IMPACT SOCKETS & SLUGGING WRENCHES
m o .c
e u q r o T n
w
Ca . w w
Impact sockets, accessoRIes anD socket sets • • • •
Standard, Deep and Thinwall Sockets Up to 3.1/2” square drive Impact Sockets through to 235MM (9.1/8”) across the flats # 5 spline drive to across the flats Wide variety of Accessories
FREECORNER PROFILE
The Freecorner profile is provided on the square drives as well as on the hexagon end of Impact Sockets 1/2” square drive and above.
Conventional Profile Corner point contact high stress areas
Highlights show contact points on the corner of the fastener
Freecorner Profile
Distributed surface loads relieves possibe stress area
Highlights show contact points away from the corner of the fastener
THE BENEFITS OF THE FREECORNER PROFILE INCLUDE ARE:
• Reduced risk of fastener rounding. • Increased chances of turning worn fasteners. • Elimination of high stress concentration points increasing the impact resistance and the torque transmitting capability.
CANTORQUE IMPACT SOCKETS
CanTorque Impact Sockets of 1/2” square drive and above feature freecorner for flats above 17 mm (5/8”). • • • • • • • •
All Impact Sockets are made from high strength alloy steel. All Impact Sockets are heat treated for the best combination of strength and impact resistance. All Impact Sockets have an optimum wall thickness for strength and access on fasteners having restrictions. The depth of the Hex openings is designed to accomodate the full standard fastener head. All Impact Sockets have chamfered openings for ease in engagement with the drive tool and the fastener. Concentric openings and large clearance holes to meet industrial specifications. All Impact Sockets have a Ring-N-Pin arrangement for securing them to the drive. Sockets are plated and black oxidized coated for increased protection from rusting.
saFetY notIce Sockets in this catalog are designed for impact use. Always use safety goggles when using impact equipment.
2
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
InDeX
4 6 9 13 19 22 25 26 29 30 32 33 34 35 37 38 cantoRQUe waRRantY The CanTorque warranty will replace free to the original purchaser any qualifying socket found to be defective in either material or workmanship, indicated by premature wear or breakage. Determination of free replacement will be done by your CanTorque distributor. Impact Sockets, by nature of their application are subject to extreme stresses, therefore special application sockets such as thinwall, hex driver, accessories and slugging wrenches are speciďŹ cally excluded from the replacement warranty.
www.cantorque.com • impact sockets & slugging wrenches
3
Impact sockets 3/8”
4
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
Impact sockets thInwall 3/8”
Impact accessoRIes
www.cantorque.com • impact sockets & slugging wrenches
5
Impact sockets 1/2”
6
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
Impact sockets sets 1/2”
Impact sockets
www.cantorque.com • impact sockets & slugging wrenches
7
Impact sockets 1/2”
Impact accessoRIes
8
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
Impact sockets 3/4”
www.cantorque.com • impact sockets & slugging wrenches
9
Impact sockets 3/4”
10
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
Impact sockets thInwall 3/4”
www.cantorque.com • impact sockets & slugging wrenches
11
Impact sockets accessoRIes 3/4”
12
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
Impact sockets 1”
www.cantorque.com • impact sockets & slugging wrenches
13
Impact sockets 1”
14
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
Impact sockets 1”
www.cantorque.com • impact sockets & slugging wrenches
15
Impact sockets 1”
16
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
Impact sockets thInwall 1”
www.cantorque.com • impact sockets & slugging wrenches
17
Impact accessoRIes 1”
18
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
Impact sockets 1 1/2”
www.cantorque.com • impact sockets & slugging wrenches
19
Impact sockets 1 1/2”
20
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
IMPACT ACCESSORIES 1 1/2”
CanTorque Impact Sockets ideal for use with Hydraulic Torque Wrenches.
www.cantorque.com • IMPACT SOCKETS & SLUGGING WRENCHES
21
IMPACT SOCKETS 2 1/2”
22
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
IMPACT SOCKETS 2 1/2”
www.cantorque.com • IMPACT SOCKETS & SLUGGING WRENCHES
23
IMPACT ACCESSORIES 2 1/2”
CanTorque Impact Sockets used along with a CanTorque Torque Multiplier.
24
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
IMPACT SOCKETS 3 1/2”
IMPACT ACCESSORIES
www.cantorque.com • IMPACT SOCKETS & SLUGGING WRENCHES
25
IMPACT SOCKETS
26
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
IMPACT SOCKETS
IMPACT ACCESSORIES
www.cantorque.com • IMPACT SOCKETS & SLUGGING WRENCHES
27
SOCKET ACCESSORIES
28
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
CASTELLATED SOCKETS
www.cantorque.com • IMPACT SOCKETS & SLUGGING WRENCHES
29
STRAIGHT SLUGGING WRENCHES
30
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
STRAIGHT SLUGGING WRENCHES
www.cantorque.com • IMPACT SOCKETS & SLUGGING WRENCHES
31
OFFSET SLUGGING WRENCHES
32
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
OPEN JAW SLUGGING WRENCHES
www.cantorque.com • IMPACT SOCKETS & SLUGGING WRENCHES
33
BOX BI-HEX SLUGGING WRENCHES
34
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
STRUCTURAL WRENCHES
(OFFSET RING TYPE)
STRUCTURAL WRENCHES
(OFFSET OPEN JAW TYPE)
www.cantorque.com • IMPACT SOCKETS & SLUGGING WRENCHES
35
STRUCTURAL WRENCHES
(FLAT RING TYPE)
STRUCTURAL WRENCHES
(FLAT OPEN JAW TYPE)
36
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
INSERT SOCKETS
www.cantorque.com • IMPACT SOCKETS & SLUGGING WRENCHES
37
TURBINE TOOLS
38
IMPACT SOCKETS & SLUGGING WRENCHES • www.cantorque.com
NOTES
______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ www.cantorque.com • IMPACT SOCKETS & SLUGGING WRENCHES
39
DISTRIBUTED BY:
CanTorque Inc. 14635-119 Avenue, Edmonton, Alberta, Canada T5L 2N9 Phone: +1-780-436-2000 Fax: +1-780-732-0905 Toll Free: 1-877-436-4364 Email: info@cantorque.com Twitter: @cantorque Facebook: www.facebook.com/CanTorqueInc www.cantorque.com