Axminster Trade Clamps Forged G Clamp
The forged G clamp is equally suited to the wood or metal workshop.
620kg to 900kg Max Pressures
Whether you are a woodworker, metalworker, fabricator or welder this clamp will not let you down. Made from forged, spring-tempered steel, they are immensely strong and virtually unbreakable, even when dropped on the workshop floor. A tommy bar allows the force to be applied fast without difficulty utilising the machined and hardened Acme thread. The swivelling shoe permits cramping of slightly tapered pieces. Inc.vat Ex.vat Code 50mm x 50mm £14.75 £12.29 504001 100mm x 60mm £21.65 £18.04 504002 150mm x 75mm £27.35 £22.79 504003
Bar Clamp Rack Forged Deep Throat G Clamp
600kg
Max Pressure
When the situation demands that extra reach. Like other forged clamps the grain of the metal is continuous throughout the forged structure. This is a huge advantage for a deep throat clamp. The forging can withstand the extra forces exerted on the frame due to the higher leverage of the longer reach. Maximum clamping force 5,884N. Inc.vat Ex.vat Code 75 x 125mm £19.75 £16.46 505521 125 x 200mm £32.99 £27.49 505522 150 x 250mm £47.56 £39.63 505523
A simple clamp set which can be located in holes either in a benchtop or in separate timber beams to provide a means of assembling multi-board panels.
The classic English-style clamp heads. Separate clamp heads offer complete flexibility in the choice of both length and material for the bar. Use timber for lighter weight and ease of working or metal box section for the ultimate in rigidity. Our clamp heads are cast iron and steel and feature an ingenious elongated pinhole, which improves the clamping performance. Pressure to the jaw faces drives the clamp heads down against the bar with equal force, maintaining the jaws at 90° to the bar. The maximum bar width is 25mm and the depth is virtually unlimited! Inc.vat Ex.vat Code Clamp Head Set £14.70 £12.25 505546
Safely store your F clamps, sash clamps, parallel jaw clamps and the like. The storage slots are 12mm wide and the capacity is up to 12 clamps or 25kg. Made in 2mm thick steel with a painted finish they are unlikely to bend under load or rust over time. Each rack is 590mm long and pre-drilled for fixing to a wall. An ideal companion to the Axminster Trade Clamps G clamp rack. Tidy up, gain more workshop space and say goodbye to that heap of clamps in the corner. Inc.vat Ex.vat Code G Clamp Rack £18.95 £15.79 104700 Bar Clamp Rack £19.94 £16.62 104701
Mitre Clamp - 75mm
Panel Clamp Set Clamp Head Set
Keep the workshop tidy and your clamps close to hand with the Axminster clamp racks.
A second timber bar can be positioned on the opposite pins of the clamping blocks to stiffen up the whole assembly. The clamps are usually used in pairs for shorter timber lengths and three, or even more, when clamping longer lengths. The removable handle keeps the work area clear once the clamps have been tightened. European made. Inc.vat Ex.vat Code Panel Clamp Set £15.96 £13.30 102473
An alloy mitre clamp, which holds the joint firmly in position, allowing time for the glue to dry or you can tap in a pin. Countersunk screw holes allow you secure the clamp onto a board or bench. The saw slot enables you to run a saw blade down through the joint for a perfect fit. These are light-duty clamps designed to do the job well when the occasion arises. The price means purchasing one for each corner of a frame won’t break the bank. Timber capacity is 15mm deep by 75mm wide. Inc.vat Ex.vat Code Mitre Clamp 3” £7.96 £6.63 104862
600kg
Max Pressure
Heavy Duty Spring Clamps Easily hold two parts in place whilst the glue dries.
Cast Pipe Clamp Make virtually any sized clamp you need. This is the clamp of choice in the USA for joinery, cabinet making and general work. It offers great flexibility and clamps can be as long or short as you wish. One head set and a variety of pipe lengths gives you lots of choice for little outlay. The heads will fit onto standard 3/4” bore black iron pipe (nominal 1.05” O/D) with a 3/4” BSP thread, which is available from steel or plumbing merchants. Inc.vat Ex.vat Code 3/4” Cast Pipe Clamp £19.45 £16.21 505560
192
These spring clamps are easy to position with one hand, fast, firm, relatively inexpensive and more than capable of fulfilling numerous clamping needs. These all-steel, plated clamps have vinyl plastic jaw tips to protect your workpiece. The same coating on the handle makes for comfortable use. Use these clamps for holding workpieces whilst glue dries, temporarily securing a moulding as you nail it in place, in small jigs or just as overgrown bulldog clips. 25mm 50mm 75mm
Inc.vat £1.85 £2.95 £4.96
Ex.vat £1.54 £2.46 £4.13
Code 951744 951743 951742
Frame Clamp A tempered steel band maintains an even clamping pressure on the workpiece. The band passes through four aluminium corner brackets. Their internal corners have self-aligning plastic jaw faces for use on non-square work. The plastic jaws are removable when clamping square or rectangular work. A large handle with a screw thread applies the required pressure. By removing the aluminium corner pieces entirely, you can clamp oval, circular or coopered work. For use on frames 65mm to 915mm square. Inc.vat Ex.vat Code Frame Clamp £28.90 £24.08 505581
Visit our stores for personal advice before buying - see inside back cover