Index
Lingotto
FLOODLIGHTS
design Renzo Piano
iGuzzini 03
• The fixture is installed into the ground or wall-mounted. • Lingotto has an optical assembly, a control gear box (for models with discharge lamps), and an arm. • Optical assembly and aluminium glassholding frame, especially designed for perfect coupling to the chassis, with dual phosphorus-chromium plating of the base metal, followed by passivation heat treatment at 120° C, grey painting, curing at 150° C. Sodium-calcium tempered sealing glass, colourless and transparent. An articulated joint is used to adjust the vertical orientation of the cover with 180° range, and the horizontal orientation with 360° range. Steel retention cable, diameter of 1,6 mm, plastic-coated. 50 Shore silicone-coated black gasket; parabolic reflector made of aluminium sheet with a high-bright natural finish. An optional painted aluminium control gear box is connected to the optical assembly by a armoured braided steel code
lamp
Floodlight - Large optical assembly 7019 250 W Fc2 HIT-DE 250 W Fc2 HST-DE 7029 250 W Fc2 HIT-DE 250 W Fc2 HST-DE 7020 400 W Fc2 HIT-DE 7030 400 W Fc2 HIT-DE
• • • • • • •
The luminous flux emitted upwards by the Lingotto luminaire pointing downwards with 0 angle is null. The luminaire conforms to the requirements in UNI 10819 norm concerning zone 1 (light pollution).
colour
code
A
73
Floodlight - Small optical assembly 7012 150 W Rx7s HIT-DE 150 W Rx7s HST-DE
F
73
A F
73 73
lamp
IP66 IK07
HIT-DE
optic
colour
F
73
HIT-DE
HST-DE
The electrical connections between the control gear box and the floodlight are achieved through an armoured cable. HST-DE
310
680
600
IP66 IK07
optic
•
cable. Polymeric grey plastic PG11 cable clamp and brass PG11 on the other end. Pull-out aluminium control gear plate, subjected to a pre-anodizing and degreasing treatment; power supply with a non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals. All screws are A2 stainless steel. Rod with wishbone end and greypainted galvanized steel articulated joint. The technical characteristics of the fitting comply with EN60598-1 standard. IP66 IK07 F seal ENEC approval Class of Insulation II
147 695
350
120
230
Floodlight - Small optical assembly 7017 150 W Rx7s HIT-DE 150 W Rx7s HST-DE 7027 150 W Rx7s HIT-DE 150 W Rx7s HST-DE
A F
Floodlight - Small optical assembly 7013 300 W R7s QT-DE
73 73
IP66 IK07
Complete with electrical wire L=600 mm HIT-DE
HST-DE
260
680
500
IP66 IK07
147 180
120
270
695
Floodlight - Small optical assembly 7018 300 W R7s QT-DE 7028 300 W R7s QT-DE IP66 IK07
240
Complete with electrical wire L=450 mm
170
270
215
304
A F QT-DE
73 73
F QT-DE
73