Axminster Clamps Clamping is as easy as A, B, C
Self Adjusting Horizontal Toggle Clamp Self Adjusting Toggle Clamp Push/Pull Huge adjustable clamping force. The self adjusting push/pull toggle clamp converts the movement of the handle into an axial movement of the piston. The piston pushes a workpiece against a fence or stops and locks with the handle in the horizontal position. For example as used on most pocket-hole jig systems. The piston has 15mm of travel and automatically adjusts to variations in workpiece thickness. The piston centre height is 17.5mm. A set screw, on the cantilevered joint, adjusts the clamping force to your particular needs up to 204kg for the 15 and 306kg for the 25. The piston has an internal thread with an extension for manual length adjustment. The wide injection moulded handle has a soft grip insert, which makes setting the clamp a comfortable operation. Made from quality steel, galvanised and passivated against corrosion. Inc.vat Ex.vat Code Self Adjusting Toggle Clamp Push/Pull 25 £24.20 £20.17 105069 Self Adjusting Toggle Clamp Push/Pull 15 £22.40 £18.67 105068 Toggle Clamp Plate £19.70 £16.42 506446
For hold down clamps turn to bench accessories.
An invaluable part when constructing a custom made jig. For use on a router table, spindle moulder or saw bench. Simply press the handle down and the clamp locks in position securely holding the workpiece in place. Toggle clamps are quick to lock and unlock and are very versatile. Anywhere you need a fast, firm hold down, a toggle clamp is useful. They are perfectly suited for use in small-scale production situations. This self-adjusting toggle clamp automatically adjusts to the height of the workpiece within its capacity. A set-screw, on the cantilevered joint, adjusts the clamping force to your particular needs, up to 204kg. The wide injection moulded handle has a soft grip insert, which makes setting the clamp a comfortable operation. Made from quality steel, galvanised and passivated against corrosion. Inc.vat Ex.vat Code Self Adjusting Horizontal Toggle Clamp 20 £21.65 £18.04 105061 Self Adjusting Horizontal Toggle Clamp 50 £23.15 £19.29 105062 Self Adjusting Horizontal Toggle Clamp 70 £23.99 £19.99 105063 Toggle Clamp Plate £19.70 £16.42 506446
Cam Clamps
Right Angle assembly clamps are that third and fourth hand. Made from glass fibre reinforced nylon they have a single handed ratchet mechanism allowing them to be squeezed together across a corner, providing a firm hold. The clamps hold boards or panels from 10mm to 20mm thick at 90°, with a variation of up to 6mm in thickness between the panels. Ideal for picture framing, test fitting, holding whilst applying cramps or placing a fixing. Overall size 100mm x 75mm x 40mm, sold in pairs. Inc.vat Ex.vat Code Assembly Clamps (2) £7.70 £6.42 202403
A vertical toggle clamp operates by raising the handle from the horizontal to the vertical position. When locked, the handle forms a convenient grip to hold onto if part of a jig. Available in a variety of capacities. Inc.vat Ex.vat Code 20mm (Holds 50kg) £6.00 £5.00 500314 35mm (Holds 100kg) £6.95 £5.79 500315 45mm (Holds 180kg) £8.50 £7.08 500316 62mm (Holds 250kg) £10.00 £8.33 378001 75mm (Holds 360kg) £13.00 £10.83 500317
Toggle Clamp Type B A horizontal toggle clamp operates by moving the handle from the vertical to the horizontal. It comes into its own where an upright handle would otherwise cause an obstruction. 15-35mm (Holds 50kg) 15-50mm (Holds 90kg) 30-65mm (Holds 227kg) 35-95mm (Holds 340kg)
The fastest action Axminster Trade clamps of them all.
Pair of Right Angle Assembly Clamps
Toggle Clamp Type A
Inc.vat £6.50 £6.95 £7.45 £10.00
Ex.vat £5.42 £5.79 £6.21 £8.33
Code 810468 500319 500321 500320
Light, fast acting clamps with tough hornbeam heads with galvanised steel bars. The jaws have slip resistant cork pads, allowing you to exert a considerable amount of pressure without marking the work. Perfect for gluing up mouldings on panels or frames, they are also popular with violin makers, where many clamps are needed but total weight would be a problem. 200 x 110mm 200 x 150mm 200 x 200mm 300 x 110mm 400 x 110mm 600 x 110mm
Inc.vat £9.98 £14.99 £15.98 £10.96 £11.95 £13.96
Ex.vat £8.32 £12.49 £13.32 £9.13 £9.96 £11.63
Code 510430 510431 510432 510435 510440 510443
Toggle Clamp Type C This piston type toggle clamp locks with the handle in the horizontal position. It pushes a workpiece against a fence or a stop. An example of this can be found on most pocket hole systems. The maximum piston travel is 20mm. Inc.vat Ex.vat Code 20mm Travel £12.95 £10.79 810469
Floorboard Ratchet Clamp A strong strap clamp for forcing floorboards together.
Assembly Guides This clamping jig makes what can often be an awkward job almost effortless.
Veritas 4-Way Speed Clamp The fastest adjusting frame clamp on the market. Completely knurled for good grip, the speed-clamping nuts are designed to let you make fast adjustments, yet hold securely when you tighten them.They are cross drilled to slide easily on the rods until they come up against a corner clamp; then their threads engage. To release them, you just have to back them off a turn or two and they are then free sliding again. The speed clamp includes four corners (strong, glass-filled nylon with brass inserts), four speed clamping nuts and four 1/4” UNC threaded rods that will clamp up to 585 mm square. To increase clamping capacity to 1,120 mm square or 1,650 mm by 585 mm rectangle, an extension set is included; it contains four 1/4” UNC threaded rods and four coupling nuts. Inc.vat Ex.vat Code 4-Way Clamp £30.65 £25.54 475309
The Assembly Guides are 150mm x 150mm x 25mm, suitable for large work such as cupboard and cabinet assembly as well as smaller projects like drawers and picture frames. Made from 2mm thick stainless steel, they will not corrode, bend or deform. The L-shaped profile is strong, yet thin enough to allow quick and easy fastening with spring clamps. For greater holding power, use Quick-clamps or G clamps. Square Assembly Guides work with most joinery techniques, from simple nailing or glue alone to hand cut dovetails. You can use them on both internal and external angles. Attached to a work surface, temporarily or permanently, they become a simple assembly jig. They are perfect to use with pocket hole joinery until all the screws are home. Use them as holders/braces for auxiliary fences, or as part of a custom designed jig. Supplied as a pack of two. Axminster Assembly Guides (Pair)
Inc.vat £19.96
Ex.vat £16.63
Code 102453
This clamp uses a ratchet strap to pull the floorboards together prior to fixing. The two plates are positioned over the edges of the boards, the strap is threaded into the ratchet and tightened to apply the necessary clamping force. The working range is between 300mm and 4m. Inc.vat Ex.vat Code Floorboard Ratchet Clamp £28.96 £24.13 102630
Flooring Edge Clamp An invaluable aid for the installation of wooden strip flooring. This handy little clamp is an invaluable aid for the installation of wooden strip flooring. It is positioned on the board with the lip over the edge and the clamp screw is tightened up against the wall to position the edge boards. There is a plastic end on the screw to prevent marking the wall. Inc.vat Ex.vat Code 100 x 100mm £20.95 £17.46 102472
Axminster No.1 for advice, range and service! Order now at axminster.co.uk
193