GUARDIAN ® ULTRAMIRROR
BESCHREIBUNG UND ANWENDUNGEN GUARDIAN UltraMirror® is a high quality mirror offering durability and beautiful reflectance. The possibilities for decoration are unlimited: small and confined spaces become bigger, dark and dull rooms fill up with light. GUARDIAN UltraMirror is an ecologically friendly product exceeding all existing quality requirements set by the European mirror norm EN 1036.
EIGENSCHAFTEN ■ Appearance GUARDIAN Mirror is highly reflective and offers a true image reflectance. ■ Environmentally friendly It respects the environment with a copper-free manufacturing process and a reduced lead content protective paint (<0.5%). ■ Quality Copper-free manufacturing process enhances mirror protection against corrosion. It offers up to 3 times more protection than conventional mirror (in accordance with ISO 3770).
■ Moisture resistance If installation norm EN 1036 is respected, the mirror can be used in an environment where moisture is present (e.g. in a bathroom). ■ Scratch resistant It is also available in DiamondGuard® version, in which glass side is more resistant to scratches than ordinary float glass. ■ Safety GUARDIAN UltraMirror is available in two safety versions: UltraMirror Safety (with a protection film) and LamiGlass® Mirror (laminated mirror) for superior resistance and protection.
■ Heat resistance It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.
HANDHABUNG ■ Stocking As with float glass, GUARDIAN UltraMirror must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided. As ordinary mirror, it must be stored vertically. ■ Processing It can be cut on the glass side and used in different fabrication processes (drilling, grinding, etc.).
■ Installation Installation must be performed following installation norm EN 1036. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). ■ Cleaning It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product. Do not use any acid or alkali cleaners, the protective coating and the silver layer could be damaged.
VERFÜGBARKEIT The following sizes and thicknesses are available: ■ Sizes: 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions upon request); ■ Thicknesses: 3, 4, 5, 6 and 8mm (10mm is available upon request).
Disclaimer: This information is intended to provide general information about GUARDIAN UltraMirror and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.
GUARDIAN ® ULTRAMIRROR SAFETY
DESCRIPTION AND APPLICATIONS GUARDIAN UltraMirror® Safety has been developed to provide increased safety in interior applications. In case of breakage, the glass remains fixed to a safety film, reducing the chance of injury. GUARDIAN UltraMirror Safety is perfectly suited for decorative walls, wardrobe doors and furniture applications. This product can be applied in all interior decoration projects where safety standards are required (homes, offices, restaurants, hotels, shops, etc.).
PROPERTIE PROPERTIES S ■ Safety
■ Environmentally friendly
GUARDIAN UltraMirror Safety reduces the chance of injury and damage due to glass breakage by using a safety film that is designed to hold broken fragments together. Certified to the safety norm EN12600, class 3 for 4mm and class 2 for 6mm. ■ Quality
It respects the environment with a copper free manufacturing process and with a reduced lead content protective paint (<0.5%). ■ UV-sensitive It is designed to be used for interior applications only.
Copper free manufacturing process enhances mirror protection against corrosion. paint layer clear safety film
mirror
■ Heat resistance Can be used in environments up to 60°C. Proximity with a strong heat source must be avoided. ■ Moisture resistance If installation norm EN 1036 is followed, GUARDIAN UltraMirror Safety can be used in an environment where moisture is present (e.g. in a bathroom). ■ Scratch resistant It is also available in DiamondGuard® version, in which glass side is more resistant to scratches than ordinary float glass.
HANDLIN HANDLING G ■ Stocking As with typical mirror, GUARDIAN UltraMirror Safety must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided. ■ Processing Can be cut on the safety film and used in different fabrication processes (drilling, grinding, etc.).
■ Installation Installation must be performed following installation norm EN 1036. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). ■ Cleaning
It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.
AVAILABILIT AVAILABILITY Y The following sizes and thicknesses are available: ■ Sizes: 2250 x 3210 ; 2550 x 3210 and 3210 x 6000mm (other dimensions upon request); ■ Thicknesses: 4mm and 6mm.
Disclaimer: This information is intended to provide general information about GUARDIAN UltraMirror and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.
GUARDIAN ® LAMIGLASS MIRROR
DESCRIPTION AND APPLICATIONS GUARDIAN LamiGlass® Mirror has been developed by GUARDIAN to combine decoration and maximum safety. This product can be used for many applications as decorative walls, pilars and partitions, where the highest safety standards are required (shopping centres, schools, swimming pools, fitness centres, hospitals, etc.).
