Page 1


Flap Discs – USA Made C3 Ceramic – Page 12

NEW PRODUCTS

C3 Ceramic Flap Discs – Top in Removal

Competitor B-1

440

Competitor B-2

500

CGW C3

Free Samples Available 570

0

100

200

300 400 Grams Removed

500

600

*Based off 3rd party testing over a 30 minute time period. Competitor B-1 scratched the material.

Z3 Trimmable – Page 13 5" Z3 Ultimate – Page 16 5" Z3 XXL – Page 17 Z-Poly Cotton (PCE) – Page 20 Z-Flex XL – Page 21

Semi-Flex & Quick Change Discs 4-1/2" Economy Semi-Flex Discs – Page 27 C3 Ceramic Quick Change Discs - Roll-On & Turn-On – Page 34, 36 2-3" Quick Change Discs - Zirconia AO w/Grinding Aid, Turn-On – Page 36

Flap Wheels Non-Woven Flap Wheels – Page 43, 62 Flap Wheel Drums – Page 44-45 Unmounted Flap Wheels – Page 46

Shop Rolls & Belts Shop Rolls – Page 47 Belts – Page 48-56 Convolute Wheels – Page 58-59 Unitized Wheels – Page 60-61

2

Samples Available for Testing – Contact CGW for Details


Cut-Off Wheels

NEW PRODUCTS

Quickie Cut EXTREME Cut-Off Wheels – Page 72-73 Contaminate-Free Quickie Cut EXTREME Cut-Off Wheels – Pages 74-75 3-in-1 Wheels - Cut/Grind/Finish – Pages 77 Tile, Ceramic & Marble Depressed Center Wheels – Pages 83 ULTRA 1/8" Depressed Center Wheels - ZA24T – Pages 78 Fast Cut 2-4" Cut-Off Wheels - Type 1 – Pages 85 Fast Cut 12-14" High Speed Wheels – Pages 92

Carbide Burs – USA Made Carbide Burs – Page 94-99

Wire Brush Wire Brush – Page 100-109

Surface Grinding Wheels Porous Surface Grinding Wheels – Page 119

Point-Of-Purchase Display Flexible Point-Of-Purchase Display – Page 121

Samples Available for Testing – Contact CGW for Details

3


ANALYSIS OF TYPICAL WHEEL SPECIFICATIONS

Analysis of Typical Wheel Specifications

MAX 13,300 RPM

CGW Resin Abrasive Types

CGW Coated Abrasive Types

A – Dark Aluminum Oxide: The most common of all grains. This grain is used for heavyduty general purpose work. C – Silicon Carbide: Aggressive cutting and grinding of stone, concrete, marble, and other non-metallic materials. WA – White Aluminum Oxide: The high friability of this grain gives it the characteristic of fast and cool cutting used for light grinding of steels of all kinds, particularly on tool and stainless steel. ZA – Zirconia Aluminum Oxide: An improvement over basic aluminum oxide grain. Zirconia grain is sharper and easily fractures for faster cutting and longer life.

C3 – Ceramic: Self-sharpening ceramic grain. Grain lasts longer than zirconia for aggressive cutting CONTAMINATE-FREE Iron, Sulfur, and action on hard-to-grind materials. Chlorine 0.1% Z3 – Zirconia Alumina: Premium grain for heavy duty applications and longer working life. Contains an active CONTAMINATE-FREE grinding agent for cool cutting. Contaminate- Iron, Sulfur, and Chlorine 0.1% free results; stainless steel won't rust. A3 – Aluminum Oxide: Premium blue fired grain for quick stock removal. Contains an active grinding agent for cool cutting.

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Grain Size

Coarse: 8, 10, 12, 14, 16, 20, 24 Med: 30, 36, 46, 54, 60 Fine: 80, 100, 120, 150, 180 Very Fine: 220, 240, 280, 320, 400, 600 Grade

Soft: B, D, E, F, G, H Med: I, J, K, L, M, N, O, P Hard: Q, R, S, T, U, V, W, X 4

Samples Available for Testing – Contact CGW for Details


Table Of Contents Analysis Of Typical Wheel Specifications . . . . . . . . . . . . 4 Table Of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Backup Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Quick Change Laminated Discs . . . . . . . . . . . . . . . . 34-38 C3 Ceramic Roll-On & Turn On Discs . . . . . . . . . . . . 34, 36 Flap Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-43 Non-Woven Flap Wheels . . . . . . . . . . . . . . . . . . . . . .43 Metal Surface Flap Wheel Drum Sander. . . . . . . . . . .44 Flap Wheel Drums . . . . . . . . . . . . . . . . . . . . . . . 44-45 Unmounted Flap Wheels . . . . . . . . . . . . . . . . . . . . . .46 Shop Rolls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Abrasive Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-56 File Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-50 Portable, Benchstands & Backstand Belts . . . . . . . . 51-56

Surface Conditioning . . . . . . . . . . . . . . . 57-68 Convolute Wheels . . . . . . . . . . . . . . . . . . . . . . . . . 58-59 Unitized Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . 60-61 EZ Strip Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . 62-63 Hook and Loop Discs . . . . . . . . . . . . . . . . . . . . . . . 64-65 Hand Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Interleaf Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Quick Change Surface Conditioning Discs . . . . . . . . . . . .67 Non-Woven Flap Wheels . . . . . . . . . . . . . . . . . . . . . . .68 Surface Conditioning Flap Discs . . . . . . . . . . . . . . . . . .68

Resin Bonded Wheels . . . . . . . . . . . . . . 69-93 Quickie Cut Cut-Off Wheels . . . . . . . . . . . . . . . . . . 71-76 EXTREME Quickie Cut Cut-Off Wheels . . . . . . . . . 72-73 Super Quickie Cut Cut-Off Wheels . . . . . . . . . . . . 72-73 Contaminate-Free Quickie Cut Cut-Off Wheels . . . . . . .74-75 Contaminate-Free EXTREME Quickie Cut Cut-Off Wheels .74-75 Contaminate-Free Super Quickie Cut Cut-Off Wheels . .74-75 Quickie Cut 3/32" (.094/2.5mm) Cut-Off Wheels . . . .76 3-in-1 Wheels .094 - Cut/Grind/Finish . . . . . . . . . . . .77 Super Quickie Cut .075 Cut/Grind . . . . . . . . . . . . . . .77 Depressed Center Wheels . . . . . . . . . . . . . . . . . . . 78-83 1/8" Cutting/Notching. . . . . . . . . . . . . . . . . . . . . . . .78 1/8" Pipeline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 1/4" Grinding . . . . . . . . . . . . . . . . . . . . . . . . . . . 80-81 Aluminum & Concrete . . . . . . . . . . . . . . . . . . . . . .83 1/8" FGF Wheels – Flex, Grind, Finish . . . . . . . . . . . .82 High-Speed Cut-Off Wheels . . . . . . . . . . . . . . . . . . 84-85 Circular Saw Cut-Off Wheels . . . . . . . . . . . . . . . . . . . .86 Stationary Saw Cut-Off Wheels . . . . . . . . . . . . . . . . 86-87 Chop Saw Wheels . . . . . . . . . . . . . . . . . . . . . . . . . 88-89 12-16" High-Speed Cut-Off Wheels . . . . . . . . . . . . . 90-91 Fast Cut 12-14" High-Speed Cut-Off Wheels . . . . . . . . .92 14-16" Rail Track Cutter Wheels . . . . . . . . . . . . . . . . .92 Resin Cups Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . .93

TABLE OF CONTENTS

Coated/Surface Conditioning Products . . . 6-68 Flap Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25 C3 Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Z3 Trimmable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Z-Poly Cotton Economy (PCE) . . . . . . . . . . . . . . . . . .20 Surface Conditioning Discs . . . . . . . . . . . . . . . . . . . . . .26 Semi-Flex Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Resin Fibre Discs . . . . . . . . . . . . . . . . . . . . . . . . . 28-31

Carbide Burs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94-99 Wire Brush. . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-109 Bench & Pedestal Wheels . . . . . . . . . . . . . . . . . 110-113 Surface Grinding Wheels . . . . . . . . . . . . . . . . . . 114-118 Porous Surface Wheels . . . . . . . . . . . . . . . . . . . . . . .119 Mounted Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 Merchandisers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121 Product Index . . . . . . . . . . . . . . . . . . . . . . . . . . 122-123

*Products released since January 2008 are categorized as NEW.

Samples Available for Testing – Contact CGW for Details

5


USA MADE FLAP DISC

USA MADE FLAP DISCS

Right Angle Grinder

CGW Offers the Most Extensive Line of Flap Discs in the Marketplace CGW flap discs blend and finish in one operation which replaces the traditional twostep grinding process of T27 grinding wheels and sanding discs. Flap discs provide a more consistent finish. CGW flap discs reduce processing time which increases productivity for lower parts finishing costs and provides an overall cost savings. CGW flap discs are engineered for full use of the coated abrasive material. Layering the abrasive cloth flaps allows the discs to wear evenly which constantly exposes new sharp grain. CGW’s flap disc program contains fully consumable fiberglass and rigid aluminum backings. CGW Program Features Bonding system: CGW uses a resin bond developed especially for flap disc applications which withstands the high temperatures that develop when a flap disc is in action – on average 16,000 SFPM (surface feet per minute). This strong bond provides for longer grain retention and leads to better stock removal and longer life. Backing system: The water resistant polyester-cloth (C3, A3, Z-Stainless, Aluminum) or poly-cotton (Z3, Z-PCE, Z-THRU) backing provides greater strength for grain retention, low stretch, and is tougher than typical cotton cloths. CGW also offers the cotton backed Z-Flex for applications that require maximum flexibility. Multiple Grains: CGW offers multiple grain options; the right grain for the work at hand. Diameters: Available in 2" – 7" Grits: 24 – 120 Design Type (Shape): Type 27, Type 29 and Compact (see illustrations on page 7) 4-1/2" Z3 has five disc densities: Regular, Compact, Ultimate, XL, and XXL (see page 8). Compact and Ultimate have 20-25% more material than regular. XL and XXL have 35-80% more material than regular. 5/8-11 hub available for 4-1/2" – 7" flap discs. 4" has 3/8-24 available. 6

Samples Available for Testing – Contact CGW for Details


FEATURES & BENEFITS CGW – USA Flap Disc Market Leader

USA MADE FLAP DISCS

XL40 – The Production Grinding Workhorse TASK APPLICATION

RECOMMENDED FLAP DISC

SIZES AVAILABLE

Metal/Weld Removal

Z3 / C3

4, 41/2, 5, 6, 7

Stainless Steel

Z-Stainless / Z3 / C3

Z3 - 4, 41/2, 5, 6, 7 Z-Stainless - 41/2, 5, 7

Precise Welds

Z-THRU

41/2, 5

Aluminum

Aluminum / A3

A3 - 4, 41/2, 5, 7 Aluminum - 41/2, 5, 7

Non Ferrous Metals/Soft Metals

A3

4, 41/2, 5, 7

What Type (Shape) Of CGW Flap Disc To Use 0°-15°

Smooth Finishing

15°- 25°

Most Aggressive

5°- 20°

Edge Strength

T-27/Flat - For working on flat grinding surfaces. Most efficient when used between 0°-15° angle. The best choice for smooth finishing. T-29/Conical - For working on contoured and edge work. Flaps are angled at 8 degrees for greater surface contact and aggressive use. Best used at 15°-25° angle. Hybrid/Compact - For working on rough edge work. Flaps are compressed at a 4 degree angle for flap edge strength. All items marked compact in name use this backing plate. Best used at 5°-20° angle.

Samples Available for Testing – Contact CGW for Details

7


USA MADE FLAP DISC

USA MADE FLAP DISCS

CGW XXL Z3 Flap Discs Outgrind the Competition*

CGW XXL Z3 Flap Disc

Top Competitor Flap Disc 1/3 less life

* Each 40 grit flap disc was tested on carbon steel for one 5-minute cycle.

CGW 41/2 Z3 Flap Disc Comparison

5 Material

Configurations

Flap Disc Type

Regular (pg 14-15) – Fast removal rate for aggressive use and heavy duty applications. Compact (pg 17) – Hybrid compact disc design – Flaps are compressed and compacted at a 4 degree angle. 20% more material than regular Z3 flap discs.

Edge Grinding

Ultimate (pg 16) – Z3 Ultimate flap discs have fewer flaps than Z3 XL flap discs which allows the material to further spread out reducing heat generation for easier break down compared to XL discs.

Flexible for Finish Work

Production grinding

XL (pg 14-15) – Approximately 35-55% more material than regular Z3 flap discs.

XXL (pg 17) – 10-20% more material than XL flap discs. Extra wide flaps for longer working life.

80% More Note: 40 grit discs shown

8

Samples Available for Testing – Contact CGW for Details


FEATURES & BENEFITS Flap discs are used for rough grinding and finishing in one step. ■

Replaces the combined work of grinding wheels and fiber discs.

CGW Flap Discs vs. Grinding Wheels ■

Faster Stock Removal – No gouging and smooth finish. Cooler Performance – Less glazing and loading. Less re-work. Consistent Finishing – Easier to control for better quality and no discoloration. Easier Operation – Lightweight, layered design has a cushioning effect for reduced operator fatigue and reduced noise and vibration.

USA MADE FLAP DISCS

ingry w o Gr tego t s e Ca t Farsasive Ab

CGW Flap Discs vs. Resin Fibre Discs ■

20 Times Longer Life – Longer working life for great cost savings. Self-Sharpening Action – More consistent finishes. Easier Storage – No problems with humidity. No Back-Up Pad Needed – Reinforced phenolic fiberglass backing wears away with the flaps. No marring, unlike plastic or aluminum backings.

CGW Flap Discs Only vs. Grinding Wheels + Resin Fibre Discs ■

■ ■ ■

Faster stock removal, less gouging, reduced operator fatigue, and longer life Intermediate and finishing of welds All ferrous and non-ferrous materials Deburring, deflashing, rust removal and snagging Surface finishing, blending and stock removal Cleaning and finishing

Samples Available for Testing – Contact CGW for Details

9


LABORATORY RESULTS Flap Disc Performance Comparatives

LABORATORY RESULTS

Flap Disc Specimens

Disc Disc Disc Disc

#1: #2: #3: #4:

CGW A3 Material 7"x7/8" 40 Grit (A/O material), Type 29, Regular Density CGW Z3 Material 7"x7/8" 40 Grit (A/Z material), Type-29, Regular Density CGW Z-Stainless Material 7"x7/8" 40 Grit (A/Z material), Type-29, Regular Density Competitor’s Material 7"x7/8" 40 Grit (A/Z material), Type-29, Regular Density Power Tool Source

Bosch GWS 20-80, 2KW, 8,500 RPM Right Angle Grinder Test Parameters

Engagement load of power tool: Angle of disc contact: Rotation and speed of material: Measurement criteria:

11 lbs. vertical force 10 degrees (disc automatically changes its tilt, left to right, 5 times/minute) Clockwise @ 21 RPM Each disc was tested for six 5-minute grinding cycles, totalling 30 minutes. After each 5-minute cycle the disc and material was weighed to determine weight loss during cycle. “G” Ratio

The “G” Ratio is the number of grams removed (material) per gram of abrasive cloth (disc) lost during test.

Carbon Steel Test Test Material

1010 Carbon Steel Tubing – 5/16" wall thickness

0

250

500

750

0

250

500

750

1000

1250

1500

0

1250

1500

0

35

Conclusion 1000

CGW Z3 flap discs have a 36.6% stock removal advantage and a +13.9% “G” ratio compared to competitor’s material. Having a superior stock removal rate coupled with a cost of labor savings make the CGW Z3 flap disc the top choice for carbon steel applications.

35

Stainless Steel Test Test Material

316 Stainless Steel Tubing – 3/16" wall thickness

0

100

200

300

400

500

600

0

15

0

100

200

300

400

500

600

0

15

Conclusion

CGW Z-Stainless flap discs have a significant +56.1% stock removal rate and a +40.6% “G” ratio compared to competitor’s material. Utilizing a grinding aid that reduces heat and lubricates the grain during operation, the CGW Z-stainless flap disc is the superior choice for stainless steel applications.

10


USA MADE FLAP DISCS

11


USA MADE FLAP DISCS – C3 CERAMIC

C3 CERAMIC FLAP DISCS C3 Ceramic

USA Made Flap Discs Description and Applications ■

■ ■

Self-sharpening ceramic grain and cool grinding aid for fast, aggressive cutting action on hard-to-grind materials. Ceramic flap discs are designed to last longer than zirconia flap discs. Polyester backing material for longer working life. Ceramic grain provides Contaminate-Free results; stainless steel won’t rust. Hybrid Compact design (4-1/2" and 5") – Flaps are compressed and compacted at a 4 degree for edge strength. For steel and stainless and other heat sensitive materials.

ive s esing r g AgCutt Side View

CERAMIC

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

C3 Ceramic Compact SIZE

GRIT

RPM

CARTON QTY

COMPACT REGULAR UPC#

COMPACT XL UPC#

41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 5/8-11 5 x 5/8-11 5 x 5/8-11 5 x 5/8-11

36 40 60 80 36 40 60 80 36 40 60 80 36 40 60 80

13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

42401 42402 42404 42405 42411 42412 42414 42415 42601 42602 42604 42605 42611 42612 42614 42615

42441 42442 42444 42445 42451 42452 42454 42455 42641 42642 42644 42645 42651 42652 42654 42655 XL Requires high output angle grinders for best results.

C3 Ceramic SIZE

7x / 7 x 7/8 7 x 7/8 7 x 7/8 7 x 5/8-11 7 x 5/8-11 7 x 5/8-11 7 x 5/8-11 7 8

12

GRIT

36 40 60 80 36 40 60 80

RPM

8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600

CARTON QTY

REGULAR T27 UPC#

REGULAR T29 UPC#

10 10 10 10 10 10 10 10

42801 42802 42804 42805 42811 42812 42814 42815

42821 42822 42824 42825 42831 42832 42834 42835

Samples Available for Testing – Contact CGW for Details


Z3 Trimmable Flap Discs USA Made Flap Discs

Description and Applications ■

Trimmable Z3 flap disc backing easily trims down to expose flaps for extended working life. The trimmable backing allows for longer production times since wheels aren’t changed as often. Premium Zirconia Alumina grain with a poly/cotton heat treated backing. The poly/cotton combination provides low stretch and strength for the high Zirconia concentration that Z3 contains. Active grinding agent provides cool cutting with light pressure. Z3 material is recommended for aggressive use and heavy duty applications. Hybrid compact design - flaps are compressed and compacted at a 4 degree for edge strength. 20% more material than regular Z3 flap discs.

ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

Compact Z3 Trimmable Flap Discs SIZE

4/ x / 41/2 x 7/8 41/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 1 2

7 8

GRIT

RPM

CARTON QTY

UPC#

40 60 80 40 60 80

13,300 13,300 13,300 12,200 12,200 12,200

10 10 10 10 10 10

39722 39724 39725 39742 39744 39745

Backing Plate Side

USA MADE FLAP DISCS – TRIMMABLE FLAP DISCS

Z3 TRIMMABLE FLAP DISCS

Material Side

Before

After

To trim down the backing simply grind the backing edge against a metal edge until the flaps are exposed to the level needed. Samples Available for Testing – Contact CGW for Details

13


USA MADE FLAP DISCS – PREMIUM Z3

Z3 –

SELLING FLAP

Premium Z3

USA Made Flap Discs Description and Applications ■

Fastest grain removal in the marketplace for carbon based steels (26% more than the competition) and second best after CGW Z-Stainless discs on stainless steels, while offering excellent life. Recommended for aggressive use and heavy duty applications. Active grinding agent provides cool cutting with light pressure. Special optimized resin bond offers maximum cutting capacity, strong edge stability and long life. Premium Zirconia Alumina grain with a poly/cotton heat treated backing. The poly/cotton combination provides low stretch and strength for the high Zirconia concentration that Z3 contains.

ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Regular

Right Angle Grinder

XL

Premium Z3 SIZE

GRIT

RPM

CARTON QTY

4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 3/8-24 4 x 3/8-24 4 x 3/8-24 4 x 3/8-24 4 x 3/8-24 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11

24 36 40 60 80 120 36 40 60 80 120 24 36 40 60 80 120 24 36 40 60 80 120

15,300 15,300 15,300 15,300 15,300 15,300 15,300 15,300 15,300 15,300 15,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

SM: Size/specification available as special make wheel. 100 piece minimum order.

14

#1 PERFORMER ON CARBON #2 PERFORMER ON STAINLESS

Thickness REGULAR T27 UPC# T29 UPC#

Thickness XL T27 UPC# T29 UPC#

42101 42102 42103 42104 42105 42106 42111 42112 42114 42115 42116 42300 42301 42302 42304 42305 42306 42310 42311 42312 42314 42315 42316

NA SM 42142 42144 42145 42146 SM 42152 42154 42155 42156 SM 42341 42342 42344 42345 42346 SM 42351 42352 42354 42355 42356

42120 42121 42122 42124 42125 42126 42131 42132 42134 42135 SM 42320 42321 42322 42324 42325 42326 42330 42331 42332 42334 42335 42336

NA 42161 42162 42164 42165 SM SM SM SM SM SM SM 42361 42362 42364 42365 42366 SM 42371 42372 42374 42375 42376

XL Requires high output angle grinders for best results.

Samples Available for Testing – Contact CGW for Details


DISC MATERIAL SIZE

GRIT

RPM

CARTON QTY

5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 5/8-11 5 x 5/8-11 5 x 5/8-11 5 x 5/8-11 5 x 5/8-11 5 x 5/8-11 6 x 7/8 6 x 7/8 6 x 7/8 6 x 7/8 6 x 5/8-11 6 x 5/8-11 6 x 5/8-11 6 x 5/8-11 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 5/8-11 7 x 5/8-11 7 x 5/8-11 7 x 5/8-11 7 x 5/8-11 7 x 5/8-11

24 36 40 60 80 120 24 36 40 60 80 120 36 40 60 80 36 40 60 80 24 36 40 60 80 120 24 36 40 60 80 120

12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 10,200 10,200 10,200 10,200 10,200 10,200 10,200 10,200 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

SM: Size/specification available as special make wheel. 100 piece minimum order.

Thickness REGULAR T27 UPC# T29 UPC#

Thickness XL T27 UPC# T29 UPC#

42500 42501 42502 42504 42505 42506 42510 42511 42512 42514 42515 42516 53001 53002 53004 53005 53011 53012 53014 53015 42700 42701 42702 42704 42705 42706 42710 42711 42712 42714 42715 42716

NA 42541 42542 42544 42545 SM NA 42551 42552 42554 42555 SM 53041 53042 53044 53045 53051 53052 53054 53055 NA SM 42742 42744 42745 NA NA SM 42752 42754 42755 SM

42520 42521 42522 42524 42525 42526 SM 42531 42532 42534 42535 SM 53021 53022 53024 53025 53031 53032 53034 53035 42720 42721 42722 42724 42725 42726 42730 42731 42732 42734 42735 42736

NA 42561 42562 42564 42565 42566 NA 42571 42572 42574 42575 SM 53061 53062 53064 53065 53071 53072 53074 53075 NA SM 42762 42764 42765 NA NA SM 42772 42774 42775 SM

USA MADE FLAP DISCS – PREMIUM Z3

Premium Z3 (cont.)

XL Requires high output angle grinders for best results.

CONTAMINATE-FREE Stainless Steel Won’t Rust

Samples Available for Testing – Contact CGW for Details

15


USA MADE FLAP DISCS – Z3 ULTIMATE

Z3 –

SELLING FLAP

Z3 Ultimate

USA Made Flap Discs Description and Applications ■

Z3 Ultimate flap discs have fewer flaps than Z3 XL flap discs which allows the material to further spread out reducing heat generation for easier break down compared to XL discs. Premium Zirconia Alumina grain with a poly/cotton heat treated backing. The poly/cotton combination provides low stretch and strength for the high Zirconia concentration that Z3 contains. Note: Z3 Ultimate discs are stocked only in 4-1/2" diameter. 5" available with a 300 piece minimum order quantity.

Z3 Ultimate XTRA Material

Description and Applications ■

36 and 40 grit Z3 Ultimate flap discs offer 30% more material than regular Z3 flap discs.

ZIRCONIA Side View

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

XTRA Material SIZE

4/ x / 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 5/8-11 1 2

7 8

GRIT

RPM

CARTON QTY

T27 UPC#

T29 UPC#

36 40 36 40

13,300 13,300 13,300 13,300

10 10 10 10

54001 54002 54011 54012

54021 54022 54031 54032

Z3 Ultimate

WIDER & XTRA Material Description and Applications ■

60 and 80 grit Z3 Ultimate Flap Discs • Extra wide material width – 30% more material than regular Z3 flap discs • Unique flap design structure – cushionlike impact for more controlled stock removal and better finishing results • We recommend 80 grit ultimate for best finishing applications.

ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

Side View

WIDER & XTRA Material SIZE

4/ x / 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 5/8-11 5 x 7/8 5 x 7/8 1 2

16

7 8

GRIT

RPM

CARTON QTY

COMPACT T27 UPC#

COMPACT T29 UPC#

60 80 60 80 60 80

13,300 13,300 13,300 13,300 13,300 13,300

10 10 10 10 10 10

54004 54005 54014 54015 SM SM

54024 54025 54034 54035 54064 54065

Samples Available for Testing – Contact CGW for Details


Z3 Compact

USA Made Flap Discs Description and Applications Q

Q

Hybrid compact disc design – Flaps are compressed and compacted at a 4 degree angle for more edge strength during rough grinding and edge work. 20% more material than regular Z3 flap discs.

ZIRCONIA

Side View

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

Z3 Compact Flap Discs SIZE

4/ x / 41/2 x 7/8 41/2 x 7/8 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 1 2

7 8

GRIT

RPM

CARTON QTY

COMPACT UPC#

40 60 80 40 60 80

13,300 13,300 13,300 13,300 13,300 13,300

10 10 10 10 10 10

36310 36311 36312 36313 36314 36315

Z3 Double/XXL

USA MADE FLAP DISCS – Z3 COMPACT & DOUBLE XXL

DISC MATERIAL

USA Made Flap Discs Description and Applications Q Q Q

20% more material than XL flap discs. Designed for easy working on angled surfaces. Extra wide flaps for longer working life.

ZIRCONIA Side View

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

Z3 Double XXL SIZE

GRIT

RPM

CARTON QTY

T27 UPC#

T29 UPC#

41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 5 x 7/8 5 x 7/8 5 x 7/8

40 60 80 40 60 80 40 60 80

13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300

10 10 10 10 10 10 10 10 10

36316 36317 36318 36319 36320 36321 SM SM SM

36322 36323 36324 36325 36326 36327 36348 36349 36350

SM: Size/specification available as special make wheel. 100 piece minimum order.

Samples Available for Testing – Contact CGW for Details

17


USA MADE FLAP DISCS – ALUMINUM BACKED 18

Z3 –

Aluminum Backed T29 USA Made Flap Discs Description and Applications ■

Aluminum backing plate for rigid support and aggressive use. Premium Zirconia Alumina grain with a poly/cotton heat treated backing. The poly/cotton combination provides low stretch and strength for the high Zirconia concentration that Z3 contains. Z3 aluminum backed discs are stocked only in 4-1/2" diameter.

ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

Z3 Aluminum Backed SIZE

GRIT

RPM

CARTON QTY

Thickness REGULAR T29 UPC#

Thickness XL T29 UPC#

41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11

36 40 60 80 36 40 60 80

13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300

10 10 10 10 10 10 10 10

52321 52322 52324 52325 52331 52332 52334 52335

52361 52362 52364 52365 52371 52372 52374 52375

Samples Available for Testing – Contact CGW for Details


Z-THRU – NEW INNOVATION ®

Z-THRU® –

See Thru Zone

Description and Applications ■

■ ■

d ten n te ig PaDes ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

Z-THRU® Flap Discs SIZE

4/ x / 41/2 x 7/8 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 5 x 7/8 5 x 7/8 5 x 7/8 5 x 5/8-11 5 x 5/8-11 5 x 5/8-11 1 2

7 8

GRIT

RPM

CARTON QTY

T27 UPC#

40 60 80 40 60 80 40 60 80 40 60 80

13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200

10 10 10 10 10 10 10 10 10 10 10 10

36328 36329 36330 36331 36332 36333 36334 36335 36336 36337 36338 36339

Z-THRU FLAP DISCS

Patented unique shaped flaps are laser cut and layered to create a see-thru grinding zone – see directly to the workpiece! The wide and open flap design provides fast cutting action and complete control. Premium zirconia alumina grain, quality cooling agent and poly/cotton heattreated backing for long working life. Ideal for blending, finishing and rust removal. For carbon and stainless steels.

See In-Action Video at www.cgwheels.com

Samples Available for Testing – Contact CGW for Details

19


USA MADE FLAP DISCS – ECONOMY

ZIRCONIA ECONOMY

20

Z-Poly Cotton Economy (PCE)

USA Made Flap Discs Description and Applications ■

■ ■

Quality zirconia grain with a poly/cotton heat treated backing. The poly/cotton backing provides low stretch and strength. For steel and stainless steel. Zirconia Poly Cotton Economy (PCE) discs are stocked only in 4-1/2" diameter. Also available in 5" with a 300 piece minimum order. Regular

ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

XL

Z-Poly Cotton – Economy SIZE

GRIT

RPM

CARTON QTY

41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 5/8-11 7 x 5/8-11 7 x 5/8-11 7 x 5/8-11

36 40 60 80 36 40 60 80 36 40 60 80 36 40 60 80

13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Thickness REGULAR T27 UPC# T29 UPC#

Thickness XL T27 UPC# T29 UPC#

41701 41702 41704 41705 41711 41712 41714 41715 41941 41942 41944 41945 41951 41952 41954 41955

41741 41742 41744 41745 41751 41752 41754 41755

41761 41762 41764 41765 41771 41772 41774 41775

41982

42002

41992

42012

41721 41722 41724 41725 41731 41732 41734 41735 41961 41962 41964 41965 41971 41972 41974 41975

Samples Available for Testing – Contact CGW for Details


ZIRCONIA ECONOMY USA Made Flap Discs Description and Applications ■

X weight cotton back Zirconia grain product designed for greater stretch and flexibility. Excellent for contoured work pieces such as metal railings and tubes. Z-Flex discs are stocked only in 4-1/2" diameter. Also available in 5" with a 300 piece minimum order quantity. Z-Flex XL discs have more flaps than Z3 XL discs due to Z-Flex’s flexible cotton backing. Regular

ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

XL

Z-Cotton Flex – Economy SIZE

GRIT

RPM

CARTON QTY

4 x 5/8 4 x 5/8 4 x 5/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11

40 60 80 40 60 80 40 60 80

15,300 15,300 15,300 13,300 13,300 13,300 13,300 13,300 13,300

10 10 10 10 10 10 10 10 10

Thickness REGULAR T27 UPC# T29 UPC#

Thickness XL T27 UPC# T29 UPC#

43345 43346 43347 43320 43321 43322 43323 43324 43325

43332 43333 43334 43335 43336 43337

43326 43327 43328 43329 43330 43331

USA MADE FLAP DISCS – ECONOMY

Z-Flex

43338 43339 43340 43341 43342 43343

5" available; 300 piece minimum per item.

