The Dos And Don’ts Of Wet Tile Cutting With Diamond Blades
Metal Cutting Tools Manufacturer In India Since 1974
What Is A Diamond Blade? Diamond blade manufacturing embraces stainless steel metal along with diamond chips. The diamond chips are lined together to the edge of the blade. If you want to get a cleaner cut, you should use a diamond blade with exposed diamond fragments.
The diamond fragments help improve the precision of the cut and reduce dust. While cutting tiles, the diamond blade will provide a precise and clean cut.
Metal Cutting Tools Manufacturer In India Since 1974
Dos: For Cutting Wet Tiles With Diamond Blade The technicians should inspect the diamond blade for damages or cracks. If the blades are damaged, you should not use them. You should go through the user guide and use the pulley of recommended sizes and shapes. Also, consider the speed mentioned within the user guide.
Metal Cutting Tools Manufacturer In India Since 1974
For Enhancing The Operation Speed Of The Diamond Blade To Cut Wet Tiles: The shaft bearing should be free to move at a faster speed. Use a V-belt to tighten the pulleys to prevent wear and tear of the diamond blades. Adjust the lead-off as it allows the blade to move in a straight direction. Operate the diamond blade with complete safety. Use all the safety gears while cutting the wet tiles with the diamond blade. Metal Cutting Tools Manufacturer In India Since 1974
Don’ts: For Wet Tile Cutting With Diamond Blade You must not use the diamond blade without proper inspection. Damaged blades can lead to accidents. It can also break the material (tile). Avoid remounting the used diamond blade. Used blades do not offer high efficiency and precision. Avoid mounting the flanges on the dirty and unclean surfaces. It will interrupt the smooth motion of the blades.
Metal Cutting Tools Manufacturer In India Since 1974
About us BIPICO, an ISO 9001:2015 company is established in November – 1974 and is proud of its more than four decades journey as a Hacksaw Blade manufacturing company, BIPICO has grown into a major cutting tools manufacturer and exporter with a strong brand image in India and in International markets.
Metal Cutting Tools Manufacturer In India Since 1974
ADDRESS
PHONE
506-A, Lotus House, 5th Floor, 33, Sir V. Thackersey Road,
+ 91- 22- 22003881
mumbai@bipicoexp.com
Mumbai – 400 020 (INDIA)
CONTACT
Metal Cutting Tools Manufacturer In India Since 1974
US