PROPERTIE PROPERTIES S ■ Environmentally friendly
■ Safety GUARDIAN LamiGlass Mirror offers increased protection against injury and damage in case of breakage. It is manufactured with polyvinyl (PVB) interlayer that is designed to hold broken glass fragments between the two panes of glass. The product is certified to the safety norm EN356, class P1A for 3.3.2 and P2A for 4.4.2. glass
double PVB opal
mirror
It respects the environment with a copper free manufacturing process. ■ Quality Copper free manufacturing protection against corrosion.
process
enhances
mirror
■ Heat resistance It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided. ■ Improved moisture resistance If the edges are appropriately protected, it resists against humidity.
Also available in Absolute Black and Polar White (other colours upon request): PVB Absolute Black
PVB Polar White
■ Scratch resistant It is also available in DiamondGuard® version, in which glass side is more resistant to scratches than ordinary float glass.
HANDLIN HANDLING G ■ Stocking As with float glass, GUARDIAN LamiGlass Mirror must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided. ■ Processing It can be used in different fabrication processes (drilling, grinding, etc.).
■ Installation It can be installed similar to standard glass with a neutral silicon (free of solvent) or a double-sided adhesive. ■ Cleaning
It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.
AVAILABILIT AVAILABILITY Y The following colours, sizes and thicknesses are available: ■ Colours: Available in Absolute Black and Polar White (other colours upon request); ■ Sizes: 2250 x 3210 and 2550 x 3210mm (other dimensions are available upon request); ■ Thicknesses: 3.3.2 (6,76mm) and 4.4.2 (8,76mm).
Disclaimer: This information is intended to provide general information about GUARDIAN LamiGlass Mirror and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.
GUARDIAN DIAMONDGUARD®
DESCRIPTION AND APPLICATIONS GUARDIAN DiamondGuard® is the only glass in the market that provides permanent scratch-resistance. Thanks to a unique and proprietary protective coating, the glass surface maintains its elegance longer. The product is ideal for interior decoration including: wall panels, sliding doors, partitions, table tops, shelving, furniture, shop furniture, doors, etc.
PROPERTIE PROPERTIES S ■ Improved scratch resistance GUARDIAN DiamondGuard coating offers to the glass a smoother and harder surface, with most materials simply sliding over it. The glass surface resists scratching from everyday items such as keys, bracelets, laptops, handbags, buttons, etc. ■ Durability and quality GUARDIAN DiamondGuard coating is not a removable plastic film, but a durable and permanent protective layer that is bonded to glass. GUARDIAN DiamondGuard works to retain the beauty of glass, resulting in products that last longer. ■ Appearance Is available on other GUARDIAN products including: LamiGlass®, DecoCristal®, UltraMirror® and UltraClearTM (low-iron glass). ■ Heat-resistance Contact with a strong heat source must be avoided. ■ UV-sensitive Is designed to be used for interior applications only. * Please notice that DiamondGuard coating is slightly coloured and can modify the final appearance of the product
HANDLIN HANDLING G ■ Stocking GUARDIAN DiamondGuard must not be stored outside. Storage should be in a dry and clean place, a suitable distance away from external doors and corrosive chemicals. Relative humidity in the warehouse should not exceed 70% and a minimum temperature of 15°C should be maintained in order to prevent condensation. ■ Processing
■ Maintenance
With its smooth surface GUARDIAN DiamondGuard is easy to clean. The protective coating is stable against attack from common acids and alkalis, it doesn’t require special cleaning product or coating replenishment. ■ Installation Can be installed with neutral silicon (free of solvent) or doublesided adhesive.
It can be used in different fabrication processes (drilling, grinding, etc.).
AVAILABILIT AVAILABILITY Y The following sizes and thicknesses are available: ■ Sizes: 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions are available upon request); ■ Thicknesses: 4, 5, 6, 8, 10, 12 and 15mm.
Disclaimer: This information is intended to provide general information about GUARDIAN DiamondGuard and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.
GUARDIAN SHOWERGUARD®
DESCRIPTION AND APPLICATIONS GUARDIAN ShowerGuard® is the first and only shower glass that provides permanent protection against corrosion and discoloration. GUARDIAN has developed a patented technology that seals the glass surface against corrosion, creating an easy-to-clean surface that will maintain its original appearance for years to come.
