Beslagsmix samlingsbroschyr ug by Beslagsmix AB

Samlingsbroschyr

110° CST 21

täckbricka heltäckande Ref. No.

514.000.72.0015 plast, nickel (kan beställas med företagslogo)

Ref. No.

146.622.50.0015

125 st/fp.

täckbricka halvtäckande Ref. No.

514.000.71.0015 plast, nickel (kan beställas med företagslogo)

Ref. No.

146.622.50.0815

125 st/fp.

täckbricka innanförliggande 100° Ref. No.

514.000.71.0015 plast, nickel (kan beställas med företagslogo)

Ref. No.

146.604.50.1515

125 st/fp.

Twin NT CST 21

110°

• Öppningsvinkel 110°

DBE Inborrningsmått

DBE

4 5 6 7 20

18 17

0 0

max. max.

16 15

Dörrtjocklek

Fog

Täckning

Monteringsplattans tjocklek

2 2

e 13

DBE

4 4

DBE

4 5 6

10 9

max.

4 4

6 5

8 7

c x2

DBE c

min.

DBE

4 5 6 0

4 4

1 4

DBE c

125° CST 29

Täckbricka Heltäckande Ref. No.

514.000.72.0015 plast, nickel (kan beställas med företagslogo)

Ref. No.

146.629.50.0015

125 st/fp

Täckbricka Halvtäckande Ref. No.

514.000.71.0015 plast, nickel (kan beställas med företagslogo)

Ref. No.

146.629.50.0815

125 st/fp

CST 29 125°

• Öppningsvinkel 125°

DBE Inborrningsmått DBE

4 5 6 0

19 0

18 17

max.

Fog

Täckning

Monteringsplattans tjocklek

4 4

e 13

Dörrtjocklek

16 15

DBE

c x2

c DBE

4 5 6 9

max.

2 2

8 2

4 4

6 4

DBE

170째 CST 65 Helt채ckande

Ref. No.

146.765.65.0015

50 st/fp

Halvt채ckande

Ref. No.

146.765.65.0815

50 st/fp

Twin NT

CST 65 170°

• Öppningsvinkel 170°

DBE Inborrningsmått DBE

4 5 6 7 8

Dörrtjocklek

Fog

Täckning

Monteringsplattans tjocklek

21 20

18 17

0 0

max.

16 15

2 2

4 4

DBE

4 4

b DBE

4 5 6 7 8 13 12

10 9

0 0

max.

8 7

c x2

2 2

2 2 4 4

4 4

DBE

0,0 0,0 0,0 0,0

0,0 0,0 2,5 1,0

5,5 5,0 3,3 2,1

8,5 6,5 4,1 3,2 c

95° CST 05/45/3

Täckbricka Hörnskåp 45° Ref. No.

514.000.71.0015 plast, nickel (kan beställas med företagslogo)

Ref. No.

146.705.50.0315

125 st/fp

Twin NT CST 05/45/3

95°

• Öppningsvinkel 95° • 45° Hörnskåp

DBE Inborrningsmått b

Dörrtjocklek

Fog

Monteringsplattans tjocklek

DBE

4 5 6 2 4

DBE c

95° CST 05/90/4

Täckbricka diskbänksgångjärn Ref. No.

514.000.71.0015 plast, nickel (kan beställas med företagslogo)

Ref. No.

146.705.50.9615

125 st/fp

Twin NT CST 05/90/4 95°

• Öppningsvinkel 95° • Diskbänksgångjärn

DBE Inborrningsmått b

Dörrtjocklek

Fog

DBE

Monteringsplattans tjocklek 0 mm

Monteringsplattans tjocklek 2 mm b

Monteringsplattans tjocklek 4 mm

DBE c

110°

ipressning

CS 21

skruvning

täckbricka heltäckande Ref. No.

514.000.02.0062 plast, svart Ref. No.

514.300.02.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.322.53.0015

Ref. No. 250 st/fp

146.322.54.0015

250 st/fp

täckbricka halvtäckande Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.322.53.0815

Ref. No. 250 st/fp

146.322.54.0815

250 st/fp

täckbricka 100° innanförliggande Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.304.55.1515

250 st/fp

146.304.56.1515

250 st/fp

CS 21

110°

• Öppningsvinkel 110°

DBE Inborrningsmått

DBE

4 5 6 7 0

20 0

19 0

18 17

max.

Fog

Täckning

Monteringsplattans tjocklek

2 DBE

f c x2

DBE

4 5 6

10 9

max.

4 4

6 5

2 2

8 7

4 4

e 13

Dörrtjocklek

2 2

DBE c

min.

DBE

4 5 6 0

4 4

1 4

f DBE c

125°

ipressning

CS 29

skruvning

täckbricka heltäckande Ref. No.

514.000.02.0062 plast, svart Ref. No.

514.300.02.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.329.55.0015

Ref. No. 250 st/fp

146.329.56.0015

250 st/fp

täckbricka halvtäckande Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.329.55.0815

Ref. No. 250 st/fp

146.329.56.0815

250 st/fp

CS 29

125°

• Öppningsvinkel 125°

DBE Inborrningsmått DBE

4 5 6 0

19 0

18 17

max.

Dörrtjocklek

Fog

Täckning

Monteringsplattans tjocklek

4 4

e 13

2 2

DBE

c x2

c DBE

4 5 6 9

max.

2 2

8 2

4 4

6 4

DBE c

170째

ipressning

CS 62

skruvning

helt채ckande

Ref. No.

146.765.53.0015

Ref. No. 125 st/fp

146.662.54.0015

125 st/fp

halvt채ckande

Ref. No.

146.765.53.0815

Ref. No. 125 st/fp

146.762.54.0815

125 st/fp

CS 62 170°

• Öppningsvinkel 170°

DBE Inborrningsmått DBE

4 5 6 7

Dörrtjocklek

Fog

Täckning

Monteringsplattans tjocklek

20 0

19 0

18 17

max.

4 4

e 13

2 2

16 15

DBE

b DBE

4 5 6 7

11 0

10 9

max. e

2 2

8 7

c x2

4 4

6 4

DBE

0,0 0,0 0,0 0,0

0,0 0,0 2,5 1,0

5,5 5,0 3,3 2,1

8,5 6,5 4,1 3,2 c

ipressning

CS 05/30/2

95°

skruvning

täckbricka hörnskåp 30° Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.405.53.0215

Ref. No. 125 st/fp

146.405.54.0215

125 st/fp

CS 05/30/2

95°

• Öppningsvinkel 95° • 30° hörnskåp

DBE Inborrningsmått b Dörrtjocklek c

Fog

Täckning

Monteringsplattans tjocklek

DBE

4 5 6 0

15 0

14 13

max.

2 2

12 x = 35 mm med monteringsplatta 37/0 mm 34 mm med monteringsplatta 37/2 mm 33 mm med monteringsplatta 37/4 mm

4 4

10 4

DBE c

95°

ipressning

CS 05/45/3

skruvning

täckbricka hörnskåp 45° Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.405.53.0315

Ref. No. 125 st/fp

146.405.54.0315

125 st/fp

CS 05/45/3

95°

• Öppningsvinkel 95° • 45° hörnskåp

DBE Inborrningsmått b

Dörrtjocklek

Fog

Monteringsplattans tjocklek

DBE

f c b

DBE

4 5 6 2 4

DBE c

95°

ipressning

CS 05/90/4

skruvning

täckbricka Diskbänksgångjärn Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.405.53.9615

Ref. No. 125 st/fp

146.405.54.9615

125 st/fp

CS 05/90/4

95°

• Öppningsvinkel 95° • Diskbänksgångjärn

DBE Inborrningsmått b

Dörrtjocklek

Fog

DBE

c Monteringsplattans tjocklek 0 mm

Monteringsplattans tjocklek 2 mm

Monteringsplattans tjocklek 4 mm

DBE c

CS PCC

skruvning

täckbricka

Innerhörngångjärn

Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.700.01.0015

125 st/fp

CS PCC

• Innerhörngångjärn • Dörrtjocklek 16-22 mm

Monteringsplattans tjocklek 4 mm Monteringsplattans tjocklek 2 mm Monteringsplattans tjocklek 0 mm

Dörrtjocklek (b)

Avstånd (a)*

Monteringsplattans tjocklek (f)

*Monteringsplatta 37mm hålrad

95° CS 17

skruvning

Minigångjärn 95°

täckbricka

heltäckande Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.317.61.0015

250 st/fp

täckbricka halvtäckande Ref. No.

514.000.02.0062 plast, svart Ref. No.

514.300.02.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.417.61.0815

250 st/fp

täckbricka innanförliggande Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.417.61.1515

250 st/fp

CS 17

95°

DBE Inborrningsmått b Dörrtjocklek

DBE

3 4 5 6 2

17 2

max.

16 15

Fog

Täckning

Monteringsplattans tjocklek

4 4

e 13

DBE

11 0

10 9

max. e

4 4

6 5

2 2

8 7

c x2

3 4 5 6

DBE

min.

DBE

2 3

4 4

95° CS 17 GL

2 m 6 m

glastjocklek 4 – 6 mm

För glasdörrar

Minigångjärn 95°

täckbricka

heltäckande Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.017.93.0084

250 st/fp

täckbricka halvtäckande Ref. No.

514.000.02.0062 plast, svart Ref. No.

514.300.02.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.117.93.0884

250 st/fp

täckbricka innanförliggande Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

146.117.93.1584

250 st/fp

CS 17 GL

95째

DBE Inborrningsm책tt

DBE

4 5 6

max.

2 4

DBE

4 5 6

c x2

0 0

10 0

2 2

8 max.

Monteringsplattans tjocklek

DBE

e 13

T채ckning

4 4

Fog

17 15

4 4

6 4

3 4 5 6

DBE

min.

0 1

4 4

2 4

meplamat 2500 För borrning och montering

Tillbehör som ingår: • • • • •

1 st Borr 35 mm 2 st Borr 8 mm 2 st Borr 5 mm 2 st Stopp 1 st Matris

Best. Nr./Ref. No. 490.402.00.0650

Tillval: Förlängningslinjal

Extra stopp

Best. Nr./Ref. No. 949.980.07.5012

höger

Best. Nr./Ref. No. 949.980.07.5112

Best. Nr./Ref. No. 949.200.21.0000

MADE by MEPLA D

MÖBELBESCHLÄGE

73 100 204

9001

ISO

vänster

M EPLA

FURNITURE FITTINGS

Dekorplatta

plast

125 st/fp

359.000.01.10 16 nickel, matt

359.000.01.16 16 nickel, matt

359.000.01.10 19 nickel, struktur

359.000.01.16 19 nickel, struktur

CS Monteringsplattor

för träskruv

Ref. No. 314.393.81

250 st

Tjocklek

00 02 04

15 nickel

Med förmonterad systemskruv för 37 mm hålrad

Ref. No. 318.393.81

250 st

Tjocklek

00 02 04

15 nickel

Med förmonterad systemskruv för 28 mm hålrad

Ref. No. 318.390.81

250 st

Tjocklek

00 02 04

15 nickel

Med förmonterad träskruv och expanderande 5 mm tapp för 37 mm hålrad.

Ref. No. 319.393.76

250 st

Tjocklek

00 02 04

15 nickel

CS Monteringsplattor

➀

➁

➂

för träskruv

Tjocklek

00 02 04 06 08 Fp

Ref. No. 314.493.71.0015 314.493.71.0215 314.493.71.0415 314.493.71.0615 314.493.71.0815 250 st

Med förmonterad systemskruv för 37 mm hålrad

Tjocklek

00 02 04 06 08 Fp

Ref. No. 318.493.71.0015 318.493.71.0215 318.493.71.0415 318.493.71.0615 318.493.71.0815 250 st

CS Monteringsplattor

För träskruv

Ref. No. 315.393.55

250 st

Tjocklek

00 02 04 08 18

15 nickel

För systemskruv

Ref. No. 317.393.56 6.3 x 13 mm

250 st Tjocklek

00 02 04 08 18

15 nickel

CS Monteringsplattor

➀

➁

➂

Renoveringsplatta

Ref. No. 346.290.88

250 st

Tjocklek

00 02 04

15 nickel plated

Renoveringsplatta med excenterjustering

Tjocklek

00 02 04

Ref. No. 346.290.91.0015 346.290.91.0215 346.290.91.0415

250 st

270° SSP 70

skruvning

täckbricka heltäckande Ref. No.

514.000.02.0062 plast, svart Ref. No.

514.300.02.0015 stål, nickel kan beställas med företagslogo

Ref. No.

T17 412.770.04.0015 T20 412.770.00.0015

125 st

halvtäckande

Ref. No.

T17 412.770.04.0815 T20 412.770.00.0815

125 st

SSP 70 270°

• Öppningsvinkel 270°

Täckning

Monteringsplattans tjocklek

Urfräsning sida

X X

7 0

16 15

14 13

10 9 C

Dörrtjocklek

7 mm

42 mm

21 mm

T17 15 –18 mm

max.

