MORTICERS
AT25BM Bench Morticer For all your square hole needs. The Axminster Trade AT25BM is a rugged and compact bench mounted chisel morticer almost entirely made from cast iron. The strong heavy-duty construction gives the machine a 25mm softwood, 19mm hardwood capacity. A single handwheel controls both longitudinal and lateral table movement. This system makes controlling the movement a breeze and prevents the table from skewing. The table has a tall back fence, which has lateral stops at the rear for repeat morticing; the machine also has a depth stop which includes a haunch stop. The multiple position material clamp can accommodate different workpiece widths. The downfeed lever provides the correct leverage and good feedback as the cut progresses. A gas strut provides smooth downward travel of the headstock and also allows headstock “parking” in any position. There is an optional floor stand, plus also a very useful door morticing attachment, perfect for door fittings. This machine is well suited to the busy trade workshop and will provide many years of accurate and trouble-free service. It accepts chisels with either 3/4” or 13/16” shanks.
£959.96 Ex.vat: £799.97 Code: 105644 Gas strut provides balance for smooth downward
Lateral stops for repeat morticing, depth stop and haunch stop
Accepts chisels with either 3/4” or 13/16” shanks
25mm capacity in soft wood, 19mm in hard wood
Single handwheel controls both table movements Strong, heavy duty, cast iron construction Power Voltage
750 W
Max Chisel Size Softwood
25 mm
230 V
Max Chisel Size Hardwood
19 mm
Chisel Stroke
125 mm
Overall L x W x H
Centre of Chisel to Back Fence
110 mm
Weight
460mm x 515mm x 1,000mm 85kg
Max Height of Timber with 12.7mm Chisel and Bit 190 mm
Axminster Drill Chuck & Adaptor for Morticers Another string to the bow. Turn your morticer into a small, useful pillar drill. Replace the chisel and bit with this 1/2” capacity drill chuck. Supplied complete with a 25mm (1”) shank bush to fit most morticers. Drill Chuck & Adaptor
Inc.vat
Ex.vat
£21.98
£18.32 400287
Code
Japanese Pattern Mortice Chisels & Bits Nothing cuts a cleaner mortice. The Japanese pattern design could well reflect the use of softer timbers used in traditional Japanese furniture making, the auger having a deep, high ratio flute, quickly removing the longer slivers softwoods create. The auger bit on this type has a point on the end, one cutting spur and a single spiral for rapid chip clearance. The single spur is easy to sharpen and the bits cut evenly and fast, even in the hardest of timbers. The chisel is finely ground and slightly tapered from the tips by 0.1mm to allow easy removal from the mortice. A deep waste slot prevents the waste material becoming jammed around the auger. These mortice chisels and bits are made from the finest Japanese carbon steels, selected as ideal for these tools. Often imitated but never equalled. Either way, a high quality chisel will enhance your morticer’s performance to a degree where once tried you will never use a low quality chisel again. Admittedly, they are a big investment, but, what a difference! N.B. As all the auger bits have to accommodate different machines they are supplied long and will need cutting with a conventional hacksaw blade to suit the specific machine for which purchased. Chisel size
Axminster Trade AT25BM Bench Morticer Door Morticing Attachment A big time saver for door production. This attachment allows the cutting of door lock mortices etc, whilst holding the door firmly. The column/headstock on the morticer swivels 180° to swing the mortice chisel over the door. With the morticer mounted on its optional floor stand, a full 1m wide door will fit into the attachment. Obviously, when the morticer is bench mounted this width may vary. Easy to fit and comes with an adjustable door clamp.
AT25BM Bench Morticer Door Morticing Attachment
Inc.vat
Ex.vat
Code
£76.28
£63.57 105646
Axminster Trade AT25BM Bench Morticer Stand Free up vital bench space. Sturdily made to take the weight of this morticer, it is supplied with rubber feet. It gives a machine table height of 825mm, which is a good, comfortable height. It also allows the fitting and use of the optional Door Morticing Attachment (105646). AT25BM Bench Morticer Stand
Inc.vat
Ex.vat
£147.48
£122.90 105645
Code
Metric 6mm 8mm 10mm 12mm 16mm 20mm 3mm 3.9mm 5mm 6mm 8mm 10mm 12mm 16mm 20mm Imperial 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 1”
Chisel mount size
Inc.vat
Ex.vat
3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 13/16” 13/16” 13/16” 13/16” 13/16” 13/16” 13/16” 13/16” 1 & 13/16”
£54.58 £54.58 £57.78 £67.38 £76.98 £95.78 £59.48 £59.48 £51.68 £54.58 £54.58 £57.78 £67.38 £76.98 £95.78
£45.48 £45.48 £48.15 £56.15 £64.15 £79.82 £49.57 £49.57 £43.07 £45.48 £45.48 £48.15 £56.15 £64.15 £79.82
702716 702717 702718 702719 702720 702721 507314 507315 507316 510295 510296 510287 510288 510289 510290
13/16” 13/16” 13/16” 13/16” 13/16” 1 & 13/16” 1 & 13/16”
£54.58 £54.58 £57.28 £67.38 £76.98 £96.28 £121.48
£45.48 £45.48 £47.73 £56.15 £64.15 £80.23 £101.23
510286 510293 510292 510285 510294 510291 510284
Free delivery on orders over £45 (UK mainland only) under £45 just £3.95
46-52_Morticers_Spindle_Moulders_2020.indd 47
Code
47 10/08/2020 16:29