PROPERTIE PROPERTIES S ■ Easier to clean The surface of GUARDIAN ShowerGuard glass is treated with a patented ion-beam deposition process to seal the surface against attack from chemicals and shower contaminants, allowing your glass to remain smooth and easy to clean.
■ Smooth The protective coating provides to the glass a coefficient of friction being less than half that of standard float glass. This results in a much smoother surface than ordinary glass.
ShowerGuard doesn’t require special after-care products or coating replenishment. A soft cloth or a wet sponge is all you need for periodic maintenance. ■ Durability Unlike spray-on or wipe-on treatments that eventually come off, the coating on GUARDIAN ShowerGuard glass is permanent. So the shower can keep its original beauty for years to come. GUARDIAN ShowerGuard is covered by a 10-year warranty*.
CristalGuard Protected glass Exposed to typical Shower conditions
Unprotected shower Glass exposed to typical Shower conditions
■ UV-sensitive
New uncoated glass
ShowerGuard is designed to be used for interior applications only. ■ Heat-resistance Contact with a strong heat source must be avoided.
■ Colours Available on DecoCristal® Safety, a lacquered glass with a safety film that is certified to the safety norm EN1260.
* Details of the warranty on www.showerguardglass.com
HANDLIN HANDLING G ■ Stocking GUARDIAN ShowerGuard must not be stored outside. Storage should be in a dry and clean place, a suitable distance away from glass washers, external doors and corrosive chemicals. Relative humidity in the warehouse should not exceed 70% and a minimum temperature of 15°C should be maintained in order to prevent condensation. For more information please refer to the Fabricator User Guide (available upon request).
■ Processing Can be used in most common fabrication processes. Should be processed on the coated surface. For further information please use the Fabricator User Guide.
AVAILABILIT AVAILABILITY Y The following sizes and thicknesses are available: ■ Sizes: 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions are available upon request); ■ Thicknesses: 6, 8 and 10mm.
Disclaimer: This information is intended to provide general information about GUARDIAN ShowerGuard and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.
Guardian TM ULTRACLEAR
DESCRIPTION AND APPLICATIONS GUARDIAN UltraClearTM is manufactured using the latest advanced glassmaking technology. GUARDIAN UltraClear combines attractive aesthetics with technical benefits, its sheer beauty making it perfect for all interior and exterior designs. The stunning clarity of this product makes it the first choice for architecture (modern residences, offices, double-skin facades), interior design (window, doors, staircases) and industry (shop windows, display cases, aquariums, etc.)
PROPERTIE PROPERTIES S ■ Advantages GUARDIAN UltraClear takes natural light a step further. With higher transparency and a more neutral colour. The advantages are clear to the naked eye: Better visibility, higher clarity and unsurpassed elegance. ■ Safety It provides a dramatic improvement when used in laminated applications. Until now, the typical result when laminating conventional clear float glass was color distortion and a reduction of visible light transmission as the laminate thickness increased. GUARDIAN UltraClear’s combination of strength, security and distortion-free vision equals un-paralleled performance. Thickness (mm)
Light Transmission (%)
Light Colour Rendering Energy Reflection (%) Index (R3) Transmission (%)
Energy Energy Solar Reflection (%) Absorption (%) Factor g (%)
Shading Coefficient (SC)
UV Transmission (%)
2
92
8
100
91
8
1
91
1.05
85
3
91
8
100
90
8
1
91
1.04
83
4
91
8
100
90
5
91
8
100
90
8
1
90
1.04
81
8
2
90
1.04
79
6
91
8
100
89
8
3
90
1.03
77
8
91
8
100
89
8
4
89
1.03
74
10
91
8
100
88
8
4
89
1.02
71
12
90
8
99
87
8
5
88
1.01
69
All GUARDIAN Float Glass products comply with EN 572-2: 1994 ‘’Glass in Building - Basic Soda Lime Silicate Glass Products - Part 2: Float Glass’’ standards, and DIN 1249-10: 1990 ’’Glass in Building: Chemical and Physical Properties’’ standards. All light and energy values have been measured and calculated according to EN 410. All data are nominal values, subject to product tolerances, and without obligation.
HANDLIN HANDLING G ■ Processing Can be tempered, laminated and painted just like regular float glass and can be used in virtually all glass applications.
