wt,.} ffi#*

Outlet BoxCoverLine

RAB Electric has added to its outlet box cover line a CSI heavyduty die cast switch cover to be used with all standard switches or singlegang outlet boxes. CS2 is a new double-gang combination cover that accommodates a switch and a duplex receptacle. Both models are packaged with weatherseal gasket, mounting screws and a recessed switch adaptor.

For complete weatherproof closure, the CRI (single-gang) or

CR2 (two-gang) aluminum blank cover fits all standard weatherproof outlet boxes. It also comes packaged with mounting screws and weatherseal gasket.

CO2 is a new double-gang outlet cover with four weatherproof receptacles. All covers are available in silver baked-enamel and come packaged bulk or carded.

Shingles Switch to Metric

Celotex Roofing Products Division has introduced a new line of metric shingles, with an Underwriter Laboratories Class "A" label for fire and wind resistance.

The "Big D" line of Fiber Glass Asphalt Shingles /20 and /25, Rustic Shakes Shingles and its FRS Fiber Glass Asphalt Fungus Resistant Shingles has initial availability in the West.

Metric shingles reportedly can reduce labor time and installation costs.

Lok Pfeiffer Skylights is introducing a Skybubble@ Energy-Saver Model E line of residential install-ityourself skylights.

In a size range from 20" x 36" to

52" x 52", they feature bronze or mill finish aluminum frames, and energy-efficient sealed acrylic double domes in bronze-over-clear or clearover-clear colors. They conform to the Uniform Building Code.

Small Home Heating

The Cedar, new from Sweet Home Stove Works, Inc., is designed to give the small home owner economy and efficiency in solid fuel heating.

Featuring the same design and air flow patterns as a larger model, it has lower installation costs and will heat up to 1000 sq. ft. burning 153/r" fuel.

It has a 6" flue and sits on a 30" x 36" hearth pad. The stove has been tested and approved by Gas Appliance Laboratory. The I.C.B.O. listing is in the process.

Free Reader Service

For more inlormation on New Products and New Literature, write fhe Merchant Magazine, 4500 Campus Dr., Suite 480, Newport Beach, Ca. 92660. Please mention issue date and page number so we can Process your request faster! Many thanks!

Double Duty Saw

A band saw which provides the advantages of a circular saw bench with a band saw blade doing the work in place of a circular blade is designed and manufactured in Australia by Ripley Machines.

A different type of main frame and ball bearing guides provide versatili ty. It offers a vertical cut as well as straight line cutting. The development of this concept, together with greater table area, won an Australian Design Award in 1978.

Instead of being supported bY a vertical pillar, the top frame is held diagonally, allowing 36" free space between the blade and the frame. This advantage is increased by a sliding table.

The band saw will handle panels uP to 24" wide and will cross cut any length of 15" material. The unit is powered by a rubber mounted, fully enclosed 1.5 hp three phase or single phase electric motor.

A single hinged guard gives access for blade changes and adjustment. A direct reading tension scale for any blade from 0.125" to 0.75" in thickness is built into the machine.