10 mm 48 mm

24 mm

T20 15 –21 mm

7 6

4 f

7 0

8 7

6 5 4 A

Dörrtjocklek

15 mm 42 mm

21 mm

T17 15 –18 mm

18 mm 48 mm

24 mm

T20 15 –21 mm

3 2

1 e

270° SSP 73

skruvning

täckbricka heltäckande Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 stål, nickel kan beställas med företagslogo

Ref. No.

412.770.08.0015

125 st

halvtäckande

Ref. No.

412.770.08.0815

125 st

SSP 73 270°

• Öppningsvinkel 270°

Täckning

Monteringsplattans tjocklek

Urfräsning sida

X 16

0 0

15 14

0 2

13 4

0 2

10 mm 48 mm 24,5 mm

Dörrtjocklek 14–21 mm

6 5 4 3 2 1 0

0 0 2

4 3 D

10 mm 48 mm 24,5 mm

Dörrtjocklek 14–21 mm

1 e

DBE

0 2

2 4

8 max.

0 2

9 C

0 2

10 A

6 5 4 3 2 1 0

0 2

0 2 f c

SSP 80

180°

skruvning

täckbricka Falsgångjärn Ref. No.

514.000.22.0062 plast, svart Ref. No.

514.300.22.0015 Ref. No.

414.780.80.00 _ _ Ytbehandling:

stål, nickel

Ref. No. 125 st

414.780.82.00 _ _ Ytbehandling:

nickel

antik

125 st

kan beställas med företagslogo

SSP 80 180°

• Öppningsvinkel 180°

SSP Monteringsplattor

Med förmonterad systemskruv för 37 mm hålrad 250 st

Ref. No. 318.393.52

Tjocklek

00 02 04

15 nickel

Med förmonterad systemskruv för 28 mm hålrad 28

250 st

Ref. No. 318.390.52

Tjocklek

00 02 04

15 nickel

SSP Monteringsplattor

➀

➂

➁

För träskruv 250 st

Ref. No. 314.390.52

Tjocklek

00 02 04

15 nickel

För träskruv

Ref. No. 315.393.66

250 st

Tjocklek

00 02 04 08 18

15 nickel

För systemskruv

Ref. No. 317.393.66

250 st

Tjocklek

00 02 04 08 18

15 nickel

Heltäckande

Ref. No. 146.617.04.0015 Fp

Täckbricka

Öppningsvinkel 95°

Plast svart Stål nickel

Halvtäckande

250 st

Ref. No. 514.000.22.0062 Fp 1000 st 514.300.22.0015 Fp 1000 st

Ref. No. 146.717.04.0815 Fp

Täckbricka

Plast svart Stål nickel

Innanförliggande

250 st

Ref. No. 514.000.02.0062 Fp 1000 st 514.300.02.0015 Fp 1000 st

Ref. No. 146.717.04.1515 Fp

Täckbricka

Plast svart Stål nickel

250 st

Ref. No. 514.000.22.0062 Fp 1000 st 514.300.22.0015 Fp 1000 st

CS 17 AL

95°

Gångjärn för aluminiumram Halvtäckande

Monteringsplattans tjocklek (f)

Innanförliggande

Monteringsplattans tjocklek (f)

Fog min.

Täckning max.

Heltäckande

Monteringsplattans tjocklek (f)

Ref. No. 298.707.88.0015 Fp

Öppningsvinkel 128°

Täckbricka

Stål nickel

50 st

514.300.22.0015 Fp 1000 st

Adapter stål

Ref. No. 621.300.20.5017 Fp 50 st

CS 07 Mirro

128°

Gångjärn för glasdörr med limmad adapter

X = 37 mm med monteringsplatta för 28 mm hålrad X = 46 - 48 mm med monteringsplatta för 37 mm hålrad

z = Täckning e + 7 mm med monteringsplatta (f), tjocklek 00 z = Täckning e + 9 mm med monteringsplatta (f), tjocklek 02 z = Täckning e + 11 mm med monteringsplatta (f), tjocklek 04

X = + 9 mm

3 4

OBS! Kunden ansvarar för montering och limmning av adaptern

Soft-close® CST

• För TWIN gångjärn CST04, CST 05, CST 22 och CST 29

Soft-close® CS

• För gångjärn/skruvning CS04, CS 05, CS 22 och CS 29

Soft-close® F65

• För 170° gångjärn CST 65 und CS 65

Soft-close® Mirro

• För glasdörrsgångjärn

Softclose

Position för Soft-close® CST Möjlig position för Soft-close®

Soft-close® CST Adapter TWIN

Soft-close® dämpare TWIN

Ref. No. 924.200.41.0015

Ref. No. 924.012.50.0142

125 st

Soft-close® CS Adapter

Täckbricka för CS gångjärnsgryta

Ref. No. 924.200.40.0215

Ref. No. 514.300.20.0115

125 st

nickel

Aluminiumprofiler för glasdörrar

Måttanpassas efter önskemål (min. kvantitet)

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.

8701-030 8702-030 8701-836 8702-836 8701-831 8702-831 7031-030 7032-030 7031-836 7032-836 7031-831 7032-831 7031-020 7032-020 7031-038 7032-038 8701-020 8702-020 8701-038 8702-038

Antik brons diam. 35 mm Antik brons diam. 30 mm Antik tenn diam. 35 mm Antik tenn diam. 30 mm Antik mässing diam. 35 mm Antik mässing diam. 30 mm Antik brons cc 128 mm Antik brons cc 96 mm Antik tenn cc 128 mm Antik tenn cc 96 mm Antik mässing cc 128 mm Antik mässing cc 96 mm Mattborstat guld cc 128 mm Mattborstat guld cc 96 mm Mattborstat nickel cc 128 mm Mattborstat nickel cc 96 mm Mattborstat guld diam. 35 mm Mattborstat guld diam. 30 mm Mattborstat nickel diam. 35 mm Mattborstat nickel diam. 30 mm

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.

7251-038 7252-038 3940-831 3940-038 3940-836 8671-038 8672-038 8780-831 8780-836 7251-831 7252-831 7251-836 7252-836

Mattborstat nickel cc 128 mm Mattborstat nickel cc 96 mm Antik mässing cc 64 mm Mattborstat nickel cc 64 mm Antik tenn cc 64 mm Mattborstat nickel 34x22 mm Mattborstat nickel 31x20 mm Antik mässing 20x20 mm Antik tenn 20x20 mm Antik mässing cc 128 mm Antik mässing cc 96 mm Antik tenn cc 128 mm Antik tenn cc 96 mm

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.

W0001320 W0001192 9471.001 8645.061 3940-021 8721-021 7991-021 7161-021 7170-021 7132-021 7131-021

Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

naturelox. cc 320 mm naturelox. cc 192 mm naturelox. cc 192 mm lack cc 128 mm lack cc 64 mm lack diam. 18 mm lack cc 96 mm lack cc 96 mm lack cc 128 mm lack cc 96 mm lack cc 128 mm

Rostfritt mattborstat diam. 10 mm. 1. 2. 3. 4. 5.

2031-288 cc 288 mm 2031-192 cc 192 mm 2031-160 cc 160 mm 2031-128 cc 128 mm 2031-96 cc 96 mm

B책ghandtag Matt krom diam. 10 mm 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

1. 2. 3. 4. 5. 6.

4865-140 4864-140 4863-140 4862-140 4861-140 4860-140 4859-140 4800-140 8346-140 8346-140

cc cc cc cc cc cc cc cc cc cc

320 mm 288 mm 256 mm 224 mm 192 mm 160 mm 128 mm 96 mm 64 mm 32 mm

7880-032 2031-128-21 2031-96-21 83596 FB 83596 FB 83596 FB

Matt svart cc 128 mm Matt krom cc 128 mm diam. 10 mm Matt krom cc 96 mm diam. 10 mm Vitlack cc 96 mm diam. 8 mm Krom cc 96 mm diam. 8 mm Svart cc 96 mm diam. 8 mm

08-2265-19

2. 3. 4. 5. 6. 7.

17000-655-142 17000-544-142 17000-444-142 17000-344-142 17000-244-142 17000-188-142

Bygelhandtag Matt krom cc 596 mm. Finns i längderna cc 224, 346, 596, 796 och 996 mm. Diam 12 mm cc 595 mm cc 484 mm cc 384 mm cc 284 mm cc 184 mm cc 128 mm

Rostfritt utseende diam 12 mm, höjd 35 mm, fot diam. 10 mm

1. 2. 3. 4. 5. 6.

6155-04 6155-02 6155-07 6147-04 6147-07 5396-08

Mattborstat rostfritt cc 64 mm Blank krom cc 64 mm Antik mässing cc 64 mm Mattborstat rostfritt cc 96 mm Antik mässing cc 96 mm Antik mässing cc 96 mm

9861-002

2. 3. 4. 5. 6. 7. 8.

6800-144 12759-38 1096-140 6140-04 6559-144 8380-001 8697-001

Mattborstat nickel hål diam. 35 mm utv. 40 mm Mattborstat rostfritt diam. 28 mm Mattborstat rostfritt cc 128 mm Mattkrom cc 96 mm Mattborstat rostfritt cc 160 mm Mattborstat rostfritt cc 128 mm Aluminium lack cc 128 mm Matt nickel cc 128 mm

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.

TSC 3078 IRC 3174 8701-836 8702-831 8701-831 8702-836 8473-100 8473-900 7830-831 7830-836 7830-829 7830-100 7830-900

Antik järn cc 96 mm Antik järn cc 128 mm Antik tenn diam. 35 mm Antik mässing diam. 30 mm Antik mässing diam. 35 mm Antik tenn diam. 30 mm Blank guld diam. 25 mm Antik brons diam. 25 mm Antik mässing cc 96 mm Antik tenn cc 96 mm Antik silver cc 96 mm Blank guld cc 96 mm Antik brons cc 96 mm

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.

9352-96 9352-128 9352-160 1054-128 9211-96 9211-64 2020-160 2020-128 2020-96 9225-96 9223-64

Bok lack cc 96 mm Bok lack cc 128 mm Bok lack cc 160 mm Bok lack cc 128 mm Bok lack cc 96 mm Bok lack cc 64 mm Björk lack cc 160 mm Björk lack cc 128 mm Bok lack cc 96 mm Bok lack cc 96 mm bok lack cc 64 mm

Handtagen finns i flera träslag, bets och färger.

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

2215-96 2215-128 2145-128 2145-96 2148-128 2148-96 1023-128 1023-96 1023-64/16 1031-128 1031-96 1031-64

Ek lack cc 96 mm Björk lack cc 128 mm Björk lack cc 128 mm Björk lack cc 96 mm Björk lack cc 128 mm Bok lack cc 96 mm Bok lack cc 128 mm Bok lack cc 96 mm Bok lack cc 64 mm Bok lack cc 128 mm Bok lack cc 96 mm Bok lack cc 64 mm

Handtagen finns i flera träslag, bets och färger.

8696010 Twin halogenbelysning 3x20 W + trafo 60 W. Matt krom, total längd 925 mm. Kabellängd 1,8 meter

Distansring till halogenlampor för utanpåliggande montering. Blank krom Rostfritt Blank mässing Matt krom

Transformator 60 Watt för max 6 st 10 W halogenlampor. Kabellängd 1,9 meter

Halogenbelysning 12 V 1. 2. 3. 4.

8694910K2 8694910K7 8694910K3 8694910K5

10 10 10 10

W W W W

Blank krom Rostfri Blank mässing Matt krom

Samtliga inkl. 2 meter kabel, klarglas, 10 W lampa. Inbyggnadsmått diam. 57-58 mm, djup 17 mm.

Z 322 - 128 SSC matt krom 128 mm cc Z 322 - 128 BNI matt borstat 128 mm cc

TH 541 - 128 BNA matt borstat rostfritt 128 mm cc, 12 mm diam.

