Drinkable water Flexible water tanks for fresh water The Plastimo high resistance flexible water tanks are a reliable, practical and low cost solution to the storage of fresh water on board.They are flexible, light and form-fitting, and can therefore be installed where it would not be possible to install a rigid water tank, due to the shape of the boat or difficult access. The double envelope principle makes maintenance easy, as the inner chamber can be easily removed from the outerenvelope for routine cleaning and examination.
Tested and patented : a water chamber inside a tough envelope. The Plastimo water tanks consist of a welded non-porous tasteless PVC water chamber (inner bladder) inside a tough nylon envelope, for complete watertightness and resistance to tearing and abrasion.
BISPHENOL A FREE
Shape of tank
Capacity
Watertank, complete
Spare inner bladder
Square
50 L 100 L 150 L 200 L
18031 18033 16656 16657
18032
120 L
16658
16665
Rectangular Triangular (Ideal for front cabin)
16661 16663 16664
Water tanks are supplied complete, ready to install, with Ø 38 mm inlet fitting and Ø 12 mm outlet valves.
Accessories Outlet valve, situated on underneath side of tank. 120 L Ø 38
70 cm
50 L
Ø 12
Ø 38 70 cm
Ø 12
115 cm
100 L
105 cm
150 L
140 cm
200 L
175 cm
Ø 38 mm inlet valve is situated on upper side of tank ; Ø 12 mm outlet valve is situated on underneath side of tank. (except on triangular model : inlet and outlet are both on upper side of tank). Height of tanks, when filled to capacity : 25 cm.
• Male connector Ø 15 mm for quick-fit plumbing :
51643 Connector in polypropylene, supplied with nut and ring. • Spare set of elbow connectors : 19265 Ø 38 mm inlet fitting and Ø 12 mm outlet valve
105 cm 223