Samples Available for Testing – Contact CGW for Details

21


USA MADE FLAP DISCS – Z-STAINLESS

ON STAINLESS STEEL Premium Z-Stainless USA Made Flap Discs Description and Applications ■

Quickest stainless steel material removal rate on the market – a 56% advantage over competitor’s grains. Plus good carbon based steel material removal for versatile working. Premium blend of Zirconia and Aluminum Oxide grains with a heat treated polyester backing and active grinding aid. Polyester backing is tough and has minimal stretch. Additional layer containing a resin grinding aid and active grinding agents lubricates the grains for break down with light pressure. Designed for heat sensitive applications and all but eliminates heat generation. Pigment added to to grain to maintain blue coloring.

#1 PERFORMER ON STAINLESS #2 PERFORMER ON CARBON ZIRCONIA AO w/GRINDING AID

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

Premium Z-Stainless SIZE

GRIT

RPM

CARTON QTY

41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 5/8-11 7 x 5/8-11 7 x 5/8-11

36 40 60 80 36 40 60 80 40 60 80 40 60 80 40 60 80

13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600 8,600

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

SM: Size/specification available as special make wheel. 100 piece minimum order.

Thickness REGULAR T27 UPC# T29 UPC#

Thickness XL T27 UPC# T29 UPC#

31011 31012 31014 31015 31171 31172 31174 31175 31022 31024 31025 31032 31034 31035 31182 31184 31185

31091 31092 31094 31095 31231 31232 31234 31235 31102 31104 31105 31112 31114 31115 31242 31244 31245

31051 31052 31054 31055 31201 31202 31204 31205 31062 31064 31065 31072 31074 31075 31212 31214 31215

31131 31132 31134 31135 31261 31262 31264 31265 31142 31144 31145 SM SM SM SM SM SM

XL Requires high output angle grinders for best results.

CONTAMINATE-FREE Stainless Steel Won’t Rust

22

Samples Available for Testing – Contact CGW for Details


USA Made Flap Discs Description and Applications ■

■ ■

Premium Blue Fired AO grain with a Polyester heat treated backing. Recommended for universal use and provides rapid stock removal and extremely long life. Active grinding agent provides cool cutting. A3 can be used on ferrous metals (alloyed and unalloyed steels, high speed steel, cast iron), stainless steel, non-ferrous metals (aluminum, brass, copper, zinc) as well as on composites, plastics, and soft and hard woods.

ALUMINUM OXIDE

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

Premium A3 SIZE

GRIT

RPM

CARTON QTY

4 x 5/8 4 x 5/8 4 x 5/8 4 x 3/8-24 4 x 3/8-24 4 x 3/8-24 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 41/2 x 5/8-11 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 5/8-11 7 x 5/8-11 7 x 5/8-11

40 60 80 40 60 80 24 36 40 60 80 120 24 36 40 60 80 120 40 60 80 40 60 80 40 60 80

15,300 15,300 15,300 15,300 15,300 15,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600 8,600

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

SM: Size/specification available as special make wheel. 100 piece minimum order.

Thickness REGULAR T27 UPC# T29 UPC#

Thickness XL T27 UPC# T29 UPC#

39202 39204 39205 39212 39214 39215 39400 39401 39402 39404 39405 39406 39410 39411 39412 39414 39415 39416 SM SM SM 39802 39804 39805 39812 39814 39815

39242 39244 39245 39252 39254 39255 NA SM 39442 39444 39445 39446 NA SM 39452 39454 39455 39456 SM SM SM 39822 39824 39825 39832 39834 39835

SM SM SM SM SM SM 39420 39421 39422 39424 39425 39426 39430 39431 39432 39434 39435 SM 39602 39604 39605 SM SM SM SM SM SM

SM SM SM SM SM SM NA SM 39462 39464 39465 39466 NA SM 39472 39474 39475 SM SM SM SM SM SM SM SM SM SM

USA MADE FLAP DISCS – PREMIUM A3

Premium A3

XL Requires high output angle grinders for best results.

Samples Available for Testing – Contact CGW for Details

23


USA MADE FLAP DISCS – ALUMINUM & SC ULTIMATE

ON ALUMINUM Aluminum

Description and Applications ■

Premium Blue fired AO grain with a polyester heat treated backing. A3 Material with Calcium Stearate coating liquefies under heat keeping the material cooler and preventing loading with soft materials. Use on soft metals and blending stainless steel.

ALUMINUM OXIDE CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

ALUMINUM

Right Angle Grinder

Premium A3 with Calcium Stearate Coating SIZE

GRIT

RPM

CARTON QTY

Thickness REGULAR T27 UPC#

Thickness Regular T29 UPC#

41/2 x 7/8 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 5/8-11 5 x 7/8 5 x 7/8 5 x 5/8-11 5 x 5/8-11 7 x 7/8 7 x 5/8-11

36 60 36 60 36 60 36 60 36 36

13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 8,600 8,600

10 10 10 10 10 10 10 10 10 10

43081 43084 43091 43094 SM SM SM SM 43241 43251

43101 43104 43111 43114 43181 43184 43191 43194 43261 43271

SC Ultimate –

Silicon Carbide Flap Discs Description and Applications ■

Polyester (40-180), cotton (220-600) backed product has sharp aggressive cutting action for a clean, smooth finish. Specialty grinding on granite, marble, stone, plastics, fiberglass, titanium and titanium alloys.

SILICON CARBIDE

SC Ultimate UPC#

56002 56004 56005 56006 56007 56008 56009 56003 24

4 4 4 4 4 4 4 4

SIZE

GRIT

RPM

CARTON QTY

x x x x x x x x

40 60 80 120 240 320 400 600

15,300 15,300 15,300 15,300 15,300 15,300 15,300 15,300

10 10 10 10 10 10 10 10

/ 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5 8

Type 27

SC Ultimate

Right Angle Grinder

SIZE

GRIT

7/8" ARBOR HOLE

5/8-11" ARB0R HOLE

RPM

CARTON QTY

41/2 41/2 41/2 41/2 41/2 41/2 41/2 41/2 7 7

40 60 80 120 240 320 400 600 80 120

56012 56014 56015 56016 56017 56018 56019 56013 56035 56036

56022 56024 56025 56026 56027 56028 56029 56023 56185 56186

13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 8,600 8,600

10 10 10 10 10 10 10 10 10 10

Samples Available for Testing – Contact CGW for Details


Description and Applications ■

Premium Zirconia alumina grain with a poly/cotton heat-treated backing. The poly/cotton combination provides low stretch and strength for long working life. Active grinding agent provides cool cutting with only light pressure. Contaminate-Free. Contains )0.1% iron, sulfur, or chlorine for rust-free and corrosionfree results. Stainless steel won't rust. Z3 mini flap discs are designed to prevent walking, allow access to tight areas and reduce heat build-up. Roll-On and Turn-On attachment styles for quick disc changes.

ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Z3 2"-3" Mini Flap Discs

Die Grinder

A-Roll-On

B-Turn-On

SIZE

TYPE

GRIT

RPM

THICKNESS

CARTON QTY

TYPE R UPC#

TYPE S UPC#

2" 2" 2" 2" 2" 3" 3" 3" 3" 3"

T27 T27 T27 T27 T27 T27 T27 T27 T27 T27

36 40 60 80 120 36 40 60 80 120

24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000

Regular Regular Regular Regular Regular Regular Regular Regular Regular Regular

10 10 10 10 10 10 10 10 10 10

30001 30002 30004 30005 30006 30011 30012 30014 30015 30016

N/A 30022 30024 30025 30026 N/A 30032 30034 30035 30036

FLAP DISCS - 2"-3" MINI PREMIUM Z3

Z3 2"-3" Mini Flap Discs

Rubber Holder Pads Roll On/Turn On Description and Applications ■ ■

Medium grade reinforced rubber pad holder. Full offering shown on page 38. Die Grinder

Roll-On Rubber Holder Pads UPC#

SIZE/SPEC

CARTON QTY

59732 59734

For 2" discs #30001-30006 For 3" discs #30011-30016

1 1

Turn-On Rubber Holder Pads UPC#

SIZE/SPEC

CARTON QTY

59738 59735

For 2" discs #30022-30026 For 3" discs #30032-30036

1 1

Samples Available for Testing – Contact CGW for Details

25


SURFACE CONDITIONING FLAP DISCS 26

Surface Conditioning Flap Discs

Description and Applications ■

Premium surface conditioning material for surface preparation. Three different grits for blending, deburring, and cleaning. For steel and stainless steel.

Type 29 Right Angle Grinder

UPC#

SIZE

GRIT

RPM

CARTON QTY

70120 70121 70122 70123 70124 70125

41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 7/8 1 4 /2 x 5/8-11

Coarse – Brown Coarse – Brown Medium – Maroon Medium – Maroon Very Fine – Blue Very Fine – Blue

13,300 13,300 13,300 13,300 13,300 13,300

10 10 10 10 10 10

Samples Available for Testing – Contact CGW for Details


SEMI-FLEX DISCS Semi-Flex Discs Description and Applications ■

41/2 x

/

13,300 R.P.M.

7 8

Silicon Carbide

SILICON CARBIDE ALUMINUM OXIDE 7 x

Aluminum Oxide Type 27

Right Angle Grinder

/

SEMI-FLEX DISCS

For aggressive grinding T27 Silicon Carbide (C) for non-ferrous materials such as... • Removing Epoxy, Glue or Urethane, Coatings, Mastiks • Fiberglass (ex: boat hulls) • Quartz / Terrazzo / Concrete • Marble • Enamels / Porcelain / China clay • Cow hooves Aluminum Oxide (A) for metal working and grinding down rough castings. 7" 36 grit has a T29 shape. Excellent on materials such as... • Cold rolled • Stainless steel • Bronze • Aluminum • Iron

8,600 R.P.M.

7 8

UPC#

GRIT-HARDNESS

SPEC.

CARTON QTY

UPC#

GRIT-HARDNESS

SPEC.

CARTON QTY

35830 35831 35832 35833 35834 35835 35836 35837 35838

16-B 24-B 36-B 16-B 24-B 36-B 60-B 80-B 120-B

A-16-B A-24-B A-36-B C-16-B C-24-B C-36-B C-60-B C-80-B C-120-B

25 25 25 25 25 25 25 25 25

35839 35840 35841 35842 35843 35844 35845 35846 35847

16-B 24-B 36-B 16-B 24-B 36-B 60-B 80-B 120-B

A-16-B A-24-B A-36-B C-16-B C-24-B C-36-B C-60-B C-80-B C-120-B

25 25 25 25 25 25 25 25 25

Economy Semi-Flex Discs Description and Applications ■

For aggressive grinding T29 Silicon Carbide (C) for non-ferrous materials such as... • Fiberglass (ex: boat hulls) • Removing Epoxy, Glue or Urethane, Coatings, Mastiks • Quartz / Terrazzo / Concrete • Marble • Enamels / Porcelain / China clay • Cow hooves

41/2 x

/

13,300 R.P.M.

7 8

UPC#

GRIT-HARDNESS

SPEC.

CARTON QTY*

36292 36293 36294

16-B 24-B 36-B

C-16-B C-24-B C-36-B

25 25 25

UPC#

GRIT-HARDNESS

SPEC.

CARTON QTY*

36235 36236 36237

16-B 24-B 36-B

C-16-B C-24-B C-36-B

25 25 25

7 x

/

Type 29

SILICON CARBIDE Right Angle Grinder

8,600 R.P.M.

7 8

Rubber Back-up Pads Required (see page 33 for full program)

*Carton contains two shrink-wrapped packages of five discs.

Samples Available for Testing – Contact CGW for Details

27


RESIN FIBRE DISCS – ALUMINUM OXIDE

RESIN FIBRE DISCS

28

Resin Fibre Discs Aluminum Oxide

Description and Applications ■

A premium quality AO disc designed for long life, high stock removal and cool cutting action on metal and welds. Sharp, heat-treated and blue fired AO grain electrostatically coated to a heavy duty vulcanized fibre backing with heat resistant phenolic resins. Fast, cool cutting performance. 7" Quick lock discs are only available with the flat resin fibre disc. 7" discs are available with a depressed center which increases the amount of disc that can be used and helps prevent premature curling during storage.

ALUMINUM OXIDE Right Angle Grinder

Rubber Back-up Pads Required (see page 33 for full program)

Aluminum Oxide Resin Fibre Discs SIZE

SPEC.

RPM

CARTON QTY

STANDARD PROGRAM UPC#

4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8

16 Grit 24 Grit 36 Grit 50 Grit 60 Grit 80 Grit 100 Grit 120 Grit 16 Grit 24 Grit 30 Grit 36 Grit 50 Grit 60 Grit 80 Grit 100 Grit 120 Grit 16 Grit 24 Grit 30 Grit 36 Grit 50 Grit 60 Grit 80 Grit 100 Grit 120 Grit

15,300 15,300 15,300 15,300 15,300 15,300 15,300 15,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

48000 48001 48002 48004 48005 48006 48007 48008 48010 48011 48013 48012 48014 48015 48016 48017 48018 48020 48021 48023 48022 48024 48025 48026 48027 48028

QUICK LOCK UPC#

48711 48712 48714 48715 48716

48721 48722 48724 48725 48726

Samples Available for Testing – Contact CGW for Details


ALUMINUM OXIDE

7 7 7 7 7 7 7 7 7 7 7 9 9 9 9 9 9 9 9 9

SIZE

SPEC.

RPM

CARTON QTY

STANDARD PROGRAM UPC#

x x x x x x x x x x x x x x x x x x x x

16 Grit 24 Grit 30 Grit 36 Grit 50 Grit 60 Grit 80 Grit 100 Grit 120 Grit 150 Grit 180 Grit 16 Grit 24 Grit 36 Grit 50 Grit 60 Grit 80 Grit 100 Grit 120 Grit 150 Grit

8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 6,600 6,600 6,600 6,600 6,600 6,600 6,600 6,600 6,600

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

48030 48031 49233 48032 48034 48035 48036 48037 48038 48033 48039 48040 48041 48042 48044 48045 48046 48047 48048 48049

/ / 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7 8 7 8

FLAT UPC#

QUICK LOCK UPC#

48621

48731

48622 48624 48625 48626

48732 48734 48735 48736

48741 48742 48744 48745 48746

RESIN FIBRE DISCS – ALUMINUM OXIDE

Aluminum Oxide Resin Fibre Discs (cont.)

Aluminum Oxide

50 or 100-Pack Spindles Description and Applications ■

Spindle-spool design with tightening nut provides convenient storage and keeps discs flat. SIZE

SPEC.

4/ x / 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 1 2

7 8

24 36 50 60 80 24 36 50 60 80 24 36 50 60 80

Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit

RPM

CARTON QTY

UPC#

13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600

50 100 100 100 100 50 100 100 100 100 50 100 100 100 100

48501 48502 48503 48504 48505 48508 48509 48510 48511 48512 48515 48516 48517 48518 48519

Premium spindle 41/2 & 5" spindle only (for replacement) 7" spindle only (for replacement)

36203 48251 48252

Spindle only available

Premium Spindle

Samples Available for Testing – Contact CGW for Details

29


RESIN FIBRE DISCS RESIN FIBRE DISCS – ZIRCONIA

Resin Fibre Discs

30

Zirconia - High Performance Description and Applications ■

High concentration of Zirconia and heattreated Aluminum Oxide grain provides twice the cutting action of premium AO discs and is extremely heat resistant. The special fracturing characteristics of the Zirconia grain provide a consistent action throughout the disc’s life. High performance on blending welds, stainless steel, inconel, titanium and tool steel. 7" discs are available with a depressed center which increases the amount of disc that can be used and helps prevent premature curling during storage.

ZIRCONIA Right Angle Grinder

Rubber Back-up Pads Required (see page 33 for full program)

Zirconia Resin Fibre Discs SIZE

4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8

SPEC.

16 24 36 50 60 80 16 24 30 36 50 60 80 16 24 30 36 50 60 80 16 24 30 36 50 60 80 24 36 50 60 80

Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit

RPM

CARTON QTY

STANDARD PROGRAM UPC#

15,300 15,300 15,300 15,300 15,300 15,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600 8,600 8,600 6,600 6,600 6,600 6,600 6,600

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

48230 48231 48232 48234 48235 48236 48100 48101 48103 48102 48104 48105 48106 48110 48111 48113 48112 48114 48115 48116 48120 48121 48123 48122 48124 48125 48126 48141 48142 48144 48145 48146

7" FLAT UPC#

QUICK LOCK UPC#

48801 48802 48804 48805 48806 48811 48812 48814 48815 48816 48921

48821

48922 48924 48925 48926

48822 48824 48825 48826 48831 48832 48834 48835 48836

Samples Available for Testing – Contact CGW for Details


ZIRCONIA Zirconia

50 or 100-Pack Spindles Description and Applications ■

Spindle-spool design with tightening nut provides convenient storage and keeps discs flat. 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8

SPEC.

24 36 50 60 80 24 36 50 60 80 24 36 50 60 80

Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit

RPM

CARTON QTY

STANDARD PROGRAM UPC#

13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600

50 100 100 100 100 50 100 100 100 100 50 100 100 100 100

48528 48529 48530 48531 48532 48533 48534 48535 48536 48537 48538 48539 48540 48541 48542

Premium spindle 4 / & 5" spindle only (for replacement) 7" spindle only (for replacement) 1 2

Spindle only available

36203 48251 48252

Premium Spindle

Resin Fibre Discs

Ceramic Blend with Grinding Aid Description and Applications ■

Ceramic grain is extremely hard and self-sharpens during operation. Ceramic grain breaks down with less pressure than Zirconia discs without heat damage. Grinding aid keeps the disc cool while grinding hard materials and aluminum. SIZE

41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 41/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8

SPEC.

24 36 50 60 80 24 36 50 60 80 24 36 50 60 80

Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit

RESIN FIBRE DISCS

SIZE

d

ove r p m

I

CERAMIC Right Angle Grinder

RPM

CARTON QTY

UPC#

QUICK LOCK UPC#

13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

48181 48182 48184 48185 48186 48191 48192 48194 48195 48196 48201 48202 48204 48205 48206

48881 48882 48884 48885 48886 48891 48892 48894 48895 48896 48901 48902 48904 48905 48906

Samples Available for Testing – Contact CGW for Details

31


Resin Fibre Discs Silicon Carbide

Description and Applications

RESIN FIBRE DISCS

Aggressive cutting action for a clean, smooth finish. Excellent on titanium, fiberglass, plastics, and masonry products.

SILICON CARBIDE Right Angle Grinder

Silicon Carbide Resin Fibre Discs 5 5 5 7 7 7 7 7 7 7 7 7 7 7

SIZE

SPEC.

RPM

CARTON QTY

UPC#

x x x x x x x x x x x x x x

16 Grit 24 Grit 36 Grit 16 Grit 24 Grit 36 Grit 50 Grit 60 Grit 80 Grit 120 Grit 150 Grit 220 Grit 300 Grit 400 Grit

12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600

25 25 25 25 25 25 25 25 25 25 25 25 25 25

48320 48321 48322 48330 48331 48332 48334 48335 48336 48338 48333 48350 48339 48352

/ 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7 8

Resin Fibre Discs Open-Coated AO

Description and Applications ■

Island pattern aluminum oxide grain does not load when grinding/finishing aluminum or other soft, malleable non-ferrous materials.

ALUMINUM OXIDE Right Angle Grinder

Open-Coated AO Resin Fibre Discs SIZE

SPEC.

4/ x / 41/2 x 7/8 41/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 1 2

32

7 8

24 36 50 24 36 50 24 36 50 24 36 50

Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit

RPM

CARTON QTY

UPC#

15,300 15,300 15,300 12,200 12,200 12,200 8,600 8,600 8,600 6,600 6,600 6,600

25 25 25 25 25 25 25 25 25 25 25 25

48401 48402 48404 48411 48412 48414 48421 48422 48424 48431 48432 48434

Samples Available for Testing – Contact CGW for Details


Rubber Back-up Pads Description and Applications ■

Rubber w/Standard Spiral Pattern - w/o Nut UPC#

SIZE/SPEC

Rubber w/Smooth Bore & Spiral Pattern - w/o Nut CARTON QTY

Medium

49514* 48220 48221 48222 48239

4" x 5/8-11 41/2" x 5/8-11 5" x 5/8-11 7" x 5/8-11 9" x 5/8-11

1 1 1 1 1

7" x 5/8-11 9" x 5/8-11

1 1

7" x 5/8-11 9" x 5/8-11

1 1

49515* 49521 49519

SIZE/SPEC

CARTON QTY

4" 41/2" 5"

1 1 1

* Use with #49529 nut.

Rubber w/Smooth Face w/o Nut UPC#

Rigid

49511 49527

UPC#

Medium

Flexible

49510 49526

Rubber Back-up Pad

* Use with #49529 nut.

BACK-UP PADS

Rubber Back-up Pads - Use with coarse grits • Spiral ribs provide contact points and form channels for air flow, extending disc life 30% to 50%. • Improved mechanical and chemical bond between rubber and metal provides increased airflow and higher RPM ratings. • Larger air holes provide cooler operating area and longer abrasive disc life. • Pad size meets ANSI B186.1 standards. • Flexible Rubber Pads are recommended for contours and Rigid Pads will last longer on aggressive grinding applications.

SIZE/SPEC

CARTON QTY

4" x 5/8-11 41/2" x 5/8-11 5" x 5/8-11 7" x 5/8-11

1 1 1 1

7" x 5/8-11

1

7" x 5/8-11

1

Medium

49501 49508 49503 49506 Flexible

49504 Rigid

49505

Polypropylene Back-up Pads Description and Applications

Polypropylene Back-up Pads - Use with medium to fine grits • Spiral ribs provide contact points and form channels for airflow. • Smooth face pads are excellent for general purpose applications. • Made in the USA. Polypropylene w/Standard Spiral Pattern - w/o Nut ■

UPC#

SIZE/SPEC

CARTON QTY

41/2" 5" 7"

1 1 1

Medium

36204 36205 36206

Polypropylene w/Smooth Face & Smooth Bore - w/o Nut UPC#

SIZE/SPEC

CARTON QTY

48218 48224 48225 48226 48240

4" 41/2" 5" 7" 9"

1 1 1 1 1

Polypropylene Back-up Pad

Accessories UPC#

48223 49530 49529 49531 48229

SIZE/SPEC

/ -11 Locking Pad Nut 11/2" Flange w/Holes 5/8-11 Locking Pad Nut 2" Flange w/Holes 3/8-24 Locking Pad Nut 11/2" Flange w/Holes 10mm 1.25 Pad Nut 11/2" Flange w/Holes Adjustable Spanner Wrench 5 8

Samples Available for Testing – Contact CGW for Details

CARTON QTY

1 1 1 1 1 33


QUICK CHANGE LAMINATED DISCS – ROLL ON

QUICK CHANGE DISCS ROLL-ON 11/2-3" Quick Change Discs C3 Ceramic, Roll On

■ ■ ■

Self-sharpening ceramic grain and cool grinding aid for fast, aggressive cutting action on hard-to-grind materials. Polyester backing material for long working life. Use on steel, stainless and heat sensitive materials. Uses USA developed, automated spin-weld attachment process for fast and secure fastening.

11/2" Diameter

SPEC.

CARTON QTY

59900 59901 59902 59903 59904 59905 59906 59907

24G 36G 40G 50G 60G 80G 100G 120G

100 100 100 100 100 100 100 100

UPC#

Die Grinder

25,000 R.P.M.

UPC#

2" Diameter

25,000 R.P.M. SPEC.

CARTON QTY

Rubber Holder Pads Required (see page 38 for full program)

3" Diameter

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

50 50 50 50 50 50 50 50

59920 59921 59922 59923 59924 59925 59926 59927

24G 36G 40G 50G 60G 80G 100G 120G

25 25 25 25 25 25 25 25

2-3" Quick Change Discs Zirconia AO w/Grinding Aid, Roll On

ZIRCONIA AO w/GRINDING AID

59910 59911 59912 59913 59914 59915 59916 59917

■ ■ ■ Q

24G 36G 40G 50G 60G 80G 100G 120G

Die Grinder

Zirconia aluminum oxide for faster cutting and long working life. Strong 2-ply design for flat or contoured work. Grinding aid for cooler cutting. Uses USA Developed, Automated Spin-Weld Attachment Process for Fast and Secure Fastening.

2" Diameter

34

CERAMIC

25,000 R.P.M.

3" Diameter

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

59587 59588 59589 59590 59591 59592 59593

24G 36G 40G 50G 60G 80G 120G

50 50 50 50 50 50 50

59594 59595 59596 59597 59598 59599 59600

24G 36G 40G 50G 60G 80G 120G

25 25 25 25 25 25 25

Samples Available for Testing – Contact CGW for Details


QUICK CHANGE DISCS ROLL-ON ■ ■ Q

ZIRCONIA AO

Die Grinder Zirconia aluminum oxide for faster cutting and long working life. Strong 2-ply design for flat or contoured work. Easy roll-on attachment. Uses USA Developed, Automated Spin-Weld Attachment Process for Fast and Secure Fastening.

11/2" Diameter UPC#

59717 59560 59561 59562 59563 59564 2" Diameter

25,000 R.P.M. SPEC.

24G 36G 40G 50G 60G 80G

CARTON QTY

100 100 100 100 100 100 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59718 59565 59566 59567 59568 59569

24G 36G 40G 50G 60G 80G

50 50 50 50 50 50

3" Diameter UPC#

59719 59570 59571 59572 59573 59574 4" Diameter

20,000 R.P.M. SPEC.

24G 36G 40G 50G 60G 80G

CARTON QTY

25 25 25 25 25 25 12,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59720 59575 59576 59577 59578 59579

24G 36G 40G 50G 60G 80G

25 25 25 25 25 25

QUICK CHANGE LAMINATED DISCS – ROLL ON

11/2-4" Quick Change Discs Zirconia AO, Roll On

11/2-4" Quick Change Discs ALUMINUM OXIDE Aluminum Oxide, Roll On ■ ■ Q

Die Grinder Aluminum oxide for long working life. Strong 2-ply design for flat or contoured work. Easy roll-on attachment. Uses USA Developed, Automated Spin-Weld Attachment Process for Fast and Secure Fastening.

11/2" Diameter UPC#

59512 59513 59514 59515 59516 59517 59518 59519 2" Diameter

25,000 R.P.M. SPEC.

24G 36G 40G 50G 60G 80G 100G 120G

CARTON QTY

100 100 100 100 100 100 100 100 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59524 59525 59526 59527 59528 59529 59530 59531

24G 36G 40G 50G 60G 80G 100G 120G

50 50 50 50 50 50 50 50

3" Diameter UPC#

59536 59537 59538 59539 59540 59541 59542 59543 4" Diameter

20,000 R.P.M. SPEC.

24G 36G 40G 50G 60G 80G 100G 120G

CARTON QTY

25 25 25 25 25 25 25 25 12,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59548 59549 59550 59551 59552 59553 59554 59555

24G 36G 40G 50G 60G 80G 100G 120G

25 25 25 25 25 25 25 25

Samples Available for Testing – Contact CGW for Details

35


QUICK CHANGE LAMINATED DISCS – TURN ON

QUICK CHANGE DISCS TURN-ON 11/2-3" Quick Change Discs C3 Ceramic, Turn On

■ ■

Self-sharpening ceramic grain and cool grinding aid for fast, aggressive cutting action on hard-to-grind materials. Polyester backing material for long working life. Use on steel, stainless and heat sensitive materials. Uses USA developed, automated spin-weld attachment process for fast and secure fastening.

11/2" Diameter

■ ■ ■ Q

SPEC.

CARTON QTY

59940 59941 59942 59943 59944 59945 59946 59947

24G 36G 40G 50G 60G 80G 100G 120G

100 100 100 100 100 100 100 100 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59950 59951 59952 59953 59954 59955 59956 59957

24G 36G 40G 50G 60G 80G 100G 120G

Rubber Holder Pads Required (see page 38 for full program)

3" Diameter

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

50 50 50 50 50 50 50 50

59960 59961 59962 59963 59964 59965 59966 59967

24G 36G 40G 50G 60G 80G 100G 120G

25 25 25 25 25 25 25 25

2-3" Quick Change Discs Zirconia AO w/Grinding Aid, Turn On

ZIRCONIA AO w/GRINDING AID Die Grinder

Zirconia aluminum oxide for faster cutting and long working life. Strong 2-ply design for flat or contoured work. Grinding aid for cooler cutting. Uses USA Developed, Automated Spin-Weld Attachment Process for Fast and Secure Fastening.

2" Diameter

36

Die Grinder

25,000 R.P.M.

UPC#

2" Diameter

CERAMIC

25,000 R.P.M.

3" Diameter

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

59696 59697 59698 59699 59700 59701 59702

24G 36G 40G 50G 60G 80G 120G

50 50 50 50 50 50 50

59703 59704 59705 59706 59707 59708 59709

24G 36G 40G 50G 60G 80G 120G

25 25 25 25 25 25 25

Samples Available for Testing – Contact CGW for Details


QUICK CHANGE DISCS TURN-ON ■

ZIRCONIA

Zirconia aluminum oxide for faster cutting and long working life. Strong 2-ply design for flat or contoured work.

11/2" Diameter UPC#

59668 59669 59670 59671 59672 59673 2" Diameter

Die Grinder

25,000 R.P.M. SPEC.

24G 36G 40G 50G 60G 80G

CARTON QTY

50 50 50 50 50 50 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59722 59674 59675 59676 59677 59678

24G 36G 40G 50G 60G 80G

50 50 50 50 50 50

3" Diameter

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59723 59679 59680 59681 59682 59683

24G 36G 40G 50G 60G 120G

25 25 25 25 25 25

QUICK CHANGE LAMINATED DISCS – TURN ON

11/2-4" Quick Change Discs Zirconia AO, Turn On

11/2-4" Quick Change Discs Aluminum Oxide, Turn On ■ ■

Aluminum oxide for long working life. Strong 2-ply design for flat or contoured work.

11/2" Diameter UPC#

59621 59622 59623 59624 59625 59626 59627 59628 2" Diameter

ALUMINUM OXIDE

25,000 R.P.M. SPEC.

24G 36G 40G 50G 60G 80G 100G 120G

CARTON QTY

50 50 50 50 50 50 50 50 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59633 59634 59635 59636 59637 59638 59639 59640

24G 36G 40G 50G 60G 80G 100G 120G

50 50 50 50 50 50 50 50

Die Grinder

3" Diameter UPC#

59645 59646 59647 59648 59649 59650 59651 59652 4" Diameter

20,000 R.P.M. SPEC.

24G 36G 40G 50G 60G 80G 100G 120G

CARTON QTY

25 25 25 25 25 25 25 25 12,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59657 59658 59659 59660 59661 59662 59663 59664

24G 36G 40G 50G 60G 80G 100G 120G

25 25 25 25 25 25 25 25

Samples Available for Testing – Contact CGW for Details

37


QUICK CHANGE DISCS – SURFACE CONDITIONING

QUICK CHANGE DISCS SURFACE CONDITIONING 2-4" Quick Change Discs – Surface Conditioning, Roll On ■

Q

For stainless steel, and ferrous & non-ferrous metals. Uses USA Developed, Automated Spin-Weld Attachment Process for Fast and Secure Fastening.

2" Diameter

25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59503 59504 59505 59608

Coarse – Brown Medium – Maroon A Very Fine – Blue S Ultra Fine – Grey

50 50 50 50

3" Diameter

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59506 59507 59508 59609

Coarse – Brown Medium – Maroon A Very Fine – Blue S Ultra Fine – Grey

25 25 25 25

Die Grinder

4" Diameter

12,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59509 59510 59511

Coarse – Brown Medium – Maroon A Very Fine – Blue

25 25 25

2-3" Quick Change Discs – Surface Conditioning, Turn On ■

For stainless steel, and ferrous & non-ferrous metals.