51614016004 matt borstat 160 mm cc

A612 - 128 DAN aluminium natureloxerat 128 mm cc A612 - 192 DAN aluminium natureloxerat 192 mm cc

TH180 - 128 BNA matt borstat rostfritt 128 mm cc TH180 - 192 BNA matt borstat rostfritt 192 mm cc TH180 - 224 BNA matt borstat rostfritt 224 mm cc TH180 - 320 BNA matt borstat rostfritt 320 mm cc

Z 765 - 128 BNI matt borstat 128 mm cc Z 765 - 128 SSC matt krom 128 mm cc Z 765 - 128 PC blank krom 128 mm cc

Z 8021 - 160 BNI matt borstat 160 mm cc Z 8021 - 160 SSC matt krom 160 mm cc

S 6311 - 20 BNI matt borstat diam. 20 mm Ă&#x2DC; UtsprĂĽng 28 mm

S 272 - 96 SSC matt krom 96 mm cc S 272 - 96 DBK matt svartlack 96 mm cc S 272 - 128 SSC matt krom 128 mm cc S 272 - 160 SSC matt krom 160 mm cc S 272 - 192 SSC matt krom 192 mm cc S 272 - 224 SSC matt krom 224 mm cc S 272 - 256 SSC matt krom 256 mm cc S 272 - 288 SSC matt krom 288 mm cc S 272 - 320 SSC matt krom 320 mm cc Diam 10 mm

S 271 - 96 SSC matt krom 96 mm cc S 271 - 96 PC blank krom 96 mm cc Diam 10 mm

S 271 - 128 SSC matt krom 128 mm cc S 271 - 128 PC blank krom 128 mm cc Diam 10 mm

CH 11 - 70 DAN aluminium natureloxerat 50 mm cc CH 11 - 70 APC aluminium polerat 50 mm cc L채ngd 70 mm CH 11 - 196 DAN aluminium natureloxerat 160 mm cc L채ngd 196 mm

S 305-96 BNI matt borstat 96 mm cc, tot längd 145 S 305-128 BNI matt borstat 128 mm cc, tot längd 188 S 305-184 BNI matt borstat 184 mm cc, tot längd 244 S 305-284 BNI matt borstat 284 mm cc, tot längd 344 S 305-384 BNI matt borstat 384 mm cc, tot längd 444 S 305-484 BNI matt borstat 484 mm cc, tot längd 544 S 305-595 BNI matt borstat 595 mm cc, tot längd 655

S 270 - 224 SSC matt krom 224 mm cc Diam. 12 mm S 270 - 346 SSC matt krom 346 mm cc Diam. 12 mm S 270 - 596 SSC matt krom 596 mm cc Diam. 12 mm

Sockelben Sockelben 500010 100 mm Sockelben 500015 150 mm Justerbart -10/+18 mm Sockelfäste 500051 90,5 x 78 mm För skruvning Sockelclips stål 520060

Klaffhållare Klaffhållare 3667.010 Duolift justerbar broms

Ben Ben 163 matt krom höjd 170 mm Fyrkant 25x25 mm rostfri fot justerbar Inkl. Fästbricka och pinnskruv

Sockelhörn Sockelhörn för 16 mm material Längder 1080 mm alt fix längd 149 mm Vit, svart, beige samt grå Finns även som skarvprofil

Lådmatta Lådmatta grafitgrå antiglid Fixmått alt. metervara bredd 1500 mm

Bordsben 1007 710 mm Bordsben justerbart inkl. fäste Höjd 710 mm diameter 50 mm Mattsvart, vitlack, blank krom, samt matt krom

Hjul Cross 120 mm aluminiumfärg Cross. 1.25 med broms, ledbart Cross. 4.40 obromsat, ledbart Bygghöjd 120 mm Belastning 300 kg/hjul

Garderobstång + Fäste Garderobstång 15x20 mm vitlack Art. 4400 Längder 251, 256, 356, 456, 556, 756 mm Art. nr 362-0006-100 Fäste med 2 tapp 5 mm cc 32 mm

Ventilationsgaller Ventilationsgaller i aluminium Höjd 60, 80, 100 mm Längder 300, 400, 500, 600, 800, 1000 mm Färger natur-, brun-, guld-eloxerat och vitlack

Halogenbelysning 10/20 watt, 12 volt inkl 2 mtr kabel Klarglas Inbyggnadsmått 59 mm Ø Transformator 60/120 Watt för max 6 st lampor

Precision and individuality.

dynamic XP DWD-Dynamic-XP â&#x20AC;&#x201C; The complete drawer system for individual requirements.

www.grass.at, info@grass.eu

Stainless steel

Various colour options for individual design solutions. High-quality surfaces in elegant colours give your furniture exclusivity with style and character. DWD-Dynamic-XP is available in the following colours: • Alu-metallic and stainless steel in the standard programme • White and champagne on request • Beech in the standard sidewood programme

White

alu-metallic Beech

On request (minimum order quantity required)

Sidewood (separate brochure)

Railing for suspension files Technical Information

On request (minimum order quantity required)

Champagne

Dynamic XP drawer runners

DWD XP Tipmatic Plus – the open-by-touch system for drawers without any handles. Irrespective of where you tap the drawer front, the drawer will open gently and evenly. After closing, DWD XP Tipmatic Plus will lock the drawer safely back into place.

Application examples

DWD-Dynamic-XP consists of the following components: • Dynamic-XP with Soft-close – the runner with smooth and soft movement • DWD XP – excellently designed drawer sides. • Add-on systems, Variowing, Duowing, Solowing • Organising system Magic Sorto • Dividing systems Magic Optima, Magic Classic

Certainly, the most pleasant way to close a drawer. Extremely busy in the kitchen? Don't worry, Soft-close will always close your drawer softly.

Accessories Assembly aids

DWD-Dynamic-XP add-on drawer system and drawer runners offers the ideal solution for individual needs. New and innovative product details like Soft-close and the versatility of the add-on systems make this drawer system unique. With DWD-Dynamic-XP you can configure drawers according to the individual needs of your customers – designed to work together in any configuration.

Dividing systems

Add-on systems

Drawers Pot drawers

System information

DWD-Dynamic-XP The innovative drawer system with precision and individuality.

Add-on systems With Duowing, Variowing or Solowing there is a choice of add-on systems.

An add-on system for more storage space and more freedom in design possibilities. Variowing for a truly stunning decor. With a free choice of materials such as glass, acrylic glass or aluminium in the side sections, consistent furniture design is possible down to the smallest details. The drawer system thereby achieves an unusual exclusive note, making it individual and unique. Variowing combines aesthetic demands and functionality, endowing the furniture with style and character.

Variowing is supplemented by the Magic Optima and Magic Classic dividing systems. These create a tidy arrangement of drawer contents and thus complement the system.

Duowing – the compact container solution for storage goods. The side sections closed off to the outside offer stable protection for stored goods. Duowing sits firmly on the drawer side over the round rail and forms a compact, harmonious self-contained unit. High-quality surfaces emphasise the sophisticated design and create eyecatching details in the furniture. The variable dividing systems of Magic Optima and Magic Classic fit ideally into the interior of Duowing

components. They easily create order and provide loose materials with sufficient support.

The flexible add-on system with the striking profile. Solowing makes flexibility visible. Round locking holes; striking fixed points for the dividing systems Magic Classic or Magic Optima. Variable, individual organisation of the pot drawer is made easy: simple and precise locking into place and easy to reposition. Solowing helps create order and provide loose materials with sufficient support. High-quality surfaces emphasise the sophisticated design and create eye-catching details in the furniture.

Some features at a glance: • Simply hang into the railing system of DWD-Dynamic-XP • Integrated inclination adjustment of drawer front through lengthwise dividing rail • Stable front panel support • Fixed connection of front and drawer back • Fast and efficient installation • A maximum of storage space • For variable partitioning in length and width with Magic Classic or Magic Optima

•

• • •

•

• • • •

Integrated inclination adjustment of drawer front through lengthwise dividing rail Stable front panel support Fast installation with variable options Fit and remove without tools

Integrated inclination adjustment of drawer front through lengthwise dividing rail Stable front panel support Fixed connection of front and drawer back Fast and efficient installation Fit and remove without tools

Two systems – one aim: Organise with style For the DWD-Dynamic-XP add-on systems we offer two dividing systems to allow optimum use of storage space: Magic Optima for the add-on systems Variowing, Duowing, Solowing, and Magic Classic for the add-on systems Solowing and Duowing. Both dividing systems have numerous variable system components that enable individual organisation of drawers.

The dividing systems put pots and pans into their place and utilise every corner of the drawer.

Accessories Assembly aids

•

Adjustable system elements Free choice of interior partitioning Optimum storage space utilisation

Application examples

•

Technical Information

•

Railing for suspension files

The advantages at a glance: • Trays made of stainless steel • More storage due to the clever design of the Sorto insert. • Hygienically approved • Easy to clean, dishwasher safe • Versatile system due to spring-loaded divider rail. • Expand and upgrade individually.

Dynamic XP drawer runners

Everybody needs help in the kitchen, especially when organising the drawers. Magic Sorto, our drawer organising system, has everything the customer needs. Excellent design and versatility for custom storage solutions.

Dividing systems

Add-on systems

Drawers Pot drawers

System information

Organising systems Magic Sorto, Magic Optima and Magic Classic.

DWD-Dynamic-XP Product overview.

Page System information

2–5

Drawer • Drawer side height 95 mm • Double-wall steel drawer sides for wooden and steel drawer backs

Inset drawer Inset front profile with front fixings

Pot drawer • Drawer side height 95 mm • Double-wall steel drawer sides for wooden and steel drawer backs

Inset drawer with railing Inset front profile with front fixings

Pot drawer, variable drawer back heights • Screw-on version

Steel drawer backs • Height 86 mm • Height 182 mm

Railing • Screw-on version • For wooden and steel drawer backs

•

System information

Page

Variowing • Glass add-on system • For inserts in various materials • Mounted on the railing • Set also in acrylic glass incl. holders

Duowing • Double-wall add-on system • Mounted on the railing • Also in stainless steel

Solowing • Single-wall add-on system • Mounted on the railing

Magic Sorto set • Drawer organising sets

Magic Classic • Dividing set • Smartboard Classic • For Duowing • For Solowing

Add-on systems Dividing systems Railing for suspension files Dynamic XP drawer runners Accessories Assembly aids Application examples

34 – 37

Technical Information

Magic Optima Organising systems • For railing • For Variowing • For Duowing • For Solowing

Drawers Pot drawers

Railing • Quick-mounting version • For wooden and steel drawer backs

DWD-Dynamic-XP Product overview.

Page Subdivision for round railing • Railing tube • Cross railing and bottle holder

Railing for suspension files • Oval aluminium tube • Good stability and load-bearing capacity

Dynamic XP/40 kg • Full extension 40 kg with integrated Soft-close

Dynamic XP/60 kg • Full extension 60 kg with integrated Soft-close

Dynamic XP Tipmatic Plus/40 kg Full extension 40 kg • Opens and closes drawers and pot drawers without handles

•

Front-bottom connector Punch • For a solid connection between bottom and front Drilling jig for front-bottom connector For drilling into the drawer bottom when using the front-bottom connector

•

Spacer For internal drawers behind a door

•

Child lock • For DWD XP drawers Assembly aids • Pneumatic mounting clamp • Conversion set Agantis • ZMV-fix mounting clamp • DWD XP cabinet drilling jig

System information

Page Page 54

Assembly aids • DWD XP cabinet drilling jig • Tipmatic Plus XP cabinet drilling jig • Marker jig • Front drilling jig • Drilling jig for railing

400

450

500

550

Assembly aids Insertion ram for front fixing • DWD XP knock-in tool for front fixing • Centring drill bit • Screw driver • Screws

Application and order examples Sink drawer • Steel drawer backs for sink drawer

Application and order examples • Oven base drawer • Spacer plate 2 mm

Application and order examples • Large drawer

Application and order examples Pull-out crockery cabinet

Application and order examples • Pull-out larder

Drawers Pot drawers

400

450

500

550

Add-on systems

•

Accessories Assembly aids

Dynamic XP drawer runners

Railing for suspension files

Dividing systems

•

Technical Information

Application examples

•

64 – 67

DWD XP drawer Drawer sides, height 95 mm, front fixing and holder for wooden drawer backs.

• • • • •

Bottom fixing with screws or knock-in claws Integrated removal and transport protection Same width for bottom and drawer back Front fixing made of zinc die-casting 2-dimensional front adjustment with height adjustment

DWD XP drawer sides H95 Nominal length (NL)

Item No. alu-metallic

Item No. stainless steel

275

6100.275.17

6105.275.17

6105.275.40

350

6100.350.17

6105.350.17

6105.350.40

400

6100.400.17

6105.400.17

6105.400.40

450

6100.450.17

6105.450.17

6105.450.40

500

6100.500.17

6105.500.17

6105.500.40

550

6100.550.17

6105.550.17

6105.550.40

600

6100.600.17

6105.600.17

650

6100.650.17

6105.650.17

PU 1

PU 20

PU/packaging unit

PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 drawer sides left and right in separate cartons, including cover caps

Nominal length 300 mm on request

Imprinted cover caps on request

Holder set for wooden drawer back H86 Item No. alu-metallic

Item No. nickel plated

Height 86

6771.17.VE1

6771.17.VE200

6771.15.VE1

PU/packaging unit

PU 1/100

PU 200

PU 1/100

PU 1/100 = 1 set (left / right) per bag / 100 sets per carton PU 200 = 200 sets (left / right) loose in separate cartons

Front fixing Item No. Screw-on

6850.VE400

Dowel

6860.VE400

Expanding dowel

6865.VE400

PU/packaging unit

PU 400

PU 400 = 400 pcs. loose in carton

DWD XP steel drawer backs

page 20

Magic Sorto organising system

page 32

Assembly aids

page 50 – 55

Dynamic XP full-extension runners

page 44 – 49

Child lock

page 52

Technical information

page 64 – 67

Ă&#x2DC; 3,5 x 15 Wood screw

Bottom

min. 49

Drawer back width LW -74

Bottom width LW -74

Add-on systems

min. 55

Ă&#x2DC; 10 x 12 for dowels

Drawers Pot drawers

Drawer back

68 Drawer back height

Inside cabinet width = LW Drawer back width = LW -74

System information

Cutting dimensions based on 16 mm particle board

Bottom length NL -9

Mounting positions

Dividing systems

Assembly instructions: Front fastening with press-in dowels When using front fixings with press-in dowels, the front holes must be appropriately countersunk. The sharp edges produced with hard surface coatings, e.g. melamine, can to some extent cut off the ribs of the dowels as they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, which do not require any countersinking and still guarantee optimal holding strength.

