Table Saws Optional sliding table, router fence, dado blades, overhead crown guard etc
Axminster Trade Dado Blade Set Cut grooves between 6.35mm and 20.64mm and up to 45mm deep. This 204mm diameter Dado Blade Set comprises two 24 tooth TCT outer blades, six inner chipper blades and four spacers. The chippers and spacers fit between the outer TCT blades. Simply select the inner chippers and spacers required to cut the width of slot required. The outer blades are 3.2mm. The inner chippers are 4 x 3.0mm, 1 x 2.2mm and 1 x 1.5mm. The spacers are 2 x 0.4mm and 2 x 0.3mm.
UJK Technology RT-100 Router Table Fence ZC-10 Zero Clearance Insert
Use the AT254TS Table Saw as a router table. This fence fits into the twin 19mm parallel T slots machined into the table’s surface.
Designed for the AT254TS and AT254LTS Table Saws, this set fits onto the 30mm blade arbor, using the standard blade clamp and nut. A special 18mm wide kerf plate comes with both table saws. In use, you replace the riving knife on these saws, using the quick release catch.
When cutting small items or taking a thin slice from a board, it prevents the waste from dropping beneath the table. It also helps support smaller work, allowing finer cuts. Supplied uncut, you simply fit the kerf plate with the saw blade fully retracted, start the machine and very slowly raise the blade through the plate, cutting a slot that fits the blade perfectly. Being aluminium, it will not damage the saw blade. It is secured to the table with just one screw so is easy to change. Four levelling grub screws align the plate precisely to the table surface. Inc.vat Ex.vat Code ZC-10 Zero Clearance Insert £58.96 £49.13 104502
The fence is an anodised alloy extrusion with left and right hand phenolic adjustable fence wings. The right-hand wing is micro adjustable with nylon shims. The fence can accommodate cutters up to 90mm in diameter. It has a dust hood with a 62mm OD hose outlet.
Because using this set necessitates the removal of the standard crown guard and riving knife, we strongly recommend the purchase and fitting of the S-12 Overhead Guard (104504) to the AT254TS (AT254LTS), which as well as providing additional user safety, has a much greater efficiency of dust extraction when used with a suitable extractor.
Although intended as an option for the AT254TS Table Saw, it would be quite suitable for use on a workshop produced router table with the UJK Technology Mitre Slot track fitted into the surface. Inc.vat Ex.vat Code UJK RT-100 Router Table Fence £199.94 £166.62 104507
If you are intending to use this dado head on other machines, please ensure that the machine is capable of mounting this head securely. You will need a 30mm arbor at least 21mm in length. Inc.vat Ex.vat Code 205mm Dado Blade Set £199.94 £166.62 104503
Shark S-12 Overhead Crown Guard
ST1400 Sliding Table for AT254TS
Replaces the standard kerf plate on the AT254TS Table Saw. For use only when the blade is at 0°, it sits extremely closely; a mere 0.5mm from the blade.
Offers increased safety and more efficient dust collection. The Shark S-12 Overhead Crown Guard fits the AT254TS or smaller AT254LTS Table Saws. A heavy duty steel frame, cast joints and high grade alloys make it rigid yet easy to adjust. The large, unbreakable polycarbonate hood allows great visibility for safer use. The hood assembly is easy to adjust for height above the blade. When needing to change the blade the entire top arm hinges back to the rear and out of the way. This crown guard is a good enhancement for the saw, making work safer and more efficient. Inc.vat Ex.vat Code Shark S-12 Overhead Blade Guard £634.00 £528.33 104504
Turn the AT254TS Table Saw into a small panel saw. The ST1400 Sliding Table is easy to install on the AT254TS , mounting is a simple matter with just three bolts. This sliding table has a stroke of 1,400mm, and is 1,200 x 230mm in size. A separate 335 x 230mm outrigger table comes with it offering extra support. Also included is the UJK STF1400 Fence (104506) which has a telescopic fence arm, flip stop for repeat cuts and angle cuts from -50° to +50°. The ST1400 Sliding Table will fit almost any table saw with a vertical, flat front table face around 50mm deep, and at least 1m in length. On other table saws, three holes will need drilling and tapping to 8mm. Inc.vat Ex.vat Code ST1400 Sliding Table £789.94 £658.28 104505
Axminster No.1 for advice, range and service! Order now at axminster.co.uk
11