Table Saw Accessories UJK Technology Precision Mitre Gauge & Fence A precise mitre fence for a host of machines. This mitre gauge is suitable for use on machines with smaller tables. For example, used on a disc sander this would give you the option of a sliding fence or a fixed angle fence. The quadrant is 5mm thick steel plate and is quick at setting common angles. It has indexed stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°. You can lock the quadrant at any angle within its range, using the scale and pointer. It also features a 458mm long anodised alloy fence, fitted with an adjustable flipover length stop. The 320mm long bar fits a standard 19mm x 9.5mm (3/4” x 3/8”) table slot; the locking washer is removable if required.
Axminster Taper Cutting Jig
UJK Precision Mitre Gauge and Fence
Inc.vat £99.96
Ex.vat £83.30
Code 104579
The thin end of the wedge.
UJK Technology Level Box
A simple but effective jig for cutting gentle tapers on the saw bench. Made of aluminium extrusions, the jig is held against the rip fence with the work sitting against the stop on the jig. The jig and the work are passed over the saw bench as one to cut the required taper. Angle range 0°-16°. Inc.vat £20.65
Saw Bench Taper Jig
Ex.vat £17.21
A serious tool for any woodworker: a digital protractor that provides clear and accurate readings... there isn’t a more useful setting-up device. You can now set angles that would usually require several test cuts, including straightforward 45º mitres with complete confidence. Use the hidden magnets in the base of the box to fix to a saw blade while adjusting the blade to your required angle. Or, place on your bandsaw table to make simple angle adjustments. An easy-to-read LCD screen displays readings between + and – 180° , with a resolution of 0.1. Light and portable, this little device should never leave your side. Inc.vat Ex.vat Code UJK Level Box £19.96 £16.63 103863
Code 310078
UJK Technology Circular Saw Aligning Jig Never run out of true, get the best from your saw. The UJK Technology Aligning Jig is a highly accurate jig that is simple to use. On a table saw you can measure five items:
Bridge City KM-1 Kerfmaker
• Align the blade to the mitre slots • Align the fence to the mitre slot, either parallel or with a measured amount of run-out at the end • Check the axial run-out of the blade (the side to side wobble you see if the blade is turned slowly) • Check the axial run-out of the blade flange • Check the axial run-out of the blade arbor
Perfectly sized grooves in three simple steps. Small, neat and precise, this tool is foolproof when it comes to cutting grooves up to 50mm wide. It works with saw blades, bandsaw blades and router cutters; maximum 12mm. Step 1: Set the orange slider to the kerf of the blade Step 2: Set the grey slider to the width of the material to go into the groove
Based on a simple mounting bar that fits any 3/4” (19mm) mitre gauge slot, the mounting bar has adjustable spring loaded balls to ensure a snug fit, plus levelling screws to accommodate differing depths of mitre slot. The dial indicator reads in increments of 0.001” with a total travel of 1”. Although primarily a circular saw tool you can also use it to set the blade heights on surface planers. An invaluable tool in any workshop.
Step 3: Using the Kerfmaker against a stop, cut one side of the groove, flip it over and cut the other side, then remove the waste. A perfect fit; guaranteed. As all the settings come directly from the blade and material, the Kerfmaker removes any chance of error in transferring or calculating measurements. Inc.vat £51.50
KM-1 Kerfmaker
Ex.vat £42.92
Code 105316
Circular Saw Aligning Jig
Inc.vat £55.50
Ex.vat £46.25
Code 508297
400kg 540kg
Inc.vat £82.50 £109.96
Ex.vat £68.75 £91.63
Code 105071 105072
Axminster Heavy Duty Mobile Bases In every workshop, space is at a premium. The ability to move a piece of equipment into a convenient working position or park it out of the way is a huge bonus. Our Heavy Duty Mobile bases have two fixed castors at the rear and feature two castoring wheels at the front. A mobile base is a practical method for manoeuvring heavy machines into position safely and with ease. Once the machine is in position, screw down the feet and raise the castoring front wheels off the floor, allowing the base to rest securely on the floor. Easily adjustable to suit your machine’s base, the maximum rectangle is 720 x 850mm, the minimum is 460 x 620mm. Two models are available with a weight limit of 400kg or the slightly heavier duty base at 540kg.
Blade Reducing Bushes Saw blade reducing bushes all with a standard 30mm outside diameter. They are 2mm thick and available in a range of bore sizes detailed below. These should be a good tight fit into the saw blade requiring a tap with a mallet to secure them in place.
15mm - 30mm Bush (2mm Thick) 16mm - 30mm Bush (2mm Thick) 18mm - 30mm Bush (2mm Thick) 20mm - 30mm Bush (2mm Thick) 25mm - 30mm Bush (2mm Thick) 5/8” - 30mm Bush (2mm Thick) 1” - 30mm Bush (2mm Thick)
Inc.vat £1.82 £1.82 £1.55 £1.82 £1.82 £1.82 £1.82
Ex.vat £1.52 £1.52 £1.29 £1.52 £1.52 £1.52 £1.52
Code 810357 810358 810359 810360 810361 810365 810362
305mm Crown Guard A replacement crown guard suitable for blades up to 305mm diameter. Fitted as standard on our TSCE-12R/AT305SB circular saws but could fit many other machines with a suitable riving knife. Fitted with a 60mm dust outlet. Inc.vat Ex.vat Code 305mm Replacement Crown Guard £30.90 £25.75 508230
Axminster No.1 for advice, range and service! Order now at axminster.co.uk
19