Side overlay

Railing for suspension files

21.5 Bottom width = LW -74

Bottom overlay

Minimum installation depth = NL NL = Nominal length of runner

Dynamic XP drawer runners

Drawer with wooden back

Accessories Assembly aids

2 Holder for wooden drawer back 86 mm

Application examples

Dynamic XP 40 kg, see page 44 Dynamic XP 60 kg, see page 46 Dynamic XP Tipmatic Plus 40 kg, see page 48

1 Drawer side H95

For mounting to cabinet side we recommend special Euro screws 191 and 192, see page 55

All dimensions in millimetres.

Technical Information

3 Front fixing

DWD XP inset drawer Front profile and front fixing.

• • • •

Front profile made of high-quality coated aluminium Simple cut to special cabinet widths Plastic front panel holder is easy to fit Colour matched to drawer sides

Front profile Cabinet width (cabinet side S16)

Item No. alu-metallic

Item No. anodized

600

6800.477.17

1200

6800.1077.17

6800.1077.42

PU 20

PU/packaging unit

Front profiles for cutting to size. Pre-cut front profiles available upon request.

Front fixing Item No. alu-grey 6800.32 PU/packaging unit

PU 1/40

PU 1/40 = 1 set per bag consisting of: front fixing (left / right) incl. screws / 40 sets per carton

DWD XP steel drawer backs

page 20

Magic Sorto organising system

page 32

Assembly aids

page 50 – 55

Dynamic XP full-extension runners

page 44 – 49

Child lock

page 52

Technical information

page 64 – 67

Bottom

Bottom width LW -74

Add-on systems

min. 55

min. 49

Drawer back width LW -74

Drawers Pot drawers

Drawer back

68 Drawer back height

Inside cabinet width = LW Drawer back width = LW -74

System information

Cutting dimensions based on 16 mm particle board

Bottom length NL -9

Mounting positions

Minimum installation depth = NL +9 mm NL = Nominal length of runner

Inside profile width = LW -90

Front edge of cabinet 11 mm set back

Railing for suspension files

Dividing systems

Bottom width = LW - 74

28 37

Cutting dimensions for front profile

Dynamic XP drawer runners

Inset drawer

Front holder (incl. front fixing)

For fixing to cabinet side we recommend special Euro screws 191 and 192, see page 55

Application examples

Front profile

All dimensions in millimetres.

Technical Information

Accessories Assembly aids

Inset front profile Width = LW -90

DWD XP pot drawer Drawer sides, height 95 mm, front fixing and holder for high wooden drawer backs.

• • • • •

DWD XP drawer sides H95 Nominal length (NL)

Item No. alu-metallic

Item No. stainless steel

350

6100.350.17

6105.350.17

6105.350.40

400

6100.400.17

6105.400.17

6105.400.40

450

6100.450.17

6105.450.17

6105.450.40

500

6100.500.17

6105.500.17

6105.500.40

550

6100.550.17

6105.550.17

6105.550.40

600

6100.600.17

6105.600.17

650

6100.650.17

6105.650.17

PU 1

PU 20

PU/packaging unit

PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 drawer sides left and right in separate cartons, including cover caps

Nominal length 300 mm on request

Imprinted cover caps on request

Holder set for wooden drawer back H182 Item No. alu-metallic

Item No. nickel plated

Height 182

6773.17.VE1

6773.17.VE200

6773.15.VE1

PU/packaging unit

PU 1/100

PU 200

PU 1/100

PU 1/100 = 1 set (left/right) per bag / 100 sets per carton PU 200 = 200 sets (left/right) loose in separate cartons

Front fixing Item no Screw-on

6850.VE400

Dowel

6860.VE400

Expanding dowel

6865.VE400

PU/packaging unit

PU 400

PU 400 = 400 pcs. loose in carton

DWD XP steel drawer backs

page 20

DWD XP railing

page 22 – 25

Assembly aids

page 50 – 55

Dynamic XP full-extension runners

page 44 – 49

DWD XP add-on systems

page 26 – 31

Technical information

page 64 – 67

Cutting dimensions based on 16 mm particle board

System information

Mounting positions

Drawer back width = LW -74 Drawer back

164 Drawer back height

Inside cabinet width = LW

164

Drawers Pot drawers

Bottom Ă&#x2DC; 3,5 x 15 Wood screw

Bottom length NL -9

min. 145

Drawer back width LW -74

Add-on systems

Ă&#x2DC; 10 x 12 for dowels

Minimum installation depth = NL +9 NL = Nominal length of runner

Side overlay

Dividing systems Railing for suspension files

21.5 Bottom width = LW -74

Usage instructions: Front fastening with press-in dowels When using front fixings with press-in dowels, the front holes must be appropriately countersunk. The sharp edges produced when drilling into hard surface coatings, e.g. melamine, can damage some of the dowel ribs when they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, which do not require any countersinking and still guarantee optimal holding strength.

Bottom overlay

min. 55

Bottom width LW -74

Dynamic XP drawer runners

Pot drawer with wooden drawer back

Accessories Assembly aids

2 Holder for wooden drawer back height 182 mm

Application examples

Dynamic XP 40 kg, see page 44 Dynamic XP 60 kg, see page 46 Dynamic XP Tipmatic Plus 40 kg, see page 48

For fixing to cabinet side we recommend special Euro screws 191 and 192, see page 55

All dimensions in millimetres.

Technical Information

1 Drawer side H95 3 Front fixing

DWD XP inset drawer with railing Front profile and front fixing.

• • • • •

Front profile made of high-quality coated, anodized aluminium Easy to cut to special cabinet widths Plastic front panel holder is easy to fit All add-on systems can be used Railing for wooden and steel drawer back H 182

Front profile Cabinet width (cabinet side S16)

Item No. alu-metallic

Item No. anodized

600

6800.477.17

1200

6800.1077.17

6800.1077.42

PU 20

PU/packaging unit

Front profile for cutting to size for individual cabinet width. Pre-cut front profiles available upon request.

Front fixing Item No. alu-grey 6810.32 PU/packaging unit

PU 1/40

PU 1/40 = 1 set per bag consisting of: front fixing left/right incl. screws / 40 sets per carton

Railing tube Cabinet width (cabinet side S16)

Item No. alu-metallic

600 1200 PU/packaging unit

Item No. nickel plated

13201.487.17

13202.1087.17

13201.1087.17

13202.1087.15

PU 20

PU 100

PU 20

PU 20 = 20 pieces loose PU 100 = 100 pieces loose Railing tube also for cutting to size of individual cabinet widths.

Railing set for high inset drawer

PU/packaging unit

Item No. alu-metallic

Item No. nickel plated

13136.500.17

13136.500.15

PU 1/125

PU 1/25

PU 1/25 = 1 set railing left/right per bag / 25 sets per carton For other lengths see page 24 quick-mounting railing

DWD XP steel drawer backs

page 20

DWD XP railing

page 22 – 25

Assembly aids

page 50 – 55

Dynamic XP full-extension runners

page 44 – 49

DWD XP add-on systems

page 26 – 31

Technical information

page 64 – 67

Inside cabinet width = LW Drawer back width = LW -74

Drawer back

System information

Cutting dimensions based on 16 mm particle board

164 Drawer back height

Mounting positions

Bottom length NL -9

164

min. 145

Bottom

Drawers Pot drawers

Drawer back width LW -74

Add-on systems

Bottom width LW -74

Front edge of cabinet 11 mm set back

Dividing systems

min. 55

Minimum installation depth = NL +9 NL = Nominal length of runner

Bottom width = LW - 74 28 37

Cutting dimensions of drawer front profile and railing

Dynamic XP drawer runners

Inset drawer with railing

Accessories Assembly aids

Rail Width = LW -80

Inset front profile Width = LW -90

4 Railing tube

Front profile

Front holder (incl. front fixing)

Railing for inset drawer

For mounting to the cabinet side we recommend special Euro screws 191 and 192, see page 55 All dimensions in millimetres.

Technical Information

Application examples

Railing for suspension files

Inside profile width = LW -90

DWD XP pot drawer with variable drawer back height.

•

• • • •

Open holder H86 and H182 for drawer back with variable rail holder For variable drawer back heights For use with high drawer fronts Application as double rail Compatible with the add-on systems

Holder set H86 for variable wooden drawer back height Item No. alu-metallic

Item No. nickel plated

for single railing

6786.17

6786.15

PU/packaging unit

PU 1/100

PU 1/100 = 1 set per bag consisting of: 2 holders for variable height wooden drawer back left/right, 2 rail holders / 100 sets in carton

Holder set H182 for variable wooden drawer back height Item No. alu-metallic

Item No. nickel plated

for double railing

6787.17

6787.15

PU/packaging unit

PU 1/100

PU 1/100 = 1 set per bag consisting of: 2 holders for variable height wooden drawer back left/right, 2 rail holders / 100 sets in carton

Drawer back holder H86 left/right for variable wooden drawer back height Item No. alu-metallic for single railing

6781.17

PU/packaging unit

PU 200

PU 200 = 200 left pcs. and 200 right pcs. per carton

Drawer back holder H182 left/right for variable wooden drawer back height Item No. alu-metallic for double railing

6783.17

PU/packaging unit

PU 200

PU 200 = 200 left pcs. and 200 right pcs. per carton

Railing holder for variable wooden drawer back height Item No. alu-metallic 6788.17 PU/packaging unit

PU 400

PU 400 = 400 pcs. loose in carton

DWD XP steel drawer backs

page 20

DWD XP railing

page 22 – 25

Assembly aids

page 50 – 55

Dynamic XP full-extension runners

page 44 – 49

DWD XP add-on systems

page 26 – 31

Technical information

page 64 – 67

Drawer back width = LW -74

Drawers Pot drawers X = Y - 69 96

Dividing systems

Y = max. 261 / min. 216

Ø 10 x 12 for dowels

Bottom width = LW -74

Dynamic XP drawer runners

21.5 1 Holder set H86 for variable drawer back height

Railing for suspension files

Pot drawer with variable drawer back height

Bottom overlay

min. 55

Side overlay

Ø 3,5 x 15 Wood screw

Bottom overlay

min. 55

21.5 Bottom width = LW -74

Add-on systems

X = Y - 69

Ø 10 x 12 for dowels

Y = max. 164 / min. 120

Ø 3,5 x 15 Wood screw

System information

Inside cabinet width = LW min. 27

Inside cabinet width = LW

min. 27

Mounting positions

Side overlay

3 Holder H86 for variable drawer back height

Accessories Assembly aids

5 Railing holder 2 Holder set H182 for variable drawer back height

For fitting to cabinet side we recommend special Euro screws 191 and 192, see page 55

All dimensions in millimetres.

Technical Information

Application examples

4 Holder H182 for variable drawer back height

DWD XP steel drawer backs for drawers and pot drawers.

•

• •

High-quality steel drawer backs with fixed widths and heights Same surface finish as drawer sides For 16 mm cabinet sides (for 18 and 19 mm cabinet sides on request)

Steel drawer drawer back, height 86 / S16 Cabinet width (cabinet side S16)

Item No. alu-metallic

300

6713.217.17

350

6713.267.17

400

6713.317.17

450

6713.367.17

500

6713.417.17

600

6713.517.17

800

6713.717.17

900

6713.817.17

1000

6713.917.17

1200

6713.1117.17

PU 25

PU 40

PU/packaging unit PU 25 = 25 pcs. loose in carton PU 40 = 40 pcs. loose in carton

Steel drawer drawer back, height 182 / S16 Cabinet width (cabinet side S16)

Item No. alu-metallic

300

6733.217.17

350

6733.267.17

400

6733.317.17

450

6733.367.17

500

6733.417.17

600

6733.517.17

800

6733.717.17

900

6733.817.17

1000

6733.917.17

1200

6733.1117.17

PU 15

PU 25

PU/packaging unit PU 15 = 15 pcs. loose in carton PU 25 = 25 pcs. loose in carton

DWD XP drawer

page 12

Dynamic XP full-extension runners

page 44 – 49

Assembly aids

page 50 – 55

DWD XP pot drawer

page 14

Sink application

page 56

Technical information

page 64 – 67

Cutting dimensions based on 16 mm particle board

Bottom

Drawers Pot drawers

Steel drawer back

Bottom length NL -19

Steel drawer back height 86 mm

System information

Drawer with steel drawer back H 86

Add-on systems

Bottom width LW -74

For cabinet width 800 mm and above, we recommend attaching the steel drawer back to the bottom with a wood screw.