Die Grinder

2" Diameter

25,000 R.P.M.

3" Diameter

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

59610 59611 59612

Coarse – Brown Medium – Maroon Very Fine – Blue

50 50 50

59614 59615 59616

Coarse – Brown Medium – Maroon Very Fine – Blue

25 25 25

Rubber Holder Pads – 11/2-4" Roll On / Turn On ■ ■ ■

Medium grade reinforced rubber pad holder. 59738 is our standard 2" turn on pad. One piece in plastic bag with label.

Die Grinder

Roll On – External Thread

38

Turn On – Internal Thread

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

59728 59730 59732 59734 59736

1" Dia. x 1/4" / Roll On 11/2" Dia. x 1/4" / Roll On 2" Dia. x 1/4" / Roll On 3" Dia. x 1/4" / Roll On 4" Dia. x 1/4" / Roll On

1 1 1 1 1

59729 59731 59733 59738 59735

1" Dia. x 1/4" / Turn On 11/2" Dia. x 1/4" / Turn On 2" Dia. x 1/4" / M6 2" Dia. x 1/4" / M10 3" Dia. x 1/4" / Turn On

1 1 1 1 1

Samples Available for Testing – Contact CGW for Details


FLAP WHEELS Flexible material with premium cut rate Description and Applications ■

■ ■

Premium quality AO flap wheel made with a flexible x-wt. cotton backing for faster cut rate vs. traditional AO flap wheels. Flexible, yet strong flaps for easy working on hard-to-reach places. Fast and cool cutting action. Use on ferrous and non-ferrous metals.

ALUMINUM OXIDE Die Grinder

/ x 5/8 x 1/4

30,000 R.P.M.

5 8

UPC#

SPEC.

70211 70212

60 80

/ x 3/4 x 1/4

UPC#

SPEC.

CARTON QTY

10 10

71088 71089 71090 71091

40 60 80 120

10 10 10 10

UPC#

SPEC.

CARTON QTY

71000 71001 71002

60 80 120

10 10 10

1 x 1 x 1/4

30,000 R.P.M.

UPC#

SPEC.

CARTON QTY

71033 71034 71035 71036

40 60 80 120

10 10 10 10

11/2 x 1 x 1/4

25,000 R.P.M.

CARTON QTY

30,000 R.P.M.

3 4

2 x 1 x 1/4

25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

71040 71041 71042 71043

40 60 80 120

10 10 10 10

21/2 x 1 x 1/4

AO-FLEX FLAP WHEELS - 1/4" SHANK

AO-Flex Flap Wheels: 1/4" Shank

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

71114 71115 71116

60 80 120

10 10 10

3 x 1 x 1/4

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

71147 71148 71149 71150

40 60 80 120

10 10 10 10

Samples Available for Testing – Contact CGW for Details

39


AO-FIRM FLAP WHEELS – 1/4" SHANK

FLAP WHEELS AO-Firm Flap Wheels: 1/4" Shank Description and Applications ■

■ ■

Firm, quality aluminum oxide coated abrasive material. The flaps, arranged like a fan around the shaft of the tool, provide for consistent cutting action, maximum performance and long life. Use on all ferrous and non-ferrous materials, stainless steel, iron, brass, aluminum, plastic, fiberglass, wood and glass. Excellent for working in small, difficult to reach places. CGW flap wheels have more flaps compared to leading flap wheel manufacturers.

/ x 3/4 x 1/4 UPC#

SPEC.

CARTON QTY

37098 37099 37100 37103 37104 37105 1 x 5/8 x 1/4

60 80 120 180 240 320

10 10 10 10 10 10 30,000 R.P.M.

UPC#

SPEC.

CARTON QTY

39903 39904 39905 1 x 1 x 1/4

60 80 120

10 10 10 30,000 R.P.M.

SPEC.

CARTON QTY

39907 39908 39909 39910 39912 39913 39914 11/2 x 1/2 x 1/4

40 60 80 120 180 240 320

10 10 10 10 10 10 10 25,000 R.P.M.

SPEC.

CARTON QTY

39915 39916 39917 41032 41035 41510 1 1 /2 x 1 x 1/4

60 80 120 180 240 320

10 10 10 10 10 10 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

39920 39921 39922 39923 41036 41037 41630

40 60 80 120 180 240 320

10 10 10 10 10 10 10

UPC#

UPC#

40

30,000 R.P.M.

3 4

2 x 1/2 x 1/4

ALUMINUM OXIDE

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Die Grinder

25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

39924 39925 39926 39927 41038 41039 41631 2 x 3/4 x 1/4

40 60 80 120 180 240 320

10 10 10 10 10 10 10 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

39928 39929 39930 40002

60 80 120 150

10 10 10 10 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

39931 39932 39933 39934 39935 39936 39937

40 60 80 120 180 240 320

10 10 10 10 10 10 10 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

40003 40004 40005 40006

40 60 80 120

10 10 10 10 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

39938 39939

60 80

10 10

2 x 1 x 1/4

2 x 11/2 x 1/4

2 x 2 x 1/4

21/2 x 1/2 x 1/4

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

41015 41016 41017

60 80 120

10 10 10

Samples Available for Testing – Contact CGW for Details


FLAP WHEELS AO-Firm Flap Wheels: 1/4" Shank 21/2 x 1 x 1/4 SPEC.

39941 39942 39943 41500 41501 41511

CARTON QTY

60 80 120 180 240 320

21/2 x 11/2 x 1/4

10 10 10 10 10 10 20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

41121 41122 41123

60 80 120

10 10 10

3 x 1/2 x 1/4

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

41018 41019 41020 41502 41503 41504

60 80 120 180 240 320

10 10 10 10 10 10

3 x 1 x 1/4

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

40 60 80 120 180 240 320

10 10 10 10 10 10 10 20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

41513 41514 41515 41516 41517 41518

60 80 120 180 240 320

10 10 10 10 10 10 20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

41044 39954 39955 39956

40 60 80 120

10 10 10 10

39947 39948 39949 39950 39951 39952 39953 3 x 11/2 x 1/4

3 x 2 x 1/4

FLAP WHEELS – 1/4" SHANK

UPC#

20,000 R.P.M.

Zirconia Flap Wheels: 1/4" Shank Description and Applications ■

■ ■ ■

Zirconia grain provides sharper cutting and longer life than aluminum oxide flap wheels. Excellent for smoothing and deburring. Durable cotton backing For work on steel, stainless steel, non-ferrous metals and alloys.

1 x 1 x 1/4

30,000 R.P.M.

ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Die Grinder

2 x 1 x 1/4

25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

41519 41520 41521

40 60 80

10 10 10

41525 41526 41527

40 60 80

10 10 10

11/2 x 1 x 1/4

25,000 R.P.M.

3 x 1 x 1/4

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

41522 41523 41524

40 60 80

10 10 10

41528 41529 41530

40 60 80

10 10 10

Samples Available for Testing – Contact CGW for Details

41


FLAP WHEELS – 1/4"-20 SHANK

FLAP WHEELS AO-Firm Flap Wheels: 1/4"-20 Shank

48250

Description and Applications ■

ALUMINUM OXIDE

CGW flap wheels have more flaps compared to leading flap wheel manufacturers

1 x 5/8 x 1/4-20 UPC#

39960 39961 39962 1 x 1 x 1/4-20

30,000 R.P.M. SPEC.

60 80 120

UPC#

SPEC.

39964 39965 39966 39967 39968

40 60 80 120 180

11/2 x 1 x 1/4-20 UPC#

39977 39978 39979 39980 2 x 1/2 x 1/4-20

SPEC.

40 60 80 120

CARTON QTY

10 10 10 30,000 R.P.M. CARTON QTY

10 10 10 10 10 25,000 R.P.M. CARTON QTY

10 10 10 10 25,000 R.P.M.

UPC#

SPEC.

CARTON QTY

40007 40008 40009

60 80 120

10 10 10

Die Grinder

2 x 1 x 1/4-20

25,000 R.P.M.

UPC#

SPEC.

39988 39989 39990 39991 39992 21/2 x 1 x 1/4-20

40 60 80 120 180

CARTON QTY

10 10 10 10 10 20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

39998 39999 41000

60 80 120

10 10 10

3 x 1/2 x 1/4-20

20,000 R.P.M.

UPC#

SPEC.

41608

60

3 x 1 x / -20 1 4

CARTON QTY

10 20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

41004 41005 41006 41007 41008

40 60 80 120 180

10 10 10 10 10

UPC#

SPEC.

CARTON QTY

48250

1/4-20 Adaptor

10

/ -20 Adaptor

1 4

Interleaf Wheels Description and Applications ■

Alternating flaps of non-woven and coated abrasive materials for fast, uniform surface preparation and finishes. Medium grade wheels easily clean, blend, and debur aluminum & stainless steels, and ferrous & non-ferrous metals. Very fine grade wheels for satin finishing on aluminum & stainless steels, and ferrous and non-ferrous metals. Spindle mount for quick and easy changes.

2 x 1 x 1/4

42

Die Grinder

3 x 1 x 1/4

11,000 R.P.M.

UPC#

SPEC.

CARTON QTY

36207 36208 36209 36210

Medium 60 Grit Medium 80 Grit Very Fine 120 Grit Very Fine 180 Grit

10 10 10 10

8,000 R.P.M.

UPC#

SPEC.

36211 36212 36213 36214 3 x 2 x 1/4

Medium 60 Grit Medium 80 Grit Very Fine 120 Grit Very Fine 180 Grit

CARTON QTY

UPC#

SPEC.

CARTON QTY

36250 36215 36216 36217 36218

EXTRA Coarse 60 Grit Medium 60 Grit Medium 80 Grit Very Fine 120 Grit Very Fine 180 Grit

10 10 10 10 10

10 10 10 10 8,000 R.P.M.

Samples Available for Testing – Contact CGW for Details


Mini Flap Wheels

■ ■

Quality aluminum oxide grain with X-flex weight backing Use on stainless steel, steel, alloyed steel, nonferrous materials, aluminum, titanium, and glass

ALUMINUM OXIDE Die Grinder

/ x / x /

3 8

3 8

38,000 R.P.M.

1 8

/ x / x /

3 4

3 8

38,000 R.P.M.

1 8

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

70057 70058 70059 70060 70061

60 80 120 180 240

10 10 10 10 10

70074 70075 70076 70077 70078 70079

60 80 120 180 240 320

10 10 10 10 10 10

/ x 5/8 x 1/8

38,000 R.P.M.

5 8

UPC#

SPEC.

CARTON QTY

70062 70063 70064 70065 70066 70067

60 80 120 180 240 320

10 10 10 10 10 10

/ x 3/16 x 1/8

38,000 R.P.M.

3 4

UPC#

SPEC.

CARTON QTY

70068 70069 70070 70071 70072 70073

60 80 120 180 240 320

10 10 10 10 10 10

/ x 3/4 x 1/8

38,000 R.P.M.

3 4

UPC#

SPEC.

CARTON QTY

60 80 120 180 240 320

10 10 10 10 10 10 38,000 R.P.M.

SPEC.

CARTON QTY

60 80 120 180

10 10 10 10 38,000 R.P.M.

UPC#

SPEC.

CARTON QTY

70090 70091 70092 70093

60 80 120 180

10 10 10 10

70080 70081 70082 70083 70084 70085 3 1 /16 x 3/16 x 1/8 UPC#

70086 70087 70088 70089 3 1 /16 x 3/8 x 1/8

MINI FLAP WHEELS – NON WOVEN FLAP WHEELS

FLAP WHEELS

Non Woven Flap Wheels Description and Applications

100% non woven aluminum oxide flap wheels provide excellent flexibility and conforms to work surface.

1 x 1 x 1/4

12,000 R.P.M.

UPC#

SPEC.

CARTON QTY

36450 36451 36452

Coarse (Tan) Medium (Maroon) Fine (Maroon)

10 10 10

2 x 1 x 1/4

12,000 R.P.M.

UPC#

SPEC.

CARTON QTY

36453 36454 36455

Coarse (Tan) Medium (Maroon) Fine (Maroon)

10 10 10

3 x 1 x 1/4

10,000 R.P.M.

UPC#

SPEC.

CARTON QTY

36456 36457 36458

Coarse (Tan) Medium (Maroon) Fine (Maroon)

10 10 10

3 x 2 x 1/4

10,000 R.P.M.

UPC#

SPEC.

CARTON QTY

36459 36460 36461

Coarse (Tan) Medium (Maroon) Fine (Maroon)

10 10 10

Samples Available for Testing – Contact CGW for Details

43


FLAP WHEEL DRUMS Flap Wheel Drums with Keyhole Arbor

Description and Applications

FLAP WHEEL DRUMS

AO: Flexible, quality aluminum oxide coated flaps easily conform to work pieces. • Cool finishing • For ferrous and non-ferrous metals. ZA: Firm, zirconia aluminum oxide coated flaps for long working life. • Fast and cool finishing • For steel, stainless and non-ferrous metals.

ALUMINUM OXIDE ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Surface Sander

Flap Wheel Drum with Keyhole SIZE

4 4 4 4

x x x x

4 4 4 4

x x x x

/ / 3/4 3/4

3 4

3 4

TOOL FIXTURE

GRIT

RPM

CARTON QTY.

ALUMINUM OXIDE UPC #

ZIRCONIA ALUMINUM OXIDE UPC #

19.1mm 19.1mm 19.1mm 19.1mm

40 60 80 120

9,500 9,500 9,500 9,500

5 5 5 5

72100 72101 72102 72103

72106 72107 72108 72109

Metal Surface Flap Wheel Drum Sander

Description and Applications ■

Machine provides shadow free, transitionless finishes on metal. Electronic control and speed preselection allows for versatility. All products on pages 44-45 fit this tool.

Metal Surface Flap Wheel Drum Sander

44

UPC#

DESCRIPTION

POWER INPUT

POWER OUTPUT

TOOL WIDTH

TOOL FIXTURE

75000

LP1503

11 Amp

700 Watts

100 mm

19 mm

Samples Available for Testing – Contact CGW for Details


FLAP WHEEL DRUMS Interleaf Flap Wheel Drums with Keyhole Arbor

Description and Applications ■

FLAP WHEEL DRUMS

Alternating flaps of non-woven and aluminum oxide coated abrasive materials for fast, uniform finishes. Medium grade drums provide consistent satin finishes

ALUMINUM OXIDE Surface Sander

Interleaf Flap Wheel Drum with Keyhole SIZE

4 4 4 4 4 4

x x x x x x

4 4 4 4 4 4

x x x x x x

/ / 3/4 3/4 3/4 3/4 3 4 3 4

GRIT

RPM

CARTON QTY.

UPC#

40 / Medium 60 / Medium 80 / Medum 120 / Medium 180 / Medium 240 / Medium

9,500 9,500 9,500 9,500 9,500 9,500

5 5 5 5 5 5

72110 72111 72112 72113 72114 72115

Non-Woven Flap Wheel Drums with Keyhole Arbor

Description and Applications ■

Quality, non-woven material impregnated with aluminum oxide grain for consistent finishes. For polishing, blending, deburring, cleaning and brightening stainless steel, aluminum, brass, copper and other alloys.

ALUMINUM OXIDE Surface Sander

Non-Woven Flap Wheel Drum with Keyhole SIZE

4 4 4 4

x x x x

4 4 4 4

x x x x

/ / 3/4 3/4 3 4 3 4

GRIT

RPM

CARTON QTY.

UPC#

Coarse Medium Fine Very Fine

9,500 9,500 9,500 9,500

5 5 5 5

72116 72117 72118 72119

Samples Available for Testing – Contact CGW for Details

45


Unmounted Flap Wheels Description and Applications

UNMOUNTED FLAP WHEELS

Quality aluminum oxide grain for consistent finishes. Unmounted flap wheels are recommended for cleaning, blending, deburring and finishing. Use on metal surfaces.

ALUMINUM OXIDE Bench Grinder

4 x 1 x 5/8

8,000 R.P.M.

5,000 R.P.M.

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

41025 41026 41027 41029 41031

40 Grit 60 Grit 80 Grit 120 Grit 180 Grit

10 10 10 10 10

41065 41066 41067 41069 41071

40 Grit 60 Grit 80 Grit 120 Grit 180 Grit

10 10 10 10 10

6x1x1

5,000 R.P.M.

8x1x1

4,000 R.P.M.

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

41045 41046 41047 41049 41051

40 Grit 60 Grit 80 Grit 120 Grit 180 Grit

5 5 5 5 5

41085 41086 41087 41089 41091

40 Grit 60 Grit 80 Grit 120 Grit 180 Grit

3 3 3 3 3

6 x 11/2 x 1

46

6x2x1

UPC#

5,000 R.P.M.

8x2x1

4,000 R.P.M.

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

41055 41056 41057 41059 41061

40 Grit 60 Grit 80 Grit 120 Grit 180 Grit

5 5 5 5 5

41096 41097 41099 41101

60 Grit 80 Grit 120 Grit 180 Grit

3 3 3 3

Samples Available for Testing – Contact CGW for Details


Premium Shop Rolls

Description and Applications ■

Premium shop roll backing is more flexible for longer working life. High quality friable grain

Hand Applications

Shop Rolls – Premium Aluminum Oxide GRIT

CARTON QTY

1" x 50 YDS.

1-1/2" x 50 YDS.

2" x 50 YDS.

MASTER PACK QTY

60 80 100 120 150 180 220 240 320 400

1 1 1 1 1 1 1 1 1 1

63062 63063 63064 63065 63066 63067 63068 63069 63070 63071

63072 63073 63074 63075 63076 63077 63078 63079 63080 63081

63082 63083 63084 63085 63086 63087 63088 63089 63090 63091

10 10 10 10 10 10 10 10 10 10

SHOP ROLLS

ALUMINUM OXIDE

Economy Shop Rolls

Description and Applications ■

Economy shop rolls for general purpose work.

ALUMINUM OXIDE Hand Applications

Shop Rolls – Economy Aluminum Oxide GRIT

CARTON QTY

1" x 50 YDS.

MASTER PACK QTY

1-1/2" x 50 YDS.

MASTER PACK QTY

2" x 50 YDS.

MASTER PACK QTY

60 80 100 120 150 180 220 240 320 400

1 1 1 1 1 1 1 1 1 1

63002 63003 63004 63005 63006 63007 63008 63009 63011 63012

20 20 20 20 20 20 20 20 20 20

63022 63023 63024 63025 63026 63027 63028 63029 63031 63032

10 10 10 10 10 10 10 10 10 10

63042 63043 63044 63045 63046 63047 63048 63049 63051 63052

10 10 10 10 10 10 10 10 10 10

Samples Available for Testing – Contact CGW for Details

47


File Belts

Description and Applications ■

BELTS

A3 - Aluminum Oxide: • General purpose grain on X-weight backing for rapid stock removal and long life. • For ferrous metals, stainless steel, non ferrous metals, composites, plastics and wood. Z3 - Zirconia: • Premium zirconia alumina grain on X-weight for aggressive use and heavy duty applications. • For steel and stainless steel.

ALUMINUM OXIDE ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

File Sander

File Belts - Min. qty. package is nested together and wrapped in paper SIZE

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 48

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

12 12 12 12 12 12 12 12 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 12 12 12 12 12 12 12 12

GRIT

MIN QTY

STD PACKAGE

A3 ALUMINUM OXIDE

Z3 ZIRCONIA

24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

61000 61001 61002 61003 61004 61005 61006 61007 61008 61009 61010 61011 61012 61013 61014 61015 61016 61017 61018 61019 61020 61021 61022 61023 61024 61025 61026 61027 61028 61029 61030 61031

61500 61501 61502 61503 61504 61505

61506 61507 61508 61509 61510 61511

61512 61513 61514 61515 61516 61517

61518 61519 61520 61521 61522 61523


File Belts - Min. qty. package is nested together and wrapped in paper SIZE

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 12 12 12 12 12 12 12 12 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24

MIN QTY

STD PACKAGE

A3 ALUMINUM OXIDE

Z3 ZIRCONIA

24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

61032 61033 61034 61035 61036 61037 61038 61039 61040 61041 61042 61043 61044 61045 61046 61047 61048 61049 61050 61051 61052 61053 61054 61055 61056 61057 61058 61059 61060 61061 61062 61063 61064 61065 61066 61067 61068 61069 61070 61071

61524 61525 61526 61527 61528 61529

61530 61531 61532 61533 61534 61535

BELTS

1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4

GRIT

61536 61537 61538 61539 61540 61541

61542 61543 61544 61545 61546 61547

61548 61549 61550 61551 61552 61553

49


BELTS

File Belts - Min. qty. package is nested together and wrapped in paper

50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

SIZE

GRIT

MIN QTY

STD PACKAGE

A3 ALUMINUM OXIDE

x x x x x x x x x x x x x x x x

24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

61072 61073 61074 61075 61076 61077 61078 61079 61080 61081 61082 61083 61084 61085 61086 61087

12 12 12 12 12 12 12 12 30 30 30 30 30 30 30 30

Z3 ZIRCONIA

61554 61555 61556 61557 61558 61559


Portable, Benchstand and Backstand Belts

Description and Applications ■

BELTS

A3 - Aluminum Oxide: • General purpose grain on X-weight backing for rapid stick removal and long life. • For ferrous metals, stainless steel, non ferrous metals, composites, plastics and wood. Z3 - Zirconia: • Premium zirconia alumina grain on X-weight for aggressive use and heavy duty applications. • For steel and stainless steel.

ALUMINUM OXIDE ZIRCONIA

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Portable Belt Sander

Benchstand Grinder

Backstand Belt Grinder

Portable, Benchstand and Backstand Belts SIZE

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

x x x x x x x x x x x x x x x x x x x x

42 42 42 42 42 42 42 42 42 42 42 42 60 60 60 60 60 60 60 60

GRIT

24 36 40 50 60 80 100 120 180 220 240 320 24 36 40 50 60 80 100 120

MIN QTY

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

STD PACKAGE

A3 ALUMINUM OXIDE

Z3 ZIRCONIA

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

61088 61089 61090 61091 61092 61093 61094 61095 61096 61097 61098 61099 61100 61101 61102 61103 61104 61105 61106 61107

61560 61561 61562 61563 61564 61565

61566 61567 61568 61569 61570 61571

Min. qty. package is nested together and wrapped in paper

51


BELTS

Portable, Benchstand and Backstand Belts 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

SIZE

GRIT

MIN QTY

STD PACKAGE

A3 ALUMINUM OXIDE

Z3 ZIRCONIA

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

200 200 200 200 200 200 200 200 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

61108 61109 61110 61111 61112 61113 61114 61115 61116 61117 61118 61119 61120 61121 61122 61123 61124 61125 61126 61127 61128 61129 61130 61131 61132 61133 61134 61135 61136 61137 61138 61139 61140 61141 61142 61143 61144 61145 61146 61147

61572 61573 61574 61575 61576 61577

90 90 90 90 90 90 90 90 48 48 48 48 48 48 48 48 60 60 60 60 60 60 60 60 72 72 72 72 72 72 72 72 90 90 90 90 90 90 90 90

Min. qty. package is nested together and wrapped in paper

52

61578 61579 61580 61581 61582 61583

61584 61585 61586 61587 61588 61589


Portable, Benchstand and Backstand Belts GRIT

MIN QTY

STD PACKAGE

A3 ALUMINUM OXIDE

Z3 ZIRCONIA

2 x 118 2 x 118 2 x 118 2 x 118 2 x 118 2 x 118 2 x 118 2 x 118 2 x 132 2 x 132 2 x 132 2 x 132 2 x 132 2 x 132 2 x 132 2 x 132 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21

24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 150 180 220 240 320 24 36 40 50 60 80 100 120 150 180 220 240 320

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50

61148 61149 61150 61151 61152 61153 61154 61155 61156 61157 61158 61159 61160 61161 61162 61163 61164 61165 61166 61167 61168 61169 61170 61171 61172 61173 61174 61175 61176 61177 61178 61179 61180 61181 61182 61183 61184 61185 61186 61187 61188 61189

61590 61591 61592 61593 61594 61595

61596 61597 61598 61599 61600 61601

BELTS

SIZE

61608 61609 61610 61611 61612 61613

Min. qty. package is nested together and wrapped in paper

53


BELTS

Portable, Benchstand and Backstand Belts SIZE

GRIT

MIN QTY

STD PACKAGE

A3 ALUMINUM OXIDE

3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 60 3 x 60 3 x 60 3 x 60 3 x 60 3 x 60 3 x 60 3 x 60 3 x 90 3 x 90 3 x 90 3 x 90 3 x 90 3 x 90 3 x 90 3 x 90 3 x 118 3 x 118 3 x 118 3 x 118 3 x 118 3 x 118 3 x 118 3 x 118 3 x 132 3 x 132 3 x 132 3 x 132 3 x 132 3 x 132 3 x 132 3 x 132

24 36 40 50 60 80 100 120 150 180 220 240 320 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

61190 61191 61192 61193 61194 61195 61196 61197 61198 61199 61200 61201 61202 61203 61204 61205 61206 61207 61208 61209 61210 61211 61212 61213 61214 61215 61216 61217 61218 61219 61220 61221 61222 61223 61224 61225 61226 61227 61228 61229 61230 61231 61232 61233 61234

Min. qty. package is nested together and wrapped in paper

54

Z3 ZIRCONIA

61602 61603 61604 61605 61606 61607

61614 61615 61616 61617 61618 61619


Portable, Benchstand and Backstand Belts GRIT

GRIT

CARTON QTY

A3 ALUMINUM OXIDE

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

24 36 40 50 60 80 100 120 150 180 220 240 320 24 36 40 50 60 80 100 120 150 180 220 240 320 24 36 40 50 60 80 100 120 150 180 220 240 320

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

61235 61236 61237 61238 61239 61240 61241 61242 61243 61244 61245 61246 61247 61248 61249 61250 61251 61252 61253 61254 61255 61256 61257 61258 61259 61260 61261 61262 61263 61264 61265 61266 61267 61268 61269 61270 61271 61272 61273

21 21 21 21 21 21 21 21 21 21 21 21 21 24 24 24 24 24 24 24 24 24 24 24 24 24 36 36 36 36 36 36 36 36 36 36 36 36 36

Z3 ZIRCONIA

BELTS

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

SIZE

Min. qty. package is nested together and wrapped in paper

55


BELTS

Portable, Benchstand and Backstand Belts SIZE

GRIT

MIN QTY

STD PACKAGE

A3 ALUMINUM OXIDE

Z3 ZIRCONIA

4 x 118 4 x 118 4 x 118 4 x 118 4 x 118 4 x 118 4 x 118 4 x 118 4 x 132 4 x 132 4 x 132 4 x 132 4 x 132 4 x 132 4 x 132 4 x 132 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 132 6 x 132 6 x 132 6 x 132 6 x 132 6 x 132 6 x 132 6 x 132

24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 24 36 40 50 60 80 100 120 150 180 220 240 320 24 36 40 50 60 80 100 120

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20

61274 61275 61276 61277 61278 61279 61280 61281 61282 61283 61284 61285 61286 61287 61288 61289 61290 61291 61292 61293 61294 61295 61296 61297 61298 61299 61300 61301 61302 61303 61304 61305 61306 61307 61308 61309 61310

61620 61621 61622 61623 61624 61625

Min. qty. package is nested together and wrapped in paper

56

61626 61627 61628 61629 61630 61631

61632 61633 61634 61635 61636 61637


SURFACE CONDITIONING

57


CONVOLUTE WHEELS Convolute Wheels Description and Applications ■

CONVOLUTE WHEELS

■ ■

CGW convolute wheels are made for long working life even if put in contact with sharp edges. Convolute wheels improve work surfaces without changing shapes or dimensions. Convolute wheels resist heating up and loading. Deburring Wheels • Designed for high stock removal, cool working and easy work piece conformability. • Quickly removes light burrs, blends machine & belt marks and applies final finishes. • For metal, plastic and composite materials.

SILICON CARBIDE ALUMINUM OXIDE

UPC#

SIZE

Deburring Wheels - General Purpose 70130 6 x 1/2 x 1 70131 6 x 1/2 x 1 70132 6 x 1/2 x 1 70133 6 x 1/2 x 1 70134 6x1x1 70135 6x1x1 70136 6x1x1 70137 6x1x1 70138 8 x 1/2 x 3 70139 8 x 1/2 x 3 70140 8 x 1/2 x 3 70141 8 x 1/2 x 3 70142 8x1x3 70143 8x1x3 70144 8x1x3 70145 8x1x3 70148 8x2x3 70149 8x2x3

Bench Grinder

Benchstand Grinder

DENSITY / GRAIN / GRADE

RPM

CARTON QTY

7 / S / Fine 8 / A / Medium 8 / S / Fine 9 / S / Fine 7 / S / Fine 8 / A / Medium 8 / S / Fine 9 / S / Fine 7 / S / Fine 8 / A / Medium 8 / S / Fine 9 / S / Fine 7 / S / Fine 8 / A / Medium 8 / S / Fine 9 / S / Fine 8 / S / Fine 9 / S / Fine

6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500

4 4 4 4 2 2 2 2 4 4 4 4 2 2 2 2 1 1

A=Aluminum Oxide, S=Silicon Carbide

58

Samples Available for Testing – Contact CGW for Details


CONVOLUTE WHEELS Deburring Wheels – Metal Finishing

Description and Applications ■

ALUMINUM OXIDE Bench Grinder

UPC#

SIZE

Deburring Wheels - Metal Finishing 70150 6x1x1 70151 6x2x1 70152 8x1x3 70153 8x2x3

DENSITY / GRAIN / GRADE

5 5 5 5

/ / / /

A A A A

/ / / /

Medium Medium Medium Medium

Benchstand Grinder

RPM

CARTON QTY

6,000 6,000 4,500 4,500

2 1 2 1

CONVOLUTE WHEELS

Made for uniform finishing and light deburring without changing work piece dimensions. Blend coated abrasive scratch patterns and tool marks. Provides uniform distinct satin, cosmetic, brushed and antique finishes. For metal, plastic and composite materials.

Deburring Wheels – Multi Finishing

Description and Applications ■

■ ■

Made for general purpose cleaning, rust removal and removal of discoloration from welds. For metal, plastic and composite materials. Long life, high stock removal, conforms to work piece.

SILICON CARBIDE Bench Grinder

UPC#

SIZE

Deburring Wheels - General Purpose 70154 6x1x1 70155 6x1x1 70156 6x2x1 70157 6x2x1 70159 8x1x3 70160 8x2x3

Benchstand Grinder

DENSITY / GRAIN / GRADE

RPM

CARTON QTY

2 / S / Coarse 2 / S / Medium 2 / S / Coarse 2 / S / Medium 2 / S / Medium 2 / S / Medium

6,000 6,000 6,000 6,000 4,500 4,500

2 1 2 1 2 1

Samples Available for Testing – Contact CGW for Details

59


UNITIZED WHEELS Unitized Wheels with Arbor Hole Description and Applications

UNITIZED WHEELS

Non-woven material impregnated with resin and compressed for finishing and long working life. Designed to resist tearing when working on sharp parts and edges. Easily deburrs, cleans, blends and polishes.

