TM 9-803 23 SECOND ECHELON PREVENTIVE MAINTENANCE MAINTENANCE
directions, and determine if turning stops hold tires
liesa Ml'
Ise Ml'
clear of all parts of vehicle in these positions. Examine axle for loose turn stops.
91
91
Lights. Determine that switches for head, tail, instrument, and blackout lights operate properly. Operate stop light by depressing brake pedal. Test foot switch, noting whether beam is controlled for high and low positions. Inspect all lights; these must be clean, securely mounted, and in good condition; lenses must not be broken, cracked, or discolored; reflectors must not be discolored; blackout lights must be in good condition with shield in proper position.
91
ADJUST. Adjust and aim headlight beams.
92
92
Safety Reflectors. Safety reflectors must be present, clean, and secure. Replace if cracked or broken.
93
93
Front Bumper and Grille. Front bumper and grille must be present, in good condition, and securely mounted.
94
94
Hood, Hinges and Fasteners. Examine hood for alinement and secure mounting when fastened; see that. fasteners are present, secure, undamaged, arid not excessively worn or bent. Lubricate hinges and fasteners lightly. See that radio noise bond straps from hood to dash and grille are secure.
95
95
Front Fenders. Inspect front fenders for good condition and secure mounting.
96
96
Body Hardware. Inspect body of vehicle according to following standards: Hardware should operate properly and be adequately lubricated; top should be clean, having no holes or tears, and all grommets must be present and in good condition. Windshield should be free from cracks or discoloration; windshield frame and holddown hooks at hood should be in good condition. Seats and upholstery should be clean and undamaged; safety straps should be present and in place; body handles should be present, secure, and undamaged; floor drain plugs (2) should be present, and in good condition.
98
98
Circuit Breaker, Terminal Blocks. or Boxes. Inspect points of thermal circuit breaker (30 amperes, located on main light switch) for pitting or corrosion. Be sure all radio noise suppression bond straps and capacitor on radio terminal box (if so equipped) are in good condition and secure.
101
101
Rear Bumpers and Pintle Hook. Latch and Lock Pin. Inspect rear bumpers and pintle hook to see if they are 65