Twist Dogs A bench dog with an added twist. These dogs are excellent for the precise setup of fences and guide rails on the UJK multifunction workbench. Made from hard acetate plastic, these dogs will not damage cutting edges in case of accidental contact. The Twist Dog’s unique feature is a pin through the spigot. A simple quarter turn twist securely locks the Twist Dog into the specially drilled holes of the workbench. Available in two working heights of 18mm and 40mm. Inc.vat Ex.vat Code 18mm Twist Dogs (Pair) £13.66 £11.38 102541 40mm Twist Dogs (Pair) £16.80 £14.00 102542
Forged Quick Lever Guide Rail Clamp A guide rail and hold down clamp in one.
Revolutionise the way you work
Designed to be used with the Festool and Makita guide rail systems, these clamps are unaffected by power tool vibration. The fast action ratchet handle makes for easy, one-handed setups saving you time. It can also be used as a hold down clamp when used with a Parf Guide or MFT style worktop, making it extremely versatile. Inc.vat Ex.vat Code Quick Lever Guide Rail Clamp £31.60 £26.33 103061 T-Slot Cutter for Track Clamps £24.35 £20.29 101972
The workbench has long been the workhorse of the workshop, a tradition that will no doubt continue for many years to come. But workbenches are evolving and a new breed of bench is revolutionising the way we work, both in the workshop and on site.
Ratchet Hold Down Clamp The unique design makes it the perfect hold down clamp for the UJK Technology Multifunction Workbench or Festool MFT/3 Multifunction Table.
Multifunction Workbench (Frame Only) A solid, multifunction workbench for any workshop. Firstly, pick either the twist dog top (used here), or the 20mm Parf Super Dog top. Both tops are made from 18mm thick Valchromat, a material that is slightly heavier than MDF, more stable and far more water resistant. The grid of holes are CNC machined, guaranteeing incredible accuracy. This particular option utilises the unique twist dog, however, the holes can be used with any other 20mm bench accessory, including the Parf Super Dog. All of the holes are completely square and parallel to each other and, when fitted to a wooden frame (see plans), or trestles (shown on page 171), it is easy to cut perfect mitres and right angles with a track saw. It also makes an ideal framing or assembly table. The frame pictured here is constructed using 18mm faced birch ply, with the inside made with a 12mm box section construction. This gives excellent support to the top, ensuring the work surface remains perfectly flat. A 150mm deep apron has a grid of twist holes that run perfectly square and vertical to the top. This is great for accurately joining two pieces together, by guaranteeing each piece is in line and square with each other. The six cutouts in the apron allow easy use Inc.vat Ex.vat Code of quick clamps or standard F-clamps. Multifunction Table Base Frame £103.00 £85.83 102540 Overall frame size: 1,140 x 750 x 150mm HDF Valchromat Top For Twist Dogs £163.99 £136.66 102538 HDF Valchromat Top 20mm Holes £122.99 £102.49 102537 Valchromat Top: 1,102 x 718 x 18mm
170
The hold down utilises the rapid action and controllable high clamping power of the Forged Quick Lever Clamp. You can use it on any Parf Guide system cutting table and any woodworking bench with 20mm dog holes with a maximum benchtop thickness of 30mm. The ratchet mechanism can generate an exceptionally high clamping force with the support plates spreading the load, preventing the spigot from deforming the dog hole. It has a throat depth of 60mm and a maximum working height of 90mm. The top 4mm of the spigot is 25mm diameter; without a support plate this sits directly on top of you bench and precisely matches the 25mm portion of Parf dogs. It allows you to use the clamp’s spigot as a reference, positioning and clamping a workpiece at the same time. The spigot mount, locking knob and square support plates are S303 stainless steel CNC machined, highly accurate and rust free. A standard threaded version is also available. Inc.vat Ex.vat Code Ratchet Hold Down Clamp £39.95 £33.29 103566 Screw Thread Hold Down Clamp £30.00 £25.00 104459
Make the stand and create a solid bench for any workshop A simple bench can be constructed for the UJK Technology worktop table. Download the online instructions to construct the bench stand.
The Knowledge Blog - Learn. Discover. Create @ axminster.co.uk