Bench Accessories Veritas Parf Dogs Very useful accessory for making accurate, repeatable cuts.
Adjustable Bench Stop Quick and easy to install without the need to cut into your bench. Our European made planing/bench stop mounts directly onto the end of your bench. Two screws are all it takes to add this well made and robust piece of bench furniture. The movable dog adjusts vertically from zero to 50mm, locked by a thread with a tommy bar. For wider support, add a second stop with a few centimetres between the two. This is a very strong addition to your bench requiring a minimal amount of work to fit it. Inc.vat Ex.vat Code Bench Stop £32.95 £27.46 103291
Parf dogs let you take advantage of the CNC produced grid of holes on the Festool MFT/3 and other multifunction tables. The dogs are available in two sizes: 10mm high bench dog and 70mm high Parf dogs. By using a combination of bench dogs and Parf dogs to position your work and guide rail, you can easily achieve accurate repeatable cuts at 45° and 90°. Each size of dog is supported on the surface of the bench by a thicker boss or collar, 25mm in diameter and 10mm high, which provides a good bearing surface and stability in use. For additional security, each dog has a threaded hole to fasten it from below the table with an MFT3 accessory clamping knob (not included) or an inexpensive knob available separately. The two types of dog can be used for a variety of different purposes. The small dog can be inverted and inserted from below the table top to exploit its M8 threaded through hole as an anchor point. The bench dogs can also be used to accurately set up the fence and guide rail on the MFT3 and the Parf dogs are great for making trammels for circular or arched router guidance. If you don’t own a Festool table then a super accurate DIY cutting table can be produced utilising the Parf Guide System and 19mm MDF sheet. Inc.vat Ex.vat Code 10mm Bench Dogs (Pair) £11.30 £9.42 504542 70mm Parf Dogs (Pair) £17.10 £14.25 504543 UJK Parf Guide System £149.95 £124.96 102278 Star Knob - Male M8 x 40mm £2.75 £2.29 953482
Veritas Surface Clamps No ordinary bench hold down clamp.
Veritas Bench Blades The lowest profile workholding available gives you all the clearance you need. A thumb-operated eccentric cam lever controls the sliding jaw, allowing you to secure work quickly, with only a 6mm projection above your bench top. The jaw has a 6mm range of travel and applying up to 130kg of force. Flats on the cam provide secure stops at 3mm and 6mm of travel. The jaw face has a 5° inward cant to help hold a workpiece securely. The cam and jaw are cast steel, heat treated for surface hardness. The standard post version is for use in a throughhole (or blind holes at least 47mm deep). The wedge-lock version is usable at any angle from horizontal to vertical. It will anchor firmly in a through-hole in material as thin as 16mm or in blind holes that are a minimum of 34mm deep. Available in 19mm (3/4”) and 20mm diameter post versions. Inc.vat Ex.vat Code Standard Post 3/4” 19mm £14.56 £12.13 212617 Wedge-Lock Post 3/4” £22.00 £18.33 212618 Standard Post 20mm £14.56 £12.13 506457 Wedge-Lock Post 20mm £22.00 £18.33 506458
In true Veritas style they have taken an ordinary thing and made it much, much better. These fast acting surface clamps can be used anywhere you can drill a 19 or 20mm diameter hole. The post has a wedging mechanism which anchors it firmly (horizontally or vertically) in material as thin as 16mm(5/8”) provided it will resist the expansion of the wedge, making it the perfect companion for your jigs and sub-tables. The clamp arm slides easily for quick adjustment when tilted but locks firmly at 90°, with a reach of 54mm(2.1/8”) it will also clamp up to a thickness of 95mm(3.3/4”). The combined forces of the wedge hold activated by the top screw, firm lock on the shaft ridges via steel pins and the generous clamp screw give you excellent hands free holding power. Inc.vat Ex.vat Code Surface Clamp 19mm £55.00 £45.83 701279 Surface Clamp 20mm £55.00 £45.83 506456
Veritas Wonder Dogs & Pups Hugely versatile bench top fittings, which come in very handy for all sorts of jig and homemade clamping devices.
