Norwegian Greentech - BWMS - Passion for CLEAN WATER

Passion for CLEAN WATER

Norwegian Greentech BWMS

Norwegian Greentech

Norwegian Greentech is a Norwegian company, established in 2010 in Fosnavåg, and is a part of the HAV Group. The company is focusing on water treatment systems for the maritime industry. The main products are ballast water treatment systems and process water treatment systems for live fish carriers and land-based aquaculture.

Norwegian Greentech consists of highly motivated employees with long experience from several other companies in the Norwegian Maritime Cluster. With knowledge about the high demands in maritime operations we aim to give our customers the best service at all time.

Dedicated and trustworthy, based on feedback and focused on results!

About Norwegian Greentech

NGT BWMS – about the system

Aquaculture – Supplier of Process Water Treatment

Service & aftermarket

Key Selling Points

BWMS Compact – small capacity range

BWMS Compact – medium capacity range

BWMS Compact – large capacity range

Sustainability – Clean Water solutions

Approvals & Certificates

NGT sales and service partners

NGT BWMS

– about the system

NGT BWMS make use of the latest UV-technology commercially available today, based on medium pressure UV-radiation. Which is the most efficient UVtechnology for Ballast Water Treatment.

UV- light has proved to be a very “clean” alternative to active substances. Unlike these methods, UV does not produce any disinfection-by-products (DBPs).

The UV-sensor is places in between the lamps, “looking 360 degrees” and senses all lamps simultaneously. Lamps and sensor are covered by the same quart sleeves, and is cleaned by an state of the art wiping mechanism.

With 20-micron prefiltration we ensure great treatment efficiency for the UV which again results in low power consumption and low apex cost.

Aquaculture – Supplier of Process Water Treatment Systems

Norwegian Greentech is a supplier of highly efficient process water treatment systems for live fish carriers and land-based aquaculture.

The Process water treatment systems are based on filter and UV technology and is approved by the veterinarian institute.

In this segment we have a close cooperation with MMC First Process.

Service & aftermarket

With our skilled and motivated service team, as well as our trained partners, we will provide advice and guidance if problems occur, and we are ready to act at very short notice.

Please contact our Service & Aftermarket department: service@norwegiangt.no

Why choose NGT BWMS

• Most compact unit on the market

• Lowest power consumption on the market

•

•

•

•

•

•

• Reliable and dedicated organization (talk to the expert)

•

Delivery options:

Skid: Semi Skid, mounted: Semi Skid, loose delivery:

Main components:

Completely mounted unit including BWMS main control cabinet and UV control cabinet.

Completely mounted unit, but BWMS main control cabinet and UV control cabinet are delivered as loose components

Includes all Semi Skid components, but not assembled

Includes all components to be in compliance with NGT TA

Compact – small capacity range

D0100-NGT BWMS DL2-BK273

D0100-NGT BWMS DL2-BK273

System TRC:

60m3/h

D0200-NGT BWMS DL3-BK324

D0200-NGT BWMS DL3-BK324

Minimum 25m3/h, maximum 60m3/h Minimum 3m3/h, maximum 60m3/h Minimum 7KW, maximum 9,3KW 820mm x 650mm (L x W) 1423mm

Full skid, semi-skid, semi-skid loose, main components 90m3/h

D0300-NGT BWMS DL4-BK356

D0300-NGT BWMS DL4-BK356

System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config: System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config: System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config:

Cover flow rates from 25 – 204 m3/h

Minimum 26m3/h, maximum 90m3/h Minimum 4m3/h, maximum 90m3/h Minimum 6,5KW, maximum 11,8KW 1020mm x 790mm (L x W) 1682mm

max TRC 60m3/h max TRC 90m3/h max TRC 150m3/h

Full skid, semi-skid, semi-skid loose, main components 150m3/h Minimum 33m3/h, maximum 150m3/h Minimum 5m3/h, maximum 150m3/h Minimum 8KW, maximum 14,3KW 1072mm x 790mm (L x W) 1682mm

Full skid, semi-skid, semi-skid loose, main components

m3/h 60 90 150

D0400-NGT BWMS DXL6-BK356

D0400-NGT BWMS DXL6-BK356

System TRC:

m3/h

200m3/h

D0410-NGT BWMS DXL9-BK356

D0410-NGT BWMS DXL9-BK356

System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config: System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config:

Minimum 36m3/h, maximum 200m3/h

Minimum 8m3/h, maximum 200m3/h Minimum 11KW, maximum 19,3KW 1071,5mm x 790mm (L x W) 1815mm

max TRC 200m3/h max TRC 204m3/h

Full skid, semi-skid, semi-skid loose, main components 204m3/h

Minimum 40m3/h, maximum 204m3/h Minimum 12m3/h, maximum 204m3/h Minimum 15,2KW, maximum 26,8KW 1071,5mm x 790mm (L x W) 1815mm

Full skid, semi-skid, semi-skid loose, main components

200 204

Compact – medium capacity range

D0420-NGT BWMS DXL9-BK419

D0420-NGT BWMS DXL9-BK419

D0500-NGT BWMS DXL12-BK419

D0500-NGT BWMS DXL12-BK419

D0600-NGT BWMS D4XL8-BK419

D0600-NGT BWMS D4XL8-BK419

System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config: System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config: System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config:

Cover flow rates from 204 – 614 m3/h

260m3/h

Minimum 52m3/h, maximum 260m3/h Minimum 12m3/h, maximum 260m3/h Minimum 15,5KW, maximum 33,3KW 1047,5mm x 1190mm (L x W) 1806mm

