/stop cable DigiFOX Hirose 12-pin - Aaton camera, Lemo 2-pin FFA.0S.302

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 67

Overview – Cable for the remote control systems. DigiFOX cable, camera start/stop – when using the power supply on the Hirose 4-pin jack, continued. DFCOFAA6 Start/stop Cable DigiFOX Hirose 12-pin Aaton camera Lemo 6-pin FGG.1B.306 DFCOFMOV Start/stop cable DigiFOX Hirose 12-pin - Moviecam Compact Fischer 2-pin S102AO51 DFCOFPAN Start/stop cable DigiFOX Hirose 12-pin - Panavision Lemo 10-pin FFP.2S.310 DFCOFA Start/stop cable DigiFOX Hirose 12-pin - ARRI 12V Fischer 11-pin S104AO056 DFCOFA-M Start/stop cable DigiFOX Hirose 12-pin - ARRI, Moviecam SL, Pro35 Adapter Fischer 3-pin S102AO52 DFCOR1 Start/stop cable DigiFOX Hirose 12-pin - RED One camera Lemo 4pin (0B; upper AUX-out jack in standard setting) ALADIN cable, camera start/stop

ALADIN / DigiFOX cable, combined for power and camera start/stop AA-A-P/cam Arri-A-P-Cam RS-A-P/cam PAN-A-P/cam

ALADIN / DigiFOX cable, only for power supply MovC- AL

MKV-AL

Power cable Moviecam Compact 24V, 2-pin Fischer - for Aladin / DigiFOX Hirose 4-pin Power cable Panavision Millenium 24V, Lemo 2-pin – for Aladin / DigiFOX Hirose 4-pin Power cable PRO / ARTEMIS 12V, Lemo 4-pin – for Aladin / DigiFOX Hirose 4-pin Power cable RIG 12V, Lemo 3-pin - for Aladin / DigiFOX Hirose 4-pin Power cable Steadicam Master 12V, Lemo 2-pin- for Aladin / DigiFOX Hirose 4-pin Power cable Steadicam ULTRA 24V, Lemo 3-pin – for Aladin / DigiFOX Hirose 4-pin Power cable MK-V – for Aladin / DigiFOX Hirose 4-pin

XLR4-AL

Power cable 12V/24V XLR 4-pin – for Aladin / DigiFOX Hirose 4-pin

AB-AL

Power cable 12 volt Anton Bauer Power Tap – for Aladin / DigiFOX Hirose 4-pin Power cable 12 volt BP 90 plug PAG lok-on – for Aladin / DigiFOX Hirose 4-pin

PanMill-AL

COFA

Start/stop cable ALADIN / Genio 4-pin Lemo - ARRI 11-pin Fischer

PRO-AL

COFAA2 COFAA6

Start/stop cable ALADIN / Genio 4-pin Lemo - Aaton 2-pin Start/stop cable ALADIN / Genio 4-pin Lemo - Aaton 6-pin Lemo

RIG-AL STM-AL

COFA-M

Start/stop cable ALADIN / Genio 4-pin Lemo - ARRI SR III, 535 + Moviecam SL + Pro35 adapter - 3-pin Fischer Start/stop cable ALADIN / Genio 4-pin Lemo - Moviecam Compact 2pin Fischer Start/stop cable ALADIN / Genio 4-pin Lemo - Panavision Lemo 10pin Start/stop cable ALADIN / Genio 4-pin Lemo - Video Canon lens 8pin Start/stop cable ALADIN / Genio 4-pin Lemo - Video Fujinon lens Hirose 12-pin (Please note: differing pin assignments!) Start/stop cable ALADIN / Genio 4-pin Lemo - direct on the video camera with Hirose 12-pin (Please note: differing pin assignments!) Start/stop cable ALADIN / Genio 4-pin Lemo - RED camera-Lemo 4pin (0B; upper AUX-out jack in standard setting)

STU-AL

COFMOV COFPAN COFV-C COFV-F COFV-V COFR1

ALADIN cable for TRIAX-Iris and camera start/stop COFV-V-TI

Aladin Triax-Iris and camera start/stop cable 4-pin Lemo - for Hirose 12-pin on video camera, with calibration device (Impulse switch) for Cinestyle lens and fixed focal lengths

