Trade Nailers
AT2564MN Masonry Nailer 25 - 64mm Strong as a rock and hard as nails. An impressive air operated masonry nailer which will drive hardened nails with ease into a whole variety of hard surfaces such as brick, light concrete, insulating blocks, screed and plaster. The range of nail length, from 25mm to 64mm and the 80 nail capacity quick loading magazine make it a natural for second fix work. There is the usual safety latching system and the air exhaust outlet directs the exhaust to the front. Light in weight, safe to use and extremely reliable, this nailer can save a huge amount of time on site as so many tasks can be done with just one tool. The tool has a 1/4” BSP female inlet. Air Consumption 5 cfm / 141.6 l/m Operating Pressure 85 to 115 psi / 5.9 to 7.9 bar Inlet 1/4” BSP Load Capacity 80 nails Weight 3.2 kg
AT1550FN Finish Nailer 15 - 50mm A top quality trade rated finishing nailer for both interior and exterior use.
AT2564MN Masonry Nailer 25 - 64mm 38mm Nails (Qty 1,000) 45mm Nails (Qty 1,000) 50mm Nails (Qty 1,000) 64mm Nails (Qty 1,000)
Inc.vat £119.50 £10.99 £13.25 £14.35 £17.70
Ex.vat £99.58 £9.16 £11.04 £11.96 £14.75
Code 106165 900127 900128 900130 900136
Air Consumption Operating Pressure Inlet Load Capacity Overall L x W x H Weight
AT2050BN Brad Nailer 20 - 50mm Ideal for panel and cabinet assembly.
4.5 cfm / 127.4 l/m 70 to 120 psi / 4.8 to 8.3 bar 1/4” BSP 100 nails 2.1 kg
7 cfm / 198.2 l/m 70 to 120 psi / 4.8 to 8.3 bar 1/4” BSP 100 nails 345 mm x 120 mm x 305 mm 2.53 kg
AT1550FN 15g Finish Nailer 15 - 50mm 32mm Nails (Qty 4,000) 38mm Nails (Qty 4,000) 44mm Nails (Qty 4,000) 50mm Nails (Qty 4,000)
This medium weight trade-rated nail gun fires 16 gauge T-headed brad nails from 20mm to 50mm in length. With its low air consumption, this nailer can be used with any of the smaller 25 litre capacity compressors. It can be used with standard trigger firing or in bump mode where, with the trigger engaged, a nail is delivered each time the safety stop is depressed, useful for fast fixing. The gun is easy to load and the handle has a high grip rubber covering. An adjustable exhaust air outlet means that the exhaust can be directed to where convenient. A 1/4” BSP quick release male bayonet fitting is provided. Supplied in a plastic storage case. Air Consumption Operating Pressure Inlet Load Capacity Weight
The non-marking tip device and the adjustable depth control make it just as good for fine furniture and upholstery work as it is for battening and framing. Easy loading of nails into the rear entry angled magazine coupled with the powerful nailing action make this a real time saver on site. The swivelling exhaust deflector and rubber grip handle makes for comfortable use. The nails are 34°, 15 gauge (1.8mm) with 3mm heads. The nailer will take nails with a minimum length of 15mm and a max of 50mm. The tool has a 1/4” male bayonet fitting. Supplied in a plastic storage case.
AT2050BN 16g Brad Nailer 20 - 50mm 25mm Nails (Qty 2,500) 32mm Nails (Qty 2,500) 38mm Nails (Qty 2,500) 50mm Nails (Qty 2,500)
Inc.vat £109.96 £6.50 £7.75 £9.00 £11.70
Ex.vat £91.63 £5.42 £6.46 £7.50 £9.75
Inc.vat £132.95 £32.65 £39.40 £46.15 £59.99
Ex.vat £110.79 £27.21 £32.83 £38.46 £49.99
Code 106166 114014 114015 114016 114017
Code 106164 340317 340326 340330 340344
AT1550BN Brad Nailer 15 - 50mm
AT1220HP Headless Pinner 12 - 20mm
Lightweight, trade rated brad nail gun.
Lightweight and comfortable for all day use.
The most popular air nailer in our range, this lightweight trade-rated nailer fires 18 gauge T-headed brad nails from 15mm to 50mm in length and with its low air consumption can be used with any of the smaller 25L capacity compressors. It can be used with standard trigger firing or in bump mode where, with the trigger engaged, a nail is delivered each time the safety stop is depressed, useful for fast fixing. The gun is easy to load and has a re-load sight so that the operator can see when the magazine is empty. Other useful features are the depth adjustment which controls the depth to which the nail is driven, the adjustable air exhaust outlet and the quick release front cover to give easy access for clearing jammed nails. A 1/4” BSP male bayonet fitting is provided. Supplied in a plastic storage case. Air Consumption 4.5 cfm / 127.4 l/m Operating Pressure 60 to 95 psi / 4.1 to 6.6 bar Inlet 1/4” BSP Load Capacity 100 nails Weight 1.4 kg
This pinner drives 24 gauge headless pins from 12mm to 20mm long, is great for furniture, mouldings, decorative trim and glazing beads. It has a 1/4” BSP female fitting and is suitable for use with smaller compressors. Supplied with a 1/4” BSP Quick Release bayonet fitting. Details of suitable airlines and fittings can be found in the Airline Fittings section.
AT1550BN 18g Brad Nailer 15 - 50mm 15mm Nails (Qty 5,000) 20mm Nails (Qty 5,000) 25mm Nails (Qty 5,000) 30mm Nails (Qty 5,000) 35mm Nails (Qty 5,000) 40mm Nails (Qty 5,000) 50mm Nails (Qty 5,000)
Inc.vat £64.96 £4.50 £5.99 £7.20 £8.95 £10.00 £11.20 £13.96
Ex.vat £54.13 £3.75 £4.99 £6.00 £7.46 £8.33 £9.33 £11.63
Code 106163 340346 340347 340348 340349 340350 340351 340352
4 cfm / 113.3 l/m 95 psi / 6.6 bar 1/4” BSP 100 nails 0.8 kg
Air Consumption Operating Pressure Inlet Load Capacity Weight AT1220HP 24g Headless Pinner 12 - 20mm 12mm Pin (Qty 10,000) 15mm Pin (Qty 10,000) 18mm Pin (Qty 10,000) 20mm Pin (Qty 10,000)
Join our email club - the best way to get deals, news and much more from Axminster
Inc.vat £41.35 £5.60 £6.95 £8.30 £9.55
Ex.vat £34.46 £4.67 £5.79 £6.92 £7.96
Code 106162 502472 502473 502474 502475
99