AVAILABILIT AVAILABILITY Y The following sizes and thicknesses are available: ■ Sizes: 2550 x 3210 & 3210 x 5100 (other dimensions upon request); ■ Thicknesses: On stock: 3, 4, 6, 8, 10 and 12mm.
Disclaimer: This information is intended to provide general information about GUARDIAN UltraClear and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.
GUARDIAN ® DECOCRISTAL
DESCRIPTION AND APPLICATIONS GUARDIAN DecoCristal® is a float glass that is lacquered with an opacified paint. It can be used in the widest range of interior decoration projects (e.g. commercial buildings, offices, hotels, homes, etc.) for applications such as partitions, sliding doors, kitchen furniture, tables, wardrobe doors, etc. GUARDIAN DecoCristal offers numerous possibilities (safety version, easy-to-clean shower glass, scratch resistant and personalised colours). It provides modern design and beauty in any decoration project.
PROPERTIE PROPERTIES S ■ Colours
■ UV-sensitive It is designed to be used for interior applications only.
The Essentials Black
White
3935/9005
1820/9003
Swan White 9010
■ Heat resistance Ice White 1240/9003
It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.
UltraWhite 1820/9003 LI (Low Iron)
■ Specific colour
The Naturals
GUARDIAN DecoCristal can also be personalised in the colour of your choice. ■ DecoCristal Safety
Black Grey
Shark Grey
0659
1230
True Bordeaux
Grey Brown 1250
3004
Caramel Brown
Wood Brown Grey Beige 2180
2410
1370
It is available with safety film. ■ DiamondGuard® DecoCristal®
The Brights
It is available in DiamondGuard® version, in which the coated side is more resistant to scratches than ordinary float glass.
Fluo Green
Red
Fluo Orange
3850
2085/3001
4115/2001
Silver
Metal Grey
3250/9022
9006
Fushia 4006 4105/5002
Purple Violet 1220/4007
Blue Luminous
Blue Lagoon 2080
■ ShowerGuard® DecoCristal® Available in ShowerGuard® version, an easy-to-clean shower glass that provides permanent protection against corrosion and discoloration. ■ SatinDeco® DecoCristal® It is also available in a mat version, on a satinated glass, for a soft and elegant appearance. Availability upon request.
These colours are indicative only, they don’t give an accurate reproduction of the range.
HANDLIN HANDLING G ■ Stocking As with typical float glass, GUARDIAN DecoCristal must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided. ■ Processing It can be cut the same way as mirror on the glass side and used in different fabrication processes (hole drilling, grinding, etc.).
■ Installation It cannot be installed on a humid wall. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). ■ Cleaning It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.
AVAILABILIT AVAILABILITY Y The following sizes and thicknesses are available: ■ Sizes: 2550 x 3210 (2250 x 3210, 3210 x 6000mm and other dimensions are available upon request); ■ Thicknesses: 4 and 6mm (3, 5, 8 and 10mm upon request). Disclaimer: This information is intended to provide general information about GUARDIAN DecoCristal and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.
GUARDIAN ® DECOCRISTAL SAFETY
DESCRIPTION AND APPLICATIONS GUARDIAN DecoCristal® Safety is a float glass lacquered with an opacified paint and strengthened by a clear safety film. In case of breakage, the glass remains fixed to the safety film, reducing the chance of injury. GUARDIAN DecoCristal Safety can be used in the widest range of interior decoration projects where improved safety standards are required (homes, offices, restaurants, etc.). Perfectly suited for decorative wall, wardrobe door and furniture application, it provides an optimal combination of modern design and safety.
PROPERTIE PROPERTIES S ■ Safety
■ Quality
GUARDIAN DecoCristal Safety reduces the chance of injury and damage due to glass breakage by using a safety film that is designed to hold broken fragments together. Certified to the safety norm EN12600, class 3 for 4mm and class 2 for 6mm. clear safety film
paint layer
glass
The safety film protects the paint layer from possible scratches. ■ UV-sensitive It is designed to be used for interior applications only. ■ Heat resistance It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided. ■ Improved moisture resistance The safety film offers an improved moisture resistance. ■ DiamondGuard® DecoCristal® The treated side is more resistant to scratches than ordinary float glass. ■ CristalGuardTM DecoCristal® An easy-to-clean shower glass that provides protection against corrosion and discoloration.
permanent
HANDLIN HANDLING G ■ Stocking As with typical float glass, GUARDIAN DecoCristal Safety must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided. ■ Processing It can be cut on the safety film and used in different fabrication processes (drilling, grinding, etc.).
