141
No. 141 Pipe & Conduit Geared Threader
Capacity: 21/2", 3", 31/2", & 4"
12
†11 9
1
13
10
25
8
14
7 5
†6
24
4 16 15 23
2 3
17
22
18 26
21 27 20
28
19
29 37 30 31 (Must be mounted with part number stamping against Selector Plate)
36
35
32 33
38
34 Pipe Dies (See Table)
25
NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number. Ref. No. 1 2 3 4 5 †6 7 8 9 10 †11 12 13
Catalog No. 39360 39810 39815 39605 39695 39465 39615 39825 39620 39625 39470 39585 29056 39795 29046
Description Pinion Shaft Assembly Wear Plug Spring Pinion Shaft Retaining Collar Split Ring Drive Shaft Pressure Ring Pinion Sleeve Pressure Pin (3) Pinion Shaft Ring Pinion Shaft with Gear Wrench Wrench (Europe Hex-Key) Clamp Screw with Clip Clamp Screw with Clip (Europe)
Ref. No. 14 15 16 †17 18 19 20 21 22 23 24 25 26
Catalog No. 39345 39835 46870 32755 58720 39330 68020 39650 39200 39195 68040 39100 39455 32275 39730
Description Workholder Jaw (3) Name Plate Drive Screw (4) Nylon Plug Set Screw NPT Guide Post BSPT Guide Post Guide Post Screw Gear Case NPT Workholder BSPT Workholder Workholder Scroll Retaining Ring Screw (16) Gear Case Spring Ring
Ref. No. 27 28 29 30 31 32 33 34 35 36 37 38
Catalog No. 39320 68090 39185 39190 39110 39790 39830 39655 39645 44925 39750 39690 39640 39180 39175
Description NPT Threaded Barrel BSPT Threaded Barrel NPT Selector Plate BSPT Selector Plate Selector Plate f/Cast Iron Stop Screw Guide Block Screw Guide Block Knob (2) Pin (2) Die Pins & Clips Spring (2) Locating Pin (2) Cam Plate Head
Service Notes: (Ref. No. 6) (Ref. No. 11) Early Models incorporating 39600/E-1936 Pinion Shaft and 3590/E-1935-1 Drive with 39630/E-1945-1 Centering Pin can be updated by using new style Pinion Shaft or new style Drive Shaft and discarding Centering Pin. (Ref. No. 17) Nylon Plug should be replaced anytime Pinion Shaft Assembly (Ref. No. 1) is removed from Gear Case.
Ridge Tool Company/Elyria, Ohio, U.S.A.
17