Exterior TRIM Gaps show in exterior trim. (W-ET-1) Guideline: Joints between exterior trim elements, including siding and masonry, shall not result in joints opened wider than 1/4 inch. In al cases, the exterior trim shall perform its function of excluding the elements. EXCLUSION: The contractor will repair open joints that do not meet the performance guideline. Caulking is acceptable.
Exterior trim board is split. (W-ET-2) Guideline: Splits wider than 1/8 inch are considered excessive. EXCLUSION: The contractor will repair splits by filing with a durable filler. Touch-up painting may not match the surrounding area.
Exterior trim board is split. (W-ET-3) Guideline: Splits wider than 1/8 inch are considered excessive. EXCLUSION: The contractor will repair splits by filling with a durable filler. Touch-up painting may not match the surrounding area.
Exterior trim board is cupped. (W-ET-4) Guideline: Cups exceeding 3/16 inch in 5 1/2 inches are considered excessive. EXCLUSION: The contractor will repair defects that do not meet the performance guideline by refastening or replacing deformed boards. Touch-up painting may not match the surrounding area.
Exterior trim board is bowed or twisted. (W-ET-5) Guideline: Bows and twists exceeding 3/8 inch in 8 feet are considered excessive. EXCLUSION: The contractor will repair defects that do not meet the performance guideline by refastening or replacing deformed boards. Touch-up painting may not match the surrounding area.
Paint, Stain, and Varnish Exterior painting, staining, or refinishing is required because of repair work. (W-PSV-1) Guideline: Repairs required under these performance guidelines shall be finished to match the immediate surrounding areas as closely as practical. EXCLUSION: The contractor will finish repaired areas as indicated. Explanation: Touch-up painting, staining, or refinishing may not match the surrounding area.
66 | gr egw e l chcons t r uc t i on. com