■ Installation A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). For further information please reference the Processing Guidelines ■ Cleaning It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.
AVAILABILIT AVAILABILITY Y The following colours, sizes and thicknesses are available: ■ Colours: All the standard and custom colours; ■ Sizes: 2550 x 3210 (2250 x 3210, 3210 x 6000mm and other dimensions are available upon request); ■ Thicknesses: 4mm and 6mm (3, 5, 8 and 10mm upon request).
Disclaimer: This information is intended to provide general information about GUARDIAN DecoCristal Safety and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.
GUARDIAN SHOWERGUARD® DECOCRISTAL®
DESCRIPTION AND APPLICATIONS The combination of GUARDIAN ShowerGuard® DecoCristal® gives the first easy-to-clean coloured glass that represents an alternative to wall tiles. A unique lacquered glass that is permanently protected against hard water corrosion and discoloration and that reduces the chance of injury due to glass breakage by using a safety film on the back.
PROPERTIE PROPERTIES S ■ Standard colours
■ Easy to install
GUARDIAN ShowerGuard DecoCristal is always available in 4 fashion colours:
You can easily install this product with silicone and without a lot of cuts. ■ Safety
Grey Beige 2410
Caramel Brown 1370
Wood Brown 2180
Black Grey 0659
■ A more beautiful & clean shower The use of glass as wall covering in bathroom avoids the presence of seal where bacteria and dirt can accumulate. Besides, thanks to ShowerGuard, it is now very easy to maintain the shiny and glossy appearance of your glass, in the back of your shower or for the walls of your bathroom. Combined with ShowerGuard, DecoCristal coloured glass will keep its brightness and shiny colour for longer with minimal cleaning efforts. GUARDIAN ShowerGuard DecoCristal can be installed in all places which have direct or indirect contact with water or liquids (showers, sink, bathtube, toilets, etc.).
The polypropylene film brings the safety that is required in a bathroom. In case of breakage, the glass remains fixed to the safety film, reducing the risk of injury. The product is certified to the safety norm EN12600, class 3 for 4mm and class 2 for 6mm. ■ UV-sensitive GUARDIAN ShowerGuard DecoCristal is designed to be used for interior applications only. ■ Other colours* Black 3935/9005
Shark Grey 1230
Black Grey 0659
Grey Brown 1250
Metal Grey 9006
Silver 3250/9022
True Bordeaux 3004
Red 2085/3001
Fluo Orange 4115/2001
Fushia 4006
Purple Violet 1220/4007
Fluo Green 3850
Blue Luminous Blue Lagoon 4105/5002 2080
White 1820/9003
Swan White 9010
UltraWhite 1820/9003 LI (Low Iron)
* Availability of these colours upon request.
HANDLIN HANDLING G ■ Stocking As with typical float glass, GUARDIAN ShowerGuard DecoCristal must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided.
■ Processing It can be cut on the safety film and used in different fabrication processes (drilling, grinding, etc.).
AVAILABILIT AVAILABILITY Y The following sizes and thicknesses are available: ■ Sizes: 2550 x 3210 (2250 x 3210, 3210 x 6000mm and other dimensions are available upon request); ■ Thicknesses: 6mm (other thicknesses are available upon request).
Disclaimer: This information is intended to provide general information about GUARDIAN ShowerGuard DecoCristal and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.
GUARDIAN ® LAMIGLASS DECO
DESCRIPTION AND APPLICATIONS GUARDIAN LamiGlass® Deco is a product composed of two sheets of float glass bonded by one or several coloured PVB interlayers. GUARDIAN LamiGlass Deco brings colours, light and safety in the decorative and architectural world. It can be used in many applications: windows, decorative wall, ceiling, pillar, stairs etc. This product is suitable for exterior and interior, for public and private places, where the highest safety standards are required (shopping centres, universities, swimming pools, fitness centres, hospitals, etc.).
