Essenza EN 97.W coffee machine The company Nestlé Nespresso S.A., that works with the logo Nespresso, is a society thet is part of the company Nestlé. It comercializes mainly coffee machines and coffee pods. It was founded by Eric Favre in 1976 and now is a worldwide known company. De’ Longhi S.p.a. is an Italian company founded in 1902 that operates in the field of air conditioning, heating and products for cooking, cleaning, coffee making and ironing.
The product Essenza EN 97.W is a coffee machine created by the company DeLonghi and realized with the Nespresso system. It is characterized by a compact design and it fits every kitchen. The machine is also really easy to use, with a few buttons and steps it will be very easy to prepare a coffee. It warms up in a short time thanks to the 19 bars engine (with a new thermoblock system) and after use it turns off automatically.
WUP 2020 / 21 Drawing 3D CAD 1 and 2 Perspective, left, front and back view
Julia Beruffi WS 2020 / 21 or SS 2021
WUP 2020 / 21 Drawing 3D CAD 1 and 2 Main elements of the machine
1
3 2
5
4
1. Lever Part of a mechanism that pierces the pod and push it against the machine making the coffee powder fall.
4. Drip drawer It is made up of two parts, on the front there is a drip tray and on the back there is the container for the tray.
2. Tray Here fall the used pods. It is able to contain maximum 14 pods.
3. Water container Here you pour the water that the machine will then boil to produce coffee.
5. Drip grids Element where you place the cup while the coffee is poured. Any spill will fall in the drip tray below.
Julia Beruffi WS 2020 / 21 or SS 2021
WUP 2020 / 21 Drawing 3D CAD 1 and 2 Technical views with measures
15,5 cm
17 cm
19 cm
27 cm
7,7 cm 8 cm
7 cm
12 cm
9 cm
30 cm
8,5 cm
14 cm
7,5 cm
14 cm
5,5 cm
16,5 cm
7,5 cm
Julia Beruffi WS 2020 / 21 or SS 2021
WUP 2020 / 21 Drawing 3D CAD 1 and 2 Elements and the drip drawer
Extraction of the drip drawer
The image shows the extraction of the drip drawer with the drip grid and the tray and of the view of the inner structure. You need to open it when you want to remove the used capsules, to make easier the extraction for the user there is a little flap on the bottom of the drawer.
Julia Beruffi WS 2020 / 21 or SS 2021
WUP 2020 / 21 Drawing 3D CAD 1 and 2 Detailed renderings and exploded diagram
Here is showed the hidden part where the drip drawer is placed, the hole is linked to the one in which the capsule is inserted and from there it goes in the tray.
It is pirced by six holes on each lateral view and there are two buttons: the green one starts to preapare the coffe and in red the one that turn on and off the machine.
The water container has a flap in order to be easily reachable by the user, while on the bottom it has a little spring that allows it to be stuck in that position.
Here you can see the two logos of the companies that designed the machine, Nespresso and De Longhi, located on the outer part of the drip drawer.
Julia Beruffi WS 2020 / 21 or SS 2021
WUP 2020 / 21 Drawing 3D CAD 1 and 2 How does it work
On the bottom you can see the explenation of how to insert a capsule inside the machne. The lever should be open and the capsule is inside you have to turn it down in order to pierce the paper of the pod. The capsule will then fall inside the tray in the drip drawer (see image on the left), when it is full you should remove them.
How to insert and remove capsules
Julia Beruffi WS 2020 / 21 or SS 2021
WUP 2020 / 21 Drawing 3D CAD 1 and 2 Mockup
Julia Beruffi WS 2020 / 21 or SS 2021