Usermode Commands Command
Sl. No.
Comments, if any.
1
disconnect
Terminates the suspended telnet session and then logout it.
2
enable
-
3
ping <host-name>
Used to tests the connectivity.It uses ICMP to initiate the connection.
4
ping <ip-address>
-
5
traceroute <hostname>
Lists all routers along path to destination and finds the routing problems if any.
6
traceroute <ip-address>
-
Privileged Mode Commands Command
Sl. No.
Comments, if any.
1
clear arp-cache
-
2
configure terminal
Allows to execute commands that change the router's configuration.
3
copy running-config startup-config
It saves the active configuration of the router.
4
copy startup-config running-config
5
debug ip packet
6
disable
Returns to the UserEXEC mode from Privilege mode.
7
disconnect <TELNET_ID>
-
8
erase startup-config
Deletes all the configuration files present on a router.
9
logout
It exits router from the user or privilege mode.
10
ping <host-name>
Used to tests the connectivity.It uses ICMP to initiate the connection.
11
ping <ip-address>
12
reload
13
resume <TELNET_ID>
14
show access-list
Displays all accesslists from all protocols present in a specified router.
15
show banner
-
16
show cdp
Shows the status of CDP such as holdtime value,no.of packets for every 60sec.
-
-