Stay in line with guide clamps Simple to use, clamp onto a workpiece and guide your power tool to create perfectly straight edges and accurate cuts. Progrip Clamp Most everyday power tool sawing or routing tasks involve cutting a straight line. There is always the problem of how best to guide the tool along a straight cutline. These guide clamps are an accurate alternative to using a straight bit of scrap wood and a couple of G-clamps, which will inevitably get in your way. Offering a versatile and secure method for guiding routers, circular saws and jigsaws, the UJK Progrip guide clamps are a purpose-made and obstruction-free solution. A positive clamping mechanism sits below the top of the clamp. It has three progressive clamping pressures, allowing for final positioning before locking. The clamp applies significant pressure ensuring the guide clamp will not move in use. The guide is made of rigid extruded aluminium profile. Code 610mm(24”) £29.99 £24.99 103383 915mm(36”) £36.76 £30.63 103384 1,270mm(50”) £45.60 £38.00 103385
Positive clamping mechanism with three progressive pressures
Featherboard Minimise movement and keep those fingers safe.
90° Head
Featherboards hold the wood against the fence and the table and ensure that your workpiece doesn’t move about when in use. What’s more, they add another element of safety as they help to keep your fingers away from the router cutter. They feature adjustable, anti-kickback ‘fingers’ which serve as springs. This prevents any movement or bounce back, reducing the risk of injury. For additional safety in your workshop, it’s advisable to set up a number of featherboards against the table and the fence. Inc.vat Ex.vat Code Featherboard £10.50 £8.75 103657
Turn your Progrip guide clamp into a T-square.
246
The 90° head fits around the Progrip’s fixed clamp head; the lugs on the moulding ensure correct alignment and are fastened securely with two screws. Attaching the 90º head greatly reduces the time taken to set up a square crosscut and also turns the guide clamp into a large square for marking out. The body is a strong glass fibre reinforced ABS moulding with a 175mm long face, 12mm deep. The textured face prevents slippage. Inc.vat Ex.vat Code 90° Head £6.40 £5.33 103889
Back To Back Adaptor Clamp work directly to your workstation. Using a pack of adaptors you can turn two pairs of clamps into an effective holding device. You can grip panels of sheet material across the top of your bench. The lower clamp grips your bench, while the upper clamp holds the workpiece. Adaptors are supplied as a pack of eight. Inc.vat Ex.vat Code Back To Back Adaptors (Pkt 8) £12.65 £10.54 103656
All intellectual property rights belong to Axminster Tool Centre Ltd. Any infringements will be taken seriously.