DRILL GUIDE
Using self centring pins supplied
UJK Drill Guide with 10mm Chuck Solid, very accurate and offers a great deal of flexibility It is practically impossible to drill at a specific angle, freehanded. This highly engineered drill guide guarantees precise results. The UJK Drill Guide is in effect a hugely versatile and portable drill press. The portability of this guide ensures that you can drill virtually anywhere. • Capable of drilling any angle between +/- 60° • Set at 90° for perfectly perpendicular holes • Takes bits or holesaws up to 60mm diameter • Suitable for most power drills, mains or cordless • 1/4” hex drive shaft, with 3-jaw, 10mm geared chuck • Cast aluminium base, machined slide assembly with steel guide-rods • Rubberised, high-friction, non-slip base pad Drill Guide with 10mm Chuck Keyed Drill Chuck 1-13mm (JT2 Taper)
Inc.vat
Ex.vat
£139.98 £22.78
£116.65 106072 £18.98 106074
Code
UJK Self Centring Vice for Drill Guide A superb drill vice for the dedicated pen turner. Made to fit directly onto the UJK Drill Guide, this beautifully engineered self centring vice will be just as useful on any small pillar drill. A vee-notch in each face holds both round or square stock perfectly centred and perpendicular. The jaws run on four steel guide bars ensuring smooth perfectly parallel movement at all times. Rotating the control knob clockwise opens the jaws and vice-versa to close. Threaded holes in the base correspond with fixing holes on the base of the UJK Drill Guide. For convenience, it is a simple job to attach a sub-base for use elsewhere. With the jaws fully open the maximum capacity is 70mm x 45mm. Maximum diameter or diagonal measurement is 45mm. Self Centring Vice for Drill Guide
Inc.vat
Ex.vat
£69.98
£58.32 106216
Code
Free delivery on orders over £45 (UK mainland only) under £45 just £3.95
92-114_Drilling_2020.indd 99
99 17/08/2020 11:09