The Power, Signal & Clip indicator LED’s monitor the proper working of the integrated amplifier. The optional VC4008 wall volume controller has to be connected to the remote RJ45 connection. This makes it possible to control the general volume level. The volume of the satellite channels can be controlled using the ‘Volume Satellite’ control knob. The volume of the subwoofer channel can be controlled using the ‘Volume Subwoofer’ control knob. The balanced input connections are made by means of 3-pin euro terminal blocks. The amplified satellite output connections are made by means of 4-pin euro terminal blocks. This allows you to connect two satellite speakers on every output channel. Due to the high efficiency of the integrated class H amplifier, the SX408A is completely passively cooled by means of the large ribbed aluminium heatsink on the back.
Rear panel overview
VC3208
Remote volume controller
The VC3208 is a flush mount wall controller for volume regulation of voltage controlled (0 ~ 10 Volts) amplifiers such as SX408A and AMP20. The volume is fluently controllable using the rotatable dial with potentiometer. The connection between the amplifier and the regulator is made using twisted pair CAT5e (or better) cabling fitted with an pluggable terminal block connector. It is compatible with standard 45 x 45 mm installation materials such as AUDAC, Niko, Legrand, .... .
Available in black (B) and white (W)..
Internal schematic 2 x 100 Watt @8Ω
Auto Power Switch Balanced Signal Input
Left
Master Volume Control
VC3208
Limiter
Class H
Active Right Crossover Network
Limiter
Class H
Subwoofer
Limiter
Class H
2 x 160 Watt @4Ω
8" Woofer 100 Watt
65