Smart Farm

import time

# set the desired humidity levels low_humidity = 45 high_humidity = 55

# loop to read humidity data continuously while True:

# read the current humidity level

current_humidity = read_humidity_data() # replace with your own function to read humidity data

# check if humidity is below the desired level if current_humidity < low_humidity:

# turn on the water pump to water the plants turn_on_water_pump() # replace with your own function to turn on the water pump

print("Watering the plants...")

# check if humidity is above the desired level elif current_humidity > high_humidity:

# turn off the water pump to stop watering the plants turn_off_water_pump() # replace with your own function to turn off the water pump

print("Stopping watering...")

# wait for a few seconds before checking humidity again time.sleep(5) # adjust the sleep time as needed

Code รดนาเมอความชนในดนตากวา 45% เมอ ความชนในดนเทากบ 55% โปรแกรมจะหยดทํางาน

temperature = 45 # This is the starting temperature of the house while temperature > 30:

if temperature > 40:

# Turn on the ventilation system print("Turning on the ventilation system") temperature -= 1 # Decrease the temperature by 1 degree print("Stopping the ventilation system") # The temperature has reached 30, so stop the ventilation system

THANK YOU