PROPERTIE PROPERTIES S ■ Safety
■ Appearance
GUARDIAN LamiGlass Deco offers increased protection against injuries and damages in case of breakage. It is manufactured with a highly resistant coloured PVB interlayer that is designed to hold broken glass fragments between the two panes of glass. The industrial procedure used to produce the PVB interlayer is subject to the strictest standards of quality control: EN ISO 9002. glass
coloured PVB interlayers
Also available with LamiGlass Mirror ®, SatinDeco®, DecoCristal® and UltraClearTM low-iron glass. ■ Colours There are 16 foundation colours, which can be combined (4 colours layers maximum) or used separately. Thus GUARDIAN is able to personalize GUARDIAN LamiGlass Deco in the colour of your choice, there are over 3.000 transparent, translucent or opaque colour options*.
glass
Coral Rose 0001
Aquamarine 0002
Smoke Grey 0003
Sahara Sun 0004
Ruby Red 0005
Sapphire 0006
Evening Shadow 0007
Golden Light 0008
Arctic Snow 0009
Cool White 000A
Deep Red 000C
True Blue 000D
Tangerine 000E
Polar White 000H
Absolute Black 000G
Ocean Grey 000H
These colours are indicative only, they don’t give an accurate reproduction of the LamiGlass Deco range.
■ Uses
■ Acoustic properties This product can also be combined with GUARDIAN LamiGlass Acoustic.
Perfect for decorative uses both inside and outside.
* Light coloured PVB as Sahara Sun or Golden Light have to be protected by another PVB, clear or coloured
HANDLIN HANDLING G ■ Stocking GUARDIAN LamiGlass Deco must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided.
■ Installation It can be installed similar to standard glass with a neutral silicon (free of solvent) or a double-sided adhesive. ■ Cleaning
■ Processing It can be used in different fabrication processes (drilling, grinding, etc.).
It can be easily washed using a clean cloth with a standard and nonabrasive glass-cleaning product.
AVAILABILIT AVAILABILITY Y The following sizes and thicknesses are available: ■ Sizes: 2400 x 3210 mm (other dimensions are available upon request); ■ Thicknesses: 3+3, 4+4, 5+5, 6+6, 8+8 and 10+10 (12+12 only in: 1800 x 3210 mm).
Disclaimer: This information is intended to provide general information about GUARDIAN LamiGlass Deco and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process
GUARDIAN ® SATINDECO
DESCRIPTION AND APPLICATIONS GUARDIAN SatinDeco® is an acid-etched glass that offers an excellent surface finish, making it very easy to clean. Thanks to its elegant appearance and great versatility, this glass is ideal for a wide range of applications including: windows, doors, floors, homes, offices, hotels, public buildings, shops, etc. GUARDIAN SatinDeco has become a key product in modern day decoration creating a elegant, clear and bright environment.
PROPERTIE PROPERTIES S ■ Appearance and Quality GUARDIAN SatinDeco has an excellent silky finish. It disperses the light and transforms the transparent float into a translucent glass. ■ Uses Perfect for decorative applications indoor and outdoor. ■ Easy to clean With its smooth surface the product is easy to clean and helps to prevent finger prints. ■ Environment GUARDIAN SatinDeco manufacturing line includes the most advanced technology to treat any waste product that is derived from the manufacturing process. ■ SatinDeco Vidromat A maximum amount of light transmission with a slight acid etch finish that reduces glare and promotes distortion free vision.
■ SatinDeco Elegance An acid-etched glass even smoother than the original, which provides a more subtle aesthetic with parallel performance. ■ SatinDeco Inspiration Ideal for picture frames, inspiration achieves a high quality antireflective surface that significantly reduces glare. ■ DecoCristal® & SatinDeco Can also be lacquered with a coloured and opacified organic paint. Available in all the standard DecoCristal colours and even in the colour of your choice. Availability upon request. ■ LamiGlass® & SatinDeco Can be laminated with PVB available in acoustic version and in different colours. ■ Other combinations GUARDIAN SatinDeco is also available on UltraMirror®, UltraClearTM low-iron glass and in Double Side.
HANDLIN HANDLING G ■ Stocking GUARDIAN SatinDeco must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided. ■ Processing Can be cut and used in different fabrication processes (drilling, grinding, etc.). The product can also be tempered (flat or curved), painted or printed, laminated, mirror-coated, etc.
■ Installation Similar to standard glass, it can be installed with neutral silicon (free of solvent) or double-sided adhesive. Once installed, it does not require any special attention. ■ Cleaning
Can be easily washed using a clean cloth with a standard and nonabrasive glass cleaning product.