Bottom

Dynamic XP drawer runners

Steel drawer back

Accessories Assembly aids

Bottom length NL -19

Steel drawer back height 182 mm

Cutting dimensions based on 16 mm particle board

Bottom width LW -74

Application examples

Minimum installation depth = NL NL = Nominal length of runner

For cabinet width 800 mm and above, we recommend attaching the steel drawer back to the bottom with a wood screw. All dimensions in millimetres.

Technical Information

Pot drawer with steel drawer back height 182

Railing for suspension files

Dividing systems

Minimum installation depth = NL NL = Nominal length of runner

DWD XP screw-on railing for wooden and steel drawer backs.

•

• •

Screw to front panel, quick and strong connection of drawer back to front panel Fitted with clips to drawer back Simple adjustment of front inclination

Screw-on railing set Nominal length (NL)

Item No. alu-metallic

Item No. nickel plated

350

13030.350.17

13030.350.15

400

13030.400.17

13030.400.15

450

13030.450.17

13030.450.15

500

13030.500.17

13030.500.15

550

13030.550.17

13030.550.15

600

13030.600.17

650

13030.650.17

PU 1/25

PU/packaging unit

PU 1/25 = 1 set per bag/25 sets per carton 1 set consisting of: 1 railing left, 1 railing right incl. front fixing cover, 2 screw-on front fixings for railing

Tilt adjustment Front panel

DWD XP pot drawer

page 14

DWD XP add-on systems

page 26 – 31

Assembly aids

page 50 – 55

DWD XP steel drawer backs

page 20

DWD XP dividing systems

page 32 – 41

Technical information

page 64 – 67

Cutting dimensions based on 16 mm particle board

System information

Mounting positions

Drawer back

164 Drawer back height

Inside cabinet width = LW Drawer back width = LW -74

Ă&#x2DC; 10 x 12 for dowels

Drawers Pot drawers

Bottom width LW -74 Minimum installation depth = NL +9 NL = Nominal length of runner

Railing for suspension files

Side overlay

Dynamic XP drawer runners

Pot drawer with screw-on railing

Accessories Assembly aids

(Steel drawer back, height 182 mm, see page 20)

Holder set for wooden drawer back, height 182 mm, see page 14

Screw-on railing DWD XP drawer sides, see page 14

Application examples

Dynamic XP 40 kg, see page 44 Dynamic XP 60 kg, see page 46 Dynamic XP Tipmatic Plus 40 kg, see page 48

All dimensions in millimetres.

Technical Information

21.5 Bottom width = LW -74

Bottom overlay

Dividing systems

min. 55

Add-on systems

164

Bottom Ă&#x2DC; 3,5 x 15 Wood screw

Bottom length NL -9

min. 145

Drawer back width LW -74

DWD XP quick-mounting railing for wooden and steel drawer backs.

• • •

Quick to fit to front panel for efficient preparation of panel Fitted with clips to drawer back Simple adjustment of front inclination

Quick-mounting railing set Nominal length (NL)

Item No. alu-metallic

Item No. nickel plated

350

13131.350.17

400

13131.400.17

450

13131.450.17

500

13131.500.17

13131.500.15

550

13131.550.17

600

13131.600.17

650

13131.650.17

PU 100

PU/packaging unit

PU 100 = 100 sets in separate cartons, consisting of: left/right railing including cover sleeves

Tilt adjustment Front panel

DWD XP pot drawer

page 14

DWD XP add-on systems

page 26 – 31

Assembly aids

page 50 – 55

DWD XP steel drawer backs

page 20

DWD XP dividing systems

page 32 – 41

Technical information

page 64 – 67

Cutting dimensions based on 16 mm particle board

System information

Mounting positions Inside cabinet width = LW Drawer back width = LW -50

Ă&#x2DC; 10 x 12 for dowels

Drawers Pot drawers

Bottom width LW -74 Minimum installation depth = NL NL = Nominal length of runner

Railing for suspension files

Side overlay

Dynamic XP drawer runners

Pot drawer with quick-fit railing

Accessories Assembly aids

(Holder set for wooden drawer back, height 182 mm, see page 14)

(Steel drawer back, height 182 mm, see page 20)

Quick-mounting railing DWD XP drawer sides, see page 14

Application examples

Dynamic XP 40 kg, see page 44 Dynamic XP 60 kg, see page 46 Dynamic XP Tipmatic Plus 40 kg, see page 48

All dimensions in millimetres.

Technical Information

21.5 Bottom width = LW -74

Bottom overlay

Dividing systems

min. 55

Add-on systems

166

Bottom Ă&#x2DC; 3,5 x 15 Wood screw

Bottom length NL -19

min. 145

Steel drawer back

DWD XP Variowing Glass add-on system.

• • • •

Glass add-on system based on round railing Valuable, high-quality glass look (4 mm glass) * Easy to fit and remove without tools Can be used with Magic Optima dividing system

* Glass sides not supplied by Grass

Variowing glass holder set Item No. alu-grey for Variowing

14700.32

14701.32

PU/packaging unit

PU 1/50

PU 200

PU 1/50 = 1 holder set, front and back, left/right per bag / 50 sets per carton PU 200 = 200 holder sets, front and back, left/right loose

Variowing Acrylic glass set Nominal length (NL)

Item No. alu-metallic

500

14750.500.32

550

14750.550.32

PU/packaging unit

PU 1/20

1 set per bag / 20 sets per carton 1 set consists of: 1 set left/right glass holder front and back 2 acrylic glas sides (satin finish and protection film on both sides) Acrylic glass in industrial packaging and imprinted with customer logo available on request

DWD XP pot drawer

page 14

DWD XP railing

page 22 – 25

Assembly aids

page 50 – 55

Dynamic XP full-extension runners

page 44 – 49

DWD XP dividing systems

page 32 – 41

Technical information

page 64 – 67

Mounting positions

Inside cabinet width = LW

60 - 0.5

Drawer back width = LW -74

164

min. 145

Ø 3,5 x 15 Wood screw

GL /glass length

in mm

in mm ± 0.5 mm

350

315

400

365

450

415

500

465

550

515

600

565

650

615

Side overlay

We recommend SGS glass (toughened safety glass), please refer to national and international safety standards.

Railing for suspension files

21.5 Bottom width = LW -74

Bottom overlay

Information: All edges must be chamfered (approx. 0.7 mm x 45°).

Dynamic XP drawer runners

Pot drawer with Variowing add-on system in glass

Railing, see page 22 and 24 2 Acrylic glass, glass (Steel drawer back, height 182 mm, see page 20)

Accessories Assembly aids

Holder set for wooden drawer back, height 182 mm, see page 14 Variowing glass holder, back

Application examples

DWD XP drawer sides, see page 14 Dynamic XP 40 kg, see page 44 Dynamic XP 60 kg, see page 46 Dynamic XP Tipmatic Plus 40 kg, see page 48

Variowing glass holder, front

Front fixing, see page 14

All dimensions in millimetres.

Technical Information

min. 55

Ø 10 x 12 for dowels

NL/nominal length

Add-on systems

4 ± 0.1

Drawers Pot drawers

N=L

Dividing systems

±0

System information

Dimensions for glass cutting

DWD XP Duowing Double-wall add-on system.

• •

•

Double-wall add-on system based on round railing Can be used with Magic Classic and Magic Optima dividing systems Easy to fit and remove without tools

Duowing Nominal length (NL)

Item No. alu-metallic

Item No. stainless steel

400

14400.400.17

14400.400.40

450

14400.450.17

14401.450.17

14400.450.40

500

14400.500.17

14401.500.17

14400.500.40

14401.500.40

550

14400.550.17

14401.550.17

14400.550.40

600

14400.600.17

650

14400.650.17

PU 1

PU 10

PU 1

PU 10

PU/packaging unit

PU 1 = 1 set consisting of: 2 Duowing sides, 1 left anti-slip device, 1 right anti-slip device in carton PU 10 = 10 sets in carton

DWD XP pot drawer

page 14

DWD XP railing

page 22 – 25

Assembly aids

page 50 – 55

Dynamic XP full-extension runners

page 44 – 49

DWD XP dividing systems

page 32 – 41

Technical information

page 64 – 67

Mounting positions

System information

Cutting dimensions based on 16 mm particle board

164 Drawer back height

Inside cabinet width = LW Drawer back width = LW -74 Drawer back

Bottom width LW -74 Minimum installation depth = NL +9 NL = Nominal length of runner

Railing for suspension files

21.5 Bottom width = LW -74

Bottom overlay

Dividing systems

min. 55

Add-on systems

Ă&#x2DC; 10 x 12 for dowels

Bottom length NL -9

164

min. 145

Bottom Ă&#x2DC; 3,5 x 15 Wood screw

Drawers Pot drawers

Drawer back width LW -74

Side overlay

Dynamic XP drawer runners

Pot drawer with Duowing add-on system

Railing, see page 22 and 24 1 Duowing

Accessories Assembly aids

(Steel drawer back, height 182 mm, see page 20)

Holder set for wooden drawer back, height 182 mm, see page 14

Anti-slip device (included with the Duowing side)

Dynamic XP 40 kg, see page 44 Dynamic XP 60 kg, see page 46 Dynamic XP Tipmatic Plus 40 kg, see page 48

Front fixing, see page 14 All dimensions in millimetres.

Technical Information

Application examples

DWD XP drawer sides, see page 14

DWD XP Solowing Single-wall add-on system.

• •

•

Single-wall add-on system based on round railing Can be used with Magic Classic and Magic Optima dividing systems Easy to fit and remove without tools

Solowing Nominal length (NL)

Item No. alu-metallic

400

12511.400.17

450

12511.450.17

500

12511.500.17

550

12511.550.17

PU/packaging unit

PU 40

PU 40 = 40 pcs. (2 pcs. are needed for one drawer)

DWD XP pot drawer

page 14

DWD XP railing

page 22 – 25

Assembly aids

page 50 – 55

Dynamic XP full-extension runners

page 44 – 49

DWD XP dividing systems

page 32 – 41

Technical information

page 64 – 67

Mounting positions

System information

Cutting dimensions based on 16 mm particle board

Drawer back

164 Drawer back height

Inside cabinet width = LW Drawer back width = LW -74

164

Bottom Ă&#x2DC; 3,5 x 15 Wood screw

Drawers Pot drawers Add-on systems

Bottom length NL -9

min. 145

Drawer back width LW -74

Ă&#x2DC; 10 x 12 for dowels

Minimum installation depth = NL +9 NL = Nominal length of runner

Bottom width = LW -74

Railing for suspension files

21.5

Bottom overlay

Dividing systems

Side overlay

Dynamic XP drawer runners

pot drawer with Duowing add-on system

Railing, see page 22 and 24

Accessories Assembly aids

(Steel drawer back, height 182 mm, see page 20)

Holder set for wooden drawer back, height 182 mm, see page 14

1 Solowing

Application examples

DWD XP drawer sides, see page 14 Dynamic XP 40 kg, see page 44 Dynamic XP 60 kg, see page 46 Dynamic XP Tipmatic Plus 40 kg, see page 48

Front fixing, see page14 All dimensions in millimetres.

Technical Information

min. 55

Bottom width LW -74

DWD XP Magic Sorto Drawer organising sets.

