Core Products - Interfaces Reference
Details
IO Interface
IO Interface
Details
PAC-SA89TA-E
3 Wire Adaptor
Details
MAC-397IF
Hardwired Remote Controller Interface
Cost (£) 51
Hardwired remote controller interface, On/Off or Fire Alarm input and Run or Fault output. PAC-YT51CRB and PAR-21MAA connectable.
Cost (£)
Dimensions: 160x55x70 M and S Series
160
Monitor and control: On/Off, remote Permit/Prohibit using volt free contact. Control: Remote controller Permit/Prohibit using volt free contact, Setpoint, Mode and Fan Speed using a DC voltage (0 to 10V DC). Monitor: Run, Faults, Heating/Cooling, Thermo On/Off. Relay may be closed or opened under run and fault conditions. Includes two energy saving functions: Auto mode for 0.5, 1 or 2 hours and Dual Setpoint. Dimensions: 85x32x138 Splits ONLY
Reference
Reference
Reference
Details
MAC-399IF
A2M Adaptor
Cost (£) 113
Converter to M-NET. Connect to indoor unit.
Cost (£)
Dimensions: 160x55x70 M and S Series
5
Control the indoor unit On/Off remotely. The On/Off remote controller button will be disabled. By pushing the button, the remote controller will display “Centrally controlled”. (Cable length < 1m) City Multi and Mr Slim
Reference
Details
PAC-SA88HA-EP
5 Wire Adaptor
Cost (£)
Reference
Details
ProconTM TCB1
ProconTM TCB1 Remote Interlock
Details 9 Wire Adaptor for AG150 / GB50ADA
Cost (£) 30
Monitor and control: Common On/Off. Monitor: Common Error Codes. A relay can be driven under common fault conditions (if one or more indoor units are in faults). Ability to connect to Fire Alarm system. 12V/24VDC required for inputs. (Cable length < 1m). Option 1: 12V / 24VDC: Units On but “Centrally Controlled”. 0V: Units Off Option 2: 12V / 24VDC: Units Off and “Centrally Controlled”. 0V: Normal conditions. City Multi, Mr Slim and M Series (Via A2M Adaptor)
Page 110
Ex-stock
Dimensions: 80x45x80 City Multi and Mr Slim
Using CN52: Monitor fan motor or thermostat, cooling / dry and heating (Cable length < 1m). CN51 / CN52 available with City Multi. CN51 only available with Mr Slim
PAC-YG10HA-E
Stock
45
Monitor and control: On/Off. The On/Off remote controller button will NOT be disabled. 12V DC power supply required.
9
Using CN51: Monitor and control the indoor unit On/Off remotely with pulse signal. Also, monitor Error Codes. A relay can be driven under fault conditions.
Reference
Cost (£)
Reference
Details
PAC-SF81MA
A2M Adaptor
Cost (£) 116
Converter to MNET. Connect to outdoor unit. Dimensions: 130x15x90 Mr Slim ONLY
Page 111