Files for the Workshop Special Files
Fitter’s file
Specially developed for general use on a broad range of materials. They are effective even on synthetic resin fillers and wood with nails. Order No. PF 611
Length [mm]
Length [inch]
250
10
PFERD files for deburring, chamfering, rough work and finishing of soft metals.
Superb for tough work, deburring and for dressing brazed and soldered joints. The different tooth patterns on the front and back side make these files particularly versatile.
Rectangular file with tang and ergonomic handle, milled teeth, angular tooth pattern with chip breaker on front side, radial teeth on back, smooth edges.
Cuts
EAN 4007220
Cross-section [mm]
Incl. handle
Radial 1/straight 2
542309
24,0 x 6,2
FH 4/1
5
2,900
The cutting geometry has been specially adapted to the processing requirements of soft, lubricating materials to prevent the files from clogging.
Saves labour and produces a good surface.
Application: ■■Surface work ■■Deburring ■■Shaping and refining of rectangular geometries
Ordering example: EAN 4007220005798 1612 w 250 mm C0
Files for aluminium Hand
Rectangular file, tanged, and cut on three sides, one edge uncut; similar to DIN 7261, shape A; available in special cut 0.
Order No. 1612 w 1612 w
Length [mm]
Length [inch]
250 300
10 12
Cuts
EAN 4007220
Cross-section [mm]
Matching handle
0 0
005798 005804
25,0 x 6,0 30,0 x 6,5
FH 4/1 FH 5/1
10 5
2,960 2,800
10 5
2,470 2,175
Files for aluminium Half round
Application: ■■Surface work ■■Deburring ■■Shaping and refining of rectangular breakthroughs ■■Filing of half-round shapes
Provide outstanding stock removal due to the special proprietary spiral cut on the half-round side. Half round file, tanged, cut on two sides; similar to DIN 7261, shape E; available in cut 0 (special cut). Order No. 1652 w 1652 w
12 I 201
Length [mm]
Length [inch]
250 300
10 12
Ordering example: EAN 4007220006375 1652 w 250 mm C0
Cuts
EAN 4007220
Cross-section [mm]
Matching handle
0 0
006375 006399
25,0 x 7,0 30,0 x 8,5
FH 4/1 FH 5/1