ALUMINUM OXIDE SILICON CARBIDE UPC#

SIZE

Unitized Wheels - with hole 72000 1 x 1 x 3/16 72001 1 x 1 x 3/16 72002 3 x 1/4 x 3/8 72003 3 x 1/4 x 3/8 72004 3 x 1/4 x 3/8 72005 3 x 1/4 x 3/8 72006 6 x 1/4 x 1 72007 6 x 1/4 x 1 72008 6 x 1/2 x 1 72009 6 x 1/2 x 1

Die Grinder

Bench Grinder

DENSITY / GRAIN / GRADE

RPM

CARTON QTY

6 / A / Medium 8 / A / Coarse 2 / S / Fine 2 / A / Medium 6 / S / Medium 8 / A / Coarse 2 / S / Fine 2 / S / Medium 2 / S / Fine 2 / S / Medium

35,100 35,100 15,100 15,100 15,100 15,100 7,500 7,500 7,500 7,500

40 40 25 25 25 25 20 20 10 10

A=Aluminum Oxide, S=Silicon Carbide

Unitized Quick Change Wheels – Roll On Description and Applications

■ ■

Designed for use on all disc sides which is ideal for hard to reach areas. Easily deburrs, cleans, blends and polishes. For metal, plastic and composite materials.

ALUMINUM OXIDE SILICON CARBIDE UPC#

SIZE

Unitized Wheels - Quick Change, Roll On 72040 2 72041 2 72042 2 72043 3 72044 3 72045 3

Die Grinder

Roloc

DENSITY / GRAIN / GRADE

RPM

CARTON QTY

2 / S / Fine 2 / A / Medium 6 / A / Medium 2 / S / Fine 2 / A / Medium 6 / A / Medium

22,100 22,100 22,100 15,100 15,100 15,100

10 10 10 10 10 10

A=Aluminum Oxide, S=Silicon Carbide

60

Samples Available for Testing – Contact CGW for Details


UNITIZED WHEELS Unitized Right Angle Grinder Wheels Description and Applications

UPC#

SIZE

ALUMINUM OXIDE SILICON CARBIDE

Type 27 Right Angle Grinder

DENSITY / GRAIN / GRADE

RPM

CARTON QTY

2 / S / Fine 3 / S / Fine 6 / A / Medium 2 / S / Fine 3 / S / Fine 6 / A / Medium 2 / S / Fine 6 / A / Medium 2 / S / Fine 6 / A / Medium

11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000

10 10 10 10 10 10 10 10 10 10

Unitized Fiberglass Backed Wheels 72050 41/2 x 7/8 72051 41/2 x 7/8 72052 41/2 x 7/8 1 72055 4 /2 x 5/8-11 72056 41/2 x 5/8-11 72057 41/2 x 5/8-11 72053 5 x 7/8 72054 5 x 7/8 72058 5 x 5/8-11 72059 5 x 5/8-11

UNITIZED WHEELS

Unitized material on a firm, long lasting backing for use on right angle grinders. Easily works on large and small areas to clean, blend, surface finish, and polish. For metal, plastic and composite materials.

A=Aluminum Oxide, S=Silicon Carbide

Type 27 Unitized Fiberglass Backed Wheels

Description and Applications ■

Very Fine: Light pressure for fine finishing and polishing; run at slower speeds for fine finish. Very conformable. Medium Fine: Light pressure for fine finishing and polishing. Highly conformable. Strong edge durability and high stock removal. Hard Medium: High stock removal and deburring; high cut rate with long life. Very strong edge durability; effective on stainless steel. UPC#

SIZE

GRAIN

Type 27 Unitized Fiberglass Backed Wheels 72070 41/2 x 7/8 AO 72071 41/2 x 5/8-11 AO 1 7 72072 4 /2 x /8 AO 72073 41/2 x 5/8-11 AO 1 7 72074 4 /2 x /8 AO 1 5 72075 4 /2 x /8-11 AO 72080 41/2 x 7/8 SC 1 5 72081 4 /2 x /8-11 SC 72082 41/2 x 7/8 SC 1 5 72083 4 /2 x /8-11 SC 72084 41/2 x 7/8 SC 1 5 72085 4 /2 x /8-11 SC

ALUMINUM OXIDE SILICON CARBIDE

Type 27 Right Angle Grinder

DENSITY / GRADE

RPM

CARTON QTY

Soft / Very Fine Soft / Very Fine Medium / Fine Medium / Fine Hard / Medium Hard / Medium Soft / Very Fine Soft / Very Fine Medium / Fine Medium / Fine Hard / Medium Hard / Medium

11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000

10 10 10 10 10 10 10 10 10 10 10 10

Samples Available for Testing – Contact CGW for Details

61


EZ STRIP WHEELS EZ Strip Wheels Description and Applications ■

EZ STRIP WHEELS

Non woven wheels for cleaning welds and fast removal of rust, scaling, oxidation, paints, sealants, and other clogging materials. EZ strip wheels can be used on stainless steel, steel, aluminum, titanium, non-ferrous metals, fibre glass, stone and wood. Red EZ strip wheels are more rigid for faster working on angled and irregular surfaces. Black EZ strip wheels clean and can provide a satin finish.

EZ Strip Wheels – Red

Right Angle Grinder

UPC#

SIZE

59204 59205 59208 59209 59206 59207

4/ x / 41/2 x 5/8-11 5 x 7/8 5 x 5/8-11 7 x 7/8 7 x 5/8-11 1 2

7 8

RPM

CARTON QTY

11,000 11,000 9,800 9,800 7,000 7,000

10 10 10 10 10 10

RPM

CARTON QTY

11,000 11,000 9,800 9,800 7,000 7,000

10 10 10 10 10 10

EZ Strip Wheels – Black UPC#

SIZE

59200 59201 59210 59211 59202 59203

4/ x / 41/2 x 5/8-11 5 x 7/8 5 x 5/8-11 7 x 7/8 7 x 5/8-11 1 2

7 8

EZ Strip Wheels – Roll On

Description and Applications ■

Roll-on attachment for easy attachment

EZ Strip Wheels – Red, Roll On

Die Grinder

UPC#

SIZE

RPM

CARTON QTY

59060 59062

2 x 1/2 3 x 1/2

16,000 10,500

10 10

EZ Strip Wheels – Black, Roll On

62

UPC#

SIZE

RPM

CARTON QTY

59061 59063

2x / 3 x 1/2

16,000 10,500

10 10

1 2

Samples Available for Testing – Contact CGW for Details


EZ Strip Wheels

With 1/2" Arbor Hole Description and Applications Q Q

Die Grinder

EZ Strip Single Wheels with 1/2" Arbor Hole – BLACK UPC#

SIZE

70038 70039 70040 70041 70042

4 5 6 7 8

x x x x x

/ 1/2 1/2 1/2 1/2 1 2

x x x x x

/ 1/2 1/2 1/2 1/2 1 2

RPM

CARTON QTY

8,000 6,000 5,500 4,500 4,000

10 10 10 10 10

RPM

CARTON QTY

8,000 5,500 4,000

10 10 10

EZ STRIP WHEELS

Die cut into a disc shape with no backing Discs can easily be paired for extended working life. Use the appropiate shaft when pairing.

EZ Strip Single Wheels with 1/2" Arbor Hole – RED UPC#

SIZE

70046 70047 70048

4x / x / 6 x 1/2 x 1/2 8 x 1/2 x 1/2 1 2

1 2

EZ Strip Shafts UPC#

SIZE

CARTON QTY

70043 70044 70045

1/4 x M8 shaft for EZ Strip Wheels 1/4 x M12 shaft for Single EZ Strip Wheels 5/16 x M8 shaft for Double EZ Strip Wheels

1 1 1

EZ Strip Wheels

With 1/4" Spindle Description and Applications Q

Spindle mount for quick attachment

Die Grinder

EZ Strip Single Wheels with 1/4" mounted spindle – BLACK UPC#

SIZE

RPM

CARTON QTY

70049 70050 70051

2 x 1/2 x 1/4 3 x 1/2 x 1/4 4 x 1/2 x 1/4

16,000 10,500 8,000

10 10 10

EZ Strip Double Wheels with 1/4" mounted spindle – BLACK UPC#

SIZE

RPM

CARTON QTY

70052 70053 70054

2 x 1 x 1/4 3 x 1 x 1/4 4 x 1 x 1/4

16,000 10,500 8,000

10 10 10

EZ Strip Wheels with 1/4" mounted spindle – RED UPC#

SIZE

RPM

CARTON QTY

70055 70056

4 x 1/2 x 1/4 4 x 1 x 1/4

8,000 8,000

10 10

Samples Available for Testing – Contact CGW for Details

63


SURFACE CONDITIONING DISCS

SURFACE CONDITIONING DISCS

64

Surface Conditioning Discs

Hook and Loop

Description and Applications Q

Q Q

Impregnated with abrasive grain for fast material removal Designed for long working life and resists loading Use on steel, stainless steel, aluminum, titanium and alloys, fibre glass, plastic and glass fibre

Surface Conditioning Discs

Right Angle Grinder

UPC#

SIZE

SPEC.

RPM

CARTON QTY

70000 70001 70002 70003 70004 70005 70006 70007 70008 70009 70010 70011 70012 70013 70014 70015 70016 70017 70018 70019 70020 70021 70022 70023 70024 70025 70026 70027 70028

4" 4" 4" 4" 4" 4" 41/2" 41/2" 41/2" 41/2" 41/2" 41/2" 5" 5" 5" 5" 5" 5" 6" 6" 6" 6" 7" 7" 7" 7" 8" 8" 8"

Coarse – Gold Medium – Maroon Very Fine – Grey Ultra Fine – Lt. Grey Heavy Duty – Brown Heavy Duty – Maroon Coarse – Gold Medium – Maroon Very Fine – Grey Ultra Fine – Lt. Grey Heavy Duty – Brown Heavy Duty – Maroon Coarse – Gold Medium – Maroon Very Fine – Grey Ultra Fine – Lt. Grey Heavy Duty – Brown Heavy Duty – Maroon Coarse – Gold Medium – Maroon Very Fine – Grey Extra Coarse – Brown Extra Coarse – Brown Coarse – Gold Medium – Maroon Very Fine – Grey Coarse – Gold Medium – Maroon Very Fine – Grey

13,000 13,000 13,000 13,000 13,000 13,000 12,000 12,000 12,000 12,000 12,000 12,000 10,000 10,000 10,000 10,000 10,000 10,000 7,000 7,000 7,000 7,000 6,000 6,000 6,000 6,000 4,800 4,800 4,800

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Samples Available for Testing – Contact CGW for Details


Hook and Loop

Description and Applications Q

Q Q

Impregnated with abrasive grain for fast material removal Designed for long working life and resists loading Use on steel, stainless steel, aluminum, titanium and alloys, fibre glass, plastic and glass fibre

Right Angle Grinder

Surface Conditioning Discs with Arbor Hole UPC#

SIZE

70029 70030 70031 70032 70033 70034 70035 70036 70037

4/ x / 41/2 x 7/8 41/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 1 2

7 8

SPEC.

RPM

CARTON QTY

Coarse – Gold Medium – Maroon Very Fine – Grey Coarse – Gold Medium – Maroon Very Fine – Grey Coarse – Gold Medium – Maroon Very Fine – Grey

12,000 12,000 12,000 10,000 10,000 10,000 6,000 6,000 6,000

10 10 10 10 10 10 10 10 10

SURFACE CONDITIONING DISCS

Surface Conditioning Discs

Backing Pads

Description and Applications Q Q

Q

4-8" pads with internal 5/8-11 threads 1/4" foam for medium stiffness and maximum grip for hook and loop discs *Polypropylene back-up pad for right angle surface conditioning discs

Backing Pads

Right Angle Grinder

UPC#

SIZE

CARTON QTY

49532 49533 49534 49535 49536 49537 *48224 *48225 *48226

4 x / -11 41/2 x 5/8 -11 5 x 5/8 -11 6 x 5/8 -11 7 x 5/8 -11 8 x 5/8 -11 1 4 /2 - polypropylene 5 - polypropylene 7 - polypropylene

1 1 1 1 1 1 1 1 1

5 8

Samples Available for Testing – Contact CGW for Details

65


SURFACE CONDITIONING HAND PADS

Premium Surface Conditioning Hand Pads

Description and Applications Q

Q

Q

Q Q

Q Q

Strong, yet flexible premium pad construction for surface preparation Maroon pads for removing rust removal, cleaning and surface preparation Grey pads for fine finishing and surface preparation Green pads for heavy duty cleaning White pads are constructed from a nonabrasive material for light duty cleaning Tan pads for rust removal and coarse finishes Black pads for aggressive use; heavy cleaning, deburring and finishing

6 x 9 Premium Non-Woven Hand Pads

Hand Applications

Bulk Shrunk Wrap Packs of 10

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

36287 36283 36284 36285 36286 71151

Maroon – All Purpose Grey – Ultra Fine Green – General Cleaning White – Light Duty Tan – Heavy Duty Black – Heavy Duty

20 20 20 20 20 60

36288

Maroon – Bulk

520

Surface Conditioning Hand Pads – Economy Description and Applications ■

Non-woven material engineered for surface preparation. Maroon – All Purpose • Impregnated with abrasive grain and synthetic resin for long-lasting, versatile use. • Recommended for removing rust and corrosion and in surface preparation and cleaning applications. Green – General Cleaning • Impregnated with medium abrasive grain for easy use and rinsing. • Recommended for cleaning all types of equipment, metal surfaces and other durable surfaces. White – Light Duty • Non-abrasive material does not make scratches and is long lasting. • Recommended for cleaning sensitive surfaces, metal, formica, solid surfaces, glass, and mirror.

Hand Applications

6 x 9 Non-Woven Hand Pads UPC#

SPEC.

CARTON QTY*

36241 36242 36243

Maroon – All Purpose Green – General Cleaning White – Light Duty

60 60 60

* Carton contains 6 packages of 10

66

Samples Available for Testing – Contact CGW for Details


See pages 39-44 for Flap Wheels.

Description and Applications ■

Alternating flaps of non-woven and coated abrasive materials for fast, uniform surface preparation and finishes. Medium grade wheels easily clean, blend, and debur aluminum & stainless steels, and ferrous & non-ferrous metals. Very fine grade wheels for satin finishing on aluminum & stainless steels, and ferrous and non-ferrous metals. Spindle mount for quick and easy changes.

2 x 1 x 1/4

Die Grinder

3 x 1 x 1/4

11,000 R.P.M.

UPC#

SPEC.

CARTON QTY

36207 36208 36209 36210

Medium 60 Grit Medium 80 Grit Very Fine 120 Grit Very Fine 180 Grit

10 10 10 10

8,000 R.P.M.

UPC#

SPEC.

36211 36212 36213 36214 3 x 2 x 1/4

Medium 60 Grit Medium 80 Grit Very Fine 120 Grit Very Fine 180 Grit

UPC#

SPEC.

CARTON QTY

36250 36215 36216 36217 36218

Extra Coarse Grit Medium 60 Grit Medium 80 Grit Very Fine 120 Grit Very Fine 180 Grit

10 10 10 10 10

2-4" Quick Change Discs – Surface Conditioning, Roll On ■ Q

CARTON QTY

10 10 10 10 8,000 R.P.M.

See pages 34-38 for Quick Change Discs.

For stainless steel, and ferrous & non-ferrous metals. Uses USA Developed, Automated Spin-Weld Attachment Process for Fast and Secure Fastening.

2" Diameter

SPEC.

CARTON QTY

59503 59504 59505 59608

Coarse – Brown Medium – Maroon A Very Fine – Blue S Ultra Fine – Grey

50 50 50 50

3" Diameter

Die Grinder

25,000 R.P.M.

UPC#

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59506 59507 59508 59609

Coarse – Brown Medium – Maroon A Very Fine – Blue S Ultra Fine – Grey

25 25 25 25

INTERLEAF WHEELS / QC CONDITIONING DISCS

Interleaf Wheels

4" Diameter

12,000 R.P.M.

UPC#

SPEC.

CARTON QTY

59509 59510 59511

Coarse – Brown Medium – Maroon A Very Fine – Blue

25 25 25

2-3" Quick Change Discs – Surface Conditioning, Turn On ■

For stainless steel, and ferrous & non-ferrous metals.

Die Grinder

2" Diameter

25,000 R.P.M.

3" Diameter

20,000 R.P.M.

UPC#

SPEC.

CARTON QTY

UPC#

SPEC.

CARTON QTY

59610 59611 59612

Coarse – Brown Medium – Maroon Very Fine – Blue

50 50 50

59614 59615 59616

Coarse – Brown Medium – Maroon Very Fine – Blue

25 25 25

Samples Available for Testing – Contact CGW for Details

67


SURFACE CONDITIONING FLAP DISCS / NON WOVEN FLAP WHEELS

Non Woven Flap Wheels Description and Applications

100% non woven aluminum oxide flap wheels provide excellent flexibility and conforms to work surface. Available in coarse, medium, and fine.

Die Grinder

1 x 1 x 1/4

12,000 R.P.M.

UPC#

SPEC.

CARTON QTY

36450 36451 36452 2 x 1 x 1/4

Coarse (Tan) Medium (Maroon) Fine (Maroon)

UPC#

SPEC.

CARTON QTY

36453 36454 36455

Coarse (Tan) Medium (Maroon) Fine (Maroon)

10 10 10

10 10 10 12,000 R.P.M.

3 x 1 x 1/4

10,000 R.P.M.

UPC#

SPEC.

36456 36457 36458 3 x 2 x 1/4

Coarse (Tan) Medium (Maroon) Fine (Maroon)

CARTON QTY

UPC#

SPEC.

CARTON QTY

36459 36460 36461

Coarse (Tan) Medium (Maroon) Fine (Maroon)

10 10 10

10 10 10 10,000 R.P.M.

Surface Conditioning Flap Discs

Description and Applications ■

Premium surface conditioning material for surface preparation. Three different grits for blending, deburring, and cleaning. For steel and stainless steel.

Type 29 Right Angle Grinder

UPC#

SIZE

GRIT

RPM

CARTON QTY

70120 70121 70122 70123 70124 70125

41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 7/8 1 4 /2 x 5/8-11 41/2 x 7/8 1 4 /2 x 5/8-11

Coarse – Brown Coarse – Brown Medium – Maroon Medium – Maroon Very Fine – Blue Very Fine – Blue

13,300 13,300 13,300 13,300 13,300 13,300

10 10 10 10 10 10

See pages 12-26 for More Flap Discs.

68

Samples Available for Testing – Contact CGW for Details


RESIN BONDED WHEELS

69


RESIN BONDED WHEELS

THE RIGHT ABRASIVE FOR

Right Angle Grinder

Right Angle Grinders – Page 72-83 ■ Quickie Cut™ Cut-Off Wheels ■ Quickie Cut™ EXTREME Wheels ■ Super Quickie Cut™ Cut-Off Wheels ■ Contaminate-Free Cut-Off Wheels ■ 3/32" Quickie Cut™ Cut-Off Wheels ■ .094 3-in-1 Wheels Cut/Grind/Finish ■ .075 Super Quickie Cut™ Cut/Grind Combo Wheels ■ Depressed Center Wheels Die Grinders – Page 84-85 ■ 1-1/2" – 4" Cut-Off Wheels

Die Grinder

Circular Saws – Page 86 ■ 7" Cut-Off Wheels Circular Saw

Stationary Saws – Page 86-87 ■ 10" – 20" Cut-Off Wheels Stationary Saw

Chop Saws – Page 88-89 ■ 10" – 16" Cut-Off Wheels Chop Saw

Gas Saws – Page 90-92 ■ 12" – 16" Cut-Off Wheels ■ 14" – 16" Rail Wheels Gas Saw

70

Samples Available for Testing – Contact CGW for Details


ALL YOUR TOOL NEEDS

1/4" Grinding, .25, 6.4mm

1/8" Pipeline Cutoff, .16, 4mm 1/8" Cutoff, .125, 3.2mm 1/8" Cutoff, .125, 3.0mm 3/32" 3-in-1 Cut/Grind/Finish Combo, .094, 2.5mm 3/32" Cutoff, .094, 2.4mm 5/64" Cut/Grind Combo, .075, 1.9mm T27 Quickie Cut, .045, 1.6mm

QUICKIE CUT™ CUT-OFF WHEELS

CGW has the Broadest Resin Bonded Wheel Program in the Industry

T1 Quickie Cut, .045, 1.6mm T1 Quickie Cut, .035, 1.2mm T1 Super Quickie, .035, 1mm

Quickie Cut™ Thin Cut-Off Wheels – The Market Leader in Performance Less cutting resistance for faster working ■ Less dust generation ■ Less work piece waste ■ Less burrs and sparks ■ Less vibration for easier operation ■ Engineered for longer machine life ■ All CGW cut-off wheels easily cut carbon and stainless steels with one disc. ■ Contaminate-Free wheels contain )0.1% iron, sulfur, or chlorine for rustfree and corrosion-free results. CGW wheels are made from premium abrasive grains, top quality fiberglass reinforcements and top of the line fully automated equipment. ■

Tips for Selecting the Right Wheel: ■ All CGW Thin Cut-Off Wheels cut steel and stainless steel. ■ Contaminate-Free wheels cut steel and stainless steels freely and contain )0.1% iron, sulfur, or chlorine. ■ The finer the grit (60 grit), the thinner the wheel - for quick cutting action ■ The larger the grit (36 grit), the thicker the wheel - for longer working life All CGW Quickie Cut™ and ULTRA branded wheels are made to standards (highgrade production and high safety test standards). See page 127 for more information.

Samples Available for Testing – Contact CGW for Details

71


QUICKIE CUT™ CUT-OFF WHEELS

CUTTING WHEEL CHOICE Quickie Cut™ Reinforced Cut-Off Wheels – Type 1 Description and Applications ■

ZA60-TB-Flex: Flexible wheel design for fast cutting and easy work penetration. ZA-36-T-Rigid: Thicker (.045), rigid wheel design for fast cutting and longer life.

ZA60-TB-Flex

ZIRCONIA AO

ZA36-T – Rigid

ALUMINUM OXIDE

Type 1 Right Angle Grinder

Quickie Cut™ EXTREME SUPER Quickie Cut™ Reinforced Cut-Off Wheels Reinforced Cut-Off Wheels – Type 1 – Type 1 Description and Applications

Description and Applications ■

ZA60-T: Higher percentage of patented, specially treated zirconia grain and premium fiberglass. • Provides up to 10% more cuts, better finish, reduces burning and produces fewer burrs. • Flexible and long life (highest G-ratio).

A60-T: Maximum cutting speeds with minimal burrs. • Provides excellent finish with reduced vibration. • #1 wheel for steel applications.

All CGW Cut-Off Wheels Cut Steel and Stainless Steel QUICKIE-CUT

72

SIZE

RPM

CARTON QTY.

ZA60-TB-FLEX

4 x .040 x 5/8 41/2 x .035 x 7/8 41/2 x .040 x 7/8 41/2 x .045 x 7/8 5 x .040 x 7/8 5 x .045 x 7/8 6 x .040 x 3/8 6 x .040 x 1/2 6 x .040 x 5/8 6 x .040 x 7/8 6 x .045 x 7/8 7 x 1/16 x 7/8 9 x 1/16 x 5/8

19,000 13,300 13,300 13,300 12,250 12,250 10,200 10,200 10,200 10,200 10,200 8,500 6,600

25 25 25 25 25 25 25 25 25 25 25 25 25

45014 45010

QUICKIE-CUT EXTREME

SUPER QUICKIE-CUT

ZA36-T-RIGID

ZA60-T

A60-T

35514

45224

35516

35517 35518 45100

SUPER QUICKIE CARTON QTY.

45102

50

45226

45105

50

45227

45106

50

45011 45051 45050 45016 45012 45013

Samples Available for Testing – Contact CGW for Details


FOR METAL AND STEEL

Description and Applications ■

ZA:

Zirconia and Aluminum Oxide mixture. General purpose wheel. Zirconia grain allows for faster cutting and longer life. Excellent on Steel/Stainless. A46N-ALU: Aluminum Oxide mixture. Contains a non-loading bond. Good on Aluminum.

ZIRCONIA

Type 27

ALUMINUM OXIDE

Right Angle Grinder

ALUMINUM

Quickie Cut™ EXTREME SUPER Quickie Cut™ Reinforced Cut-Off Wheels Reinforced Cut-Off Wheels – Type 27 – Type 27 Description and Applications ■

QUICKIE CUT™ CUT-OFF WHEELS

Quickie Cut™ Thin Reinforced Cut-Off Wheels – Type 27

Description and Applications

ZA60-T: Higher percentage of patented, specially treated zirconia grain and premium fiberglass. • Provides up to 10% more cuts, better finish, reduces burning and produces fewer burrs.

High performance extra-thin wheels – Our thinnest in the market! Cuts Carbon and Stainless Steels – Maximum cuts with one wheel. #1 Wheel for steel applications. Maximum cutting speeds with minimal burrs. A60T Super Quickie-Cut • High performance wheels, maximum cuts with one wheel. • Maximum cutting speeds with minimal burrs.

■ ■ ■

All CGW Cut-Off Wheels Cut Steel and Stainless Steel QUICKIE-CUT SIZE

RPM

CARTON QTY.

ZA60-S

4 x .040 x 5/8 41/2 x .045 x 7/8 5 x .045 x 7/8 6 x .045 x 7/8 7 x 1/16 x 7/8 9 x 1/16 x 7/8

19,000 13,300 12,250 10,200 8,500 6,600

25 25 25 25 25 25

45001 45002 45005 45007 45008 45047

QUICKIE-CUT EXTREME

SUPER QUICKIE-CUT

A46N-ALU

ZA60-T

A60-T

45004 70114 70115

45225

45103

50

45228

45098

50

Samples Available for Testing – Contact CGW for Details

SUPER QUICKIE CARTON QTY.

73


QUICKIE CUT™ CONTAMINATE-FREE CUT-OFF WHEELS

CUTTING WHEEL CHOICE Quickie Cut™ Contaminate-Free Cut-Off Wheels – Type 1 Description and Applications ■

Contaminate free wheels contains )0.1% iron, sulfur, or chlorine for rustfree and corrosion-free results. High quality grain mixture is more friable and cuts freely. WA: White Aluminum Oxide grain for stainless steel, food grade, and nuclear applications.

WHITE AO ALUMINUM OXIDE

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

Type 1

WA60-B-Flex

WA36-T – Rigid

Quickie Cut™ EXTREME Super Quickie Cut™ Contaminate-Free Reinforced Contaminate-Free Reinforced Cut-Off Wheels – Type 1 Cut-Off Wheels – Type 1 Description and Applications ■

Description and Applications

WA60-T: Higher percentage of patented, specially treated zirconia grain and premium fiberglass. • Provides up to 10% more cuts, better finish, reduces burning and produces fewer burrs.

High performance wheels, maximum cuts with one wheel. Maximum cutting speeds with minimal burr and smoother finish.

Type 1 Reinforced Quickie-Cut™ Cut-Off Wheels QUICKIE-CUT

74

SIZE

RPM

CARTON QTY.

41/2 x .035 x 7/8 41/2 x .045 x 7/8 5 x .040 x 7/8 5 x .045 x 7/8 6 x .045 x 7/8

13,300 13,300 12,250 12,250 10,200

25 25 25 25 25

WA60-TB-FLEX

QUICKIE-CUT EXTREME

SUPER QUICKIE-CUT

WA36-T-RIGID

WA60-T

A60-T

35515

45229 45230

45041 45042

50 50

36301 36302

45231 45232

45104 45080

50 50

36303

SUPER QUICKIE CARTON QTY.

36304

Samples Available for Testing – Contact CGW for Details


Quickie Cut™ Contaminate-Free Cut-Off Wheels – Type 27 Description and Applications ■

Contaminate free wheels contains )0.1% iron, sulfur, or chlorine for rustfree and corrosion-free results. High quality grain mixture is more friable and cuts freely. WA: White Aluminum Oxide grain for stainless steel, food grade, and nuclear applications.

WHITE AO CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

ALUMINUM OXIDE

Right Angle Grinder

Type 27

Quickie Cut™ EXTREME Super Quickie Cut™ Contaminate-Free Reinforced Contaminate-Free Reinforced Cut-Off Wheels – Type 27 Cut-Off Wheels – Type 27 Description and Applications ■

Description and Applications

WA60-T: Higher percentage of patented, specially treated zirconia grain and premium fiberglass. • Provides up to 10% more cuts, better finish, reduces burning and produces fewer burrs.

High performance wheels, maximum cuts with one wheel. Maximum cutting speeds with minimal burr and smoother finish.

QUICKIE CUT™ CONTAMINATE-FREE CUT-OFF WHEELS

FOR STAINLESS STEEL

Type 27 Reinforced Quickie-Cut™ Cut-Off Wheels QUICKIE-CUT

QUICKIE-CUT EXTREME

SUPER QUICKIE-CUT

✔ ✔ ✔ ✔ ✔ • ✔ ✔ ✔ ✔ ✔ ✔ ✔ • ✔ ✔

Titanium

ZA36T / A60T ZA60T / ZA60S A46N-ALU WA36-T – Contaminate-Free WA60T / WA60-R – Contaminate-Free ZA60S ✔ = Recommended • = May Be Used

50

Brass, Bronze

SPEC.

Copper

Application Chart – All Quickie Cut™ Cut-Off Wheels

Aluminum Alloys

45099

Gray Cast Iron

45233

Cast Steel

45003 45006 45017 45009

Rail Cutting

25 25 25 25

Stainless Steel Bars

13,300 12,250 10,200 10,200

Stainless Steel Sheets

41/2 x .045 x 7/8 5 x .045 x 7/8 6 x .045 x 7/8 7 x 1/16 x 7/8

High Tensile Steel

A60-T

Wall Studs

WA60-T

Pipe Line

WA60-R

Metal Decking & Cable

CARTON QTY.

Iron / Steel Bar

RPM

Angle Iron – General

SIZE

SUPER QUICKIE CARTON QTY.

• • •

• • •

• • • • • ✔ •

• • • • ✔ ✔ • • • • • ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ FERROUS METALS CASTINGS NON-FERROUS METALS

Samples Available for Testing – Contact CGW for Details

75


THIN REINFORCED CUT-OFF WHEELS – TYPE 1 & 27

QUICKIE CUT™ CUT-OFF WHEELS Quickie Cut™ 3/32 (.094 / 2.5mm) Thin Reinforced Cut-Off Wheels T1 & T27

ed

v ro

p

Im

Description and Applications

WA: Aluminum Oxide – Metal & Stainless • 3/32" (.094) thickness for cutting/notching wheels. Externally reinforced with a unique bond for long wheel life and faster cutting action.

WHITE AO

Type 1

Type 1 UPC#

SIZE

45028 45030 45046 45032

4/ x / 5 x 3/32 6 x 3/32 7 x 3/32 1 2

x / x 7/8 x 7/8 x 7/8

3 32

7 8

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

SPEC.

RPM

CARTON QTY

WA36-S-BF WA36-S-BF WA36-S-BF WA36-S-BF

13,300 12,250 10,200 8,500

25 25 25 25

SPEC.