Kombi -Cable: Power + camera-Start/Stop Aaton camera-6-pin Lemo, 45cm/17.7" – for DigiFOX / Aladin Hirose 4-pin Kombi-cable: Power + camera-Start/stop ARRI camera-12V 11-pin Fischer, 45cm/17.7" – for DigiFOX / Aladin Hirose 4-pin Kombi-cable: Power + camera-Start/stop ARRI/Moviecam SL camera24 volt 3-pin Fischer, 45cm/17.7" – for DigiFOX / Aladin Hirose 4-pin Kombi-cable: Power + camera-Start/stop Panavision 10-pin Lemo, 60cm/23.7" – for DigiFOX / Aladin Hirose 4-pin

BP90-AL

ALADIN cable, for Light Source (Aladin System immer i. V. m. DMX-Iris) AL-LS-X DMX-AL2 DMX-AL3

Dimmer cable with XLR 4-pin for 12V power-in, Lemo 7-pin for receiver motor jacks, Lemo 3-pin for dimmer (replacement cable) Interface cable for Aladin External DMX Iris for the control with Iris channel 2 (5-pin XLR coupling, 7-pin 1B Lemo plug length 2m) Interface cable for Aladin External DMX Iris for the control with zoom channel 3 (5-pin XLR coupling, 7-pin 1B Lemo plug length 2m)

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 68

Collimation: Autoreflex and CamCollimator. Measuring at ∞ Two types, three devices are available. For daily use in film and video equipment rentals and service, the CamCollimator preferable because the user is not dependent of the individual observation and delivers objective, precise measurement values quickly and simply. With this time-proven process, the sharpness of the picture is no longer the adjustment criteria, but rather the symmetrical position of a simple beam between a double bar.

1

Universal CamCollimator

back focal length too little correct too much sharpness is lying sharpness is lying in front of image plane behind image plane

The CamCollimator available now in two versions. The time-proven UniversalCamCollimator with two sliding bases and a autocollimator holder which can slide and swivel, mounted on a spindle drive for height adjustment to measure the back focal length on cameras and lenses. Additionally, a plate on the film camera can be pivoted for parallax and image steadiness measuring. Newcomer is the LensCamCollimator. It is much more compact in structure then the Universal CamCollimator, measures just as precisely and easily but only measures lenses. Using fixed centering of the collimation unit and the gauge mounting block in the optical axis as well as forgoing the second movable base for camera measurements, a significant reduction in weight, space needs and an optimal price/performance ratio can be achieved.

Beam Converter for F 4-19 mm wide-angle lens measurement. It intensifies the light 15 X and ensures a clear image on the monitor.

The classical Autoreflex Collimator with eyepiece and Siemens star is recommended if there is a limited budget and measurements must only be taken occasionally. Through the height adjustability of the collimation unit, film cameras can also be measured in addition to lenses.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 69

Collimation: Autoreflex and CamCollimator. Measuring at ∞ Collimation Unit and fibre optics of the two CamCollimators

Autoreflex Collimator

Components Universal CamCollimator Reading accuracy of the micrometer :0.001mm • Collimation unit Mark III 45S slidable, tiltable and height adjustable • Focal length range: 6-300mm • Power supply 115 or 230V with cold light source 150W and fibre optics • Steel rods, stainless steel, L=1.5m • 2 sliding platforms, 1st incl. Digital micrometer o 2nd for cameras up to 100kg or in use as sliding lens support • Swing-in Test Table for image steadiness and parallax testing • Holder for the monitor • CCD-camera ( black / white) with C-mount and power supply • Eyepiece, for visual observation • Plane glass in a case LensCamCollimator Reading accuracy of the micrometer: 0.001mm • Collimation unit Mark III 45S, mounted fix and centred on-axis • Focal length range: 6-300mm • Power supply 115 or 230V with cold light source 150W and fibre optics • Steel rods, stainless steel, L=1.0m • 1 sliding platform with the lens gauge block including digital micrometer • Sliding lens support • Holder for the monitor • CCD-camera (black / white) with C-mount and power supply • Eyepiece, for visual observation • Plane glass in a case Autoreflex Collimator, The reading accuracy of the micrometer: 0.001mm. Focal length range 5mm300mm. Includes: Siemens star as a reticule plate; collimating telescope F300, ∅ 65mm, Measurement range 2° (Option: collimating telescope F140, ∅ 40mm, Measurement range 4°; adapter ∅ 65 to 40mm); Power supply 115 or 230V with Illuminator; Steel rods, stainless steel, L=1m; sliding platform for camera or with the gauge mounting block incl. digital micrometer; sliding lens support.

Article no.