• • • •

Modular-based expandable system Individual components, dishwasher-safe Safe for food, hygienically approved Trays in stainless steel

Magic Sorto set Item No. alu-metallic

Item No. stainless steel

Nominal length (NL)/set 400 B3

12030.400.17

400 B4

12040.400.17

450 B3

12030.450.17

450 B4

12040.450.17

500 B3

12030.500.17

12030.500.40

500 B4

12040.500.17

12040.500.40

500 B4S

12046.500.17

12046.500.40

550 B3

12030.550.17

550 B4

12040.550.17

PU 1

PU/packaging unit PU 1 = 1 set in carton

Spring-loaded divider Nominal length (NL) 500

Item No. alu-metallic 12101.500.17

PU/packaging unit

PU 25

PU 25 = 25 pcs. loose in carton Tray 180 x 90 Spacer Tray 270 x 90

Spring-loaded divider

Tray 450 x 90

DWD XP drawer

page 10

Dynamic XP full-extension runners

page 44 – 49

Assembly aids

page 50 – 55

DWD XP inset drawer

page 12

Child lock

page 52

Technical information

page 64 – 67

2 Magic Sorto set NL 400 B4 NL 400 and cabinet widths from 600 mm.

Consisting of:

2 trays 270 x 90 mm 3 trays 180 x 90 mm 1 spacer 270 mm 1 spring-loaded divider

4 trays 270 x 90 mm 2 trays 180 x 90 mm 2 spacers 180 mm 1 spring-loaded divider

271.5

4 Magic Sorto set NL 450 B4 NL 450 and cabinet widths from 600 mm.

Consisting of:

2 trays 270 x 90 mm 3 trays 180 x 90 mm 3 space-filler trays 60 mm 1 spring-loaded divider

4 trays 270 x 90 mm 2 trays 180 x 90 mm 4 space-filler trays 60 mm 1 spring-loaded divider

5 Magic Sorto set NL 500 B3

6 Magic Sorto set NL 500 B4

452.5

Add-on systems

NL 450 and cabinet widths from 450 mm.

7 Magic Sorto set NL 500 B4S

NL 500 and cabinet widths from 600 mm.

Consisting of:

3 trays 270 x 90 mm 3 trays 180 x 90 mm 1 spacer 270 mm 1 spring-loaded divider

4 trays 270 x 90 mm 4 trays 180 x 90 mm 2 spacers 180 mm 1 spring-loaded divider

1 trays 450 x 90 mm 3 trays 270 x 90 mm 3 trays 180 x 90 mm 2 spacers 180 mm 1 spring-loaded divider

NL 550 and cabinet widths from 450 mm.

NL 550 and cabinet widths from 600 mm.

Consisting of:

3 trays 270 x 90 mm 3 trays 180 x 90 mm 4 space-filler trays 70 mm 1 spring-loaded divider

4 trays 270 x 90 mm 4 trays 180 x 90 mm 3 space-filler trays 70 mm 1 spring-loaded divider

Dynamic XP drawer runners

9 Magic Sorto set NL 550 B4

Accessories Assembly aids

8 Magic Sorto set NL 550 B3

Railing for suspension files

NL 500 and cabinet widths from 450 mm.

Dividinag systems

3 Magic Sorto set NL 450 B3

Drawers Pot drawers

NL 400 and cabinet widths from 450 mm.

90.5 181

Measurements 362

271,5

65.5

65.5 21.5 319

Application examples

90.5

21.5

409.5

All dimensions in millimetres.

Technical Information

1 Magic Sorto set NL 400 B3

System information

Assembly variations

DWD XP Magic Optima Dividing system for Variowing, Duowing and Solowing add-on system.

•

• • •

Individual organisation of the available space for a clear and tidy arrangement of drawer contents Quick to fit without tools Can be fitted to existing drawers Tool-free adjustment, variable use of space

DWD XP Magic Optima for Variowing, Duowing packaged as set on page 36

Magic Optima divider profile Cabinet width (cabinet side S16)

Item No. alu-metallic

Item No. anodized

600

1200

12800.1072.17

PU/packaging unit

12800.472.17

PU 10

12800.1072.42 PU 20

PU 10

PU 10 = 10 pcs. wrapped separately in film PU 20 = 20 pcs. wrapped separately in film

Magic Optima profile holder for Variowing system and round railing Item No. alu-grey for Variowing

12820.32

12821.32

PU/packaging unit

PU 2/40

PU 100

PU 2/40 = 2 pcs. per bag / 40 pcs. per carton PU 100 = 100 pcs. loose

Magic Optima profile holder for Duowing system Item No. alu-grey for Duowing

12810.32

12811.32

PU/packaging unit

PU 2/40

PU 100

PU 2/40 = 2 pcs. per bag / 40 pcs. per carton PU 100 = 100 pcs. loose

Magic Optima profile holder for Solowing system Item No. alu-grey for Solowing

12815.32

12816.32

PU/packaging unit

PU 2/40

PU 100

PU 2/40 = 2 pcs. per bag / 40 pcs. per carton PU 100 = 100 pcs. loose

Magic Optima Smart Board Item No. alu-grey 12850.32 PU/packaging unit

PU 20

PU 20 = 20 pcs. loose

DWD XP railing

page 22 – 25

DWD XP Duowing

page 28

Assembly aids

page 50 – 55

DWD XP Variowing

page 26

DWD XP Solowing

page 30

Technical information

page 64 – 67

System information Duowing – cutting dimensions for Magic Optima profile

Inside cabinet width = LW

Magic Optima with Duowing

Magic Optima with Solowing

Drawers Pot drawers

Magic Optima with Variowing

Pot drawer with Variowing and Magic Optima dividing system 5 Magic Optima Smart Board 2 Magic Optima profile holder for Variowing

1 Magic Optima divider profile

X = LW -96

Inside cabinet width = LW X

5 Magic Optima Smart Board 3 Magic Optima profile holder for Duowing

1 Magic Optima divider profile

X = LW -96

Solowing – cutting dimensions for Magic Optima profile

Pot drawer with Solowing and Magic Optima dividing system 5 Magic Optima Smart Board

Inside cabinet width = LW

4 Magic Optima profile holder for Solowing

1 Magic Optima divider profile

Optima profile for Solowing X = LW -96 All dimensions in millimetres.

Technical Information

Application examples

Accessories Assembly aids

Optima profile Duowing

Pot drawer with Duowing and Magic Optima dividing system

Railing for suspension files

Duowing – cutting dimensions for Magic Optima profile

Dynamic XP drawer runners

Optima profile for Variowing

Dividinag systems

Add-on systems

DWD XP Magic Optima set for railing drawer, Variowing and Duowing add-on system.

• •

• • •

Application range for cabinet sides S16 – 19 Individual organisation of the available space for a clear and tidy arrangement of drawer contents Quick to fit without tools Can be fitted to existing drawers Tool-free adjustment, variable use of space

DWD XP Magic Optima product range for Variowing, Duowing and Solowing on page 34

Magic Optima set for railing and Variowing Cabinet width (cabinet side S16–19)

Item No. alu-metallic

500

12885.366.17

600

12885.466.17

800

12885.666.17

900

12885.766.17

1000

12885.866.17

1200

12885.1066.17

PU/packaging unit

PU 1/10

PU 1/10 = 1 set per bag/10 sets per carton

Magic Optima set for Duowing Cabinet width (cabinet side S16–19)

Item No. alu-metallic

500

12875.366.17

600

12875.466.17

800

12875.666.17

900

12875.766.17

1000

12875.866.17

1200

12875.1066.17

PU/packaging unit

PU 1/10

PU 1/10 = 1 set per bag/10 sets per carton

1 DWD XP Magic Optima set consists of: 1 2 X 1

Magic Optima profile, length XXX Optima holders (Vario or Duowing) Smart Boards (depends on width of cabinet) Mounting instruction

CW CW CW CW CW CW

500: 600: 800: 900: 1000: 1200:

profile, profile, profile, profile, profile, profile,

length length length length length length

366, 2 Smart Boards 466, 2 Smart Boards 666, 3 Smart Boards 766, 3 Smart Boards 866, 4 Smart Boards 1066, 4 Smart Boards

DWD XP railing

page 22 – 25

DWD XP Duowing

page 28

Assembly aids

page 50 – 55

DWD XP Variowing

page 26

DWD XP Solowing

page 30

Technical information

page 64 – 67

System information Railing–cutting dimensions for Magic Optima profile

Inside cabinet width = LW

Pot drawer with railing and Magic Optima dividing system Magic Optima Smart Board Magic Optima profile holder for railing

Magic Optima divider profile

X = LW -96

Duowing – cutting dimensions for Magic Optima profile

Inside cabinet width = LW

Magic Optima Smart Board Magic Optima profile holder for Variowing

Magic Optima divider profile

Dynamic XP drawer runners

Pot drawer with Variowing and Magic Optima dividing system

Railing for suspension files

Optima profile for Railing

Dividinag systems

Add-on systems

Magic Optima set with Duowing

Drawers Pot drawers

Magic Optima set with Variowing

X = LW -96

Duowing – cutting dimensions for Magic Optima profile

Inside cabinet width = LW

Magic Optima Smart Board Magic Optima profile holder for Duowing

Magic Optima divider profile

Optima profile Duowing

X = LW -96 All dimensions in millimetres.

Technical Information

Application examples

Pot drawer with Duowing and Magic Optima dividing system

Accessories Assembly aids

Optima profile for Variowing

DWD XP Magic Classic Dividing system for Duowing and Solowing add-on system.

• • •

Can be fitted without tools Rapid installation and can be retrofitted any time Variable use of space

Magic Classic dividing set Cabinet width (cabinet side S16)

Item No. alu-metallic

600

12700.495.17

1200

12700.1095.17

PU/packaging unit

PU 1/25

PU 1/25 = 1 set per bag / 25 sets per carton 1 set for cabinet width 600 consists of: 2 lengthwise rails, 2 cross rails, 4 cross fittings 1 set for cabinet width 1200 consists of: 3 lengthwise rails, 2 cross rails, 6 cross fittings

Magic Classic Smart Board Item No. alu-metallic 12521.17 PU/packaging unit

PU 20

PU 20 = 20 pieces

DWD XP Duowing

page 28

Assembly aids

page 50 – 55

DWD XP Solowing

page 30

Technical information

page 64 – 67

System information Cutting dimensions for Magic Classic cross rail with Duowing

Inside cabinet width = LW

Magic Classic with Solowing

Drawers Pot drawers

Magic Classic with Duowing

Pot drawer with Duowing and Magic Classic dividing system 2 Smart Board

1 Dividing set

Divider rail for Classic

Dividinag systems

Add-on systems

X = LW -92

Cutting dimensions for Magic Classic cross rail with Solowing

Pot drawer with Solowing and Magic Classic dividing system 2

Smart Board

Dividing set

Railing for suspension files

Inside cabinet width = LW

Dynamic XP drawer runners

Accessories Assembly aids

Divider rail for Classic X = LW -72 Cutting dimensions for Magic Classic lengthwise rail with Duowing and Solowing

NL = Nominal length of runner Side Rail Duowing and Solowing Y = NL -38 All dimensions in millimetres.

Technical Information

Application examples

DWD XP dividing rail and bottle holder for pot drawer with railing.

•

• • •

Individual organisation of the available space for a clear and tidy arrangement of drawer contents Quick fitting without tools Can be fitted to existing drawers Adjust without tools, variable use of space

Dividing rail tube Cabinet width (cabinet side S16)

Item No. alu-metallic

Item No. nickel-plated

600

13201.487.17

1200

13201.1087.17

13202.1087.15

PU 20

PU 100

PU 20

PU/packaging unit PU 20 = 20 pcs. loose in carton PU 100 = 100 pcs. loose in carton

Holder for single dividing rail Item No. alu-grey Single

13611.32

PU/packaging unit

PU 200

PU 200 = 200 pieces loose

Holder for double dividing rail Item No. alu-grey Double

13621.32

PU/packaging unit

PU 100

PU 100 = 100 pieces loose

Bottle holder Item No. alu-grey 13631.32 PU/packaging unit

PU 100

PU 100 = 100 pieces loose

DWD XP pot drawer

page 14

DWD XP screw-on railing

page – 22

Assembly aids

page 50 – 55

DWD XP steel drawer backs

page 20

DWD XP quick-fit railing

page – 24

Technical information

page 64 – 67

Mounting positions

System information

Cutting dimensions for dividing rail Inside cabinet width = LW

Drawers Pot drawers

Drawer back width = LW -74

Ă&#x2DC; 3,5 x 15 Wood screw

Add-on systems

164

min. 145

Dividing Rail Length = LW -80

Railing for suspension files

21.5 Bottom width = LW -74

Bottom overlay

Dividinag systems

min. 55

Ă&#x2DC; 10 x 12 for dowelsl

Side overlay

Dynamic XP drawer runners

Railing with single and double dividing rail

1 Dividing rail 2 Holder for single dividing rail

Bottle holder

All dimensions in millimetres.

Technical Information

Application examples

Accessories Assembly aids

3 Holder for double dividing rail

DWD XP railing for suspension files.

•

• •

Strong and high load-bearing capacity due to secure screw fixing to front panel and drawer back Easy incline adjustment of front panel Oval aluminium tube with strong bending resistance, natural anodized

Railing set for DWD-Dynamic-XP suspension files Nominal length (NL)

Item No.