RPM

CARTON QTY

WA36-S-BF WA36-S-BF WA36-S-BF WA36-S-BF WA36-S-BF WA36-S-BF WA36-S-BF WA36-S-BF WA36-S-BF WA36-S-BF WA36-S-BF

15,300 13,300 13,300 12,250 12,250 10,200 10,200 8,500 8,500 6,600 6,600

25 25 10 25 10 25 10 25 10 25 10

Type 27

Type 27 UPC#

SIZE

45019 45020 45021 45022 45023 45024 45025 45026 45027 45113 45114

4x / x / 41/2 x 3/32 x 7/8 41/2 x 3/32 x 5/8-11 5 x 3/32 x 7/8 5 x 3/32 x 5/8-11 6 x 3/32 x 7/8 6 x 3/32 x 5/8-11 7 x 3/32 x 7/8 7 x 3/32 x 5/8-11 9 x 3/32 x 7/8 9 x 3/32 x 5/8-11 3 32

5 8

1.9mm, 2.5mm, 3.2mm & 4mm Wheel Thickness Profile gh

W u NEthron k a sig re De

B

ed

ov

r mp

I

5/64" Cut/Grind Combo, .075, 1.9mm 3/32" Cutoff, .094, 2.5mm 3/32" 3-in-1 Cut/Grind/Finish Combo, .094, 2.5mm 1/8" Cutoff, .125, 3.2mm

I

76

ed

ov

r mp

1/8" Cut/Grind Pipeline, .16, 4mm

Samples Available for Testing – Contact CGW for Details


NEW INNOVATION 3-in-1 Wheels .094 Cut/Grind/Finish

Description and Applications ■

ALUMINUM OXIDE

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

COMBINATION WHEELS

High performance wheels made to cut quickly, grind easily and finish work surfaces with ONE wheel. Contaminate free wheel has )0.1% iron, sulfur, or chlorine for rustfree and corrosion-free results. Cost effective wheel eliminates frequent wheel changes and increases production times. Fiberglass net reinforcement provides added strength and flexibility. For stainless steel and steel. Right Angle Grinder

Type 27

Type 27 Cut/Grind/Finish Wheels – High Performance UPC#

SIZE

SPEC.

RPM

CARTON QTY

45218 45219 45220 45221 45222 45223

41/2 x .094 (3/32) x 7/8 1 4 /2 x .094 (3/32) x 5/8-11 5 x .094 (3/32) x 7/8 5 x .094 (3/32) x 5/8-11 6 x .094 (3/32) x 7/8 6 x .094 (3/32) x 5/8-11

A36S A36S A36S A36S A36S A36S

13,300 13,300 12,250 12,250 10,200 10,200

25 10 25 10 25 10

Super Quickie Cut .075 Cut/Grind Combo Wheels

View New Product Video at www.cgwheels.com Description and Applications ■

Extra thin high performance cut-off wheels – cut and grind with one wheel. Save production time and costs. Breakthrough .075 thin design for minimal cutting resistance for faster cutting action – cuts quicker than thicker pipeline wheels. Thin cutting wheels remove less material, have fewer sparks and minimal burrs. Three layers of fiberglass and high quality aluminum oxide grain for long working life. For stainless steel and steel.

ALUMINUM OXIDE

Type 27 CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

Right Angle Grinder

Type 27 Cut/Grind Combo Wheels – High Performance UPC#

SIZE

SPEC.

RPM

CARTON QTY

70094 70095 70096 70097

41/2 x .075 (5/64) x 7/8 41/2 x .075 (5/64) x 5/8-11 5 x .075 (5/64) x 7/8 5 x .075 (5/64) x 5/8-11

A46U A46U A46U A46U

13,300 13,300 12,250 12,250

25 10 25 10

Samples Available for Testing – Contact CGW for Details

77


DEPRESSED CENTER WHEELS – TYPE 27

1/8” CUTTING/NOTCHING WHEELS Depressed Center Wheels 1/8" (.125 Thick; 3.2mm) Cutting & Notching Wheels Description and Applications

ULTRA ■ Premium wheels made from superior raw materials and advanced technologies for longer working life. ■ Ultra Wheels give consistent cutting action for quicker and easier working. ■ A24R: Aluminum oxide grain. R-grade bond for fast cutting and long life. Works well on steel, cast iron, and welds. d ve o ■ WA24S: White aluminum oxide grain pr Im with S-grade bond. Contaminate CONTAMINATE-FREE Free wheel for fast cutting of Iron, Sulfur, and Chlorine 0.1% stainless steel, ferrous metals, food grade, and nuclear applications. Contains )0.1% iron, sulfur, or chlorine for rust-free and corrosion-free results. ■ ZA24T: Zirconia aluminum oxide grain mixture with T-grade bond. High performance design for fast cutting and longer life. Excellent cutting of ferrous metals and stainless steels.

ALUMINUM OXIDE WHITE AO

Type 27 Right Angle Grinder

ZIRCONIA

A24Q Fast Cut: Aluminum oxide grain. Q-grade bond for fast cutting. (Economical choice for metal, steel and general applications.)

T27 Depressed Center Wheels 1/8" Cutting & Notching (.125 Thick; 3.2mm) ULTRA - New and Improved

SIZE

RPM

CARTON QTY.

3 x 1/8 x 3/8 4 x 1/8 x 3/8 4 x 1/8 x 5/8 41/2 x 1/8 x 7/8 1 4 /2 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 6 x 1/8 x 7/8 6 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 9 x 1/8 x 7/8 9 x 1/8 x 5/8-11

19,100 15,300 15,300 13,300 13,300 12,250 12,250 10,200 10,200 8,600 8,600 6,650 6,650

25 25 25 25 10 25 10 25 10 25 10 25 10

METAL/STAINLESS

STAINLESS/METAL

METAL

METAL

ZA24T

WA24S

A24R

FAST CUT A24Q

45043* 45044* 35614 35615 45210 45211 45212 45213 45214 45215 45216 45217

New items are in bold * While supplies last

1/8" Wheel Profile

35616 35617 45037 45038 36189 36190 35638 35639 35652 35653

35612 35613 35675 35676 35630 35631 35634 35635 35648 35649

45052 35671 35609 36219 36220 36221 36222 36223 36224 36225 36226 36227 36228

1/4" Grinding, .25, 6.4mm

1/8" Pipeline Cutoff, .16, 4mm 1/8" Cutoff, .125, 3.2mm 3/32" Cutoff, .094, 2.4mm 78

Samples Available for Testing – Contact CGW for Details


1/8” PIPELINE WHEELS 1/8" Pipeline Wheels (.16 Thick; 4mm) Description and Applications

Pipeline wheels are engineered for cutting and light grinding, as well as, pipeline applications such as cutting and light grinding of pipeline root pass, or welds. ULTRA ■ Premium wheels made from superior raw materials and advanced technologies for longer working life. ■ Ultra Wheels give consistent cutting action for quicker and easier working. ed v ■ A24T: Aluminum oxide grain with T-grade bond o pr Im for fast cutting of ferrous metals. ed v o ■ ZA24T: Zirconia aluminum oxide grain mixture with pr Im T-grade bond. High performance design for fast cutting and longer life. Excellent cutting of ferrous metals and stainless steels.

ALUMINUM OXIDE ZIRCONIA

Type 27 Right Angle Grinder

A24T Fast Cut: Aluminum oxide single grain wheel. Designed for cutting and light grinding as well as pipeline applications such as cutting and light grinding of pipeline root pass, or weld and flame cut grinding. Economical choice.

T27 Depressed Center Wheels 1/8" Pipeline – 25% Thicker (.16 Thick; 4mm) ULTRA - New and Improved METAL/STAINLESS

METAL

METAL FAST CUT A24T

SIZE

RPM

CARTON QTY.

ZA24T

A24T

4 x 1/8 x 5/8 41/2 x 1/8 x 7/8 41/2 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 6 x 1/8 x 7/8 6 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 9 x 1/8 x 7/8 9 x 1/8 x 5/8-11

15,300 13,300 13,300 12,250 12,250 10,200 10,200 8,600 8,600 6,650 6,650

25 25 10 25 10 25 10 25 10 25 10

35667 35665 45204 45205 45203 45202 35681 35682 35683 37670

35666 35664 45200 45201 45206 45207 35679 35680 35662 35663

DEPRESSED CENTER WHEELS – PIPELINE

Depressed Center Wheels

45045 59100 59101 36244 36245 36246 36247 36229 36230 36248 36249

New items are in bold

Clay Pipe

Solid Bricks

Firing Bricks

Paving Bricks

Marble

Masonry

Slate

Roof – Tiles

Concrete

Asphalt / Green Concrete

Titanium

Brass, Bronze

Copper

Aluminum Alloys

Ductile Iron Pipe & Concrete

Gray Cast Iron

Cast Steel

Rail Cutting

Stainless Steel Bars

Stainless Steel Sheets

High Tensile Steel

Wall Studs

Pipe Line

Metal Decking & Cable

Iron / Steel Bar

SPEC.

Angle Iron – General

Application Chart – 1/8" Cutting/Notching and 1/8" Pipeline

A24R A24T C24R WA24S ZA24T

✔ ✔ • ✔ • • • • ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ • ✔ ✔ • • • • • • ✔ ✔ ✔ • ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ • • • • ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ FERROUS METALS CASTINGS NON-FERROUS MASONRY ✔ = Recommended METALS • = May Be Used Samples Available for Testing – Contact CGW for Details

79


DEPRESSED CENTER WHEELS – GRINDING

ULTRA 1/4” GRINDING WHEELS Depressed Center Wheels Type 27 1/4" Grinding Wheels Description and Applications

ULTRA ■ Premium wheels made from superior raw materials and advanced technologies for longer working life. ■ Ultra Wheels give consistent grinding action for quicker and easier working. ■ ZA24T: Zirconia Aluminum Oxide Grain • Zirconia grain is sharper, cuts faster, and lasts longer than aluminum oxide grain. • T-grade bond for fast CONTAMINATE-FREE Iron, Sulfur, and cutting and longer life. Chlorine 0.1% • Recommended for steel, cast iron, and stainless steel. ■ WA24S: White Aluminum Oxide Grain – Stainless Steel • Contaminate-Free design for fast cutting of stainless steel, ferrous metals, food grade, and nuclear applications. • Contains )0.1% iron, sulfur, or chlorine for rust-free and corrosion-free results. • S-grade bond. ■ A24N Aluminum Oxide Grain • N-grade bond for fast stock removal. • For metal and stainless. ■ A24R: Aluminum Oxide Grain • #1 selling 1/4" Depressed Center Grinding Wheel. • R-grade bond for longer life and excellent stock removal.

ZIRCONIA

Type 27

WHITE AO

Right Angle Grinder

ALUMINUM OXIDE

T27 Depressed Center Wheels 1/4" for Grinding (.25 Thick; 6.4mm) ULTRA - New and Improved

SIZE

4x / x / 4 x 1/4 x 5/8 41/2 x 1/4 x 7/8 1 4 /2 x 1/4 x 5/8-11 5 x 1/4 x 7/8 5 x 1/4 x 5/8-11 6 x 1/4 x 7/8 6 x 1/4 x 5/8-11 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11 1 4

3 8

METAL/STAINLESS

STAINLESS/METAL

METAL

METAL

RPM

CARTON QTY.

ZA24T

WA24S

A24N

A24R

15,300 15,300 13,300 13,300 12,250 12,250 10,200 10,200 8,600 8,600 6,600 6,600

25 25 25 10 25 10 25 10 25 10 25 10

45036* 35611* 35624 35625 37535 37530 45039 45040 35644 35645 35658 35659

35673 35674 37543 37531 45048 45049 35677 35678 45081 45082

36400 36401 36402 36403 36404 36405 36406 36407 36408 36409

35620 35621 35626 35628 35632 35633 35640 35641 35654 35655

* While supplies last

80

Samples Available for Testing – Contact CGW for Details


FAST CUT 1/4” GRINDING WHEELS

1/4" Grinding Wheels Description and Applications ■

A24N Fast Cut: Aluminum Oxide Grain • Soft N-grade bond for fast stock removal. • Excellent ratio of stock removal/wheel loss. • Economical choice for metal and low-grade stainless. A24R Fast Cut: Aluminum Oxide Grain • Economical choice for fast metal grinding. • Premium Grain. A24T Fast Cut: Aluminum Oxide Grain • Hard T-grade bond for longer life. • Recommended for metal, edge grinding or when a harder a wheel is needed.

ALUMINUM OXIDE Right Angle Grinder

Type 27

T27 Depressed Center Wheels 1/4" for Grinding (.25 Thick; 6.4mm) SIZE

3x / x / 4 x 1/4 x 3/8 4 x 1/4 x 5/8 41/2 x 1/4 x 7/8 41/2 x 1/4 x 5/8-11 5 x 1/4 x 7/8 5 x 1/4 x 5/8-11 6 x 1/4 x 7/8 6 x 1/4 x 5/8-11 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11 1 4

3 8

METAL

METAL

METAL FAST CUT A24T

RPM

CARTON QTY.

FAST CUT A24N

FAST CUT A24R

18,000 15,300 15,300 13,300 13,300 12,250 12,250 10,200 10,200 8,600 8,600 6,600 6,600

25 25 25 25 10 25 10 25 10 25 10 25 10

45053 35672 35699 35622 35623 35627 35629 36231 36232 35642 35643 35656 35657

35610 36255 36256 36257 36258 36259 36260 36261 36262 36263 36264

DEPRESSED CENTER WHEELS – GRINDING

Fast Cut Depressed Center Wheels Type 27 & Type 28

36102 36103

36104 36105

Type 28

T28 Depressed Center Wheels 1/4" for Grinding METAL SIZE

RPM

CARTON QTY.

FAST CUT A24R

7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11

8,600 8,600 6,600 6,600

25 10 25 10

35646 35647 35660 35661

Hub Adaptor Kit UPC#

SIZE/SPEC.

CARTON QTY

48228

CP-50 Adapter Kit

10

Samples Available for Testing – Contact CGW for Details

81


FGF WHEELS FGF Wheels

Flex, Grind, Finish

Description and Applications Q

FGF WHEELS

Q

Q

Waffle pattern on wheel face for cooler grinding and longer working life Engineered to absorb vibrations for reduced operator fatigue Recommended for metal, steel, aluminum, stainless steel and non-ferrous metals Type 27

WHITE AO FGF-Special Wheels

Right Angle Grinder

UPC#

SIZE

SPEC.

RPM

CARTON QTY

36265 36266 36267 36268 36269 36270

41/2 x 1/8 x 7/8 1 4 /2 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11

WA46-Q-BF WA46-Q-BF WA46-Q-BF WA46-Q-BF WA46-S-BF WA46-S-BF

13,300 13,300 12,250 12,250 8,600 8,600

25 10 25 10 25 10

FGF-Special Wheels Flex, Grind, Finish

Description and Applications Q

Q

Q

Q

Raised knob pattern on wheel face for exceptionally cool grinding and no material load up Engineered for easy grinding and blending on curved and straight work pieces without gouging Recommended for metal, steel, aluminum, stainless steel, cast iron and non-ferrous metals. No back-up pad required

Type 29

ALUMINUM OXIDE Right Angle Grinder

FGF-Special Wheels

82

UPC#

SIZE

36271 36272 36273 36274 36275 36276 36277 36278 36279 36280 36281 36282

4/ x / x / 41/2 x 1/8 x 5/8-11 41/2 x 1/8 x 7/8 1 4 /2 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 1 2

1 8

7 8

SPEC.

RPM

CARTON QTY

A36-R-BF A36-R-BF A60-R-BF A60-R-BF A36-R-BF A36-R-BF A60-R-BF A60-R-BF A36-R-BF A36-R-BF A60-R-BF A60-R-BF

13,300 13,300 13,300 13,300 12,250 12,250 12,250 12,250 8,600 8,600 8,600 8,600

25 10 25 10 25 10 25 10 25 10 25 10

Samples Available for Testing – Contact CGW for Details


Description and Applications ■

Premium AO Grain – Aluminum A30N: • Type 27 grinding wheels for aluminum guaranteed to outperform competitor wheels. • Soft N-grade bond for easy grinding of welding seams, sprues, and cast iron skin. • Recommended for aluminum, copper, zinc, and other soft materials. Fast Cut AO Grain – Aluminum A30N: • Aluminum Oxide and Silicon Carbide grain mixture for easy grinding of soft metals. • Recommended for non-ferrous metals. Fast Cut C24R: Silicon Carbide Grain – Concrete • Silicon Carbide grain and R-grade bond for easy working on masonry, concrete, and stone.

ALUMINUM SILICON CARBIDE

Type 27 Right Angle Grinder

T27 & T28 Depressed Center Wheels 1/4" for Grinding (.25 Thick; 6.4mm) ALUMINUM SIZE

RPM

CARTON QTY.

T27 A30N

4 x 1/4 x 5/8 41/2 x 1/4 x 7/8 1 4 /2 x 1/4 x 5/8-11 5 x 1/4 x 7/8 5 x 1/4 x 5/8-11 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11

15,300 13,300 13,300 8,600 8,600 8,600 8,600 6,600 6,600

25 25 10 25 10 25 10 25 10

36106 36107 36108 36109 36110 36111 36112 36156 36157

ALUMINUM

CONCRETE/STONE

CONCRETE/STONE

DEPRESSED CENTER WHEELS – CONCRETE

Depressed Center Wheels – Type 27 & 28

FAST CUT T27 A30N FAST CUT T27 C24R FAST CUT T28 C24R

70098 70099 70100 70101 70102 70103 70104

37510 37520 37525

37545 37540 37555 37550

35698 36597 36289 36290

*New items are in bold

T27 Depressed Center Wheels 1/8" for Cutting & Notching (.125 Thick; 3.2mm) CONCRETE/STONE SIZE

4/ x / x / 41/2 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 9 x 1/8 x 7/8 9 x 1/8 x 5/8-11 1 2

1 8

7 8

RPM

CARTON QTY.

FAST CUT C24R

13,300 13,300 8,600 8,600 6,600 6,600

25 10 25 10 25 10

35618 35619 35636 35637 35650 35651 Type 1

Wheel specifically designed for cutting tiles, ceramics and marble. CONCRETE/STONE SIZE

4/ x / x / 6 x 1/16 x 7/8 1 2

1 16

7 8

RPM

CARTON QTY.

C24R

13,300 10,200

25 25

45208 45209

Samples Available for Testing – Contact CGW for Details

83


HIGH-SPEED REINFORCED CUT-OFF WHEELS

DIE GRINDER CUT-OFF WHEELS High-Speed Reinforced Cut-Off Wheels – Type 1 A: Aluminum Oxide – Metal & Steel

Type 1

ALUMINUM OXIDE USA Made

Die Grinder

UPC#

SIZE

SPEC.

RPM

CARTON QTY

35687 35688 35689 45066 35690 35691 35500 35501 35502 35503 45085 45086 35504 35505 35506 35507 35508 35509 45087 45088 35510 35511 35512

11/2 x 1/32 x 1/4 11/2 x 1/16 x 1/4 2 x 1/32 x 3/8 2 x 1/16 x 1/4 2 x 1/16 x 3/8 2 x 1/8 x 3/8 3 x 1/32 x 1/4 3 x 1/32 x 3/8 3 x 1/16 x 1/4 3 x 1/16 x 3/8 3 x 1/16 x 1/4 3 x 1/16 x 3/8 3 x 1/8 x 1/4 3 x 1/8 x 3/8 4 x 1/32 x 1/4 4 x 1/32 x 3/8 4 x 1/16 x 1/4 4 x 1/16 x 3/8 4 x 1/16 x 3/8 4 x 1/16 x 1/4 4 x 1/16 x 5/8 4 x 1/8 x 1/4 4 x 1/8 x 3/8

A60-R-BF A60-R-BF A60-R-BF A60-R-BF A60-R-BF A24-R-BF A60-R-BF A60-R-BF A36-R-BF A36-R-BF A60-R-BF A60-R-BF A24-R-BF A24-R-BF A60-R-BF A60-R-BF A36-R-BF A36-R-BF A60-R-BF A60-R-BF A36-R-BF A24-R-BF A24-R-BF

45,000 45,000 30,000 30,000 30,000 30,000 23,900 23,900 23,900 23,900 23,900 23,900 23,900 23,900 22,000 22,000 22,000 22,000 22,000 22,000 22,000 22,000 22,000

50 50 50 50 50 50 50 50 50 50 50 50 25 25 50 50 50 50 50 50 50 25 25

Cut-Off Wheel Mandrel Adaptor

48227

48245

Cut-Off Wheel Mandrel Adaptor

84

UPC#

SIZE/SPEC.

CARTON QTY

48227 48245

1/4"-3/8" Mandrel Adaptor 3/8"-24 Mandrel Adaptor

1 1

Samples Available for Testing – Contact CGW for Details


ZA:

Zirconia Aluminum Oxide – Metal, steel and stainless. Longer lasting life and easy cutting action.

Type 1

ZIRCONIA AO Die Grinder

Zirconia – USA Made UPC#

SIZE

36175 36176 36173 36174 36179 36180 36177 36178

3 3 3 3 4 4 4 4

x x x x x x x x

/ / 1/16 1/16 1/32 1/32 1/16 1/16 1 32 1 32

x x x x x x x x

/ / 1/4 3/8 1/4 3/8 1/4 3/8 1 4 3 8

SPEC.

RPM

CARTON QTY

ZA60-T-BF ZA60-T-BF ZA36-T-BF ZA36-T-BF ZA60-T-BF ZA60-T-BF ZA36-T-BF ZA36-T-BF

23,900 23,900 23,900 23,900 19,100 19,100 19,100 19,100

50 50 50 50 50 50 50 50

HIGH-SPEED REINFORCED CUT-OFF WHEELS

Zirconia Premium Cut-Off Wheels – Type 1

Fast Cut Cut-Off Wheels – Type 1 A:

Aluminum Oxide Grain – Economical choice for metal, steel and general applications. Type 1

ALUMINUM OXIDE Die Grinder

Fast Cut UPC#

SIZE

SPEC.

RPM

CARTON QTY

59111 59112 59113 59102 59103 59104 59105 59114 59106 59107 59108 59115 59116

2 x 1/32 x 3/8 2 x 1/16 x 3/8 2 x 1/8 x 3/8 3 x 1/32 x 1/4 3 x 1/32 x 3/8 3 x 1/16 x 1/4 3 x 1/16 x 3/8 3 x 1/8 x 3/8 4 x 1/32 x 1/4 4 x 1/32 x 3/8 4 x 1/16 x 3/8 4 x 1/16 x 5/8 4 x 1/8 x 3/8

A60-R-BF A60-R-BF A24-R-BF A60-R-BF A60-R-BF A36-R-BF A36-R-BF A24-R-BF A60-R-BF A60-R-BF A36-R-BF A36-R-BF A24-R-BF

30,000 30,000 30,000 23,900 23,900 23,900 23,900 23,900 19,100 19,100 19,100 19,100 19,100

50 50 50 50 50 50 50 25 50 50 50 50 25

Samples Available for Testing – Contact CGW for Details

85


CIRCULAR & STATIONARY SAW WHEELS

CIRCULAR SAW WHEELS 7" Circular Saw Cut-Off Wheels – Type 1 Description and Applications ■ ■

A: Aluminum Oxide – Metal & Steel C: Silicon Carbide – Stone/Concrete .045 wheels extra thin for faster cutting with less resistance.

ALUMINUM OXIDE SILICON CARBIDE UPC#

SIZE

SPEC.

37573 7 x .045 x 5/8 A60-S-BF 5 37574 7 x .045 x /8 C30-R-BF 35573 7 x 3/32 x 5/8-X A24-R-BF 3 5 35574 7 x /32 x /8-X C24-R-BF Fast Cut ■ Economical choice for metal, steel and general applications.

Type 1 Circular Saw

RPM

CARTON QTY

8,600 8,600 8,600 8,600

25 25 25 25

UPC#

SIZE

SPEC.

RPM

CARTON QTY

59109 59110

7 x 3/32 x 5/8-X 7 x 3/32 x 5/8-X

A24-R-BF C24-R-BF

8,600 8,600

25 25

10"-20" Stationary Saw Cut-Off Wheels – Type 1

Type 1

ALUMINUM OXIDE Stationary Saw

Fast Cut Stationary Saw Wheels ■ Economical choice for metal, steel and general applications.

86

UPC#

SIZE

70111 70105 36233 70106 70107 70108 70109

10 x / x / 12 x 1/8 x 1 14 x 1/8 x 1 16 x 5/32 x 1 18 x 5/32 x 1 20 x 5/32 x 1 20 x 3/16 x 1 1 8

5 8

SPEC.

RPM

CARTON QTY

A24-R-BF A24-R-BF A24-Q-BF A24-R-BF A24-R-BF A24-R-BF A24-R-BF

6,110 5,100 4,400 3,820 3,400 3,100 3,100

10 10 10 10 10 10 10

Samples Available for Testing – Contact CGW for Details


STATIONARY SAW WHEELS 10"-20" Stationary Saw Cut-Off Wheels – Type 1 Description and Applications

STATIONARY SAW WHEELS

Stationary saw cut-off wheels cut structural steel, bar stock, tubing and non-ferrous metals. ■ A: Aluminum Oxide – Metal & Steel ■ C: Silicon Carbide – Stone/Concrete ■ WA: White Aluminum Oxide – Excellent on stainless steel, and ferrous metals ■ ZA: Zirconia Aluminum Oxide – Metal, Steel & Stainless Type 1 Stationary Saw

UPC#

SIZE

SPEC.

RPM

CARTON QTY

35577 35579 35580 *45071 *45072 35581 35582 37671 45089 35584 *37673 *35585 35851

10 x 1/16 x 5/8 10 x 1/8 x 5/8 10 x 1/8 x 1 12 x 1/16 x 1 12 x 1/16 x 11/4 12 x 1/8 x 1 14 x 1/8 x 1 14 x 1/8 x 1 14 x 1/8 x 1 16 x 5/32 x 1 16 x 5/32 x 1 18 x 5/32 x 1 20 x 7/32 x 1

A24-R-BF A24-R-BF A24-R-BF A46-T-BF A46-T-BF A24-R-BF A24-R-BF C24-R-BF WA24-S-BF A24-R-BF A24-T-BF A24-R-BF A30R-B-BF

6,110 6,110 6,110 5,100 5,100 5,100 4,400 4,400 4,400 3,820 3,820 3,400 3,100

10 10 10 10 10 10 10 10 10 10 10 10 10

*While supplies last. #35585 recommended substitute is #70107 (page 86)

Clay Pipe

Solid Bricks

Firing Bricks

Paving Bricks

Marble

Masonry

Slate

Roof – Tiles

Concrete

Asphalt / Green Concrete

Titanium

Brass, Bronze

Copper

Aluminum Alloys

Ductile Iron Pipe & Concrete

Gray Cast Iron

Cast Steel

Rail Cutting

Stainless Steel Bars

Stainless Steel Sheets

Wall Studs

Pipe Line

✔ ✔ • ✔ • •

Iron / Steel Bar

High Tensile Steel

A24R C24R ZA24R

Angle Iron – General

SPEC.

Metal Decking & Cable

Application Chart – Stationary Saw Cut-Off Wheels

• • ✔ ✔ • • ✔ ✔ ✔ • ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ FERROUS METALS CASTINGS NON-FERROUS MASONRY ✔ = Recommended METALS • = May Be Used

Samples Available for Testing – Contact CGW for Details

87


CHOP SAW WHEELS 12"-16" Chop Saw Wheels – Type 1

CHOP SAW CUT-OFF WHEELS

Description and Applications ■

A:

Aluminum Oxide – Metal & Steel. 14" available in single and double fiberglass reinforced. Fast Cut: Economical choice for metal, steel and general applications. ALU: Aluminum Oxide – Special non-loading formulation for cutting aluminum. WA: White Aluminum Oxide – Excellent on stainless steel, ferrous metals. ZA: Zirconia Aluminum Oxide – Metal & Stainless; High performance cutting, recommended on thicker stock applications such as angle iron, angle bars.

Type 1 Chop Saw

10-16" Double Reinforced – General Purpose UPC#

SIZE

SPEC.

RPM

CARTON QTY

35578 35575 35576 36133

10 x 3/32 x 5/8 12 x 3/32 x 1 14 x 3/32 x 1 16 x 3/32 x 1

A24-R-BF A36-P-BF A36-P-BF A36-P-BF

6,110 5,100 4,400 3,820

10 10 10 10

14" Single & Double Reinforced – General Purpose – Fast Cut UPC#

70110 70112 70113 36234

SIZE

10 x 12 x 14 x 14 x

/ x / x 3/32 x 7/64 x

3 32

3 32

/ 1 1 1

5 8

SPEC.

RPM

CARTON QTY

A24-R-BF A36-P-BF DR A30-P-BF SR A36-S-BF

6,110 5,100 4,400 4,400

10 10 10 10

14" Single Reinforced – General Purpose UPC#

SIZE

SPEC.

RPM

CARTON QTY

35670

14 x / x 1

A30-P-BF

4,400

10

3 32

14" Double Reinforced – Aluminum UPC#

SIZE

SPEC.

RPM

CARTON QTY

36122

14 x / x 1

A30-N-BF

4,400

10

3 32

5-Pack Merchandiser UPC#

SIZE

SPEC.

RPM

CARTON QTY

35686 35685

14 x 3/32 x 1 14 x 3/32 x 1

A30P SR A36P DR

4,400 4,400

10 10

*SR=Single or internal reinforced chop saw blade **DR=Double reinforced chop saw blade

88

Samples Available for Testing – Contact CGW for Details


14" CHOP SAW WHEELS – TYPE 1

14" Chop Saw Wheels – Type 1 Description and Applications ■ ■

A: Aluminum Oxide – Metal & Steel. WA: White Aluminum Oxide – Excellent on stainless steel, ferrous metals. ZA: Zirconia Aluminum Oxide – Metal & Stainless; High performance cutting, recommended on thicker stock applications such as angle iron, angle bars.

Type 1 Chop Saw

14" Double Reinforced – Angle Iron/Heavy Bars • Zirconia grain, excellent on all ferrous metal applications, especially thicker stock • Our #1 performing chop saw cut-off wheel. UPC#

SIZE

SPEC.

RPM

CARTON QTY

36125

14 x 3/32 x 1

ZA24-S-BF

4,400

10

14" Double Reinforced – MR Stud • Designed for drywall stud, aluminum shelving, thin metal UPC#

SIZE

SPEC.

RPM

CARTON QTY

36124

14 x 3/32 x 1

A30-R-BF

4,400

10

14" Single Reinforced – Stainless • Designed for stainless steel applications • Contamination Free, Fe+S+Cl)0.1% • No iron, sulfur or chlorine

CARTON QTY

14 x / x 1

WA36-P-BF

4,400

10

A36P / A302P* A30R-Mr Stud A30N-ALU WA36P ZA24S *A302 is single reinforced (SR). The SR blades have a lower G-ratio but higher cutting rate compared to the double reinforced. ✔ = Recommended

✔ ✔ • • • ✔ • • • ✔

Gray Cast Iron

Cast Steel

Rail Cutting

Stainless Steel Bars

Stainless Steel Sheets

High Tensile Steel

Wall Studs

Pipe Line

Metal Decking & Cable

SPEC.

Iron / Steel Bar

Angle Iron – General

Application Chart – Chop Saw Wheels

Brass, Bronze

RPM

Copper

SPEC.

