Morticers Don’t overlook your safety… Gas strut to provide smooth downward travel of the headstock
Safety Spectacles Stylish with excellent fit and coverage.
£5.60
Code: 952156
New JSP Spring Fit Respirators
Maximum chisel size 25mm (softwood), 19mm (hardwood)
JSP Ear Defenders See page 177
More online! Chisel bushing size 1.3/16” OD
Easily set depth stop for repeat accuracy
Single handwheel controls both directions of table travel
Large cast iron table with tall back fence
AVAILABLE TO VIEW
IN ALL STORES AT25FM Floor Standing Morticer Easy to use and set-up for all morticing needs The AT25FM comes on a welded stand whilst the main body of the morticer is cast iron. The strong heavy-duty construction gives the machine a 25mm capacity. A single handwheel controls both longitudinal and lateral table movement. This system makes controlling the movement a breeze and prevents the table from skewing. The table has a tall back fence, with lateral stops at the rear for repeat morticing ; the machine also has a depth stop. The multiple position material clamp con accommodate different workpiece widths. The downfeed lever provides the correct leverage and good feedback as the cut progresses. A gas strut provides smooth downward travel of the headstock and also allows headstock “parking” in any position. This machine is well suited to the busy trade workshop and will provide many years of accurate and trouble-free service. It accepts chisels with either 1.13/16” or 13/16” shanks. Power 750 W Voltage 230 V Chisel Stroke 125 mm Max Height of Timber with 12.7mm Chisel and Bit 225 mm Max Chisel Size Softwood 25 mm Max Chisel Size Hardwood 19 mm Overall L x W x H 660 mm x 515 mm x 1,538 mm Weight 160 kg AT25FM Floor Standing Morticer 230V Accessories Heavy Duty Ball Stand
40
Inc.vat £999.96 £70.96
Ex.vat Code £833.30 508488 £59.13
510407
Morticing Chisel Sharpening Set Sharpening chisels for morticing machines doesn’t get much easier than this. Fit the multi-flute conical reamer to the appropriate size pilot piece and just a few turns removes a tiny amount of metal from the chisel’s internal bevel. Using the fine diamond honing stone included with the kit touches up the outer faces of the chisel by removing any burrs thrown up by the reame. It’s as simple as that. A sharp chisel cuts cleaner and is far less prone to burning and, of course, puts far less strain on the morticing machine. It leaves the internal faces of the mortice smoother and cleaner making for a better fitting joint. This Axminster mortice chisel sharpening kit will fit most Taiwanese and Japanese mortice chisels metric and imperial sizes up to 12mm/1/2”. N.B. Touch up the chisel’s auger at the same time using a simple triangular needle or saw file. Mortice Chisel Sharpening Set
Free 3 Year Guarantee on ALL machinery - just buy the right tool for the job!
Inc.vat £38.45
Ex.vat £32.04
Code 700173