C-LTB 115 C-LTB 230

C-LCC 115 C-LCC 230

C-CTB 115 C-CTB 230

Mountings for photo, film and video formats can be found in the overview page 71

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 70

Projection: Test-Projector MK5 for all esablished formats.

Projector with lens mount and 19mm support rods.

The new projector MK5 offers even more precision than its predecessor. The guide block for slide holder, produced for us by the specialist Schneeberger, now has a length of 53 mm almost twice the capacity as the previous model. Therefore: Over the entire sliding range the sled is guided 100%. In order to ensure that the entire tolerances remain in the μ-range and by this become irrelevant for precise measurement of the lens, the entire unit is again centred and parallelized after its assembly by using a CNC machining centre. Mounts with glass way for SD and HD video as well as the different photo and cine lenses are available. We recommend the remote control because it makes it possible to be near the projector screen at an optimal distance to focus the picture. Technical data, scope of delivery: - Gauge with a precision of 0.01mm - Plane Glass, mounted in slide holder - Eclair C-Mount as base mount for all others - Low voltage orientation lamp on goose neck - Projector lamp with 250 W - Mains supply switchable 115 / 230 V AC - Adjustment range for measurement of the back focal length: ± 1.3mm

Test-slide precisely mounted.

Remote control for motorised focussing, also for earlier models.

Components Article no. Test-Projector MK5 P-TP5 Accessories Test slide cine, 35mm and S16 format indicators P-TCF Test slide video, SD and HD format indicators P-TCHD Remote control, cable-connected, cable length according to choice P-RC Laser pointer, projects a dot for centre control of zoom lenses P-LP Adapter for 19mm support rods 401-10 Lens mountings and calibration aids for photo, film and video can be found on page 71. These are likewise usable for collimation and projection.

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Product catalogue 2008 Page 71

Lens mountings for collimation & projection. bfl = back focal length Mountings for collimation and projection Components Cine Mount for Aaton Mount for Arriflex PL Mount for Arriflex standard - bayonet Mount for Panavision Mount for BNCR connection Mount for C connection Components Video SD Chip Ikegami mount with glass way 2/3" B4 mount with glass way 2/3" (Sony, Hitachi, JVC, Panasonic, Thomson, etc.)

Sony mount with glass way BTS mount with glass way Components Video HD B4 mount with glass way

(Sony, Hitachi, JVC, Panasonic, Thomson, etc.)

A variety of mountings are available ex stock, others can be produced according to the customer’s requirements. Article no. C-AAA C-APL C-ASTB C-APA C-ABNCR C-ACM bfl mm 76.94 65.24

1/2” 1/2” Chip

52.71 50.45 bfl mm

2/3”

65.03

B4 mount with glass way for Zeiss 2/3” 65.06 Mount with glass way 1/3” 41.99 Components Photo KB (35mm still photography) Mount for Canon Mount for Leica M & R Mount for Nikon Mount for Olympus

P-VMI P-VMS P-VMS12 P-VMBTS12 P-VMHD P-VMZ P-VM13 P-FMC P-FMLM/R P-FMN P-FMO

Measurement cylinder with gauge. Graduation resolution: 0.01mm Measurement Measurement Measurement Measurement Measurement

cylinder cylinder cylinder cylinder cylinder

for ENG for Sony for BTS for for

SD 2/3" SD 1/2" SD 1/2" HDTV 2/3” HDTV 1/3”

65.24mm 52.71mm 50.45mm 65.03mm 41.99mm

C-MBENG C-MBS12 C-MBBTS12 C-MBHD C-MB13

Selected accessories for the CamCollimator Beam Converter, light amplifier for the measurement of wideangle lenses 4-19mm Adapter for Beam Converter on older collimators 2-metre converter, for measurements at a distance of 2 m Selected spare parts for the CamCollimator CCD-camera MT 012 B/W, incl. power supply and C-mount Plane glass in the case for all collimators (Ø 63mm)

Article no. C-BCWA C-BCWA-01 C-ATT2m CCD-LCTB C-PPG

Chrosziel GmbH, Klausnerring 6, D-85551 Heimstetten b. München phone +49 89 90 10 91 0 Fax +49 89 44 70 66 1 E-Mail info@chrosziel.de Web www.chrosziel.de Managing Directors: Harm Abrahams, Jürgen Nußbaum ● HRB 158740 Amtsgericht München ● VAT ID Nr. DE 249425648 ● For our deliveries and services solely our General Terms of Trade apply.


Chrosziel