Grinder Feeder Conveyors for Shredders and Grinders

• Designed for rugged applications that handle between 3600 - 9000 kg/hr (8,000 - 20,000 lbs/hr) - including whole bales, heavy purgings or bulk municipal recycling. • Typically constructed of formed 3/16” mild steel on

300mm-375mm (12” - 15”) channel iron frames, 4-ply belts with beefy cleats, UHMW skirting, 250-300mm (10” - 12”) pulleys and large drives with large D-coil Metal Detectors before the Shredder.

• Designed for 900 kg - 4,500 kg /hr (2,000 - 10,000 lbs/hr) of shredded material. • Fabricated from formed 12 gauge or formed 3/16” steel. • Built with 150mm - 250mm (6” - 10”) diameter pulleys, heavier

cleated cross-rigid flexwall belts and flared in-feed hoppers to match up to the Shredder discharge opening. • Available with optional equipment to purify the regrind, including “under the belt plate” or Tunnel-Style Metal Detectors with automatic discharge flip gates or magnetic

CrossBelt Separation. Conveyors mounted above the inclines with or without a Rare Earth Discharge Pulley.

• Used for hand-feed systems of either scrap parts or stringers

for in-house beside the machine grinder recycling. • Constructed of a fabricated 12-gauge steel frame, smaller drives, under the belt plate S-Coil Metal Detector and 75mm - 100mm (3” - 4”) pulleys with inexpensive smooth or ruff-topped belts.