H- Yu* Ir**MArroN o

All inquiries regarding NE\U7 PRODUCTS, New Literature or booklets and other items mentioned in this section should be addressed to THE CALIFORNIA LUMBER MERCHANT, Room 508, 1O8 West 6th St., Los Angeles 14. Your inquiries will be promptly forwarded bv us to the manufacturer or distributor. who will then'answer your inquiries direct.

prevent turning of carriage bolt in any operation. Prongs are deeply embedded in the lvood. These Ace fasteners are easily and quickly installed by using an angle hand allen rvrench, straight power type allen lvrench, or a power spanner lvrench. Ace Krvik Nuts and Torque Washers are used in pallets, pallet bins, skids, crates, boxes, trusses and many other industrial rvood items or composition fabrication. These are lor,v cost, high speed, greater strength ancl of equalizing design. Engr. Bulletin No. 508 available'upon request.

Folding Steel Legs Moking Portoble Sqwhorses dnd Tobles

TOOL HOITSTER, a ne\\' idea in tool holding for mechanics, honre n,orkegs, farnrers, in iact anyone rvho uses tools. It has been field-tested for five years and has 1>roven to be the best method for keeping tools at hand. It eliminates torn pockets and keeps tocils, flashlights, etc., from dangling loosely at the knee. This handy l.rolster clips on to belt, pocket or nail apron. The tools flip in and out o[ the holster u'ith the greatest of ease l ith only one h:rrtrl motion, acting as a third hand, leaving ltoth hands free for more efficient ancl safer u'ork. The holster is piated, patented and fully grrarar.rteed. lt is macle to hold ail types of hammers-tinsnilrs, u,renches, hatches, hammer tackers, garden tools and flashlights. Retails for only $1. Manufactured by-\TANISH I'I{OI)IJCTS, 1810 S. Ailport St., Chicago 8, Il1.

Weldon Folding Steel l-egs are designed and engineered to produce a reciprocal gripping lever action on a standard 2"x1" r,vhen legs are opened or spread at the bottom (as indicated in the photographic illustration). The legs are fabricated lrom l/8" angle iron rvith all moving parts riveted. They are reported capable of supporting frorn 500 lbs. to 2,000 lbs. in pairs, depending on their height. Available in pairs, standard Weldon Folding Steel Legs are manufactured in 1,4", 25", 3A', 36", 4Z', and 48" heights. Special sizes can be oroduced to specifications.

These nen'ACE KWIK NUTS are a combination nutand-n'asher fastener specially designed for high speed industrial l'ood applications. Only one drilling operation. No counterboring and rveakening of boards. Positive locking devicespanner notchesand allen sockets. ACE TORQUE WASHERS are designed ancl constructed to

The upper "gripper-clarv" portion of the Weldon Folding Steel Legs is engineered for "biting" into standarcl 2x4 lumber. Tl.ris makes the legs adaptable to carpenters' salhorses, painters' and decorators' scaffolding, work benches, drafting tables, boat repair scaffolding, outboard motor racks, tables, etc.

The advantages claimed for Weldon Folding Steel Legs are that they are easily, quickly applied or removed, making the ecluipment rvhich they forrn cornpletely portaltle; completely stable rvhen applied to2x4. The "gripper-clau's" rvhich constitute the upper portion of the Weldon Folding Steel Legs have protruding teeth on both sides rvhich converg'e on the piece of r,vood placed betl,veen them rvl.ren legs are opened at the bottom ; equipped tvith alignment flanges which maintain accurate positioning of wood in horizontal and vertical relationship to legs.

For details and literature: Weldon Products, 1451 East Nine l\Iile Road, Hazel Park (Detroit), Michigan.

New'Fin-lrim' Cqsemenl by Ceco

A new exclusive aluminum "integral fin-trim" residence casement has just been introduced by Ceco Steel Products Corporation. Installation costs are less than for any other r,vindow, according to the manufacturer, because (1) there are no fins or outside trim to attach, and (.2) rongh openings are easy to figure, rvith no complicated mathematics.