Full skid, semi-skid, semi-skid loose, main components 350m3/h

Minimum 55m3/h, maximum 350m3/h Minimum 15m3/h, maximum 350m3/h Minimum 20KW, maximum 11,8KW 1047,5mm x1190mm (L x W) 1806mm

max TRC 260m3/h max TRC 350m3/h max TRC 378m3/h

Full skid, semi-skid, semi-skid loose, main components 378m3/h

Minimum 57m3/h, maximum 378m3/h Minimum 17m3/h, maximum 378m3/h Minimum 22,4KW, maximum 14,3KW 1047,5mm x 1190mm (L x W) 2095mm

Full skid, semi-skid, semi-skid loose, main components

m3/h 260 350 378

D0620-NGT BWMS D4XL8-BK521

D0620-NGT BWMS D4XL8-BK521

m3/h

D0700-NGT BWMS D4XL10-BK521

D0700-NGT BWMS D4XL10-BK521

460m3/h

Minimum 57m3/h, maximum 460m3/h Minimum 17m3/h, maximum 460m3/h Minimum 22,4KW, maximum 33,3KW 1940mm x 1190mm (L x W) 2067,5mm

Full skid, semi-skid, semi-skid loose, main components 518m3/h

D0800-NGT BWMS D4XL10-BK600

D0800-NGT BWMS D4XL10-BK600

Minimum 62m3/h, maximum 518m3/h Minimum 22m3/h, maximum 518m3/h Minimum 27,5KW, maximum 11,8KW 1940mm x1340mm (L x W) 2067,5mm

Full skid, semi-skid, semi-skid loose, main components 600m3/h

D0810-NGT BWMS D4XL12-BK600

D0810-NGT BWMS D4XL12-BK600

System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config: System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config: System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config: System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config:

Minimum 62m3/h, maximum 600m3/h Minimum 22m3/h, maximum 600m3/h Minimum 27,5KW, maximum 53,3KW 2170mm x 1570mm (L x W) 2147mm

max TRC 460m3/h max TRC 518m3/h max TRC 600m3/h max TRC 614m3/h

Full skid, semi-skid, semi-skid loose, main components 614m3/h

Minimum 66m3/h, maximum 614m3/h

Minimum 26m3/h, maximum 614m3/h Minimum 32,6KW, maximum 61,8KW 2170mm x 1570mm (L x W) 2147mm

Full skid, semi-skid, semi-skid loose, main components

460 518 600 614

Compact – large capacity range

D0900-NGT BWMS D4XL12-BK750

D0900-NGT BWMS D4XL12-BK750

D1000-NGT BWMS D5XL14-BK750

D1000-NGT BWMS D5XL14-BK750

D1100-NGT BWMS D5XL16-BK750

D1100-NGT BWMS D5XL16-BK750

System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config: System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config: System TRC: System flow ballasting: System flow de-ballasting: Power consumption: Skid footprint: Total height: System config:

Cover flow rates from 614 – 1274 m3/h

750m3/h

Minimum 66m3/h, maximum 750m3/h Minimum 26m3/h, maximum 750m3/h Minimum 32,6KW, maximum 33,3KW 3130mm x 1580mm (L x W) 2518,5mm

Full skid, semi-skid, semi-skid loose, main components 1005m3/h

Minimum 88m3/h, maximum 1005m3/h Minimum 30m3/h, maximum 1005m3/h Minimum 37,8KW, maximum 11,8KW 3130mm x1580mm (L x W) 2614mm

max TRC 750m3/h max TRC 1005m3/h max TRC 1274m3/h

Full skid, semi-skid, semi-skid loose, main components 1274m3/h Minimum 92m3/h, maximum 1274m3/h Minimum 34m3/h, maximum 1274m3/h Minimum 42,8KW, maximum 14,3KW 3130mm x 1580mm (L x W) 2614mm

Full skid, semi-skid, semi-skid loose, main components

m3/h 750 1005 1274

Sustainability –Clean Water solutions

The UN Sustainable Development Goals, political ambitions and new regulations push us and our customers to develop the solutions of the future already today.

This is good news for the environment.

We are passionate about using our knowledge to solve these challenges by creating energy-efficient products and cutting emissions, while at the same time increasing our customers’ profitability, competitiveness, and value creation by giving them a tool for the future.

Approvals & Certificates

DNV (IMO)

U.S. Coast Guard Bureau Veritas (BV)

Lloyd’s Register (LR) French Flag - MMF Russian Maritime Register of Shipping (RMRS) Transport Canada

Approvals & Certificates Norwegian Greentech BWMS is certified in accordance with IMO and USCG and is approved for use in all water salinities: fresh, brackish and marine, with no required holding time.

USCG AMS RMRS

Bureau Veritas Lloyd´s Register Transport Canada

Finland: SEPTOR OY Laurinmäenkuja 3 00440 Helsinki Finland

Contact person: Mr. Fredrik Björklöf +358 20 7209630 fredrik.bjorklof@septor.fi

Turkey:

Contact person: Mr. Umur Culha +90 216 701 1903 info@oceanist.com.tr

Germany, Netherlands and Belgium:

STEINBACH INGENIEURTECHNIK Robert-Bosch Strassw 7A DE-23909 Ratzeburg Germany

Contact person: Mr. Jörg Steinbach Tel: +49 4541 802610 info@si-technik.de

Russia:

Contact person: Mr. Vladimir Potapov +7 921 937 79 28 v.i.potapov@impro-spb.com

Poland: TRIMOR Sp. z o. o. ul. Andersa 17/2 81-831 Sopot Poland

Contact person: Mr. Jerzy Stankiewicz Tel: +48 58 551 29 99, Tel: +48 58 551 66 40 trimor@trimor.com.pl

Greece

India:

Contact person: Andreas Pamfylou Mobile: +30 69700 89970 info@dta-techs.com

Contact person: Mohan Raju info@indostan.in

Graphic Design: CANN AS

Photo cover: Njord Freediver