AVAILABILIT AVAILABILITY Y The following thicknesses and sizes are available: ■ Sizes: 1800 x 3210, 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions available upon request); ■ Thicknesses: 3, 4, 5, 6, 8, 10, 12 and 15mm (19mm is available upon request); The thicknesses available for DecoCristal & SatinDeco: 3, 4, 6 and 8mm; The compositions available for LamiGlass & SatinDeco: 3+3, 4+4, 5+5, 6+6, 8+8, 10+10, 12+12 and 15+15. Disclaimer: This information is intended to provide general information about GUARDIAN SatinDeco and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.
G UARDIAN GLASS INTERIOR COLLECTION Sizes (mm x mm)
Thicknesses (mm)
2550 x 3210
4 and 6
Other dimensions upon request
Other thicknesses upon request
2550 x 3210
4 and 6
Clear safety film
Other dimensions upon request
Other thicknesses upon request
Clear
2250 x 3210 2550 x 3210 3210 x 6000
Products
Colours
DecoCristal
Standard colours: Black, White, Swan White, Ice White, UltraWhite, Black Grey, Shark Grey, True Bordeaux, Grey Brown, Caramel Brown, Wood Brown, Grey Beige, Fluo Green, Red, Fluo Orange, Fushia, Purple Violet, Blue Luminous, Blue Lagoon, Metal Grey, Silver or custom colours
®
DecoCristal® Safety
DiamondGuard®
All the standard colours or custom colours
Other dimensions upon request
LamiGlass® Deco
Foundation colours: Coral Rose, Aquamarine, Smoke Grey, Sahara Sun, Ruby Red, Sapphire, Evening Shadow, Golden Light, Arctic Snow, Cool White, Deep Red, True Blue, Tangerine, Polar White, Absolute Black or custom combinations
LamiGlass® Mirror
Opal, Absolute Black, Polar White (LamiGlass Deco colours upon request)
2400 x 3210 Other dimensions upon request
2250 x 3210 2550 x 3210
4, 5, 6, 8, 10, 12 and 15
3+3, 4+4, 5+5, 6+6, and 8+8 Other thicknesses upon request
33.2 (6.76mm) 44.2 (8.76mm)
3, 4, 5, 6, 8, 10, 12 and 15; 19 upon request SatinDeco®
ShowerGuard®
UltraClearTM
UltraMirror®
Translucent
2400 x 3210
LamiGlass Deco and DecoCristal colours
Other dimensions upon request
Clear DecoCristal colours
Clear
Blue paint (backside)
2250 x 3210 2550 x 3210 3210 x 6000
Blue paint (backside) Clear safety film
6, 8 and 10
Other dimensions upon request
3210 x 5100 2550 x 3210
2250 x 3210 2550 x 3210 3210 x 6000 Other dimensions upon request
UltraMirror® Safety
Compositions for laminated SatinDeco: 3+3, 4+4, 5+5, 6+6, 8+8, 10+10, 12+12 and 15+15
2250 x 3210 2550 x 3210 3210 x 6000 Other dimensions upon request
4,6,8,10 and 12 Other thicknesses upon request
3, 4, 5, 6 and 8 10 upon request
4 and 6
Compatibility with other products (other compositions can be considered on demand)
Certifications
DiamondGuard, Safety version, SatinDeco, UltraClear
DiamondGuard, SatinDeco, ShowerGuard, UltraClear
Safety norm EN 12600, class 3 for 4mm and class 2 for 6mm
DecoCristal, LamiGlass, UltraClear, UltraMirror
DiamondGuard, LamiGlass Acoustic, SatinDeco, ShowerGuard, UltraClear, UltraMirror
DiamondGuard, LamiGlass Deco, SatinDeco, ShowerGuard
Safety norm EN 356, class P1A for 33.2 and P2A for 44.2
Safety norm EN 356, Class P1A for 33.2 and P2A for 44.2
DecoCristal, LamiGlass, SatinDeco (Double Side), UltraClear, UltraMirror
DecoCristal Safety, LamiGlass, UltraClear, UltraMirror DecoCristal, DiamondGuard, LamiGlass, SatinDeco, ShowerGuard DiamondGuard, LamiGlass, Safety version, SatinDeco, UltraClear
European mirror norm EN 1036 ISO 3770
DiamondGuard, SatinDeco, ShowerGuard, UltraClear
Safety norm EN 12600, Class 3 for 4mm and Class 2 for 6mm
Š 2012 Guardian Industries Corp.