3 32

Aluminum Alloys

SIZE

Ductile Iron Pipe & Concrete

UPC#

36123

Titanium

CONTAMINATE-FREE Iron, Sulfur, and Chlorine 0.1%

• • •

• ✔ • • • ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ • • • FERROUS METALS

CASTINGS NON-FERROUS METALS

• = May Be Used Samples Available for Testing – Contact CGW for Details

89


HIGH SPEED CUT-OFF WHEELS HIGH SPEED CUT-OFF WHEELS

12"-16" High Speed Cut-Off Wheels – Type 1 Description and Applications ■

■ ■

A24R: Aluminum Oxide – Metal & Steel, Stainless. General purpose. 14" are available in both double and triple reinforced. A24T: Aluminum Oxide – Metal Decking & Cable. Harder bond for more cuts on thinner metals. 14" are triple reinforced. AC: (Mix of A/C) – Used on Ductile Iron. 14" are available in both double and triple reinforced. C16: Silicon Carbide – Asphalt/Green Concrete C24: Silicon Carbide – Stone/Concrete

Type 1 Gas Saw

• • • • •

EB – Electronically Balanced. All 12-14" wheels are automatically balanced during

manufacturing. All 12-14" wheels are guaranteed to be less than 3 and 3.5 grams out of balance. CGW wheels are safer, cause less vibration and are more consistent. CGW uses heavy duty fiberglass reinforcement, so our 12-14" high speed wheels meet speed specifications for all machines on the market. Premium 14" A24R, A24T, AC & 16" wheels are triple reinforced (TR) to provide extra safety. 12 & 14" wheels can be used with both gas and electric high speed machines. 12 & 14" wheels sold in (2) 10 piece retail packs and are master packed (contains 20 pieces).

12-16" A24-R, Metal, Steel, Stainless General Purpose UPC#

SIZE

SPEC.

RPM

RETAIL PACK

MASTER PACK

35587 35589 36158 36159 35599 35600 36142 36143

12 x / x 20mm 12 x 5/32 x 1 14 x 5/32 x 20mm 14 x 5/32 x 1 14 x 5/32 x 20mm 14 x 5/32 x 1 16 x 5/32 x 20mm 16 x 5/32 x 1

A24-R-BF A24-R-BF A24-R-BF A24-R-BF A24-R-BF TR A24-R-BF TR A24-R-BF TR A24-R-BF TR

6,400 6,400 5,500 5,500 5,500 5,500 4,800 4,800

10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20

5 32

12-14" A24-T, Metal Decking & Cable, Thinner Metals UPC#

SIZE

SPEC.

RPM

RETAIL PACK

MASTER PACK

36114 36115 36113 36126

12 x 5/32 x 20mm 12 x 5/32 x 1 14 x 5/32 x 20mm 14 x 5/32 x 1

A24-T-BF A24-T-BF A24-T-BF TR A24-T-BF TR

6,400 6,400 5,500 5,500

10 10 10 10

20 20 20 20

TR=Triple Reinforced

90

Samples Available for Testing – Contact CGW for Details


12"-16" High Speed Cut-Off Wheels – Type 1 ■

■ ■

HIGH SPEED CUT-OFF WHEELS

Description and Applications

AC: (Mix of A/C) – Used on Ductile Iron. 14" are available in both double and triple reinforced. C16: Silicon Carbide – Asphalt/Green Concrete C24: Silicon Carbide – Stone/Concrete •

EB – Electronically Balanced. All

12-14" wheels are automatically balanced during manufacturing. All 12-14" wheels are guaranteed to be less than 3 and 3.5 grams out of balance. CGW wheels are safer, cause less vibration and are more consistent. Premium 14" A24R, A24T, AC & 16" wheels are triple reinforced (TR) to provide extra safety.

12-16" AC24-R, Ductile Iron

Type 1 Gas Saw

12-16" wheels for metal and masonry cutting applications.

UPC#

SIZE

SPEC.

RPM

RETAIL PACK

MASTER PACK

35590 35592 36160 36161 35601 35602 36144 36145

12 x 5/32 x 20mm 12 x 5/32 x 1 14 x 5/32 x 20mm 14 x 5/32 x 1 14 x 5/32 x 20mm 14 x 5/32 x 1 16 x 5/32 x 20mm 16 x 5/32 x 1

AC24-R-BF AC24-R-BF AC24-R-BF AC24-R-BF AC24-R-BF TR AC24-R-BF TR AC24-R-BF TR AC24-R-BF TR

6,400 6,400 5,500 5,500 5,500 5,500 4,800 4,800

10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20

12-16" C24-R, Stone/Concrete UPC#

SIZE

SPEC.

RPM

RETAIL PACK

MASTER PACK

35596 35598 35605 35606 36116 36117 36146 36147

12 x / x 20mm 12 x 5/32 x 1 14 x 5/32 x 20mm 14 x 5/32 x 1 14 x 5/32 x 20mm 14 x 5/32 x 1 16 x 5/32 x 20mm 16 x 5/32 x 1

C24-R-BF C24-R-BF C24-R-BF C24-R-BF C24-R-BF TR C24-R-BF TR C24-R-BF TR C24-R-BF TR

6,400 6,400 5,500 5,500 4,400 4,400 4,800 4,800

10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20

5 32

12-14" C16-U, Asphalt/Green Concrete UPC#

SIZE

SPEC.

RPM

RETAIL PACK

MASTER PACK

35593 35595 35603 35604

12 x 5/32 x 20mm 12 x 5/32 x 1 14 x 5/32 x 20mm 14 x 5/32 x 1

C16-U-BF C16-U-BF C16-U-BF C16-U-BF

6,400 6,400 5,500 5,500

10 10 10 10

20 20 20 20

Samples Available for Testing – Contact CGW for Details

91


HIGH SPEED CUT-OFF WHEELS

FAST CUT 12-14" Type 1 High Speed Cut-Off Wheels

Description and Applications ■

A24R: Aluminum oxide – Metal & Steel, Stainless. General purpose. 14" is triple reinforced. Economical choice for standard cutting applications. Type 1

ALUMINUM OXIDE Walk Behind Saw

12-16" FAST CUT Type 1 High Speed Cut-Off Wheels UPC#

SIZE

SPEC.

RPM

RETAIL PACK

CARTON QTY

70220 70221 70224 70225

12 x 5/32 x 20MM 12 x 5/32 x 1 14 x 5/32 x 20MM 14 x 5/32 x 1

A24-R-BF A24-R-BF A24-R-BF TR A24-R-BF TR

6,400 6,400 5,500 5,500

10 10 10 10

20 20 20 20

14-16" Rail Track Cutter

Description and Applications ■

Premium mix of zirconia and aluminum oxide to maximize number of cuts while cutting quickly and not burning the work piece.

ZIRCONIA

Type 1

14-16" Rail Track Cutter UPC#

SIZE

SPEC.

RPM

RETAIL PACK

CARTON QTY

36162 36163

14 x 1/8 x 7/8 16 x 1/8 x 7/8

ZA24-R-BF ZA24-R-BF

5,500 4,800

10 10

20 20

14" Walk Behind Saw Wheels with Pinhole Description and Applications ■ ■

C16: Silicon Carbide – Asphalt/Green Concrete C24: Silicon Carbide – Stone/Concrete

Type 1

SILICON CARBIDE Walk Behind Saw

14" wheels for Walk Behind Saws - Asphalt/concrete

14" Walk Behind Saw Wheels with Pinhole

92

UPC#

SIZE

SPEC.

RPM

RETAIL PACK

MASTER PACK

35608 37672

14 x 3/16 x 1 + PH 14 x 3/16 x 1 + PH

C16-U-BF C24-R-BF

5,500 5,500

10 10

20 20

Samples Available for Testing – Contact CGW for Details


T18 T16

18R TYPE 11

Cones & Plugs ■ A: Aluminum Oxide Grain; Used for grinding and finishing metals in hard to reach areas. Cones UPC#

Type 16:

49016 49017 49018 49019 36238 49021 49022 49023

SIZE

SPEC.

CARTON UNIT

11/2 x 21/2 x 3/8-24 11/2 x 21/2 x 5/8-11 11/2 x 3 x 3/8-24 11/2 x 3 x 5/8-11 2 x 3 x 5/8-11 2 x 3 x 5/8-11 23/4 x 31/2 x 5/8-11 3 x 3 x 5/8-11

A16R A16R A16R A16R A24R A16R A16R A16R

10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20

11/2 x 21/2 x 3/8-24 11/2 x 3 x 3/8-24 11/2 x 3 x 5/8-11 2 x 3 x 5/8-11 21/2 x 3 x 5/8-11

A16R A16R A16R A16R A16R

10 10 10 10 10

20 20 20 20 20

SIZE

SPEC.

11/2 x 21/2 x 3/8-24 11/2 x 21/2 x 5/8-11 11/2 x 3 x 3/8-24 11/2 x 3 x 5/8-11 2 x 3 x 5/8-11 2 x 3 x 5/8-11 2 x 31/2 x 5/8-11

A16R A16R A16R A16R A24R A16R A16R

10 10 10 10 10 10 10

20 20 20 20 20 20 20

A16R A16R A16R A16R A24R A16R A16R

10 10 10 10 10 10 10

20 20 20 20 20 20 20

Type 17:

49024 49026 49027 49028 49029 Plugs UPC#

Type 18:

49030 49031 49032 49033 36239 49035 49036

CARTON UNIT

Type 18R:

49037 49038 49039 49040 36240 49042 49043

11/2 x 21/2 x 3/8-24 11/2 x 21/2 x 5/8-11 11/2 x 3 x 3/8-24 11/2 x 3 x 5/8-11 2 x 3 x 5/8-11 2 x 3 x 5/8-11 3 x 3 x 5/8-11

Cups ■ A: Aluminum Oxide; For tough steel, ferrous metal applications ■ CA: Aluminum Oxide/Silicon Carbide Mix; Excellent for castings, cast iron, aluminum ■ C: Ideal for grinding and cleaning concrete, masonry and stone 4/3 x 2 x

/ -11

9,070 R.P.M.

5 8

UPC#

SIZE

CARTON

UNIT

A16-Q6-B C16-N-B CA16-N-B

1 1 1

10 10 10

1

10

No Steel Back:

49000 49002 49003

RESIN CONES & PLUGS, RESIN CUP WHEELS

Resin Cup Wheels, Cones & Plugs

With Steel Back:

49001 5/4 x 2 x

A16-Q6-B / -11

7,260 R.P.M.

5 8

UPC#

SIZE

CARTON

UNIT

A16-Q6-B A24-Q6-B C16-N-B CA16-N-B

1 1 1 1

10 10 10 10

No Steel Back:

49004 49005 49006 49007

6/4-3/4 x 2 x UPC#

/ -11

6,048 R.P.M.

5 8

SIZE

CARTON

UNIT

A16-Q6-B A16-Q6-B A24-Q6-B A24-Q6-B C16-N-B CA16-QB-B

5 1 5 1 1 1

10 10 10 10 10 10

1 1 1 1

10 10 10 10

No Steel Back:

35900 49008 49010 49011 35901 49014

With Steel Back:

49009 49012 49013 49015

A16-Q6-B A24-Q6-B C16-N-B CA16-Q6-B

*35900 and 49010 are packed 5 to a box. All other items are individually packed.

Samples Available for Testing – Contact CGW for Details

93


Carbide Burs

Description and Applications

USA MADE CARBIDE BURS

CGW carbide burs are made on premium CNC machines for precision, uniform burs. Single Cut: General purpose cut made for steel, cast iron and other ferrous materials. Single cut burs provide good material removal and work piece finishes. Double Cut: Designed to produce smaller chips for faster cutting action, minimal loading and improved operator control. For stainless steel and ferrous materials. Aluminum Cut: Wide flute design ensures quick, easy stock removal with minimal loading. For non-ferrous and other soft materials.

SA – Cylinder Shape • Application: Deburring • No cut on end SHAPE

SA-41 SA-42 SA-43 SA-51 SA-1 SA-3 SA-3NF SA-5 SA-5NF SA-6 SA-7 Long Shank SA-1L6 SA-3L6 SA-5L6

L1

head diameter length of cut shank diameter overall length

D2 L2

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

ORDER QTY.

SINGLE

DOUBLE

1/16" 3/32" 1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4"

1/4" 7/16" 9/16" 1/2" 5/8" 3/4" 3/4" 1" 1" 1" 1"

1/8" 1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

1-1/2" 1-1/2" 1-1/2" 2" 2" 2-1/2" 2-1/2" 2-3/4" 2-3/4" 2-3/4" 2-3/4"

1 1 1 1 1 1 1 1 1 1 1

62001 62005 62008 62018 62019 62023

62301 62305 62308 62318 62319 62323

62028

62328

62030 62033

62330 62333

1/4" 3/8" 1/2"

1/2" 3/4" 1"

1/4" 1/4" 1/4"

6-1/2" 6-3/4" 7"

1 1 1

62021 62025 62029

62321 62325 62329

1/4" 7/16" 3/16" 5/8" 3/4" 3/4" 1" 1"

62604 62608

1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4"

D2

D1 L2

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

1/16" 3/32" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2"

ALUMINUM

L1

SB – Cylinder Shape • Applications: Face & Peripheral Milling • With end cut

SB-41 SB-42 SB-51 SB-1 SB-3 SB-3NF SB-5 SB-5NF

= = = =

D1

Items with a UPC number are stocked items.

SHAPE

D1 L1 D2 L2

1-1/2" 1-1/2" 1-11/16" 2" 2-1/2" 2-1/2" 2-3/4" 2-3/4"

ORDER QTY.

SINGLE

DOUBLE

1 1 1 1 1 1 1 1

62036 62039 62049 62050 62053

62336 62339 62349 62350 62353

ALUMINUM

62613 62057

62357 62614

Items with a UPC number are stocked items.

94

Please see page 99 for Carbide Bur material recommendations.


L1

SC – Cylinder Shape • Applications: Surface Milling, Contouring • Ball nose/radius end SHAPE

SC-41 SC-42 SC-51 SC-1 SC-3 SC-3NF SC-5 SC-5NF SC-6 SC-7 Long Shank SC-1L6 SC-3L6 SC-5L6

= = = =

head diameter length of cut shank diameter overall length

D1

D2 L2

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

ORDER QTY.

SINGLE

DOUBLE

3/32" 1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4"

7/16" 9/16" 1/2" 5/8" 3/4" 3/4" 1" 1" 1" 1"

1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

1-1/2" 1-1/2" 2" 2" 2-1/2" 2-1/2" 2-3/4" 2-3/4" 2-3/4" 2-3/4"

1 1 1 1 1 1 1 1 1 1

62065 62066 62076 62077 62081

62365 62366 62376 62377 62381

62086

62386

62088 62091

62388 62391

1/4" 3/8" 1/2"

1/2" 3/4" 1"

1/4" 1/4" 1/4"

6-1/2" 6-3/4" 7"

1 1 1

62079 62083 62087

62379 62383 62387

ALUMINUM

62621 62625

USA MADE CARBIDE BURS

D1 L1 D2 L2

Items with a UPC number are stocked items.

L1 D1

D2

SD – Ball Shape • Applications: Deburring, Contouring, Build-up Welding Preparation SHAPE

SD-41 SD-42 SD-51 SD-1 SD-3 SD-3NF SD-5 SD-5NF SD-6 SD-7 Long Shank SD-3L6 SD-5L6

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

L2

ORDER QTY.

SINGLE

DOUBLE

62394 62395 62403 62404 62407

3/32" 1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4"

3/32" 1/8" 7/32" 7/32" 5/16" 5/16" 7/16" 7/16" 9/16" 11/16"

1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

1-1/2" 1-1/2" 1-11/16" 2" 2-5/64" 2-5/64" 2-13/64" 2-13/64" 2-5/16" 2-7/16"

1 1 1 1 1 1 1 1 1 1

62094 62095 62103 62104 62107

62112 62113

62412 62413

3/8" 1/2"

3/8" 1/2"

1/4" 1/4"

6-3/8" 6-1/2"

1 1

62108 62111

62408 62411

ALUMINUM

62630 62110

62410 62634

Items with a UPC number are stocked items.

Please see page 99 for Carbide Bur material recommendations.

95


USA MADE CARBIDE BURS

D1 L1 D2 L2

L1

= = = =

head diameter length of cut shank diameter overall length

D1

D2

SE – Oval/Egg Shape • Application: Contouring SHAPE

SE-41 SE-51 SE-1 SE-3 SE-3NF SE-5 SE-5NF SE-6 SE-7 Long Shank SE-1L6 SE-3L6 SE-5L6

L2

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

ORDER QTY.

SINGLE

DOUBLE

1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4"

7/32" 3/8" 3/8" 5/8" 5/8" 7/8" 7/8" 1" 1"

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

1-1/2" 1-7/8" 2" 2-3/8" 2-3/8" 2-5/8" 2-5/8" 2-3/4" 2-3/4"

1 1 1 1 1 1 1 1 1

62116 62122 62123 62125

62416 62422 62423 62425

62127

62427

62129 62130

62429 62430

1/4" 3/8" 1/2"

3/8" 5/8" 7/8"

1/4" 1/4" 1/4"

6-3/8" 6-5/8" 6-7/8"

1 1 1

62124 62126 62128

62424 62426 62428

Items with a UPC number are stocked items.

ALUMINUM

62642 62646

L1 D1

D2

SF – Rounded Tree Shape • Application: Contouring SHAPE

SF-41 SF-51 SF-1 SF-3 SF-3NF SF-5 SF-5NF SF-6 SF-7 SF-14 Long Shank SF-1L6 SF-3L6 SF-5L6

L2

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

ORDER QTY.

SINGLE

DOUBLE

1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4"

1/4" 1/2" 5/8" 3/4" 3/4" 1" 1" 1" 1" 1-1/4"

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

1-1/2" 2" 2" 2-1/2" 2-1/2" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 3"

1 1 1 1 1 1 1 1 1 1

62132 62139 62140 62142

62432 62439 62440 62442

62148 62149 62150

62448 62449 62450

1/4" 3/8" 1/2"

1/2" 3/4" 1"

1/4" 1/4" 1/4"

6-1/2" 6-3/4" 7"

1 1 1

62141 62143 62147

62441 62443 62447

ALUMINUM

62654 62146

62446 62658

Items with a UPC number are stocked items.

96

Please see page 99 for Carbide Bur material recommendations.


L1

= = = = =

head diameter length of cut shank diameter overall length angle

D1

D2

SG – Pointed Tree Shape • Applications: Sharp angled areas, narrow contours SHAPE

SG-41 SG-42 SG-51 SG-1 SG-3 SG-5 Long Shank SG-1L6 SG-3L6 SG-5L6

L2

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

ORDER QTY.

SINGLE

DOUBLE

1/8" 1/8" 1/4" 1/4" 3/8" 1/2"

1/4" 5/16" 1/2" 5/8" 3/4" 1"

1/8" 1/8" 1/8" 1/4" 1/4" 1/4"

1-1/2" 1-1/2" 2" 2" 2-1/2" 2-3/4"

1 1 1 1 1 1

62153 62154 62161 62162 62165 62168

62453 62454 62461 62462 62465 62468

1/4" 3/8" 1/2"

1/2" 3/4" 1"

1/4" 1/4" 1/4"

6-1/2" 6-3/4" 7"

1 1 1

62163 62166 62169

62463 62466 62469

Items with a UPC number are stocked items.

ALUMINUM

L1 D2

D1 SH – Flame Shape • Application: Contouring SHAPE

SH-41 SH-1 SH-2 SH-5 Long Shank SH-2L6 SH-5L6

L2

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

ORDER QTY.

SINGLE

DOUBLE

1/8" 1/4" 5/16" 1/2"

1/4" 5/8" 3/4" 1-1/4"

1/8" 1/4" 1/4" 1/4"

1-1/2" 2" 2-1/2" 3"

1 1 1 1

62173 62177 62178 62180

62473 62477 62478 62480

5/16" 1/2"

3/4" 1-1/4"

1/4" 1/4"

6-3/4" 7-1/4"

1 1

62179 62181

62479 62481

Items with a UPC number are stocked items.

ALUMINUM

L1 D2

D1 SJ – 60° Cone Shape • Applications: Sharp angled areas, countersinking SHAPE

SJ-3 SJ-5

L2

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

3/8" 1/2"

5/16" 7/16"

USA MADE CARBIDE BURS

D1 L1 D2 L2 V

1/4" 1/4"

2-3/16" 2-19/64"

ORDER QTY.

SINGLE

DOUBLE

1 1

62186 62187

62486 62487

ALUMINUM

Items with a UPC number are stocked items.

Please see page 99 for Carbide Bur material recommendations.

97


USA MADE CARBIDE BURS

D1 L1 D2 L2 V

L1 D1

SK-3 SK-5

D2 L2

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

3/8" 1/2"

3/16" 1/4"

1/4" 1/4"

head diameter length of cut shank diameter overall length angle

V

SK – 90° Cone Shape • Applications: Sharp angled areas, countersinking SHAPE

= = = = =

ORDER QTY.

SINGLE

DOUBLE

1 1

62193 62194

62493 62494

2-1/16" 2-1/8"

Items with a UPC number are stocked items.

ALUMINUM

L1 D1

D2 L2

SL – Taper Shape Radius • Applications: Narrow contours, surface machining SHAPE

SL-41 SL-42 SL-4 SL-1 SL-3 SL-4NF SL-5 SL-5NF Long Shank SL-1L6 SL-3L6 SL-4L6

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

ORDER QTY.

SINGLE

DOUBLE

62498 62499 62502 62505 62508

1/8" 1/8" 1/2" 1/4" 3/8" 1/2" 5/8" 5/8"

3/8" 1/2" 1-1/8" 5/8" 1-1/16" 1-1/8" 1-3/16" 1-3/16"

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

1-1/2" 1-1/2" 3" 2" 2-5/16" 3" 3-1/16" 3-1/16"

1 1 1 1 1 1 1 1

62198 62199 62202 62205

1/4" 3/8" 1/2"

5/8" 1-1/16" 1-1/8"

1/4" 1/4" 1/4"

6-5/8" 7-1/16" 7-1/8"

1 1 1

62206 62209 62210

ALUMINUM

62668 62211

62511 62669 62506 62509 62510

Items with a UPC number are stocked items.

L1

SM – Pointed Cone Shape • Application: Narrow contours, surface machining • Pointed end SHAPE

SM-1 SM-3 SM-5

L2

HEAD DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH

1/4" 1/4" 1/2"

1/2" 1" 7/8"

1/4" 1/4" 1/4"

D2

D1

2" 2" 2-3/4"

ORDER QTY.

SINGLE

DOUBLE

1 1 1

62222 62224 62226

62522 62524 62526

ALUMINUM

Items with a UPC number are stocked items.

98

Please see page 99 for Carbide Bur material recommendations.


Carbide burrs or rotary files are made in a variety of shapes and types, and are used for deburring, drilling, milling, and finishing numerous shapes and materials, including aluminium, copper, plastic, stainless steel, iron, castings, and titanium. For use on hand-held pneumatic and electric die grinders.

Die Grinder

BURR TYPE

ALU

APPLICATION

D

S

Aluminium Copper Fibreglass Cast iron Plastic Hard rubber Iron alloys Stainless steel Nickel Titanium Zinc alloys Magnesium

S D ALU

USA MADE CARBIDE BURS

Matching burr type to application

Standard tooth formation for general-purpose deburring Diamond tooth for use on hard metals. Produces high surface quality, very small metal shavings and no blockage (double tooth) Aluminium tooth for processing non-metals and soft materials. Quick, easy stock removal.

Recommended operating speeds, by application 0.3 mm / 1/8"

0.6 mm / 1/4"

0.10 mm / 3/8"

0.12 mm / 1/2"

0.16 mm / 5/8"

Steel

60,000 - 90,000

45,000 - 60,000

30,000 - 40,000

22,500 - 30,000

18,000 - 24,000

Hardened steel

60,000 - 90,000

30,000 - 45,000

19,000 - 30,000

15,000 - 22,500

12,000 - 18,000

Stainless steel

60,000 - 90,000

30,000 - 45,000

19,000 - 30,000

15,000 - 22,500

12,000 - 18,000

Grey castings

45,000 - 90,000

22,500 - 60,000

15,000 - 40-000

11,000 - 30,000

9,000 - 24,000

Titanium

60,000 - 90,000

30,000 - 45,000

19,000 - 30,000

15,000 - 22,500

12,000 - 18,000

Nickel

60,000 - 90,000

30,000 - 45,000

19,000 - 30,000

15,000 - 22,500

12,000 - 18,000

Copper

45,000 - 90,000

22,500 - 60,000

15,000 - 40-000

11,000 - 30,000

9,000 - 24,000

Aluminium

30,000 - 90,000

15,000 - 70,000

10,000 - 50,000

7,000 - 38,000

6,000 - 30,000

Plastic

30,000 - 90,000

15,000 - 70,000

10,000 - 50,000

7,000 - 38,000

6,000 - 30,000

Samples Available for Testing – Contact CGW for Details

99


Knot Wire Wheel Brushes

Description and Applications

USA MADE WIRE BRUSHES

Versatile in design, wire wheels brushes can be used horizontally or vertically. (Correctly aligning brushes to work pieces allows wire tips to do the work.) Knot Wire Wheel Brush - Standard • Standard wire twist knot design for aggressive, yet uniform brushing action. • For surface preparation, weld cleaning, heavy duty applications • For general cleaning, weld cleaning, removal of rubber flash, scale, rust, and pipeline cleaning Knot Wire Wheel Brush - Stringer Bead • Tightly twisted wire knots easily reach into narrow or recessed areas for quick material removal. • For pipeline welding junctions, cleaning bead welds

Knot Wire Wheel Brush UPC#

SPEC

WIRE SIZE

Knot Wire Wheel Brush - Standard Twist 60050 4" Radial Knot Carbon .014 60001 4" Radial Knot Carbon .014 60006 4" Radial Knot Stainless .014 60011 4" Radial Knot Stainless .020 60012 4" Radial Knot Carbon .020 60013 5" Radial Knot Carbon .020 60014 5" Radial Knot Stainless .020 Knot Wire Wheel Brush - Standard Twist 60051 6" Radial Knot Carbon .025 60052 6" Radial Knot Carbon .020 60053 6" Radial Knot Carbon .025 60055 6" Radial Knot Stainless .016 High Speed Small Grinder Stringer Bead Wheel Brush 60020 4" Radial Knot Carbon .020 60025 4" Radial Knot Stainless .020 Knot Wire Wheel Brush - Stringer Bead 60035 5" Radial Knot Carbon .020 60037 5" Radial Knot Stainless .020 60038 5-7/8" Stringer Bead Carbon .020 60039 5-7/8" Stringer Bead Stainless .020 60040 6-1/2" Stringer Bead Carbon .020 60041 6-1/2" Stringer Bead Stainless .020

100

THREADED ARBOR HOLE

MAX RPM

BOX QTY

MASTER PACK QTY

1/2-5/8 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

20,000 20,000 20,000 20,000 20,000 12,000 12,000

6 6 6 6 6 6 6

24 24 24 24 24 24 24

5/8-1/2 5/8-11 5/8-11 5/8-1/2

9,000 9,000 9,000 9,000

6 6 6 6

24 24 24 24

5/8-11 5/8-11

20,000 20,000

6 6

24 24

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

12,000 12,000 12,000 12,000 12,000 12,000

6 6 6 6 6 6

24 24 24 24 24 24

Samples Available for Testing – Contact CGW for Details


Wire Cup Brushes

Description and Applications ■

USA MADE WIRE BRUSHES

Designed for fast, heavy-duty working on large surfaces. High Speed Small Grinder - Knot Wire Cup Brush • Wire twist knot for high productivity and long life • For scale removal, deburring, weld cleaning and flat surfaces High Speed Small Grinder - Knot Wire Cup Brush (Heavy Duty) • Wire treated for extra heavy duty applications • For general cleaning and cleaning of corners and flat or curved work pieces Knot Wire Cup Brush • Knot wire cup brushes are designed for rigorous work pieces • For metal surface preparation, cleaning, removal of weld scale and rust High Speed Small Grinder - Crimped Wire Cup Brush • For light and medium duty cleaning • Removing scale, deburring, cleaning welds or flat surfaces, heavy duty application burr removal

Cup Brush UPC#

SPEC

WIRE SIZE

High Speed Small Grinder Knot Wire Cup Brush 60060 2-3/4" Cup Knot Carbon .014 60065 2-3/4" Cup Knot Stainless .014 60070 2-3/4" Cup Knot Carbon .020 60076 2-3/4" Cup Knot Stainless .020 Knot Wire Cup Brush - Heavy Duty 60090 3-1/2" Cup Brush Carbon .020 60091 3-1/2" Cup Brush Stainless .020 60104 4" Cup Brush Carbon 1 Row .020 60105 4" Cup Brush Stainless 1 Row .020 60106 6" Cup Brush Carbon 1 Row .020 60101 6" Cup Brush Stainless 1 Row .020 60100 6" Cup Brush Carbon 1 Row .035 60102 6" Cup Brush Carbon 2 Row .020 60103 6" Cup Brush Carbon 2 Row .035 High Speed Small Grinder Crimped Wire Cup Brush 60120 2-3/4" Cup Crimp Carbon .014 60125 2-3/4" Cup Crimp Stainless .014 60126 3-1/2" Cup Crimp Carbon .014 60127 3-1/2" Cup Crimp Stainless .014 Crimped Wire Cup Brush 60110 4" Cup Brush Crimp Carbon .020 60111 5" Cup Brush Crimp Carbon .020 60113 5" Cup Brush Crimp Stainless .020 60112 6" Cup Brush Crimp Carbon .020

THREADED ARBOR HOLE

MAX RPM

BOX QTY

MASTER PACK QTY

5/8-11 5/8-11 5/8-11 5/8-11

14,000 14,000 14,000 14,000

6 6 6 6

24 24 24 48

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

12,500 12,500 6,600 6,600 6,600 6,600 6,600 6,600 6,600

1 1 1 1 1 1 1 1 1

24 24 24 24 24 24 24 24 24

5/8-11 5/8-11 5/8-11 5/8-11

14,000 14,000 12,500 12,500

6 6 1 1

24 24 24 24

5/8-11 5/8-11 5/8-11 5/8-11

9,000 8,000 8,000 6,600

1 1 1 1

24 24 24 24

Samples Available for Testing – Contact CGW for Details

101


End Brushes

Description and Applications

USA MADE WIRE BRUSHES

102

Designed for tight work spaces and higher brushing speeds (up to 22,000 RPM) Knot Wire End Brush • For pipeline cleaning, CNC equipment maintenance/ cleaning, removal of rust or scale Crimped Wire End Brush • For general use including blending, cleaning, and polishing

End Brush UPC#

SPEC

Knot Wire End Brush 60130 3/4" Knotted End Brush Carbon 60131 1" Knotted End Brush Carbon 60132 1" Knotted End Brush Stainless Crimped Wire End Brush 60140 3/4" Crimped End Brush Carbon 60141 1" Crimped End Brush Carbon

WIRE SIZE

SHANK

MAX RPM

BOX QTY

MASTER PACK QTY

.014 .020 .020

1/4" 1/4" 1/4"

22,000 22,000 22,000

12 12 12

144 144 144

.0104 .020

1/4" 1/4"

22,000 22,000

12 12

144 144

Samples Available for Testing – Contact CGW for Details


Crimped Wire Wheel Brushes

Description and Applications

Versatile in design, wire wheels brushes can be used hozitonally or vertically. (Correctly aligning brushes to work pieces allows wire tips to do the work.) Crimped Concave Wire Wheel Brush With Shank • Uniform brush design for use on drill presses or offhand for internal and external cleaning and deburring • For removal of rust, scale paint and weld splatter Crimped Wire Wheel Brush With Shank • Uniform brush design for use on drill presses or offhand for internal and external cleaning and deburring • For removal of rust, scale paint and weld splatter Crimped Wire Narrow Face Wheel Brush • Flexible design can easily be paired to work on wide surfaces. • For deburring narrow work pieces and paint and rust removal Crimped Wire Medium Face Wheel Brush • For edge blending, deburring, rust removal, surface finishing Crimped Wire Wide Face Wheel Brush • For deburring, rust removal, surface finishing Crimped Wire Wheel Brush • Light duty brushing

60150 Shown

USA MADE WIRE BRUSHES

Crimped Wire Wheel Brush UPC#

SPEC

WIRE SIZE

Crimped Concave Wire Wheel Brush With Shank 60160 1-1/2" Radial Concave Carbon .012 60161 2-1/2" Radial Concave Carbon .014 60162 3" Radial Concave Carbon .014 Crimped Wire Wheel Brush With Shank 60170 2" Crimped Carbon .014 60171 3" Crimped Carbon .014 60172 3" Crimped Stainless .014 High Speed Small Grinder Crimped Wire Wheel Brush 60150 4" Radial Carbon .014 Crimped Wire Narrow Face Wheel Brush 60180 8" Radial Narrow Carbon .014 60181 6" Radial Narrow Carbon .008 60182 6" Radial Narrow Carbon .014 Crimped Wire Medium Face Wheel Brush 60190 6" Radial Medium Carbon .014 Crimped Wire Wide Face Wheel Brush 60195 7" Radial Wide Carbon .014 60196 10" Radial Wide Carbon .014

MASTER PACK QTY

ARBOR OR SHANK

MAX RPM

BOX QTY

1/4" Shank 1/4" Shank 1/4" Shank

20,000 20,000 20,000

10 10 10

1/4" Shank 1/4" Shank 1/4" Shank

25,000 25,000 25,000

10 10 10

5/8-11

15,000

6

24

5/8 1/2-5/8 1/2-5/8

4,500 6,000 6,000

1 1 1

12 36 36

1/2-5/8

6,000

1

36

5/8 5/8

6,000 3,600

1 1

12 6

Samples Available for Testing – Contact CGW for Details

103


Miscellaneous Brushes

Description and Applications

USA MADE WIRE BRUSHES

Metal Chip Brush • For hot metal removal Cement Cleaning Brush • Features longer wire for easy removal of joint material from concrete and asphalt

Miscellaneous Brushes UPC#

DESCRIPTION

BOX QTY

Metal Chip Brush 60200 Metal Chip Brush Cement Cleaning Brush 60000 12" Radial Cement Crack Cleaning Brush .035 Knot Carbon 1" w 7/16" Drive Pin Hole

MASTER PACK QTY

12 1

4

Scratch Brushes

Description and Applications ■

Designed with kiln-dried hardwood handles for maximum tuft retention and high-quality, staple set wire for long life.