Veritas Bench Hold Down Exceptionally high clamping forces can be obtained with this hold down. The arm is free to pivot independently, all levered forces are exerted downward, without any loss due to horizontal slippage from the canting action of the hold down post. The fine grooves on the post resist upward forces, yet still allow easy entry into a 19mm diameter hole. The 250mm hold down post gives you 200mm of clamping capacity, matching the 200mm throat capacity. Used vertically on the top of a bench, or horizontally in a side skirt. Inc.vat Ex.vat Code Hold Down Clamp (each) £82.99 £69.16 500229
120
The Wonder Dogs and Pups are basically bench dogs with a length of threaded bar through the top, tommy bar one end and brass clamping face at the other. The difference between them being stem length, Dogs are 165mm, Pups are 70mm. Dogs have a spring retainer, Pups an O-ring. Choice is dependent on bench top thickness, below 38mm use Pups, above 38mm use Dogs. All that is required to mount them is a 19mm hole. Use for making: long clamps, curved work,jigs, unique shapes, bench work. Inc.vat Ex.vat Code Wonder Dog £29.26 £24.38 202392 Wonder Pup £26.65 £22.21 202393
Veritas Prairie Dog Now you see them, now you don’t! This is a clever bench dog, whenever you need it, simply press the top and up it pops (about 8mm projection). When you are done, just press down to recess the stop back into the hole. The solid brass body has a 2° inward slope to hold the wood securely. The spring mechanism is height adjustable to accommodate hole depths of between 50mm and 62mm with a diameter of 3/4”(19mm). For deeper holes, use a dowel spacer. When used in a through hole, the dog sits on a steel plate screwed to the underside of the worktop. Additional stop plates are available in a package of 4 to allow you to set up additional bench locations. Sold in pairs. Inc.vat Ex.vat Code Prairie Dog £23.45 £19.54 504090 Prairie Dog Extra Stop Plates (Pkt 4) £2.86 £2.38 504091
Veritas Surface Dogs This might be a small dog, but it still has a big bark. These dogs let you take advantage of the precise grid layout of the Festool MFT/3 table top and other multifunction tables. Perfect for fast and repeatable work positioning, and are particularly useful for accurately aligning work in relation to the guide rail for 90° or 45° cuts. CNC machined from aluminium, they have a flat face for work registration and a rim that supports and stabilises them on the bench surface. Each dog has a post that fits into the 20mm holes of the Festool MFT/3 table top. They are supported on the surface of the bench by a thicker boss or collar, 25mm in diameter and 10mm high, which provides a good bearing surface and stability in use. For additional security, each dog has a threaded hole to fasten it from below the table with a suitable clamping knob available separately. The two sizes of dog can be used for a variety of different purposes. Apart from their use as a low-profile stop, the dogs can be inverted and inserted from below the table top to exploit the M8 threaded through hole as an anchor point. The bench dogs can also be used to accurately set up the fence and guide rail on the MFT3. Inc.vat Ex.vat Code Small (Pair) £12.90 £10.75 506451 Large (Pair) £14.95 £12.46 506452 UJK Parf Guide System £149.95 £124.96 102278 Star Knob - Male M8 x 40mm £2.75 £2.29 953482
Veritas Round Bench Dogs & Pups The 2º inclined face helps keep the work down onto the bench. These are made from solid brass rod. The crosshatching and 2° slope on the face help to hold wood securely, pulling it down onto the bench’s surface. A side spring slides cleanly and holds it in position. The dogs are 110mm(4.3/8”) long, the pups 60mm(2.3/8”). Both work well in combination with Veritas Wonder Dog and Wonder Pup Clamps. For 19mm(3/4”) dog hole. Bench Dogs (Pair) Bench Pups (Pair)
Inc.vat £22.66 £18.60
Ex.vat £18.88 £15.50
Code 475715 475881
Veritas Muzzles For Bench Dogs (Pair) Take the bite out of Veritas Bench Dogs and Pups. The ribbed faces provide non-marring, non-slip surfaces for clamping a finished piece without marking it. They have a firm, spring-grip, plastic body, which simply slips onto the head of the bench dog or pup. 32mm length for dog and 19mm for pups. Inc.vat Ex.vat Code Muzzles for Bench Dogs (Pair) £2.10 £1.75 104275 Muzzles for Bench Pups (Pair) £1.80 £1.50 104276
Visit our stores for personal advice before buying - see inside back cover