500

3595.500.22

550

3595.550.22

PU/packaging unit

PU 1/20

PU 1/20 = 1 set per bag/20 sets per carton One railing set consists of: 2 railings, 2 front fixings, 2 drawer back holders, 2 front fixing covers

DWD XP pot drawer

page 14

DWD XP screw-on railing

page – 22

Assembly aids

page 50 – 55

DWD XP steel drawer backs

page 20

DWD XP quick-fit railing

page – 24

Technical information

page 64 – 67

Mounting positions

Drawer back

330 = A4

245 Drawer back height

Inside cabinet width = LW Drawer back width = LW -74

System information

Cutting dimensions based on 16 mm particle board

Panhead screw Ø 3.5 x 15

Add-on systems

Bottom

Bottom length NL -9

Drawers Pot drawers

Drawer back width LW -74

Dividinag systems

245

206

Bottom width LW -74

Ø 3,5 x 15 Wood screw

Bottom overlay

Accessories Assembly aids

Side overlay

Adjusting the front panel

330

Application examples

A4 =

Adjustment screw

Adjust the inclination of the front panel by turning the adjustment screw.

All dimensions in millimetres.

Technical Information

21.5 Bottom width = LW -74

Dynamic XP drawer runners

min. 55

Railing for suspension files

Ø 10 x 12 for dowels

Dynamic XP full-extension runner, 40 kg with integrated Soft-close.

•

• • • •

Synchronised full-extension runner for drawers and pot drawers Integrated Soft-close technology Excellent running characteristics Small drop values Good lateral stability

softclose 1

Dynamic XP full-extension runner, 40 kg, with integrated Soft-close Nominal length (NL)

Item No.

275

6500.275.5

6505.275.5

350

6500.350.5

6505.350.5

400

6500.400.5

6505.400.5

450

6500.450.5

6505.450.5

500

6500.500.5

6505.500.5

550

6500.550.5

6505.550.5

PU 1

PU 20

PU/packaging unit

PU 1 = 1 set / full-extension runner, 40 kg, left and right-handed in carton PU 20 = 20 40 full-extension runners, 40 kg, left and right in separate cartons

Nominal length 300 mm on request

DWD XP drawer

page 10

Assembly aids

page 50 – 55

DWD XP pot drawer

page 14

Technical information

page 64 – 67

Mounting positions

System information

Mounting positions for cabinet slides Front edge of cabinet 2 mm set back

Inside cabinet width = LW

Drawer back width = LW -74

Ø 3,5 x 15 Wood screw

400

min. 49

350

450

500

Bottom width = LW -74 Side overlay

96 128 192 224

Dividinag systems

21.5

Bottom overlay

550

Add-on systems

min. 55

Ø 10 x 12 for dowels

Drawers Pot drawers

275

Special Euro screw Ø 6.3 x 14 mm Particle board screw Ø 3.5 x 15 mm

Minimum installation depth = NL

Railing for suspension files

NL = Nominal length

Front edge of cabinet 2 mm set back 18 9

Dynamic XP drawer runners

Full-extension runner 40 kg

1 Dynamic XP full-extension runner, 40 kg, Soft-close

All dimensions in millimetres.

Technical Information

Application examples

Accessories Assembly aids

Dynamic XP full-extension runner, 60 kg with integrated Soft-close.

•

• • • •

Synchronised full-extension runner for drawers and pot drawers Integrated Soft-close technology Excellent running characteristics Small drop values Good lateral stability

softclose 1

Dynamic XP full-extension runner, 60 kg, with integrated Soft-close Nominal length (NL)

Item No.

450

6510.450.5

6515.450.5

500

6510.500.5

6515.500.5

550

6510.550.5

6515.550.5

600

6510.600.5

6515.600.5

650

6510.650.5

6515.650.5

PU 1

PU 20

PU/packaging unit

PU 1 = 1 set / full-extension runner, 60 kg, left and right-handed in carton PU 20 = 20 full-extension runners, 60 kg, left and right-handed in separate cartons

Dynamic XP full-extension runner 80 kg on request.

DWD XP drawer

page 10

Assembly aids

page 50 – 55

DWD XP pot drawer

page 14

Technical information

page 64 – 67

Mounting positions

System information

Mounting positions for cabinet slides

Front edge of cabinet

Inside cabinet width = LW

2 mm set back

Drawer back width = LW -74

Add-on systems

600

550

min. 49

500 Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels

min. 55

Drawers Pot drawers

450

650 37

Bottom width = LW -74 Side overlay

352 384

Dividinag systems

21.5

Bottom overlay

192 224

Special Euro screw Ø 6.3 x 14 mm Particle board screw Ø 3.5 x 15 mm

Minimum installation depth = NL

Railing for suspension files

NL = Nominal length

Front edge of cabinet 2 mm set back 18 9

Dynamic XP drawer runners

Full-extension runner, 60 kg

1 Dynamic XP full-extension runner, 60 kg, Soft-close

All dimensions in millimetres.

Technical Information

Application examples

Accessories Assembly aids

Dynamic XP Tipmatic Plus full-extension runner, 40 kg Opens and closes drawers and pot drawers without handles.

• • • • • • • •

Lightly tap anywhere on the front panel to trigger the opening of the drawer Optimum access to the drawer contents due to fully extended drawer Unique, purely mechanical function Latch function guarantees gentle and secure closing Precise adjustment of the front gap (4 mm) by vertical adjustment on both sides No modification of drawer required Can be used for all cabinet widths and side thicknesses Use standard drilling layout for fitting

tipmatic-plus 1

Dynamic XP Tipmatic Plus full-extension runner, 40 kg Nominal length (NL)

Item No.

275

6400.275.5

350

6400.350.5

400

6400.400.5

450

6400.450.5

500

6400.500.5

550

6400.550.5

PU/packaging unit

PU 1

PU 1 = 1 set / full-extension runner, 40 kg lh and rh in carton including fitting instructions Dynamic XP Tipmatic Plus drawer runner, 40 kg, NL 500 in PU 5 on request Dynamic XP Tipmatic Plus drawer runner, 60 kg, NL 500, 600, 650 on request

Tipmatic Plus locking set Item No. 6440 PU/packaging unit

PU 1/20

PU 1/20 = 1 locking set lh/rh and 2 connecting levers per bag, 20 sets per carton

Tipmatic Plus connecting rod for cutting to size Cabinet width (cabinet side S16) 1200 PU/packaging unit

Item No. 6430.1070.5 PU 10

PU 10 = 10 connecting rods for cutting to size

Front buffer for Tipmatic Plus Item No. 68399-42 PU/packaging unit

PU 100

PU 100 = 100 pcs. loose in bag

DWD XP drawer

page 10

Assembly aids

page 50 – 55

DWD XP pot drawer

page 14

Technical information

page 64 – 67

Mounting positions

System information

Mounting positions for cabinet slides Front edge of cabinet

Inside cabinet width = LW

2 mm set back

Drawer back width = LW -74

Drawers Pot drawers

400

450

350

Bottom width = LW - 74

21.5

550 37

NL = Nominal length

Dividinag systems

128 192 224

Minimum installation depth = NL+24

Dimension for connection rod

Add-on systems

500

Min. installation depth = NL +24

Special Euro screw Ø 6.3 x 14 mm

Front buffer

Railing for suspension files

0,8 8

Particle board screw Ø 3.5 x 15 mm

Front edge of cabinet 2 mm set back

LW - 97 Ø 5,2 (Bore hole Ø5)

18 14

Dynamic XP Tipmatic Plus full-extension runner, 40 kg

Dynamic XP drawer runners

We recommend Euro screws for fixing to the cabinet.

2 Connection lever

Connection rod

Dynamic XP Tipmatic Plus, 40 kg

Application examples

Accessories Assembly aids

2 Locking device

Front buffer

All dimensions in millimetres.

Technical Information

min. 55

min. 49

275

Accessories for DWD XP.

Front-bottom connector

x = drawer front overhang

For a solid connection between Item No. Item No. bottom and front. 26744-09 26744-38 Allows subsequent adjustment PU 100 PU 10 of the front panel (horizontally PU/packaging unit 100 = 100 sets and vertically) Recommended for drawers from cabinet width 800 mm

Punch

Punch for front-bottom connector.

Item No. 94030 PU 1 PU/packaging unit 1 = 1 piece

DWD XP drawer

page 10

DWD XP pot drawer

page 14

Technical information

page 64 â&#x20AC;&#x201C; 67

For drilling the bottom of wide drawers and using the Grass front-bottom connector

System information

Drilling jig for front-bottom connector Item No. 94770 PU 1

Drawers Pot drawers

PU/packaging unit 1 = 1 set

Add-on systems

Drilling jig set for front-bottom connector, consisting of: 1 x drill head 1 x punch 1 x drill bit 15 mm 1 x drill bit 8 mm 1 x hexagonal bit 1 x Allen key 3 mm

Dividinag systems

1 x Allen key 4 mm

Dynamic XP drawer runners

Railing for suspension files

Use drilling jig for front-bottom connection

DWD XP drawers

page 10

DWD XP pot drawers

page 14

Technical information

Technical Information

Application examples

Accessories Assembly aids

Drawer bottom drill holes for front-bottom connector

page 64 â&#x20AC;&#x201C; 67

Accessories for DWD XP.

DWD XP spacer 25 mm

For internal drawers behind a door in order to bridge the door gap. Can be installed at left or right. Secure fastening of the Dynamic XP full-extension runners with load-bearing capacity of 40 kg.

Item No. alu-grey 6975 PU 50 PU/packaging unit 50 = 50 sets 1 set consists of: 1 spacer back and front, 4 special Euro screws

DWD XP child lock

Easy and quick to fit. Concealed at the drawer bottom. Can be deactivated, simple operation. Can be taken off without leaving a trace.

Item No. alu-grey 6879.VE1 PU 1/100 PU/packaging unit 1/100 = 1 set in a plastic bag consisting of: Child lock, limit stop, screw / 100 sets in carton

DWD XP drawer

page 10

DWD XP pot drawer

page 14

Technical information

page 64 â&#x20AC;&#x201C; 67

Assembly aids for DWD XP.

Pneumatic mounting clamp for quick assembly of DWD XP drawers and pot drawers

System information

DWD XP pneumatic mounting clamp Item No. 6930 PU 1

Drawers Pot drawers

PU/packaging unit 1 = 1 pc. in carton

Conversion set Agantis for DWD XP pneumatic mounting clamp Item No.

Add-on systems

6931 PU 1 PU/packaging unit 1 = 1 set 1 Set consists of: 1 stop fitting and 1 cylinder per carton Min. order quantity = 1 set

Dividinag systems

Quick change-over from DWDDynamic-XP to DWD XP Agantis, without tools. Conversion set required to assemble DWD XP and DWD XP Agantis for machine numbers 001 to 276, 279 to 282, 288, 297 to 300

For the rapid assembly of DWD-

Item No.

Dynamic-XP and DWD XP Agan-

95601

tis drawers and pot drawers up

PU 1

to a cabinet width of 1200mm.

Railing for suspension files

ZMV-fix semi-automatic mounting clamp for DWD XP

PU/packaging unit 1 = 1 pc.

zmv-fix

Application You have two options for fitting the stop: Position A Centre of cabinet slide holes Position B Lower edge of DWD XP drawer side (55 mm below the fixing hole)

Item No. 94730 PU 1 PU/packaging unit = 1 set 1 set consists of:

Accessories Assembly aids

Dynamic XP drawer runners

DWD XP cabinet drilling jig

1 runner ruler, 4 stop elements, fitting instructions

For all cabinet slides. To be used in the assembled Use Ø 5 mm drill bit for 6 mm Euro screws.

Drill bit Ø 5 mm with collar for Euro screws

Drill bit Ø 5 mm

Application examples

cabinet with min. depth 350 mm.

Item No. 92594 PU 1

0 Position

DWD XP drawer

page 10

DWD XP pot drawer

page 14

Technical information

Technical Information

PU/packaging unit = 1 piece

page 64 – 67

Assembly aids for DWD XP.

DWD XP cabinet drilling jig

Drilling jig for cabinet slide of Dynamic XP full-extension runner and Dxnamic NT.

Item No. 6926 PU 1 PU/packaging unit 1 = 1 piece

Tipmatic Plus XP cabinet drilling jig

For Dynamic XP Tipmatic Plus full-extension runners NL 400 â&#x20AC;&#x201C; 550

0 40 NL 0 45 NL 0 50 NL 0 55 NL

Item No. 6923 PU 1 PU/packaging unit 1 = 1 piece

0 40 NL 0 45 NL 0 50 NL 0 55 NL

DWD XP marker jig set

Marker jig set for DWD XP front fixing 6850

Item No. 6920 PU 1 PU/packaging unit 1 = 1 set

DWD XP front drilling jig

Front drilling jig for DWD XP front fixing, railings and add-on systems

Item No. 6925 PU 1 PU/packaging unit 1 = 1 piece

DWD XP drilling jig for railing

Drilling jig for DWD XP railing

Item No. 6927 PU 1 PU/packaging unit 1 = 1 piece

DWD XP drawer

page 10

DWD XP pot drawer

page 14

Technical information

page 64 â&#x20AC;&#x201C; 67

Item No. 6915 PU 1 PU/packaging unit 1 = 1 piece

Drawers Pot drawers

Insertion ram for DWD XP dowels front fixing 6860 with Ecoflex drilling and insertion jig.

