Wireless Solution Kit for Analogue & Discrete Devices
Easy steps to connect your analogue signal to the wireless node 1. Current cabled solution or
or
2. Connect your analogue signal to the wireless node
3. Connect the analogue output of the wireless gateway to your PLC (Or connect the serial output to your SCADA system)
or
or
4. Done! or
or
www.bannerengineering.com/eu
Simple Wire Replacement with DX80 Premapped I/O Kit (1x Gateway + 1x Node) with 4 discrete & 2 analogue I/O: DX80...-PM2 Discrete and analogue I/O: 4 DO 4 DI 2 AO 2 AI
N
GW
Node
Gateway
4 DI 4 DO 2 AI 2 AO Modbus RTU
Discrete IN: 4x PNP-NPN (selectable) Discrete OUT: 4x PNP Analogue IN: 2x 0-20 mA Analogue OUT: 2x 0-20 mA Kit model number: DX80K2M6-PM2
Kit (1x Gateway + 1x Node) with 12 discrete I/O only: DX80...-PM8 Discrete I/O only: 6 DO 6 DI
N
GW
Node
Gateway
Discrete IN: 6x PNP
6 DI 6 DO Modbus RTU
Discrete OUT: 6x PNP Kit model number: DX80K2M6-PM8
More expansion capabilities, using multiple nodes 2 DO 2 DI 1 AO 1 AI
GW
N
2 DO 2 DI 1 AO 1 AI
4 DO 4 DI 2 AO 2 AI
4 DI 4 DO 2 AI 2 AO Modbus RTU
4 DO 4 DI 2 AO 2 AI
N
Modbus RTU
GW
N
N
Up to 47 nodes
4 DO 4 DI 2 AO 2 AI
N
or
4 DO 4 DI 2 AO 2 AI
2 DO 2 DI 1 AO 1 AI
GW N1
Repeater 2 DO 2 DI 1 AO 1 AI
N3
N2
Various configurations are possible. Hardware can limit the number of physical I/O's available. Virtual I/O's are available trough Modbus registers.
• • • • • • • • •
DI1 DI2 DI3 DI4 AI5 AI6 V+ VV-
D09 D010 D011 D012 A013 A014 Tx/+ Rx/V+
• • • • • • • • •
DX80PM premapped – 2.4 GHz – 12 to 24 VDC, ±10% – IP 67 rated Mixed discrete and analogue I/O DX80...-PM2 DX80G2M6S-PM2
Gateway
DX80N2X6S-PM2
Node
Discrete I/O only DX80...PM8 DX80G2M6S-PM8
Gateway
DX80N2X6S-PM8
Node
EN F205 – 05/16
Kit (1 GW + 1 Node)
Discrete I/O
Analogue I/O
IN
OUT
IN
OUT
DX80K2M6-PM2
4x PNP-NPN (selectable)
4x PNP
2x 0-20 mA
2x 0-20 mA
Kit (1 GW + 1 Node)
IN
OUT
IN
OUT
DX80K2M6-PM8
6x PNP
6x PNP
/
/
www.bannerengineering.com/eu