Does the rpm of the saw, based on blade diameter, fall within the guidelines?

Visit us online at www.worlddiamondsource.com

BLADE BASICS

A diamond blade is a circular steel disc with a diamond bearing edge. The blade edge comes in three main types: segmented, with individual separate segments for long life; turbo, with continuous serrated edge for aggressive, fast cutting; and continuous rim, for smooth chip-free cutting.

The core of the blade is made of tensioned steel and sometimes has slots. These slots (also called gullets) cool the blade by allowing water or air to flow between the segments. They also allow the core to flex and dissipate stress while cutting, so the blade is less likely to crack. All blades are designed to run at specific rpms. It’s essential for safe operation and optimum performance that blades run at the correct rpm.

The diamond edge is made of a combination of manufactured diamonds and metal powders. Different mixtures of diamonds and metal powders are used, depending on the aggregate being cut. During the manufacturing process, the metal powder and diamonds are bonded together at high temperatures to form a solid metal alloy. This metal alloy is then bonded to the blade. A blade’s diamond edge is always slightly wider than the core so it doesn’t drag or bind in the material being cut.

A diamond blade cuts by grinding through the material. As the diamond edge wears, new and sharper diamonds are exposed.

CHOOSING THE RIGHT BLADE

Answer these simple questions when choosing your blade, or ask your World Diamond Source representative for advice. 1 What type of material is being cut? 2 Do you want a segmented, turbo or continuous rim blade? 3 What is the diameter of the blade? 4 Does the rpm of the saw, based on blade diameter, fall within the guidelines? 5 Will the blade be used in a wet cutting or dry cutting application? 6 Are you more concerned with the initial price or cost effectiveness of blade?

WET BLADES

Wet diamond blades must be used with a continuous flow of water to maximize performance and prevent excessive heat buildup. Water helps clear dust and cuttings away from the blade and slot being cut. Using a wet blade without adequate water, even for a few seconds, can cause blade damage and pose a safety hazard.

DRY BLADES

Dry diamond blades are designed to be cooled by airflow around the blade. They can be used either dry or wet. Note that every 10 to 15 seconds it’s necessary to take pressure off the blade and back it out of the cut, allowing it to run back up to full speed for several seconds. This technique cools the blade, maximizes performance and prevents excessive heat buildup that causes damage.

PRODUCT WARRANTY

World Diamond Source warrants all its products against defects in workmanship and materials for a period of one year from the date of purchase. The responsibility of World Diamond Source under this warranty is limited to replacement or repair of the defective parts, and action will be determined on a case-by-case basis. Under no circumstances will World Diamond Source be liable for consequential or incidental damages arising from misuse or improper operation of any products.

SHIPPING POLICY

World Diamond Source pre-pays freight on all orders via United Parcel Service or FedEx - Ground within the United States and Canada. Special service requests, such as next-day air or second-day air, is payable by the customer.

CONNECT WITH US:

AGGREGATE CLASSIFICATION MAP OF THE UNITED STATES

AGGREGATE MAP FOR U.S.A. & CANADA

BLADE OPERATING SPEEDS

DIAMETER

4" 4 1⁄ 2" 5" 6" 7" 8" 9" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 36" 42" 48"

RECOMMENDED RPM

9072 8100 7200 6000 5200 4500 4000 3600 3000 3000 2300 2200 2000 1800 1600 1600 1400 1200 1200 1100 900 800

MAXIMUM CUTTING DEPTHS

CONCRETE SAW BLADES MASONRY SAW BLADES DIAMETER

12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48"

CUTTING DEPTH

3 5⁄8" 4 5⁄8" 5 5⁄8" 6 5⁄8" 7 5⁄8" 9 5⁄8" 10 5⁄8" 11 5⁄8" 14 5⁄8" 17 5⁄8" 19 5⁄8"

DIAMETER

14" 20"

HIGH SPEED SAW BLADES DIAMETER

14" 20"

TILE SAW BLADES POWER HAND DIAMETER CUTTING SAW BLADES DEPTH DIAMETER CUTTING

6" 1 3⁄4" DEPTH 7" 2 1⁄4" 4" 1" 8" 2 3⁄4" 4 1⁄2" 1 1⁄4" 10" 3 3⁄4" 5" 1 1⁄2" 6" 2" 7" 2 1⁄2" 8" 3"