Scratch Brush UPC#

SPEC

DESCRIPTION

Economy Curved Handle Scratch Brush - w/hang up hole 60201 3 x 19 Rows Scratch Brush 60202 3 x 19 Rows Stainless Scratch Brush 60203 4 x 19 Rows Scratch Brush 60204 3 x 19 Rows Scratch Brush With Scraper Economy Show Handle Scratch Brush 60205 4 x 16 Rows Scratch Brush 60206 4 x 16 Rows Scratch Brush With Scraper 60207 4 x 16 Rows Stainless Scratch Brush Economy Small Cleaning Scratch Brush 60208 3 x 7 Rows Brass Scratch Brush Plastic Handle 60209 3 x 7 Rows Stainless Scratch Brush Plastic Handle Small Cleaning Scratch Brush 60210 3 x 7 Rows Brass Scratch Brush 60211 3 x 7 Rows SS Scratch Brush V-Trim Small Cleaning Scratch Brush 60212 V-Groove Scratch Brush Stainless 60213 V-Groove Scratch Brush Carbon

104

BOX QTY

MASTER PACK QTY

12 12 12 12

144 144 144 144

12 12 12

72 72 72

36 36

648 648

36 36

648 648

36 36

648 648

Samples Available for Testing – Contact CGW for Details


Adapters

Description and Applications ■

Metal Adapters for Brushes with 2” Arbor Hole

USA MADE CARBIDE BURS

Adapters UPC#

SPEC

DESCRIPTION

Metal Adapters for Brushes with 2" Arbor Hole 60220 Metal Adapters 2" x 1/2" 60221 Metal Adapters 2" x 5/8" 60222 Metal Adapters 2" x 3/4" 60223 Metal Adapters 2" x 1" 60224 Metal Adapters 2" x 1-1/4"

1 1 1 1 1

Pair Pair Pair Pair Pair

Chip / Paint Brushes

Paint Brushes UPC#

SPEC

BOX QTY

MASTER PACK QTY

60225 60226 60227 60228 60229 60230

1/2" Pure Bristle Wood Handle Chip Paint Brush 1" Pure Bristle Wood Handle Chip Paint Brush 1-1/2" Pure Bristle Wood Handle Chip Paint Brush 2" Pure Bristle Wood Handle Chip Paint Brush 3" Pure Bristle Wood Handle Chip Paint Brush 4" Pure Bristle Wood Handle Chip Paint Brush

36 36 36 24 24 12

72 72 72 72 72 48

Samples Available for Testing – Contact CGW for Details

105


Knot Wire Wheel Brushes Fast Cut

ECONOMY WIRE BRUSHES

Description and Applications ■

Versatile in design, wire wheels brushes can be used horizontally or vertically. (Correctly aligning brushes to work pieces allows wire tips to do the work.) Knot Wire Wheel Brush - Standard • Standard wire twist knot design for aggressive, yet uniform brushing action. • For surface preparation, weld cleaning, heavy duty applications • For general cleaning, weld cleaning, removal of rubber flash, scale, rust, and pipeline cleaning Knot Wire Wheel Brush - Stringer Bead • Tightly twisted wire knots easily reach into narrow or recessed areas for quick material removal. • For pipeline welding junctions, cleaning bead welds

Knot Wire Wheel Brush - Fast Cut UPC#

SPEC

Knot Wire Wheel Brush - Standard Twist 60500 3" Radial Knot Carbon 60501 3" Radial Knot Stainless 60502 4" Radial Knot Carbon 60503 5" Radial Knot Carbon 60505 6" Radial Knot Carbon Knot Wire Wheel Brush - Cable Twist 60514 4" Cable Twist Carbon 60515 4" Cable Twist Stainless Knot Wire Wheel Brush - Stringer Bead 60520 4" Stringer Bead Carbon 60521 4" Stringer Bead Stainless 60522 5" Stringer Bead Carbon 60523 6" Stringer Bead Carbon 60524 6" Stringer Bead Stainless 60525 6-1/2" Stringer Bead Carbon 60526 6-1/2" Stringer Bead Stainless

106

WIRE SIZE

ARBOR HOLE

MAX RPM

BOX QTY

MASTER PACK QTY

.014 .014 .014 .020 .020

1/2-3/8 1/2-3/8 5/8-11 5/8-11 5/8-11

20,000 20,000 20,000 12,000 9,000

5 5 5 5 5

100 100 100 100 25

.020 .020

5/8-11 5/8-11

20,000 20,000

5 5

50 50

.020 .020 .020 .020 .020 .020 .020

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

20,000 20,000 12,000 12,000 12,000 12,000 12,000

5 5 5 5 5 5 5

50 50 40 25 25 25 25

Samples Available for Testing – Contact CGW for Details


Wire Cup Brushes - Fast Cut

Description and Applications ■

ECONOMY WIRE BRUSHES

Designed for fast, heavy-duty working on large surfaces. High Speed Small Grinder - Knot Wire Cup Brush • Wire twist knot for high productivity and long life • For scale removal, deburring, weld cleaning and flat surfaces High Speed Small Grinder - Knot Wire Cup Brush (Heavy Duty) • Wire treated for extra heavy duty applications • For general cleaning and cleaning of corners and flat or curved work pieces Knot Wire Cup Brush • Knot wire cup brushes are designed for rigorous work pieces • For metal surface preparation, cleaning, removal of weld scale and rust High Speed Small Grinder - Crimped Wire Cup Brush • For light and medium duty cleaning • Removing scale, deburring, cleaning welds or flat surfaces, heavy duty application burr removal

Cup Brush - Fast Cut UPC#

SPEC

Knot Wire Cup Brush 60535 2-3/4" Cup Knot Carbon 60536 2-3/4" Cup Knot Stainless 60537 2-3/4" Cup Knot Carbon 60538 2-3/4" Cup Knot Stainless 60539 4" Cup Knot Carbon 1 Row 60540 4" Cup Knot Stainless 1 Row 60541 6" Cup Knot Carbon 1 Row 60542 6" Cup Knot Stainless 1 Row Crimped Wire Cup Brush 60560 3" Cup Brush Crimp Carbon 60561 3" Cup Brush Crimp Stainless 60562 4" Cup Brush Crimp Carbon 60563 4" Cup Brush Crimp Stainless 60564 6" Cup Brush Crimp Carbon 60565 6" Cup Brush Crimp Stainless

WIRE SIZE

ARBOR HOLE

MAX RPM

BOX QTY

MASTER PACK QTY

.014 .014 .020 .020 .020 .020 .020 .020

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

12,500 12,500 12,500 12,500 8,500 8,500 6,500 6,500

5 5 5 5 5 5 5 5

50 50 50 50 30 30 20 20

.014 .014 .014 .014 .020 .020

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

12,500 12,500 8,500 8,500 6,500 6,500

5 5 5 5 5 5

50 50 30 30 20 20

Samples Available for Testing – Contact CGW for Details

107


End Brushes - Fast Cut

Description and Applications

ECONOMY WIRE BRUSHES

108

Designed for tight work spaces and higher brushing speeds (up to 25,000 RPM) Knot Wire End Brush • For pipeline cleaning, CNC equipment maintenance/ cleaning, removal of rust or scale Crimped Wire End Brush • For general use including blending, cleaning, and polishing

End Brush - Fast Cut UPC#

SPEC

Knot Wire End Brush 60575 3/4" Knotted End Brush Carbon 60576 3/4" Knotted End Brush Carbon 60577 3/4" Knotted End Brush Stainless 60578 1" Knotted End Brush Carbon 60579 1" Knotted End Brush Stainless 60580 1" Knotted End Brush Carbon Crimped Wire End Brush 60590 3/4" Crimped End Brush Carbon 60591 3/4" Crimped End Brush Stainless 60592 1" Crimped End Brush Carbon 60593 1" Crimped End Brush Stainless

WIRE SIZE

SHANK

MAX RPM

BOX QTY

MASTER PACK QTY

.014 .020 .014 .014 .014 .020

1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

20,000 20,000 20,000 20,000 20,000 20,000

5 5 5 5 5 5

200 200 200 200 200 200

.014 .014 .014 .010

1/4" 1/4" 1/4" 1/4"

20,000 20,000 20,000 20,000

5 5 5 5

200 200 200 200

Samples Available for Testing – Contact CGW for Details


Crimped Wire Wheel Brushes Fast Cut

Description and Applications

Versatile in design, wire wheels brushes can be used hozitonally or vertically. (Correctly aligning brushes to work pieces allows wire tips to do the work.) Crimped Wire Wheel Brush • Light duty brushing • For deburring in narrow work spaces, removal of rust, scale, paint and dirt. Crimped Wire Medium Face Wheel Brush • For edge blending, deburring, rust removal, surface finishing

Crimped Wire Wheel Brush - Fast Cut UPC#

SPEC

WIRE SIZE

Crimped High Speed Small Grinder Crimped Wire Wheel Brush 60650 4" Radial Carbon .014 60651 4" Radial Stainless .014 Crimped Wire Medium Face Wheel Brush 60665 6" Radial Medium Carbon .014

ARBOR HOLE

MAX RPM

BOX QTY

MASTER PACK QTY

5/8-11 5/8-11

15,000 15,000

5 5

50 50

2

6,000

5

25

Samples Available for Testing – Contact CGW for Details

ECONOMY WIRE BRUSHES

109


BENCH & PEDESTAL WHEELS

BENCH & PEDESTAL WHEELS

Bench & Pedestal Wheels 6"-10" Diameter – Type 1 Carton Packs Description and Applications ■

■ ■

Straight vitrified wheels used for off-hand tool sharpening and grinding. Common settings for bench and pedestal grinders are in maintenance departments, tool & die shops and metal fabrication shops. A - Aluminum Oxide for general purpose off-hand work. GC - Green Silicon Carbide for non-ferrous metals, tungsten carbide for sharpening carbide tools in tool rooms. Type 1

H*: 1" Hole, Installed Telescopic Bushings for 3/4", 5/8", and 1/2" Arbors H : 1-1/4" Hole, Installed Telescopic Bushings for 1", 3/4", 5/8" and 1/2" Arbors 4

6 x 1/2 x 1 (H*) UPC#

4,456 R.P.M. SIZE

CARTON

UNIT

GC60-I-V GC80-I-V GC100-I-V

6 x 3/4 x 1 (H*) UPC#

10 10 10

20 20 20 4,456 R.P.M.

SIZE

CARTON

UNIT

Brown Aluminum Oxide:

35008 35009 35010 35011 35012

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V GC60-I-V GC80-I-V GC100-I-V

6 x 1 x 1 (H*) UPC#

10 10 10 10 10

20 20 20 20 20

10 10 10

20 20 20

CARTON

UNIT

Brown Aluminum Oxide:

35017 35018 35019 35020 35021

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V GC60-I-V GC80-I-V GC100-I-V

UNIT

35031 35032 35033

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

7 x 1 x 1 (H*)

3,760 R.P.M.

UPC#

SIZE

CARTON

UNIT

35034 35035 35036 35037 35038

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

10 10 10 10 10

20 20 20 20 20

35039 35040 35041

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

8 x 3/4 x 1 (H4) UPC#

3,600 R.P.M. SIZE

CARTON

UNIT

10

20

Brown Aluminum Oxide:

10 10 10 10 10

20 20 20 20 20

10 10 10

20 20 20

Green Silicon Carbide:

35022 35023 35024

CARTON

Green Silicon Carbide:

4,456 R.P.M. SIZE

3,760 R.P.M. SIZE

Brown Aluminum Oxide:

Green Silicon Carbide:

35013 35014 35015

UPC#

Green Silicon Carbide:

Green Silicon Carbide:

35005 35006 35007

7 x 3/4 x 1 (H*)

35044

A46-M-V

8 x 1 x 11/4 (H4) UPC#

3,600 R.P.M. SIZE

CARTON

UNIT

10 10 10 10 10

20 20 20 20 20

10 10 10

20 20 20

Brown Aluminum Oxide:

35046 35047 35048 35049 35050

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

Green Silicon Carbide:

35051 35052 35053 110

GC60-I-V GC80-I-V GC100-I-V

Samples Available for Testing – Contact CGW for Details


Bench & Pedestal Wheels Description and Applications ■ ■

A - Aluminum Oxide for general purpose off-hand work. GC - Green Silicon Carbide for non-ferrous metals, tungsten carbide for sharpening carbide tools in tool rooms. AZ - Premium Blue Aluminum Oxide for HSS over 55 RC and above, high carbon tool steels and woodworking applications. Engineered for free cutting action while pulling heat away from the part and into the matrix of the wheel. WA - White Aluminum Oxide highly friable grain for fast and cool cutting. Light grinding of all types of steel including tool and die steels; fast sharpening of all tools.

Type 1

H*: 1" Hole, Installed Telescopic Bushings for 3/4", 5/8", and 1/2" Arbors 6 x 1/2 x 1 (H*) UPC#

4,456 R.P.M. SIZE

Brown Aluminum Oxide:

38003 38004 38005

A46-M-V A60-M-V A80-M-V

CARTON

UNIT

1 1 1

10 10 10

1 1 1

10 10 10

Green Silicon Carbide:

38501 38502 38503

GC60-I-V GC80-I-V GC100-I-V

6 x 3/4 x 1 (H*) UPC#

4,456 R.P.M. SIZE

Brown Aluminum Oxide:

38006 38007 38008 38009 38010

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

CARTON

UNIT

1 1 1 1 1

10 10 10 10 10

Premium Blue Aluminum Oxide:

38111 38113 38114 38116

AZ36-K8-V3 AZ60-K8-V3 AZ80-K8-V3 AZ120-K8-V3

1 1 1 1

10 10 10 10

WA60-K-V WA120-K-V

1 1

10 10

1 1 1

10 10 10

Green Silicon Carbide:

38504 38505 38506

GC60-I-V GC80-I-V GC100-I-V

4,456 R.P.M.

UPC#

SIZE

Brown Aluminum Oxide:

38011 38012 38013 38014 38015

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

CARTON

UNIT

1 1 1 1 1

10 10 10 10 10

Premium Blue Aluminum Oxide:

38121 38123 38126

AZ36-K8-V32A AZ60-K8-V32A AZ120-K8-V32A

1 1 1

10 10 10

1 1

10 10

1 1 1 1

10 10 10 10

White Aluminum Oxide:

38623 38626

WA60-K-V WA120-K-V

Green Silicon Carbide:

38507 38508 38509 38580

GC60-I-V GC80-I-V GC100-I-V GC120-I-V

7 x 3/4 x 1 (H*) UPC#

3,760 R.P.M. SIZE

Brown Aluminum Oxide:

38562

White Aluminum Oxide:

38613 38616

6 x 1 x 1 (H*)

BENCH & PEDESTAL WHEELS

6"-18" Diameter – Type 1 Single Packs

A60-M-V

CARTON

UNIT

1

10

1 1 1

10 10 10

Green Silicon Carbide:

38510 38511 38512

GC60-I-V GC80-I-V GC100-I-V

Samples Available for Testing – Contact CGW for Details

111


H*: 1" Hole, Installed Telescopic Bushings for 3/4", 5/8", and 1/2" Arbors H : 1-1/4" Hole, Installed Telescopic Bushings for 1" and 3/4" Arbors H : 1-1/4" Hole, Installed Telescopic Bushings for 1", 3/4", 5/8" and 1/2" Arbors 2 4

7 x 1 x 1 (H*)

3,760 R.P.M.

BENCH & PEDESTAL WHEELS

UPC#

SIZE

Brown Aluminum Oxide:

38016 38017 38018 38019 38020

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

CARTON

1 1 1 1 1

UNIT

10 10 10 10 10

Premium Blue Aluminum Oxide:

38161 38163 38164 38166

AZ36-K8-V32A AZ60-K8-V32A AZ60-K8-V32A AZ120-K8-V32A

1 1 1 1

WA60-K-V WA120-K-V

10 10 10 10

1 1

10 10

1 1 1

10 10 10

Green Silicon Carbide:

38513 38514 38515

GC60-I-V GC80-I-V GC100-I-V

8 x 1 x 11/4 (H4) UPC#

3,600 R.P.M. SIZE

Brown Aluminum Oxide:

38021 38022 38023 38024 38025

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

CARTON

UNIT

1 1 1 1 1

10 10 10 10 10

Premium Blue Aluminum Oxide:

38201 38203 38204 38206

AZ36-K8-V32A AZ60-K8-V32A AZ60-K8-V32A AZ120-K8-V32A

1 1 1 1

10 10 10 10

White Aluminum Oxide:

38703 38706

WA60-K-V WA120-K-V

1 1

10 10

1 1 1

10 10 10

Green Silicon Carbide:

38516 38517 38518

GC60-I-V GC80-I-V GC100-I-V

UPC#

Brown Aluminum Oxide:

38026 38027 38028 38029 38030

38519 38520 38521

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

2,483 R.P.M. CARTON

UNIT

1 1 1 1 1

5 5 5 5 5

GC60-I-V GC80-I-V GC100-I-V

1 1 1

5 5 5

10 x 11/2 x 11/4 (H2) UPC#

SIZE

Brown Aluminum Oxide:

38031 38032 38033 38034 38035

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

2,483 R.P.M. CARTON

UNIT

1 1 1 1 1

4 4 4 4 4

1 1 1

4 4 4

Green Silicon Carbide:

38522 38523 38524

GC60-I-V GC80-I-V GC100-I-V

12 x 1 x 11/4 (H2) UPC#

SIZE

Brown Aluminum Oxide:

38036 38038 38039

A24-Q-V A46-M-V A60-M-V

2,220 R.P.M. CARTON

UNIT

1 1 1

2 2 2

1

2

Green Silicon Carbide:

38525

GC60-I-V

12 x 11/2 x 11/4 (H2) UPC#

SIZE

Brown Aluminum Oxide:

38041 38042 38043 38044

A24-Q-V A36-O-V A46-M-V A60-M-V

2,220 R.P.M. CARTON

UNIT

1 1 1 1

2 2 2 2

1 1

2 2

Green Silicon Carbide:

38528 38529

112

SIZE

Green Silicon Carbide:

White Aluminum Oxide:

38663 38666

10 x 1 x 11/4 (H2)

GC60-I-V GC80-I-V

Samples Available for Testing – Contact CGW for Details


H : 1-1/2" Hole, Installed Telescopic Bushings for 1-1/4" and 1" Arbors 3

12 x 2 x 11/2 (H3) UPC#

2,220 R.P.M.

SIZE

CARTON

38046 38047 38048 38049 38050

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

1 1 1 1 1

3 3 3 3 3

Green Silicon Carbide:

38531 38532 38533

GC60-I-V GC80-I-V GC100-I-V

1 1 1

14 x 2 x 11/2 (H3) UPC#

1,773 R.P.M.

SIZE

Brown Aluminum Oxide:

38051 38052 38053 38054 38055

3 3 3

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

CARTON

UNIT

1 1 1 1 1

3 3 3 3 3

1 1

3 3

14 x 3 x 11/2-11/4 UPC#

1,773 R.P.M.

SIZE

Brown Aluminum Oxide:

35107 35108

A24/30-Q-V A46/54-M-V

16 x 2 x 11/2 UPC#

CARTON

UNIT

1 1

3 3 1,550 R.P.M.

SIZE

UNIT

Brown Aluminum Oxide:

35109 35110

A24-Q-V A36-M-V

18 x 3 x 11/2 UPC#

1 1 1,485 R.P.M.

SIZE

Brown Aluminum Oxide:

35112 35113 35114

A24-Q-V A36-O-V A54-M-V

UNIT

1 1 1

BENCH & PEDESTAL WHEELS

Brown Aluminum Oxide:

UNIT

Green Silicon Carbide:

38534 38535

GC60-I-V GC80-I-V

Bench Wheel Bushings UPC#

SPEC.

51000 51001 51002 51003 51004 51005 51006 51007 51008

/ " Wide (Thick) 1"- / " / " Wide (Thick) 1"-1/2" 1" Wide (Thick) 1"-1/2" 1/2" Wide (Thick) 11/4"-1" 3/4" Wide (Thick) 11/4"-1" 1" Wide (Thick) 11/4"-1" 1/2" Wide (Thick) 11/2"-11/4" 3/4" Wide (Thick) 11/2"-11/4" 1" Wide (Thick) 11/2"-11/4" 1 2 3 4

UNIT 1 2

1 1 1 1 1 1 1 1 1

Samples Available for Testing – Contact CGW for Details

113


SURFACE GRINDING WHEELS

AS3 - Ceramic Aluminum Oxide • Engineered for fast metal removal with reduced dressing frequency. • Excels at grinding 50 Rockwell C and harder. • Submicron crystal structure continually fractures to produce sharp new grinding points. • Designed for heavier downfeeds and faster traverse rates with excellent form holding capabilities.

32A • Sharp mono-crystalline aluminum oxide grain with premium CGW bond offers excellent versatility and performance on a wide range of applications and materials. • Outstanding form holding wheels with free cutting grain. • Ideal for medium to heavy stock removal. • The most popular grain for tool room, surface grinding applications.

AZ - Premium Blue Aluminum Oxide • Engineered for grinding high speed steels over 55C and general purpose tool steels. • Exceptionally fast and cool cutting characteristics suitable for grinding heat sensitive, alloy steels and mold steels. • Free cutting design pulls the heat away from the part. • Friable grain for cooler grinding. Requires minimal dressing and holds its form well.

RA - Ruby Aluminum Oxide • Ideal for rough grinding of all tool steels including steel with high levels of chromium. • A tough, sharp, yet friable abrasive with high material removal rate and strong form holding capabilities. • Grain is tougher than White, AZ or Pink grain wheels.

PA - Pink Aluminum Oxide • Ideal for grinding medium and hard to grind high speed steels and alloy steels. • Sharp grain for fast, cool cutting action. • Excellent tool sharpening wheel.

WA - White Aluminum Oxide • Used when easy cutting action is needed on all surfaces. • Ideal for grinding heat-sensitive steels, as well as easy and medium to grind high speed steels. • The most friable grain choice.

114

Items with a UPC number are stocked items


Surface Grinding Wheels Selection Chart SIZE - GRIT - HARDNESS

32A

AZ Premium Blue

34301 34303 34308 34309 34310 34312 34313 34314 34315

34206 34207

RA Ruby

59025

PA Pink

WA White

58000

34600 34603 34604 34605 34606 34607

58001 58002 58003

58004 58005 58006

34608 34609 34610 34614 34615 34616 34617

58007 58008 58009 58010

34618 34619 34620 34621

58011

34622

58012

34623 34624 34625 34626

34317 34208 34210 34209

37700 37701 37702

34318 34319 34320

37767

37703

34212

37704 37705

34321 34323 34324 34325

34213

37706

37768

37728

34633 34634

34635

37729 37730

34326 34327 34328 34329 34330 34331 34332 34333 34335 34336 34337 34338

37731

34341

37732

34342 34343 34344 34345

37733 37734

34348 34349

59000

59027

34636 58013 58014

34638

59002 59028 59029

58015

34640 34642

59003

58017

59004

58018

34647 34648 34649 34650 34652 34653

58019 58020 58021

34663 34664 34671 34672 34673

58022

34674

58023 58024 58025 58026

34676 34677 34678 34679 34683

59001

SURFACE GRINDING WHEELS

6 x 1/2 x 11/4 T1 60-K 7 x 1/4 x 11/4 T1 46-I 7 x 1/4 x 11/4 T1 60-I 7 x 1/4 x 11/4 T1 60-J 7 x 1/4 x 11/4 T1 60-K 7 x 1/4 x 11/4 T1 80-J 7 x 1/4 x 11/4 T1 80-K 7 x 1/4 x 11/4 T1 80-L 7 x 1/4 x 11/4 T1 100-K 7 x 1/4 x 11/4 T1 120-K 7 x 1/4 x 11/4 T1 150-K 7 x 1/2 x 11/4 T1 46-G 7 x 1/2 x 11/4 T1 46-H 7 x 1/2 x 11/4 T1 46-I 7 x 1/2 x 11/4 T1 46-J 7 x 1/2 x 11/4 T1 46-J/K 7 x 1/2 x 11/4 T1 46-K 7 x 1/2 x 11/4 T1 60-H 7 x 1/2 x 11/4 T1 60-I 7 x 1/2 x 11/4 T1 60-J 7 x 1/2 x 11/4 T1 60-J/K 7 x 1/2 x 11/4 T1 60-K 7 x 1/2 x 11/4 T1 60-L 7 x 1/2 x 11/4 T1 80-H 7 x 1/2 x 11/4 T1 80-K 7 x 1/2 x 11/4 T1 100-K 7 x 1/2 x 11/4 T1 120-K 7 x 1/2 x 11/4 T1 150-K 7 x 1/2 x 11/4 T1 46-H12 3 7 x /4 x 11/4 (R/1-3 x 1/4) T5 46-H 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 46-I 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 46-J 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 46-K 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-H 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-J 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-J/K 7 x 1 x 11/4 (R/1-3 x 1/2) T5 46-H 7 x 1 x 11/4 (R/1-3 x 1/2) T5 46-I 7 x 1 x 11/4 (R/1-3 x 1/2) T5 46-J 7 x 1 x 11/4 (R/1-3 x 1/2) T5 46-K 7 x 1 x 11/4 (R/1-3 x 1/2) T5 60-I 7 x 1 x 11/4 (R/1-3 x 1/2) T5 60-J 7 x 1 x 11/4 (R/1-3 x 1/2) T5 60-K 8 x 1/4 x 11/4 T1 46-J 8 x 1/4 x 11/4 T1 60-J 8 x 1/4 x 11/4 T1 60-K 8 x 1/4 x 11/4 T1 80-J 8 x 1/2 x 11/4 T1 46-H 8 x 1/2 x 11/4 T1 46-I 8 x 1/2 x 11/4 T1 46-J 8 x 1/2 x 11/4 T1 46-J/K 8 x 1/2 x 11/4 T1 46-K 8 x 1/2 x 11/4 T1 60-H 8 x 1/2 x 11/4 T1 60-I 8 x 1/2 x 11/4 T1 60-J 8 x 1/2 x 11/4 T1 60-K 8 x 1/2 x 11/4 T1 80-K 3 8 x /4 x 11/4 (R/1-3 x 1/4) T5 46-H

AS3 Ceramic

58016

37769 34114 37770 37771

37707 37708 37709

34350 34351 34352

34214

37735

34215

37710 37711 37736

34353 34354 34355 34356 34357 34358 34359

59005 59006

59007 59008 59009

Items with a UPC number are stocked items

115


Surface Grinding Wheels Selection Chart

SURFACE GRINDING WHEELS

SIZE - GRIT - HARDNESS

116

8 x 3/4 x 11/4 (R/1-3 x 1/4) T5 46-J 8 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-I 8 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-J 8 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-K 8 x 1 x 11/4 (R/1-3 x 1/2) T5 46-H 8 x 1 x 11/4 (R/1-3 x 1/2) T5 46-I 8 x 1 x 11/4 (R/1-3 x 1/2) T5 46-J 8 x 1 x 11/4 (R/1-3 x 1/2) T5 46-J/K 8 x 1 x 11/4 (R/1-3 x 1/2) T5 46-K 8 x 1 x 11/4 (R/1-3 x 1/2) T5 60-I 8 x 1 x 11/4 (R/1-3 x 1/2) T5 60-J 8 x 1 x 11/4 (R/1-3 x 1/2) T5 60-J/K 8 x 1 x 11/4 (R/1-3 x 1/2) T5 60-K 10 x 1/2 x 3 T1 60-J 10 x 3/4 x 3 T1 46-I 10 x 3/4 x 3 T1 60-H 10 x 3/4 x 3 T1 60-I 10 x 1 x 2 T1 46-I 10 x 1 x 3 T1 46-H 10 x 1 x 3 T1 46-I 10 x 1 x 3 T1 46-J 10 x 1 x 3 T1 46-J/K 10 x 1 x 3 T1 46-K 10 x 1 x 3 T1 60-I 10 x 1 x 3 T1 60-J 10 x 1 x 3 T1 60-K 12 x 3/4 x 3 T1 46-H 12 x 3/4 x 3 T1 46-I 12 x 3/4 x 5 T1 60-J 12 x 1 x 3 T1 46-H 12 x 1 x 3 T1 46-I 12 x 1 x 3 T1 46-J 12 x 1 x 3 T1 46-J/K 12 x 1 x 3 T1 46-K 12 x 1 x 3 T1 60-I 12 x 1 x 3 T1 60-J 12 x 1 x 3 T1 60-K 12 x 1 x 5 T1 46-H 12 x 1 x 5 T1 46-J 12 x 1 x 5 T1 46-K 12 x 1 x 5 T1 60-J 12 x 1 x 5 T1 60-K 12 x 1 x 5 T1 80-K 12 x 11/2 x 3 (R/1-71/2 x 1/2) T5 46-H 12 x 11/2 x 3 (R/1-71/2 x 1/2) T5 46-I 12 x 11/2 x 3 (w-71/2 x 1/2) T5 46-J 12 x 11/2 x 3 (R/1-71/2 x 1/2) T5 60-I 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 46-H 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 46-I 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 46-J 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 46-J/K 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 46-K 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 60-I 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 60-J 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 60-K 12 x 1 x 5 T1 80-K 12 x 2 x 3 (R/2-71/2 x 1/2) T7 46-I 12 x 2 x 3 (R/2-61/2 x 1/2) T7 60-J

