Bale Inspection Conveyors

Bunting ® offers Inspection Conveyors with Metal Detection for baled recyclable materials to use either as an independent stand-alone system or as the infeed conveyor to the shredder line. Your bales of post-consumer carpet, plastic bottles, milk jugs, plastic film, clothing or fiber can be inspected to determine if there is scrap metal, aluminum cans or other metal objects enclosed that could damage your shredder or contaminate the product stream.

1.Bales are placed on the infeed portion of the conveyor against optional backstops. 2.Bales then run through a tunnel-style Metal Detector sized perfectly to fit your bales. 3.Using sensitive triple coil technology, the Metal

Detector identifies any metal contamination within the bale itself and then double-checks it before conveying the bale out to be down loaded or feed directly onto an inclined Shredder Feeder Conveyor. 4.The inspection conveyor can also mark the contaminated bales making them easily identifiable to do further inspection.

• Heavy duty channel frame construction • Optional back stop for bale loading • Conveyor frames for 36” - 72” wide belts • Belt speeds between 20 - 40 fpm • Optional Metal Detector on separate

isolation support