Rotary Tables, Vices & Accessories Self Centring Precision Machine Vices These high precision vices are made of close grained high tensile cast iron with the jaws ground and hardened to 55+ HRC. Its swivel base is provided with positive locking screws and is adjustable through 360° automatically adjusting the workpiece to its centre. We’ve been so impressed with these, we are using and recommending them with our Axminster CNC mills. Available in three jaw sizes: 50, 75 and 100mm. Inc.vat Ex.vat Code 50mm £84.50 £70.42 507107 75mm £128.00 £106.67 507108 100mm £159.50 £132.92 507109
Accu-Lock Machine Vice An excellent general purpose low profile milling vice. The vice is carried on a swivel base but may also be mounted directly onto the machine table if desired. The jaw plates open to 125mm and can be fitted at either end of both the static and moving jaws, providing variation for clamping width capacity. Both jaws are hardened and ground 100mm steel jaws. A long tightening bar is provided, ensuring secure clamping. Machine Vice 125mm
Inc.vat £123.50
Ex.vat Code £102.92 953005
Precision Compound Slide Self Centring Vice Keep your job centre of attention. This precision compound slide self-centring vice is a good choice for applications, such as drilling and light milling, automatically self-centring a workpiece to its centre. Centring the vice to a machine’s spindle means that the centre of any workpiece clamped in the vice will automatically be in alignment with the spindle. It brings the additional benefit of movement in two axes. It increases accuracy and improves efficiency, allowing control, speed and precision in the movement of the work. The 80mm wide by 32mm deep jaws open up to 76mm. Each handwheel features a dial with 100 divisions, numbered every tenth. A full turn of the handwheel represents 3mm of travel, meaning each division represents just 0.03mm. The vice has 85mm of movement along the X-axis and 105mm on the Y-axis. Precision ground dovetailed slideways and an adjustable gib provide ultra Precision Compound Slide Self smooth operation. This vice is the perfect companion for Centring Vice woodworkers and metalworkers alike.
Inc.vat
Ex.vat
Code
£269.95
£224.96 105593
Inc.vat £90.00 £139.00 £192.00
Ex.vat Code £75.00 220094 £115.83 951565 £160.00 220095
Inc.vat £58.50 £51.95
Ex.vat £48.75 £43.29
Super Precision Machine Vices
Precision Compound Slide Vice & Swivel Base Swivel your shizzle when you’re drilling and milling. This precision compound slide swivelling vice combines rotation with lateral and longitudinal movement. It allows you to finely position and control the speed and movement of the work. The 83mm wide by 46mm deep jaws open up to 76mm. The swivel base provides complete rotation and is graduated a full 360°. Two bolts and a steel swivel baseplate provide positive locking of the vice to the swivel base. Each handwheel features a dial with 100 divisions and numbered every tenth. A full turn of the handwheel represents 3mm of travel, meaning each division represents just 0.03mm. The vice has 105mm of movement along the X-axis and 115mm on the Y-axis. Precision ground dovetail slideways and an adjustable gib provide ultra smooth operation. This vice is the perfect companion for woodworkers and metalworkers alike. Precision Compound Slide Vice & Swivel Base
Inc.vat
Ex.vat
Code
£259.96
£216.63 105592
If you’ve invested in a milling machine it’s vitally important you have a high quality, precision machine vice. These are some of the best available and are so accurate we recommend them for use with our CNC machines. They are made from close grained high tensile seasoned cast iron and have a scratch and rust resistant finish. The jaws, made from steel hardened to 55+/-3 HRC and ground with a parallelism of 0.0012” (30 microns), hold the workpiece dead square for perfect results. The vice bodies rotate horizontally 360° against a scale and can be locked securely in the set position. Two slots secure the vice to the machine table as well as a slot milled across the base to assist in accurate location. The main bodies of the vices are de-mountable from the circular bases. Available in three jaw sizes: 50mm wide by 25mm deep with 50mm opening, 75mm wide by 33mm deep with 75mm opening, 100mm wide by 38mm 50mm deep with 100mm opening. Precision work holding and 75mm absolutely superb! 100mm
Tilt Vices Going in at an angle. These 75mm or 100mm wide cast iron drill vices will tilt at any angle between zero and 90°, clamping securely in position for both drilling angled holes and light duty milling. The tilt action is really smooth, with no discernable movement in the dovetail slides when locked. The calibrated quadrant with locking lever allows easy setting of required angles and with six slots in the base for clamping making this vice a perfect companion for most milling machine and pillar drill tables. Both are fitted with hardened and ground steel jaws, the Tilt Vice 100mm 75mm wide version opening to 80mm, the 100mm version Tilt Vice 75mm opening to 108mm.
Code 106193 106195
Rotary Tables
AE475CT Compound Table Controlled and precise movement in two axes.
A rotary table can be used for a variety of milling, drilling and marking out operations in the home engineer’s workshop. By adding an indexing plate to the rotary table you can precisely divide a circle into a number of divisions, making repetitive operations easy. When a table is mounted vertically, a tailstock allows longer items to be mounted horizontally for machining or marking out.
144
Cast iron construction throughout the 475 x 155mm tabletop has as a fine ground finish with two T-slots along its length. The slots accept 16mm T–nuts. The table travel is lateral or x-axis 280mm, longitudinal or y-axis 180mm. The slides are dovetail and fitted with adjustable gib strips, to remove any play or wear and ensure smooth movement at all times. The table has 16mm metric trapezoidal thread lead screws with 2.0mm pitch. The handwheels have graduated dials with 100 divisions numbered every tenth and a vernier scale. One complete revolution moves the table 2.0mm. The table base is 200 x 270mm, with slots for fixing bolts at 160mm centres. Overall dimensions are L x W x H 665 x 380 x 125mm and weight is 23.5kg. Inc.vat Ex.vat Code AE475CT Compound Table £199.96 £166.63 105710
Visit our stores for personal advice before buying - see inside back cover