1 minute read

Hey! Dontl neglect the BACK DOORI

More people ENIER the Bock Door thon ony olher.

So. choose o hondsome bock door design for odded soles feotures. No need for mixing interior FLUSH ond exterior PANET doors to get "holf-gloss" designs. Visodor offers numerous possibilities, o few of which ore illustroted here.

Culowoy view of instolled VISADOn LIGHT reveolr b.sufy, strength, ond quolity of VISADOR hordwood noulding. Preci:ion milres ore permonenlly held iogether by specicl ioint-ndili. not iuit ordinory slaples. Gloss ir beddcd In full t/2-inch of <oulking compound for wcterproof fit6njl is CENTERED in door by IDENT|CAL holves of fwo-piecc moulding. These feolures ond mony more show why you ger MORE PERFECTION, DOOR-AFTER-DOOR in VISADOR quolity door lighfs ond louvers, Prices ore tnore thqn competitivo with other fiurh doq gloring methods!

species. When composed of more than one piece, the face is matched at the joints to avoid sharp contrasts in color and grain. A few small burls, occasional pin knots, and slight color streaks or spots are permitted.

Sound grade is intended for smooth paint finishes. The face is free of open defects, thus offering a sound, smooth surface. The veneer is not matched for grain or color. ft may contain such natural characteristics as mineral streaks, saprvood and sound tight knots up to fu-inch in average diameter.

Utility grade, designed for use where appearance is not an important factor, may contain various natural characteristics such as knot holes up to fu-inch average diameter and splits or open joints up to 3/I6-inch. The latter, ho.rvever, must not extend half the length of a panel.

Backing grade is recommended for uses where appearance is not a consideration. It may contain a number of natural characteristics not allowed in the higher grades. Mineral streaks, stain and discolorations as well as knots, bored holes and other characteristics, may be present provided they do not seriously impair the strength or serviceability of the panel. Knot holes are limited and no rot or doze is pennitted in the grade.

Custom grade embraces the most luxurious of hardwood plyu'ood. It is specially selected on the basis of specifications agreed upon by the buyer and the seller. These may include, for example, specially matched panels for architectural useb.

E,leven standard thicknesses ranging lrom l(-inch to 1 inch are listed in the nerv specifications. A plus or minus

This article is from: