Axminster Engineering Lathes & Accessories Why do you need a lathe? The simple fact is it’s the most versatile machine that you can have. Not only can you turn, bore, grind, face and part off but with some slight modifications, you can also carry out milling jobs. Now, of course, doing milling jobs on the lathe won’t be as accurate as a mill but, you can still do them. With one in your workshop, you will be able to perform a wide variety of tasks to a very good standard. 80mm diameter 3-jaw self-centring chuck
Electric variable speed control
Capacity 140mm diameter, 250mm between centres
Small and lightweight, fits anywhere Manual or powered lead screw feed
Cast iron and steel construction
C1 Micro Lathe Small in size yet packed full of features, a lathe that could provide the perfect introduction to metal turning. The machine is small enough to fit into the corner of a workshop and is light enough to be truly portable. The construction is predominantly of cast iron and steel. The capacities, 140mm diameter and 250mm between centres, are surprisingly large for a machine of this overall size. Features of note are the electric variable speed control, manual or powered lead screw feed and an extensive range of accessories. The lathe comes supplied with 80mm diameter 3-jaw self-centring chuck, tailstock centre and service tools. Maximum tool shank size is 8mm.
Axminster SIEG C1 Thread Cutting Kit Add another dimension to your C1 micro lathe with a thread cutting kit. Containing 7 additional gears, you can cut threads with pitches of .5, 0.7, 0.8, 1.0, and 1.25mm. Inc.vat Ex.vat Code Thread Cutting Kit £12.44 £10.37 100030
Axminster SIEG C1 Tailstock Chuck A 10mm capacity chuck fitted with a 1MT arbor which just slots into the tailstock to give a secure and accurate location for drilling and similar operations. Inc.vat Ex.vat Code Tailstock Chuck £25.90 £21.58 100031
AVAILABLE TO VIEW
IN ALL STORES
Power Voltage Spindle Speed Spindle Bore Taper Headstock Taper Tailstock Centre Height Distance Between Centres Max Diameter over Bed Cross Slide Travel Leadscrew Pitch Thread Pitch Range Overall L x W x H Weight
150 W 230 V 100 - 2,000 rpm 10.5 mm 2 MT 1 MT 70 mm 250 mm 140 mm 50 mm 1.5 mm 0.5, 0.7, 0.8, 1.0, 1.25 mm (Requires Change Wheels) 630 mm x 330 mm x 210 mm 22 kg
Model Engineer Series C1 Micro Lathe
Inc.vat £549.96
Ex.vat Code £458.30 505101
Axminster SIEG C1 1MT Live Centre A live centre rotates on ball bearings, meaning you need little or no lubrication and can apply greater pressure to your work. Inc.vat Ex.vat Code 1MT Live Centre £25.90 £21.58 100032
50mm Quick Release Vice This neat little vice can be used either on the table of the Micro Mill or mounted on the vertical slide on the Micro Lathe. Slots in the base allow it to be bolted onto the vertical slide and there are notches in the jaws for accurate location of circular items. Jaw width is 50mm and base size is 60 x 95mm. Inc.vat Ex.vat Code Quick Release Vice £49.44 £41.20 100022
Axminster SIEG C1 Vertical Slide Allows light milling jobs to be done on your lathe. Simply fit to the saddle in place of the tool post to provide a means of holding small components. Work can be held onto the slide either with clamps and T-bolts or by using a small machine vice. Inc.vat Ex.vat Code Vertical Slide £144.96 £120.80 100028
Join our email club - the best way to get deals, news and much more from Axminster
91