Now watch the video online!
Multifunction Workbench for Parf Dogs Portable, solid and accurate. This multifunction workbench allows accurate cutting and assembly on site or in the workshop. Choose either the twist dog top, or the 20mm Parf Super Dog version pictured here. The holes on this table can be used with any other 20mm bench accessory, including the Parf Super Dog. Supplied with a pair of trestles. Inc.vat Ex.vat Code Multifunction Workbench 20mm Grid £259.96 £216.63 717978 Multifunction Workbench Twist Grid £299.96 £249.96 717979
Parf Super Dog The most versatile and accurate bench dogs available. The Parf Super Dogs precisely match the holes made by the UJK Technology 20mm cutter. They fit with exacting precision into the 20mm holes of the UJK Technology Multifunction Workbench. They’re also compatible with the Festool MFT/3 tabletop and other grid tables with 20mm holes. Tall standard dogs, no matter how tight the tolerances in the dog hole, will always have a little movement. There has to be a slight tolerance. However, without a locking device, this will inevitably result in a slight wobble and a possible loss of accuracy. The taller the dog, the more pronounced the movement. In order to overcome this, the original Parf dogs clamp to your table using a threaded knob, this assumes you have easy access to the underside of your table. The Parf
Super Dog makes locking into place easy. A simple twist of the top of the dog changes fine tolerance into zero tolerance and locks it firmly in place. A simple twist of the top in the opposite direction releases the dog. Finally, a stop collar fits into the chamfer around the dog hole found as standard on the UJK Technology worktop. It provides a register ensuring the dog sits exactly at 90° to the work surface when locked in place, whilst still allowing for a flush fit. A UJK Technology chamfer cutter is available for other non chamfered tables, or you can use a router with a bevel cutter to create a slight chamfer. If the dog holes do not have a chamfer, you can use the Parf Super Dog with this collar inverted. Inc.vat Ex.vat Code Parf Super Dog £24.95 £20.79 104302
Accurate, repeatable cuts Once locked into position from the top, the Parf Super Dog ensures there is no wobble or movement, typical in dogs without a locking device. Precisely manufactured to an exceptionally fine tolerance, this simple device delivers complete accuracy, every time. Choice of three configurations The Parf Super Dog comes with three interchangeable collars. Mimicking the original Parf Dog, a 25mm diameter, 10mm tall mid-bush provides 60mm projection in total. A stop collar fits into the chamfer around the dog hole (standard on the UJK Technology Multifunction Workbench) while a 20mm diameter plain collar allows a completely flush fit. Can also be fitted from underneath the work surface to create a low profile dog.
Now watch the video online!
Using the flush ring allows the dog to be used in any 20mm dog hole, but remember, you will need to make sure the dog is sitting exactly square for accurate work.
If you want to use it with your other 20mm dogs, simply change the ring to the 25mm register and use it in the conventional way.
The 45º chamfered ring registers on the surface of the table and locks into place. This means you do not have to check for square.
That’s not all, this dog has one more trick. By inserting the Super Dog with the 25mm register from underneath the bench, it turns into a low profile stop. This allows you to butt up against the dog and work on the top of the piece.
Join our email club - the best way to get deals, news and much more from Axminster
123