System information

Insertion ram

DWD XP knock-in tool

Knock-in tool for DWD XP front fixing with dowels 6860

Add-on systems

Item No. 6910 PU 1

Dividinag systems

PU/packaging unit 1 = 1 piece

Center drill bit Ø 3,5 mm

Center drill bit for pre-drilling countersink particle board screws Ø 3.5 mm.

Item No. 35692

Railing for suspension files

PU 1 PU/packaging unit 1 = 1 piece

Spare drill bit

Item No. 90561 PU 1

Dynamic XP drawer runners

PU/packaging unit 1 = 1 piece

Screw driver

Grass crosshead screwdriver (Pozidrive No. 2)

Item No. 10256-00

Accessories Assembly aids

PU 1 PU/packaging unit 1 = 1 piece

Wood screw, nickel-plated

Item No./Ø 6.3 x 10.5 mm

Item No./Ø 6.3 x 14 mm

Item No./Ø 3.5 x 15 mm

191

192

198

PU 1000

Application examples

Euro screw, nickel-plated

PU 1000 PU/packaging unit 1000 = 1000 pieces

Length

DWD XP drawer

page 10

DWD XP pot drawer

page 14

Ø 7.1

Technical information

Ø7

Technical Information

Ø 6.3

Ø 3.5

PU/packaging unit 1000 = 1000 pieces

page 64 – 67

DWD XP sink drawer Application example.

• • • •

Easy assembly with DWD XP standard products Variable width, variable cut As drawer or pot drawer All dividing systems fit Foldable steel drawer backs for sink cabinets. Widths 600, 800, 900 and 1200 on request.

Sink drawer - application example

Railing NL 500

DWD XP drawer sides NL 275 – 400 Wooden drawer back, variable width (steel drawer back from cabinet width 250)

Holder for high wooden drawer back H182

DWD XP drawer side NL 500

Dynamic XP full-extension runner, 60 kg

Front panel Front fixing Inset drawer front

DWD XP pot drawer

page 14

DWD XP screw-on railing

page 22

Assembly aids

page 50 – 55

DWD XP steel drawer backs

page 20

DWD XP quick-fit railing

page 24

Technical information

page 64 – 67

System information

Mounting positions

Inside cabinet width = LW B = E +31

A = D +31 Wooden drawer back width = D

Ă&#x2DC; 3,5 x 15 Wood screw

164

min. 145

Drawers Pot drawers

Wooden drawer back width = E

Add-on systems

Dividinag systems

Bottom overlay

21.5 Bottom width = LW -74

D (variable dimension)

Interior front

Dynamic XP drawer runners

Bottom length = NL -9

Cut out measurement = NL - 9

E (variable dimension)

Railing for suspension files

Side overlay

Accessories Assembly aids

Bottom

Bottom width = LW -74

21.5

Bore hole centre distance (Inside front) = LW -43 -A -B

21.5

All dimensions in millimetres.

Technical Information

Application examples

Cutting dimensions for inside front

min. 73

min. 55

Ă&#x2DC; 10 x 12 for dowels

DWD XP oven base drawer Application example.

Oven base drawers matching the Dynamic XP full-extension runners with 40 kg load-bearing capacity Ninka "Oven-base drawer 2010” Nominal length 500/cabinet width 600 mm Elco “Top Volume” Nominal length 500/cabinet width 600 mm Height 170 and 220 mm

Dynamic XP full-extension runner, 40 kg see page 44

Dynamic XP full-extension runners, 40 kg page 44

Assembly aids

page 50 – 55

Technical information

page 64 – 67

Spacer for DWD XP oven base drawer.

Add-on systems

Drawers Pot drawers

System information

Spacer 2 mm thick for compensation of cabinet thickness S16 to S18 with Dynamic XP full-extension runners.

Dividinag systems

DWD XP spacer 2 mm Item No. 6976.VE4 PU 1

Dynamic XP drawer runners

Railing for suspension files

PU 1 = 4 pcs. in bag

Accessories Assembly aids

Mounting positions

All dimensions in millimetres.

Technical Information

Application examples

DWD XP large-volume drawer for base applications.

• • •

•

pot drawer for 60 kg or 80 kg Independent of cabinet width Many organisation options using the add-on systems Variowing, Duowing and Solowing The drop at the front of the drawer in the open position is counteracted by a special level compensation device Depending on the load, it may be necessary to push the drawer manually into the closed position

Large-volume drawer sides Nominal length (NL) 500

Item No. alu-metallic 6980.500.17

PU/packaging unit

PU 2/20

PU 2/20 = 2 pcs. / 20 pcs. per carton (each pot drawer requires 2 pieces)

Level compensators Item No. 6985.VE1 PU/packaging unit

PU 1

PU 1 = 1 set lh and rh, including 2 limit pins

The following items are needed for a large-volume drawer: 2 DWD XP large-volume drawer sides (6980.500.17) 1 set DWD XP level compensator (6985.VE1), incl. 2 limit pins 1 set DWD XP drawer sides H95 alu-metallic 1 set DWD XP wooden drawer back holder H182 1 set DWD XP railing (screw-on or quick-fit) 2 DWD XP front panel holders (screw-on or dowel fixing) 5 cuts to the wood (as per instructions)

DWD XP pot drawer

page 14

DWD XP screw-on railing

page 22

Assembly aids

page 50 – 55

DWD XP steel drawer backs

page 20

DWD XP quick-fit railing

page 24

Technical information

page 64 – 67

min. 504

System information

Mounting positions

Drawers Pot drawers

1,5

352

Add-on systems

max. 75

min. 5

Dividinag systems

(2)

Railing for suspension files

DWD XP large-volume drawer

Dynamic XP drawer runners

Requirements for installation:

Screw-on or quick-fit railing

DWD XP large-volume drawer side

Application examples

Front fixing bracket

Accessories Assembly aids

Maximum plinth recess 75 mm Minimum plinth height 120 mm Maximum weight of front panel 1.6 kg Height of plinth panel = plinth height minus 21 mm Sides of cabinet continuous from the floor up

DWD XP drawer side

Dynamic XP full-extension runner, 60 kg

Level compensator All dimensions in millimetres.

Technical Information

approx.10

(2)

min. 21 H =Y - 23 Y = min. 120 224

131

X= 244 - Y

37 27

450

224

DWD XP pull-out crockery cabinet Application example.

Wide pull-out cabinet, equipped with inset drawers, inset pot drawers with rails and shelves in the top area.

•

Provides lots of storage space for large and bulky items

•

With the Magic Optima dividing system stored items stay in their place

•

Drawers and pot drawers matching the Dynamic XP fullextension runners with 40, 60 and 80 kg load capacity

Example

Pull-out crockery cabinet, application example Example

Nexis Impresso 170° wide-angle hinge Nexis Click-on 170°wide-angle hinge •

Soft-close compatible

•

Zero protrusion

A B C D E

DWD XP inset drawer

page 12

DWD XP inset drawer with railing

page 16

A = Inset drawer, Dynamic XP 40 kg B = Inset drawer with railing and Duowing, Dynamic XP, 40 kg C = Inset drawer with railing and Duowing, Dynamic XP, 60 kg D = Inset drawer with railing and Duowing, Dynamic XP, 60 kg E = Inset drawer with railing and Duowing, Dynamic XP, 60 kg Recommended cabinet widths 800 – 1000 mm

Dynamic XP full-extension runners

page 44 – 49

Assembly aids

page 50 – 55

Technical information

page 64 – 67

DWD XP pull-out larder Application example.

System information

The flexible solution where some of the drawers and pot drawers are connected to the front.

With the Magic Optima dividing system stored items stay in their place

•

Drawers and pot drawers matching the Dynamic XP fullextension runners with 40 and 60 kg load capacity

Add-on systems

•

Drawers Pot drawers

The inner drawers and pot drawers can be moved freely and provide plenty of space for your food supplies.

Example

Dividinag systems

Pull-out larder, application example

Railing for suspension files

Example

Dynamic XP drawer runners

A B

C D

Accessories Assembly aids

A = Drawer H95 B = Inset drawer with railing C = Pot drawer with railing and Duowing D = Inset drawer E = Pot drawer with railing and Duowing A + C + E are connected to the front

All dimensions in millimetres.

Accessories and Assembly aids DWD XP drawers

page 10

DWD XP screw-on railing

page 22

Assembly aids

page 50 – 55

DWD XP pot drawers

page 14

DWD XP quick-fit railing

page 24

Technical information

page 64 – 67

Technical Information

Application examples

Recommended cabinet widths 300 – 400 mm

Technical information for DWD-Dynamic-XP.

Inserting the drawer

Place drawer onto extended slides.

Fitting the drawer front

Insert front holder into drawer side. Drawer front snaps shut automatically and is fixed.

Removing the drawer

Raise drawer slightly at the front and push fully home. The drawer will be locked into place automatically! Side adjustment

Turn screw (A). Due to the integrated lateral adjustment only the rh side has to be adjusted.

Removing the drawer front

Open drawer to about 10 cm before full-extension and raise slightly.

Vertical cam adjustment

Loosen fixing screw on both sides.

Adjust drawer front and tighten screws again.

Fitting instructions Expanding dowel Ă&#x2DC; 10 x 12 mm

Use Pozi No. 2 screwdriver to release locking mechanism.

Pull out sharply HORIZONTALLY until the drawer audibly disengages and then lift off.

Drawer front is unlocked and can be removed. Where a bottom-front connector has been used, release this connector!

Press-in dowel Ă&#x2DC; 10 x 12 mm

Front fastening with press-in dowels When using front fixings with press-in dowels, the holes in the front should be appropriately countersunk. The sharp edges produced when drilling into hard surface coatings, e.g. melamine, can damage some of the dowel ribs when they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, this does not require any countersinking and still guarantees optimum holding strength.

Installation

Insert quick-mounting railing into Ă¸ 10 mm hole.

Drawers Pot drawers

System information

Quick-fit railing

Click onto both sides of drawer back.

Dividinag systems

Add-on systems

Removing the railing

Remove railing from front panel.

Dynamic XP drawer runners

Fitting the railing

Click onto both sides of drawer back.

Accessories Assembly aids

Screw railing holder onto both sides of front panel and insert railing.

Application examples

Removing railing

Disengage railing from front panel holder.

Turn drawer back holder.

Technical Information

Screw-on railing

Turn drawer back holder.

Railing for suspension files

Release the clip at drawer back.

Release clip at the drawer back.

Technical information for DWD-Dynamic-XP.

Dimensions for drawer trays

1:1 dimensional diagram Dimensions to be used for trays in DWD XP drawers.

Dimensions for drawer trays

29.5 2.5

Inside cabinet width -59

85.5

Inside cabinet width -82

Bottom edge

41 Inside cabinet width Cabinet width

total weight

60 / 80 kg

System information

40 kg Durability test

60,000 open/close cycles

Drawers Pot drawers

100,000 open/close cycles

5 x 5 seconds, 2/3 extended, additional load on corner: 175 N

Add-on systems

Vertical load test

5 x 5 seconds, 2/3 extended, additional load on corner: 200 N

Dividinag systems

5 x 5 seconds, 2/3 extended, right/left alternating

kg Dynamic XP drawer runners

Railing for suspension files

Horizontal load test

Dynamic load on front panels and limit stops

Accessories Assembly aids

open and close 10 x at 0.55 metre/sec with 60 kg load open and close 10 x at 0.45 metre/sec with 80 kg load

Application examples

open and close 10 x at 0.6 metre/sec

Pull-out safety

open 10 x at 0.85 metre/sec with 60 kg load open 10 x at 0.75 metre/sec with 80 kg load Technical Information

open 10 x at 1.0 metre/sec

• Requirements

and limits according to internal guidelines loads apply up to nominal length of 500 mm • Loading reduces with increasing nominal length • Stated

Tel. +43 / 5578 / 701-0 Fax +43 / 5578 / 701-59 www.grass.at, info@grass.eu

Item No. F147071177000 – 12/08 – 5.000 (ENG) – GRASS Advertising Subject to changes, no liability for printing errors accepted

Grass GmbH Furniture fittings Grass Platz 1 A - 6973 Höchst Austria

Beslagsmix AB · Varlingsdalsgatan 6 · SE-567 33 Vaggeryd · Sweden Tel: (46) 036-18 02 70 · Fax: (46) 036-18 02 80 E-mail: info@beslagsmix.se · www.beslagsmix.se