TRADE NAILERS AT1550FN 15g Finish Nailer 15-50mm A top quality trade rated finishing nailer for both interior and exterior use. The non-marking tip device and the adjustable depth control make it just as good for fine furniture and upholstery work as it is for battening and framing. Easy loading of nails into the rear entry angled magazine coupled with the powerful nailing action make this a real time saver on site. The swivelling exhaust deflector and rubber grip handle makes for comfortable use. The nails are 34°, 15 gauge (1.8mm) with 3mm heads. The nailer will take nails with a minimum length of 15mm and a max of 50mm. The tool has a 1/4” BSP Euro male bayonet fitting. Supplied in a plastic storage case. Operating Pressure
70 to 120 psi / 4.8 to 8.3 bar
Inlet
1/4” BSP
Load Capacity
100 nails
Overall L x W x H
Inc.vat
Ex.vat
AT1550FN 15g Finish Nailer 15-50mm
£154.28
£128.57 106166
32mm Nails (Qty 4,000) 38mm Nails (Qty 4,000) 44mm Nails (Qty 4,000) 50mm Nails (Qty 4,000)
£37.68 £45.38 £53.18 £69.98
£31.40 £37.82 £44.32 £58.32
7 cfm / 198.2 l/m
Air Consumption
345 mm x 120 mm x 305 mm 2.53 kg
Weight
Code 114014 114015 114016 114017
AT2564MN Masonry Nailer 25-64mm Strong as a rock and hard as nails. An impressive air operated masonry nailer which will drive hardened nails with ease into a whole variety of hard surfaces such as brick, light concrete, insulating blocks, screed and plaster. The range of nail length, from 25mm to 64mm and the 80 nail capacity quick loading magazine make it a natural for second fix work. There is the usual safety latching system and the air exhaust outlet directs the exhaust to the front. Light in weight, safe to use and extremely reliable, this nailer can save a huge amount of time on site as so many tasks can be done with just one tool. The tool has a 1/4” BSP female inlet, a male Euro fitting is provided. 5 cfm / 141.6 l/m
Air Consumption Operating Pressure
85 to 115 psi / 5.9 to 7.9 bar 1/4” BSP
Inlet
80 nails
Load Capacity
3.2 kg
Weight
Inc.vat
Ex.vat
AT2564MN Masonry Nailer 25-64mm
£138.68
£115.57 106165
Code
38mm Nails (Qty 1,000) 45mm Nails (Qty 1,000)
£12.68 £15.28
£10.57 900127 £12.73 900128
50mm Nails (Qty 1,000) 64mm Nails (Qty 1,000)
£16.58 £20.48
£13.82 900130 £17.07 900136
AT5090FN Framing Nailer 50-90mm Just the job for trusses, decking, framing and sheeting. Exceptionally light and strong due to its magnesium alloy casing. It fires collated 28° clipped head nails from 50mm to 90mm with a diameter from 2.9mm minimum, to 3.76mm maximum. The nailer has a fast loading magazine with load sight and maximum capacity of 84 nails (two strips). Its handle has a rubberised grip for user comfort, especially useful for shock absorbing and a variable position air exhaust vent. Supplied with two triggers to allow single action firing only (to prevent a double firing) or the faster bump feed firing action. Also it comes supplied in a sturdy case with safety goggles, service tools and lubrication oil. Please note that this nail gun requires a compressor capable of delivering 7cfm minimum. The tool has a 1/4” BSP female inlet, a male Euro fitting is provided.
AT0622WS Wide Crown Stapler 6-22mm Suitable for long periods of continuous use. This stapler uses 20 gauge (0.9mm) wide crown (11.2mm) staples and in lengths from 6mm to 22mm. Primarily used for upholstery, it can be used for many other similar trades. Supplied with a swivelling exhaust air vent. The tool comes supplied with a 1/4” BSP inlet, a male Euro fitting is provided.
86
Air Consumption Operating Pressure
Operating Pressure
60 to 95 psi / 4.1 to 6.6 bar 1/4” BSP
Inlet
84 nails
Load Capacity Overall L x W x H
215 mm x 82 mm x 135 mm 3.5 kg
Weight
AT5090FN Framing Nailer 50 - 90mm 50mm Nails (Qty 2,000) 60mm Nails (Qty 2,000) 75mm Nails (Qty 2,000) 90mm Nails (Qty 2,000)
Inc.vat
Ex.vat
£257.98 £36.68 £38.78 £52.18 £75.48
£214.98 106167 £30.57 100073 £32.32 100074 £43.48 100075 £62.90 340331
Code
4 cfm / 113.3 l/m 65 to 95 psi / 4.5 to 6.6 bar 1/4” BSP
Inlet
100 staples
Load Capacity
1.25 kg
Weight
AT0622WS Wide Crown Stapler 6-22mm 6mm Staples (Qty 5,000) 8mm Staples (Qty 5,000) 10mm Staples (Qty 5,000) 13mm Staples (Qty 5,000) 16mm Staples (Qty 5,000) 19mm Staples (Qty 5,000) 22mm Staples (Qty 5,000)
7 cfm / 198.2 l/m
Air Consumption
Inc.vat
Ex.vat
£56.28 £4.38 £4.88 £5.48 £6.58 £7.78 £8.88 £9.68
£46.90 £3.65 £4.07 £4.57 £5.48 £6.48 £7.40 £8.07
Code 106168 340310 340311 340312 340313 340314 340315 340316
Find the right tool for the job from over 15,000 products at axminstertools.com
82-91_Compressors_Nailers_Spray_Systems_2020.indd 86
17/08/2020 08:53