AS3 Ceramic

32A

AZ Premium Blue

RA Ruby

PA Pink

34360

WA White

34685 34688 34689 34690

34364 34366

58027

34367

58028

34696 34697

58029

34698 34700 34701

59010 34369 59011 34702 34712 34380 34383 34719 37772 37773

37737

34387 34389 34390 34391

58030 58031

34723 34724 34725

58032

34729

59012 34217 34218

37738

34392 34394 34395 34396 34397

34735 34219

37712

34220

37713

34409 34411 34412 34413

59013

58033 58034

34742 34743 34744

59014 34414 34416

34221 37775

34749 37739

34222 34223 37777

37740 37741 37742 37743 37754

34225

37714

34226

37715

34418 34419 34421 34422 34425 34426

34427 34428 34429

34752 34755 59015

58035

59016

58036

59017

58037 58038

34760 34761 34762 34763 34766 34769 34770 34771

59018 34227

37755 37744 37756

34430 34432 34433 34434 34435

Items with a UPC number are stocked items

34772 34774 34775 34776


Surface Grinding Wheels Selection Chart SIZE - GRIT - HARDNESS

32A

AZ Premium Blue

RA Ruby

PA Pink

WA White

37716 37717 37757

34436 34437 34438

59019

58039 58040

34777 34778 34779

59020 34440

34781

37758 34443 37779 34445 34115 37780 34230

37745 37718

34447 34448

59042

58048 58049

34786

59021 34232

37759

34233

37760 37746 37761 37719 37747 37720

34238 34239 34240 34243 34234 34235

34449 34450 34452 34453 34454

34790

34456 34457 34458 34459 34460

59022

37762 37721 37722

34462 34464 34465

59046

37763 37748

34466 34467

58050

34792

58041

34801 34802 34803

58042

SURFACE GRINDING WHEELS

12 x 2 x 5 (R/2-61/2 x 1/2) T7 46-H 12 x 2 x 5 (R/2-71/2 x 1/2) T7 46-I 12 x 2 x 5 (R/2-71/2 x 1/2) T7 46-J 12 x 2 x 5 (R/2-71/2 x 1/2) T7 46-J/K 12 x 2 x 5 (R/2-71/2 x 1/2) T7 60-H 12 x 2 x 5 (R/2-71/2 x 1/2) T7 60-J 12 x 2 x 5 (R/2-71/2 x 1/2) T7 60-K 14 x 1 x 3 T1 46-H 14 x 1 x 3 T1 46-I 14 x 1 x 3 T1 46-J 14 x 1 x 3 T1 60-J 14 x 1 x 5 T1 46-H 14 x 1 x 5 T1 46-I 14 x 1 x 5 T1 46-I/J 14 x 1 x 5 T1 46-J 14 x 1 x 5 T1 46-K 14 x 1 x 5 T1 60-I 14 x 1 x 5 T1 60-J 14 x 1 x 5 T1 60-K 14 x 1 x 5 T1 80-K 14 x 11/2 x 5 T1 46-H 14 x 11/2 x 5 T1 46-I 14 x 11/2 x 5 T1 46-J 14 x 11/2 x 5 T1 46-K 14 x 11/2 x 5 T1 60-H 14 x 11/2 x 5 T1 60-I 14 x 11/2 x 5 T1 60-J 14 x 11/2 x 5 (R/1-8 x 1/2) T5 46-H 14 x 11/2 x 5 (R/1-8 x 1/2) T5 46-I 14 x 11/2 x 5 (R/1-8 x 1/2) T5 46-I/J 14 x 11/2 x 5 (R/1-8 x 1/2) T5 46-J 14 x 11/2 x 5 (R/1-8 x 1/2) T5 46-K 14 x 11/2 x 5 (R/1-8 x 1/2) T5 60-H 14 x 11/2 x 5 (R/1-8 x 1/2) T5 60-I 14 x 11/2 x 5 (R/1-8 x 1/2) T5 60-J 14 x 11/2 x 5 (R/1-8 x 1/2) T5 60-K 14 x 2 x 5 T1 46-H 14 x 2 x 5 T1 46-I 14 x 2 x 5 T1 46-J 14 x 2 x 5 T1 60-J 14 x 2 x 5 (R/1-8 x 1) T5 46-H 14 x 2 x 5 (R/1-8 x 1) T5 46-I 14 x 2 x 5 (R/1-8 x 1) T5 46-J 14 x 2 x 5 (R/1-8 x 1) T5 46-K 14 x 2 x 5 (R/1-8 x 1) T5 60-I 14 x 2 x 5 (R/1-8 x 1) T5 60-J 14 x 2 x 5 (R/1-8 x 1) T5 60-K 14 x 2 x 5 (R/2-8 x 3/8) T7 46-H 14 x 2 x 5 (R/2-8 x 3/8) T7 46-I 14 x 2 x 5 (R/2-8 x 3/8) T7 46-J 14 x 2 x 5 (R/2-8 x 3/8) T7 46-K 14 x 2 x 5 (R/2-8 x 3/8) T7 60-J 16 x 11/2 x 5 T1 46-H 16 x 11/2 x 5 T1 60-H 16 x 11/2 x 5 T1 60-J 16 x 2 x 5 T1 46-I 16 x 2 x 5 T1 46-J 16 x 2 x 5 T1 60-K

AS3 Ceramic

59045

34793 34794 59023

37782 34236 37783

37749 37750

34241

37723 37764 37724 37725 37751 37765 37726 37752 37727 37766

34116

34469 34470 34471 34472 34473 34474 34480 34481 34482 34483

34795 59048 34797 34798 59049 34808 59024

34486 34487 34488 34489 34490

37753

58043 58044

34809 34811 34812 34813 34814 34816 34817

58045 58046 58047 59058 59059

34491 34500 34493 34495 34496 34497

Items with a UPC number are stocked items

117


Surface Grinding Wheels

SURFACE GRINDING WHEELS

Tool Steel Classifications

Grindability 1 GRAIN

Steel Type

Classification of Grindability

Air-Hardening Medium Alloy Cold Work Tool Steels

A2 A3 A4 A5 A6 A7 A8 A9 A10

1 1 1 1 1 1 1 1 1

D1 D2 D3 D4 D5 D6 D7

2 3 2 2 2 2 4

3

4

Easy to Grind

Hard to Grind

AS3 32A AZ RA PA WA

Air-Hardening Medium Alloy Cold Work Tool Steels

118

2

AS3 32A AZ RA PA WA

Steel Type

Classification of Grindability

Carbon-Tungsten Tool Steels

F1 F2 F3

2 2 2

Chromium Hot Work Tool Steels

H10 H11 H12 H13 H14 H16 H17

1 1 1 1 1 1 1

Tungsten Hot Work Tool Steels

H20 H21 H22 H23 H24 H25 H26

1 1 1 1 1 1 1

Steel Type

Classification of Grindability

Molybdenum Hot Work Tool Steels

H41 H42 H43

2 2 2

Low-Alloy Special Purpose Tool Steels

L1 L2 L3 L4 L5 L6 L7

1 1 1 1 1 1 1

Molybdenum High-Speed Tool Steels

M1 M2 M3 M4

2 2 3 4

Steel Type

Classification of Grindability

Molybdenum High-Speed Tool Steels (cont.)

M6 M7 M8 M10 M15 M20 M25 M30 M33 M34 M35 M40 M41 M42 M43 M44 M45 M50 M52

3 3 2 2 4 2 2 2 3 3 3 3 3 3 3 3 3 3 3

Steel Type

Classification of Grindability

Oil-Hardened Cold Work Tool Steels

O1 O2 O6 O7

1 1 1 1 Mold Steels

P1 P2 P3 P4 P5 P6 P20 P21

1 1 1 1 1 1 1 1

Shock-Resisting Tool Steels

S1 S2 S3 S4 S5 S6 S7

1 1 1 1 1 1 1

Items with a UPC number are stocked items

Steel Type

Classification of Grindability

Tungsten High-Speed Tool Steels

T1 T2 T3 T4 T5 T6 T7 T8 T9 T15 T20

2 2 3 2 3 3 2 2 4 4 4

Water-Hardening Tool Steels

W1 W2 W3 W4 W5 W7

1 1 1 1 1 1


POROUS SURFACE GRINDING WHEELS

Porous Surface Grinding Wheels

Description and Applications ■

■ ■

Engineered for medium and heavy stock removal and heat sensitive applications Strong, innovative bonds for tough applications Porous grinding wheels accelerate grinding processes CGW has multiple grains options to match all your applications goals AS3: Heavy stock removal & heat sensitive applications. 32A: Built for flexibility in stock removal. RA: For medium to heavy stock removal & heat sensitive applications. PA: For light to medium stock removal & heat sensitive applications. Porous Surface Grinding Wheels Selection Chart SIZE - GRIT - HARDNESS

AS3 Ceramic

32A

RA Ruby

PA Pink

7 x 1/2 x 11/4 T1 46-G12 7 x 1/2 x 11/4 T1 46-H12 7 x 1/2 x 11/4 T1 60-H12 8 x 1/2 x 11/4 T1 46-G12 8 x 1/2 x 11/4 T1 46-H12 8 x 1/2 x 11/4 T1 60-H12 1 10 x /2 x 11/4 (+bushing to 3/4) T1 60-H12 10 x 1 x 11/4 T1 46-H12 12 x 11/2 x 5 T5 46-H12 14 x 11/2 x 5 T1 46-H12 14 x 11/2 x 5 T5 46-H12 14 x 2 x 5 T5 46-H12

34249 34250 34251 34252 34253 34254

37786 37787 37788 37789 37790 37791 37796 37797 37792 37793 37794 37795

59080 59081 59082

58062 58063

59084 59085 59090 59091 59086 59087 59088 59089

58065 58066 58071 58072 58067 58068 58069 58070

34255 34256 34257 34258

Structure Wheel structure is the spacing of the grain in the wheel. The grain is held in position by the bond, the closer the grains (the smaller the pores), the lower the structure. The further apart the grains (the larger the pores), the higher the structure.

Closed

Open

10-14 Structures 5-8 Structures

Items with a UPC number are stocked items

119


Mounted Points Premium Pink Aluminum Oxide

Description and Applications

MOUNTED POINTS

Used in almost every industry but primarily in tool and die shops, and foundries. General applications: Deburring, tool sharpening, finishing cavities, and removes mold marks and parting lines. Mounted points are classified by shape groups A, B, and W. The semi-friable pink PA abrasive is used to produce sharp, consistent cutting action.

A-Shape Mounted Points UPC#

SIZE

DIMENSION

35951 35953 35954 35955 35957 35975

A-1 A-3 A-4 A-5 A-11 A-38

/ x 21/2 / x 23/4 11/4 x 11/4 3/4 x 11/8 7/8 x 2 1x1

R.P.M.* SHANK

CARTON

UNIT

10 10 10 10 10 10

20 20 20 20 20 20

SHANK

CARTON

UNIT

/ Shank / Shank 1/8 Shank

10 10 10

20 20 20

SHANK

CARTON

UNIT

10 10 10 10

20 20 20 20

/ / 1/4 1/4 1/4 1/4

7 8

1 4

7 8

1 4

Shank Shank Shank Shank Shank Shank

B-Shape Mounted Points UPC#

SIZE

35980 35985 36009

B-44 B-52 B-132

DIMENSION

/ x 3/8 / x 3/4 3/8 x 1/2

R.P.M.*

7 32

1 8

3 8

1 8

W-Shape Mounted Points UPC#

SIZE

DIMENSION

36042 36058 36060 36067

W-189 W-220 W-222 W-236

/ x1 1x1 1x2 11/2 x 1/2 1 2

R.P.M.* / / 1/4 1/4 1 8 1 4

Shank Shank Shank Shank

* No matter what factors of wheel size, shape, specification, mandrel size, overhang, or machine conditions are changed, the speed of 10,000 SFPM shall not be exceeded.

120

Samples Available for Testing – Contact CGW for Details


FLEXIBLE • MIX & MATCH TO YOUR NEEDS

MERCHANDISERS

Whether you have space for two, four (as shown on front), or six display row racks, the new CGW point-of-purchase display will fit your requirements. The modular display racks can be placed on pegboard or slat wall and side-by-side or in a row – You Decide What’s the Best Option for Your Showroom. Display Row Rack (#99100) Sturdy metal construction with four hooks, eye catching channel signage (#99101), rubber inventory clips and handy re-order tags.

Inventory Clip #99104

Re-Order Tag #99000

2-Pocket Chop Saw Wheel Rack (#99102) Two strong metal pockets easily hold up to 10 wheels (one carton) in each pocket. Chop saw wheel labels are clearly seen for quick wheel selection.

Pegboard display NOT included.

4-Color Display Signage Main header (#99103) is 8” (H) x 24” (W); double-sided tape at top for simple attachment. Display row rack channel sign (#99101) is 2” (H) x 24” (W); one doublesided tape strip for permanent attachment. Tips ■ ■

Flexible. You select the CGW items to display. Peg hooks are uniformly spaced 5-1/2" between each hook. Spacing allows for a variety of product mixes on one row including 7" wheels/discs. (Note: 7" products must be hung next to 4-1/2" or smaller products. Larger products will overlap.) Racks may be placed side-by-side or in a row.

Contact CGW Customer Service for Program Details

121


PRODUCT INDEX

UPC

122

PAGE #

UPC

PAGE #

UPC

PAGE #

UPC

PAGE #

30001 - 30036 . . . . . . . .25

35634 - 35635 . . . . . . . .78

36189 - 36190 . . . . . . . .78

37772 - 37777 . . . . . . .116

31011 - 31265 . . . . . . . .22

35636 - 35637 . . . . . . . .83

36203 . . . . . . . . . . . 29, 31

37779 - 37783 . . . . . . .117

34114 . . . . . . . . . . . . . .115

35638 - 35639 . . . . . . . .78

36204 - 36206 . . . . . . . .33

37786 - 37797 . . . . . . .119

34115 - 34116 . . . . . . .117

35640 - 35641 . . . . . . . .80

36207 - 36218 . . . . 42, 67

38003 - 38015 . . . . . . .111

34206 - 34215 . . . . . . .115

35642 - 35643 . . . . . . . .81

36219 - 36228 . . . . . . . .78

38016 - 38044 . . . . . . .112

34217 - 34227 . . . . . . .116

35644 - 35645 . . . . . . . .80

36229 - 36230 . . . . . . . .79

38046 - 38055 . . . . . . .113

34230 - 34243 . . . . . . .117

35646 - 35647 . . . . . . . .81

36231 - 36232 . . . . . . . .81

38111 - 38126 . . . . . . .111

34249 - 34258 . . . . . . .119

35648 - 35649 . . . . . . . .78

36233 . . . . . . . . . . . . . . .86

38161 - 38206 . . . . . . .112

34301 - 34359 . . . . . . .115

35650 - 35651 . . . . . . . .83

36234 . . . . . . . . . . . . . . .88

38501 - 38512 . . . . . . .111

34360 - 34435 . . . . . . .116

35652 - 35653 . . . . . . . .78

36235 - 36237 . . . . . . . .27

38513 - 38529 . . . . . . .112

34440 - 34500 . . . . . . .117

35654 - 35655 . . . . . . . .80

36238 - 36240 . . . . . . . .93

38531 - 38535 . . . . . . .113

34600 - 34683 . . . . . . .115

35656 - 35657 . . . . . . . .81

36241 - 36243 . . . . . . . .66

38562 - 38626 . . . . . . .111

34685 - 34776 . . . . . . .116

35658 - 35659 . . . . . . . .80

36244 - 36249 . . . . . . . .79

38663 - 38706 . . . . . . .112

34777 - 34817 . . . . . . .117

35660 - 35661 . . . . . . . .81

36250 . . . . . . . . . . . 42, 67

39202 - 39605 . . . . . . . .23

35005 - 35053 . . . . . . .110

35662 - 35667 . . . . . . . .79

36255 - 36264 . . . . . . . .81

39722 - 39745 . . . . . . . .13

35107 - 35114 . . . . . . .113

35670 . . . . . . . . . . . . . . .88

36265 - 36282 . . . . . . . .82

39802 - 39835 . . . . . . . .23

35500 - 35512 . . . . . . . .84

35671 . . . . . . . . . . . . . . .78

36283 - 36288 . . . . . . . .66

39903 - 39939 . . . . . . . .40

35514 . . . . . . . . . . . . . . .72

35672 . . . . . . . . . . . . . . .81

36289 - 36290 . . . . . . . .83

39941 - 39956 . . . . . . . .41

35515 . . . . . . . . . . . . . . .74

35673 - 35674 . . . . . . . .80

36292 - 36294 . . . . . . . .27

39960 - 39999 . . . . . . . .42

35516 . . . . . . . . . . . . . . .72

35675 - 35676 . . . . . . . .78

36301 - 36304 . . . . . . . .74

40002 - 40006 . . . . . . . .40

35517 . . . . . . . . . . . . . . .72

35677 - 35678 . . . . . . . .80

36310 - 36327 . . . . . . . .17

40007 - 41008 . . . . . . . .42

35518 . . . . . . . . . . . . . . .72

35679 - 35683 . . . . . . . .79

36328 - 36339 . . . . . . . .19

41015 - 41017 . . . . . . . .40

35573 - 35574 . . . . . . . .86

35685 - 35686 . . . . . . . .88

36348 - 36350 . . . . . . . .17

41018 - 41020 . . . . . . . .41

35575 - 35576 . . . . . . . .88

35687 - 35691 . . . . . . . .84

36400 - 36409 . . . . . . . .80

41025 - 41031 . . . . . . . .46

35577 . . . . . . . . . . . . . . .87

35697 - 35698 . . . . . . . .83

36450 - 36461 . . . . 43, 68

41032 - 41039 . . . . . . . .40

35578 . . . . . . . . . . . . . . .88

35699 . . . . . . . . . . . . . . .81

37098 - 37105 . . . . . . . .40

41044 . . . . . . . . . . . . . . .41

35579 - 35585 . . . . . . . .87

35830 - 35847 . . . . . . . .27

37510 - 37525 . . . . . . . .83

41045 - 41101 . . . . . . . .46

35587 - 35589 . . . . . . . .90

35851 . . . . . . . . . . . . . . .88

37530 - 37535 . . . . . . . .80

41121 - 41530 . . . . . . . .41

35590 - 35598 . . . . . . . .91

35900 - 35901 . . . . . . . .93

37540 . . . . . . . . . . . . . . .83

41608 . . . . . . . . . . . . . . .42

35599 - 35600 . . . . . . . .90

35951 - 36067 . . . . . . .120

37543 . . . . . . . . . . . . . . .80

41630 - 41631 . . . . . . . .40

35601 - 35606 . . . . . . . .91

36102 - 36105 . . . . . . . .81

37545 - 37555 . . . . . . . .83

41701 - 42012 . . . . . . . .20

35608 . . . . . . . . . . . . . . .92

36106 - 36112 . . . . . . . .83

37573 - 37574 . . . . . . . .86

42101 - 42376 . . . . . . . .14

35609 . . . . . . . . . . . . . . .78

36113 - 36115 . . . . . . . .90

37670 . . . . . . . . . . . . . . .79

42401 - 42455 . . . . . . . .12

35610 . . . . . . . . . . . . . . .81

36116 - 36117 . . . . . . . .91

37671 . . . . . . . . . . . . . . .87

42500 - 42575 . . . . . . . .15

35611 . . . . . . . . . . . . . . .80

36122 . . . . . . . . . . . . . . .88

37672 . . . . . . . . . . . . . . .92

42601 - 42655 . . . . . . . .12

35612 - 35617 . . . . . . . .78

36123 - 36125 . . . . . . . .89

37673 . . . . . . . . . . . . . . .87

42700 - 42775 . . . . . . . .15

35618 - 35619 . . . . . . . .83

36126 . . . . . . . . . . . . . . .90

37700 - 37711 . . . . . . .115

42801 - 42835 . . . . . . . .12

35620 - 35621 . . . . . . . .80

36133 . . . . . . . . . . . . . . .88

37712 - 37715 . . . . . . .116

43081 - 43271 . . . . . . . .24

35622 - 35623 . . . . . . . .81

36142 - 36143 . . . . . . . .90

37716 - 37727 . . . . . . .117

43320 - 43343 . . . . . . . .21

35624 - 35626 . . . . . . . .80

36144 - 36147 . . . . . . . .91

37728 - 37736 . . . . . . .115

45001 - 45002 . . . . . . . .73

35627 . . . . . . . . . . . . . . .81

36156 - 36157 . . . . . . . .83

37737 - 37744 . . . . . . .116

45003 - 45005 . . . . . . . .75

35628 . . . . . . . . . . . . . . .80

36158 - 36159 . . . . . . . .90

37745 - 37753 . . . . . . .117

45006 . . . . . . . . . . . . . . .75

35629 . . . . . . . . . . . . . . .81

36160 - 36161 . . . . . . . .91

37754 - 37755 . . . . . . .116

45007 - 45008 . . . . . . . .73

35630 - 35631 . . . . . . . .78

36162 - 36163 . . . . . . . .92

37756 - 37766 . . . . . . .117

45009 . . . . . . . . . . . . . . .75

35632 - 35633 . . . . . . . .80

36173 - 36180 . . . . . . . .85

37767 - 37771 . . . . . . .115

45010 - 45016 . . . . . . . .72

Samples Available for Testing – Contact CGW for Details


UPC

PAGE #

UPC

PAGE #

UPC

PAGE #

UPC

PAGE #

48226 . . . . . . . . . . . . . . .33

59512 - 59579 . . . . . . . .35

62453 - 62487 . . . . . . . .97

45019 - 45032 . . . . . . . .76

48226 . . . . . . . . . . . . . . .65

59587 - 59600 . . . . . . . .34

62493 - 62526 . . . . . . . .98

45036 . . . . . . . . . . . . . . .80

48227 . . . . . . . . . . . . . . .84

59608 - 59616 . . . . 38, 67

62604 - 62614 . . . . . . . .94

45037 - 45038 . . . . . . . .78

48228 . . . . . . . . . . . . . . .81

59621 - 59683 . . . . . . . .37

62621 - 62634 . . . . . . . .95

45039 - 45040 . . . . . . . .80

48229 . . . . . . . . . . . . . . .33

59696 - 59709 . . . . . . . .36

62642 - 62658 . . . . . . . .96

45041 - 45042 . . . . . . . .74

48230 - 48236 . . . . . . . .30

59717 - 59723 . . . . . . . .35

62668 - 62669 . . . . . . . .98

45043 . . . . . . . . . . . . . . .78

48239 - 48240 . . . . . . . .33

59728 - 59731 . . . . . . . .38

63002 - 63091 . . . . . . . .47

45045 . . . . . . . . . . . . . . .79

48245 . . . . . . . . . . . . . . .84

59732 - 59738 . . . . 25, 38

70000 - 70028 . . . . . . . .64

45046 . . . . . . . . . . . . . . .76

48250 . . . . . . . . . . . . . . .42

59900 - 59927 . . . . . . . .34

70029 - 70037 . . . . . . . .65

45047 . . . . . . . . . . . . . . .73

48251 - 48252 . . . . 29, 31

59940 - 59967 . . . . . . . .36

70038 - 70056 . . . . . . . .63

45048 - 45049 . . . . . . . .80

48320 - 48434 . . . . . . . .32

60000 . . . . . . . . . . . . . .104

70057 - 70093 . . . . . . . .43

45050 - 45051 . . . . . . . .72

48501 - 48519 . . . . . . . .29

60001 - 60055 . . . . . . .100

70094 - 70104 . . . . . . . .77

45052 . . . . . . . . . . . . . . .78

48528 - 48542 . . . . . . . .31

60060 - 60127 . . . . . . .101

70105 - 70109 . . . . . . . .86

45053 . . . . . . . . . . . . . . .81

48621 - 48626 . . . . . . . .29

60130 - 60196 . . . . . . .102

70110 . . . . . . . . . . . . . . .88

45066 . . . . . . . . . . . . . . .84

48711 - 48726 . . . . . . . .28

60200 - 60213 . . . . . . .104

70111 . . . . . . . . . . . . . . .86

45071 - 45072 . . . . . . . .87

48731 - 48746 . . . . . . . .29

60220 - 60230 . . . . . . .105

70112 - 70113 . . . . . . . .88

45080 . . . . . . . . . . . . . . .74

48801 - 48836 . . . . . . . .30

60500 - 60526 . . . . . . .106

70114 - 70115 . . . . . . . .73

45081 - 45082 . . . . . . . .80

48881 - 48906 . . . . . . . .31

60535 - 60565 . . . . . . .107

70120 - 70125 . . . . 26, 68

45085 - 45088 . . . . . . . .84

48921 - 48926 . . . . . . . .30

60575 - 60593 . . . . . . .108

70130 - 70149 . . . . . . . .58

45089 . . . . . . . . . . . . . . .87

49000 - 49043 . . . . . . . .93

60650 - 60665 . . . . . . .109

70150 - 70160 . . . . . . . .59

45098 . . . . . . . . . . . . . . .73

49233 . . . . . . . . . . . . . . .29

61000 - 61031 . . . . . . . .48

70211 - 70212 . . . . . . . .39

45099 . . . . . . . . . . . . . . .75

49501 - 49531 . . . . . . . .33

61032 - 61071 . . . . . . . .49

70220 - 70225 . . . . . . . .92

45100 - 45102 . . . . . . . .72

49532 - 49537 . . . . . . . .65

61072 - 61087 . . . . . . . .50

71000 - 71150 . . . . . . . .39

45103 . . . . . . . . . . . . . . .73

51000 - 51008 . . . . . . .113

61088 - 61147 . . . . . . . .51

71151 . . . . . . . . . . . . . . .66

45104 . . . . . . . . . . . . . . .74

52321 - 52375 . . . . . . . .18

61148 - 61189 . . . . . . . .53

72000 - 72045 . . . . . . . .60

45105 - 45106 . . . . . . . .72

53001 - 53075 . . . . . . . .15

61190 - 61234 . . . . . . . .54

72050 - 72073 . . . . . . . .61

45113 - 45114 . . . . . . . .76

54001 - 54065 . . . . . . . .16

61235 - 61273 . . . . . . . .55

72100 - 72109 . . . . . . . .44

45200 - 45207 . . . . . . . .79

56002 - 56186 . . . . . . . .24

61274 - 61310 . . . . . . . .56

72110 - 72119 . . . . . . . .45

45208 - 45209 . . . . . . . .83

58000 - 58026 . . . . . . .115

61500 - 61523 . . . . . . . .48

99100 - 99103 . . . . . . .122

45210 - 45217 . . . . . . . .78

58027 - 58038 . . . . . . .116

61524 - 61553 . . . . . . . .49

45218 - 45223 . . . . . . . .77

58039 - 58050 . . . . . . .117

61554 - 61571 . . . . . . . .50

45224 . . . . . . . . . . . . . . .72

58062 - 58072 . . . . . . .119

61572 - 61589 . . . . . . . .52

45225 . . . . . . . . . . . . . . .73

59001 - 59009 . . . . . . .115

61590 - 61601 . . . . . . . .53

45226 - 45227 . . . . . . . .72

59010 - 59018 . . . . . . .116

61602 - 61607 . . . . . . . .54

45228 . . . . . . . . . . . . . . .73

59019 - 59024 . . . . . . .117

61608 - 61613 . . . . . . . .53

45229 - 45232 . . . . . . . .74

59025 - 59029 . . . . . . .115

61614 - 61619 . . . . . . . .54

45233 . . . . . . . . . . . . . . .75

59042 - 59059 . . . . . . .117

61620 - 61637 . . . . . . . .56

48000 - 48028 . . . . . . . .28

59060 - 59063 . . . . . . . .62

62001 - 62057 . . . . . . . .94

48030 - 48049 . . . . . . . .29

59080 - 59091 . . . . . . .119

62065 - 62113 . . . . . . . .95

48100 - 48146 . . . . . . . .30

59100 - 59101 . . . . . . . .79

62116 - 62150 . . . . . . . .96

48181 - 48206 . . . . . . . .31

59102 - 59108 . . . . . . . .85

62153 - 62187 . . . . . . . .97

48218 - 48224 . . . . . . . .33

59109 - 59110 . . . . . . . .86

62193 - 62226 . . . . . . . .98

48224 . . . . . . . . . . . . . . .65

59111 - 59116 . . . . . . . .85

62301 - 62357 . . . . . . . .94

48225 . . . . . . . . . . . . . . .33

59200 - 59211 . . . . . . . .62

62365 - 62413 . . . . . . . .95

48225 . . . . . . . . . . . . . . .65

59503 - 59511 . . . . 38, 67

62416 - 62450 . . . . . . . .96

Samples Available for Testing – Contact CGW for Details

PRODUCT INDEX

45017 . . . . . . . . . . . . . . .75

123


124

NOTES


NOTES

125


CGW – CAMEL GRINDING WHEELS

CGW-Camel Grinding Wheels is one of the world’s leading suppliers of grinding wheels since 1956. Providing superior quality products (complying with ISO 9001: 2000 standards) and service at competitive prices has led to our rapid world wide growth. We encourage you to contact a CGW sales representative to obtain samples for testing. You’ll immediately realize the advantages CGW offers.

CGW, Camel Grinding Wheels plant in Kibbutz Sarid, Israel

126


CGW – CAMEL GRINDING WHEELS

90,000 square foot CGW, Camel Grinding Wheels facility in Niles, IL USA.

oSa – The Missing Element for Safety CGW-Camel Grinding Wheels, is a proud member of the international organization oSa (www.osa-abrasives. org). oSa – the Organization for the Safety of Abrasives – is a society formed by leading international abrasive manufacturers to ensure the quality of their products is consistently high and adheres to standards to minimize risks to product users. In the year 2000, a collective of European abrasive manufacturers recognized the need for global abrasive safety requirements and created oSa. oSa members voluntarily agree to manufacture market safe and accident-preventing quality abrasives in accordance with European safety standards and oSa testing regulations. oSa member products are monitored for conformity with the most up-to-date standards and provisions. Products marked with the oSa logo reflect high-grade production and high safety test standards. As a member of oSa, CGW excels at minimizing the potential for risk by controlled production, adherence to and implementation of quality assurance measures and thorough in-company production. When purchasing bonded abrasive products, insist the manufacturer is an official oSa member for quality, safe products.

127


7525 North Oak Park Ave., Niles, IL 60714 Ph: 800-447-4248 • Fax: 800-447-3731 www.cgwheels.com ©2010 CGW-Camel Grinding Wheels, USA

#990031

Camel Metal Fabrication Catalog  

Metal Fabrication Catalog